Smart Garage Controller 3M Stickers

Screws

Line Holders Ties

2.Power up all device, you will see the lights on the module automatically switch from red

to slow flashing blue, which means the device has been powered up successfully.

1.Turn off all power, use the included Red & Black wire connect the device to your module.

3.Click the button in the device, your garage door should be activated.

During pairing process, make sure that your IOS or Android device and the garage are within your 2.4G WiFi coverage.

After installing the garage door controller, press and hold the ‘reset’ button for five seconds until the blue light goes from slow to rapidly blink.

Launch APP, tap the icon “+” In the upper right corner of the interface.

Select the “All Devices” → Slecet the “Wi-Fi Connector” type.

Tap “Confirm indicator rapidly blink”.

Input the correct 2.4G WiFi passwords. Then, tap Comfirm.

Open Alexa APP, tap the upper left corner on the menu .Go to Skills.

Enter “Smart Life” in the search field and search it.

Voice commands:“Alexa,turn on (device name)”“Alexa,turn off (device name)”“Alexa,is the(device name) closed?”

Voice commands:“Hey Google,turn on (device name)”“Hey Google,turn off (device name)”“OK Google, is (device name) ON or OFF?”

Tap “Smart Life”.

Tap “Smart Life”.

Tap Home control.

Under Devices,tap the + icon.

Launch Google Home app, tap the menu.

Launch IFTTT APP, tap Search. Enter“Smart Life” to search.

Enter “Smart Life” page.

Then you’ll need to enter your own IFTTT account and log in.

Go to My Applets, tap “+” to createyour own appler.

Enable the skill.

Enter your account information andtap on ‘log in’ to link your account toyour Amazon account.If your accountis a phone number, you should selectyour country. If your account is an email address, please select a randomcountry/region code.

More setting: Select routines to creat a single command, which you can perform a series of actions. Like when you open the garage door, the Alex will also trun on your light and report the weather.

Enter your account information andtap on ‘log in’ to link your account toyour Google account.If your accountis a phone number, you should selectyour country. If your account is an email address, please select a randomcountry/region code.

It will auto-connect with the device. Once the process is completed, it willprompt that you can rename the device. Enter a new name and Save.

*Please keep your door closed at first, the garage door will be activated if added successfully (when the blue LED stop blinking).

Brackets

If this test fails,your device may not be compatible. Please check additional

installation Instructions and the list of compatible models, and contact us online

directly.

Do this installation After you successfully added the device to your app.

If it is hard to install with screws, you can also use the 3M gums to finish.

If you are worried that this is not firm, you can use both screws and 3M gums.

Insert the 2.0mm terminal of the sensor to the garage, then install the sensor well

and the magnet of the gap within 3mm to 15mm on your garage door

with screws/bracket/3M gums/wall nail/line holders/ties.

Black

Red

Packing List1

1

2

3

4

5

Test Device For Module Compatibility Checklist before using the device

*Keep your garage door closed

INSTALLATION

1st Step: Power up the garage door controllerand connect to the garage door motor.

2nd Step: Connect to the garage door.

Add Device

Works With Alexa Works With Google Home Works With IFTTT

If the test is ok, then you can control the garage door through the module every time!

Your smart phone or tablet should have connected a 2.4G WiFi with internet.

Download the APPs: “Smart Life” APP from APP Store or Google play store.

Make sure your router is MAC-open. If not, please cancel the router’s MAC filteringsetting first.

The device only supports 2.4G Wi-Fi. If you use a 5G router (it provides two Wi-Fi

signals: 5G and 2.4G ), please select the 2.4G Wi-Fi to connect your smart phone.

*The APP can add many different types of devices together.

ON: The door is opened.You can tap the icon to turn off.

OFF: The door is closed.You can tap the icon to turn on.

Offline: Fail to control.

Wi-Fi SMARTGARAGE DOOR CONTROLLER

Module

Tap here to enter

the full function

operation interface.