workbench no es parecido

TAW12 2/3ABAP Workbench Concepts

1 A commit work is issued in a transaction that employs asynchronousupdating, what takes place.

(More than one answer is correct)

SAP LUW is concludedUser is notified of updatesDatabase commit is triggeredUpdate requests are processed

2 Which statements are true about table controls?


Table control rows are scrollableThe sort option is automatic and can be controlled bythe userPage scrolling using the standard toolbar is automaticand can be controlled by the userColumn sizing is adjustable and can be controlled bythe user

3 F4 is pressed for a screen field. What is the order of precedence thattakes place. Assume that all

a)The corresponding check table will bereferenced and displayedb)Process on Value-Request is executedc)A search help is referenced and displayedd)The corresponding domain values will bedisplayed

d, a, c, bb, d, a, cb, c, a, da, b, c, d

4 What is true about both synchronous and asynchronous RemoteFunction Calls.

TAW12 2/3 ABAP Workbench Concepts

1


The function module forms its own Database LUWThey are executed on another R/3 database serverAll parameters must have a dictionary referenceThe remote function will continue to execute even ifthe caller is no longer active

5 Which Number range function would you use to determine if an externalnumber lies in a specified number range interval.

NUMBER_GET_NEXTNUMBER_RANGE_INTERVAL_LISTNUMBER_GET_INFONUMBER_CHECK .NUMBER_RANGE_EXTERNAL_CHECK

6 What is true about the following code

CHAIN. Field: Flight, Carrid. Module Validate on Chain-InputENDCHAIN.

The Module Validate is processed if at least one of thefields FLIGHT or CARRID are other than the initialvalueThe Module Validate is processed only if bothFLIGHT and CARRID are initial valuesThe Module Validate is processed if both FLIGHTand CARRID are other than the initial valueThe Module Validate is never processed

7 Mark the invalid program text element.

Selection TextsParameter TextsText SymbolsTitles/Headers


2

8 What attribute on an update task function module determines howupdate requests are processed

Processing typeFunction TypeFunction GroupApplication

9 Your dynpro has a table control. It also makes use of the field statement.What is the order of data transport in the PAI (from the screen to ABAP)

Field statement fields, Table control fields, remainingfieldsDictionary Fields followed by Program FieldsTable control fields, Field statement fields, Allremaining fieldsAll fields except table control and field statements,Table control fields, Field statement fields

10 Identify the synchronous update techniques.


CALL FUNCTION in Update TaskPERFORM.. .. ON COMMIT and WAITCOMMIT WORK AND WAITUpdate table.. ..

11 Mark the invalid flow logic statement.

10 PROCESS BEFORE OUTPUT.20 MODULE SET_STATUS_0100.30 Set Titlebar 'ABC'. 40 CALL SUBSCREEN SUB INCLUDING 'SAPMZABC' '110'.50 LOOP.60 MODULE CHECK_LOOP.70 ENDLOOP.

80 PROCESS AFTER INPUT.90 MODULE USER_COMMAND_0100.


3

100 FIELD FLIGHT MODULE CHECK_FLIGHT ON-REQUIRED.


50302010040

12 How many Modification Groups are allowed per screen field .

13Unlimited24

13 Defining a Lock Object as Exclusive would specify what kind of locking

Prevents a single user with read-write access fromattaining further locks to the same set of table rows.This is useful when you are using recursive routines tomake updates.Gives a single user read and write access to thespecified table rows. No other users may access therows.

allows multiple users to access the specified tablerows, but with read-access only. No write-accesses areallowed at any time.

14 How would you define a lock object

Create it as an object in the dictionaryUse the Data BrowserThrough a Function Call

15 Where is the current active tab page stored for a tabstrip


4

Tab stripOK_CodeFunction CodeACTIVETAB

16 How do you determine the Parameter ID for a screen field

Check the Value statement in the Top IncludeCheck users defaultF1, Technical Info on the screen fieldCheck table TPARA

17 Mark the one component that is NOT part of a dynpro

Flow logicScreen layoutModule PoolElement ListScreen attributes

18 The Scope Parameter for your lock object function module has been setto 2. What does this imply..


An update termination error holds the locksLocks generated in the dialog program are passed onto the update programYou must release the locks programaticallyThe locks are automatically released when the updatescomplete

19 What makes up a dialog step

One sequence of a PAI followed by a PBOOne sequence of a PBO followed by a PAI


5

All ABAP Modules of a screenAll PBO and PAI modules in the Module pool

20 What steps would be required to define a Tabstrip in your Dialogprogram.


Place a tabstrip object on your screen using ScreenPainterDefine Pushbuttons on the subscreen areaName your tabstrip objectDeclare a Tabstrip control in your global top include

21 What is true about context menus


A subordinate output field in a table control inheritsthe context menu of the table controlContext Menus are assigned to input fieldsThey are a special GUI StatusA subordinate input field in a subscreen causes thesubscreen to inherit the context menu of thesubordinate field

22 Which of the following will change the contents of the data cluster thatcorresponds with memory id 'MYID'.


CLEAR MEMORY ID 'MYID'IMPORT ABC TO MEMORY ID 'MYID'FREE MEMORY ID 'MYID'EXPORT ABC TO MEMORY ID 'MYID'

23 What is proper coding practice in the flow logic of a Dynpro when asubscreen is defined on the screen


6

Call Subscreen in the PBO onlyThe Call Subscreen statement is not requiredCall Subscreen in the PAI onlyCall Subscreen in the PAI and PBO

24 What makes up a Tabstrip .


Function KeysTab TitleSubscreensSubscreen AreaTabstrip Menu Bar

25 What type of memory is retained for the duration of an external session.

ABAP/4 memoryExtended memorySAP memory

26 What needs to be coded if you want to branch to report program ABCfrom a dialog program, but you do not want the user to see the selectionscreen

CALL ABC WITH CARRID = W_CARRIDSUBMIT ABC WITH CARRID = W_CARRIDSUBMIT ABC VIA SELECTION-SCREEN.SUBMIT ABC AND SKIP FIRST SCREEN.

27 What class is used for method load_gui_status in a context menu

cl_ctmenumenu_classcl_context_clascl_menu


7

28 A complex data object must be declared in your Top Include for a tablecontrol. What is it's TYPE ?

CXTABTableTableControlTableView

29 What happens when number range interval buffering is active forinternal numbers.


Duplicate numbers will never be encountered in thesystema programmer can choose to ignore buffering onrequestThe numbering sequence is contiguousperceived improved performance can be achieved

30 Mark the items that are true with the Asynchronous Update technique ina SAP LUW.


Update task functions are logged in the SM12 logtablesAll updates are performed or none at allRequests are not passed directly to the DBYou can combine update requests from consecutivedialog stepsCOMMIT concludes the SAP LUW

31 A SET UPDATE TASK LOCAL is issued in the dialog program. Whateffect does this have on updating.


8


A new dialog work process is used for the updateprocessUpdate requests use shared memoryCluster tables are used to processing the updaterequestUpdate requests do not use the VBLOG table

32 What is required in the flow logic in order to process a table control?

A loop .. endloop statement for the table control inboth the PBO and the PAIA loop .. endloop statement for the table control onlyin the PAIA loop .. endloop statement for the table control onlyin the USER_COMMAND moduleA loop .. endloop statement for the table control onlyin the PBO

33 What is needed in your tabstrip to have scrolling take place on theapplication server

Assign Function Type = PAssign Function Type = SpaceAssign Function Code = SpaceAssign Function Code = P

34 What technique is used to ensure remote functions are still processedeven if the partner computer is not active.

Transactional RFCAsynchronous RFCSynchronous RFC

35 If you trigger a lock object and it is already locked by some other user,what exception would be raised?.


9

01 - Foreign_Lock03 - Already_Locked08 - General_Failure02 - System Failure

36 What is required for a Radio Button Defined on a screen to work in amodule pool:

Ensure the radio button is selected in the screenYou should declare a corresponding one charactervariable in your TOP includeNothing else is requiredYou should declare a corresponding one charactervariable in the Screen Flow

37 What are the minimum requirements for Processing User requests in aDynpro.


The last field of the element list of the screen has thename OK_CODEOK_CODE is Defined in the TOP IncludeOK_CODE Checking is performed in the Screen FlowLogicDefine a GUI Status

38 Refer to the following code. How would you program a generic lock onall rows of a table that have key values 'AA', '111' for the first 2 fields

Call Function Enqueue_ESMYLOCK ExportingField1 = Field2 = Field3 =

Field 1 = AA, FIELD2 = 111, Field3 = SpaceField 1 = AA, FIELD2 = 111, Field3 = InitialIt is not possible in this caseField1 = Generic, Field2 = Generic, Field3 = Space

39 Transaction 'ZABC' contains mandatory fields on the first screen. A


10

Dialog program issues the statement CALL Transaction ZABC and SkipFirst Screen. What is required in the first screen of transaction ZABC forthe call to function properly.

The mandatory fields must be filled in with "SetParameter" statement or default values in TransactionZABCThe mandatory fields must be filled in with "GetParameter" statement or default values in TransactionZABCExport the screen fields to memoryThe first screen in transaction ZABC can indicate thatmandatory fields do not need to be filled in if calledby another transaction

40 In a dialog program, what coding technique allows passing of all therows of the internal table T_BOOKING to the program namedRSPGM101

IMPORT T_BOOKING TO MEMORY ID MYID.SUBMIT RSPGM101.SUBMIT RSPGM101 WITH BOOKING =T_BOOKING.SET PARAMETER ID BOK FIELDT_BOOKING. SUBMIT RSPGM101.EXPORT T_BOOKING TO MEMORY ID MYID.SUBMIT RSPGM101.

41 ProgramA makes a call to ProgramB with

0132

42 The user can customize the look of various table control values? Whichof the following can the user adjust?


11


The width of a column ,The Column headingThe order of the columnsThe horizontal grid can be set off/on

43 What Functions are generated on the Activation of Lock ObjectEZMARA.


ENQUEUE_EZMARADEQUEUE_EZ_MARADEQUEUE_EZMARAENQUEUE_EZ_MARA

44 A screen field has been dynamically changed in a dialog program. Whendoes it get re-initialized.

At the end of the transactionAt PAI executionAt PBO executionOnly when the program encounters more code tomodify the field attributes

45 What statement will start a new internal session in the same externalsession.


SubmitLeave to transactionSubmit.. .. and ReturnCall Transaction

46 When defining a new Dialog Program, what is the first thing you areprompted for


12

ApplicationLogical DatabaseScreensTop Include

47 What ABAP statement discards update task requests.


Call Function in Update TaskROLLBACK WORKMessage A101UPDATE

48 What table fields are required as lock arguments in a lock object

The Primary Key FieldsAny Primary Key FieldsThe Foreign Key DependanciesAny Primary Key Fields and Any Secondary KeyFields

49 Which line of code is valid for the use of table control BOOKING_TCin screen 200

controls: booking_tc using screen 200. " IN THE TOPINCLUDELOOP AT BOOKING_TAB WITH CONTROLBOOKING_TC CURSORBOOKING_TC-CURRENT-LINE. ENDLOOP. "INTHE PAILOOP AT BOOKING_TC.ENDLOOP. "In the PBO.controls: booking_tc type tableview using screen 200."IN THE TOP INCLUDE

50 Refer to the following code. Module CHECK_FIELD_CD raises anError Message. When the user changes the entry in response to the error,where in the PAI event does processing resume


13

process after input. 10 module exit at exit-command. module back.

20 field a module check_field_a. 30 field b module check_field_b.

40 chain. field: a, b, c. module check_field_abc. endchain.

50 chain. field: c, d. module check_field_cd.

Generic Lock KeysA Dictionary TableFunction Modules

54 What order is recommended when setting and releasing locks in yourprogram

lock data, read data, update database, release lockslock data, read data, release locks, update databaseread data,lock data, update database, release locks

55 What happens when a user presses F1 on a screen field

The system will display the documentation of the fieldto which a screen field refersThe system will display the documentation of the dataelement to which a screen field refersThe system will display the documentation of thedomain to which a screen field refersThe system will display the technical information ofthe field to which a screen field refers

56 What must be assigned to a module pool in order for it to be executed

ModuleProgram TypeTransactionEvent

57 When a COMMIT WORK is issued, in what order does processingoccur. Refer to the following code

1. Dialog-task FORM routines logged with PERFORM. ON COMMIT.2. High-priority (V1) update-task function modules.3. Low-priority (V2) update-task function modules.

2, 3, 11, 2, 3


15

3, 2, 1

58 What is true about subscreens.


You can also specify the subscreens dynamically atruntime.Multiple subscreens are possible in a single screen.Can set their own GUI statusCan set their own titlebarhave their own OK_CODE

59 Using screen painter, how do you logically relate Radio Buttons

Define a Group boxEnsure the prefix name of the radio buttons is thesame

Make sure each one has the same Screen Group NameEncompass them in a Radio Button Group

60 Three Locks have been set in a Transaction. What are methods thatwould cause the release of all three.


CALL FUNCTION DEQUEUE_ALLCommit WorkReset CommandEnd the TransactionProgram ends abnormally

61 What are some essential steps for logging changes made to SAP data.


Create a function to update tables CDHDR andCDPOS


16

Call the generated change doc function (i.e.obj_write_document) in an ABAP programDefine a change document objectMark the change document flag on the domain of thefield where logging is required

62 Which function would you use to retrieve a number from an internalnumber range.

NUMBER_RANGE_INTERVAL_LISTNUMBER_GET_INFONUMBER_RANGE_EXTERNAL_CHECKNUMBER_GET_NEXT

63 What table is used to store transaction codes.

txncodeststcttstctxn

64 Screen 200 follows screen 100. Screen 100 is displayed with GUI Status'BASE'. Screen 200 is then displayed without issuing the SETPF-STATUS what will take place

Status 'BASE' is displayedScreen 200 is displayed without a status.Standard List StatusRun Time Error

65 Which of the following corresponds to the command entry /ntcod?

LEAVE PROGRAMSUBMIT TRANSACTION tcodLEAVE TO TRANSACTION tcodCALL TRANSACTION tcod


17

66 Mark the valid name for a 'text field' in screen painter

!mytext?mytext_mytext

67 Refer to the following Code. An E(rror) or W(arning) message is issuedin the PAI of a dynpro. What does not take place.

Field MYTAB-RESERVATION ModuleValidate_Reservation.

The system places the cursor in the error fieldThe Message is displayedThe field is ready for input againScreen is RedisplayedPBO is reprocessed

68 What is true about Perform On Commit.

Parameter passing is allowedCommit Work is allowed in the formMultiple calls to a FORM result in single execution ofthe FORMRollBack Work is allowed in the FORM

69 Which does not provide synchronous processing.

PERFORM.. .. ON COMMITBatch Input Programsan update-task function module triggered withCOMMIT WORK AND WAITan update-task function module triggered withCOMMIT WORK

70 After a user action is performed, what event is triggered in a dialogprogram


18

Case OK_CODEPBOModule User_commandPAI

71 Refer to the following code. Module CHECK_FIELD_CD raises anError Message. Mark the Field(s) that are Open For input.

process after input. 10 module exit at exit-command. module back.

20 field a module check_field_a. 30 field b module check_field_b.

40 chain. field: a, b, c. module check_field_abc. endchain.

50 chain. field: c, d. module check_field_cd.


The invoking module pool still retains control ofexecutionData available in the dialog program must be passedto the listEnables processing of ok_code functionsEnables execution of interactive reporting eventsThe CALL SCREEN xxx statement is possible

74 Which statements would conclude a SAP LUW.


ROLLBACK WORKMESSAGE S101CALL TransactionCOMMIT WORK

75 The following statement 'Message S001(AT)' is issued in a PAI moduleof a Dynpro. Where does the message appear ?

After the AT-EXIT ModuleOn the same screenIn the System LogOn the next screen

76 CALL TRANSACTION has been issued in an ABAP. What code in thecalled transaction will return to the point of call .

Stop ProgramLeave to TransactionLeave ProgramExit.

77 Screen 100 calls screen 200. Screen 200 makes a request to perform listprocessing with the suppress dialog option. Where does processingresume after returning from the list.


20


There is no return if the statement LEAVE TOLIST-PROCESSING is usedTo the beginning of the transactionTo the next screen defined in the screen attributes ofscreen 100To the next screen defined in the screen attributes ofscreen 200If LEAVE TO LIST-PROCESSING AND RETURNTO SCREEN xxx is used, return will go to screen xxx

78 After changing a field attribute in a dynpro , what statement is used toactivate the change.

COMMITSETMODIFYACTIVATE

79 What transaction is used to handle termination updates

SM13CCMSSE80SM12

80 Your screen has a table control defined to it. In the PAI, what does theSY-LOOPC system variable contain.

Number of filled linesLoop CounterNumber of table control lines

81 If you want to work with the standard number range functionality, youonly need the function modules in the function group


21

SNR1SNR3SNR2SNR4

82 When are V2 updates processed

After all V1's are completeParallel to relative V1'sAfter each related V1Before V1's are started

83 Which is not an automatic check carried out by the Screen Processor.

Obligatory Field CheckFixed Valuesformat CheckForeign Key CheckParameter Id Validation

84 How does a Perform on Commit differ from a Perform statement


subroutines called using on commit pass parametersby value onlysubroutines called using on commit pass parametersby reference onlysubroutines called using on commit have no interfacesubroutines called using on commit use global dataonly

85 In PBO, what field contains the total number of lines in table controltc_flight

SY-STEPL


22

SY-DYNNRTC_FLIGHT-TOTAL_LINESTC_FLIGHT-LINES

86 What is true about Dialog programs.


update and enqueue techniques are important.Transactions are a vehicle to execute dialog programsDialog Programs do not require a transaction toexecute the module poolScreens are optional in a dialog program.The flow logic is contained in Modules

87 What methods could be used to specify the next screen to be displayed.


Loop at ScreenUse the Next Screen Option on the Screen AttributesSubmit ScreenSet Screen

88 To handle user requests in a dialog program, you must assign functioncodes to the relevant screen and window elements in the Screen Painterand Menu Painter. Mark the element that does not contain a functioncode.

Containermenu functionstool-bar pushbuttonsScreen Pushbuttons

89 Where should the CANCEL (Red X) button on the standard toolbar takethe user

To where the transaction was called


23

To the initial screen of the transactionTo the Cancel areaTo the previous screen

90 Where does the Modification GROUP assignment of fields get defined.

Do you really careUsing the SET GROUP statementIn the screen painterIn the Dynpro

91 Which Statement Interrupts processing of Current screen.

Leave ScreenCall Screen 100Set Screen 100Leave to Transaction

92 What is a context menu

A special menu for subscreensShortcuts for frequently used functionsFunctions that are relevant for the current ScreenGroupContext Sensitive Pushbuttons

93 Mark the Program Attribute that is used to define a Dialog Program

DM1R

94 What is the sequence of events and order of data transported in thefollowing code. Select the correct order


24

Process After Input Module Exit at exit-command Field ABC Module Validate_ABC.

10 All fields not defined in FIELD statements20 System performs Auto Field Checking30 Fields in FIELD Statements

10, 20, 3020, 10, 3020, 30, 10

95 What would trigger a rollback.

An RFC Function Call that terminates normallyA program that issues a MESSAGE type 'A'.A user cancels the transactionA program that issues a Commit Work statement

96 What field is not mandatory when creating a transaction.

ProgramTransaction TextScreen NumberAuthorization Object

97 What is true about V2 updates within the same SAP LUW

V2 errors cause V1 updates to be rolled backThey are usually time critical updatesAn error in one V2 function module cause all otherV2 functions to be rolled backEach V2 function module for a given COMMITWORK always runs in its own (separate) DB LUW

98 Indicate the functions that are capable of transporting data to screenfields.


25


F4IF_FIELD_VALUE_REQUESTDYNP_VALUES_READDYNP_VALUES_UPDATEDYNPREAD

99 How many times would the form 'calculate_sales' be executed ?

Do 5 times. x = sy-tabix. perform calculate_sales on commit.enddo.COMMIT WORK.

Infinitely1Not at all5

100 What attribute in a table control must be defined in order to activate rowselection functionality

TOP_LINEFunction codeLINE_SEL_MODEw/selcolumn

101 In what case are Tabstrips good candidates.


When Users need the ability to navigate freelybetween componentsWhen several components of an application need to bedisplayed on one screenWhen Navigation between components ispre-determined in a fixed manner

102 If you do not SUPPRESS DIALOG in a dynpro before you LEAVE TO


26

LIST-PROCESSING, the following will happen:


The screen will be displayed, and will be emptyThe screen will be displayed with the report that wasbuilt, but the gui-status will be the one from theprevious screenThe report will be displayed on the screen only afterthe user presses the enter keyThe previous screen (calling screen) will beredisplayed

103 How could you reset the program context of your program


End the dialog programIssue a termination message (type A)Issue a COMMIT WORK statementIssue a ROLLBACK WORK statement in the program

104 What would be a reason for choosing to use asynchronous updates inyour ABAP program.


your program need the updates completed in order tocontinue processingTo improve user response timeImmediate updates to the Database are requiredyour updates need to run together as a logical unit

105 Where would you typically program dynamic screen changes.

PAI screen event in Flow logicIn a PBO moduleIn a PAI ModulePBO screen event in Flow logic


27

106 What will cause the system to implicitly trigger database commits.


Message I001.CALL SUBSCREENAt User-CommandExit the TransactionCALL TRANSACTION

107 What is true about using memory to pass data


ABAP memory is local to each external sessionABAP memory is used to pass data between theexternal sessions of an internal sessionABAP memory can be accessed by SAP memorySAP Memory can be accessed by all external sessionsEach external session has its own ABAP memory

108 What type of memory is typically used as default values for screen fields

ABAP/4 memoryShared MemorySAP memory

109

SynchronousAsynchronousBatchDirect

110 What table do you automatically get in a dynpro without having todeclare it in your module pool


28

Sy-TableSubscreenScreenScreen_ITAB

111 If you are building a tabstrip to be handled at the presentation level,what function type should be assigned to the tab title

FBlankPET

112 The standard function key used for displaying a list of possible values is:

F3F2F4F1

113 What makes up an ABAP Transaction.


Function ModulesTxn CodeDictionary ObjectsABAP ProgramGUIUser Dialogs

114 What is true about calling a screen.



29

Screens can be called from PAI modulesA screen can be called from a report program.A screen can be called from within a function moduleScreens should be called from PBO modules

115 Why is it a good idea to use a backup version of the OK_CODE i.e.SAVE_OK_CODE = OK_CODE

To prevent accidental setting of the OK_CODE in adifferent screenSo the OK_CODE is freed up for subscreensBecause the OK_CODE gets reset at the beginning ofeach execution of PAI processingOK_CODE is a system reserved variable and cannotbe accessed directly

116 Which update request always run asynchronously

TransactionalV2V1Local

117 How many At Exit-Command Modules are allowed in the PBO

01Unlimited2

118 What is true about a number range assigment

The range consists only of numericsA number range can be defined as both internal andexternal.A number range is used only for transactionaldocumentsA number range can be character only


30

119 What statement in Dialog Programming makes screen fields availablefor input.

FieldCheckCaseModule

120 When would you use one of the the F4_IF* functions

In the module that perform OKCODE processingIn the PAI when Process on Help-Request dialogevent is tgriggeredIn the PAI when Process on Value-Request dialogevent is triggeredIn the PBO when Process on Value-Request dialogevent is triggered

121 What statement allows you to generate a report from an onlinetransaction

CALL REPORT report_nameLEAVE TO BASIC LISTGENERATE listLEAVE TO LIST-PROCESSING

122 What is the difference between call screen and set screen

There is no differenceCall screen executes and returns to the point of call.Set Screen does notCall Screen is used only for external screens. Setscreen is only for screens in the same module poolSet screen executes and returns to the point of call.Call Screen does not


31

123 What includes are generated in module pool SAPMZABC if onlyDYNPRO 100 exists . Refer to the following Flow logic for Dynpro100.

PROCESS BEFORE OUTPUT.* MODULE SET_STATUS_0100.

PROCESS AFTER INPUT MODULE USER_COMMAND_0100.


MZABCO01MZABCTOPMZABCI01USER_COMMAND_0100

124 The OK_CODE serves what purpose

contains function codescontains screen field valuesdetermines successful user action

125 What message type does not implicitly trigger database commits for thetable updates specified in your program

W type MESSAGE statementA type MESSAGE statementS type MESSAGE statementI type MESSAGE statementE type MESSAGE statement

126 Where would you typically see the code

At Line-SelectionAt Selection-ScreenTop-of-PageStart-of-Selection


32

127 How are locks removed from the lock tables

Commit Work statement is issuedThe database breaksThe update task removes them at the beginning of theSAP LUWThe update task removes them at the end of the SAPLUW

128 What is the order of transport in PBO when a table control is defined inyour module pool

Screen fields followed by table control fieldsDictonary Fields followed by Program FieldsAll fields regardless of table control definition aretransported at the beginning of PBOTable control fields followed by the remaining screenfields

129 Which statement will ensure processing returns to the calling point afterthe user presses F3 to exit the list

SUBMIT ZPGMA with selection-set.. ..LEAVE TO LIST-PROCESSINGCALL report AND RETURNSUBMIT ZPGMA and ReturnSUBMIT report

130 What code is required in order to return immediately to the callingscreen


Set Screen 0. Leave ScreenSet Screen 0Leave to Screen 0Leave Program


33

131 Mark the valid asynchronous update bundling technique.

PERFORM .. .. ON COMMITCALL FUNCTION .. .. IN UPDATE TASKUPDATEPERFORM ASYNCHRONOUS

132 What is true about the POH/POV events

After these events are processed the PBO module isprocessed and the screen is redisplayedNone of the answers are correctAfter these events are processed the screen isredisplayed but the PBO is not processedAfter these events are processed the PAI is processedthen the PBO and then the screen is displayed

133 What takes place after each dialog step

The application gathers data for update processingThe SAP LUW is concludedA Commit Work is executedSystem passes a Database commit to the databasesystem


34


workbench no es parecido

Documents