work programme - dps · 2015. 7. 14. · 69. iec 60050-441:1984 international electrotechnical...

1

WORK PROGRAMMEof General Directorate of Standardization - ALBANIA

(Period 1 July to 31 December 2015)

Technical Committee No. 1“Quality assurance and social responsibility”, 10 standards

No. Standard number English title

1. CEN/TS 16555-6:2014 Innovation management - Part 6: Creativity management2. CEN/TS 16555-3:2014 Innovation management - Part 3: Innovation thinking3. CEN/TS 16555-4:2014 Innovation management - Part 4: Intellectual property management4. CEN/TS 16555-2:2014 Innovation management - Part 2: Strategic intelligence management5. CEN/TS 16555-5:2014 Innovation management - Part 5: Collaboration management6. ISO 18091:2014 Quality management systems - Guidelines for the application of ISO 9001:2008

in local government7. ISO/TS 17582:2014 Quality management systems - Particular requirements for the application of

ISO 9001:2008 for electoral organizations at all levels of government8. ISO Guide 30:2015 Reference materials - Selected terms and definitions9. ISO 10002:2014 Quality management - Customer satisfaction - Guidelines for complaints

handling in organizations10. ISO 3951-1:2013 Sampling procedures for inspection by variables - Part 1: Specification for

single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lotinspection for a single quality characteristic and a single AQL

Technical Committee No. 3“Electrical and electronical materials”, 86 standards


1. EN 50160:2010/A1:2015 Voltage characteristics of electricity supplied by public electricity networks2. EN 50216-4:2015 Power transformer and reactor fittings - Part 4: Basic accessories (earthling

terminal, drain and filling devices, thermometer pocket, wheel assembly)3. EN 50250:2002/A1:2015 Conversion adaptors for industrial use4. EN 50290-4-1:2014 Communication cables - Part 4-1: General considerations for the use of cables -

Environmental conditions and safety aspects5. EN 50290-4-2:2014 Communication cables - Part 4-2: General considerations for the use of cables -

Guide to use6. EN 50341-2-19:2015 Overhead electrical lines exceeding AC 1 kV - Part 2-19: National Normative

Aspects (NNA) for CZECH REPUBLIC (based on EN 50341-1:2012)7. EN 50341-2-20:2015 Overhead electrical lines exceeding AC 1 kV - Part 2-20: National Normative

Aspects (NNA) for ESTONIA (based on EN 50341-1:2012)

2

8. EN 50377-17-2:2015 Connector sets and Interconnect components to be used in optical fibrecommunication systems - Product specifications - Part 17-2: Type FPFT (factorypolished field terminated) simplex connector factory terminated with EN 60793-2-50 category B1.3 fibre and field mounted onto reinforced cable containing IEC60793-2-50 category B1.3 or B6a1 or B6a 2 singlemode fibre (with restricted MFD),category C

9. EN 50393:2015 Test methods and requirements for accessories for use on distribution cables ofrated voltage 0,6/1,0 (1,2) kV

10. EN 50411-2-10:2015 Fibre organisers and closures to be used in optical fibre communication systems -Product specifications - Part 2-10: Sealed fibre splice closures type 2, category G,for FTTH optical distribution networks

11. CLC/TS 50549-1:2015 Requirements for generating plants to be connected in parallel with distributionnetworks - Part 1: Connection to a LV distribution network above 16 A

12. CLC/TS 50549-2:2015 Requirements for generating plants to be connected in parallel with distributionnetworks - Part 2: Connection to a MV distribution network

13. EN 50607:2015 Satellite signal distribution over a single coaxial cable - Second generation14. EN 50618:2014 Electric cables for photovoltaic systems15. EN 60071-5:2015 Insulation co-ordination - Part 5: Procedures for high-voltage direct current

(HVDC) converter stations16. EN 60086-4:2015 Primary batteries - Part 4: Safety of lithium batteries17. EN 60092-507:2015 Electrical installations in ships - Part 507 - Small vessels18. EN 60127-3:2015 Miniature fuses - Part 3: Sub-miniature fuse-links19. EN 60317-40:2015 Specifications for particular types of winding wires - Part 40: Glass-fibre braided

resin or varnish-impregnated, bare or enamelled rectangular copper wire,temperature index 200

20. EN 60598-1:2015 Luminaires - Part 1: General requirements and tests21. EN 60598-2-20:2015 Luminaires - Part 2-20: Particular requirements - Lighting chains22. EN 60598-2-21:2015 Luminaires - Part 2-21: Particular requirements - Rope lights23. EN 60598-2-

22:2014/AC:2015Luminaires - Part 2-22: Particular requirements - Luminaires for emergencylighting

24. EN 60630:1998/A7:2015 Maximum lamp outlines for incandescent lamps25. EN 60684-3-284:2014 Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving

- Sheet 284: Heat-shrinkable sleevings, for oil barrier applications26. EN 60684-3-285:2014 Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving

- Sheet 285: Heat-shrinkable polyolefin sleeving, for med. voltage joint insulation27. EN 60702-1:2002/A1:2015 Mineral insulated cables and their terminations with a rated voltage not exceeding

750 V - Part 1: Cables28. EN 60702-2:2002/A1:2015 Mineral insulated cables and their terminations with a rated voltage not exceeding

750 V - Part 2: Terminations29. EN 60793-1-50:2015 Optical fibres - Part 1-50: Measurement methods - Damp heat (steady state) tests30. EN 60794-3:2015 Optical fibre cables - Part 3: Sectional specification - Outdoor cables31. EN 60794-3-10:2015 Optical fibre cables - Part 3-10: Outdoor cables - Family specification for duct,

directly buried or lashed aerial optical telecommunication cables32. EN 60794-4-10:2014 Optical fibre cables - Part 4-10: Family specification - Optical ground wires

(OPGW) along electrical power lines33. EN 60809:2015 Lamps for road vehicles - Dimensional, electrical and luminous requirements

3

34. EN 60810:2015 Lamps for road vehicles - Performance requirements35. EN 60968:2015/AC:2015 Self-ballasted fluorescent lamps for general lighting services - Safety requirements36. EN 61169-50:2015 Radio-frequency connectors - Part 50: Sectional specification for RF coaxial

connectors with inner diameter of outer conductors 4,11 mm with quick locksystem - Characteristic impedance 50 Ohm (type QMA)

37. EN 61195:1999/A2:2015 Double-capped fluorescent lamps - Safety specifications38. EN 61199:2011/A2:2015 Single-capped fluorescent lamps - Safety specifications39. EN 61280-2-2:2012/AC:2015 Fibre optic communication subsystem test procedures - Part 2-2: Digital systems -

Optical eye pattern, waveform and extinction ratio measurement40. EN 61290-10-5:2014 Optical amplifiers - Test methods - Part 10-5: Multichannel parameters -

Distributed Raman amplifier gain and noise figure41. EN 61290-3-3:2014 Optical amplifiers - Test methods - Part 3-3: Noise figure parameters - Signal

power to total ASE power ratio42. EN 61300-2-

50:2007/AC:2015Fibre optic interconnecting devices and passive components - Basic test andmeasurement procedures - Part 2-50: Tests - Fibre optic connector proof test withstatic load - Singlemode and multimode

43. EN 61300-2-51:2007/AC:2015

Fibre optic interconnecting devices and passive components - Basic test andmeasurement procedures - Part 2-51: Tests - Fibre optic connector test fortransmission with applied tensile load - Singlemode and multimode

44. EN 61300-3-53:2015 Fibre optic interconnecting devices and passive components - Basic test andmeasurement procedures - Part 3-53: Examinations and measurements - Encircledangular flux (EAF) measurement method based on two-dimensional far field datafrom step index multimode waveguide (including fibre)

45. EN 61753-031-3:2015 Fibre optic interconnecting devices and passive components - Performancestandard - Part 031-3: Non-connectorized single-mode 1×N and 2×N non-wave-length-selective branching devices for Category U - Uncontrolled environment

46. EN 61755-2-4:2015 Fibre optic interconnecting devices and passive components - Connector opticalinterfaces - Part 2-4: Connection parameters of non-dispersion shifted single-modephysically contacting fibres - Non-angled for reference connection applications

47. EN 61755-2-5:2015 Fibre optic interconnecting devices and passive components - Connector opticalinterfaces - Part 2-5: Connection parameters of non-dispersion shifted single-modephysically contacting fibres - Angled for reference connection applications

48. EN 62026-3:2015 Low-voltage switchgear and controlgear - Controller-device interfaces (CDIs) -Part 3: DeviceNet

49. EN 62031:2008/A2:2015 LED modules for general lighting - Safety specifications50. EN 62035:2014 Discharge lamps (excluding fluorescent lamps) - Safety specifications51. EN 62148-18:2015 Fibre optic active components and devices - Package and interface standards - Part

18: 40-Gbit/s serial transmitter and receiver components for use with the LCconnector interface

52. EN 62271-3:2015 High-voltage switchgear and controlgear - Part 3: Digital interfaces based on IEC61850

53. EN 62275:2015 Cable management systems - Cable ties for electrical installations54. EN 62325-301:2014 Framework for energy market communications - Part 301: Common information

model (CIM) extensions for markets55. EN 62325-351:2013 Framework for energy market communications - Part 351: CIM European market

model exchange profile

4

56. EN 62325-451-1:2013 Framework for energy market communications - Part 451-1: Acknowledgementbusiness process and contextual model for CIM European market

57. EN 62325-451-2:2014 Framework for energy market communications - Part 451-2: Scheduling businessprocess and contextual model for CIM European market

58. EN 62325-451-3:2014 Framework for energy market communications - Part 451-3: Transmission capacityallocation business process (explicit or implicit auction) and contextual models forEuropean market

59. EN 62325-451-4:2015 Framework for energy market communications - Part 451-4: Settlement andreconciliation business process, contextual and assembly models for Europeanmarket

60. EN 62325-451-5:2015 Framework for energy market communications - Part 451-5: Problem statementand status request business processes, contextual and assembly models forEuropean market

61. EN 62343-5-1:2015 Dynamic modules - Part 5-1: Test methods - Dynamic gain tilt equalizer - Gain tiltsettling time measurement

62. EN 62386-101:2014 Digital addressable lighting interface - Part 101: General requirements - Systemcomponents

63. EN 62386-102:2014 Digital addressable lighting interface - Part 102: General requirements - Controlgear

64. EN 62386-103:2014 Digital addressable lighting interface - Part 103: General requirements - Controldevices

65. EN 62629-22-1:2013 3D display devices - Part 22-1: Measuring methods for autostereoscopic displays -Optical

66. EN 62747:2014/AC:2015 Terminology for voltage-sourced converters (VSC) for high-voltage direct current(HVDC) systems

67. EN 62776:2015 Double-capped LED lamps designed to retrofit linear fluorescent lamps - Safetyspecifications

68. IEC 60050-441:1984/A1:2000 International Electrotechnical Vocabulary. Switchgear, controlgear and fuses69. IEC 60050-441:1984 International Electrotechnical Vocabulary. Switchgear, controlgear and fuses70. IEC 60050-442:1998 International Electrotechnical Vocabulary - Part 442: Electrical accessories71. IEC 60050-442:1998/A1:2015 International Electrotechnical Vocabulary - Part 442: Electrical accessories72. IEC 60050-444:2002 International Electrotechnical Vocabulary - Part 444: Elementary relays73. IEC 60050-461:2008 International Electrotechnical Vocabulary - Part 461: Electric cables74. IEC 60050-471:2007 International Electrotechnical Vocabulary - Part 471: Insulators75. IEC 60064:1993 Tungsten filament lamps for domestic and similar general lighting purposes -

Performance requirements76. IEC 60064:1993/A1:2000 Amendment 1 - Tungsten filament lamps for domestic and similar general lighting

purposes - Performance requirements77. IEC 60064:1993/A2:2002 Amendment 2 - Tungsten filament lamps for domestic and similar general lighting

purposes - Performance requirements78. IEC 60064:1993/A3:2005 Amendment 3 - Tungsten filament lamps for domestic and similar general lighting

purposes - Performance requirements79. IEC 60167:1964 Methods of test for the determination of the insulation resistance of solid

insulating materials80. IEC 60169-1:1987/A1:1996 Amendment 1 - Radio-frequency connectors. Part 1: General requirements and

measuring methods

5

81. IEC 60169-1:1987 Radio-frequency connectors. Part 1: General requirements and measuring methods82. IEC 60169-1-1:1987 Radio-frequency connectors - Part 1: General requirements and measuring

methods - Section One: Electrical tests and measuring procedures: Reflection factor83. IEC 60169-1-3:1988/ A1:1996 Amendment 1 - Radio-frequency connectors - Part 1: General requirements and

measuring methods - Section Three: Electrical tests and measuring procedures:Screening effectiveness

84. IEC 60169-1-3:1987 Radio-frequency connectors - Part 1: General requirements and measuringmethods - Section Three: Electrical tests and measuring procedures: Screeningeffectiveness

85. IEC/TR 60071-4:2004 Insulation co-ordination - Part 4: Computational guide to insulation co-ordinationand modelling of electrical networks

86. IEC/TS 60071-5:2014 Insulation co-ordination - Part 5: Procedures for high-voltage direct current(HVDC) converter stations

Technical Committee No. 4“Electrical and electronic devices”, 45 standards


1. EN 62629-1-2:2013 3D Display devices - Part 1-2: Generic - Terminology and letter symbols2. EN 60127-1:2006/A2:2015 Miniature fuses - Part 1: Definitions for miniature fuses and general

requirements for miniature fuse-links3. EN 61439-5:2015/AC:2015 Low-voltage switchgear and controlgear assemblies - Part 5: Assemblies for

power distribution in public networks4. EN 61169-48:2015 Radio-frequency connectors - Part 48: Sectional specification for series BMP R.F.

coaxial connectors5. EN 61439-5:2015 Low-voltage switchgear and controlgear assemblies - Part 5: Assemblies for

power distribution in public networks6. EN 61811-1:2015 Electromechanical telecom elementary relays of assessed quality - Part 1:

Generic specification and blank detail specification7. EN 62271-104:2015 High-voltage switchgear and controlgear - Part 104: Alternating current

switches for rated voltages higher than 52 kV8. IEC 60050-448:1995 International Electrotechnical Vocabulary - Chapter 448: Power syst. protection9. IEC 60050-445:2010 International Electrotechnical Vocabulary - Part 445: Time relays10. IEC 60050-431:1980 International Electrotechnical Vocabulary. Transductors11. IEC 60050-421:1990 International Electrotechnical Vocabulary. Chapter 421: Power transformers

and reactors12. IEC 60050-415:1999 International Electrotechnical Vocabulary - Part 415: Wind turbine generator

systems13. IEC 60050-411:1996 International Electrotechnical Vocabulary - Chapter 411: Rotating machinery14. IEC 60050-411:1996/A1:2007 International Electrotechnical Vocabulary - Chapter 411: Rotating machinery15. IEC 60050-321:1986 International Electrotechnical Vocabulary. Chapter 321: Instrument transformer16. IEC 60092-350:2014 Electrical installations in ships - Part 350: General construction and test

methods of power, control and instrumentation cables for shipboard andoffshore applications

6

17. IEC 60092-307:1980 Electrical installations in ships. Part 307: Equip. - Heating & cooking appliances18. IEC 60092-305:1980 Electrical installations in ships - Part 305: Equipment - Accumulator batteries19. IEC 60092-306:2009 Electrical installations in ships - Part 306: Equipment - Luminaires and lighting

accessories20. IEC 60092-305:1980/A1:1989 Amendment 1 - Electrical installations in ships. Part 305: Equipment -

Accumulator (storage) batteries21. IEC 60092-304:1980 Electrical installations in ships - Part 304: Equipment - Semiconductor convertor22. IEC 60092-304:1980/A1:1995 Amendment 1 - Electrical installations in ships. Part 304: Equipment -

Semiconductor convertors23. IEC 60092-303:1980 Electrical installations in ships - Part 303: Equipment - Transformers for power

and lighting24. IEC 60092-303:1980/A1:1997 Amendment 1 - Electrical installations in ships. Part 303: Equipment -

Transformers for power and lighting25. IEC 60092-301:1980 Electrical installations in ships - Part 301: Equipment - Generators and motors26. IEC 60092-302:1997 Electrical installations in ships - Part 302: Low-voltage switchgear and

controlgear assemblies27. IEC 60092-301:1980/A1:1994 Amendment 1 - Electrical installations in ships. Part 301: Equipment -

Generators and motors28. IEC 60092-301:1980/A2:1995 Amendment 2 - Electrical installations in ships. Part 301: Equipment -

Generators and motors29. IEC 60092-202:1994 Electrical installations in ships - Part 202: System design - Protection30. IEC 60092-202:1994/A1:1996 Amnd. 1 - Electrical installations in ships - Part 202: System design - Protection31. IEC 60092-201:1994 Electrical installations in ships - Part 201: System design - General32. IEC 60092-101:1995 Electrical installations in ships - Part 101: Definitions and general requirements33. IEC 60076-10-1:2005 Power transformers - Part 10-1: Determ. of sound levels - Application guide34. IEC 60076-8:1997 Power transformers - Part 8: Application guide35. IEC 60072-3:1994 Dimensions and output series for rotating electrical machines - Part 3: Small

built-in motors - Flange numbers BF10 to BF5036. IEC 60076-7:2005 Power transformers - Part 7: Loading guide for oil-immersed power transform.37. IEC 60072-2:1990 Dimensions and output series for rotating electrical machines - Part 2: Frame

numbers 355 to 1000 and flange numbers 1180 to 236038. IEC 60072-1:1991 Dimensions and output series for rotating electrical machines - Part 1: Frame

numbers 56 to 400 and flange numbers 55 to 108039. IEC 60136:1986 Dimensions of brushes and brush-holders for electrical machinery40. IEC 60136:1986/A1: 1995 Dimensions of brushes and brush-holders for electrical machinery41. IEC 61892-3:2012 Mobile and fixed offshore units - Electrical installations - Part 3: Equipment42. IEC 60092-360:2014 Electrical installations in ships - Part 360: Insulating and sheathing materials for

shipboard and offshore units, power, control, instrumentation andtelecommunication cables

43. IEC/TR 60092-370:2009 Electrical installations in ships - Part 370: Guidance on the selection of cables fortelecommunication and data transfer including radio-frequency cables

44. IEC 60092-376:2003 Electrical installations in ships - Part 376: Cables for control andinstrumentation circuits 150/250 V (300 V)

45. IEC 61378-3:2015 Converter transformers - Part 3: Application guide

7

Technical Committee No. 6“Technical safety and environment” 95 standards


1. CEN/CLC/TR 14060:2014 Medical device traceability enabled by unique device identification (UDI)2. CEN/CLC/TR 16832:2015 Selection, use, care and maintenance of personal protective equipment for

preventing electrostatic risks in hazardous areas (explosion risks)3. EN 45544-1:2015 Workplace atmospheres - Electrical apparatus used for the direct detection and

direct concentration measurement of toxic gases and vapours - Part 1: Generalrequirements and test methods

4. CLC/TR 60079-32-1:2015 Explosive atmospheres - Part 32-1: Electrostatic Hazards - Guidance5. CLC/TR 60079-33:2015 Explosive atmospheres - Part 33: Equipment protection by special protection 's'6. CLC/TS 50594:2015 Tumble dryers for commercial use - Methods for measuring the performance7. CLC/TS 50625-3-1:2015 Collection, logistics & treatment requirements for WEEE - Part 3-1: Specification

for de-pollution - General8. CLC/TS 50640:2015 Clothes washing machines for commercial use - Methods for measuring the

performance9. EN 50270:2015 Electromagnetic compatibility - Electrical apparatus for the detection and

measurement of combustible gases, toxic gases or oxygen10. EN 50342-2:2007/A1:2014 Lead-acid starter batteries - Part 2: Dimensions of batteries & mark of terminals11. EN 50436-2:2014/A1:2015 Alcohol interlocks - Test methods and performance requirements - Part 2:

Instruments having a mouthpiece and measuring breath alcohol for generalpreventive use

12. EN 50436-6:2015 Alcohol interlocks - Test methods and performance requirements - Part 6: Datasecurity

13. EN 50465:2015 Gas appliances - Combined heat and power appliance of nominal heat inputinferior or equal to 70 kW

14. EN 50548:2011/A2:2014 Junction boxes for photovoltaic modules15. EN 50574-1:2012/AC:2014 Collection, logistics & treatment requirements for end-of-life household

appliances containing volatile fluorocarbons or volatile hydrocarbons16. EN 50598-1:2014 Ecodesign for power drive systems, motor starters, power electronics & their

driven applications - Part 1: General requirements for setting energy efficiencystandards for power driven equipment using the extended product approach(EPA), and semi analytic model (SAM)

17. EN 50598-2:2014 Ecodesign for power drive systems, motor starters, power electronics & theirdriven applications - Part 2: Energy efficiency indicators for power drivesystems and motor starters

18. EN 50598-3:2015 Ecodesign for power drive systems, motor starters, power electronics and theirdriven applications - Part 3: Quantitative eco design approach through life cycleassessment including product category rules and the content of environmentaldeclarations

19. EN 50615:2015 Household and similar electrical appliances - Safety - Particular requirementsfor devices for fire prevention and suppression for electric hobs (cooktops)

20. EN 50625-2-1:2014 Collection, logistics and treatment requirements for WEEE - Part 2-1: Treatmentrequirements for lamps

8

21. EN 50636-2-107:2015 Safety of household and similar appliances - Part 2-107: Particular requirementsfor robotic battery powered electrical lawnmowers

22. EN 60079-10-2:2015 Explosive atmospheres - Part 10-2: Classification of areas - Explosive dustatmospheres

23. EN 60079-18:2015 Explosive atmospheres - Part 18: Equipment protection by encapsulation "m"24. EN 60079-2:2014 Explosive atmospheres - Part 2: Equipm. protection pressurized enclosure "p"25. EN 60079-32-2:2015 Explosive atmospheres - Part 32-2: Electrostatics hazards - Tests26. EN 60079-5:2015 Explosive atmospheres - Part 5: Equipment protection by powder filling "q"27. EN 60079-26:2015 Explosive atmospheres - Part 26: Equipment with Equipment Protection Level

(EPL) Ga28. EN 60320-3:2014 Appliance couplers for household and similar general purposes - Part 3:

Standard sheets and gauges29. EN 60335-2-103:2015 Household and similar electrical appliances - Safety - Part 2-103: Particular

requirements for drives for gates, doors and windows30. EN 60335-2-11:2010/A1:2015 Household and similar electrical appliances - Safety - Part 2-11: Particular

requirements for tumble dryers31. EN 60335-2-15:2002/AC:2005 Household and similar electrical appliances - Safety - Part 2-15: Particular

requirements for appliances for heating liquids32. EN 60335-2-23:2003/A2:2015 Household and similar electrical appliances - Safety - Part 2-23: Particular

requirements for appliances for skin or hair care33. EN 60335-2-31:2014 Household and similar electrical appliances - Safety - Part 2-31: Particular

requirements for range hoods and other cooking fume extractors34. EN 60335-2-32:2003/A2:2015 Household and similar electrical appliances - Safety - Part 2-32: Particular

requirements for massage appliances35. EN 60335-2-4:2010/A1:2015 Household and similar electrical appliances - Safety - Part 2-4: Particular

requirements for spin extractors36. EN 60335-2-5:2015 Household and similar electrical appliances - Safety - Part 2-5: Particular

requirements for dishwashers37. EN 60335-2-

54:2008/A11:2012/AC:2015Household and similar electrical appliances - Safety - Part 2-54: Particularrequirements for surface-cleaning appliances for household use employingliquids or steam

38. EN 60335-2-6:2015 Household and similar electrical appliances - Safety - Part 2-6: Particularrequirements for stationary cooking ranges, hobs, ovens and similar appliances

39. EN 60335-2-76:2005/A2:2015 Household and similar electrical appliances - Safety - Part 2-76: Particularrequirements for electric fence energizers

40. EN 60335-2-95:2015 Household and similar electrical appliances - Safety - Part 2-95: Particularrequirements for drives for vertically moving garage doors for residential use

41. EN 60335-2-97:2006/A12:2015 Household and similar electrical appliances - Safety - Part 2-97: Particularrequirements for drives for rolling shutters, awnings, blinds and similarequipment

42. EN 60704-2-1:2015 Household and similar electrical appliances - Test code for the determination ofairborne acoustical noise - Part 2-1: Particular requirements for vacuumcleaners

43. EN 60704-2-14:2013/A11:2015 Household and similar electrical appliances - Test code for the determination ofairborne acoustical noise - Part 2-14: Particular requirements for refrigerators,frozen-food storage cabinets and food freezers

9

44. EN 60704-2-5:2005/A1:2015 Household and similar electrical appliances - Test code for the determination ofairborne acoustical noise - Part 2-5: Particular requirements for electric thermalstorage room heaters

45. EN 60705:2015 Household microwave ovens - Methods for measuring performance46. EN 60730-2-5:2015 Automatic electrical controls - Part 2-5: Particular requirements for automatic

electrical burner control systems47. EN 60745-2-3:2011/A12:2014 Hand-held motor-operated electric tools - Safety - Part 2-3: Particular

requirements for grinders, polishers and disk-type sanders48. EN 60839-11-1:2013/AC:2015 Alarm and electronic security systems - Part 11-1: Electronic access control

systems - System and components requirements49. EN 60839-11-2:2015 Alarm and electronic security systems - Part 11-2: Electronic access control

systems - Application guidelines50. EN 60904-2:2015 Photovoltaic devices - Part 2: Requirements for photovoltaic reference devices51. EN 61029-2-5:2011/A11:2015 Safety of transportable motor-operated electric tools - Part 2-5: Particular

requirements for band saws52. EN 61243-3:2014/AC:2015 Live working - Voltage detectors - Part 3: Two-pole low-voltage type53. EN 61481-1:2014 Live working - Phase comparators - Part 1: Capacitive type to be used for

voltages exceeding 1 kV a.c.54. EN 61481-2:2014 Live working - Phase comparators - Part 2: Resistive type to be used for

voltages from 1 kV to 36 kV a.c.55. EN 61482-1-2:2014 Live working - Protective clothing against the thermal hazards of an electric arc

- Part 1-2: Test methods - Method 2: Determination of arc protection class ofmaterial and clothing by using a constrained and directed arc (box test)

56. EN 61496-1:2013/AC:2015 Safety of machinery - Electro-sensitive protective equipment - Part 1: Generalrequirements and tests

57. EN 61591:1997/A12:2015 Household range hoods and other cooking fume extractors - Methods formeasuring performance

58. EN 62115:2005/A12:2015 Electric toys - Safety59. EN 62366-1:2015 Medical devices - Part 1: Application of usability engineering to med. devices60. EN 62368-1:2014/AC:2015 Audio/video, information and communication technology equipment - Part 1:

Safety requirements61. EN 62522:2014 Calibration of tuneable laser sources62. EN 62620:2015 Secondary cells and batteries containing alkaline or other non-acid electrolytes -

Secondary lithium cells and batteries for use in industrial applications63. EN 62656-1:2015 Standardized product ontology register and transfer by spreadsheets - Part 1:

Logical structure for data parcels64. EN 62676-1-2:2014/AC:2015 Video surveillance systems for use in security applications - Part 1-2: System

requirements – Performance requirements for video transmission65. EN 62676-3:2015 Video surveillance systems for use in security applications - Part 3: Analog and

digital video interfaces66. EN 62676-4:2015 Video surveillance systems for use in security applications - Part 4: Application

guidelines67. EN 62740:2015 Root cause analysis (RCA)68. EN 62741:2015 Demonstration of dependability requirements - The dependability case69. EN 62790:2015 Junction boxes for photovoltaic modules - Safety requirements and tests70. EN 62817:2015 Photovoltaic systems - Design qualification of solar trackers

10

71. EN 62841-2-9:2015 Electric motor-operated hand-held tools, transportable tools and lawn andgarden machinery - Safety - Part 2-9: Particular requirements for hand-heldtappers and threaders

72. EN 62852:2015 Connectors for DC-application in photovoltaic systems - Safety require. & tests73. EN 62885-3:2015 Surface cleaning appliances - Part 3: Wet carpet cleaning appliances - Methods

for measuring the performance74. EN 80601-2-35:2009/AC:2015 Medical electrical equipment - Part 2-35: Particular requirements for the basic

safety and essential performance of heating devices using blankets, pads andmattresses and intended for heating in medical use

75. EN ISO/IEC 80369-20:2015 Small-bore connectors for liquids and gases in healthcare applications - Part 20:Common test methods (ISO 80369-20:2015)

76. HD 60364-4-42:2011/A1:2015 Low voltage electrical installations - Part 4-42: Protection for safety - Protectionagainst thermal effects

77. HD 60364-8-1:2015 Low-voltage electrical installations - Part 8-1: Energy efficiency78. HD 62640:2015 Residual current devices with or without overcurrent protection for socket-outlets

for household and similar uses79. IEC 60050-351:2013 International Electrotechnical Vocabulary - Part 351: Control technology80. IEC 60050-426:2008 International Electrotechnical Vocabulary - Part 426: Equipment for explosive

atmospheres81. IEC 60050-426:2008/A1:2015 Amendment 1 - International Electrotechnical Vocabulary - Part 426: Equipment for

explosive atmospheres82. IEC 60050-482:2004 International Electrotechnical Vocabulary - Part 482: Primary and secondary cells

and batteries83. IEC 60050-114:2014 International Electrotechnical Vocabulary - Part 114: Electrochemistry84. IEC 60079-28:2015 Explosive atmospheres - Part 28: Protection of equipment and transmission

systems using optical radiation85. IEC 60079-29-2:2015 Explosive atmospheres - Part 29-2: Gas detectors - Selection, installation, use

and maintenance of detectors for flammable gases and oxygen86. IEC 60079-32-2:2015 Explosive atmospheres - Part 32-2: Electrostatics hazards - Tests87. IEC 60079-5:2015 Explosive atmospheres - Part 5: Equipment protection by powder filling "q"88. IEC 60079-6:2015 Explosive atmospheres - Part 6: Equipment protection by liquid immersion "o"89. IEC 60335-2-58:2002/A2:2015 Amendment 2 - Household and similar electrical appliances - Safety - Part 2-58:

Particular requirements for commercial electric dishwashing machines90. IEC 60335-2-65:2002/A2:2015 Amendment 2 - Household and similar electrical appliances - Safety - Part 2-65:

Particular requirements for air-cleaning appliances91. IEC 60335-2-80:2015 Household and similar electrical appliances - Safety - Part 2-80: Particular

requirements for fans92. IEC 60335-2-81:2015 Household and similar electrical appliances - Safety - Part 2-81: Particular

requirements for foot warmers and heating mats93. IEC/TS 60079-40:2015 Explosive atmospheres - Part 40: Requirements for process sealing between

flammable process fluids and electrical systems94. IEC/TS 61496-4-3:2015 Safety of machinery - Electro-sensitive protective equipment - Part 4-3:

Particular requirements for equipment using vision based protective devices(VBPD) - Additional requirements when using stereo vision techniques

95. IEC 62321-6:2015 Determination of certain substances in electrotechnical products - Part 6:Polybrominated biphenyls and polybrominated diphenyl ethers in polymers bygas chromatograhy -mass spectometry (GC-MS)

11

Technical Committee No. 7“Semiconductor materials and devices. Electromechanical

components and mechanical structures for electronic equipment”,73 standards


1. EN 140402:2015 Blank Detail Specification: Fixed low power wirewound surface mount (SMD)resistors

2. EN 140402-801:2015 Detail specification: Fixed low power wirewound surface mount (SMD)resistors - Rectangular - Stability classes 0,5; 1; 2

3. EN 50121-1:2015 Railway applications - Electromagnetic compatibility - Part 1: General4. EN 50121-2:2015 Railway applications - Electromagnetic compatibility - Part 2: Emission of the

whole railway system to the outside world5. EN 50121-3-1:2015 Railway applications - Electromagnetic compatibility - Part 3-1: Rolling stock -

Train and complete vehicle6. EN 50121-3-2:2015 Railway applic. - Electromagnetic comp. - Part 3-2: Rolling stock - Apparatus7. EN 50121-4:2015 Railway applications - Electromagnetic compatibility - Part 4: Emission and

immunity of the signalling and telecommunications apparatus8. EN 50121-5:2015 Railway applications - Electromagnetic compatibility - Part 5: Emission and

immunity of fixed power supply installations and apparatus9. EN 50123-6:2003/A1:2014 Railway applications - Fixed installations - D.C. switchgear - Part 6: D.C.

switchgear assemblies10. EN 50290-4-1:2014 Communication cables - Part 4-1: General considerations for the use of cables -

Environmental conditions and safety aspects11. EN 50290-4-2:2014 Communication cables - Part 4-2: General considerations for the use of cables -

Guide to use12. EN 50500:2008/A1:2015 Measurement procedures of magnetic field levels generated by electronic and

electrical apparat. in the railway environment with respect to human exposure13. EN 50617-1:2015 Railway applications - Technical parameters of train detection systems for the

interoperability of the trans-European railway system - Part 1: Track circuits14. EN 50617-2:2015 Railway Applications - Technical parameters of train detection systems for the

interoperability of the trans-European railway system - Part 2: Axle counters15. EN 60115-2:2015 Fixed resistors for use in electronic equipment - Part 2: Sectional specification:

Leaded fixed low power film resistors16. EN 50618:2014 Electric cables for photovoltaic systems17. EN 60118-4:2015 Electroacoustics - Hearing aids - Part 4: Induction-loop systems for hearing aid

purposes - System performance requirements18. EN 60318-3:2015 Electroacoustics - Simulators of human head and ear - Part 3: Acoustic coupler

for the calibration of supra-aural earphones used in audiometry19. EN 60297-3-108:2015 Mechanical structures for electronic equipment - Dimensions of mechanical

structures of the 482,6 mm (19 in) series - Part 3-108: Dimensions of R-typesubracks and plug-in units

20. EN 60645-1:2015 Electroacoustics - Audiometric equipment - Part 1: Equipment for pure-toneaudiometry

12

21. EN 60747-5-5:2011/A1:2015 Semiconductor devices - Discrete devices - Part 5-5: Optoelectronic devices -Photocouplers

22. EN 60940:2015 Guidance information on the application of capacitors, resistors, inductors andcomplete filter units for electromagnetic interference suppression

23. EN 61082-1:2015 Preparation of documents used in electrotechnology - Part 1: Rules24. EN 61375-2-5:2015 Electronic railway equipment - Train communication network (TCN) - Part 2-5:

Ethernet train backbone25. EN 61340-4-4:2012/A1:2015 Electrostatics - Part 4-4: Standard test methods for specific applications -

Electrostatic classification of flexible intermediate bulk containers (FIBC)26. EN 61340-4-8:2015 Electrostatics - Part 4-8: Standard test methods for specific applications -

Electrostatic discharge shielding - Bags27. EN 61810-1:2015 Electromechanical elementary relays - Part 1: General and safety requirements28. EN 61810-3:2015 Electromechanical elementary relays - Part 3: Relays with forcibly guided

(mechanically linked) contacts29. EN 61837-4:2015 Surface mounted piezoelectric devices for frequency control and selection -

Standard outlines and terminal lead connections - Part 4: Hybrid enclosureoutlines

30. EN 62135-2:2015 Resistance welding equipment - Part 2: Electromagnetic compatibility (EMC)requirements

31. EN 62489-1:2010/A1:2015 Electroacoustics - Audio-frequency induction loop systems for assisted hearing- Part 1: Methods of measuring and specifying the perform. of system compon.

32. EN 62656-3:2015 Standardized product ontology register and transfer by spreadsheets - Part 3:Interface for Common Information Model

33. EN 62744:2015 Representation of states of objects by graphical symbols34. EN 62813:2015 Lithium ion capacitors for use in electric and electronic equipment - Test

methods for electrical characteristics35. IEC 60063:2015 Preferred number series for resistors and capacitors36. IEC 60115-2:2014 Fixed resistors for use in electronic equipment - Part 2: Sectional specification:

Leaded fixed low power film resistors37. IEC 60384-19:2015 Fixed capacitors for use in electronic equipment - Part 19: Sectional

specification: Fixed metallized polyethylene-terephthalate film dielectricsurface mount d.c. capacitors

38. IEC 60384-9:2015 Fixed capacitors for use in electronic equipment - Part 9: Sectional specification:Fixed capacitors of ceramic dielectric, Class 2

39. IEC 60940:2015 Guidance information on the application of capacitors, resistors, inductors andcomplete filter units for electromagnetic interference suppression

40. IEC 62813:2015 Lithium ion capacitors for use in electric and electronic equipment - Testmethods for electrical characteristics

41. IEC 60050-101:1998 International Electrotechnical Vocabulary - Part 101: Mathematics42. IEC 60050-103:2009 International Electrotechnical Vocabulary - Part 103: Mathematics – Functions43. IEC 60050-113:2011 International Electrotechnical Vocabulary - Part 113: Physics for

electrotechnology44. IEC 60050-113:2011/AMD1:2014 Amendment 1 - International Electrotechnical Vocabulary - Part 113: Physics for

electrotechnology45. IEC 60050-121:1998 International Electrotechnical Vocabulary - Part 121: Electromagnetism46. IEC 60050-121:1998/A1:2002 Amendment 1 - Internat. Electrotech. Vocabulary - Part 121: Electromagnetism

13

47. IEC 60050-121:1998/A2:2008 Amendment 2 - International Electrotechnical Vocabulary - Part 121:Electromagnetism

48. IEC 60050-131:2002 International Electrotechnical Vocabulary - Part 131: Circuit theory49. IEC 60050-131:2002/A1:2008 Amendment 1 - International Electrotechnical Vocabulary - Part 131: Circuit

theory50. IEC 60050-131:2002/A2:2013 Amendment 2 - International Electrotechnical Vocabulary - Part 131: Circuit

theory51. IEC 60050-141:2004 International Electrotechnical Vocabulary - Part 141: Polyphase systems and

circuits52. IEC 60050-151:2001 International Electrotechnical Vocabulary - Part 151: Electrical and magnetic

devices53. IEC 60050-151:2001/A1:2013 Amendment 1 - International Electrotechnical Vocabulary - Part 151: Electrical

and magnetic devices54. IEC 60050-151:2001/A2:2014 Amendment 2 - International Electrotechnical Vocabulary - Part 151: Electrical

and magnetic devices55. IEC 60050-161:1990/A2:1998 Amendment 2 - International Electrotechnical Vocabulary. Chapter 161:

Electromagnetic compatibility56. IEC 60050-161:1990/A3:2014 Amendment 3 - International Electrotechnical Vocabulary - Part 161:

Electromagnetic compatibility57. IEC 60050-161:1990/A4:2014 Amendment 4 - International Electrotechnical Vocabulary - Part 161:

Electromagnetic compatibility58. IEC 60050-161:1990/A5:2015 Amendment 5 - International Electrotechnical Vocabulary - Chapter 161:

Electromagnetic compatibility59. IEC 60050-195:1998 International Electrotechnical Vocabulary - Part 195: Earthing and protection

against electric shock60. IEC 60050-195:1998/A1:2001 Amendment 1 - International Electrotechnical Vocabulary - Part 195: Earthing

and protection against electric shock61. IEC 60050-212:2010 International Electrotechnical Vocabulary - Part 212: Electrical insulating solids,

liquids and gases62. IEC 60050-212:2010/A1:2015 Amendment 1 - International Electrotechnical Vocabulary - Part 212: Electrical

insulating solids, liquids and gases63. IEC 60050-221:1990 International Electrotechnical Vocabulary. Chapter 221: Magnetic materials and

components64. IEC 60050-221:1990/A1:1993 Amendment 1 - International Electrotechnical Vocabulary. Chapter 221:

Magnetic materials and components65. IEC 60050-221:1990/A2:1999 Amendment 2 - International Electrotechnical Vocabulary. Chapter 221:

Magnetic materials and components66. IEC 60050-221:1990/A3:2007 Amendment 3 - International Electrotechnical Vocabulary - Part 221: Magnetic

materials and components67. IEC 60050-436:1990 International Electrotechnical Vocabulary. Chapter 436: Power capacitors68. IEC 60050-521:2002 International Electrotechnical Vocabulary - Part 521: Semiconductor devices

and integrated circuits69. IEC 60050-531:1974 International Electrotechnical Vocabulary. Electronic tubes70. IEC 60050-581:2008 International Electrotechnical Vocabulary - Part 581: Electromechanical

components for electronic equipment71. IEC 60050-811:1991 International Electrotechnical Vocabulary - Chapter 811: Electric traction

14

72. IEC 60050-821:1998 International Electrotechnical Vocabulary - Part 821: Signalling and securityapparatus for railways

73. IEC 60135:1961 Numbering of electrodes and designation of units in electronic tubes and valves

Technical Committee No. 8“Measuring equipment. Testing techniques”, 31 standards


1. CLC/TS 50568-4:2015 Electricity metering data exchange - Part 4: Lower layer PLC profile usingSMITP B-PSK modulation

2. CLC/TS 50568-8:2015 Electricity metering data exchange - The DLMS/COSEM suite - Part 8: SMITP B-PSK PLC communication profile for neighbourhood networks - Including: TheOriginal-SMITP PLC B-PSK communication profile, The Original-SMITP Localdata exchange profile and The Original-SMITP IP communication profile

3. CLC/TS 50590:2015 Electricity metering data exchange - Lower layer PLC profile using AdaptiveMulti Carrier Spread-Spectrum (AMC-SS) modulation

4. CLC/TS 52056-8-4:2015 Electricity metering data exchange - The DLMS/COSEM suite - Part 8-4:Narrow-band OFDM PRIME PLC communication profile for neighbourhoodnetworks

5. CLC/TS 52056-8-5:2015 Electricity metering data exchange - The DLMS/COSEM suite - Part 8-5:Narrow-band OFDM G3-PLC comm.. profile for neighbourhood networks

6. CLC/TS 52056-8-7:2015 Electricity metering data exchange - The DLMS/COSEM suite - Part 8-7: AMC-SS PLC communication profile for neighbourhood networks

7. EN 45501:2015 Metrological aspects of non-automatic weighing instruments8. EN 50561-1:2013/AC:2014 Power line communication apparatus used in low-voltage installations - Radio

disturbance characteristics - Limits and methods of measurement - Part 1:Apparatus for in-home use

9. EN 55014-2:2015 Electromagnetic compatibility - Requirements for household appliances,electric tools and similar apparatus - Part 2: Immunity - Prod. family standard

10. EN 60645-1:2015 Electroacoustics - Audiometric equipment - Part 1: Equipment for pure-toneaudiometry

11. EN 60721-2-1:2014 Classification of environmental conditions - Part 2-1: Environmental conditionsappearing in nature - Temperature and Humidity

12. EN 60721-2-3:2014 Classification of environmental conditions - Part 2-3: Environmental conditionsappearing in nature - Air pressure

13. EN 60721-2-9:2014 Classification of environmental conditions - Part 2-9: Environmental conditionsappearing in nature - Measured shock and vibration data - Storage,transportation and in-use

14. EN 61010-2-051:2015 Safety requirements for electrical equipment for measurement, control andlaboratory use - Part 2-051: Particular requirements for laboratory equipmentfor mixing and stirring

15. EN 61010-2-061:2015 Safety requirements for electrical equipment for measurement, control andlaboratory use - Part 2-061: Particular requirements for laboratory atomicspectrometers with thermal atomization and ionization

15

16. EN 61010-2-081:2015 Safety requirements for electrical equipment for measurement, control andlaboratory use - Part 2-081: Particular requirements for automatic and semi-automatic laboratory equipment for analysis and other purposes

17. EN 61158-1:2014 Industrial communication networks - Fieldbus specifications - Part 1: Overviewand guidance for the IEC 61158 and IEC 61784 series

18. EN 61158-2:2014 Industrial communication networks - Fieldbus specifications - Part 2: Physicallayer specification and service definition

19. EN 61158-3-1:2014 Industrial communication networks - Fieldbus specifications - Part 3-1: Data-link layer service definition - Type 1 elements

20. EN 61158-4-1:2014 Industrial communication networks - Fieldbus specifications - Part 4-1: Data-link layer protocol specification - Type 1 elements

21. EN 61158-5-2:2014 Industrial communication networks - Fieldbus specifications - Part 5-2:Application layer service definition - Type 2 elements

22. EN 61158-6-2:2014 Industrial communication networks - Fieldbus specifications - Part 6-2:Application layer protocol specification - Type 2 elements

23. EN 61207-7:2013 Expression of performance of gas analyzers - Part 7: Tuneable semiconductorlaser gas analyzers

24. EN 61557-8:2015 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500V d.c. - Equipment for testing, measuring or monitoring of protective measures- Part 8: Insulation monitoring devices for IT systems

25. EN 61557-9:2015 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500V d.c. - Equipment for testing, measuring or monitoring of protective measures- Part 9: Equipment for insulation fault location in IT systems

26. EN 61784-1:2014 Industrial communication networks - Profiles - Part 1: Fieldbus profiles27. EN 61784-2:2014 Industrial communication networks - Profiles - Part 2: Additional fieldbus

profiles for real-time networks based on ISO/IEC 8802-328. EN 61788-18:2013 Superconductivity - Part 18: Mechanical properties measurement - Room

temperature tensile test of Ag- and/or Ag alloy-sheathed Bi-2223 and Bi-2212composite superconductors

29. EN 61788-19:2014 Superconductivity - Part 19: Mechanical properties measurement - Roomtemperature tensile test of reacted Nb3Sn composite superconductors

30. EN 62053-24:2015 Electricity metering equipment (a.c.) - Particular requirements - Part 24: Staticmeters for reactive energy at fundamental frequency (classes 0,5 S, 1 S and 1)

31. EN 62734:2015 Industrial networks - Wireless communication network and communicationprofiles - ISA 100.11a

Technical Committee No. 9“Information and communication technology”, 30 standards


1. CLC/TR 50174-99-1:2015 Information technology - Cabling installation - Part 99-1: Remote powering2. EN 16601-10:2015 Space project management - Project planning and implementation3. EN 16601-10-01:2014 Space project management - Part 10-01: Organization and conduct of reviews4. EN 16601-40:2014 Space project management - Configuration and information management

16

5. EN 16601-60:2014 Space project management - Cost and schedule management6. EN 16601-80:2014 Space project management - Part 80: Risk management7. EN 16603-10-03:2014 Space engineering - Testing8. EN 16603-10-04:2015 Space engineering - Space environment9. EN 16603-10-06:2014 Space engineering - Part 10-06: Technical requirements specification10. EN 16603-10-09:2014 Space engineering - Reference coordinate system11. EN 16603-10-11:2014 Space engineering - Human factors engineering12. EN 16603-10-12:2014 Space engineering - Method for the calculation of radiation received and its

effects, and a policy for design margins13. EN 16603-20-06:2014 Space engineering - Spacecraft charging14. EN 16603-20-07:2014 Space engineering - Electromagnetic compatibility15. EN 16603-20-08:2014 Space engineering - Part 20-08: Photovoltaic assemblies and components16. EN 16603-32-01:2014 Space engineering - Fracture control17. EN 16603-32-02:2014 Space engineering - Structural design and verification of pressurized hardware18. EN 16603-32-03:2014 Space engineering - Structural finite element models19. EN 16603-32-10:2014 Space engineering - Structural factors of safety for spaceflight hardware20. EN 16603-32-11:2014 Space engineering - Modal survey assessment21. EN 16603-34:2014 Space engineering - Part 34: Environmental control and life support (ECLS)22. EN 16603-35:2014 Space engineering - Propulsion general requirements23. EN 16603-35-01:2014 Space engineering - Liquid and electric propulsion for spacecraft24. EN 50491-2:2010/A1:2015 General requirements for Home and Building Electronic Systems (HBES) and

Building Automation and Control Systems (BACS) - Part 2: Environmentalconditions

25. EN 50600-2-4:2015 Information technology - Data centre facilities and infrastructures - Part 2-4:Telecommunications cabling infrastructure

26. EN 55016-1-6:2015 Specification for radio disturbance and immunity measuring apparatus andmethods - Part 1-6: Radio disturbance and immunity measuring apparatus -EMC antenna calibration

27. EN 60065:2014 Audio, video and similar electronic apparatus - Safety requirements28. EN 61207-6:2015 Expression of performance of gas analyzers - Part 6:Photometric analyzers29. EN 61285:2015 Industrial-process control - Safety of analyzer houses30. EN 62351-3:2014 Power systems management and associated information exchange - Data and

communications security - Part 3: Communication network and system security- Profiles including TCP/IP

Technical Committee No. 10“Digital and analogue telecommunication systems”, 400 standards


1. EN 300 328 V1.9.1:2015 Electromagnetic compatibility and Radio spectrum Matters (ERM); Widebandtransmission systems; Data transmission equipment operating in the 2,4 GHzISM band and using wide band modulation techniques; Harmonized ENcovering the essential requirements of article 3.2 of the R&TTE Directive

17

2. EN 301 001-1 V1.2.2:1998 Integrated Services Digital Network (ISDN); Outgoing Call Barring (OCB)supplementary services; Digital Subscriber Signalling System No. one (DSS1)protocol; Part 1: Protocol specification

3. EN 301 001-2 V1.2.2:1998 Integrated Services Digital Network (ISDN); Outgoing Call Barring (OCB)supplementary services; Digital Subscriber Signalling System No. one (DSS1)protocol; Part 2: Protocol Implementation Conformance Statement (PICS)proforma specification

4. EN 301 001-3 V1.1.3:1998 Integrated Services Digital Network (ISDN); Outgoing Call Barring (OCB)supplementary services; Digital Subscriber Signalling System No. one (DSS1)protocol; Part 3: Test Suite Structure and Test Purposes (TSS&TP) specificationfor the user

5. EN 301 001-3 V2.0.0:1998 Integrated Services Digital Network (ISDN); Outgoing Call Barring (OCB)supplementary services; Digital Subscriber Signalling System No. one (DSS1)protocol; Part 3: Test Suite Structure and Test Purposes (TSS&TP) specificationfor the user

6. EN 301 001-4 V1.1.4:1999 Integrated Services Digital Network (ISDN); Outgoing Call Barring (OCB)supplementary services; Digital Subscriber Signalling System No. one (DSS1)protocol; Part 4: Abstract Test Suite (ATS) and partial Protocol ImplementationeXtra Information for Testing (PIXIT) proforma specification for the user

7. EN 301 001-4 V2.0.0:1999 Integrated Services Digital Network (ISDN); Outgoing Call Barring (OCB)supplementary services; Digital Subscriber Signalling System No. one (DSS1)protocol; Part 4: Abstract Test Suite (ATS) and partial Protocol ImplementationeXtra Information for Testing (PIXIT) proforma specification for the user

8. EN 301 001-5 V1.1.3:1998 Integrated Services Digital Network (ISDN); Outgoing Call Barring (OCB)supplementary services; Digital Subscriber Signalling System No. one (DSS1)protocol; Part 5: Test Suite Structure and Test Purposes (TSS&TP) specificationfor the network

9. EN 301 001-5 V2.0.0:1998 Integrated Services Digital Network (ISDN); Outgoing Call Barring (OCB)supplementary services; Digital Subscriber Signalling System No. one (DSS1)protocol; Part 5: Test Suite Structure and Test Purposes (TSS&TP) specificationfor the network

10. EN 301 001-6 V1.1.4:1999 Integrated Services Digital Network (ISDN); Outgoing Call Barring (OCB)supplementary services; Digital Subscriber Signalling System No. one (DSS1)protocol; Part 6: Abstract Test Suite (ATS) and partial Protocol ImplementationeXtra Information for Testing (PIXIT) proforma specification for the network

11. EN 301 001-6 V2.0.0:1999 Integrated Services Digital Network (ISDN); Outgoing Call Barring (OCB)supplementary services; Digital Subscriber Signalling System No. one (DSS1)protocol; Part 6: Abstract Test Suite (ATS) and partial Protocol ImplementationeXtra Information for Testing (PIXIT) proforma specification for the network

12. EN 301 002-1 V1.2.4:1998 Integrated Services Digital Network (ISDN); Security tools (SET) procedures;Dig. Subscriber Sign. Syst.No. one (DSS1) protocol; Part 1: Protocol specification

13. EN 301 002-1 V1.3.1:2001 Integrated Services Digital Network (ISDN); Security tools (SET) procedures;Digital Subscriber Signalling System No. one (DSS1) protocol; Part 1: Protocolspecification

14. EN 301 002-2 V1.2.4:1998 Integrated Services Digital Network (ISDN); Security tools (SET) procedures;Digital Subscriber Signalling System No. one (DSS1) protocol; Part 2: ProtocolImplementation Conformance Statement (PICS) proforma specification

18

15. EN 301 002-2 V1.3.1:2001 Integrated Services Digital Network (ISDN); Security tools (SET) procedures;Digital Subscriber Signalling System No. one (DSS1) protocol; Part 2: ProtocolImplementation Conformance Statement (PICS) proforma specification

16. EN 301 002-3 V1.1.4:2000 Integrated Services Digital Network (ISDN); Security tools (SET) procedures;Digital Subscriber Signalling System No. one (DSS1) protocol; Part 3: Test SuiteStructure and Test Purposes (TSS&TP) specification for the user



19. EN 301 002-4 V1.1.3:2000 Integrated Services Digital Network (ISDN); Security tools (SET) procedures;Digital Subscriber Signalling System No. one (DSS1) protocol; Part 4: AbstractTest Suite (ATS) and partial Protocol Implementation eXtra Information forTesting (PIXIT) proforma specification for the user

20. EN 301 002-4 V1.2.1:2001 Integrated Services Digital Network (ISDN); Security tools (SET) procedures;Digital Subscriber Signalling System No. one (DSS1) protocol; Part 4: AbstractTest Suite (ATS) and partial Protocol Implementation eXtra Information forTesting (PIXIT) proforma specification for the user

21. EN 301 002-5 V1.1.4:2000 Integrated Services Digital Network (ISDN); Security tools (SET) procedures;Digital Subscriber Signalling System No. one (DSS1) protocol; Part 5: Test SuiteStructure and Test Purposes (TSS&TP) specification for the network



24. EN 301 002-6 V1.1.3:2000 Integrated Services Digital Network (ISDN); Security tools (SET) procedures;Digital Subscriber Signalling System No. one (DSS1) protocol; Part 6: Abstract TestSuite (ATS) and partial Protocol Implementation eXtra Information for Testing(PIXIT) proforma specification for the network



27. EN 301 003-1 V1.1.3:1999 Broadband Integrated Services Digital Network (B-ISDN); Digital SubscriberSignalling System No. two (DSS2) protocol; Connection characteristics; Peak cellrate modification by the connection owner; Part 1: Protocol specification

28. EN 301 003-2 V1.1.3:1999 Broadband Integrated Services Digital Network (B-ISDN); Digital SubscriberSignalling System No. two (DSS2) protocol; Connection characteristics; Peak cellrate modification by the connection owner; Part 2: Protocol ImplementationConformance Statement (PICS) proforma specification

19

29. EN 301 003-3 V1.1.3:1999 Broadband Integrated Services Digital Network (B-ISDN); Digital SubscriberSignalling System No. two (DSS2) protocol; Connection characteristics; Peakcell rate modification by the connection owner; Part 3: Test Suite Structure andTest Purposes (TSS&TP) specification for the user

30. EN 301 003-3 V1.2.1:2000 Broadband Integrated Services Digital Network (B-ISDN); Digital SubscriberSignalling System No. two (DSS2) protocol; Connection characteristics; Peakcell rate modification by the connection owner; Part 3: Test Suite Structure andTest Purposes (TSS&TP) specification for the user

31. EN 301 003-4 V1.1.3:1999 Broadband Integrated Services Digital Network (B-ISDN); Digital SubscriberSignalling System No. two (DSS2) protocol; Connection characteristics; Peakcell rate modification by the connection owner; Part 4: Abstract Test Suite (ATS)and partial Protocol Implementation eXtra Information for Testing (PIXIT)proforma specification for the user

32. EN 301 003-4 V1.2.1:2000 Broadband Integrated Services Digital Network (B-ISDN); Digital SubscriberSignalling System No. two (DSS2) protocol; Connection characteristics; Peakcell rate modification by the connection owner; Part 4: Abstract Test Suite (ATS)and partial Protocol Implementation eXtra Information for Testing (PIXIT)proforma specification for the user

33. EN 301 003-5 V1.1.3:1999 Broadband Integrated Services Digital Network (B-ISDN); Digital SubscriberSignalling System No. two (DSS2) protocol; Connection characteristics; Peakcell rate modification by the connection owner; Part 5: Test Suite Structure andTest Purposes (TSS&TP) specification for the network

34. EN 301 003-5 V1.2.1:2000 Broadband Integrated Services Digital Network (B-ISDN); Digital SubscriberSignalling System No. two (DSS2) protocol; Connection characteristics; Peakcell rate modification by the connection owner; Part 5: Test Suite Structure andTest Purposes (TSS&TP) specification for the network

35. EN 301 003-6 V1.1.3:1999 Broadband Integrated Services Digital Network (B-ISDN); Digital SubscriberSignalling System No. two (DSS2) protocol; Connection characteristics; Peakcell rate modification by the connection owner; Part 6: Abstract Test Suite (ATS)and partial Protocol Implementation eXtra Information for Testing (PIXIT)proforma specification for the network

36. EN 301 003-6 V1.2.1:2000 Broadband Integrated Services Digital Network (B-ISDN); Digital SubscriberSignalling System No. two (DSS2) protocol; Connection characteristics; Peakcell rate modification by the connection owner; Part 6: Abstract Test Suite (ATS)and partial Protocol Implementation eXtra Information for Testing (PIXIT)proforma specification for the network

37. EN 301 004-1 V1.1.3:1998 Broadband Integrated Services Digital Network (B-ISDN); Signalling SystemNo.7; Message Transfer Part (MTP) level 3 functions and messages to supportinternational interconnection; Part 1: Protocol specification

38. EN 301 004-2 V1.1.2:2000 Broadband Integrated Services Digital Network (B-ISDN); Signalling SystemNo.7; Message Transfer Part (MTP) level 3 functions and messages to supportinternational interconnection; Part 2: Protocol Implementation ConformanceStatement (PICS) proforma specification

39. EN 301 005-1 V1.1.4:1998 V interfaces at the digital Service Node (SN); Interfaces at the VB5.1 referencepoint for the support of broadband or combined narrowband and broadbandAccess Networks (ANs); Part 1: Interface specification

40. EN 301 005-2 V1.1.5:1998 V interfaces at the digital Service Node (SN); Interfaces at the VB5.1 reference

20

point for the support of broadband or combined narrowband and broadbandAccess Networks (ANs); Part 2: Protocol Implementation ConformanceStatement (PICS) proforma specification

41. EN 301 005-3 V1.1.2:2000 V interfaces at the digital Service Node (SN); Interfaces at the VB5.1 referencepoint for the support of broadband or combined narrowband and broadbandAccess Networks (ANs); Part 3: Test Suite Structure and Test Purposes(TSS&TP) specification

42. EN 301 005-4 V1.1.2:2000 V interfaces at the digital Service Node (SN); Interfaces at the VB5.1 referencepoint for the support of broadband or combined narrowband and broadbandAccess Networks (ANs); Part 4: Abstract Test Suite (ATS) and partial ProtocolImplementation eXtra Information for Testing (PIXIT) proforma specification

43. EN 301 006-1 V1.2.2:1998 Q3 interface at the Local Exchange (LE) for line and circuit testing of analogueand Integrated Services Digital network (ISDN) subscriber lines; Part 1: Q3interface specification

44. EN 301 006-1 V1.2.3:1998 Q3 interface at the Local Exchange (LE) for line and circuit testing of analogueand Integrated Services Digital network (ISDN) subscriber lines; Part 1: Q3interface specification

45. EN 301 007-1 V1.1.3:1998 Integrated Services Digital Network (ISDN); Signalling System No.7;Operations, Mainten. & Administration Part (OMAP); Part 1: Protocol specifica.

46. EN 301 007-2 V1.2.3:2000 Integrated Services Digital Network (ISDN); Signalling System No.7;Operations, Maintenance and Administration Part (OMAP); Part 2: ProtocolImplementation Conformance Statement (PICS) proforma specification

47. EN 301 008 V1.1.2:1998 Integrated Services Digital Network (ISDN); Signalling System No.7; SignallingConnection Control Part (SCCP); Interoperability test specification

48. EN 301 011 V1.1.1:1998 Electromagnetic compatibility and Radio spectrum Matters (ERM);ElectroMagnetic Compatibility (EMC) standard for Narrow-Band Direct-Printing (NBDP) NAVTEX receivers operating in the maritime mobile service

49. EN 301 021 V1.1.1:1998 Transmission and Multiplexing (TM); Digital Radio Relay Systems (DRRS);Time Division Multiple Access (TDMA); Point-to-multipoint DRRS inFrequency Division Duplex (FDD) bands in the range 3 GHz to 11 GHz

50. EN 301 021 V1.2.1:2000 Fixed Radio Systems; Point-to-multipoint equipment; Time Division MultipleAccess (TDMA); Point-to-multipoint radio systems in the Frequency DivisionDuplex (FDD) bands in the range 3 GHz to 11 GHz

51. EN 301 021 V1.3.1:2000 Fixed Radio Systems; Point-to-multipoint equipment; Time Division MultipleAccess (TDMA); Point-to-Multipoint digital radio systems in frequency bandsin the range 3 GHz to 11 GHz

52. EN 301 021 V1.4.1:2001 Fixed Radio Systems; Point-to-multipoint equipment; Time Division MultipleAccess (TDMA); Point-to-multipoint digital radio systems in frequency bandsin the range 3 GHz to 11 GHz



55. EN 301 025 V1.1.1:1998 ElectroMagnetic Compatibility and Radio Spectrum Matters (ERM); Technical

21

characteristics and methods of measurement for VHF radiotelephoneequipment for general communications and associated equipment for Class DDigital Selective Calling (DSC)

56. EN 301 025-1 V1.1.2:2000 ElectroMagnetic Compatibility and Radio Spectrum Matters (ERM); VHFradiotelephone equipment for general communications and associatedequipment for Class D Digital Selective Calling (DSC); Part 1: Technicalcharacteristics and methods of measurement

57. EN 301 025-1 V1.2.1:2004 Electromagnetic compatibility and Radio spectrum Matters (ERM); VHFradiotelephone equipment for general communications and associatedequipment for Class D Digital Selective Calling (DSC); Part 1: Technicalcharacteristics and methods of measurement


59. EN 301 025-1 V1.4.1:2000 ElectroMagnetic Compatibility and Radio Spectrum Matters (ERM); VHFradiotelephone equipment for general communications and associatedequipment for Class D Digital Selective Calling (DSC); Part 1: Technicalcharacteristics and methods of measurement


61. EN 301 025-2 V1.1.1:2000 Electromagnetic compatibility and Radio spectrum Matters (ERM); VHFradiotelephone equipment for general communications and associatedequipment for Class D Digital Selective Calling (DSC); Part 2: Harmonized ENunder article 3.2 of the R&TTE Directive



64. EN 301 025-3 V1.1.1:2001 Electromagnetic compatibility and Radio spectrum Matters (ERM); VHFradiotelephone equipment for general communications and associatedequipment for Class D Digital Selective Calling (DSC); Part 3: Harmonized ENunder article 3.3 (e) of the R&TTE Directive



22

67. EN 301 029-1 V1.1.2:1998 Broadband Integrated Services Digital Network (B-ISDN); Signalling SystemNo.7; B-ISDN User Part (B-ISUP); Part 1: Overview of the B-ISDN networknode interface signalling capability set 2, step 1 [ITU-T RecommendationQ.2721.1 (1996)]

68. EN 301 029-10 V1.1.3:1998 Broadband Integrated Services Digital Network (B-ISDN); Signalling SystemNo.7; B-ISDN User Part (B-ISUP); Part 10: Support of frame relay [ITU-TRecommendation Q.2727 (1996)]

69. EN 301 029-2 V1.1.2:1998 Broadband Integrated Services Digital Network (B-ISDN); Signalling SystemNo.7; B-ISDN User Part (B-ISUP); Part 2: Network node interface specificationfor point-to-multipoint call/connection control [ITU-T RecommendationQ.2722.1 (1996)]

70. EN 301 029-3 V1.2.3:1998 Broadband Integrated Services Digital Network (B-ISDN); Signalling SystemNo.7; B-ISDN User Part (B-ISUP); Part 3: Support of additional trafficparameters for Statistical Bit Rate (SBR), Available Bit Rate (ABR), ATM BlockTransfer (ABT) and Quality of Service (QoS) [ITU-T Recommendations Q.2723.1(1996), Q.2723.2 (1997), Q.2723.3 (1997) and Q.2723.4 (1997)

71. EN 301 029-4 V1.2.1:1998 Broadband Integrated Services Digital Network (B-ISDN); Signalling SystemNo.7; B-ISDN User Part (B-ISUP); Part 4: Look-ahead without state change forthe network node interface [ITU-T Recommendation Q.2724.1 (1996)]

72. EN 301 029-5 V1.2.1:1998 Broadband Integrated Services Digital Network (B-ISDN); Signalling SystemNo.7; B-ISDN User Part (B-ISUP); Part 5: Support of negotiation duringconnection setup [ITU-T Recommendation Q.2725.1 (1996)]

73. EN 301 029-6 V1.1.2:1998 Broadband Integrated Services Digital Network (B-ISDN); Signalling SystemNo.7; B-ISDN User Part (B-ISUP); Part 6: Modification procedures [ITU-TRecommendation Q.2725.2 (1996)]

74. EN 301 029-7 V1.1.3:1998 Broadband Integrated Services Digital Network (B-ISDN); Signalling SystemNo.7; B-ISDN User Part (B-ISUP); Part 7: ATM end system address [ITU-TRecommendation Q.2726.1 (1996)]

75. EN 301 029-8 V1.1.1:1997 Broadband Integrated Services Digital Network (B-ISDN); Signalling SystemNo.7; B-ISDN User Part (B-ISUP); Part 8: Call priority [ITU-T RecommendationQ.2726.2 (1996)]

76. EN 301 029-9 V1.1.2:1998 Broadband Integrated Services Digital Network (B-ISDN); Signalling SystemNo.7; B-ISDN User Part (B-ISUP); Part 9: Network generated session identifier[ITU-T Recommendation Q.2726.3 (1996)]

77. EN 301 033 V1.1.1:1998 ElectroMagnetic Compatibility and Radio Spectrum Matters (ERM); Technicalcharacteristics and methods of measurement for shipborne watchkeepingreceivers for reception of Digital Selective Calling (DSC) in the maritime MF,MF/HF and VHF bands

78. EN 301 033 V1.2.1:2005 Electromagnetic compatibility and Radio spectrum Matters (ERM); Technicalcharacteristics and methods of measurement for shipborne watchkeepingreceivers for reception of Digital Selective Calling (DSC) in the maritime MF,MF/HF and VHF bands

79. EN 301 033 V1.3.1:2010 Electromagnetic compatibility and Radio spectrum Matters (ERM); Technicalcharacteristics and methods of measurement for shipborne watchkeepingreceivers for reception of Digital Selective Calling (DSC) in the maritime MF,MF/HF and VHF bands

80. EN 301 033-2 V1.1.1:1998 Electromagnetic compatibility and Radio spectrum Matters (ERM); Technical

23

characteristics and methods of measurement for shipborne watchkeepingreceivers for reception of Digital Selective Calling (DSC) in the maritime MF,MF/HF and VHF bands Harmonised EN under article 3.2 of the R&TTEDirective

81. EN 301 039 V1.1.1:1997 Private Integrated Services Network (PISN); Mapping functions for theemployment of 64 kbit/s circuit mode connections with 16 kbit/s sub-multiplexing

82. EN 301 039 V1.2.1:2002 Private Integrated Services Network (PISN); Mapping functions for theemployment of 64 kbit/s circuit mode connections with 16 kbit/s sub-multiplexing [ISO/IEC 17310 (2002) modified]

83. EN 301 040 V2.0.0:1999 Terrestrial Trunked Radio (TETRA); Security; Lawful Interception (LI) interface84. EN 301 040 V2.1.1:2006 Terrestrial Trunked Radio (TETRA); Security; Lawful Interception (LI) interface85. EN 301 047 V1.1.1:1997 Private Integrated Services Network (PISN); Specification, functional models

and information flows; Transit counter additional network feature [ISO/IEC15055(1997) modified]

86. EN 301 047 V1.2.1:1997 Private Integrated Services Network (PISN); Specification, functional modelsand information flows; Transit counter additional network feature [ISO/IEC15055(2002) modified]

87. EN 301 048 V1.1.1:1997 Private Integrated Services Network (PISN); Inter-exchange signalling protocol;Transit counter additional network feature [ISO/IEC 15056 (1997) modified]

88. EN 301 048 V1.2.1:1997 Private Integrated Services Network (PISN); Inter-exchange signalling protocol;Transit counter additional network feature [ISO/IEC 15056 (2002) modified]

89. EN 301 049 V1.1.1:1997 Private Integrated Services Network (PISN); Specification, functional modelsand information flows; Circuit-mode multi-rate bearer services [ISO/IEC 11584(1996) modified]

90. EN 301 055 V1.1.1:1998 Transmission and Multiplexing (TM); Digital Radio Relay Systems (DRRS);Direct Sequence Code Division Multiple Access (DS-CDMA); Point-to-multipoint DRRS in frequency bands in the range 1 GHz to 3 GHz

91. EN 301 055 V1.2.1:2000 Fixed Radio Systems; Point-to-multipoint equipment; Direct Sequence CodeDivision Multiple Access (DS-CDMA); Point-to-multipoint digital radio systemin frequency bands in the range 1 GHz to 3 GHz

92. EN 301 055 V1.3.1:2000 Fixed Radio Systems: Point to multipoint equipment; Direct Sequence CodeDivision Multiple Access (DS-CDMA); Point-to-multipoint digital radiosystems in frequency bands in the range 1 GHz to 3 GHz

93. EN 301 055 V1.4.1:2001 Fixed Radio Systems: Point-to-multipoint equipment; Direct Sequence CodeDivision Multiple Access (DS-CDMA); Point-to-multipoint digital radiosystems in frequency bands in the range 1 GHz to 3 GHz

94. EN 301 060-1 V1.2.2:1998 Integrated Services Digital Network (ISDN); Digital Subscriber SignallingSystem No. one (DSS1) protocol; Basic call control; Enhancement at the bservice entry point for Virtual Private Network (VPN) applications; Part 1:Protocol specification

95. EN 301 060-2 V1.1.3:1998 Integrated Services Digital Network (ISDN); Digital Subscriber SignallingSystem No. one (DSS1) protocol; Basic call control; Enhancement at the bservice entry point for Virtual Private Network (VPN) applications; Part 2:Protocol Implementation Conformance Statement (PICS) proforma specification

96. EN 301 060-3 V1.1.3:1998 Integrated Services Digital Network (ISDN); Digital Subscriber Signalling

24

System No. one (DSS1) protocol; Basic call control; Enhancement at the bservice entry point for Virtual Private Network (VPN) applications; Part 3: TestSuite Structure and Test Purposes (TSS&TP) specification for the user

97. EN 301 060-3 V1.2.1:1998 Integrated Services Digital Network (ISDN); Digital Subscriber SignallingSystem No. one (DSS1) protocol; Basic call control; Enhancement at the bservice entry point for Virtual Private Network (VPN) applications; Part 3: TestSuite Structure and Test Purposes (TSS&TP) specification for the user

98. EN 301 060-3 V2.0.0:1998 Integrated Services Digital Network (ISDN); Digital Subscriber SignallingSystem No. one (DSS1) protocol; Basic call control; Enhancement at the bservice entry point for Virtual Private Network (VPN) applications; Part 3: TestSuite Structure and Test Purposes (TSS&TP) specification for the user

99. EN 301 060-4 V1.1.4:1999 Integrated Services Digital Network (ISDN); Digital Subscriber Signalling SystemNo. one (DSS1) protocol; Basic call control; Enhancement at the b service entry pointfor Virtual Private Network (VPN) applications; Part 4: Abstract Test Suite (ATS)and partial Protocol Implementation eXtra Information for Testing (PIXIT)proforma specification for the user



102. EN 301 060-5 V0.0.0:1998 Integrated Services Digital Network (ISDN); Digital Subscriber SignallingSystem No. one (DSS1) protocol; Generic Functional Protocol for the support ofsupplementary services at the b service entry point for Virtual private network(VPN) applications. Part 5: Test Suite Structure and Test Purposes (TSS&TP)specification for the network

103. EN 301 060-5 V1.1.3:1998 Integrated Services Digital Network (ISDN); Digital Subscriber SignallingSystem No. one (DSS1) protocol; Basic call control; Enhancement at the bservice entry point for Virtual Private Network (VPN) applications; Part 5: TestSuite Structure and Test Purposes (TSS&TP) specification for the network

104. EN 301 060-5 V1.2.1:1998 Integrated Services Digital Network (ISDN); Digital Subscriber Signalling SystemNo. one (DSS1) protocol; Basic call control; Enhancement at the b service entry pointfor Virtual Private Network (VPN) applications; Part 5: Test Suite Structure andTest Purposes (TSS&TP) specification for the network

105. EN 301 060-5 V2.0.0:1998 Integrated Services Digital Network (ISDN); Digital Subscriber Signalling SystemNo. one (DSS1) protocol; Basic call control; Enhancement at the b service entry pointfor Virtual Private Network (VPN) applications; Part 5: Test Suite Structure andTest Purposes (TSS&TP) specification for the network

106. EN 301 060-6 V1.1.4:1999 Integrated Services Digital Network (ISDN); Digital Subscriber Signalling SystemNo. one (DSS1) protocol; Basic call control; Enhancement at the b service entry pointfor Virtual Private Network (VPN) applications; Part 6: Abstract Test Suite (ATS)and partial Protocol Implementation eXtra Information for Testing (PIXIT)proforma specification for the network

25

107. EN 301 060-6 V1.2.1:1998 Integrated Services Digital Network (ISDN); Digital Subscriber SignallingSystem No. one (DSS1) protocol; Basic call control; Enhancement at the bservice entry point for Virtual Private Network (VPN) applications; Part 6:Abstract Test Suite (ATS) and partial Protocol Implementation eXtraInformation for Testing (PIXIT) proforma specification for the network

108. EN 301 060-6 V2.0.0:1998 Integrated Services Digital Network (ISDN); Digital Subscriber SignallingSystem No. one (DSS1) protocol; Basic call control; Enhancement at the bservice entry point for Virtual Private Network (VPN) applications; Part 6:Abstract Test Suite (ATS) and partial Protocol Implementation eXtraInformation for Testing (PIXIT) proforma specification for the network

109. EN 301 061-1 V1.2.2:1998 Integrated Services Digital Network (ISDN); Digital Subscriber SignallingSystem No. one (DSS1) protocol; Generic functional protocol for the support ofsupplementary services at the b service entry point for Virtual Private Network(VPN) applications; Part 1: Protocol specification

110. EN 301 061-2 V1.1.3:1998 Integrated Services Digital Network (ISDN); Digital Subscriber SignallingSystem No. one (DSS1) protocol; Generic functional protocol for the support ofsupplementary services at the b service entry point for Virtual Private Network(VPN) applications; Part 2: Protocol Implementation Conformace Statement(PICS) proforma specification

111. EN 301 061-3 V1.1.3:1998 Integrated Services Digital Network (ISDN); Digital Subscriber SignallingSystem No. one (DSS1) protocol; Generic functional protocol for the support ofsupplementary services at the b service entry point for Virtual Private Network(VPN) applications; Part 3: Test Suite Structure and Test Purposes (TSS&TP)specification for the user



114. EN 301 061-4 V1.1.4:1999 Integrated Services Digital Network (ISDN); Digital Subscriber SignallingSystem No. one (DSS1) protocol; Generic functional protocol for the support ofsupplementary services at the b service entry point for Virtual Private Network(VPN) applications; Part 4: Abstract Test Suite (ATS) and partial ProtocolImplementation eXtra Information for Testing (PIXIT) proforma specificationfor the user

115. EN 301 061-4 V1.2.1:1999 Integrated Services Digital Network (ISDN); Digital Subscriber SignallingSystem No. one (DSS1) protocol; Generic functional protocol for the support ofsupplementary services at the b service entry point for Virtual Private Network(VPN) applications; Part 4: Abstract Test Suite (ATS) and partial ProtocolImplementation eXtra Information for Testing (PIXIT) proforma specificationfor the user

116. EN 301 061-4 V2.0.0:1999 Integrated Services Digital Network (ISDN); Digital Subscriber Signalling

26

System No. one (DSS1) protocol; Generic functional protocol for the support ofsupplementary services at the b service entry point for Virtual Private Network(VPN) applications; Part 4: Abstract Test Suite (ATS) and partial ProtocolImplementation eXtra Information for Testing (PIXIT) proforma specificationfor the user

117. EN 301 061-5 V1.1.3:1998 Integrated Services Digital Network (ISDN); Digital Subscriber SignallingSystem No. one (DSS1) protocol; Generic functional protocol for the support ofsupplementary services at the b service entry point for Virtual Private Network(VPN) applications; Part 5: Test Suite Structure and Test Purposes (TSS&TP)specification for the network



120. EN 301 061-6 V1.1.4:1999 Integrated Services Digital Network (ISDN); Digital Subscriber SignallingSystem No. one (DSS1) protocol; Generic functional protocol for the support ofsupplementary services at the b service entry point for Virtual Private Network(VPN) applications; Part 6: Abstract Test Suite (ATS) and partial ProtocolImplementation eXtra Information for Testing (PIXIT) proforma specificationfor the network



123. EN 301 062-1 V1.2.2:1998 Integrated Services Digital Network (ISDN); Signalling System No.7; Support ofVirtual Private Network (VPN) applications with Private network Q referencepoint Signalling System number 1 (PSS1) information flows; Part 1: Protocolspecification [ITU-T Recommendations Q.765.1 and Q.699.1, modified]

124. EN 301 062-1 V1.2.3:1999 Integrated Services Digital Network (ISDN); Signalling System No.7; Support ofVirtual Private Network (VPN) applications with Private network Q referencepoint Signalling System number 1 (PSS1) information flows; Part 1: Protocolspecification [ITU-T Recommendations Q.765.1 and Q.699.1, modified]

125. EN 301 062-2 V1.1.1:2000 Integrated Services Digital Network (ISDN); Signalling System No.7; Support of

27

Virtual Private Network (VPN) applications with Private network Q referencepoint Signalling System number 1 (PSS1) information flows; Part 2: ProtocolImplementation Conformance Statement (PICS) proforma specification

126. EN 301 062-3 V1.1.1:2000 Integrated Services Digital Network (ISDN); Signalling System No.7; Support ofVirtual Private Network (VPN) applications with Private network Q referencepoint Signalling System number 1 (PSS1) information flows; Part 3: Test SuiteStructure and Test Purposes (TSS&TP) specification

127. EN 301 062-4 V1.1.1:2000 Integrated Services Digital Network (ISDN); Signalling System No.7 (SS7);Support of Virtual Private Network (VPN) applications with Private network Qreference point Signalling System number 1 (PSS1) information flows; Part 4:Abstract Test Suite (ATS) and partial Protocol Implementation eXtraInformation for Testing (PIXIT) proforma specification

128. EN 301 064-1 V1.1.1:1998 Telecommunications Management Network (TMN); Information models andprotocols for the management and control of the Asynchronous Transfer Mode(ATM) switching network element; Part 1: Q3 interface specification

129. EN 301 064-1 V1.1.2:1999 Telecommunications Management Network (TMN); Information models andprotocols for the management and control of the Asynchronous Transfer Mode(ATM) switching network element; Part 1: Q3 interface specification

130. EN 301 065-1 V1.2.2:1998 Integrated Services Digital Network (ISDN); Completion of Calls on No Reply(CCNR) supplementary service; Digital Subscriber Signalling System No. one(DSS1) protocol; Part 1: Protocol specification

131. EN 301 065-2 V1.2.2:1998 Integrated Services Digital Network (ISDN); Completion of Calls on No Reply(CCNR) supplementary service; Digital Subscriber Signalling System No. one(DSS1) protocol; Part 2: Protocol Implementation Conformance Statement(PICS) proforma specification

132. EN 301 065-3 V1.1.3:1998 Integrated Services Digital Network (ISDN); Completion of Calls on No Reply(CCNR) supplementary service; Digital Subscriber Signalling System No. one(DSS1) protocol; Part 3: Test Suite Structure and Test Purposes (TSS&TP)specification for the user

133. EN 301 065-3 V2.0.0:1998 Integrated Services Digital Network (ISDN); Completion of Calls on No Reply(CCNR) supplementary service; Digital Subscriber Signalling System No. one(DSS1) protocol; Part 3: Test Suite Structure and Test Purposes (TSS&TP)specification for the user

134. EN 301 065-4 V1.1.3:2000 Integrated Services Digital Network (ISDN); Completion of Calls on No Reply(CCNR) supplementary service; Digital Subscriber Signalling System No. one(DSS1) protocol; Part 4: Abstract Test Suite (ATS) and partial ProtocolImplementation eXtra Information for Testing (PIXIT) proforma specificationfor the user

135. EN 301 065-4 V1.2.1:2002 Integrated Services Digital network (ISDN); Digital Subscriber Signalling SystemNo. one (DSS1) protocol; Completion of Calls on No Reply (CCNR) supplementaryservice; Part 4: Abstract Test Suite (ATS) and partial Protocol Implementation eXtraInformation for Testing (PIXIT) proforma specification for the user

136. EN 301 065-4 V2.0.0:1999 Integrated Services Digital Network (ISDN); Completion of Calls on No Reply(CCNR) supplementary service; Digital Subscriber Signalling System No. one(DSS1) protocol; Part 4: Abstract Test Suite (ATS) and partial ProtocolImplementation eXtra Information for Testing (PIXIT) proforma specification forthe user

28

137. EN 301 065-5 V1.1.3:1998 Integrated Services Digital Network (ISDN); Completion of Calls on No Reply(CCNR) supplementary service; Digital Subscriber Signalling System No. one(DSS1) protocol; Part 5: Test Suite Structure and Test Purposes (TSS&TP)specification for the network

138. EN 301 065-5 V1.2.1:2002 Integrated Services Digital network (ISDN); Digital Subscriber SignallingSystem No. one (DSS1) protocol; Completion of Calls on No Reply (CCNR)supplementary service; Part 5: Test Suite Structure and Test Purposes (TSS&TP)specification for the network

139. EN 301 065-5 V2.0.0:1998 Integrated Services Digital Network (ISDN); Completion of Calls on No Reply(CCNR) supplementary service; Digital Subscriber Signalling System No. one(DSS1) protocol; Part 5: Test Suite Structure and Test Purposes (TSS&TP)specification for the network

140. EN 301 065-6 V1.2.4:1999 Integrated Services Digital Network (ISDN); Completion of Calls on No Reply(CCNR) supplementary service; Digital Subscriber Signalling System No. one(DSS1) protocol; Part 6: Abstract Test Suite (ATS) and partial ProtocolImplementation eXtra Information for Testing (PIXIT) proforma specificationfor the network

141. EN 301 065-6 V1.3.1:2002 Integrated Services Digital Network (ISDN); Digital Subscriber SignallingSystem No. one (DSS1) protocol; Completion of Calls on No Reply (CCNR)supplementary service; Part 6: Abstract Test Suite (ATS) and partial ProtocolImplementation eXtra Information for Testing (PIXIT) proforma specificationfor the network

142. EN 301 065-6 V2.0.0:1999 Integrated Services Digital Network (ISDN); Completion of Calls on No Reply(CCNR) supplementary service; Digital Subscriber Signalling System No. one(DSS1) protocol; Part 6: Abstract Test Suite (ATS) and partial ProtocolImplementation eXtra Information for Testing (PIXIT) proforma specificationfor the network

143. EN 301 067-1 V1.1.3:1999 Broadband Integrated Services Digital Network (B-ISDN); Digital SubscriberSignalling System No. two (DSS2) protocol; Connection characteristics;Negotiation during call/connection establishment phase; Part 1: Protocolspecification [ITU-T Recommendation Q.2962 (1996), modified]

144. EN 301 067-2 V1.1.3:1999 Broadband Integrated Services Digital Network (B-ISDN); Digital SubscriberSignalling System No. two (DSS2) protocol; Connection characteristics; Negotiationduring call/connection establishment phase; Part 2: Protocol ImplementationConformance Statement (PICS) proforma specification

145. EN 301 067-3 V1.1.3:1999 Broadband Integrated Services Digital Network (B-ISDN); Digital SubscriberSignalling System No. two (DSS2) protocol; Connection characteristics; Negotiationduring call/connection establishment phase; Part 3: Test Suite Structure and TestPurposes (TSS&TP) specification for the user

146. EN 301 067-3 V1.2.1:2000 Broadband Integrated Services Digital Network (B-ISDN); Digital SubscriberSignalling System No. two (DSS2) protocol; Connection characteristics; Negotiationduring call/connection establishment phase; Part 3: Test Suite Structure and TestPurposes (TSS&TP) specification for the user

147. EN 301 067-4 V1.1.3:1999 Broadband Integrated Services Digital Network (B-ISDN); Digital SubscriberSignalling System No. two (DSS2) protocol; Connection characteristics; Negotiationduring call/connection establishment phase; Part 4: Abstract Test Suite (ATS) andpartial Protocol Implementations eXtra Information for Testing (PIXIT) proformaspecification for the user

29

148. EN 301 067-4 V2.1.1:2000 Broadband Integrated Services Digital Network (B-ISDN); Digital SubscriberSignalling System No. two (DSS2) protocol; Connection characteristics;Negotiation during call/connection establishment phase; Part 4: Abstract TestSuite (ATS) and partial Protocol Implementations eXtra Information for Testing(PIXIT) proforma specification for the user

149. EN 301 067-5 V1.1.3:1999 Broadband Integrated Services Digital Network (B-ISDN); Digital SubscriberSignalling System No. two (DSS2) protocol; Connection characteristics;Negotiation during call/connection establishment phase; Part 5: Test SuiteStructure and Test Purposes (TSS&TP) specification for the network

150. EN 301 067-5 V1.2.1:2000 Broadband Integrated Services Digital Network (B-ISDN); Digital SubscriberSignalling System No. two (DSS2) protocol; Connection characteristics;Negotiation during call/connection establishment phase; Part 5: Test SuiteStructure and Test Purposes (TSS&TP) specification for the network

151. EN 301 067-6 V1.1.3:1999 Broadband Integrated Services Digital Network (B-ISDN); Digital SubscriberSignalling System No. two (DSS2) protocol; Connection characteristics;Negotiation during call/connection establishment phase; Part 6: Abstract TestSuite (ATS) and partial Protocol Implementation eXtra Information for Testing(PIXIT) proforma specification for the network

152. EN 301 067-6 V2.1.1:2000 Broadband Integrated Services Digital Network (B-ISDN); Digital SubscriberSignalling System No. two (DSS2) protocol; Connection characteristics;Negotiation during call/connection establishment phase; Part 6: Abstract TestSuite (ATS) and partial Protocol Implementation eXtra Information for Testing(PIXIT) proforma specification for the network

153. EN 301 068-1 V1.2.4:1998 Broadband Integrated Services Digital Network (B-ISDN); Digital SubscriberSignalling System No. two (DSS2) protocol; Connection characteristics; ATMtransfer capability and traffic parameter indication; Part 1: Protocolspecification [ITU-T Recommendations Q.2961.1 (1995), Q.2961.2 (1997),Q.2961.3 (1997), Q.2961.4 (1997), modified]

154. EN 301 068-1 V1.3.1:2002 Broadband Integrated Services Digital Network (B-ISDN); Digital SubscriberSignalling System No. two (DSS2) protocol; Connection characteristics; ATMtransfer capability and traffic parameter indication; Part 1: Protocolspecification [ITU-T Recommendations Q.2961.1 (1995), Q.2961.2 (1997),Q.2961.3 (1997), Q.2961.4 (1997) and Q.2961.6 (1997), modified]

155. EN 301 068-2 V1.1.3:2000 Broadband Integrated Services Digital Network (B-ISDN); Digital SubscriberSignalling System No. two (DSS2) protocol; Connection characteristics; ATMtransfer capability and traffic parameter indication; Part 2: ProtocolImplementation Conformance Statement (PICS) proforma specification

156. EN 301 068-2 V1.2.1:2002 Broadband Integrated Services Digital Network (B-ISDN); Digital SubscriberSignalling System No. two (DSS2) protocol; Connection characteristics; ATMtransfer capability and traffic parameter indication; Part 2: ProtocolImplementation Conformance Statement (PICS) proforma specification

157. EN 301 068-3 V1.1.2:2000 Broadband Integrated Services Digital Network (B-ISDN); Digital SubscriberSignalling System No. two (DSS2) protocol; Connection characteristics; ATMtransfer capability and traffic parameter indication; Part 3: Test Suite Structureand Test Purposes (TSS&TP) specification for the user

158. EN 301 068-3 V1.2.1:2002 Broadband Integrated Services Digital Network (B-ISDN); Digital SubscriberSignalling System No. two (DSS2) protocol; Connection characteristics; ATM

30

transfer capability and traffic parameter indication; Part 3: Test Suite Structureand Test Purposes (TSS&TP) specification for the user

159. EN 301 068-4 V1.1.1:2000 Broadband Integrated Services Digital Network (B-ISDN); Digital SubscriberSignalling System No. two (DSS2) protocol; Connection characteristics; ATMtransfer capability and traffic parameter indication; Part 4: Abstract Test Suite(ATS) and partial Protocol Implementation eXtra Information for Testing(PIXIT) proforma specification for the user

160. EN 301 068-4 V1.2.1:2002 Broadband Integrated Services Digital Network (B-ISDN); Digital SubscriberSignalling System No. two (DSS2) protocol; Connection characteristics; ATMtransfer capability and traffic parameter indication; Part 4: Abstract Test Suite(ATS) and partial Protocol Implementation eXtra Information for Testing(PIXIT) proforma specification for the user

161. EN 301 068-5 V1.1.2:2000 Broadband Integrated Services Digital Network (B-ISDN); Digital SubscriberSignalling System No. two (DSS2) protocol; Connection characteristics; ATMtransfer capability and traffic parameter indication; Part 5: Test Suite Structureand Test Purposes (TSS&TP) specification for the network

162. EN 301 068-5 V1.2.1:2002 Broadband Integrated Services Digital Network (B-ISDN); Digital SubscriberSignalling System No. two (DSS2) protocol; Connection characteristics; ATMtransfer capability and traffic parameter indication; Part 5: Test Suite Structureand Test Purposes (TSS&TP) specification for the network

163. EN 301 068-6 V1.1.1:2000 Broadband Integrated Services Digital Network (B-ISDN); Digital SubscriberSignalling System No. two (DSS2) protocol; Connection characteristics; ATMtransfer capability and traffic parameter indication; Part 6: Abstract Test Suite (ATS)and partial Protocol Implementation eXtra Information for Testing (PIXIT)proforma specification for the network

164. EN 301 068-6 V1.2.1:2002 Broadband Integrated Services Digital Network (B-ISDN); Digital SubscriberSignalling System No. two (DSS2) protocol; Connection characteristics; ATMtransfer capability and traffic parameter indication; Part 6: Abstract Test Suite (ATS)and partial Protocol Implementation eXtra Information for Testing (PIXIT)proforma specification for the network

165. EN 301 069-1 V1.2.2:1998 Integrated Services Digital Network (ISDN); Signalling System No.7; ISDN UserPart (ISUP); Application transport mechanism; Part 1: Protocol specification [ITU-TRecommendation Q.765, modified]



168. EN 301 069-1 V1.3.1:2001 Integrated Services Digital Network (ISDN); Signalling System No.7 (SS7); ISDNUser Part (ISUP); Application transport mechanism; Part 1: Protocol specification[ITU-T Recommendation Q.765, modified]


170. EN 301 069-2 V1.1.3:2000 Integrated Services Digital Network (ISDN); Signalling System No.7; ISDN UserPart (ISUP); Application transport mechanism; Part 2: Protocol ImplementationConformance Statement (PICS) proforma specification

31

171. EN 301 069-3 V1.2.2:2000 Integrated Services Digital Network (ISDN); Signalling System No.7; ISDNUser Part (ISUP); Application transport mechanism; Part 3: Test Suite Structureand Test Purposes (TSS&TP) specification

172. EN 301 070-1 V1.2.2:1998 Integrated Services Digital Network (ISDN); Signalling System No.7; ISDNUser Part (ISUP) version 3 interactions with the Intelligent NetworkApplication Part (INAP); Part 1: Protocol specification [ITU-T RecommendationQ.1600 (1997), modified]

173. EN 301 070-2 V1.1.2:2000 Integrated Services Digital Network (ISDN); Signalling System No.7; ISDNUser Part (ISUP) version 3 interactions with the Intelligent NetworkApplication Part (INAP); Part 2: Protocol Implementation ConformanceStatement (PICS) proforma specification

174. EN 301 070-3 V1.1.2:2000 Integrated Services Digital Network (ISDN); Signalling System No.7; ISDNUser Part (ISUP) version 3 interactions with the Intelligent NetworkApplication Part (INAP); Part 3: Test Suite Structure and Test Purposes(TSS&TP) specification

175. EN 301 070-4 V1.1.2:2000 Integrated Services Digital Network (ISDN); Signalling System No.7 (SS7);ISDN User Part (ISUP) version 3 interactions with the Intelligent NetworkApplication Part (INAP); Part 4: Abstract Test Suite (ATS) and partial ProtocolImplementation eXtra Information for Testing (PIXIT) proforma specification

176. EN 301 080 V1.1.1:1999 Transmission and Multiplexing (TM); Digital Radio Relay Systems (DRRS);Frequency Division Multiple Access (FDMA); Point-to-multipoint DRRS in thebands allocated to the fixed service in the range from 3 GHz to 11 GHz

177. EN 301 080 V1.2.1:2000 Fixed Radio Systems; Point-to-multipoint equipment; Frequency DivisionMultiple Access (FDMA); Point-to-multipoint digital radio systems infrequency bands in the range 3 GHz to 11 GHz

178. EN 301 080 V1.3.1:2001 Fixed Radio Systems; Point-to-multipoint equipment; Frequency DivisionMultiple Access (FDMA); Point-to-multipoint digital radio systems infrequency bands in the range 3 GHz to 11 GHz

179. EN 301 080 V1.4.1:2000 Fixed Radio Systems; Point-to-multipoint equipment;180. EN 301 082 V1.1.1:1998 Integrated Services Digital Network (ISDN); Outgoing Call Barring-Fixed

(OCB-F) supplementary service; Service description181. EN 301 082 V2.1.1:2000 Integrated Services Digital Network (ISDN); Outgoing Call Barring-Fixed

(OCB-F) supplementary service; Service description182. EN 301 084 V1.1.1:1998 Integrated Services Digital Network (ISDN); Outgoing Call Barring-User

Controlled (OCB-UC) supplementary service; Service description183. EN 301 084 V2.1.1:2000 Integrated Services Digital Network (ISDN); Outgoing Call Barring-User

Controlled (OCB-UC) supplementary service; Service description184. EN 301 086 V7.0.2:1999 Digital cellular telecommunications system (Phase 2+) (GSM); Subscriber

Identity Module (SIM) conformance test specification (GSM 11.17 version 7.0.2Release 1998)

185. EN 301 087 V5.3.1:1998 Digital cellular telecommunications system (Phase 2 and Phase 2+) (GSM); BaseStation System (BSS) equipment specification; Radio aspects (GSM 11.21version 5.3.1)

186. EN 301 087 V5.4.1:1999 Digital cellular telecommunications system (Phase 2 and Phase 2+) (GSM); BaseStation System (BSS) equipment specification; Radio aspects (GSM 11.21version 5.4.1)

32

187. EN 301 087 V7.1.1:1999 Digital cellular telecommunications system (Phase 2 and Phase 2+) (GSM); BaseStation System (BSS) equipment specification; Radio aspects (GSM 11.21version 7.1.1 Release 1998)




191. EN 301 089 V1.1.1:1997 Electromagnetic compatibility and Radio spectrum Matters (ERM); MaritimeVery High Frequency (VHF) distress radio equipment operating onaeronautical frequencies; Harmonised EN under article 3.2 of the R&TTEDirective

192. EN 301 090 V1.1.1:1998 Electromagnetic compatibility and Radio spectrum Matters (ERM);ElectroMagnetic Compatibility (EMC) standard for maritime radiotelephonewatch receivers operating on 2 182 kHz

193. EN 301 091 V1.1.1:1998 ElectroMagnetic Compatibility and Radio Spectrum Matters (ERM); RoadTransport and Traffic Telematics (RTTT); Technical characteristics and testmethods for radar equipment operating in the 76 GHz to 77 GHz band

194. EN 301 091-1 V1.2.1:2001 Electromagnetic compatibility and Radio spectrum Matters (ERM); Short RangeDevices; Road Transport and Traffic Telematics (RTTT); Radar equipmentoperating in the 76 GHz to 77 GHz and 24 GHz range; Part 1: TechnicalRequirements and methods of measurement

195. EN 301 091-1 V1.2.1:2004 Electromagnetic compatibility and Radio spectrum Matters (ERM); Short RangeDevices; Road Transport and Traffic Telematics (RTTT); Radar equipment operatingin the 76 GHz to 77 GHz range; Part 1: Technical characteristics and test methodsfor radar equipment operating in the 76 GHz to 77 GHz range

196. EN 301 091-1 V1.3.3:2006 Electromagnetic compatibility and Radio spectrum Matters (ERM); Short RangeDevices; Road Transport and Traffic Telematics (RTTT); Radar equipment operatingin the 76 GHz to 77 GHz range; Part 1: Technical characteristics and test methodsfor radar equipment operating in the 76 GHz to 77 GHz range

197. EN 301 091-2 V1.1.1:2001 Electromagnetic compatibility and Radio spectrum Matters (ERM); Short RangeDevices; Road Transport and Traffic Telematics (RTTT); Radar equipment operatingin the 76 GHz to 77 GHz and 24 GHz range; Part 2: Harmonized EN coveringessential requirements of article 3.2 of the R&TTE Directive

198. EN 301 091-2 V1.2.1:2004 Electromagnetic compatibility and Radio spectrum Matters (ERM); Short RangeDevices; Road Transport and Traffic Telematics (RTTT); Radar equipment operatingin the 76 GHz to 77 GHz range; Part 2: Harmonised EN covering essentialrequirements of article 3.2 of the R&TTE Directive

199. EN 301 091-2 V1.2.2:2005 Electromagnetic compatibility and Radio spectrum Matters (ERM); Short RangeDevices; Road Transport and Traffic Telematics (RTTT); Radar equipment operatingin the 76 GHz to 77 GHz range; Part 2: Harmonised EN covering essentialrequirements of article 3.2 of the R&TTE Directive

200. EN 301 098 V1.1.1:1998 Telecommunications Management Network (TMN); Scheduling function; Supportobject classes

33

201. EN 301 099-1 V1.1.1:1997 Telecommunications Security; Trusted Third Parties (TTP); Specification forTTP services; Part 1: Key management and key escrow/recovery

202. EN 301 102 V1.1.1:1998 Private Integrated Services Network (PISN); Mapping functions for theemployement of a circuit mode basic service and the supplementary serviceuser-to-user signalling as a pair of on-demand inter-PINX connections

203. EN 301 104 V1.1.1:1998 Human Factors (HF); Human factors requirements for a European TelephonyNumbering Space (ETNS)

204. EN 301 113 V6.1.1:1998 Digital cellular telecommunications system (Phase 2+) (GSM); General PacketRadio Service (GPRS); Service description; Stage 1 (GSM 02.60 version 6.1.1)

205. EN 301 113 V6.2.1:1999 Digital cellular telecommunications system (Phase 2+) (GSM); General PacketRadio Service (GPRS); Service description; Stage 1 (GSM 02.60 version 6.2.1Release 1997)

206. EN 301 113 V6.3.1:2000 Digital cellular telecommunications system (Phase 2+) (GSM); General PacketRadio Service (GPRS); Service description; Stage 1 (GSM 02.60 version 6.3.1Release 1997)

207. EN 301 117 V1.1.1:1998 Broadband Integrated Services Digital Network (B-ISDN); ATM AdaptationLayer (AAL); Sublayers: Service Specific Co-ordination Function (SSCF) toprovide the Connection-Oriented Transport Service (COTS) [ITU-TRecommendation I.365.3 (1995)]

208. EN 301 124 V1.1.1:1998 Transmission and Multiplexing (TM); Digital Radio Relay Systems (DRRS);Direct Sequence Code Division Multiple Access (DS-CDMA) point-to-multipoint DRRS in frequency bands in the range 3 GHz to 11 GHz

209. EN 301 124 V1.2.1:2001 Fixed Radio Systems; Point-to-multipoint equipment; Direct Sequence CodeDivision Multiple Access (DS-CDMA) point-to-multipoint digital radio systemsin frequency bands in the range 3 GHz to 11 GHz

210. EN 301 126-1 V1.1.2:1999 Fixed Radio Systems; Conformance testing; Part 1: Point-to-point equipment -Definitions, general requirements and test procedures

211. EN 301 126-1 V1.2.1:1999 Fixed Radio Systems; Conformance testing; Part 1: Point-to-point equipment -Definitions, general requirements and test procedures

212. EN 301 126-2-1 V1.1.1:2000 Fixed Radio Systems; Conformance testing; Part 2-1: Point-to-Multipointequipment; Definitions and general requirements

213. EN 301 126-2-2 V1.1.1:2000 Fixed Radio Systems; Conformance testing; Part 2-2: Point-to-Multipointequipment; Test procedures for FDMA systems

214. EN 301 126-2-3 V1.1.1:2000 Fixed Radio Systems; Conformance testing; Part 2-3: Point-to-Multipointequipment; Test procedures for TDMA systems

215. EN 301 126-2-3 V1.2.1:2004 Fixed Radio Systems; Conformance testing; Part 2-3: Point-to-Multipointequipment; Test procedures for TDMA systems

216. EN 301 126-2-4 V1.1.1:2000 Fixed Radio Systems; Conformance testing; Part 2-4: Point-to-Multipointequipment; Test procedures for FH-CDMA systems

217. EN 301 126-2-5 V1.1.1:2000 Fixed Radio Systems; Conformance testing; Part 2-5: Point-to-Multipointequipment; Test procedures for DS-CDMA systems

218. EN 301 126-2-6 V1.1.1:2002 Fixed Radio Systems; Conformance testing; Part 2-6: Point-to-Multipointequipment; Test procedures for Multi Carrier Time Division Multiple Access(MC-TDMA) systems

219. EN 301 126-3-1 V1.1.1:2000 Fixed Radio Systems; Conformance testing; Part 3-1: Point-to-Point antennas;Definitions, general requirements and test procedures

34

220. EN 301 126-3-1 V1.1.2:2002 Fixed Radio Systems; Conformance testing; Part 3-1: Point-to-Point antennas;Definitions, general requirements and test procedures

221. EN 301 126-3-2 V1.1.1:2001 Fixed Radio Systems; Conformance testing; Part 3-2: Point-to-Multipointantennas - Definitions, general requirements and test procedures

222. EN 301 126-3-2 V1.2.1:2003 Fixed Radio Systems; Conformance testing; Part 3-2: Point-to-Multipointantennas - Definitions, general requirements and test procedures

223. EN 301 127 V1.1.1:2000 Fixed Radio Systems; Point-to-point equipment; High capacity digital radiosystems carrying SDH signals (2 x STM-1) in frequency bands with about 30MHz channel spacing and using Co-Channel Dual Polarized (CCDP) operation

224. EN 301 127 V1.2.1:1999 Fixed Radio Systems; Point-to-point equipment; High capacity digital radiosystems carrying SDH signals (2 x STM-1) in frequency bands with about 30MHz channel spacing and using Co-Channel Dual Polarized (CCDP) operation

225. EN 301 127 V1.2.1:2001 Fixed Radio Systems; Point-to-point equipment; High capacity digital radiosystems carrying SDH signals (up to 2 x STM-1) in frequency bands with about30 MHz channel spacing and using Co-polar arrangements or Co-Channel DualPolarized (CCDP) operation

226. EN 301 127 V1.3.1:2002 Fixed Radio Systems; Point-to-point equipment; High capacity digital radiosystems carrying SDH signals (up to 2 x STM-1) in frequency bands with about30 MHz channel spacing and using co-polar arrangements or Co-Channel DualPolarized (CCDP) operation

227. EN 301 128 V1.1.1:1999 Transmission and Multiplexing (TM); Digital Radio Relay Systems (DRRS);Plesiochronous Digital Hierarchy (PDH); Low and medium capacity DRRSoperating in the 13 GHz, 15 GHz and 18 GHz frequency bands

228. EN 301 128 V1.1.2:2000 Fixed Radio Systems; Point-to-point equipment; Plesiochronous DigitalHierarchy (PDH); Low and medium capacity digital radio systems operating inthe 13 GHz, 15 GHz and 18 GHz frequency bands

229. EN 301 128 V1.2.1:2001 Fixed Radio Systems; Point-to-point equipment; Plesiochronous DigitalHierarchy (PDH); Low and medium capacity digital radio systems operating inthe 13 GHz, 15 GHz and 18 GHz frequency bands

230. EN 301 129 V1.1.1:1998 Transmission and Multiplexing (TM); Digital Radio Relay Systems (DRRS);Synchronous Digital Hierarchy (SDH); System performance monitoringparameters of SDH DRRS

231. EN 301 129 V1.1.2:1999 Transmission and Multiplexing (TM); Digital Radio Relay Systems (DRRS);Synchronous Digital Hierarchy (SDH); System performance monitoringparameters of SDH DRRS

232. EN 301 131 V1.1.1:1999 Integrated Services Digital Network (ISDN); Teleaction teleservice; Servicedescription

233. EN 301 132 V1.1.1:1998 Integrated Services Digital Network (ISDN); Security tools (SET) for use withintelecommunication services

234. EN 301 133 V1.1.1:1998 Integrated Services Digital Network (ISDN); Selective Call Forwarding (SCF)supplementary services (unconditional, busy and no reply); Service description

235. EN 301 134 V1.1.1:1998 Integrated Services Digital Network (ISDN); Completion of Calls on No Reply(CCNR) supplementary service; Service description

236. EN 301 137 V1.1.1:1998 Integrated Services Digital Network (ISDN); Signalling System No.7;Transaction Capabilities (TC); Application Service Element (ASE) for UserSignalling Bearer Service (USBS)

35

237. EN 301 138 V1.1.1:1998 Cordless Terminal Mobility (CTM); Application of an information model toCore INAP CS-2; CTM Phase 1 specification

238. EN 301 140-1 V1.3.4:1999 Intelligent Network (IN); Intelligent Network Application Protocol (INAP);Capability Set 2 (CS2); Part 1: Protocol specification

239. EN 301 140-2 V0.0.0:1999 Intelligent Network (IN); Intelligent Network Capability Set 2 (CS2); (PICS)Proforma Specification for the SCP, SCF-SSF, SCF-SRF and SCF-CUSF.

240. EN 301 140-2 V1.3.3:1999 Intelligent Network (IN); Intelligent Network Application Protocol (INAP);Capability Set 2 (CS2); Part 2: Protocol Implementation Conformance Statement(PICS) proforma specification

241. EN 301 140-2 V1.4.1:2002 Intelligent Network (IN); Intelligent Network Application Protocol (INAP);Capability Set 2 (CS2); Part 2: Protocol Implementation Conformance Statement(PICS) proforma specification

242. EN 301 140-3-1 V1.1.3:2000 Intelligent Network (IN); Intelligent Network Application Protocol (INAP);Capability Set 2 (CS2); Part 3: Test Suite Structure and Test Purposes (TSS&TP)specification for Service Switching Function (SSF); Sub-part 1: Basic capabilityset of CS-1 including CS-2 complements

243. EN 301 140-3-2 V1.1.3:2000 Intelligent Network (IN); Intelligent Network Application Protocol (INAP);Capability Set 2 (CS2); Part 3: Test Suite Structure and Test Purposes (TSS&TP)specification for Service Switching Function (SSF); Sub-part 2: Call PartyHandling (CPH)

244. EN 301 140-3-3 V1.1.3:2000 Intelligent Network (IN); Intelligent Network Application Protocol (INAP);Capability Set 2 (CS2); Part 3: Test Suite Structure and Test Purposes (TSS&TP)specification for Service Switching Function (SSF); Sub-part 3: SpecializedResource Functions (SRF)

245. EN 301 140-4-1 V1.1.3:2000 Intelligent Network (IN); Intelligent Network Application Protocol (INAP);Capability Set 2 (CS2); Part 4: Abstract Test Suite (ATS) specification and PartialProtocol Implementation eXtra Information for Testing (PIXIT) proforma forService Switching Function (SSF); Sub-part 1: Basic capability set of CS-1including CS-2 complements

246. EN 301 140-4-2 V1.1.3:2000 Intelligent Network (IN); Intelligent Network Application Protocol (INAP);Capability Set 2 (CS2); Part 4: Abstract Test Suite (ATS) specification and PartialProtocol Implementation eXtra Information for Testing (PIXIT) proforma forService Switching Function (SSF); Sub-part 2: Call Party Handling (CPH)

247. EN 301 140-4-3 V1.1.3:2000 Intelligent Network (IN); Intelligent Network Application Protocol (INAP);Capability Set 2 (CS2); Part 4: Abstract Test Suite (ATS) specification and PartialProtocol Implementation eXtra Information for Testing (PIXIT) proforma forService Switching Function (SSF); Sub-part 3: Specialized Resource Functions

248. EN 301 140-5 V1.1.3:1999 Intelligent Network (IN); Intelligent Network Application Protocol (INAP);Capability Set 2 (CS2); Part 5: Distributed Functional Plane (DFP) [ITU-TRecommendation Q.1224 (1997), modified]

249. EN 301 141-1 V1.2.2:1998 Integrated Services Digital Network (ISDN); Narrowband Multi-serviceDelivery System (NMDS); Part 1: NMDS interface specification

250. EN 301 141-1 V2.1.1:2000 Integrated Services Digital Network (ISDN); Narrowband Multi-serviceDelivery System (NMDS); Part 1: NMDS interface specification

251. EN 301 141-2 V1.2.2:1998 Integrated Services Digital Network (ISDN); Narrowband Multi-serviceDelivery System (NMDS); Part 2: Protocol Implementation ConformanceStatement (PICS) proforma specification

36

252. EN 301 141-2 V1.3.1:2001 Integrated Services Digital Network (ISDN); Narrowband Multi-serviceDelivery System (NMDS); Part 2: Protocol Implementation ConformanceStatement (PICS) proforma specification

253. EN 301 141-3 V1.1.1:2002 Integrated Services Digital Network (ISDN); Narrowband Multi-serviceDelivery System (NMDS); Part 3: Test Suite Structure and Test Purposes(TSS&TP) specification for the data link layer (NTN side)

254. EN 301 141-3 V1.2.1:1998 Integrated Services Digital Network (ISDN); Narrowband Multi-serviceDelivery System (NMDS); Part 3: Test Suite Structure and Test Purposes(TSS&TP) specification for the user

255. EN 301 141-4 V1.1.1:2002 Integrated Services Digital Network (ISDN); Narrowband Multi-serviceDelivery System (NMDS); Part 4: Test Suite Structure and Test Purposes(TSS&TP) specification for the network layer (NTN side)

256. EN 301 141-4 V1.2.1:1998 Integrated Services Digital Network (ISDN); Narrowband Multi-serviceDelivery System (NMDS); Part 4: Abstract Test Suite (ATS) and partial ProtocolImplementation eXtra Information for Testing (PIXIT) proforma specificationfor the user

257. EN 301 141-5 V1.1.1:2002 Integrated Services Digital Network (ISDN); Narrowband Multi-serviceDelivery System (NMDS); Part 5: Test Suite Structure and Test Purposes(TSS&TP) specification for the network layer (LE side)

258. EN 301 141-6 V1.1.1:2002 Integrated Services Digital Network (ISDN); Narrowband Multi-serviceDelivery System (NMDS); Part 6: Abstract Test Suite (ATS) and partial ProtocolImplementation eXtra Information for Testing (PIXIT) specification for theNMDS Layer 2 PSTN-GW function (NTN side)

259. EN 301 141-7 V1.1.1:2002 Integrated Services Digital Network (ISDN); Narrowband Multi-serviceDelivery System (NMDS); Part 7: Abstract Test Suite (ATS) and partial ProtocolImplementation eXtra Information for Testing (PIXIT) specification for thePSTN NMDS interface Layer 3 (NTN side)

260. EN 301 141-8 V1.1.1:2002 Integrated Services Digital Network (ISDN); Narrowband Multi-serviceDelivery System (NMDS); Part 8: Abstract Test Suite (ATS) and partial ProtocolImplementation eXtra Information for Testing (PIXIT) specification for thePSTN NMDS interface Layer 3 (LE side)

261. EN 301 142-1 V1.1.3:1998 Integrated Services Digital Network (ISDN); User Signalling Bearer Service(USBS); Digital Subscriber Signalling System No. one (DSS1) protocol; Part 1:Protocol specification

262. EN 301 142-2 V1.1.3:1998 Integrated Services Digital Network (ISDN); User Signalling Bearer Service(USBS); Digital Subscriber Signalling System No. one (DSS1) protocol; Part 2:Protocol Implementation Conformance Statement (PICS) proforma specification

263. EN 301 142-3 V1.1.1:1999 Integrated Services Digital Network (ISDN); User Signalling Bearer Service(USBS); Digital Subscriber Signalling System No. one (DSS1) protocol; Part 3:Test Suite Structure and Test Purposes (TSS&TP) specification for the user

264. EN 301 142-5 V1.1.2:1999 Integrated Services Digital Network (ISDN); User Signalling Bearer Service(USBS); Digital Subscriber Signalling System No. one (DSS1) protocol; Part 5:Test Suite Structure and Test Purposes (TSS&TP) specification for the network

265. EN 301 143 V1.1.4:1999 Intelligent Network (IN); Intelligent Network Application Protocol (INAP);Capability Set 2 (CS2); Cordless Terminal Mobility (CTM); Stage 3specifications for Service Control Function (SCF); SCF and Call UnrelatedService Function (CUSF)/Service Switching Function (SSF); SCF interface

37

266. EN 301 144-1 V1.1.2:2000 Integrated Services Digital Network (ISDN); Digital Subscriber SignallingSystem No. one (DSS1) and Signalling System No.7 (SS7) protocols; Signallingapplication for the mobility management service on the alpha interface; Part 1:Protocol specification

267. EN 301 144-2 V1.1.1:2000 Integrated Services Digital Network (ISDN); Digital Subscriber SignallingSystem No. one (DSS1) and Signalling System No.7 (SS7) protocols; Signallingapplication for the mobility management service on the alpha interface; Part 2:Protocol Implementation Conformance Statement (PICS) proforma specification

268. EN 301 144-3 V1.1.3:2000 Integrated Services Digital Network (ISDN); Digital Subscriber SignallingSystem No. one (DSS1) and Signalling System No.7 protocols; Signallingapplication for the mobility management service on the alpha interface; Part 3:Test Suite Structure and Test Purposes (TSS&TP) specification for the user

269. EN 301 144-4 V1.1.4:2000 Integrated Services Digital Network (ISDN); Digital Subscriber SignallingSystem No. one (DSS1) and Signalling System No.7 protocols; Signallingapplication for the mobility management service on the alpha interface; Part 4:Abstract Test Suite (ATS) and partial Protocol Implementation eXtraInformation for Testing (PIXIT) proforma specification for the user

270. EN 301 144-5 V1.1.5:2000 Integrated Services Digital Network (ISDN); Digital Subscriber SignallingSystem No. one (DSS1) and Signalling System No.7 (SS7) protocols; Signallingapplication for the mobility management service on the alpha interface; Part 5:Test Suite Structure and Test Purposes (TSS&TP) specification for the network

271. EN 301 144-6 V1.1.1:2000 Integrated Services Digital Network (ISDN); Digital Subscriber SignallingSystem No. one (DSS1) and Signalling System No.7 (SS7) protocols; Signallingapplication for the mobility management service on the alpha interface; Part 6:Abstract Test Suite (ATS) and partial Protocol Implementation eXtraInformation for Testing (PIXIT) proforma specification for the network

272. EN 301 145-1 V1.1.4:1999 Integrated Services Digital Network (ISDN); Digital Subscriber Signalling Syst.No. one (DSS1) protocol; Teleaction service; Part 1: Protocol specification

273. EN 301 145-2 V1.1.4:1999 Integrated Services Digital Network (ISDN); Digital Subscriber SignallingSystem No. one (DSS1) protocol; Teleaction service; Part 2: ProtocolImplementation Conformance Statement (PICS) proforma specification



276. EN 301 145-3 V1.1.6:1999 Integrated Services Digital Network (ISDN); Digital Subscriber SignallingSystem No. one (DSS1) protocol; Teleaction service; Part 3: Test Suite Structureand Test Purposes (TSS&TP) specification for the End User Terminal (EUT)

277. EN 301 145-5 V1.1.6:1999 Integrated Services Digital Network (ISDN); Digital Subscriber SignallingSystem No. one (DSS1) protocol; Teleaction service; Part 5: Test Suite Structureand Test Purposes (TSS&TP) specification for the Service Provider Terminal

278. EN 301 145-7 V1.1.6:1999 Integrated Services Digital Network (ISDN); Digital Subscriber SignallingSystem No. one (DSS1) protocol;Teleaction service; Part 7: Test Suite Structureand Test Purposes (TSS&TP) specification for the Teleaction ManagementFunction (TMF)

38

279. EN 301 152-1 V1.2.2:1998 Intelligent Network (IN); Intelligent Network Capability Set 1 (CS1) extension;Intelligent Network Application Protocol (INAP); Customised Applications forMobile network Enhanced Logic (CAMEL); Part 1: Protocol specification

280. EN 301 152-2 V1.2.2:1998 Intelligent Network (IN); Intelligent Network Capability Set 1 (CS1) extension;Intelligent Network Application Protocol (INAP); Customised Applications forMobile network Enhanced Logic (CAMEL); Part 2: Protocol ImplementationConformance Statement (PICS) proforma specification

281. EN 301 155 V1.1.1:1998 Synchronous Digital Hierarchy (SDH); Unidirectional performance monitoringfor the network element view

282. EN 301 246 V4.0.1:1997 Digital cellular telecommunications system (Phase 2) (GSM); Substitution andmuting of lost frames for Enhanced Full Rate (EFR) speech traffic channels(GSM 06.61 version 4.0.1)

283. EN 301 247 V4.0.1:1997 Digital cellular telecommunications system (Phase 2) (GSM); Comfort noiseaspects for Enhanced Full Rate (EFR) speech traffic channels (GSM 06.62version 4.0.1)

284. EN 301 254 V1.1.1:1998 Private Integrated Services Network (PISN); Specification, functional modelsand information flows; Advice of Charge (AoC) supplementary services[ISO/IEC 15049 (1997), modified]

285. EN 301 255 V1.2.1:2004 Private Integrated Services Network (PISN); Inter-exchange signalling protocol;Message waiting indication supplementary service [ISO/IEC 15506 (2003),modified]

286. EN 301 256 V1.1.1:1998 Private Integrated Services Network (PISN); Specification, functional modelsand information flows; Call interception Additional Network Feature (ANF)[ISO/IEC 15053 (1997), modified]

287. EN 301 258 V1.1.1:1998 Private Integrated Services Network (PISN); Inter-exchange signalling protocol;Recall supplementary service [ISO/IEC 15052 (1997), modified]

288. EN 301 260 V1.2.1:2004 Private Integrated Services Network (PISN); Specification, functional modelsand information flows; Message waiting indication supplementary service[ISO/IEC 15505 (2003), modified]

289. EN 301 264 V1.1.1:1998 Private Integrated Services Network (PISN); Inter-exchange signalling protocol;Advice of Charge (AoC) supplementary service [ISO/IEC 15050 (1997),modified]

290. EN 301 479 V1.1.2:2000 Integrated Services Digital Network (ISDN); Line Hunting (LH) supplementaryservice; Service description

291. EN 301 502 V12.1.1:2015 Global System for Mobile communications (GSM); Harmonized EN for BaseStation Equipment covering the essential requirements of article 3.2 of theR&TTE Directive

292. EN 301 545-2 V1.1.1:2012 Digital Video Broadcasting (DVB); Second Generation DVB Interactive SatelliteSystem (DVB-RCS2); Part 2: Lower Layers for Satellite standard

293. EN 301 545-2 V1.2.1:2014 Digital Vid Seco Interactive Sa Part 2: Lower European Standard 301 545-2V1.2.1 (201 ideo Broadcasting (DVB); cond Generation DVB Satellite System(DVB-RCS2); er Layers for Satellite standard 2014-04) 2); ard

294. EN 301 691 V1.1.1:2001 Integrated Services Digital Network (ISDN); Remote Control (RC) service;Service description

295. EN 301 775 V1.1.1:2000 Digital Video Broadcasting (DVB); Specification for the carriage of VerticalBlanking Information (VBI) data in DVB bitstreams

39

296. EN 301 775 V1.2.1:2003 Digital Video Broadcasting (DVB); Specification for the carriage of VerticalBlanking Information (VBI) data in DVB bitstreams

297. EN 301 790 V1.2.2:2000 Digital Video Broadcasting (DVB); Interaction channel for satellite distributionsystems




301. EN 301 810 V1.2.1:2004 Private Integrated Services Network (PISN); Inter-exchange signalling protocol;Private User Mobility (PUM); Call handling Additional Network Feature (ANF)[ISO/IEC 17878 (2003), modified]

302. EN 301 813-1 V1.1.1:2000 Integrated Services Digital Network (ISDN) and Broadband Integrated ServicesDigital Network (B-ISDN); Generic Addressing and Transport (GAT) protocol;Part 1: Protocol specification [ITU-T Recommendation Q.860 (2000), modified]

303. EN 301 813-2 V1.1.1:2001 Integrated Services Digital Network (ISDN) and Broadband Integrated ServicesDigital Network (B-ISDN); Generic Addressing and Transport (GAT) protocol;Part 2: Protocol Implementation Conformance Statement (PICS) proformaspecification

304. EN 301 813-3 V1.1.1:2002 Integrated Services Digital Network (ISDN) and Broadband Integrated ServicesDigital Network (B-ISDN); Generic Addressing and Transport (GAT) protocol;Part 3: Test Suite Structure and Test Purposes (TSS&TP) specification

305. EN 301 813-4 V1.1.1:2002 Integrated Services Digital Network (ISDN) and Broadband Integrated ServicesDigital Network (B-ISDN); Generic Addressing and Transport (GAT) protocol;Part 4: Abstract Test Suite (ATS) and partial Protocol Implementation eXtraInformation for Testing (PIXIT) proforma specification

306. EN 301 819 V1.1.1:2000 Private Integrated Services Network (PISN); Specification, functional modelsand information flows; Common information Additional Network Feature(ANF) [ISO/IEC 15771 (1998), modified]

307. EN 301 820 V1.2.1:2004 Private Integrated Services Network (PISN); Inter-exchange signalling protocol;Common information Additional Network Feature (ANF) [ISO/IEC 15772(2003), modified]

308. EN 301 821 V1.2.1:2004 Private Integrated Services Network (PISN); Inter-exchange signalling protocol;Private User Mobility (PUM); Registration supplementary service [ISO/IEC17876 (2003), modified]

309. EN 301 842-1 V1.1.1:2002 Electromagnetic compatibility and Radio spectrum Matters (ERM); VHF air-ground Data Link (VDL) Mode 4 radio equipment; Technical characteristicsand methods of measurement for ground-based equipment; Part 1: Generaldescription and physical layer

310. EN 301 842-1 V1.2.1:2005 Electromagnetic compatibility and Radio spectrum Matters (ERM); VHF air-ground Digital Link (VDL) Mode 4 radio equipment; Technical characteristicsand methods of measurement for ground-based equipment; Part 1: EN forground equipment

311. EN 301 842-1 V1.3.1:2006 Electromagnetic compatibility and Radio spectrum Matters (ERM); VHF air-ground Digital Link (VDL) Mode 4 radio equipment; Technical characteristics

40

and methods of measurement for ground-based equipment; Part 1: EN forground equipment

312. EN 301 842-1 V1.3.2:2010 VHF air-ground Digital Link (VDL) Mode 4 radio equipment; Technicalcharacteristics and methods of measurement for ground-based equipment; Part1: EN for ground equipment

313. EN 301 842-1 V1.4.1:2006 Electromagnetic compatibility and Radio spectrum Matters (ERM); VHF air-ground Digital Link (VDL) Mode 4 radio equipment; Technical characteristicsand methods of measurement for ground-based equipment; Part 1: Generaldescription and physical layer

314. EN 301 842-2 V1.1.1:2002 Electromagnetic compatibility and Radio spectrum Matters (ERM); VHF air-ground Data Link (VDL) Mode 4 radio equipment; Technical characteristics &methods of measurement for ground-based equipment; Part 2: Data link layer

315. EN 301 842-2 V1.2.1:2003 Electromagnetic compatibility and Radio spectrum Matters (ERM); VHF air-ground Data Link (VDL) Mode 4 radio equipment; Technical characteristicsand methods of measurement for ground-based equipment; Part 2: Data linklayer

316. EN 301 842-2 V1.3.1:2005 Electromagnetic compatibility and Radio spectrum Matters (ERM); VHF air-ground Data Link (VDL) Mode 4 radio equipment; Technical characteristicsand methods of measurement for ground-based equipment; Part 2: Data linklayer

317. EN 301 842-2 V1.4.1:2005 Electromagnetic compatibility and Radio spectrum Matters (ERM); VHF air-ground Digital Link (VDL) Mode 4 radio equipment; Technical characteristicsand methods of measurement for ground-based equipment; Part 2: Generaldescription and data link layer



320. EN 301 842-2 V1.6.1:2010 VHF air-ground Digital Link (VDL) Mode 4 radio equipment; Technicalcharacteristics and methods of measurement for ground-based equipment; Part2: General description and data link layer

321. EN 301 842-3 V1.1.1:2005 Electromagnetic compatibility and Radio spectrum Matters (ERM); VHF air-ground Digital Link (VDL) Mode 4 radio equipment; Technical characteristicsand methods of measurement for ground-based equipment; Part 3: Additionalbroadcast aspects



41

324. EN 301 842-3 V1.3.1:2010 VHF air-ground digital Link (VDL) Mode 4 radio equipment; Technicalcharacteristics and methods of measurement for ground-based equipment; Part3: Additional broadcast aspects

325. EN 301 842-4 V1.1.1:2005 Electromagnetic compatibility and Radio spectrum Matters (ERM); VHF air-ground Digital Link (VDL) Mode 4 radio equipment; Technical characteristicsand methods of measurement for ground-based equipment; Part 4: Point-to-point functions



328. EN 301 842-5 V1.2.1:2005 Electromagnetic compatibility and Radio spectrum Matters (ERM); VHF air-ground Digital Link (VDL) Mode 4 radio equipment; Technical characteristicsand methods of measurement for ground-based equipment; Part 5: VDL4ground-based equipment compliance with the SES 552/2004 interoperabilityRegulation

329. EN 301 908-2 V6.2.1:2013 IMT cellular networks; Harmonized EN covering the essential requirements ofarticle 3.2 of the R&TTE Directive; Part 2: CDMA Direct Spread (UTRA FDD)User Equipment (UE)

330. EN 302 017-1 V1.1.1:2005 Electromagnetic compatibility and Radio spectrum Matters (ERM);Transmitting equipment for the Amplitude Modulated (AM) soundbroadcasting service; Part 1: Technical characteristics and test methods

331. EN 302 018-1 V1.2.1:2006 Electromagnetic compatibility and Radio spectrum Matters (ERM);Transmitting equipment for the Frequency Modulated (FM) soundbroadcasting service; Part 1: Technical characteristics and test methods

332. EN 302 036 V1.1.1:2003 Corporate telecommunication Networks (CN); Signalling interworkingbetween QSIG and H.323; Basic Services [Endorsement of ISO 23289 (2002) mod

333. EN 302 037 V1.1.1:2003 Private Integrated Services Network (PISN); Mapping functions for thetunnelling of QSIG through H.323 networks [Endorsement of ISO/IEC 23290(2002) modified]

334. EN 302 039-1 V1.1.1:2002 Intelligent Network (IN); Intelligent Network Capability Set 4 (CS4); IntelligentNetwork Application Protocol (INAP); Protocol specification; Part 1: Commonaspects

335. EN 302 039-2 V1.1.2:2002 Intelligent Network (IN); Intelligent Network Capability Set 4 (CS4); IntelligentNetwork Application Protocol (INAP); Protocol specification; Part 2: ServiceSwitching Function - Switching Control Function (SSF-SCF) Interface

336. EN 302 054-1 V1.1.1:2003 Electromagnetic compatibility and Radio spectrum Matters (ERM);Meteorological Aids (Met Aids); Radiosondes to be used in the 400,15 MHz to406 MHz frequency range with power levels ranging up to 200 mW; Part 1:Technical characteristics and test methods

337. EN 302 064-1 V1.1.2:2004 Electromagnetic compatibility and Radio spectrum Matters (ERM); WirelessVideo Links (WVL) operating in the 1,3 GHz to 50 GHz frequency band; Part 1:Technical characteristics and methods of measurement

42

338. EN 302 066-1 V1.2.1:2008 Electromagnetic compatibility and Radio spectrum Matters (ERM); Ground-and Wall- Probing Radar applications (GPR/WPR) imaging systems; Part 1:Technical characteristics and test methods

339. EN 302 077-1 V1.1.1:2005 Electromagnetic compatibility and Radio spectrum Matters (ERM);Transmitting equipment for the Terrestrial - Digital Audio Broadcasting (T-DAB) service; Part 1: Technical characteristics and test methods

340. EN 302 084 V1.1.1:2000 Transmission and Multiplexing (TM); The control of jitter and wander intransport networks

341. EN 302 099 V2.1.1:2014 Environmental Engineering (EE); Powering of equipment in access network342. EN 302 109 V1.1.1:2003 Terrestrial Trunked Radio (TETRA); Security; Synchronization mechanism for

end-to-end encryption343. EN 302 120 V1.1.1:2003 Services and Protocols for Advanced Networks (SPAN); Operation of the

Bearer Independant Call Control (BICC) protocol with SIG.4/PNNI1.0/AINIsignalling specification [ATM Forum specification AF-CS-VMOA-0146.000(2000) modified]

344. EN 302 152-1 V1.1.1:2003 Electromagnetic compatibility and Radio spectrum Matters (ERM); SatellitePersonal Locator Beacons (PLBs) operating in the 406,0 MHz to 406,1 MHzfrequency band; Part 1: Technical characteristics and methods of measurement

345. EN 302 194-1 V1.1.2:2006 Electromagnetic compatibility and Radio spectrum Matters (ERM); Navigationradar used on inland waterways: Part 1: Technical characteristics and methodsof measurement

346. EN 302 195-1 V1.1.1:2004 Electromagnetic compatibility and Radio spectrum Matters (ERM); Radioequipment in the frequency range 9 kHz to 315 kHz for Ultra Low PowerActive Medical Implants (ULP-AMI) and accessories; Part 1: Technicalcharacteristics and test methods

347. EN 302 208-1 V1.4.1:2011 Electromagnetic compatibility and Radio spectrum Matters (ERM); RadioFrequency Identification Equipment operating in the band 865 MHz to 868MHz with power levels up to 2 W; Part 1: Technical requirements and methodsof measurement

348. EN 302 208-1 V2.1.1:2015 Electromagnetic compatibility and Radio spectrum Matters (ERM); RadioFrequency Identification Equipment operating in the band 865 MHz to 868MHz with power levels up to 2 W and in the band 915 MHz to 921 MHz withpower levels up to 4 W; Part 1: Technical requirements and methods ofmeasurement

349. EN 302 208-2 V2.1.1:2015 Electromagnetic compatibility and Radio spectrum Matters (ERM); RadioFrequency Identification Equipment operating in the band 865 MHz to 868MHz with power levels up to 2 W and in the band 915 MHz to 921 MHz withpower levels up to 4 W; Part 2: Harmonized EN covering the essentialrequirements of article 3.2 of the R&TTE Directive

350. EN 302 245-1 V1.1.1:2005 Electromagnetic compatibility and Radio spectrum Matters (ERM);Transmitting equipment for the Digital Radio Mondiale (DRM) broadcastingservice; Part 1: Technical characteristics and test methods

351. EN 302 264-1 V1.1.1:2009 Electromagnetic compatibility and Radio spectrum Matters (ERM); Short RangeDevices; Road Transport and Traffic Telematics (RTTT); Short Range Radarequipment operating in the 77 GHz to 81 GHz band; Part 1: Technicalrequirements and methods of measurement

352. EN 302 288-1 V1.6.1:2012 Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range

43

Devices; Road Transport and Traffic Telematics (RTTT); Short range radarequipment operating in the 24 GHz range; Part 1: Technical requirements andmethods of measurement

353. EN 302 291-1 V1.1.1:2005 Electromagnetic compatibility and Radio spectrum Matters (ERM); Short RangeDevices (SRD); Close Range Inductive Data Communication equipmentoperating at 13,56 MHz; Part 1: Technical characteristics and test methods

354. EN 302 296 V1.1.1:2005 Electromagnetic compatibility and Radio spectrum Matters (ERM);Transmitting equipment for the digital television broadcast service, Terrestrial(DVB-T); Harmonized EN under article 3.2 of the R&TTE Directive

355. EN 302 304 V1.1.1:2004 Digital Video Broadcasting (DVB); Transmission System for HandheldTerminals (DVB-H)

356. EN 302 307 V1.3.1:2013 Digital Video Broadcasting (DVB); Second generation framing structure,channel coding and modulation systems for Broadcasting, Interactive Services,News Gathering and other broadband satellite applications (DVB-S2)

357. EN 302 307-1 V1.4.1:2014 Digital Video Broadcasting (DVB); Second generation framing structure,channel coding and modulation systems for Broadcasting, Interactive Services,News Gathering and other broadband satellite applications; Part 1: DVB-S2

358. EN 302 307-2 V1.1.1:2015 Digital Video Broadcasting (DVB); Second generation framing structure,channel coding and modulation systems for Broadcasting, Interactive Services,News Gathering and other broadband satellite applications; Part 2: DVB-S2Extensions (DVB-S2X)

359. EN 302 326-1 V1.2.2:2007 Fixed Radio Systems; Multipoint Equipment and Antennas; Part 1: Overviewand Requirements for Digital Multipoint Radio Systems

360. EN 302 372-1 V1.2.1:2011 Electromagnetic compatibility and Radio spectrum Matters (ERM); Short RangeDevices (SRD); Equipment for Detection and Movement; Tanks Level ProbingRadar (TLPR) operating in the frequency bands 5,8 GHz, 10 GHz, 25 GHz, 61GHz and 77 GHz; Part 1: Technical characteristics and test methods

361. EN 302 510-1 V1.1.1:2007 Electromagnetic compatibility and Radio spectrum Matters (ERM); Radioequipment in the frequency range 30 MHz to 37,5 MHz for Ultra Low PowerActive Medical Membrane Implants and Accessories; Part 1: Technicalcharacteristics and test methods

362. EN 302 536-1 V1.1.1:2007 Electromagnetic compatibility and Radio spectrum Matters (ERM); Short RangeDevices (SRD); Radio equipment in the frequency range 315 kHz to 600 kHz;Part 1: Technical characteristics and test methods

363. EN 302 537-1 V1.1.2:2007 Electromagnetic compatibility and Radio spectrum Matters (ERM); Short RangeDevices (SRD); Ultra Low Power Medical Data Service Systems operating in thefrequency range 401 MHz to 402 MHz and 405 MHz to 406 MHz; Part 1:Technical characteristics and test methods

364. EN 302 550-1-1 V1.1.1 (2010-02) Satellite Earth Stations and Systems (SES); Satellite Digital Radio (SDR)Systems; Part 1: Physical Layer of the Radio Interface; Sub-part 1: OuterPhysical Layer

365. EN 302 550-1-2 V1.1.1 (2010-02) Satellite Earth Stations and Systems (SES); Satellite Digital Radio (SDR)Systems; Part 1: Physical Layer of the Radio Interface; Sub-part 2: Inner PhysicalLayer Single Carrier Modulation

366. EN 302 550-1-3 V1.1.1 (2010-02) Satellite Earth Stations and Systems (SES); Satellite Digital Radio (SDR)Systems; Part 1: Physical Layer of the Radio Interface; Sub-part 3: Inner PhysicalLayer Multi Carrier Modulation

44

367. EN 302 617-1 V1.1.1 (2009-01) Electromagnetic compatibility and Radio spectrum Matters (ERM); Ground-based UHF radio transmitters, receivers and transceivers for the UHFaeronautical mobile service using amplitude modulation; Part 1: Technicalcharacteristics and methods of measurement

368. EN 302 636-1 V1.2.1 (2014-04) Intelligent Transport Systems (ITS); Vehicular Communications;GeoNetworking; Part 1: Requirements

369. EN 302 636-2 V1.2.1 (2013-11) Intelligent Transport Systems (ITS); Vehicular Communications;GeoNetworking; Part 2: Scenarios

370. EN 302 636-3 V1.2.1 (2014-12) Intelligent Transport Systems (ITS); Vehicular Communications;GeoNetworking; Part 3: Network Architecture

371. EN 302 636-4-1 V1.2.1 (2014-07) Intelligent Transport Systems (ITS); Vehicular Communications;GeoNetworking; Part 4: Geographical addressing and forwarding for point-to-point and point-to-multipoint communications; Sub-part 1: Media-IndependentFunctionality

372. EN 302 636-5-1 V1.2.1 (2014-08) Intelligent Transport Systems (ITS); Vehicular Communications;GeoNetworking; Part 5: Transport Protocols; Sub-part 1: Basic TransportProtocol

373. EN 302 636-6-1 V1.2.1 (2014-05) Intelligent Transport Systems (ITS); Vehicular Communications;GeoNetworking; Part 6: Internet Integration; Sub-part 1: Transmission of IPv6Packets over GeoNetworking Protocols

374. EN 302 646-1 V7.0.2 (2000-09) Integrated Services Digital Network (ISDN); Signalling System No.7; Digitalcellular telecommunications system (Phase 2+); Application of ISDN User Part(ISUP) version 3 for the ISDN-Public Land Mobile Network (PLMN) signallinginterface; Part 1: Protocol specification (GSM 09.14 version 7.0.2 Release 1998)

375. EN 302 646-2 V7.1.1 (2000-11) Integrated Services Digital Network (ISDN); Signalling System No.7 (SS7);Digital cellular telecommunications system (Phase 2+); Application of ISDNUser Part (ISUP) version 3 for the ISDN-Public Land Mobile Network (PLMN)signalling interface; Part 2: Protocol Implementation Conformance Statement(PICS) proforma specification

376. EN 302 646-3 V7.1.1 (2000-11) Integrated Services Digital Network (ISDN); Signalling System No.7 (SS7);Digital cellular telecommunications system (Phase 2+); Application of ISDNUser Part (ISUP) version 3 for the ISDN-Public Land Mobile Network (PLMN)signalling interface; Part 3: Test Suite Structure and Test Purposes (TSS&TP)specification

377. EN 302 646-4 V7.0.1 (2000-11) Integrated Service Digital Network (ISDN); Signalling System No.7 (SS7);Digital cellular telecommunications system (Phase 2+); Application of ISDNUser Part (ISUP) version 3 for the ISDN-Public Land Mobile Network (PLMN)signalling interface; Part 4: Abstract Test Suite (ATS) and ProtocolImplementation eXtra Information for Testing (PIXIT) proforma specification

378. EN 302 663 V1.2.1 (2013-07) Intelligent Transport Systems (ITS); Access layer specification for IntelligentTransport Systems operating in the 5 GHz frequency band

379. EN 302 665 V1.1.1 (2010-09) Intelligent Transport Systems (ITS); Communications Architecture380. EN 302 842-1 V1.3.1:2006 Electromagnetic compatibility and Radio spectrum Matters (ERM); VHF air-

ground Digital Link (VDL) Mode 4 radio equipment; Technical characteristicsand methods of measurement for aeronautical mobile (airborne) equipment;Part 1: General description and physical layer

381. EN 302 842-2 V1.3.1:2010 VHF air-ground and air-air Digital Link (VDL) Mode 4 radio equipment;

45

Technical characteristics and methods of measurement for aeronautical mobile(airborne) equipment; Part 2: General description and data link layer

382. EN 302 842-3 V1.3.1:2006 Electromagnetic compatibility and Radio spectrum Matters (ERM); VHF air-ground Digital Link (VDL) Mode 4 radio equipment; Technical characteristicsand methods of measurement for aeronautical mobile (airborne) equipment;Part 3: Additional broadcast aspects

383. EN 303 098-1 V1.2.1:2014 Electromagnetic compatibility and Radio spectrum Matters (ERM); Maritimelow power personal locating devices employing AIS; Part 1: Technicalcharacteristics and methods of measurement

384. EN 303 098-2 V1.2.1:2014 Electromagnetic compatibility and Radio spectrum Matters (ERM); Maritimelow power personal locating devices employing AIS; Part 2: Harmonized ENcovering the essential requirements of article 3.2 of the R&TTE Directive

385. EN 303 135 V1.1.1:2014 Electromagnetic compatibility and Radio spectrum Matters (ERM); CoastalSurveillance, Vessel Traffic Services and Harbour Radars (CS/VTS/HR);Harmonized EN covering the essential requirements of article 3.2 of the R&TTEDirective

386. EN 303 203-1 V1.1.1 (2014-11) Electromagnetic compatibility and Radio spectrum Matters (ERM); Short RangeDevices (SRD); Medical Body Area Network Systems (MBANSs) operating inthe 2 483,5 MHz to 2 500 MHz range; Part 1: Technical characteristics and testmethods

387. EN 303 203-2 V1.1.1:2014 Electromagnetic compatibility and Radio spectrum Matters (ERM); Short RangeDevices (SRD); Medical Body Area Network Systems (MBANSs) operating inthe 2 483,5 MHz to 2 500 MHz range; Part 2: Harmonized EN covering theessential requirements of article 3.2 of the R&TTE Directive

388. EN 303 204-1 V1.1.1 (2014-10) Electromagnetic compatibility and Radio spectrum Matters (ERM); Network BasedShort Range Devices (SRD); Radio equipment to be used in the 870 MHz to 876MHz frequency range with power levels ranging up to 500 mW; Part 1: Technicalcharacteristics and test methods

389. EN 303 204-2 V1.1.1:2014 Electromagnetic compatibility and Radio spectrum Matters (ERM); Network BasedShort Range Devices (SRD); Radio equipment to be used in the 870 MHz to 876MHz frequency range with power levels ranging up to 500 mW; Part 2:Harmonized EN covering the essential requirements of article 3.2 of the R&TTEDirective

390. EN 303 212 V1.1.1 (2010-06) Airport Collaborative Decision Making (A-CDM); Community Specification forapplication under the Single European Sky Interoperability Regulation EC 552/2004

391. EN 303 213-1 V1.3.1 (2012-04) Advanced Surface Movement Guidance and Control System (A-SMGCS); Part 1:Community Specification for application under the Single European SkyInteroperability Regulation EC 552/2004 for A-SMGCS Level 1 including externalinterfaces

392. EN 303 213-2 V1.3.1 (2012-12) Advanced Surface Movement Guidance and Control System (A-SMGCS); Part2: Community Specification for application under the Single European SkyInteroperability Regulation EC 552/2004 for A-SMGCS Level 2 includingexternal interfaces

393. EN 303 213-3 V1.1.1 (2010-10) Advanced Surface Movement Guidance and Control System (A-SMGCS); Part3: Community Specification for application under the Single European SkyInteroperability Regulation EC 552/2004 for a deployed cooperative sensorincluding its interfaces

46

394. EN 303 213-4-1 V1.1.1 (2010-10) Advanced Surface Movement Guidance and Control System (A-SMGCS); Part4: Community Specification for application under the Single European SkyInteroperability Regulation EC 552/2004 for a deployed non-cooperative sensorincluding its interfaces; Sub-part 1: Generic require. for non-cooperative sensor

395. EN 303 213-4-2 V1.1.1 (2010-10) Advanced Surface Movement Guidance and Control System (A-SMGCS); Part4: Community Specification for application under the Single European SkyInteroperability Regulation EC 552/2004 for a deployed non-cooperative sensorincluding its interfaces; Sub-part 2: Specific requirements for a deployedSurface Movement Radar sensor

396. EN 303 213-6-1 V1.2.1 (2013-11) Advanced Surface Movement Guidance and Control System (A-SMGCS); Part6: Harmonized EN covering the essential requirements of article 3.2 of theR&TTE Directive for deployed surface movement radar sensors; Sub-part 1: X-band sensors using pulsed signals and transmitting power up to 100 kW

397. EN 303 214 V1.2.1 (2012-04) Data Link Services (DLS) System; Community Specification for applicationunder the Single European Sky Interoperability Regulation EC 552/2004;Requirements for ground constituents and system testing

398. EN 303 215 V1.3.1 (2015-04) Environmental Engineering (EE); Measurement methods and limits for powerconsumption in broadband telecommunication networks equipment

399. EN 305 550-1 V1.2.1 (2014-10) Electromagnetic compatibility and Radio spectrum Matters (ERM); Short RangeDevices (SRD); Radio equipment to be used in the 40 GHz to 246 GHzfrequency range; Part 1: Technical characteristics and test methods

400. EN 305 550-2 V1.2.1:2014 Electromagnetic compatibility and Radio spectrum Matters (ERM); Short RangeDevices (SRD); Radio equipment to be used in the 40 GHz to 246 GHzfrequency range; Part 2: Harmonized EN covering the essential requirements ofarticle 3.2 of the R&TTE Directive

Technical Committee No. 12“Metrology and measurements”, 20 standards


1. EN 12480:2015 Gas meters - Rotary displacement gas meters2. EN ISO 13225:2012 Geometrical product specifications (GPS) - Dimensional measuring equipment;

Height gauges - Design and metrological characteristics (ISO 13225:2012)3. EN ISO 25178-2:2012 Geometrical product specifications (GPS) - Surface texture: Areal - Part 2:

Terms, definitions and surface texture parameters (ISO 25178-2:2012)4. EN ISO 17450-1:2011 Geometrical product specifications (GPS) - General concepts - Part 1: Model for

geometrical specification and verification (ISO 17450-1:20115. EN ISO 1119:2011 Geometrical product specifications (GPS) - Series of conical tapers and taper

angles (ISO 1119:2011)6. EN ISO 3040:2012 Geometrical prod. specifications (GPS) - Dimensioning and tolerancing - Cones7. EN ISO 14638:2015 Geometrical product specifications (GPS) - Matrix model (ISO 14638:2015)8. EN ISO 2692:2014 Geometrical product specifications (GPS) - Geometrical tolerancing - Maximum

material requirement (MMR), least material requirement (LMR) and reciprocityrequirement (RPR) (ISO 2692:2014)

47

9. EN ISO 16610-20:2015 Geometrical product specifications (GPS) - Filtration - Part 20: Linear profilefilters: Basic concepts (ISO 16610-20:2015)

10. EN ISO 16610-29:2015 Geometrical product specifications (GPS) - Filtration - Part 29: Linear profilefilters: Spline wavelets (ISO 16610-29:2015)

11. EN ISO 16610-1:2015 Geometrical product specifications (GPS) - Filtration - Part 1: Overview andbasic concepts (ISO 16610-1:2015)

Technical Committee No. 19“Petroleum products, lubricants and related products”, 42 standards


1. EN ISO 13534:2000 Petroleum and natural gas industries - Drilling and production equipment -Inspection, maintenance, repair and remanufacture of hoisting equipment (ISO13534:2000)

2. EN ISO 12736:2014 Petroleum and natural gas industries - Wet thermal insulation coatings forpipelines, flow lines, equipment and subsea structures (ISO 12736:2014)

3. EN ISO 10439-1:2015 Petroleum, petrochemical and natural gas industries - Axial and centrifugalcompressors and expander-compressors - Part 1: General requirements (ISO10439-1:2015)

4. EN ISO 10439-2:2015 Petroleum, petrochemical and natural gas industries - Axial and centrifugalcompressors and expander-compressors - Part 2: Non-integrally gearedcentrifugal and axial compressors (ISO 10439-2:2015)

5. EN ISO 10439-3:2015 Petroleum, petrochemical and natural gas industries - Axial and centrifugalcompressors and expander-compressors - Part 3: Integrally geared centrifugalcompressors (ISO 10439-3:2015)

6. EN ISO 10439-4:2015 Petroleum, petrochemical and natural gas industries - Axial and centrifugalcompressors and expander-compressors - Part 4: Expander-compressors(ISO10439-4:2015)

7. EN ISO 15551-1:2015 Petroleum and natural gas industries - Drilling and production equipment -Part 1: Electric submersible pump systems for artificial lift (ISO 15551-1:2015)

8. EN ISO 17945:2015 Petroleum, petrochemical and natural gas industries - Metallic materialsresistant to sulfide stress cracking in corrosive petroleum refining environments(ISO 17945:2015)

9. EN ISO 19901-3:2014 Petroleum and natural gas industries - Specific requirements for offshorestructures - Part 3: Topsides structure (ISO 19901-3:2014)

10. EN 14161:2011+A1:2015 Petroleum and natural gas industries - Pipeline transportation systems (ISO13623:2009 modified)

11. CR 13840:2000 Petroleum products - Determination of polycyclic aromatic hydrocarbons -Ultraviolet (UV) spectrometric method

12. EN 16136:2015 Automotive fuels - Determination of manganese and iron content in unleadedpetrol - Inductively coupled plasma optical emission spectrometry method

13. EN 16568:2014 Automotive fuels - Blends of Fatty acid methyl ester (FAME) with diesel fuel -Determination of oxidation stability by rapidly accelerated oxidation method at120 °C

48

14. CEN/TR 15745:2015 Liquid petroleum products - Determination of hydrocarbon types andoxygenates via multidimensional gas chromatography method - Round Robinresearch report

15. EN ISO 3679:2015 Determination of flash no-flash and flash point - Rapid equilibrium closed cupmethod (ISO 3679:2015)

16. EN 13203-2:2015 Gas-fired domestic appliances producing hot water - Part 2: Assessment ofenergy consumption

17. EN ISO 16948:2015 Solid biofuels - Determination of total content of carbon, hydrogen andnitrogen (ISO 16948:2015)

18. EN ISO 16967:2015 Solid biofuels - Determination of major elements - Al, Ca, Fe, Mg, P, K, Si, Naand Ti (ISO 16967:2015)

19. EN ISO 16968:2015 Solid biofuels - Determination of minor elements (ISO 16968:2015)20. EN ISO 16994:2015 Solid biofuels - Determination of total content of sulfur and chlorine (ISO

16994:2015)21. EN ISO 16995:2015 Solid biofuels - Determination of the water soluble chloride, sodium and

potassium content (ISO 16995:2015)22. EN ISO 16993:2015 Solid biofuels - Conversion of analytical results from one basis to another (ISO

16993:2015)23. ISO 10307-2:2009/Cor 1:2010 Petroleum products - Total sediment in residual fuel oils - Part 2: Determination

using standard procedures for ageing24. ISO 12152:2012 Lubricants, industrial oils and related products - Determination of the foaming

and air release properties of industrial gear oils using a spur gear test rig -Flender foam test procedure

25. ISO 15911:2000 Petroleum products - Estimation of net specific energy of aviation turbine fuelsusing hydrogen content data

26. ISO 1998-1:1998/Cor 1:1999 Petroleum industry - Terminology - Part 1: Raw materials and products27. ISO 1998-5:1998/Cor 1:1999 Petroleum industry - Terminology - Part 5: Transport, storage, distribution28. ISO 2176:1995/Cor 1:2001 Petroleum products - Lubricating grease - Determination of dropping point29. ISO 26422:2014 Petroleum and related products - Determination of shear stability of lubricating

oils containing polymers - Method using a tapered roller bearing30. ISO 2909:2002 Petroleum products - Calculation of viscosity index from kinematic viscosity31. ISO 3012:1999 Petroleum products - Determination of thiol (mercaptan) sulfur in light and

middle distillate fuels - Potentiometric method32. ISO 3014:1993 Petroleum products - Determination of the smoke point of kerosine33. ISO 3448:1992/Cor 1:1993 Industrial liquid lubricants - ISO viscosity classification34. ISO 3648:1994 Aviation fuels - Estimation of net specific energy35. ISO 3648:1994/Cor 1:1996 Aviation fuels - Estimation of net specific energy36. ISO 3771:2011 Petroleum products - Determination of base number - Perchloric acid

potentiometric titration method37. ISO 3837:1993/Cor 1:1994 Liquid petroleum products - Determination of hydrocarbon types - Fluorescent

indicator adsorption method38. ISO 3837:1993/Cor 2:1996 Liquid petroleum products - Determination of hydrocarbon types - Fluorescent

indicator adsorption method39. ISO 6247:1998/Cor 1:1999 Petroleum products - Determ. of foaming characteristics of lubricating oils40. ISO 6618:1997/Cor 1:1999 Petroleum products and lubricants - Determination of acid or base number -

Colour-indicator titration method

49

41. ISO 7537:1997 Petroleum products - Determination of acid number - Semi-micro colour-indicator titration method

42. ISO 7941:1988 Commercial propane and butane - Analysis by gas chromatography

Technical Committee No. 50“Lighting columns and spigots, and their joints”, 3 standards


1. CEN/TR 13201-1:2014 Road lighting - Part 1: Guidelines on selection of lighting classes2. ISO 16508:1999 (CIE S

006.1/E:1998)Road traffic lights - Photometric properties of 200 mm roundel signals

3. ISO 30061:2007 (CIE S020/E:2007)

Emergency lighting

Technical Committee No. 51“Cement and building limes. Gypsum and gypsum based product”,

35 standards


1. EN 513:1999 Unplasticized polyvinylchloride (PVC-U) profiles for the fabrication ofwindows and doors - Determination of the resistance to artificial weathering

2. EN 1158:1997/A1:2002 Building hardware - Door cordinator devices - Requirements and test methods3. EN 12209:2003/AC:2005 Building hardware - Locks and latches - Mechanically operated locks, latches

and locking plates - Requirements and test methods4. EN 1158:1997/A1:2002/AC:2006 Building hardware - Door coordinator devices - Requirements and test methods5. EN 13830:2015 Curtain walling - Product standard6. EN 1303:2015 Building hardware - Cylinders for locks - Requirements and test methods7. EN 13561:2015 External blinds and awnings - Performance requirements including safety8. EN 13659:2015 Shutters and external venetian blinds - Performance requirements including

safety9. EN 13637:2015 Building hardware - Electrically controlled exit systems for use on escape

routes - Requirements and test methods10. EN 12217:2015 Doors - Operating forces - Requirements and classification11. EN 13120:2009+A1:2014/AC:2015 Internal blinds - Performance requirements including safety12. EN 13639:2002/AC:2004 Determination of total organic carbon in limestone13. EN 14647:2005/AC:2006 Calcium aluminate cement - Composition, specifications and conformity

criteria14. EN 459-1:2015 Building lime - Part 1: Definitions, specifications and conformity criteria15. EN 459-3:2015 Building lime - Part 3: Conformity evaluation16. EN 13282-2:2015 Hydraulic road binders - Part 2: Normal hardening hydraulic road binders -

Composition, specifications and conformity criteria

50

17. EN 15743:2010+A1:2015 Supersulfated cement - Composition, specifications and conformity criteria18. EN 13454-1:2004 Binders, composite binders and factory made mixtures for floor screeds based

on calcium sulfate - Part 1: Definitions and requirements19. EN 14246:2006/AC:2007 Gypsum elements for suspended ceilings - Definitions, requirements and test

methods20. EN 14195:2014 Metal framing components for gypsum board systems - Definitions,

requirements and test methods21. EN 13892-3:2014 Methods of test for screed materials - Part 3: Determination of wear resistance -

Böhme22. ISO 29581-1:2009 Cement - Test methods - Part 1: Analysis by wet chemistry23. ISO 29581-2:2010 Cement - Test methods - Part 2: Chemical analysis by X-ray fluorescence24. ISO 29582-1:2009 Methods of testing cement - Determination of the heat of hydration - Part 1:

Solution method25. ISO 29582-2:2009 Methods of testing cement - Determination of the heat of hydration - Part 2:

Semi-adiabatic method26. ISO 679:2009 Cement - Test methods - Determination of strength27. ISO 863:2008 Cement - Test methods - Pozzolanicity test for pozzolanic cements28. ISO 9597:2008 Cement - Test methods - Determination of setting time and soundness29. ISO/TR 12389:2009 Methods of testing cement - Report of a test programme - Chemical analysis by

x-ray fluorescence30. ISO 10904:2011 Fibre-cement corrugated sheets and fittings for roofing and cladding31. ISO 22306:2007 Fibre-reinforced cement pipe, joints and fittings for gravity systems32. ISO 390:1993 Products in fibre-reinforced cement - Sampling and inspection33. ISO 8335:1987 Cement-bonded particleboards - Boards of Portland or equivalent cement

reinforced with fibrous wood particles34. ISO 8336:2009 Fibre-cement flat sheets - Product specification and test methods35. ISO 9125:2009 Fibre-cement slates and fittings - Product specification and test methods

Technical Committee No. 52“Safety of toys”, 4 standards


1. ISO/IEC Guide 50:2014 Safety aspects - Guidelines for child safety in standards and other specifications2. EN 71-14:2014 Safety of toys - Part 14: Trampolines for domestic use3. EN 13782:2015 Temporary structure - Tents - Safety4. CEN/TR 16512:2015 Child use and care articles - Guidelines for the safety of children’s slings

51

Technical Committee No. 55“Dentistry”, 14 standards


1. EN ISO 11499:2014 Dentistry - Single-use cartridges for local anaesthetics (ISO 11499:2014)2. EN ISO 15841:2014 Dentistry - Wires for use in orthodontics (ISO 15841:2014)3. EN ISO 9680:2014 Dentistry - Operating lights (ISO 9680:2014)4. EN ISO 9687:2015 Dentistry - Graphical symbols for dental equipment (ISO 9687:2015)5. EN ISO 9173-3:2014 Dentistry - Extraction forceps - Part 3: Design (ISO 9173-3:2014)6. EN ISO 7494-2:2015 Dentistry - Dental units - Part 2: Air, water, suction and wastewater systems

(ISO 7494-2:2015)7. EN ISO 11499:2014 Dentistry - Single-use cartridges for local anaesthetics (ISO 11499:2014)8. EN ISO 24234:2015 Dentistry - Dental amalgam (ISO 24234:2015)9. EN ISO 16443:2014 Dentistry - Vocabulary for dental implants systems and related procedure (ISO

16443:2014)10. EN ISO 16635-2:2014 Dentistry - Dental rubber dam instruments - Part 2: Clamp forceps11. EN ISO 17730:2014 Dentistry - Fluoride varnishes (ISO 17730:2014)12. EN ISO 15841:2014 Dentistry - Wires for use in orthodontics (ISO 15841:2014)13. EN ISO 13116:2014 Dentistry - Test Method for Determining Radio-Opacity of Materials (ISO

13116:2014)14. EN ISO 16635-1:2014 Dentistry - Dental rubber dam technique - Part 1: Hole punch (ISO 16635-

1:2013)

Technical Committee No. 67“Ceramic in building. Thermal insulating materials and products.

Refractory products and materials”, 25 standards


1. EN 13165:2012+A1:2015 Thermal insulation products for buildings - Factory made rigid polyurethanefoam (PU) products - Specification

2. EN 13166:2012+A1:2015 Thermal insulation products for buildings - Factory made phenolic foam (PF)products - Specification

3. EN 13169:2012+A1:2015 Thermal insulation products for buildings - Factory made expanded perliteboard (EPB) products - Specification

4. EN 13171:2012+A1:2015 Thermal insulation products for buildings - Factory made wood fibre (WF)products - Specification

5. EN 13167:2012+A1:2015 Thermal insulation products for buildings - Factory made cellular glass (CG)products - Specification

6. EN 13168:2012+A1:2015 Thermal insulation products for buildings - Factory made wood wool (WW)products - Specification

7. EN 16069:2012+A1:2015 Thermal insulation products for buildings - Factory made products ofpolyethylene foam (PEF) - Specification

52

8. EN 13163:2012+A1:2015 Thermal insulation products for buildings - Factory made expandedpolystyrene (EPS) products - Specification

9. EN 13170:2012+A1:2015 Thermal insulation products for buildings - Factory made products ofexpanded cork (ICB) - Specification

10. EN 13162:2012+A1:2015 Thermal insulation products for buildings - Factory made mineral wool (MW)products - Specification

11. EN 13164:2012+A1:2015 Thermal insulation products for buildings - Factory made extruded polystyrenefoam (XPS) products - Specification

12. EN 16012:2012+A1:2015 Thermal insulation for buildings - Reflective insulation products -Determination of the declared thermal performance

13. EN 1013:2012+A1:2014 Light transmitting single skin profiled plastics sheets for internal and externalroofs, walls and ceilings - Requirements and test methods

14. EN 16153:2013+A1:2015 Light transmitting flat multiwall polycarbonate (PC) sheets for internal andexternal use in roofs, walls and ceilings - Requirements and test methods

15. ISO 17138:2014 Fine ceramics (advanced ceramics, advanced technical ceramics) - Mechanicalproperties of ceramic composites at room temperature - Determination offlexural strength

16. ISO 17139:2014 Fine ceramics (advanced ceramics, advanced technical ceramics) -Thermophysical properties of ceramic composites - Determination of thermalexpansion

17. ISO 17140:2014 Fine ceramics (advanced ceramics, advanced technical ceramics) - Mechanicalproperties of ceramic composites at room temperature - Determination offatigue properties at constant amplitude

18. ISO 17142:2014 Fine ceramics (advanced ceramics, advanced technical ceramics) - Mechanicalproperties of ceramic composites at high temperature in air at atmosphericpressure - Determination of fatigue properties at constant amplitude

19. ISO 17161:2014 Fine ceramics (advanced ceramics, advanced technical ceramics) - Ceramiccomposites - Determination of the degree of misalignment in uniaxialmechanical tests

20. ISO 17162:2014 Fine ceramics (advanced ceramics, advanced technical ceramics) - Mechanicalproperties of monolithic ceramics at room temperature - Determination ofcompressive strength

21. ISO 17172:2014 Fine ceramics (advanced ceramics, advanced technical ceramics) -Determination of compaction properties of ceramic powders

22. ISO 13007-2:2013 Ceramic tiles - Grouts and adhesives - Part 2: Test methods for adhesives23. ISO 13007-1:2014 Ceramic tiles - Grouts and adhesives - Part 1: Terms, definitions and

specifications for adhesives24. ISO 15686-1:2011 Buildings and constructed assets - Service life planning - Part 1: General

principles and framework25. ISO 15686-2:2012 Buildings and constructed assets - Service life planning - Part 2: Service life

prediction procedures

53

Technical Committee No. 74“Flanges and their joints”, 8 standards


1. EN 16617:2015 Pipework - Corrugated metal hose assemblies for combustible gas -Performance requirements, testing and marking

2. EN ISO 6149-4:2014 Connections for fluid power and general use - Ports and stud ends with ISO 261metric threads and O-ring sealing - Part 4: Dimensions, design, test methodsand requirements for external hex and internal hex port plugs (ISO 6149-4:2006)

3. ISO 10300-1:2014 Calculation of load capacity of bevel gears - Part 1: Introduction and generalinfluence factors

4. ISO 10300-2:2014 Calculation of load capacity of bevel gears - Part 2: Calculation of surfacedurability (pitting)

5. ISO 10300-3:2014 Calculation of load capacity of bevel gears - Part 3: Calculation of tooth rootstrength

6. ISO/TR 15144-1:2014 Calculation of micropitting load capacity of cylindrical spur and helical gears -Part 1: Introduction and basic principles

7. ISO/TR 15144-2:2014 Calculation of micropitting load capacity of cylindrical spur and helical gears -Part 2: Examples of calculation for micropitting

8. ISO 14104:2014 Gears - Surface temper etch inspection after grinding, chemical method

Technical Committee No. 104“Concrete and related products. Automation and management in

construction”, 6 standards


1. EN 934-6:2001 Admixtures for concrete, mortar and grout - Part 6: Sampling, conformitycontrol and evaluation of conformity

2. EN 480-13:2015 Admixtures for concrete, mortar and grout - Test methods - Part 13: Referencemasonry mortar for testing mortar admixtures

3. EN 12794:2005+A1:2007 Precast concrete products - Foundation piles4. EN 14908-6:2014 Open Data Communication in Building Automation, Controls and Building

Management - Control Network Protocol - Part 6: Application elements5. EN ISO 10591:2005 Building construction - Sealants - Determination of adhesion/cohesion

properties of sealants after immersion in water (ISO 10591:2005)6. EN ISO 11432:2005 Building construction - Sealants - Determination of resistance to compression

(ISO 11432:2005)

54

Technical Committee No. 114“Safety of machinery and fire safety”, 25 standards


1. EN ISO 25745-2:2015 Energy performance of lifts, escalators and moving walks - Part 2: Energycalculation and classification for lifts (elevators) (ISO 25745-2:2015)

2. EN ISO 25745-3:2015 Energy performance of lifts, escalators and moving walks - Part 3: Energycalculation and classification of escalators and moving walks (ISO 25745-3:2015)

3. EN 81-72:2015 Safety rules for the construction and installation of lifts - Particular applicationsfor passenger and goods passenger lifts - Part 72: Firefighters lifts

4. EN 54-31:2014 Fire detection and fire alarm system - Part 31: Multi-sensor fire detectors - Pointdetectors using a comb. of smoke, carbon monoxide and optionally heat sensors

5. EN 54-30:2015 Fire detection and fire alarm systems - Part 30: Multi-sensor fire detectors -Point detectors using a combination of carbon monoxide and heat sensors

6. EN 54-27:2015 Fire detection and fire alarms systems - Part 27: Duct smoke detectors7. EN 54-12:2015 Fire detection and fire alarm systems - Part 12: Smoke detectors - Line detectors

using an optical beam8. EN 54-26:2015 Fire detection and fire alarm systems - Part 26: Carbon monoxide detectors -

Point detectors9. EN 54-29:2015 Fire detection and fire alarm systems - Part 29: Multi-sensor fire detectors -

Point detectors using a combination of smoke and heat sensors10. EN 1808:2015 Safety requirements for suspended access equipment - Design calculations,

stability criteria, construction - Examinations and tests11. EN 13381-3:2015 Test methods for determining the contribution to the fire resistance of

structural members - Part 3: Applied protection to concrete members12. EN 15882-2:2015 Extended application of results from fire resistance tests for service installations

- Part 2: Fire dampers13. EN ISO 23125:2015 Machine tools - Safety - Turning machines (ISO 23125:2015)14. EN 16474:2015 Plastics and rubber machines - Tyre curing machines - Safety requirements15. EN 1417:2014 Plastics and rubber machines - Two-roll mills - Safety requirements16. EN 13001-1:2015 Cranes - General design - Part 1: General principles and requirements17. EN 16564:2014 Machines and plants for mining and tooling of natural stone - Safety -

Requirements for bridge type sawing/milling machines, included numericalcontrol (NC/CNC) versions

18. EN 15059:2009+A1:2015 Snow grooming equipment - Safety requirements19. EN 15467:2014 Food processing machinery - Fish heading and filleting machines - Safety and

hygiene requirements20. EN ISO 23771:2015 Textile machinery - Guide to the design of textile machinery for reduction of

the noise emissions (ISO 23771:2015)21. EN 13243:2015 Safety requirements for cableway installations designed to carry persons -

Electrical equipment other than for drive systems22. EN 12930:2015 Safety require. for cableway installations design. to carry persons - Calculations23. EN 12929-2:2015 Safety requirements for cableway installations designed to carry persons -

General requirements - Part 2: Additional requirements for reversible bicableaerial ropeways without carrier truck brakes

55

24. EN 12929-1:2015 Safety requirements for cableway installations designed to carry persons -General requirements - Part 1: Requirements for all installations

25. EN 14462:2015 Surface treatment equipment - Noise test code for surface treatment equipmentincluding its ancillary handling equipment - Accuracy grades 2 and 3

Technical Committee No. 129“Glass”, 2 standards


1. EN 15752-1:2014 Glass in building - Adhesive backed polymeric film - Part 1: Definitions andrequirements

2. ISO 9885:1991 Wide-mouth glass containers - Deviation from flatness of top sealing surface -Test methods

Technical Committee No. 133“Metals and their alloys”, 49 standards


1. EN ISO 18278-1:2015 Resistance welding - Weldability - Part 1: General requirements for theevaluation of weldability for resistance spot, seam and projection welding ofmetallic materials (ISO 18278-1:2015)

2. EN ISO 2503:2009/A1:2015 Gas welding equipment - Pressure regulators and pressure regulators withflow-metering devices for gas cylinders used in welding, cutting and alliedprocesses up to 300 bar (30 MPa) (ISO 2503:2009/Amd 1:2015)

3. EN ISO 5172:2006/A2:2015 Gas welding equipment - Blowpipes for gas welding, heating and cutting -Specifications and tests (ISO 5172:2006/Amd 2:2015)

4. EN ISO 7291:2010/A1:2015 Gas welding equipment - Pressure regulators for manifold systems used inwelding, cutting and allied processes up to 30 MPa (300 bar)

5. EN ISO 10447:2015 Resistance welding - Testing of welds - Peel and chisel testing of resistance spotand projection welds (ISO 10447:2015)

6. EN ISO 14323:2015 Resistance welding - Destructive testing of welds - Specimen dimensions andprocedure for impact tensile shear test and cross-tension testing of resistancespot and embossed projection welds (ISO 14323:2015)

7. EN ISO 14373:2015 Resistance welding - Procedure for spot welding of uncoated and coated lowcarbon steels (ISO 14373:2015)

8. EN ISO 23277:2015 Non-destructive testing of welds - Penetrant testing - Acceptance levels9. EN ISO 23278:2015 Non-destructive testing of welds - Magnetic particle testing - Acceptance levels10. CEN ISO/TR 14745:2015 Welding - Post-weld heat treatment parameters for steels (ISO/TR 14745:2015)11. EN ISO 17658:2015 Welding - Imperfections in oxyfuel flame cuts, laser beam cuts and plasma cuts

- Terminology (ISO 17658:2002)12. EN 1559-4:2015 Founding - Technical conditions of delivery - Part 4: Additional requirements

for aluminium alloy castings

56

13. EN 1396:2015 Aluminium and aluminium alloys - Coil coated sheet and strip for generalapplications - Specifications

14. CEN/TR 16748:2014 Aluminium and aluminium alloys - Mechanical potential of Al-Si alloys forhigh pressure, low pressure and gravity die casting

15. EN 15703-2:2014 Copper and copper alloys - Determination of manganese content - Part 2: Flameatomic absorption spectrometric method (FAAS)

16. EN 15063-1:2014 Copper and copper alloys - Determination of main constituents and impuritiesby wavelength dispersive X-ray fluorescence spectrometry (XRF) - Part 1:Guidelines to the routine method

17. CEN/TS 15656:2015 Copper and copper alloys - Determination of phosphorus content -Spectrophotometric method

18. EN 1371-2:2015 Founding - Liquid penetrant testing - Part 2: Investment castings19. EN ISO 7441:2015 Corrosion of metals and alloys - Determination of bimetallic corrosion in

atmospheric exposure corrosion tests (ISO 7441:2015)20. EN ISO 4528:2015 Vitreous and porcelain enamel finishes - Guide to selection of test methods for

vitreous and porcelain enamelled areas of articles (ISO 4528:2015)21. EN ISO 7539-11:2014 Corrosion of metals and alloys - Stress corrosion testing - Part 11: Guidelines for

testing the resistance of metals and alloys to hydrogen embrittlement andhydrogen-assisted cracking (ISO 7539-11:2013)

22. EN ISO 7539-10:2014 Corrosion of metals and alloys - Stress corrosion testing - Part 10: Reverse U-bend method (ISO 7539-10:2013)

23. EN 10027-2:2015 Designation systems for steels - Part 2: Numerical system24. EN ISO 6892-3:2015 Metallic materials - Tensile testing - Part 3: Method of test at low temperature

(ISO 6892-3:2015)25. EN ISO 6508-1:2015 Metallic materials - Rockwell hardness test - Part 1: Test method26. EN ISO 6508-2:2015 Metallic materials - Rockwell hardness test - Part 2: Verification and calibration

of testing machines and indenters (ISO 6508-2:2015)27. EN ISO 6508-3:2015 Metallic materials - Rockwell hardness test - Part 3: Calibr. of reference blocks28. EN 10293:2015 Steel castings - Steel castings for general engineering uses29. ISO 22034-1:2007 Steel wire and wire products - Part 1: General test methods30. ISO 22034-2:2007 Steel wire and wire products - Part 2: Tolerances on wire dimensions31. ISO 13270:2013 Steel fibres for concrete - Definitions and specifications32. ISO 7989-1:2006 Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Part

1: General principles33. ISO 7989-2:2007 Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Part

2: Zinc or zinc-alloy coating34. ISO 404:2013 Steel and steel products - General technical delivery requirements35. ISO 10474:2013 Steel and steel products - Inspection documents36. ISO 6361-1:2011 Wrought aluminium and aluminium alloys - Sheets, strips and plates - Part 1:

Technical conditions for inspection and delivery37. ISO 6361-2:2014 Wrought aluminium and aluminium alloys - Sheets, strips and plates - Part 2:

Mechanical properties38. ISO 6361-3:2014 Wrought aluminium and aluminium alloys - Sheets, strips and plates - Part 3:

Strips: Tolerances on shape and dimensions39. ISO 6361-4:2014 Wrought aluminium and aluminium alloys - Sheets, strips and plates - Part 4:

Sheets and plates: Tolerances on shape and dimensions

57

40. ISO 6361-5:2011 Wrought aluminium and aluminium alloys - Sheets, strips and plates - Part 5:Chemical composition

41. ISO 6362-1:2012 Wrought aluminium and aluminium alloys - Extruded rods/bars, tubes andprofiles - Part 1: Technical conditions for inspection and delivery

42. ISO 6362-2:2014 Wrought aluminium and aluminium alloys - Extruded rods/bars, tubes andprofiles - Part 2: Mechanical properties

43. ISO 6362-3:2012 Wrought aluminium and aluminium alloys - Extruded rods/bars, tubes andprofiles - Part 3: Extruded rectangular bars - Tolerances on shape anddimensions

44. ISO 6362-4:2012 Wrought aluminium and aluminium alloys - Extruded rods/bars, tubes andprofiles - Part 4: Profiles - Tolerances on shape and dimensions

45. ISO 6362-5:2012 Wrought aluminium and aluminium alloys - Extruded rods/bars, tubes andprofiles - Part 5: Round, square and hexagonal bars - Tolerances on shape anddimensions

46. ISO 6362-6:2012 Wrought aluminium and aluminium alloys - Extruded rods/bars, tubes andprofiles - Part 6: Round, square, rectangular and hexagonal tubes - Toleranceson shape and dimensions

47. ISO 6362-7:2014 Wrought aluminium and aluminium alloys - Extruded rods/bars, tubes andprofiles - Part 7: Chemical composition

48. ISO 251:2012 Conveyor belts with textile carcass - Widths and lengths49. ISO 18573:2012 Conveyor belts - Test atmospheres and conditioning periods

Technical Committee No. 136“Sports, playground and other recreational equipment”, 48 standards


1. EN 12229:2014 Surfaces for sports areas - Procedure for the preparation of synthetic turf andneedle-punch test pieces

2. EN 13451-10:2014 Swimming pool equipment - Part 10: Additional specific safety requirementsand test methods for diving platforms, diving springboards and associatedequipment

3. EN 13451-11:2014 Swimming pool equipment - Part 11: Additional specific safety requirementsand test methods for moveable pool floors and moveable bulkheads

4. EN 13451-4:2014 Swimming pool equipment - Part 4: Additional specific safety requirementsand test methods for starting platforms

5. EN 13451-5:2014 Swimming pool equipment - Part 5: Additional specific safety requirementsand test methods for lane lines and dividing line

6. EN ISO 4210-1:2014 Cycles - Safety requirements for bicycles - Part 1: Terms and definitions (ISO4210-1:2014)

7. EN ISO 4210-2:2014 Cycles - Safety requirements for bicycles - Part 2: Requirements for city andtrekking, young adult, mountain and racing bicycles (ISO 4210-2:2014)

8. EN ISO 4210-3:2014 Cycles - Safety requirements for bicycles - Part 3: Common test methods9. EN ISO 4210-4:2014 Cycles - Safety requirements for bicycles - Part 4: Braking test methods (ISO

4210-4:2014)

58

10. EN ISO 4210-5:2014 Cycles - Safety requirements for bicycles - Part 5: Steering test methods (ISO4210-5:2014, Corrected version 2015-02-01)

11. EN ISO 4210-6:2014 Cycles - Safety requirements for bicycles - Part 6: Frame and fork test methods(ISO 4210-6:2014)

12. EN ISO 4210-7:2014 Cycles - Safety requirements for bicycles - Part 7: Wheels and rims test methods(ISO 4210-7:2014)

13. EN ISO 4210-8:2014 Cycles - Safety requirements for bicycles - Part 8: Pedal and drive system testmethods (ISO 4210-8:2014)

14. EN ISO 4210-9:2014 Cycles - Safety requirements for bicycles - Part 9: Saddles and seat-post testmethods (ISO 4210-9:2014)

15. EN ISO 8098:2014 Cycles - Safety requirements for bicycles for young children (ISO 8098:2014)16. EN 15306:2014 Surfaces for outdoor sports areas - Exposure of synthetic turf to simulated wear17. EN 1809:2014 Diving equipment - Buoyancy compensators - Functional and safety

requirements, test methods18. EN 564:2014 Mountaineering equipment - Accessory cord - Safety requirements & test meth19. EN 14468-1:2015 Table tennis - Part 1: Table tennis tables, functional and safety requirements,

test methods20. EN 14468-2:2015 Table tennis - Part 2: Posts for net assemblies - Requirements and test methods21. EN 1176-11:2014 Playground equipment and surfacing - Part 11: Additional specific safety

requirements and test methods for spatial network22. ISO 9838:2008 Alpine and touring ski-bindings - Test soles for ski-binding tests23. ISO 9523:2008 Touring ski-boots for adults - Interface with touring ski-bindings -

Requirements and test methods24. ISO 9465:2012 Alpine ski-bindings - Lateral release under impact loading - Test method25. ISO 9462:2014 Alpine ski-bindings - Requirements and test methods26. ISO 8364:2007 Alpine skis and bindings - Binding mounting area - Requirements and test

methods27. ISO 8061:2004 Alpine ski-bindings - Selection of release torque values28. ISO 7795:2011 Cross-country skis - Ski-bindingscrews - Test methods29. ISO 7794:2011 Cross-country skis - Ski-binding screws - Requirements30. ISO 7331:2011 Ski-poles for alpine skiing - Requirements and test methods31. ISO 6266:2013 Alpine skis - Determination of fatigue indexes -Cyclic loading test32. ISO 6265:2013 Alpine skis - Determination of deformation load and breaking load33. ISO 5902:2013 Alpine skis - Determination of elastic properties34. ISO 11087:2004 Alpine ski-bindings - Retention devices - Requirements and test methods35. ISO 10958-2:2004 Snowboards - Binding mounting area - Part 2: Requirements and test methods

for snowboards with inserts36. ISO 10228:2011 Cross-country skis - Binding mounting area - Requirements for test screws37. CEN/TR 16598:2014 Collection of rationales for EN 1176 - Requirements38. EN 14619:2015 Roller sports equipment - Kick scooters - Safety requirements and test methods39. EN 16630:2015 Permanently installed outdoor fitness equipment - Safety requirements and test

methods40. EN 957-6:2010+A1:2014 Stationary training equipment - Part 6: Treadmills, additional specific safety

requirements and test methods41. EN 13089:2011+A1:2015 Mountaineering equipment - Ice-tools - Safety requirements and test methods42. CEN/TS 16717:2015 Surface for sports areas - Method of test for the determination of shock

59

absorption, vertical deformation and energy restitution using the advancedartificial athlete

43. EN 13200-7:2014 Spectator facilities - Part 7: Entry and exit elements and routes44. EN 16581:2014 Conservation of Cultural Heritage - Surface protection for porous inorganic

materials - Laboratory test methods for the evaluation of the performance ofwater repellent products

45. CEN/TS 16163:2014 Conservation of Cultural Heritage - Guidelines and procedures for choosingappropriate lighting for indoor exhibitions

46. EN 16455:2014 Conservation of cultural heritage - Extraction and determination of soluble saltsin natural stone and related materials used in and from cultural heritage

47. EN 16515:2015 Conservation of Cultural Heritage - Guidelines to characterize natural stoneused in cultural heritage

48. EN 15999-1:2014 Conservation of cultural heritage - Guidelines for design of showcases forexhibition and preservation of objects - Part 1: General requirements

Technical Committee No. 138“Non destructive testing”, 6 standards


1. EN ISO 16946:2015 Non-destructive testing - Ultrasonic testing - Specification for step wedgecalibration block (ISO 16946:2015)

2. EN 1330-1:2014 Non destructive testing - Terminology - Part 1: List of general terms3. ISO 18490:2015 Non-destructive testing - Evaluation of vision acuity of NDT personnel4. ISO 10878:2013 Non-destructive testing - Infrared thermography - Vocabulary5. ISO 18249:2015 Non-destructive testing - Acoustic emission testing - Specific methodology and

general evaluation criteria for testing of fibre-reinforced polymers6. ISO 12715:2014 Non-destructive testing - Ultrasonic testing - Reference blocks and test

procedures for the characterization of contact probe sound beams

Technical Committee No. 140“In vitro diagnostic medical device”, 1 standard


7. ISO 15189:2012 Medical laboratories - Requirements for quality and competence

60

Technical Committee No. 144“Tractors and machinery for agriculture and forestry”, 5 standards


1. EN ISO 16119-4:2014 Agricultural and forestry machinery - Environmental requirements for sprayers- Part 4: Fixed and semi-mobile sprayers (ISO 16119-4:2014)

2. EN ISO 16122-4:2015 Agricultural and forestry machines - Inspection of sprayers in use - Part 4:Fixed and semi-mobile sprayers (ISO 16122-4:2015)

3. EN ISO 16122-3:2015 Agricultural and forestry machinery - Inspection of sprayers in use - Part 3:Sprayers for bush and tree crops (ISO 16122-3:2015)

4. EN ISO 16122-2:2015 Agricultural and forestry machinery - Inspection of sprayers in use - Part 2:Horizontal boom sprayers (ISO 16122-2:2015)

5. EN ISO 16122-1:2015 Agricultural and forestry machinery - Inspection of sprayers in use - Part 1:General (ISO 16122-1:2015)

Technical Committee No. 172“Pulp, paper and board”, 46 standards


1. EN ISO 12625-16:2015 Tissue paper and tissue products - Part 16: Determination of optical properties -Opacity (paper backing) - Diffuse reflectance method (ISO 12625-16:2015)

2. EN ISO 12625-15:2015 Tissue paper and tissue products - Part 15: Determination of optical properties -Measurement of brightness and colour with C/2° (indoor daylight) illuminant

3. EN ISO 12625-9:2015 Tissue paper and tissue products - Part 9: Determination of ball burst strength(ISO 12625-9:2015)

4. ISO 10716:1994 Paper and board - Determination of alkali reserve5. ISO 11476:2010 Paper and board - Determination of CIE whiteness, C/2 degrees (indoor

illumination conditions)6. ISO 11480:1997 Pulp, paper and board - Determination of total chlorine and organically bound

chlorine7. ISO 13542:2006 Paper and board - Specification for internal diameters of cores for reels8. ISO 14436:2010 Pulps - Standard tap water for drainability measurements - Conductivity 40

mS/m to 150 mS/m9. ISO 14487:1997 Pulps - Standard water for physical testing10. ISO 15360-1:2000 Recycled pulps - Estimation of Stickies and Plastics - Part 1: Visual method11. ISO 15360-2:2001 Recycled pulps - Estimation of Stickies and Plastics - Part 2: Image analysis

method12. ISO 15360-2:2001/Cor 1:2007 Recycled pulps - Estimation of Stickies and Plastics - Part 2: Image analysis

method13. ISO 15361:2000 Pulps - Determination of zero-span tensile strength, wet or dry14. ISO 1762 Paper, board and pulps - Determination of residue (ash) on ignition at 525

degrees C

61

15. ISO 17812:2007 Paper, board and pulps - Determination of total magnesium, total calcium, totalmanganese, total iron and total copper

16. ISO 2144:2015 Paper, board and pulps - Determination of residue (ash) on ignition at 900degrees C

17. ISO 22754:2008 Pulp and paper - Determination of the effective residual ink concentration(ERIC number) by infrared reflectance measurement

18. ISO 23713:2005 Pulps - Determination of fibre coarseness by automated optical analysis -Polarized light method

19. ISO 2469:2014 Paper, board and pulps - Measurement of diffuse radiance factor (diffusereflectance factor)

20. ISO 2471:2008 Paper and board - Determination of opacity (paper backing) - Diffusereflectance method

21. ISO 3260:2015 Pulps - Determination of chlorine consumption (Degree of delignification)22. ISO 3688:1999 Pulps - Preparation of laboratory sheets for the measurement of diffuse blue

reflectance factor (ISO brightness)23. ISO 5264-1:1979 Pulps - Laboratory beating - Part 1: Valley beater method24. ISO 5631-2:2014 Paper and board - Determination of colour by diffuse reflectance - Part 2:

Outdoor daylight conditions (D65/10 degrees)25. ISO 5631-3:2014 Paper and board - Determination of colour by diffuse reflectance - Part 3:

Indoor illumination conditions (D50/2 degrees)26. ISO 5647:1990 Paper and board - Determination of titanium dioxide content27. ISO 6587:1992 Paper, board and pulps - Determination of conductivity of aqueous extracts28. ISO 6588-1:2012 Paper, board and pulps - Determination of pH of aqueous extracts - Part 1: Cold

extraction29. ISO 6588-2:2012 Paper, board and pulps - Determination of pH of aqueous extracts - Part 2: Hot

extraction30. ISO 699:2015 Pulps - Determination of alkali resistance31. ISO 8254-3:2004 Paper and board - Measurement of specular gloss - Part 3: 20 degree gloss with

a converging beam, TAPPI method32. ISO 838:1974 Paper - Holes for general filing purposes - Specifications33. ISO 9184-1:1990 Paper, board and pulps - Fibre furnish analysis - Part 1: General method34. ISO 9184-2:1990 Paper, board and pulps - Fibre furnish analysis - Part 2: Staining guide35. ISO 9184-3:1990 Paper, board and pulps - Fibre furnish analysis - Part 3: Herzberg staining test36. ISO 9184-4:1990 Paper, board and pulps - Fibre furnish analysis - Part 4: Graff "C" staining test37. ISO 9184-5:1990 Paper, board and pulps - Fibre furnish analysis - Part 5: Lofton-Merritt staining

test (modification of Wisbar)38. ISO 9184-6:1994 Paper, board and pulps - Fibre furnish analysis - Part 6: Determination of fibre

coarseness39. ISO 9184-7:1994 Paper, board and pulps - Fibre furnish analysis - Part 7: Determination of

weight factor40. ISO 9197:2006 Paper, board and pulps - Determination of water-soluble chlorides41. ISO 12776:2008 Pallets - Slip sheets42. ISO 13194:2011 Box pallets - Principal requirements and test methods43. ISO 15629:2002 Pallets for materials handling - Quality of fasteners for assembly of new and

repair of used, flat, wooden pallets44. ISO 18333:2014 Pallets for materials handling - Quality of new wooden comp. for flat pallets

62

45. ISO 18334:2010 Pallets for materials handling - Quality of assembly of new wooden pallets46. ISO 6780:2003 Flat pallets for intercontinental materials handling - Principal dimensions and

tolerances

Technical Committee No. 175“Round and sawn timber”, 17 standards


1. CEN/TR 16816:2015 End use performance of wood products - Utilisation and improvement ofexisting methods to estimate service life

2. CEN/TS 12404:2015 Durability of wood and wood-based products - Assessment of the effectivenessof a masonry fungicide to prevent growth into wood of Dry Rot Serpulalacrymans (Schumacher ex Fries) S.F. Gray - Laboratory method

3. CEN/TR 12872:2014 Wood-based panels - Guidance on the use of load-bearing boards in floors,walls and roofs

4. EN 636:2012+A1:2015 Plywood - Specifications5. EN 13986:2004+A1:2015 Wood-based panels for use in construction - Characteristics, evaluation of

conformity and marking6. EN 1075:2014 Timber structures - Test methods - Joints made with punched metal plate

fasteners7. EN 1870-17:2012+A1:2015 Safety of woodworking machines - Circular sawing machines - Part 17: Manual

horizontal cutting cross-cut sawing machines with one saw unit (radial armsaws)

8. EN 12023:1996 Self-adhesive tapes - Measurement of water transmission in a warm humidatmosphere

9. EN 15307:2014 Adhesives for leather and footwear materials - Sole-upper bonds - Minimumstrength requirements

10. EN 1373:2015 Adhesives - Test method for adhesives for floor and wall coverings - Shear test11. EN 1372:2015 Adhesives - Test method for adhesives for floor and wall coverings - Peel test12. EN 15275:2015 Structural adhesives - Characterisation of anaerobic adhesives for co-axial

metallic assembly in building and civil engineering structures13. EN 1902:2015 Adhesives - Test method for adhesives for floor and wall coverings - Shear

creep test14. EN 1903:2015 Adhesives - Test method for adhesives for plastic or rubber floor coverings or

wall coverings - Determination of dimensional changes after accelerated ageing15. EN 15274:2015 General purpose adhesives for structural assembly - Requirements and test

methods16. CR 1472:1997 General guidance for the marking of gas appliances17. CEN/TR 1749:2014 European scheme for the classification of gas appliances according to the

method of evacuation of the combustion products (types)

63

Technical Committee No. 185“Fasteners, screws and auxiliary elements”, 5 standards


1. EN 14399-1:2015 High-strength structural bolting assemblies for preloading - Part 1: Generalrequirements

2. ISO 888:2012 Fasteners - Bolts, screws and studs - Nominal lengths and thread lengths3. ISO 1891:2009 Fasteners - Terminology4. ISO/TR 16224:2012 Technical aspects of nut design5. ISO 10509:2012 Hexagon flange head tapping screws

Technical Committee No. 205“Non-active medical devices”, 8 standards


1. EN ISO 11608-1:2015 Needle-based injection systems for medical use - Requirements and testmethods - Part 1: Needle-based injection systems (ISO 11608-1:2014)

2. EN ISO 11070:2014 Sterile single-use intravascular introducers, dilators and guidewires (ISO11070:2014)

3. EN 455-2:2015 Medical gloves for single use - Part 2: Requirements and testing for physicalproperties

4. EN 455-3:2015 Medical gloves for single use - Part 3: Requirements and testing for biologicalevaluation

5. EN ISO 7199:2014 Cardiovascular implants and artificial organs - Blood-gas exchangers(oxygenators) (ISO 7199:2009 + Amd 1:2012)

6. EN ISO 8871-2:2004/A1:2014 Elastomeric parts for parenterals and for devices for pharmaceutical use - Part2: Identification and characterization - Amendment 1 (ISO 8871-2:2003/Amd1:2005)

7. EN ISO 8871-5:2014 Elastomeric parts for parenterals and for devices for pharmaceutical use - Part5: Functional requirements and testing (ISO 8871-5:2005)

8. EN ISO 7439:2015 Copper-bearing contraceptive intrauterine devices - Requirements and tests(ISO 7439:2015)

64

Technical Committee No. 206“Biocompatibility of medical and dental materials and devices”,

12 standards


1. EN 13060:2014 Small steam sterilizers2. EN 14180:2014 Sterilizers for medical purposes - Low temperature steam and formaldehyde

sterilizers - Requirements and testing3. EN ISO 11140-1:2014 Sterilization of health care products - Chemical indicators - Part 1: General

requirements (ISO 11140-1:2014)4. EN ISO 10993-3:2014 Biological evaluation of medical devices - Part 3: Tests for genotoxicity,

carcinogenicity and reproductive toxicity (ISO 10993-3:2014)5. EN 13718-2:2015 Medical vehicles and their equipment - Air ambulances - Part 2: Operational

and technical requirements for air ambulances6. EN 14180:2014 Sterilizers for medical purposes - Low temperature steam and formaldehyde

sterilizers - Requirements and testing7. EN 1865-2:2010+A1:2015 Patient handling equipment used in road ambulances - Part 2: Power assisted

stretcher8. EN 1865-3:2012+A1:2015 Patient handling equipment used in road ambulances - Part 3: Heavy duty

stretcher9. EN 16442:2015 Controlled environment storage cabinet for processed thermolabile endoscopes10. EN ISO 11607-1:2009/A1:2014 Packaging for terminally sterilized medical devices - Part 1: Requirements for

materials, sterile barrier systems and packaging systems (ISO 11607-1:2006/Amd 1:2014)

11. EN ISO 11607-2:2006/A1:2014 Packaging for terminally sterilized medical devices - Part 2: Validationrequirements for forming, sealing and assembly processes (ISO 11607-2:2006/Amd 1:2014)

12. EN ISO 15883-1:2009/A1:2014 Washer-disinfectors - Part 1: General requirements, terms and definitions andtests (ISO 15883-1:2006/Amd 1:2014)

Technical Committee No. 211“Acoustics”, 8 standards


1. ISO 362-1:2015 Measurement of noise emitted by accelerating road vehicles - Engineeringmethod - Part 1: M and N categories

2. ISO 17534-1:2015 Acoustics - Software for the calculation of sound outdoors - Part 1: Qualityrequirements and quality assurance

3. ISO/TR 17534-2:2014 Acoustics - Software for the calculation of sound outdoors - Part 2: Generalrecommendations for test cases and quality assurance interface

4. ISO/TR 17534-3:2015 Acoustics - Software for the calculation of sound outdoors - Part 3:Recommendations for quality assured implementation of ISO 9613-2 in

65

software according to ISO 17534-15. ISO 12999-1:2014 Acoustics - Determination and application of measurement uncertainties in

building acoustics - Part 1: Sound insulation6. ISO 1683:2015 Acoustics - Preferred reference values for acoustical and vibratory levels7. ISO 9277:2010 Determination of the specific surface area of solids by gas adsorption - BET

method8. ISO 6395:2008 Earth-moving machinery - Determination of sound power level - Dynamic test

conditions

Technical Committee No. 215“Respiratory and anaesthetic equipment”, 8 standards


1. EN ISO 5367:2014 Anaesthetic and respiratory equipment - Breathing sets and connectors (ISO5367:2014)

2. EN ISO 5356-1:2015 Anaesthetic and respiratory equipment - Conical connectors - Part 1: Cones andsockets (ISO 5356-1:2015)

3. EN ISO 5359:2014 Anaesthetic and respiratory equipment - Low-pressure hose assemblies for usewith medical gases (ISO 5359:2014)

4. EN ISO 80601-2-69:2014 Medical electrical equipment - Part 2-69: Particular requirements for basicsafety and essential performance of oxygen concentrator equipment

5. EN ISO 8836:2014 Suction catheters for use in the respiratory tract (ISO 8836:2014)6. EN ISO 18082:2014 Anaesthetic and respiratory equipment - Dimensions of non-interchangeable

screw-threaded (NIST) low-pressure connectors for medical gases7. EN ISO 11990-1:2014 Lasers and laser-related equipment - Determination of laser resistance of

tracheal tubes - Part 1: Tracheal tube shaft (ISO 11990-1:2011)8. EN ISO 11990-2:2014 Lasers and laser-related equipment - Determination of laser resistance of

tracheal tubes - Part 2: Tracheal tube cuffs (ISO 11990-2:2010)

Technical Committee No. 218“Rubber and plastics hoses and piping”, 61 standards


1. EN ISO 8330:2014 Rubber and plastics hoses and hose assemblies - Vocabulary (ISO 8330:2014)2. EN 13765:2010+A1:2015 Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the

transfer of hydrocarbons, solvents and chemicals - Specification3. ISO 4647:2010 Rubber, vulcanized - Determinat. of static adhesion to textile cord - H-pull test4. ISO 3303-1:2012 Rubber- or plastics-coated fabrics - Determination of bursting strength - Part 1:

Steel-ball method5. ISO 3303-2:2012 Rubber- or plastics-coated fabrics - Determination of bursting strength - Part 2:

Hydraulic method

66

6. EN ISO 8029:2014 Plastics hose - General-purpose collapsible water hose, textile-reinforced -Specification (ISO 8029:2014)

7. ISO 2951:2012 Rubber, vulcanized or thermoplastic - Determination of insulation resistance8. ISO 2921:2011 Rubber, vulcanized - Determination of low-temperature retraction (TR test)9. ISO 2878:2011 Rubber, vulcanized or thermoplastic - Antistatic and conductive products -

Determination of electrical resistance10. ISO 2782-1:2012 Rubber, vulcanized or thermoplastic - Determination of permeability to gases -

Part 1: Differential-pressure methods11. ISO 2782-2:2012 Rubber, vulcanized or thermoplastic - Determination of permeability to gases -

Part 2: Equal-pressure method12. ISO 2302:2014 Isobutene-isoprene rubber (IIR) - Evaluation procedure13. ISO 2000:2014 Rubber, raw natural - Guidelines for the specification of technically specified

rubber (TSR)14. ISO 976:2013 Rubber/ plastics - Polymer dispersions and rubber latices - Determination of pH15. ISO 815-1:2014 Rubber, vulcanized or thermoplastic -Determination of compression set - Part 1:

At ambient or elevated temperatures16. ISO 815-2:2014 Rubber, vulcanized or thermoplastic - Determination of compression set - Part

2: At low temperatures17. ISO 814:2011 Rubber, vulcanized or thermoplastic - Determination of adhesion to metal -

Two-plate method18. ISO 813:2010 Rubber, vulcanized or thermoplastic - Determination of adhesion to a rigid

substrate - 90 degree peel method19. ISO 706:2004 Rubber latex - Determination of coagulum content (sieve residue)20. ISO 35:2004 Natural rubber latex concentrate - Determination of mechanical stability21. ISO 2930:2009 Rubber, raw natural - Determination of plasticity retention index (PRI)22. ISO 249:2014 Rubber, raw natural - Determination of dirt content23. ISO 248-1:2011 Rubber, raw - Determination of volatile-matter content - Part 1: Hot-mill

method and oven method24. ISO 248-2:2012 Rubber, raw -Determination of volatile-matter content - Part 2:

Thermogravimetric methods using an automatic analyser with an infrareddrying unit

25. ISO 2476:2014 Butadiene rubber (BR) - Solution-polymerized types - Evaluation procedures26. ISO 2475:2011 Chloroprene rubber (CR) - General-purpose types - Evaluation procedure27. ISO 2393:2014 Rubber test mixes - Preparation, mixing and vulcanization - Equipment and

procedures28. ISO 2322:2014 Styrene-butadiene rubber (SBR) - Emulsion- and solution-polymerized types -

Evaluation procedures29. ISO 2303:2011 Isoprene rubber (IR) - Non-oil-extended, solution-polymerized types -

Evaluation procedures30. ISO 2285:2013 Rubber, vulcanized or thermoplastic - Determination of tension set under

constant elongation, and of tension set, elongation and creep under constanttensile load

31. ISO 2230:2002 Rubber products - Guidelines for storage32. ISO 2007:2007 Rubber, unvulcanized - Determination of plasticity - Rapid-plastimeter method33. ISO 2005:2014 Rubber latex, natural, concentrate - Determination of sludge content34. ISO 2004:2010 Natural rubber latex concentrate - Centrifuged or creamed, ammonia-preserved

67

types - Specifications35. ISO 1853:2011 Conducting and dissipative rubbers, vulcanized or thermoplastic -

Measurement of resistivity36. ISO 1827:2011 Rubber, vulcanized or thermoplastic - Determination of shear modulus and

adhesion to rigid plates - Quadruple-shear methods37. ISO 1817:2015 Rubber, vulcanized or thermoplastic - Determination of the effect of liquids38. ISO 1795:2007 Rubber, raw natural and raw synthetic - Sampling and further preparative

procedures39. ISO 1656:2014 Rubber, raw natural, and rubber latex, natural - Determ. of nitrogen content40. ISO 1652:2011 Rubber latex - Determination of apparent viscosity by the Brookfield test

method41. ISO 1432:2013 Rubber, vulcanized or thermoplastic - Determination of low-temperature

stiffening (Gehman test)42. ISO 1431-1:2012 Rubber, vulcanized or thermoplastic - Resistance to ozone cracking - Part 1:

Static and dynamic strain testing43. ISO 1409:2006 Plastics/rubber - Polymer dispersions and rubber latices (natural and synthetic)

- Determination of surface tension by the ring method44. ISO 1407:2011 Rubber - Determination of solvent extract45. ISO 127:2012 Rubber, natural latex concentrate - Determination of KOH number46. ISO 126:2005 Natural rubber latex concentrate - Determination of dry rubber content47. ISO 13756:2015 Jewellery - Determination of silver in silver jewellery alloys - Volumetric

(potentiometric) method using sodium chloride or potassium chloride48. ISO 125:2011 Natural rubber latex concentrate - Determination of alkalinity49. ISO 124:2014 Latex, rubber - Determination of total solids content50. EN ISO 6808:2014 Plastics hoses and hose assemblies for suction and low-pressure discharge of

petroleum liquids - Specification (ISO 6808:2014)51. EN 853:2015 Rubber hoses and hose assemblies - Wire braid reinforced hydraulic type -

Specification52. EN 854:2015 Rubber hoses and hose assemblies - Textile reinforced hydraulic type -

Specification53. EN 856:2015 Rubber hoses and hose assemblies - Rubber-covered spiral wire reinforced

hydraulic type - Specification54. EN 857:2015 Rubber hoses and hose assemblies - Wire braid reinforced compact type for

hydraulic applications - Specification55. CEN/TS 16650:2014 Specification for hose couplings for petrol, oil and lubricants - High pressure

couplings56. EN ISO 3994:2014 Plastics hoses - Helical-thermoplastic-reinforced thermoplastics hoses for

suction and discharge of aqueous materials - Specification (ISO 3994:2014)57. EN ISO 8331:2014 Rubber and plastics hoses and hose assemblies - Guidelines for selection,

storage, use and maintenance (ISO 8331:2014)58. EN ISO 8030:2014 Rubber and plastics hoses - Method of test for flammability (ISO 8030:2014)59. EN ISO 3949:2014 Plastics hoses and hose assemblies - Textile-reinforced types for hydraulic

applications - Specification (ISO 3949:2009)60. EN ISO 6806:2014 Rubber hoses and hose assemblies for use in oil burners - Specification61. EN ISO 28017:2011/A1:2015 Rubber hoses and hose assemblies, wire or textile reinforced, for dredging

applications - Specification - Amendment 1 (ISO 28017:2011/Amd 1:2015)

68

Technical Committee No. 224“Information processing systems”, 34 standards


1. EN 419212-1:2014 Application Interface for smart cards used as Secure Signature Creation Devices- Part 1: Basic services

2. EN 419212-2:2014 Application Interface for smart cards used as Secure Signature Creation Devices- Part 2: Additional services

3. EN 1545-1:2015 Identification card systems - Surface transport applications - Part 1: Elementarydata types, general code lists and general data elements

4. EN 1545-2:2015 Identification card systems - Surface transport applications - Part 2: Transportand travel payment related data elements and code lists

5. CEN/TS 419261:2015 Security require.for trustworthy systems managing certificates and time-stamps6. CEN ISO/TR 17424:2015 Intelligent transport systems - Cooperative systems - State of the art of Local

Dynamic Maps concepts (ISO/TR 17424:2015)7. CEN ISO/TS 18234-9:2013 Intelligent transport systems - Traffic and travel information via transport

protocol experts group, generation 1 (TPEG1) binary data format - Part 9:Traffic event compact (TPEG1-TEC) (ISO/TS 18234-9:2013)

8. CEN/TS 16702-2:2015 Electronic fee collection - Secure monitoring for autonomous toll systems - Part2: Trusted recorder

9. CEN ISO/TS 18750:2015 Intelligent transport systems - Cooperative systems - Definition of a globalconcept for Local Dynamic Maps (ISO/TS 18750:2015)

10. CEN ISO/TS 19321:2015 Intelligent transport systems - Cooperative ITS - Dictionary of in-vehicleinformation (IVI) data structure (ISO/TS 19321:2015)

11. CEN/TS 16794-1:2015 Public transport - Communication between contactless readers and fare media -Part 1: Implementation requirements for ISO/IEC 14443

12. CEN/TS 16794-2:2015 Public transport - Communication between contactless readers and fare media -Part 2: Test plan for ISO/IEC 14443

13. EN 16072:2015 Intelligent transport systems - ESafety - Pan-European eCall operatingrequirements

14. EN 15722:2015 Intelligent transport systems - ESafety - ECall minimum set of data15. EN 16062:2015 Intelligent transport systems - ESafety - eCall high level application

requirements (HLAP) using GSM/UMTS circuit switched networks16. ISO 10159:2011 Health informatics - Messages & comm.. - Web access reference manifest17. ISO 11073-90101:2008 Health informatics - Point-of-care medical device communication - Part 90101:

Analytical instruments - Point-of-care test18. ISO 11073-91064:2009 Health informatics - Standard communication protocol - Part 91064: Computer-

assisted electrocardiography19. ISO 17090-1:2013 Health informatics - Public key infrastructure - Part 1: Overview of digital

certificate services20. ISO 17090-2:2008 Health informatics - Public key infrastructure - Part 2: Certificate profile21. ISO 17090-3:2008 Health informatics - Public key infrastructure - Part 3: Policy management of

certification authority22. ISO 17090-4:2014 Health informatics - Public key infrastructure - Part 4: Digital Signatures for

healthcare documents

69

23. ISO 17115:2007 Health informatics - Vocabulary for terminological systems24. ISO 17432:2004 Health informatics - Messages and communication - Web access to DICOM

persistent objects25. ISO 18232:2006 Health Informatics - Messages and communication - Format of length limited

globally unique string identifiers26. ISO 18308:2011 Health informatics - Requirements for an electronic health record architecture27. ISO 20301:2014 Health informatics - Health cards - General characteristics28. ISO 20302:2014 Health informatics - Health cards - Numbering system and registration

procedure for issuer identifiers29. ISO 21090:2011 Health informatics - Harmonized data types for information interchange30. ISO 21091:2013 Health informatics - Directory services for healthcare providers, subjects of care

and other entities31. ISO 21667:2010 Health informatics - Health indicators conceptual framework32. ISO 22077-1:2015 Health informatics - Medical waveform format - Part 1: Encoding rules33. ISO 22857:2013 Health informatics - Guidelines on data protection to facilitate trans-border

flows of personal health data34. ISO 25720:2009 Health informatics - Genomic Sequence Variation Markup Language (GSVML)

Technical Committee No. 230“Water, air and soil quality”, 117 standards


1. CEN/TR 16788:2014 Characterization of sludges - Guideline of good practice for thermal processes2. EN 1017:2014 Chemicals used for treatment of water intended for human consumption - Half-

burnt dolomite3. EN 1018:2013+A1:2015 Chemicals used for treatment of water intended for human consumption -

Calcium carbonate4. EN 12050-1:2015 Wastewater lifting plants for buildings and sites - Part 1: Lifting plants for

wastewater containing faecal matter5. EN 12050-2:2015 Wastewater lifting plants for buildings and sites - Part 2: Lifting plants for

faecal-free wastewater6. EN 12050-3:2015 Wastewater lifting plants for buildings and sites - Part 3: Lifting plants for

limited applications7. EN 12050-4:2015 Wastewater lifting plants for buildings and sites - Part 4: Non-return valves for

faecal-free wastewater and wastewater containing faecal matter8. EN 12518:2014 Chemicals used for treatment of water intended for human consumption -

High-calcium lime9. EN 12566-3:2005+A2:2013 Small wastewater treatment systems for up to 50 PT - Part 3: Packaged and/or

site assembled domestic wastewater treatment plants10. EN 12876:2015 Chemicals used for treatment of water intended for hum. consump. - Oxygen11. EN 12926:2015 Chemicals used for treatment of water intended for human consumption -

Sodium peroxodisulfate12. EN 13071-2:2008+A1:2013 Stationary waste containers up to 5 000 l, top lifted and bottom emptied - Part 2:

Additional requirements for underground or partly underground systems

70

13. EN 13176:2015 Chemicals used for treatment of water intended for human consumption -Ethanol

14. EN 13194:2015 Chemicals used for treatment of water intended for human consumption -Acetic Acid

15. EN 13205-1:2014 Workplace exposure - Assessment of sampler performance for measurement ofairborne particle concentrations - Part 1: General requirements

16. EN 13205-2:2014 Workplace exposure - Assessment of sampler performance for measurement ofairborne particle concentrations - Part 2: Laboratory performance test based ondetermination of sampling efficiency

17. CEN/TR 13205-3:2014 Workplace exposure - Assessment of sampler performance for measurement ofairborne particle concentrations - Part 3: Analysis of sampling efficiency data

18. EN 13205-4:2014 Workplace exposure - Assessment of sampler performance for measurement ofairborne particle concentrations - Part 4: Laboratory performance test based oncomparison of concentrations

19. EN 13205-5:2014 Workplace exposure - Assessment of sampler performance for measurement ofairborne particle concentrations - Part 5: Aerosol sampler performance test andsampler comparison carried out at workplaces

20. EN 13205-6:2014 Workplace exposure - Assessment of sampler performance for measurement ofairborne particle concentrations - Part 6: Transport and handling tests

21. CEN/TS 13649:2014 Stationary source emissions - Determination of the mass concentration ofindividual gaseous organic compounds - Sorptive sampling method followedby solvent extraction or thermal desorption

22. EN 13946:2014 Water quality - Guidance for the routine sampling and preparation of benthicdiatoms from rivers and lakes

23. EN 14181:2014 Stationary source emissions - Quality assurance of automated measuringsystems

24. EN 14184:2014 Water quality - Guidance for the surveying of aquatic macrophytes in runningwaters

25. EN 14407:2014 Water quality - Guidance for the identification and enumeration of benthicdiatom samples from rivers and lakes

26. EN 14718:2014 Influence of organic materials on water intended for human consumption -Determination of the chlorine demand - Test method

27. EN 15030:2012+A1:2015 Chemicals used for treatment of water intended for human consumption -Silver salts for intermittent use

28. EN 15039:2014 Chemicals used for treatment of water intended for human consumption -Antiscalants for membranes - Polycarboxilic acids and salts

29. EN 15040:2014 Chemicals used for treatment of water intended for human consumption -Antiscalants for membranes - Phosphonic acids and salts

30. EN 15041:2014 Chemicals used for treatment of water intended for human consumption -Antiscalants for membranes - Polyphosphates

31. EN 15074:2014 Chemicals used for treatment of swimming pool water - Ozone32. EN 15362:2014 Chemicals used for treatment of swimming pool water - Sodium carbonate33. EN 15513:2014 Chemicals used for treatment of swimming pool water - Carbon dioxide34. ISO 17378-2:2014 Water quality - Determination of arsenic and antimony - Part 2: Method using

hydride generation atomic absorption spectrometry (HG-AAS)35. EN ISO 14644-8:2013 Cleanrooms and associated controlled environments - Part 8: Classification of

71

air cleanliness by chemical concentration (ACC) (ISO 14644-8:2013)36. EN ISO 17994:2014 Water quality - Requirements for the comparison of the relative recovery of

microorganisms by two quantitative methods (ISO 17994:2014)37. ISO/TS 17379-2:2013 Water quality - Determination of selenium - Part 2: Method using hydride

generation atomic absorption spectrometry (HG-AAS)38. ISO 9698:2010 Water quality - Determination of tritium activity concentration - Liquid

scintillation counting method39. ISO 9697:2015 Water quality - Gross beta activity in non-saline water - Test method using

thick source40. ISO 9696:2007 Water quality - Measurement of gross alpha activity in non-saline water - Thick

source method41. EN ISO 9308-2:2014 Water quality - Enumeration of Escherichia coli and coliform bacteria - Part 2:

Most probable number method (ISO 9308-2:2012)42. ISO 8672:2014 Air quality - Determination of the number concentration of airborne inorganic

fibres by phase contrast optical microscopy - Membrane filter method43. ISO 14442:2006 Water quality - Guidelines for algal growth inhibition tests with poorly soluble

materials, volatile compounds, metals and waste water44. ISO 10703:2007 Water quality - Determination of the activity concentration of radionuclides -

Method by high resolution gamma-ray spectrometry (ISO 10703:2007)45. EN 16370:2013 Chemicals used for treatment of water intended for human consumption -

Sodium chloride for on site electrochlorination using membrane cells46. EN 1487:2014 Building valves - Hydraulic safety groups - Tests and requirements47. EN 16421:2014 Influence of materials on water for human consumption - Enhancement of

microbial growth (EMG)48. EN 15768:2015 Influence of materials on water intended for human consumption - GC-MS

identification of water leachable organic substances49. EN 16070:2014 Products used for treatment of water intended for human consumption -

Natural zeolite50. EN 15514:2014 Chemicals used for treatment of swimming pool water - Hydrochloric acid51. EN 1197:2014 Chemicals used for treatment of water intended for human consumption -

Monozinc phosphate solution52. EN 15363:2014 Chemicals used for treatment of swimming pool water - Chlorine53. EN 1113:2015 Sanitary tapware - Shower hoses for sanitary tapware for water supply systems

of type 1 and type 2 - General technical specification54. EN 12932:2015 Chemicals used for treatment of water intended for human consumption -

Chemicals for emergency use - Sodium dichloroisocyanurate, dihydrate55. EN 12933:2015 Chemicals used for treatment of water intended for human consumption -

Chemicals for emergency use - Trichloroisocyanuric acid56. EN 12931:2015 Chemicals used for treatment of water intended for human consumption -

Chemicals for emergency use - Sodium dichloroisocyanurate, anhydrous57. EN 13176:2015 Chemicals used for treatment of water intended for human consumption -

Ethanol58. EN 12876:2015 Chemicals used for treatment of water intended for human consumption –

Oxygen59. EN 14369:2015 Products used for treatment of water intended for human consumption - Iron-

coated granular activated alumina

72

60. EN 14368:2015 Products used for treatment of water intended for human consumption -Manganese dioxide coated limestone

61. EN 16146:2012+A1:2014 Sanitary tapware - Extractable shower hoses for sanitary tapware for supplysystems type 1 and type 2 - General technical specification

62. EN 1124-1:1999/A1:2004 Pipes and fittings of longitudinally welded stainless steel pipes with spigot andsocket for waste water systems - Part 1: Requirements, testing, quality control

63. EN 16506:2014 Systems for renovation of drains and sewers - Lining with a rigidly anchoredplastics inner layer (RAPL)

64. EN 12566-6:2013 Small wastewater treatment systems for up to 50 PT - Part 6: Prefabricatedtreatment units for septic tank effluent

65. EN 16397-1:2014 Flexible couplings - Part 1: Performance requirements66. EN 1253-1:2015 Gullies for buildings - Part 1: Trapped floor gullies with a depth water seal of at

least 50 mm67. EN 1253-2:2015 Gullies for buildings - Part 2: Roof drains and floor gullies without trap68. EN 295-1:2013 Vitrified clay pipe systems for drains and sewers - Part 1: Requirements for

pipes, fittings and joints69. EN 295-2:2013 Vitrified clay pipe systems for drains and sewers - Part 2: Evaluation of

conformity and sampling70. EN 295-4:2013 Vitrified clay pipe systems for drains and sewers - Part 4: Requirements for

adaptors, connectors and flexible couplings71. EN 295-5:2013 Vitrified clay pipe systems for drains and sewers - Part 5: Requirements for

perforated pipes and fittings72. EN 295-6:2013 Vitrified clay pipes systems for drain and sewers - Part 6: Requirements for

components of manholes and inspection chambers73. EN 295-7:2013 Vitrified clay pipe systems for drains and sewers - Part 7: Requirements for

pipes and joints for pipe jacking74. EN 14654-2:2013 Management and control of operational activities in drain and sewer systems

outside buildings - Part 2: Rehabilitation75. EN 16323:2014 Glossary of wastewater engineering terms76. EN 16397-2:2014 Flexible couplings - Part 2: Characteristics and testing for metal banded flexible

couplings, adaptors and bushes77. EN 1124-4:2013 Pipes and fittings of longitudinally welded stainless steel pipes with spigot and

socket for wastewater systems - Part 4: Components for vacuum drainagesystems and for drainage systems on ships

78. EN 14654-1:2014 Management and control of operational activities in drain and sewer systemsoutside buildings - Part 1: Cleaning

79. EN 1124-2:2014 Pipes and fittings of longitudinally welded stainless steel pipes with spigot andsocket for waste water systems - Part 2: System S, forms and dimensions

80. CEN/TR 16626:2014 Vitrified clay pipe systems for drains and sewers - Guidance for voluntarythird-party certification procedures

81. EN ISO 10121-1:2014 Test method for assessing the performance of gas-phase air cleaning media anddevices for general ventilation - Part 1: Gas-phase air cleaning media

82. EN ISO 10121-2:2013 Test methods for assessing the performance of gas-phase air cleaning mediaand devices for general ventilation - Part 2: Gas-phase air cleaning devices(GPACD) (ISO 10121-2:2013)

83. EN ISO 29462:2013 Field testing of general ventilation filtration devices and systems for in situ

73

removal efficiency by particle size and resistance to airflow (ISO 29462:2013)84. EN ISO 29461-1:2013 Air intake filter systems for rotary machinery - Test methods - Part 1: Static

filter elements (ISO 29461-1:2013)85. EN ISO 15957:2015 Test dusts for evaluating air cleaning equipment (ISO 15957:2015)86. CEN/TS 16692:2015 Water quality - Determination of tributyltin (TBT) in whole water samples -

Method using solid phase extraction (SPE) with SPE disks and gaschromatography with triple quadrupole mass spectrometry

87. EN ISO 12010:2014 Water quality - Determination of short-chain polychlorinated alkanes (SCCPs)in water - Method using gas chromatography-mass spectrometry (GC-MS) andnegative-ion chemical ionization (NCI) (ISO 12010:2012)

88. EN 15910:2014 Water quality - Guidance on the estimation of fish abundance with mobilehydroacoustic methods

89. EN 16164:2013 Water quality - Guidance standard for designing and selecting taxonomic keys90. EN 13946:2014 Water quality - Guidance for the routine sampling and preparation of benthic

diatoms from rivers and lakes91. EN 16479:2014 Water quality - Performance requirements and conformity test procedures for

water monitoring equipment - Automated sampling devices (samplers) forwater and waste water

92. EN ISO 27108:2013 Water quality - Determination of selected plant treatment agents and biocideproducts - Method using solid-phase microextraction (SPME) followed by gaschromatography-mass spectrometry (GC-MS) (ISO 27108:2010)

93. EN 16493:2014 Water quality - Nomenclatural requirements for the recording of biodiversitydata, taxonomic checklists and keys

94. EN 16503:2014 Water quality - Guidance standard on assessing the hydromorphologicalfeatures of transitional and coastal waters

95. EN ISO 11206:2013 Water quality - Determination of dissolved bromate - Method using ionchromatography (IC) and post column reaction (PCR) (ISO 11206:2011)

96. EN ISO 14644-10:2013 Cleanrooms and associated controlled environments - Part 10: Classification ofsurface cleanliness by chemical concentration (ISO 14644-10:2013)

97. EN 16413:2014 Ambient air - Biomonitoring with lichens - Assessing epiphytic lichen diversity98. EN 16414:2014 Ambient air - Biomonitoring with mosses - Accumulation of atmospheric con-

taminants in mosses collected in situ: from the collection to the prep.of samples99. CEN/TS 1948-5:2015 Stationary source emissions - Determination of the mass concentration of

PCDDs/PCDFs and dioxin-like PCBs - Part 5: Long-term sampling ofPCDDs/PCDFs and PCBs

100. CEN/TS 16645:2014 Ambient air - Method for the measurement of benz[a]anthracene,benzo[b]fluoranthene, benzo[j]fluoranthene, benzo[k]fluoranthene,dibenz[a,h]anthracene, indeno[1,2,3-cd]pyrene and benzo[ghi]perylene

101. EN ISO 16000-32:2014 Indoor air - Part 32: Investigation of buildings for the occurrence of pollutants102. EN ISO 16000-19:2014 Indoor air - Part 19: Sampling strategy for moulds (ISO 16000-19:2012)103. EN 14212:2012/AC:2014 Ambient air - Standard method for the measurement of the concentration of

sulphur dioxide by ultraviolet fluorescence104. EN 16457:2014 Characterization of waste - Framework for the preparation and application of a

testing programme - Objectives, planning and report105. CEN/TS 16675:2014 Characterisation of waste - Test methods for the determination of the

monolithic status of waste

74

106. EN 16377:2013 Characterization of waste - Determination of brominated flame retardants(BFR) in solid waste

107. EN 16123:2013 Characterization of waste - Guidance on selection and application of screeningmethods

108. CEN/TS 16023:2013 Characterization of waste - Determination of gross calorific value andcalculation of net calorific value

109. EN 16424:2014 Characterization of waste - Screening methods for the element composition byportable X-ray fluorescence instruments

110. EN 14429:2015 Characterization of waste - Leaching behaviour test - Influence of pH onleaching with initial acid/base addition

111. EN 14997:2015 Characterization of waste - Leaching behaviour test - Influence of pH onleaching with continuous pH control

112. EN 15863:2015 Characterization of waste - Leaching behaviour test for basic characterization -Dynamic monolithic leaching test with periodic leachant renewal, under fixedconditions

113. CEN/TS 16660:2015 Characterization of waste - Leaching behaviour test - Determination of thereducing character and the reducing capacity

114. EN 15002:2015 Characterization of waste - Preparation of test portions from the laboratorysample

115. CEN/TR 16456:2013 Characterization of sludges - Good practice of sludge dewatering116. CEN/TR 16394:2014 Characterization of sludges - Protocol for preparing synthetic suspensions117. CEN/TR 16394:2014/AC:2015 Characterization of sludges - Protocol for preparing synthetic suspensions

Technical Committee No. 248“Textiles and textile products”, 28 standards


1. EN ISO 11092:2014 Textiles - Physiological effects - Measurement of thermal and water-vapourresistance under steady-state conditions (sweating guarded-hotplate test)

2. EN ISO 105-B01:2014 Textiles - Tests for colour fastness - Part B01: Colour fastness to light: Daylight3. EN ISO 13427:2014 Geosynthetics - Abrasion damage simulation (sliding block test)4. EN 14682:2014 Safety of children's clothing - Cords and drawstrings on children's clothing5. ISO/TS 13434:2008 Geosynthetics - Guidelines for the assessment of durability6. CEN/TS 14417:2014 Geosynthetic barriers - Test method for the determination of the influence of

wetting-drying cycles on the permeability of clay geosynthetic barriers7. CEN/TS 14418:2014 Geosynthetic Barriers - Test method for the determination of the influence of

freezing-thawing cycles on the permeability of clay geosynthetic barriers8. EN 13249:2014+A1:2015 Geotextiles and geotextile-related products - Characteristics required for use in

the construction of roads and other trafficked areas (excluding railways andasphalt inclusion)

9. EN 13250:2014+A1:2015 Geotextiles and geotextile-related products - Characteristics required for use inthe construction of railways

10. EN 13251:2014+A1:2015 Geotextiles and geotextile-related products - Characteristics required for use in

75

earthworks, foundations and retaining structures11. EN 13252:2014+A1:2015 Geotextiles and geotextile-related products - Characteristics required for use in

drainage systems12. EN 13253:2014+A1:2015 Geotextiles and geotextile-related products - Characteristics required for use in

erosion control works (coastal protection, bank revetments)13. EN 13254:2014+A1:2015 Geotextiles and geotextile-related products - Characteristics required for use in

the construction of reservoirs and dams14. EN 13255:2014+A1:2015 Geotextiles and geotextile-related products - Characteristics required for use in

the construction of canals15. EN 13256:2014+A1:2015 Geotextiles and geotextile-related products - Characteristics required for use in

the construction of tunnels and underground structures16. EN 13257:2014+A1:2015 Geotextiles and geotextile-related products - Characteristics required for use in

solid waste disposals17. EN 13265:2014+A1:2015 Geotextiles and geotextile-related products - Characteristics required for use in

liquid waste containment projects18. EN 14533:2015 Textiles and textile products - Burning behaviour of bedding items -

Classification scheme19. EN ISO 14389:2014 Textiles - Determination of the phthalate content - Tetrahydrofuran method20. EN ISO 105-B02:2014 Textiles - Tests for colour fastness - Part B02: Colour fastness to artificial light:

Xenon arc fading lamp test (ISO 105-B02:2014)21. ISO 1136:2015 Wool - Determination of mean diameter of fibres - Air permeability method22. EN ISO 6938:2014 Textiles - Natural fibres - Generic names and definitions (ISO 6938:2012)23. ISO 2403:2014 Textiles - Cotton fibres - Determination of micronaire value24. CEN/TR 16792:2014 Safety of children's clothing - Recommendations for the design and

manufacture of children's clothing - Mechanical safety25. EN ISO 12945-3:2014 Textiles - Determination of the fabric propensity to surface pilling, fuzzing or

matting - Part 3: Random tumble pilling method (ISO 12945-3:2014)26. EN ISO 16373-3:2014 Textiles - Dyestuffs - Part 3: Method for determination of certain carcinogenic

dyestuffs (method using triethylamine/methanol) (ISO 16373-3:2014)27. EN ISO 18103:2015 Superfine woven wool fabric labelling - Requirements for Super S code

definition (ISO 18103:2015)28. EN 16653:2015 Rubber or plastics-coated fabrics - Determination of stitch tear resistance (using

a needle) - Test method

Technical Committee No. 256“Railway applications”, 7 standards


1. EN 16185-1:2014 Railway applications - Braking systems of multiple unit trains - Part 1:Requirements and definitions

2. EN 16185-2:2014 Railway applications - Braking systems of multiple unit trains - Part 2: Testmethods

3. EN 16186-1:2014 Railway applications - Driver's cab - Part 1: Anthropometric data and visibility4. EN 16494:2015 Railway applications - Requirements for ERTMS Trackside Boards

76

5. EN 16273:2014 Railway applications - Track - Forged rail transitions6. EN 14752:2015 Railway applications - Body side entrance systems for rolling stock7. EN 12663-1:2010+A1:2014 Railway applications - Structural requirements of railway vehicle bodies - Part

1: Locomotives and passenger rolling stock (and alternative method for freightwagons)

Technical Committee No. 269“Heating boilers, gas cylinders and shell and water tube boilers”,

45 standards


1. EN 26:2015 Gas-fired instantaneous water heaters for the production of domestic hot water2. EN 89:2015 Gas-fired storage water heaters for the production of domestic hot water3. EN 764-4:2014 Pressure equipment - Part 4: Establishment of technical delivery conditions for

metallic materials4. EN 764-5:2014 Pressure equipment - Part 5: Inspection documentation of metallic materials

and compliance with the material specification5. EN 764-1:2015 Pressure equipment - Part 1: Vocabulary6. EN 13445-8:2014/A1:2014 Unfired pressure vessels - Part 8: Additional requirements for pressure vessels

of aluminium and aluminium alloys7. EN 13445-3:2014/A1:2015 Unfired pressure vessels - Part 3: Design8. CEN/TR 13445-101:2015 Unfired pressure vessels - Example of application9. CEN/TR 13445-102:2015 Unfired pressure vessels - Part 102: Example of application of vertical vessel

with bracket supports10. EN 203-2-1:2014 Gas heated catering equipment - Part 2-1: Specific requirements - Open burners

and wok burners11. EN 203-2-3:2014 Gas heated catering equipment - Part 2-3: Specific requirements - Boiling pans12. EN 15632-1:2009+A1:2014 District heating pipes - Pre-insulated flexible pipe systems - Part 1:

Classification, general requirements and test methods13. EN 15632-2:2010+A1:2014 District heating pipes - Pre-insulated flexible pipe systems - Part 2: Bonded

plastic service pipes - Requirements and test methods14. EN 15632-3:2010+A1:2014 District heating pipes - Pre-insulated flexible pipe systems - Part 3: Non bonded

system with plastic service pipes; requirements and test methods15. EN 16430-1:2014 Fan assisted radiators, convectors and trench convectors - Part 1: Technical

specifications and requirements16. EN 16430-2:2014 Fan assisted radiators, convectors and trench convectors - Part 2: Test method

and rating for thermal output17. EN 16430-3:2014 Fan assisted radiators, convectors and trench convectors - Part 3: Test method

and rating for cooling capacity18. EN 442-2:2014 Radiators and convectors - Part 2: Test methods and rating19. EN 13141-6:2014 Ventilation for buildings - Performance testing of components/products for

residential ventilation - Part 6: Exhaust ventilation system packages used in asingle dwelling

77

20. EN 13141-11:2015 Ventilation for buildings - Performance testing of components/products forresidential ventilation - Part 11: Supply ventilation units

21. EN ISO 14414:2015 Pump system energy assessment (ISO/ASME 14414:2015)22. EN 16644:2014 Pumps - Rotodynamic pumps - Glandless circulators having a rated power

input not exceeding 200 W for heating installations and domestic hot waterinstallations - Noise test code (vibro-acoustics) for measuring structure- andfluid-borne noise

23. EN ISO 11011:2015 Compressed air - Energy efficiency - Assessment (ISO 11011:2013)24. EN 15207:2014 Tanks for the transport of dangerous goods - Plug/socket connection and

supply characteristics for service equipment in hazardous areas with 24 Vnominal supply voltage

25. EN 13094:2015 Tanks for the transport of dangerous goods - Metallic tanks with a workingpressure not exceeding 0,5 bar - Design and construction

26. EN 12309-1:2014 Gas-fired sorption appliances for heating and/or cooling with a net heat inputnot exceeding 70 kW - Part 1: Terms and definitions

27. EN 12309-4:2014 Gas-fired sorption appliances for heating and/or cooling with a net heat inputnot exceeding 70 kW - Part 4: Test methods

28. EN 12309-5:2014 Gas-fired sorption appliances for heating and/or cooling with a net heat inputnot exceeding 70 kW - Part 5: Requirements

29. EN 12309-6:2014 Gas-fired sorption appliances for heating and/or cooling with a net heat inputnot exceeding 70 kW - Part 6: Calculation of seasonal performances

30. EN 12309-7:2014 Gas-fired sorption appliances for heating and/or cooling with a net heat inputnot exceeding 70 kW - Part 7: Specific provisions for hybrid appliances

31. EN 12309-3:2014 Gas-fired sorption appliances for heating and/or cooling with a net heat inputnot exceeding 70 kW - Part 3: Test conditions

32. EN 12309-2:2015 Gas-fired sorption appliances for heating and/or cooling with a net heat inputnot exceeding 70 kW - Part 2: Safety

33. ISO 16903:2015 Petroleum and natural gas industries - Characteristics of LNG, influencing thedesign, and material selection

34. ISO 17945:2015 Petroleum, petrochemical and natural gas industries - Metallic materialsresistant to sulfide stress cracking in corrosive petroleum refining environments

35. ISO/TR 12489:2013 Petroleum, petrochemical and natural gas industries - Reliability modelling andcalculation of safety systems

36. ISO/TR 17177:2015 Petroleum and natural gas industries - Guidelines for the marine interfaces ofhybrid LNG terminals

37. ISO/TS 16901:2015 Guidance on performing risk assessment in the design of onshore LNGinstallations including the ship/shore interface

38. ISO/TS 18683:2015 Guidelines for systems and installations for supply of LNG as fuel to ships39. ISO 6553:1980 Automatic steam traps - Marking40. ISO 6554:1980 Flanged automatic steam traps - Face-to-face dimensions41. ISO 6704:1982 Automatic steam traps - Classification42. ISO 6948:1981 Automatic steam traps - Production and performance characteristic tests43. ISO 7841:1988 Automatic steam traps - Determination of steam loss - Test methods44. ISO 7842:1988 Automatic steam traps - Determination of discharge capacity - Test methods45. ISO 19372:2015 Microturbines applications - Safety

78

Technical Committee No. 275“Food product analysis. Containers in contact with food”,

25 standards


1. EN ISO 8442-5:2004 Materials and articles in contact with foodstuffs - Cutlery and table holloware -Part 5: Specification for sharpness and edge retention test of cutlery (ISO 8442-5:2004)

2. EN 12546-1:2000/AC:2005 Materials and articles in contact with foodstuffs - Insulated containers fordomestic use - Part 1: Specification for vacuum ware, insulated flasks and jugs

3. EN 12014-1:1997/A1:1999 Foodstuffs - Determination of nitrate and/or nitrite content - Part 1: Generalconsiderations

4. EN ISO 21571:2005 Foodstuffs - Methods of analysis for the detection of genetically modifiedorganisms and derived products - Nucleic acid extraction (ISO 21571:2005)

5. EN ISO 11290-1:1996/A1:2004

Microbiology of food and animal feeding stuffs - Horizontal method for thedetection and enumeration of Listeria monocytogenes - Part 1: Detectionmethod - Amendment 1: Modification of the isolation media and thehaemolysis test, and inclusion of precision data (ISO 11290-1:1996/AM1:2004)

6. EN ISO 11290-2:1998/A1:2004

Microbiology of food and animal feeding stuffs - Horizontal method for thedetection and enumeration of Listeria monocytogenes - Part 2: Enumerationmethod - Amendment 1: Modification of the enumeration medium (ISO 11290-2:1998/AM1:2004)

7. EN 15055:2006 Non fatty foods - Determination of chlormequat and mepiquat - LC-MS/MSmethod

8. EN ISO 6888-3:2003/AC:2005 Microbiology of food and animal feeding stuffs - Horizontal method for theenumeration of coagulase-positive staphylococci (Staphylococcus aureus andother species) - Part 3: Detection and MPN technique for low numbers (ISO6888-3:2003)

9. EN 14185-2:2006 Non fatty foods - Determination of N-methylcarbamate residues - Part 2: HPLCmethod with clean-up on a diatomaceous earth column

10. EN ISO 6887-4:2003/AC:2004 Microbiology of food and animal feeding stuffs - Preparation of test samples,initial suspension and decimal dilutions for microbiological examination - Part4: Specific rules for the preparation of products other than milk and milkproducts, meat and meat products, and fish and fishery products (ISO 6887-4:2003)

11. EN ISO 6579:2002/AC:2006 Microbiology of food and animal feeding stuffs - Horizontal method for thedetection of Salmonella spp (ISO 6579:2002/Cor.1:2004)

12. EN 16618:2015 Food analysis - Determination of acrylamide in food by liquid chromatographytandem mass spectrometry (LC-ESI-MS/MS)

13. EN 16619:2015 Food analysis - Determination of benzo[a]pyrene, benz[a]anthracene, chryseneand benzo[b]fluoranthene in foodstuffs by gas chromatography massspectrometry (GC-MS)

14. EN 16620:2015 Food analysis - Determination of furan in coffee and coffee products byheadspace gas chromatography and mass spectrometry (HS GC-MS)

79

15. EN 16187:2015 Foodstuffs - Determination of fumonisin B1 and fumonisin B2 in processedmaize containing foods for infants and young children - HPLC method withimmunoaffinity column cleanup and fluorescence detection after pre-columnderivatisation

16. EN ISO 16649-3:2015 Microbiology of the food chain - Horizontal method for the enumeration ofbeta-glucuronidase-positive Escherichia coli - Part 3: Detection and mostprobable number technique using 5-bromo-4-chloro-3-indolyl-ß-D-glucuronide(ISO 16649-3:2015)

17. EN ISO 7088:2005 Fish-meal - Vocabulary (ISO 7088:1981)18. EN ISO 6497:2005 Animal feeding stuffs - Sampling (ISO 6497:2002)19. EN ISO 13903:2005 Animal feeding stuffs - Determination of amino acids content (ISO 13903:2005)20. EN ISO 15914:2005 Animal feeding stuffs - Enzymatic determination of total starch content (ISO

15914:2004)21. EN ISO 5983-1:2005 Animal feeding stuffs - Determination of nitrogen content and calculation of

crude protein content - Part 1: Kjeldahl method (ISO 5983-1:2005)22. EN ISO 16472:2006 Animal feeding stuffs - Determination of amylase-treated neutral detergent

fibre content (aNDF) (ISO 16472:2006)23. EN ISO 17375:2006 Animal feeding stuffs - Determination of aflatoxin B1 (ISO 17375:2006)24. ISO 5498:1981 Agricultural food products - Determination of crude fibre content - General

method25. ISO/TS 16634-2:2009 Food products - Determination of the total nitrogen content by combustion

according to the Dumas principle and calculation of the crude protein content -Part 2: Cereals, pulses and milled cereal products

Technical Committee No. 286“Liquefied petroleum gas equipment and accessories”, 11 standards


1. EN ISO 11120:2015 Gas cylinders - Refillable seamless steel tubes of water capacity between 150 land 3000 l - Design, construction and testing (ISO 11120:2015)

2. EN ISO 25760:2015 Gas cylinders - Operational procedures for the safe removal of valves from gascylinders (ISO 25760:2009)

3. EN 12007-3:2015 Gas infrastructure - Pipelines for maximum operating pressure up to andincluding 16 bar - Part 3: Specific functional requirements for steel

4. CEN/TR 13737-2:2014 Gas infrastructure - Implementation Guide for Functional Standards preparedby CEN/TC 234 - Part 2: National Pages related to CEN/TC 234 standards

5. EN 13953:2015 LPG equipment and accessories - Pressure relief valves for transportablerefillable cylinders for Liquefied Petroleum Gas (LPG)

6. EN 14912:2015 LPG equipment and accessories - Inspection and maintenance of LPG cylindervalves at time of periodic inspection of cylinders

7. EN 16631:2015 LPG equipment and accessories - Pressure relief valves for LPG pressurevessels - Reconditioning requirements

8. EN 14071:2015 LPG equipment and accessories - Pressure relief valves for LPG pressurevessels - Ancillary equipment

80

9. CEN/TS 16765:2015 LPG equipment and accessories - Environmental considerations for CEN/TC286 standards

10. EN 14140:2014/AC:2015 LPG equipment and accessories - Transportable refillable welded steelcylinders for LPG - Alternative design and construction

11. ISO 8421-8:1990 Fire protection - Vocabulary - Part 8: Terms specific to fire-fighting, rescueservices and handling hazardous materials

Technical Committee No. 288“Execution of special geotechnical works”, 7 standards


1. EN 1263-1:2014 Temporary works equipment - Safety nets - Part 1: Safety requirements, testmethods

2. EN 1263-2:2014 Temporary works equipment - Safety nets - Part 2: Safety requirements for thepositioning limits

3. EN 12699:2015 Execution of special geotechnical works - Displacement piles4. EN 14199:2015 Execution of special geotechnical works - Micropiles5. EN 1536:2010+A1:2015 Execution of special geotechnical work - Bored piles6. EN 1538:2010+A1:2015 Execution of special geotechnical work - Diaphragm walls7. EN ISO 18674-1:2015 Geotechnical investigation and testing - Geotechnical monitoring by field

instrumentation - Part 1: General rules (ISO 18674-1:2015)

Technical Committee No. 302“Milk, meet and their products”, 1 standard


1. EN ISO 8968-5:2001 Milk - Determination of nitrogen content - Part 5: Determination of protein-nitrogen content (ISO 8968-5:2001)

Technical Committee No. 304“Documentation and information”, 33 standards


1. CEN/TR 15449-5:2015 Geographic information - Spatial data infrastructures - Part 5: Validation andtesting

2. EN ISO 7010:2012/A5:2015 Graphical symbols - Safety colours and safety signs - Registered safety signs -Amendment 5 (ISO 7010:2011/Amd. 5:2014)

3. EN ISO 10628-1:2015 Diagrams for the chemical and petrochemical industry - Part 1: Specification ofdiagrams (ISO 10628-1:2014)

81

4. EN ISO 3098-1:2015 Technical product documentation - Lettering - Part 1: General requirements(ISO 3098-1:2015)

5. ISO 1086:1991 Information and documentation - Title leaves of books6. ISO 11940:1998 Information and documentation - Transliteration of Thai7. ISO 11940-2:2007 Information and documentation - Transliteration of Thai characters into Latin

characters - Part 2: Simplified transcription of Thai language8. ISO 15919:2001 Information and documentation - Transliteration of Devanagari and related

Indic scripts into Latin characters9. ISO 15924:2004 Information and documentation - Codes for the repress. of names of scripts10. ISO 18:1981 Documentation - Contents list of periodicals11. ISO 214:1976 Documentation - Abstracts for publications and documentation12. ISO 2145:1978 Documentation - Numbering of divisions and subdivisions in written

documents13. ISO 215:1986 Documentation - Presentation of contributions to periodicals and other serials14. ISO 233:1984 Documentation - Transliteration of Arabic characters into Latin characters15. ISO 233-2:1993 Information and documentation - Transliteration of Arabic characters into Latin

characters - Part 2: Arabic language - Simplified transliteration16. ISO 233-3:1999 Information and documentation - Transliteration of Arabic characters into Latin

characters - Part 3: Persian language - Simplified transliteration17. ISO 259:1984 Documentation - Transliteration of Hebrew characters into Latin characters18. ISO 259-2:1994 Intelligent transport systems - Account-based ticketing validation - Part 2:

Simplified transliteration19. ISO 3166-2:2013 Codes for the representation of names of countries and their subdivisions - Part

2: Country subdivision code20. ISO 3166-3:2013 Codes for the representation of names of countries and their subdivisions - Part

3: Code for formerly used names of countries21. ISO 3602:1989 Documentation - Romanization of Japanese (kana script)22. ISO 5122:1979 Documentation - Abstract sheets in serial publications23. ISO 5123:1984 Documentation - Headers for microfiche of monographs and serials24. ISO 6357:1985 Documentation - Spine titles on books and other publications25. ISO 7098:1991 Information and documentation - Romanization of Chinese26. ISO 7144:1986 Documentation - Presentation of these and similar documents27. ISO 7154:1983 Documentation - Bibliographic filing principles28. ISO 7275:1985 Documentation - Presentation of title information of series29. ISO 8:1977 Documentation - Presentation of periodicals30. ISO 843:1997 Information and documentation - Conversion of Greek characters into Latin

characters31. ISO 9:1995 Information and documentation - Transliteration of Cyrillic characters into

Latin characters - Slavic and non-Slavic languages32. ISO 9984:1996 Information and documentation - Transliteration of Georgian characters into

Latin characters33. ISO 9985:1996 Information and documentation - Transliteration of Armenian characters into

Latin characters

82

Technical Committee No. 307“Oilseeds, vegetable and animal fats and oils and their by-products.Characteristics and methods of sampling and analysis”, 2 standards


1. EN ISO 12966-1:2014/AC:2015

Animal and vegetable fats and oils - Gas chromatography of fatty acid methylesters - Part 1: Guidelines on modern gas chromatography of fatty acid methylesters (ISO 12966-1:2014)

2. ISO 5498:1981 Agricultural food products - Determination of crude fibre content - Generalmethod

Technical Committee No. 316“Medical devices utilizing tissues”, 19 standards


1. EN ISO 11979-2:2014 Ophthalmic implants - Intraocular lenses - Part 2: Optical properties and testmethods (ISO 11979-2:2014)

2. EN ISO 11978:2014 Ophthalmic optics - Contact lenses and contact lens care products - Labelling(ISO 11978:2014)

3. EN ISO 11979-8:2015 Ophthalmic implants - Intraocular lenses - Part 8: Fundamental requirements(ISO 11979-8:2006 + Amd 1:2011)

4. EN ISO 11135:2014 Sterilization of health-care products - Ethylene oxide - Requirements for thedevelopment, validation and routine control of a sterilization process formedical devices (ISO 11135:2014)

5. EN ISO 10343:2014 Ophthalmic instruments - Ophthalmometers (ISO 10343:2014)6. EN ISO 11979-6:2014 Ophthalmic implants - Intraocular lenses - Part 6: Shelf-life and transport

stability testing (ISO 11979-6:2014)7. EN ISO 11979-7:2014 Ophthalmic implants - Intraocular lenses - Part 7: Clinical investigations8. EN ISO 11979-8:2015 Ophthalmic implants - Intraocular lenses - Part 8: Fundamental requirements

(ISO 11979-8:2006 + Amd 1:2011)9. EN ISO 12870:2014 Ophthalmic optics - Spectacle frames - Requirements and test methods (ISO

12870:2012)10. EN ISO 13212:2014 Ophthalmic optics - Contact lens care products - Guidelines for determination

of shelf-life (ISO 13212:2014)11. EN ISO 14534:2015 Ophthalmic optics - Contact lenses and contact lens care products -

Fundamental requirements (ISO 14534:2011)12. EN ISO 14730:2014 Ophthalmic optics - Contact lens care products - Antimicrobial preservative

efficacy testing and guidance on determining discard date (ISO 14730:2014)13. EN ISO 8598-1:2014 Optics and optical instruments - Focimeters - Part 1: General purpose

instruments (ISO 8598-1:2014)14. EN ISO 11979-

9:2006/A1:2014Ophthalmic implants - Intraocular lenses - Part 9: Multifocal intraocular lenses(ISO 11979-9:2006/Amd 1:2014)

83

15. EN ISO 11979-10:2006/A1:2014 Ophthalmic implants - Intraocular lenses - Part 10: Phakic intraocular lenses(ISO 11979-10:2006/Amd 1:2014)

16. CEN ISO/TS 13004:2014 Sterilization of health care products - Radiation - Substantiation of selectedsterilization dose: Method VDmaxSD (ISO/TS 13004:2013)

17. ISO/TS 19218-1:2011 Medical devices - Hierarchical coding structure for adverse events - Part 1:Event-type codes

18. ISO/TS 19218-2:2012 Medical devices - Hierarchical coding structure for adverse events - Part 2:Evaluation codes

19. ISO/TS 19218-1:2011/Amd1:2013

Medical devices - Hierarchical coding structure for adverse events - Part 1:Event-type codes

Technical Committee No. 320“Transport. Logistics and services”, 114 standards


1. EN 16646:2014 Maintenance - Maintenance within physical asset management2. EN 16230-1:2013+A1:2014 Leisure karts - Part 1: Safety requirements and test methods for karts3. EN ISO 10239:2014 Small craft - Liquefied petroleum gas (LPG) systems (ISO 10239:2014)4. EN ISO 10240:2004/A1:2015 Small craft - Owner's manual (ISO 10240:2004/Amd 1:2015)5. EN ISO 21487:2012/A1:2014 Small craft - Permanently installed petrol and diesel fuel tanks - Amendment 16. EN ISO 25197:2012/A1:2014 Small craft - Electrical/electronic control systems for steering, shift and throttle -

Amendment 1 (ISO 25197:2012/Amd 1:2014)7. EN ISO 18854:2015 Small craft - Reciprocating internal combustion engines exhaust emission

measurement - Test-bed measurement of gaseous and particulate exhaustemissions (ISO 18854:2015)

8. EN ISO 13297:2014 Small craft - Electrical systems - Alternating current installations9. EN 2226:2014 Aerospace series - Steel X105CrMo17 (1.4125) - Hardened and tempered - Hand

and die forgings - De ≤ 150 mm10. EN 2278:2014 Aerospace series - Steel X12CrNiMoV12-3 (1.4933) - 900 MPa ≤ Rm ≤ 1 100 MPa

- Bars - De ≤ 150 mm11. EN 2838:2013 Aerospace series - Chloroprene rubber (CR) - Heat resistance - Hardness 70

IRHD12. EN 2839:2013 Aerospace series - Chloroprene rubber (CR) - Heat resistance - Hardness 80

IRHD13. EN 2841:2013 Aerospace series - Acrylonitrile-butadiene rubber (NBR) - Mineral oil resistant -

Hardness 60 IRHD14. EN 2842:2013 Aerospace series - Acrylonitrile-butadiene rubber (NBR) - Mineral oil resistant -



Hardness 90 IRHD17. EN 2845:2013 Aerospace series - Acrylonitrile-butadiene rubber (NBR) - Fuel and synthetic oil

resistant - Hardness 50 IRHD

84

18. EN 2846:2013 Aerospace series - Acrylonitrile-butadiene rubber (NBR) - Fuel and synthetic oilresistant - Hardness 60 IRHD




22. EN 3354:2013 Aerospace series - Titanium alloy Ti-6Al-4V - Annealed - Sheet for superplasticforming - a ≤ 6 mm

23. EN 3528:2013 Aerospace series - Steel X2NiCoMo18-8-5 (1.6359) - Vacuum induction melted andvacuum arc remelted - Solution treated and precipitation treated - Bar - a or D ≤ 150mm - 1 750 MPa ≤ Rm ≤ 2 000 MPa

24. EN 3783:2013 Aerospace series - Fibre composite materials - Normalisation of fibre dominatedmechanical properties

25. EN 4594:2013 Aerospace series - Paints and varnishes - Two component cold curing polyurethanefinish - Supersonic erosion resistance

26. EN 4595:2013 Aerospace series - Paints and varnishes - Two component cold curing polyurethanefinish - Subsonic erosion resistance

27. EN 4265:2013 Aerospace series - Bearing spherical plain, metal to metal in corrosion resisting steel- Wide series - Dimensions and loads - Inch series

28. EN 3813:2013 Aerospace series - Titanium alloy TI-P64001 (Ti-6Al-4V) - Annealed - Bar and wirefor forged fasteners - De ≤ 50 mm

29. EN 4266:2013 Aerospace series - Bearing spherical plain, metal to metal, in corrosion resistingsteel, cadmium plated - Wide series - Dimensions and loads - Inch series

30. EN 9115:2013 Quality Management Systems - Requirements for Aviation, Space and DefenseOrganizations - Deliverable Software (Supplement to EN 9100)

31. EN 6049-008:2013 Aerospace series - Electrical cables, installation - Protective sleeves in meta-aramidfibres - Part 008: Self-wrapping shielded (EMI) protective sleeve with nickel copperbraid, flexible post installation operating temperature from – 55 ˚C to 200 ˚C -Product standard

32. EN 3716-004:2014 Aerospace series - Connectors, single-way with triaxial interface for transm. ofdigital data - Part 004: Solder plug and terminator - Product standard

33. EN 4826:2014 Aerospace series - Zinc-Nickel (12 %-16 % Ni) plating of steels with specified tensilestrength ≤ 1 450 MPa, copper alloys, nickel alloys and aluminium alloys for partsand fasteners

34. EN 4651:2014 Aerospace series - Copper-clad aluminium alloy conductors for electrical cables -Product standard

35. EN 4628:2013 Aerospace series - Steel X4CrNiMo16-5-1 (1.4418) - Air melted - Hardened andtempered - Bar - De ≤ 200 mm — 1 150 MPa ≤ Rm ≤ 1 300 MPa

36. EN 4629:2013 Aerospace series - Steel X4CrNiMo16-5-1 (1.4418) - Air melted - Softened - Forgingstock - De ≤ 300 mm

37. EN 4631:2013 Aerospace series - Steel X4CrNiMo16-5-1 (1.4418) - Air melted - Hardened andtempered - Bar - De ≤ 200 mm - 900 MPa ≤ Rm ≤ 1 050 MPa

38. EN 3102:2013 Aerospace series - Sealants - Test methods - Determination of low-temperatureflexibility

39. EN 2267-009:2013 Aerospace series - Cables, electrical, for general purpose - Operating temperaturesbetween - 55 °C and 260 °C - Part 009: DRA family, single and multicore assembly -Product standard

85

40. EN 3475-411:2014 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 411:Resistance to fluids

41. EN 4056-004:2014 Aerospace series - Cable ties for harnesses - Part 004: Plastic cable ties - Foroperating temperatures - 55 °C to 105 °C and - 55 °C to 150 °C - Product standard

42. EN 4199-001:2013 Aerospace series - Bonding straps for aircraft - Part 001: Technical specification43. EN 4199-004:2014 Aerospace series - Bonding straps for aircraft - Part 004: Round bonding straps,

copper, tin plated -65 °C up to 150 °C and nickel plated -65 °C up to 260 °C -Product Standard

44. EN 4708-001:2014 Aerospace series - Sleeving, heat-shrinkable, for binding, insulation andidentification - Part 001: Technical specification

45. EN 6059-406:2014 Aerospace series - Electrical cables, installation - Protection sleeves - Test methods -Part 406: Vibration

46. EN 6059-502:2014 Aerospace series - Electrical cables, installation - Protection sleeves - Test methods -Part 502: Resistance to electrical arcs

47. EN 6059-504:2014 Aerospace series - Electrical cables, installation - Protection sleeves - Test methods -Part 504: Temperature rise within a loom due to self-heating when protected by asleeve

48. EN 2402:2014 Aerospace series - Heat resisting nickel base alloy NiCr20Co3Fe3 - Annealed - Wire- D ≤ 10 mm

49. EN 4627:2014 Aerospace series - Steel X4CrNiMo16-5-1 (1.4418) - Air melted - Hardened andtempered - Forgings - De ≤ 200 mm - 1 150 MPa ≤ Rm ≤ 1 300 MPa

50. EN 4630:2014 Aerospace series - Steel X4CrNiMo16-5-1 (1.4418) - Air melted - Hardened andtempered - Forgings - De ≤ 200 mm - 900 MPa ≤ Rm ≤ 1 050 MPa

51. EN 4707:2014 Aerospace series - Acid pickling of aluminum and aluminum alloy withouthexavalent chromium

52. EN 3826:2014 Aerospace series - Fluorosilicone rubber (FVMQ) - Hardness 70 IRHD53. EN 3827:2014 Aerospace series - Fluorosilicone rubber (FVMQ) - Hardness 80 IRHD54. EN 4549:2014 Aerospace series - Pipe coupling, in heat resisting steel or in heat resisting nickel

alloy - Coupling end, welded - Design configuration - Inch series55. EN 4550-1:2014 Aerospace series - Pipe coupling, 37° - Design configuration - Inch series - Part 1:

Male sealing ends, spherical56. EN 4550-4:2014 Aerospace series - Pipe coupling, 37° - Design configuration - Inch series - Part 4:

Female sealing ends57. EN 4551:2014 Aero. series - Pipe coupling, 37°, in heat resisting steel- Swivel nuts - Inch series58. EN 3645-001:2013 Aerospace series - Connectors, electrical, circular, scoop-proof, triple start threaded

coupling, operating temperature 175 °C or 200 °C continuous - Part 001: Technicalspecification

59. EN 3660-025:2013 Aerospace series - Cable outlet accessories for circular and rectangular electricaland optical connectors - Part 025: Cable outlet, style A, straight, unsealed, withcable tie strain relief for EN 3646 - Product standard

60. EN 3660-027:2013 Aerospace series - Cable outlet accessories for circular and rectangular electricaland optical connectors - Part 027: Cable outlet, style A, 45°, unsealed, with cable tiestrain relief for EN 3646 - Product standard

61. EN 3660-038:2013 Aerospace series - Cable outlet accessories for circular and rectangular electricaland optical connectors - Part 038: Manual installation tool, style Z, for installation ofstainless steel shield termination band EN 3660-033, to cable outlet accessories -Product standard

62. EN 3682-005:2013 Aerospace series - Connectors, plug and receptacle, electrical, rectangular,

86

interchangeable insert type, rack to panel, operating temperature 150 °C continuous- Part 005: Size 2 plug - Product standard

63. EN 3682-006:2013 Aerospace series - Connectors, plug and receptacle, electrical, rectangular,interchangeable insert type, rack to panel, operating temperature 150 °C continuous- Part 006: Size 3 receptacle - Product standard

64. EN 3682-007:2013 Aerospace series - Connectors, plug and receptacle, electrical, rectangular,interchangeable insert type, rack to panel, operating temperature 150 °C continuous- Part 007: Size 3 plug - Product standard

65. EN 3682-008:2013 Aerospace series - Connectors, plug and receptacle, electrical, rectangular,interchangeable insert type, rack to panel, operating temperature 150 °C continuous- Part 008: Size 4 receptacle - Product standard

66. EN 3682-009:2013 Aerospace series - Connectors, plug and receptacle, electrical, rectangular,interchangeable insert type, rack to panel, operating temperature 150 °C continuous- Part 009: Size 4 plug - Product standard

67. EN 2833-005:2013 Aerospace series - Glass fibre thermosetting preimpregnates - Technicalspecification - Part 005: Glass fabric/phenolic resin preimpregnate

68. EN 2840:2013 Aerospace series - Acrylonitrile-butadiene rubber (NBR) - Mineral oil resistant -Hardness 50 IRHD

69. EN 3697:2013 Aerospace series - Acrylonitrile-butadiene rubber (NBR) - Low temperatureresistant - Hardness 60 IRHD

70. EN 3698:2013 Aerospace series - Acrylonitrile-butadiene rubber (NBR) - Low temperatureresistant - Hardness 70 IRHD

71. EN 9300-004:2013 Aerospace series - LOTAR - Long Term Archiving and Retrieval of digital technicalproduct documentation such as 3D, CAD and PDM data - Part 004: Descriptionmethods

72. EN 9300-011:2013 Aerospace series - LOTAR Long Term Archiving and Retrieval of digital technicalproduct documentation such as 3D, CAD and PDM data - Part 011: Referenceprocess description "Data preparation"

73. EN 9300-012:2013 Aerospace series - LOTAR Long Term Archiving and Retrieval of digital technicalproduct documentation such as 3D, CAD and PDM data - Part 012: Referenceprocess description ''Ingest''

74. EN 9300-013:2013 Aerospace series - LOTAR LOng Term Archiving and Retrieval of digital technicalproduct documentation such as 3D, CAD and PDM data - Part 013: Referenceprocess description ''Archival Storage''

75. EN 9300-014:2013 Aerospace series - LOTAR - LOng Term Archiving and Retrieval of digital technicalproduct documentation such as 3D, CAD and PDM data - Part 014: Referenceprocess description ''Retrieval''

76. EN 9300-015:2013 Aerospace series - LOTAR - LOng Term Archiving and Retrieval of digital technicalproduct documentation such as 3D, CAD and PDM data - Part 015: Referenceprocess description ''Removal''

77. EN 9104-001:2013 Aerospace series - Quality management systems - Part 001: Requirements forAviation, Space, and Defence Quality Management System Certification Programs

78. EN 4526:2013 Aerospace series - Metallic materials - Test methods - Sharp edge-notch tensiletesting for sheet and strip

79. EN 3861:2013 Aerospace series - Non-metallic materials - Glass transparencies - Material standard- Thermally tempered soda lime float glass

80. EN 3862:2013 Aerospace series - Non-metallic materials - Glass transparencies - Material standard- Chemically tempered soda lime float glass

81. EN 3863:2013 Aerospace series - Non-metallic materials - Glass transparencies - Test methods -

87

Determination of flatness82. EN 3866:2013 Aerospace series - Non-metallic materials - Glass transparencies - Test methods -

Determination of ream and surface ripple83. EN 4106:2013 Aerospace series - Non-metallic materials - Structural adhesive systems - Paste

adhesive - Technical specification84. EN 4488:2013 Aerospace series - Non-metallic materials - Anaerobic polymerisable compounds -

Threadlocking - Torque strength 2 Nm85. EN 4491:2013 Aerospace series - Non-metallic materials - Anaerobic polymerisable compounds -

Threadlocking - Torque strength 16 Nm86. EN 4492:2013 Aerospace series - Non-metallic materials - Anaerobic polymerisable compounds -

Threadlocking - Torque strength 19 Nm87. EN 4701-002:2013 Aerospace series - Connectors, optical, rectangular, modular, operating temperature

125 °C, for EN 4531-101 contacts - Part 002: Material88. EN 3864:2013 Aerospace series - Non-metallic materials - Glass transparencies - Test methods -

Determination of modulus of rupture89. EN 4632-006:2013 Aerospace series - Weldability and brazeability of materials in aerospace

constructions - Part 006: Homogeneous assemblies of titanium alloys90. EN 4701-003:2013 Aerospace series - Connectors, optical, rectangular, modular, operating temperature

125 °C, for EN 4531-101 contacts - Part 003: Module series 2 - Product standard91. EN 3646-004:2013 Aerospace series - Connectors, electrical, circular, bayonet coupling, operating

temperature 175 °C or 200 °C continuous - Part 004: Receptacle, jam-nut mounting -Product standard

92. EN 3983:2013 Aerospace series - Aluminium alloy AL-P7050- T7651 - Plate -6 mm<a ≤ 160 mm93. EN 2032-001:2014 Aerospace series - Metallic materials - Part 001: Conventional designation94. EN 2030:2013 Aerospace series - Steel X105CrMo17 (1.3544) - Hardened and tempered - Bars - De

≤ 150 mm95. EN 4156:2013 Aerospace series - Rod ends, with self-aligning double row ball bearings and

threaded shank in steel - Inner ring and balls in corrosion resisting steel -Dimensions and loads - Inch series

96. EN 4538-2:2014 Aerospace series - Bearings, spherical plain, in corrosion resisting steel with self-lubricating liner elevated load under low oscillations - Narrow series - Dimensionsand loads - Part 2: Inch series

97. EN 3682-001:2013 Aerospace series - Connectors, plug and receptacle, electrical, rectangular,interchangeable insert type, rack to panel, operating temperature 150 °C continuous- Part 001: Technical specification

98. EN 3682-002:2013 Aerospace series - Connectors, plug and receptacle, electrical, rectangular,interchangeable insert type, rack to panel, operating temperature 150 °C continuous- Part 002: Specification of performance and contact arrangements

99. EN 2565:2013 Aerospace series - Preparat. of carbon fibre reinforced resin panels for test purp100. EN 2043:2013 Aerospace series - Metallic materials - General requirements for semi-finished

product qualification (excluding forgings and castings)101. EN 4507:2013 Aerospace series - Non-metallic materials - Textiles - Test method - Determination

of water extractable matter102. EN 4505:2013 Aerospace series - Non-metallic materials - Textiles - Test method - Determination

of dimensional stability103. EN 4503:2013 Aerospace series - Non-metallic materials - Textiles - Test method - Determination

of water soluble chloride and sulfate of aqueous extracts104. EN 4262:2013 Aerospace series - Heat resisting alloy FE-PA4901 (X12CrNiCoMoW21-20) - As

88

forged - Forging stock - a or D ≤ 200 mm - 690 MPa ≤ Rm ≤ 880MPa105. EN 4263:2013 Aerospace series - Heat resisting alloy FE-PA4901 (X12CrNiCoMoW21-20) - As

forged - Forging stock - a or D ≤ 200 mm - 690 MPa ≤ Rm ≤ 960MPa106. EN 4504:2013 Aerospace series - Non-metallic materials, Textiles - Test method - Determination of

flexibility of narrow fabrics107. EN 2648:2013 Aerospace series - Washers, concave, in alloy steel, cadmium plated108. EN 2267-010:2013 Aerospace series - Cables, electrical, for general purpose - Operating temperatures

between - 55 °C and 260 °C - Part 010: DR family, single UV laser printable -Product standard

109. EN 2346-005:2013 Aerospace series - Cable, electrical, fire resistant - Operating temperatures between- 65 °C and 260 °C - Part 005: DW family, single UV laser printable and multicoreassembly - Light weight - Product standard

110. EN 2665-001:2013 Aerospace series - Circuit breakers, three-pole, temperature compensated, ratedcurrent 20 A to 50 A - Part 001: Technical specification

111. EN 2665-004:2013 Aerospace series - Circuit breakers, three-pole, temperature compensated, ratedcurrent 20 A to 50 A - Part 004: UNC thread terminals - Product standard

112. EN 3155-065:2013 Aerospace series - Electrical contacts used in elements of connection - Part 065:Contacts, electrical, male, type A, crimp, class S, size 8 - Product standard

113. EN 3155-066:2013 Aerospace series - Electrical contacts used in elements of connection - Part 066:Contacts, electrical, female, type A, crimp, class S, size 8 - Product standard

114. EN 3375-012:2013 Aerospace series - Cable, electrical, for digital data transmission - Part 012: Singlebraid - Star Quad 100 ohms - 260 °C - Type KH - Product standard

Technical Committee No. 336“Bituminous binders. Road materials”, 37 standards


1. EN 12966:2014 Road vertical signs - Variable message traffic signs2. EN 14389-1:2015 Road traffic noise reducing devices - Procedures for assessing long term

performance - Part 1: Acoustical characteristics3. EN 14389-2:2015 Road traffic noise reducing devices - Procedures for assessing long term

performance - Part 2: Non-acoustical characteristics4. EN 1793-4:2015 Road traffic noise reducing devices - Test method for determining the acoustic

performance - Part 4: Intrinsic characteristics - In situ values of sound diffractio5. EN 12697-2:2015 Bituminous mixtures - Test methods - Part 2: Determination of particle size

distribution6. EN 1344:2013/AC:2015 Clay pavers - Requirements and test methods7. EN 1340:2003/AC:2006 Concrete kerb units - Requirements and test methods8. EN 15429-3:2015 Sweepers - Part 3: Efficiency of particulate matter collection - Testing and

Evaluation9. EN 15429-4:2015 Sweepers - Part 4: Symbols for operator controls and other displays10. ISO 1176:1990 Road vehicles - Masses - Vocabulary and codes11. ISO 22628:2002 Road vehicles - Recyclability and recoverability - Calculation method12. ISO 2416:1992 Passenger cars - Mass distribution13. ISO 2958:1973 Road vehicles - Exterior protection for passenger cars

89

14. ISO 3208:1974 Road vehicles - Evaluation of protrusions inside passenger cars15. ISO 3779:2009 Road vehicles - Vehicle identification number (VIN) - Content and structure16. ISO 3780:2009 Road vehicles - World manufacturer identifier (WMI) code17. ISO 3780:2009/Cor 1:2010 Road vehicles - World manufacturer identifier (WMI) code18. ISO 3832:2002 Passenger cars - Luggage compartments - Meth. of measuring reference

volume19. ISO 3833:1977 Road vehicles - Types - Terms and definitions20. ISO 4030:1983 Road vehicles - Vehicle identification number (VIN) - Location and

attachment21. ISO 4100:1980 Road vehicles - World parts manufacturer identifier (WPMI) code22. ISO 4130:1978 Road vehicles - Three-dimensional reference system and fiducial marks -

Definitions23. ISO 4131:1979 Road vehicles - Dimensional codes for passenger cars24. ISO 612:1978 Road vehicles - Dimensions of motor vehicles and towed vehicles - Terms

and definitions25. ISO 11375:1998 Building construction machinery and equipment - Terms and definitions26. ISO 11886:2002 Building construction machinery and equipment - Pile driving and

extracting equipment - Terminology and commercial specifications27. ISO 11886:2002/Cor 1:2006 Building construction machinery and equipment - Pile driving and

extracting equipment - Terminology and commercial specifications28. ISO 15643:2002/Amd 1:2012 Road construction and maintenance equipment - Bituminous binder

spreaders/sprayers - Terminology and commercial specifications29. ISO 15645:2002/Amd 1:2013 Road construction and maintenance equipment - Road milling machinery -

Terminology and commercial specifications30. ISO 15688:2012 Road construction and maintenance equipment - Soil stabilizers -

Terminology and commercial specifications31. ISO 16039:2004/Amd 1:2013 Road construction and maintenance equipment - Slipform pavers -

Definitions and commercial specifications32. ISO 19433:2008 Building construction machinery and equipment - Pedestrian-controlled

vibratory plates - Terminology and commercial specifications33. ISO 19452:2008 Building construction machinery and equipment - Pedestrian-controlled

vibratory (percussion) rammers - Terminology and commercialspecifications

34. ISO 19452:2008/Cor 1:2008 Building construction machinery and equipment - Pedestrian-controlledvibratory (percussion) rammers - Terminology and commercialspecifications

35. ISO 21873-1:2008 Building construction machinery and equipment - Mobile crushers - Part 1:Terminology and commercial specifications

36. ISO 21873-2:2009 Building construction machinery and equipment - Mobile crushers - Part 2:Safety requirements

37. ISO 22242:2005/Amd 1:2013 Road construction and road maintenance machinery and equipment - Basictypes - Identification and description

work programme - dps · 2015. 7. 14. · 69. iec 60050-441:1984 international electrotechnical...

Documents