wooden toys...general pattern information when printing this pattern it is important to print it...
TRANSCRIPT
Wooden Toys
Russ Claridy retains the right to the pattern. If you have any questions about the use of
this pattern contact me [email protected]
All toys are designed for 3/4” thick material with the exception of the wing on the shuttle.
11/2” wood wheels1/4” wooden axles (dowels)
I recommend you drill the holes for the axles with a 7mm drill bit to allow roomfor them to spin freely.
3/4”Material
1/4”Material
2017Simply Wooden Creations
Pattern Personal Use Only. Not To Be Sold Or Distributed
My thanks to Steve French(Wood n Stuff) for the
original idea of the shuttle.
1/4”Material
3/4”Material
My thanks to Steve French(Wood n Stuff) for the
original idea of the shuttle.
2017Simply Wooden Creations
Pattern Personal Use Only. Not To Be Sold Or Distributed
3/4”Material
2017Simply Wooden Creations
Pattern Personal Use Only. Not To Be Sold Or Distributed
2017Simply Wooden Creations
Pattern Personal Use Only. Not To Be Sold Or Distributed