without barcode reader 20.08.2015 22:33. without barcode reader 20.08.2015 22:33 2. select „easy...

Download Without barcode reader 20.08.2015 22:33. without barcode reader 20.08.2015 22:33 2. Select „Easy preparation“. Click OK. 1. Start PrepGilsonST program

Post on 24-Dec-2015

212 views

Category:

Documents

0 download

Embed Size (px)

TRANSCRIPT

  • Slide 1
  • without barcode reader 20.08.2015 22:33
  • Slide 2
  • without barcode reader 20.08.2015 22:33 2. Select Easy preparation. Click OK. 1. Start PrepGilsonST program with a double click.
  • Slide 3
  • without barcode reader 20.08.2015 22:33 3. Check if Gilson Status is connected.
  • Slide 4
  • without barcode reader 20.08.2015 22:33 4. Initialize the Gilson robot by pressing the green button. The status changes to home seeking. The Gilson robot is initialized.
  • Slide 5
  • without barcode reader 20.08.2015 22:33 5. Select Edit mode to delete or insert racks.
  • Slide 6
  • without barcode reader 20.08.2015 22:33 5a. Delete a rack In Edit mode double click on a grey area within a rack field. The program asks, if the selected rack shall be deleted. Click Yes.
  • Slide 7
  • without barcode reader 20.08.2015 22:33 5a. Delete a rack The source is deleted.
  • Slide 8
  • without barcode reader 20.08.2015 22:33 5b. Insert a new rack Double click on an empty rack area. Select the used rack type.
  • Slide 9
  • without barcode reader 20.08.2015 22:33 5b. Insert a new rack ID Barcode: Enter the new barcode ID, e.g. ABC0033#NMR Type Barcode: Select the Starting corner and pattern. The barcode type is a combination of the rack name, the starting corner and the pattern. Click OK.
  • Slide 10
  • without barcode reader 20.08.2015 22:33 5b. Insert a new rack Click Save Tray and uncheck Edit mode.
  • Slide 11
  • without barcode reader 20.08.2015 22:33 6. Check or select the appropriate procedure and solvent. Now it is possible to set up orders.
  • Slide 12
  • without barcode reader 20.08.2015 22:33 7. Defining the source rack Click the Source button. Select the source tubes with a lasso operation: Click and hold the left mouse cursor. Draw a rectangle. The marked positions will be shown as orders.
  • Slide 13
  • without barcode reader 20.08.2015 22:33 7. Defining the source rack Tip: Use the Ctrl Key and left mouse key to select variable sources.
  • Slide 14
  • without barcode reader 20.08.2015 22:33 The marked positions will be shown as orders with their destination. Select the destination tubes with a lasso operation: Click and hold the left mouse cursor. Draw a rectangle. 8. Defining the destination rack Click the Destination button.
  • Slide 15
  • without barcode reader 20.08.2015 22:33 Tip: Use the right mouse key to zoom in and out. Use the Ctrl Key and left mouse key to select variable sources.
  • Slide 16
  • without barcode reader 20.08.2015 22:33 9. Click the button Create Orders. All Created Orders are listed. Click OK.
  • Slide 17
  • without barcode reader 20.08.2015 22:33 10. See the orders running or ready to run.
  • Slide 18
  • without barcode reader 20.08.2015 22:33 11. The first order has finished with OK.
  • Slide 19
  • without barcode reader 20.08.2015 22:33 12. All orders are finished.

Recommended

View more >