with touch screen - karl storz · i 1-15 table of contents unidrive® s iii ent scb motor systems 3...
TRANSCRIPT
EXCERPT FROM CATALOG ENT
UNIDRIVE® S III ENT SCB
Information on events is available on the KARL STORZ websitewww.karlstorz.com
with touch screen
© All pictures, photos and product descriptions are the intellectual property of KARL STORZ & Co. KG.Utilisation and copies by third parties have to be authorized. All rights reserved.
3-15
Important Notes:
It is recommended to check the suitability of the product for the intended procedure prior to use.
Endoscopes and accessories contained in this catalog have been designed in part with the cooperation ofphysicians and are manufactured by the KARL STORZ group. If subcontractors are hired to manufactureindividual components, these are made according to proprietary KARL STORZ plans or drawings.Furthermore, these products are subject to strict quality and control guidelines of the KARL STORZ group.Both contractual and general legal provisions prohibit subcontractors from supplying componentsmanufactured by order of KARL STORZ to competitors.
Any assumptions that competitors’ endoscopes and accessories are acquired from the same suppliers as theKARL STORZ products are not correct. Moreover, endoscopes and instruments provided by competitors arenot manufactured according to the design specifications of KARL STORZ. This means it cannot be assumedthat these endoscopes and accessories – even if they look identical on the outside – are constructed in thesame manner and have been tested according to the same criteria.
Standardized Design and Labeling
KARL STORZ participates both in national and international bodies involved in the development of standardsfor endoscopes and endoscopic accessories. Standardized design and development therefore have long beenimplemented consistently by KARL STORZ. The user can rest assured that all products by the KARL STORZgroup have been designed and constructed not only in compliance with strict internal quality guidelines, butalso with international standards. All data relevant for safe use, such as viewing direction, sizes anddiameters, or notes regarding sterilization of telescopes, are applied to the instruments, have been formulatedaccording to international standards, and therefore provide reliable information.
As we constantly seek to improve and modify our products, we reserve the right to make changes in designthat vary from catalog descriptions.
Original or Counterfeit
KARL STORZ products are name brand articles renowned around the world and represent the state of the artin important areas of healthcare. A large number of “copy cat” products are currently being offered in manymarkets. These products are designed intentionally to resemble KARL STORZ products and use marketingstrategies that at least point out their compatibility with KARL STORZ products. These products are by nomeans genuine products, since genuine KARL STORZ products are sold worldwide exclusively under thename of KARL STORZ, which appears on the packaging and the product. In the absence of such labeling,the product is not from KARL STORZ.
KARL STORZ, therefore, is unable to ensure that such products are actually compatible with genuineKARL STORZ products or can be used with them without injury to the patient.
I
1-15
Table of ContentsUNIDRIVE® S III ENT SCB
MOTOR SYSTEMS 3
UNIDRIVE® S III ENT SCB – Recommended Standard Set Configuration 4
UNIDRIVE® S III ENT SCB – System Components 5
Optional Accessories – for UNIDRIVE® S III ENT 6
SHAVER HANDPIECES 7
DrillCut-X® II Shaver Handpieces – Special Features 8
Handle for DrillCut-X® II Shaver Handpieces 9
Shaver Blades 10
Shaver Blades, straight – for Nasal Sinuses and Skull Base Surgery 11, 14
Shaver Blades, curved – for Nasal Sinuses and Skull Base Surgery 12-13, 15-16
Sinus Burrs, curved – for Nasal Sinuses and Skull Base Surgery 17
Larynx Shaver Blades, distally and proximally curved – for larynx surgery 18
HIGH-SPEED MICRO MOTOR 19
High-Speed Handpieces – angled, 100,000 rpm 20
High-Speed Handpieces – angled, 60,000 rpm 21
High-Speed Handpieces – straight, 60,000 rpm 22
High-Speed Handpieces – malleable, slim, angled, 60,000 rpm 23
High-Speed Standard Burrs, High-Speed Diamond Burrs 24, 26
High-Speed Diamond Burrs, High-Speed Acorns, High-Speed Barrel Burrs, High-Speed Neuro Fluted Burrs 25
High-Speed Diamond Burrs, High-Speed Cylinder Burrs, LINDEMANN High-Speed Fluted Burrs 27
High-Speed Diamond Burrs 28
EC MICRO MOTOR II 29
INTRA Drill Handpieces – 80,000 rpm, angled 30
INTRA Drill Handpieces – 40,000 rpm, straight 31
INTRA Drill Handpieces – 40,000 rpm, angled 32
Straight Shaft Burrs – Length 12.5 cm 33
Straight Shaft Burrs – Length 9.5 cm 34
Straight Shaft Burrs – Length 7 cm 35
Straight Shaft Burrs – Length 5.7 cm 36
Burrs and Accessories 37
Accessories for Burrs 38
STAMMBERGER-SACHSE Intranasal Drill 39
Micro Saws, oscillating 40
Micro Sagittal Saw, Osseo Scalpel 41
Micro Compass Saws 42
Dermatomes 43
WIRE TRAYS FOR CLEANING AND STERILIZATION 44
II
1-15
CCleaning Adaptor 8, 10, 11, 12, 13
Connecting Cable 29
DDermatome 43
Diamond Straight Shaft Burr 33, 34, 35, 36, 37
DrillCut-X® II N Shaver Handpiece 8
DrillCut-X® II Shaver Handpiece 8, 11, 12, 13, 14, 15, 16, 17, 18
HHandle 9
High-Performance EC Micro Motor II 29
High-Speed Acorn 25
High-Speed Barrel Burr 25
High-Speed Coarse Diamond Burr 25, 27, 28
High-Speed Cylinder Burr 27
High-Speed Diamond Burr 24, 26, 28
High-Speed Handpiece 20, 21, 22, 23
High-Speed Micro-Motor 19
High-Speed Neuro Fluted Burr 25
High-Speed Standard Burr 24, 26
IINTRA Drill Handpiece 30, 31, 32
LLarynx Shaver Attachment 18
LINDEMANN Burr 37
LINDEMANN High-Speed Fluted Burr 27
MMetal Bar 36, 38
Micro Compass Saw 42
Micro Sagittal Saw 41
OOscillating Micro Saw 40
Osseo Scalpel, Micro Saw 41
RRack 33, 34, 35, 36, 38
Rapid Diamond Burr 33, 34
Rapid Diamond Straight Shaft Burr 33, 34, 35, 36
Replacement Blade 43
SSaw Blade 40, 41, 42
Shaver Blade with integrated irrigationfor DrillCut-X® Handpiece 11, 12, 13, 14, 15, 16
Sinus Burr with integrated irrigationfor DrillCut-X® Handpiece 17
Sinus Shaver with integrated irrigationfor DrillCut-X® Handpiece 17
Size Template 37
Spray Nozzle 6
STAMMBERGER-SACHSE Intranasal Drill 39
Standard Straight Shaft Burr 33, 34, 35, 36, 37
Straight Shaft Burr 36
TTemporal Bone Holder 37
Transverse Tungsten Carbide Straight Shaft Burr 35
Tubing Set 6
Tungsten Carbide Straight Shaft Burr 35, 36
UUNIDRIVE® S III ENT SCB 4
Universal Spray 6
WWire Tray 44
IndexUNIDRIVE® S III ENT SCB
III
1-15
Numerical IndexUNIDRIVE® S III ENT SCB
031131-10 6
20711033 29
20711173 29
20712033 19
252570 32
252571 32
252572 32
252573 30
252574 30
252575 30
252590 31
252591 31
252592 31
252660 21
252661 21
252662 21
252663 21
252671 23
252672 23
252680 20
252681 20
252682 20
252690 22
252691 22
252692 22
253000 43
253001 43
253100 43
253101 43
253200 43
253201 43
253300 43
253301 43
254000 40
254024 40
254025 40
254026 40
254027 40
254028 40
254029 40
254030 40
254031 40
254100 41
254170 41
254171 41
254172 41
254173 41
254174 41
254175 41
254200 41
254235 41
254236 41
254237 41
254300 42
254312 42
254313 42
254314 42
254315 42
254316 42
260000 35
260006 35
260007 35
260008 35
260010 35
260014 35
260018 35
260023 35
260027 35
260031 35
260035 35
260040 35
260045 35
260050 35
260060 35
260070 35
261000 35
261006 35
261007 35
261008 35
261010 35
261014 35
261018 35
261023 35
261027 35
261031 35
261035 35
261040 35
261045 35
261050 35
261060 35
261070 35
261114 35
261123 35
261131 35
261140 35
261150 35
261160 35
262000 35
262006 35
262007 35
262008 35
262010 35
262014 35
262018 35
262023 35
262027 35
262031 35
262035 35
262040 35
262045 35
262050 35
262060 35
262070 35
262200 35
262223 35
262227 35
262231 35
262235 35
262240 35
262245 35
262250 35
262260 35
262270 35
262560 37
262561 37
263050 37
263060 37
263070 37
263518 37
263521 37
263523 37
265050 37
265060 37
265070 37
280030 35, 36, 38
280030 K 36, 38
280033 34, 38
280034 33, 38
280035 38
280040 38
280043 38
280053 6
280053 C 6
280090 37
280120 37
320220 EL 28
320220 SL 28
320230 EL 28
320230 SL 28
320240 EL 28
320240 SL 28
320320 EL 28
320320 SL 28
320330 EL 28
320330 SL 28
320340 EL 28
320340 SL 28
330110 ES 26
330110 M 26
330110 S 26
330120 ES 26
330120 L 26
330120 M 26
330120 S 26
330130 ES 26
IV
Numerical IndexUNIDRIVE® S III ENT SCB
330130 L 26
330130 M 26
330130 S 26
330140 ES 26
330140 L 26
330140 M 26
330140 S 26
330150 ES 26
330150 L 26
330150 M 26
330150 S 26
330160 ES 26
330160 L 26
330160 M 26
330160 S 26
330170 ES 26
330170 L 26
330170 M 26
330170 S 26
330206 ES 26
330206 S 26
330210 ES 26
330210 M 26
330210 S 26
330215 ES 26
330215 S 26
330220 ES 26
330220 L 26
330220 M 26
330220 S 26
330230 ES 26
330230 L 26
330230 M 26
330230 S 26
330240 ES 26
330240 L 26
330240 M 26
330240 S 26
330250 ES 26
330250 L 26
330250 M 26
330250 S 26
330260 ES 26
330260 L 26
330260 M 26
330260 S 26
330270 ES 26
330270 L 26
330270 M 26
330270 S 26
330330 ES 27
330330 L 27
330330 M 27
330330 S 27
330340 ES 27
330340 L 27
330340 M 27
330340 S 27
330350 ES 27
330350 L 27
330350 M 27
330350 S 27
330360 ES 27
330360 L 27
330360 M 27
330360 S 27
330370 ES 27
330370 L 27
330370 M 27
330370 S 27
330440 ES 27
330440 S 27
330460 ES 27
330460 S 27
330511 ES 27
330511 S 27
330526 ES 27
330526 S 27
350110 M 24
350110 S 24
350120 L 24
350120 M 24
350120 S 24
350130 L 24
350130 M 24
350130 S 24
350140 L 24
350140 M 24
350140 S 24
350150 L 24
350150 M 24
350150 S 24
350160 L 24
350160 M 24
350160 S 24
350170 L 24
350170 M 24
350170 S 24
350210 M 24
350210 S 24
350220 L 24
350220 M 24
350220 S 24
350230 L 24
350230 M 24
350230 S 24
350240 L 24
350240 M 24
350240 S 24
350250 L 24
350250 M 24
350250 S 24
350260 L 24
350260 M 24
350260 S 24
350270 L 24
350270 M 24
350270 S 24
350330 L 25
350330 M 25
350330 S 25
350340 L 25
350340 M 25
350340 S 25
350350 L 25
350350 M 25
350350 S 25
350360 L 25
350360 M 25
350360 S 25
350370 L 25
350370 M 25
350370 S 25
350675 M 25
350675 S 25
350690 M 25
350690 S 25
350718 L 25
350718 M 25
350718 S 25
350730 L 25
350730 M 25
350730 S 25
350960 M 25
350960 S 25
350991 M 25
350991 S 25
39550 A 44
39551 A 44
39552 A 44
39552 B 44
39554 A 44
40701601-1 4
40712050 8, 11, 12, 13, 14,15, 16, 17, 18
40712055 8
40712090 9
41200 RA 10, 11, 12, 13
41201 GN 11
41201 KK 11
41201 KKSA 11
41201 KKSB 11
41201 KN 11
41201 KSA 11
41201 LN 11
41201 LSA 11
1-15
V
1-15
Numerical IndexUNIDRIVE® S III ENT SCB
41201 SN 11
41202 KN 12
41203 GNB 13
41203 GNF 13
41203 KKB 13
41203 KKBA 13
41203 KKF 13
41203 KKFA 13
41203 KNB 13
41203 KNF 13
41204 KKB 12
41204 KKBA 12
41204 KKF 12
41204 KKFA 12
41250 RA 8, 10
41301 GN 14
41301 KK 14
41301 KKSA 14
41301 KKSB 14
41301 KN 14
41301 KSA 14
41301 LN 14
41301 LSA 14
41301 LX 18
41301 LXA 18
41301 SN 14
41302 KN 15
41303 DT 17
41303 GNB 16
41303 GNF 16
41303 KKB 16
41303 KKBA 16
41303 KKF 16
41303 KKFA 16
41303 KNB 16
41303 KNF 16
41303 WN 17
41304 KKB 15
41304 KKBA 15
41304 KKF 15
41304 KKFA 15
41304 W 17
41305 D 17
41305 DN 17
41305 DW 17
41305 RN 17
649600 34
649600 HK 36
649600 K 36
649600 L 33
649614 34
649614 HK 36
649614 K 36
649614 L 33
649614 Q 36
649618 34
649618 HK 36
649618 K 36
649618 L 33
649623 34
649623 HK 36
649623 K 36
649623 L 33
649623 Q 36
649627 34
649627 HK 36
649627 K 36
649627 L 33
649631 34
649631 HK 36
649631 K 36
649631 L 33
649631 Q 36
649635 34
649635 HK 36
649635 K 36
649635 L 33
649640 34
649640 HK 36
649640 K 36
649640 L 33
649640 Q 36
649645 34
649645 HK 36
649645 K 36
649645 L 33
649650 34
649650 HK 36
649650 K 36
649650 L 33
649650 Q 36
649660 34
649660 HK 36
649660 K 36
649660 L 33
649660 Q 36
649670 34
649670 HK 36
649670 K 36
649670 L 33
649700 34
649700 G 34
649700 GK 36
649700 GL 33
649700 K 36
649700 L 33
649714 34
649714 K 36
649714 L 33
649718 34
649718 K 36
649718 L 33
649723 34
649723 G 34
649723 GK 36
649723 GL 33
649723 K 36
649723 L 33
649727 34
649727 G 34
649727 GK 36
649727 GL 33
649727 K 36
649727 L 33
649731 34
649731 G 34
649731 GK 36
649731 GL 33
649731 K 36
649731 L 33
649735 34
649735 G 34
649735 GK 36
649735 GL 33
649735 K 36
649735 L 33
649740 34
649740 G 34
649740 GK 36
649740 GL 33
649740 K 36
649740 L 33
649745 34
649745 G 34
649745 GK 36
649745 GL 33
649745 K 36
649745 L 33
649750 34
649750 G 34
649750 GK 36
649750 GL 33
649750 K 36
649750 L 33
649760 34
649760 G 34
649760 GK 36
649760 GL 33
649760 K 36
649760 L 33
649770 34
649770 G 34
649770 GK 36
649770 GL 33
649770 K 36
649770 L 33
660000 39
1
MO
TO
R S
YS
TE
MS
SH
AV
ER
HA
ND
PIE
CE
SH
IGH
-SP
EE
DM
ICR
O M
OT
OR
EC
MIC
RO
MO
TO
R II
WIR
E T
RA
YS
1-15
UNIDRIVE® S III ENT SCB
■ MOTOR SYSTEMS
UNIDRIVE® S III ENT SCB
■ SHAVER HANDPIECES
DrillCut-X® Shaver Handpieces
Shaver Blades
Sinus Burrs
■ HIGH-SPEED MICRO MOTOR
High-Speed Drill Handpieces
High-Speed Burrs
■ EC MICRO MOTOR II
INTRA Drill Handpieces
Burrs
STAMMBERGER-SACHSE Intranasal Drill
Micro Saws
Micro Sagittal Saws, Osseo Scalpels
Micro Compass Saws
Dermatomes
■ WIRE TRAYS FOR CLEANINGAND STERILIZATION
3
MO
TO
R S
YS
TE
MS
Motor SystemsUNIDRIVE® S III ENT SCB
The high-end solution for convenience in the OR
Special Features:● One unit - seven functions
– Shaver– Sinus burr– High-speed micro motor– High-performance EC Micro Motor II– STAMMBERGER-SACHSE intranasal drill– Micro saw– Dermatome
● 2 motor connections● Automated motor recognition● LED color touch screen● Microprocess-controlled, continuously
adjustable speed range● Integrated irrigation pump
1-15
ENT 3
with touch screen
4
MO
TO
R S
YS
TE
MS
ENT 4
UNIDRIVE® S III ENT SCBRecommended Standard Set Configuration
* mtp medical technical promotion gmbh,Take-Off GewerbePark 46, 78579 Neuhausen ob Eck, Germany
40 7016 20-1
40 7016 01-1 UNIDRIVE® S III ENT SCB, motor control unit with color display, touchscreen, two motor outputs, integrated irrigation pump and SCB module,power supply 100 – 240 VAC, 50/60 Hzincluding:Mains CordIrrigator RodTwo-Pedal Footswitch, two-stage, with proportional functionSilicone Tubing Set, for irrigation, sterilizableClip Set, for use with Silicone Tubing Set 20 7116 40SCB Connecting Cable, length 100 cmSingle Use Tubing Set*, sterile, package of 3
1-15
Specifications:
Touch screen
Flow
Power supply
Dimensions w x h x d
Weight
6.4"/300 cd/m2
9 steps
100-240 VAC, 50/60 Hz
300 x 165 x 265 mm
5.2 kg
Certified to
Available languages
IEC 601-1, CE acc. to MDD
German, English, French, Italian, Spanish,Portuguese, Greek, Turkish, Polish, Russian
Components/Spare Parts see catalog ENT
5
MO
TO
R S
YS
TE
MS
ENT 5
UNIDRIVE® S III ENT SCBSystem Components
20 7116 40
Silicone Tubing Set
U N I T S I D E
P A T I E N T S I D E
Shaver Blade
41305 DN
Shaver Blade, curved
41201 KN
41302 KN
Sinus Burr
Two-Pedal Footswitch
20 0166 30
DrillCut-X® II Shaver Handpiece
40 7120 5040 7120 5540 7120 90
High-Speed Micro Motor
20 7120 33
660000
Intranasal Drill
High-performance EC Micro Motor II
20 7110 3320 7111 73
252573 – 252575
INTRA Drill Handpieces, 80,000 rpm
252570 – 252572, 252590 – 252592
INTRA Drill Handpieces, 40,000 rpm
254000 – 254300
Micro Saws
253000 – 253300
Dermatomes
1-15
High-Speed Drill Handpieces, 100,000 rpm
252680 – 252682
252660 – 252663, 252690 – 252692,252671 – 252672
High-Speed Drill Handpieces, 60,000 U/min
6
MO
TO
R S
YS
TE
MS
Optional Accessoriesfor UNIDRIVE® S III ENT
* mtp medical technical promotion gmbh,Take-Off GewerbePark 46, 78579 Neuhausen ob Eck, Germany
031131-10* Tubing Set, for irrigation, for single use, sterile,package of 10
280053 C Spray Nozzle, for the reprocessing of INTRA burr handpieces, foruse with Universal Spray 280053 B
280053 Universal Spray, 6x 500 ml bottles – HAZARDOUS GOODS – UN 1950including:Spray Nozzle
ENT 6
1-15
7
SH
AV
ER
HA
ND
PIE
CE
S
Shaver Handpieces
● Straight suction channel andintegrated irrigationpractically eliminates clogging
● Quick coupling mechanismensures safe work
● Easy hygienic processing● Machine washable
● No obtrusive cable whenworking with DrillCut-X® II
● Particularly ergonomic thanksto variable handle
No clogging Safety/hygiene Convenience/ergonomics
ENT 7
1-15
DrillCut-X® II combines the proven properties of DrillCut-X® with new functions:
● Enhanced ergonomics● Variable handle allows connection with various
handpieces and enables more comfortable work● Reduced-weight design● Greater speed: Oscillation mode for shaver
attachments, max. 10,000 rpm;rotation mode for sinus burrs, max. 12,000 rpm
● Proven DrillCut-X® shaver blade portfolios canbe used
● Shaver-Plus mode for more powerful work thatenables faster ablation of soft tissue.
8
SH
AV
ER
HA
ND
PIE
CE
S
DrillCut-X® II Shaver HandpiecesSpecial Features
ENT 8
1-15
Powerful motor
Absolutely silent running
Enhanced ergonomics
More lightweight design
Oscillation mode for shaver blades, max. 10,000 rpm
Rotation mode for sinus shavers, max. 12,000 rpm
Straight suction channel and integrated irrigation
Quick coupling mechanism facilitates more rapid exchange of work inserts
Use of proven DrillCut-X® blade portfolios possible
Adaption possibilities for navigated Shaver Tracker 40 8001 22
Allows shaver navigation when used NPU 40 8000 01
Variable handle allows connection with various handpieces andenables more comfortable work
Easy hygienic processing, suitable for use in washer andautoclavable at 134° C
Special Features:
●● ●●
●●
●●
●●
●●
●●
●●
●●
●● ●●
– ●●
– ●●
●●
●●
●●
●●
●●
●●
●●
●●
●●
Dri
llCut
-X®II
4071
2050
Dri
llCut
-X®II
N40
7120
55
40 7120 55 DrillCut-X® II N Shaver Handpiece, with adaptionpossibilities for Shaver Tracker 40 8001 22, for usewith UNIDRIVE® S III ECO/ENT/NEURO
40 7120 50 DrillCut-X® II Shaver Handpiece, for usewith UNIDRIVE® S III ECO/ENT/NEURO
40 7120 50
40 7120 55
41250 RA
41250 RA Cleaning Adaptor, LUER-Lock, for cleaningDrillCut-X®/DrillCut-X® II shaver handpieces
Optional accessory:
●●●●
9
SH
AV
ER
HA
ND
PIE
CE
S
Handlefor DrillCut-X® II Shaver Handpieces
40 7120 90
40 7120 90 Handle, adjustable, for use with DrillCut-X® II 40 7120 50and DrillCut-X® II N 40 7120 55
ENT 9
1-15
For use with DrillCut-X® II 40 7120 50 and DrillCut-X® II N 40 7120 55
Special Features:● Ergonomic design● Ultralight construction● Easy handle control allows individual adjustment● Variable mounting options to DrillCut-X® II
or DrillCut-X® II N shaver handpieces
● Easy fixation via rotary lock● Easy hygienic processing, suitable for use
in washer and autoclavable at 134 °C
10
SH
AV
ER
HA
ND
PIE
CE
S
Shaver Blades
ENT 10
1-15
* Can also be used as navigated Shaver Blade with 40712055 DrillCut-X® II N Handpiece
Benefits of shaver blades● Reusable or for single use● Straight working inserts, 360° rotatable
Available in various versions:
Cleaning Adaptor for DrillCut-X® II and Reusable Shaver Blades
Cutting window:● smooth● serrated● double serrated
Sheath:● straight● slightly curved 35°/40°● strongly curved 65°
Diameter:● 2 mm● 3 mm● 4 mm
41204 KKB
41250 RA Cleaning Adaptor, LUER-Lock, forcleaning DrillCut-X®/DrillCut-X® IIshaver handpieces
41200 RA Cleaning Adaptor, LUER-Lock,for cleaning the inner and outerblades of DrillCut-X® accessories
11
SH
AV
ER
HA
ND
PIE
CE
S
Shaver Blades, straightfor Nasal Sinuses and Skull Base Surgery
ENT 11
1-15
For use with DrillCut-X® II
41201 GN
40 7120 50 40 7120 55
serrated cutting edge,diameter 4 mm, color code: blue-red
concave cutting edge, obliquecutting window, diameter 4 mm,color code: blue-black
straight cutting edge,diameter 4 mm,color code: blue-blue
serrated cutting edge,diameter 3 mm,color code: blue-red
concave cutting edge, obliquecutting window, diameter 3 mm,color code: blue-black
Shaver Bladelength 12 cmDetail
40 7120 50 DrillCut-X® II Handpiece
41201 KN
41201 KK *
41201 GN
41201 LN
41201 SN
41201 KSA
double serrated cutting edge,diameter 3 mm,color code: blue-yellow
41201 LSA
double serrated cutting edge,diameter 4 mm,color code: blue-yellow
concave cutting edge, ovalcutting window, diameter 4 mm,color code: blue-green
double serrated cutting edge,diameter 2 mm,color code: blue-yellow
41201 KKSB
Shaver Blades, straight, sterilizable
for use with
41201 KKSA
41200 RA Cleaning Adaptor, LUER-Lock, for cleaning theinner and outer blades of DrillCut-X® accessories
Optional Accessory:
Components/Spare Parts see catalog ENT* Can also be used as navigated Shaver Blade with 40 7120 55 DrillCut-X® II N Handpiece
12
SH
AV
ER
HA
ND
PIE
CE
S
Shaver Blades, curvedfor Nasal Sinuses and Skull Base Surgery
ENT 12
For use with DrillCut-X® II
41204 KKB
curved 35°, cutting edge serratedbackwards, diameter 4 mm,color code: blue-red
curved 40°, cutting edge serratedbackwards, double serrated, diameter 4 mm,color code: blue-yellow
41202 KN
curved 40°, cutting edge serratedforwards, double serrated, diameter 4 mm,color code: blue-yellow
41204 KKF
41204 KKB *
curved 40°, cutting edge serratedforwards, double serrated,diameter 3 mm,color code: blue-yellow
41204 KKFA
41204 KKBA
curved 40°, cutting edge serratedbackwards, double serrated,diameter 3 mm,color code: blue-yellow
Shaver Bladelength 12 cmDetail
40 7120 50 DrillCut-X® II Handpiece
Shaver Blades, curved 35°/40°, sterilizable
for use with
41200 RA Cleaning Adaptor, LUER-Lock, for cleaning theinner and outer blades of DrillCut-X® accessories
Optional accessory:
Components/Spare Parts see catalog ENT* Can also be used as navigated Shaver Blade with 40 7120 55 DrillCut-X® II N Handpiece
40 7120 50 40 7120 55
13
SH
AV
ER
HA
ND
PIE
CE
S
Shaver Blades, curvedfor Nasal Sinuses and Skull Base Surgery
ENT 13
1-15
For use with DrillCut-X® II
41203 KKF
curved 65°, cutting edge serratedforwards, diameter 4 mm,color code: blue-red
curved 65°, cutting edge serratedbackwards, diameter 4 mm,color code: blue-red
41203 KNF
curved 65°, cutting edge serratedforwards, double serrated,diameter 4 mm,color code: blue-yellow
41203 KKF
41203 KNB
curved 65°, cutting edge serratedbackwards, double serrated,diameter 4 mm,color code: blue-yellow
curved 65°, concave cutting edge,oval cutting window, forwardopening, diameter 4 mm, color code: blue-green
curved 65°, concave cutting edge,oval cutting window, backwardopening, diameter 4 mm,color code: blue-green
41203 KKB
41203 KKFA
41203 KKBA
41203 GNF
41203 GNB
curved 65°, cutting edge serratedforwards, double serrated,diameter 3 mm,color code: blue-yellow
curved 65°, cutting edge serratedbackwards, double serrated, diameter 3 mm,color code: blue-yellow
Shaver Bladelength 12 cmDetail
40 7120 50 DrillCut-X® II Handpiece
Shaver Blades, curved 65°, sterilizable
for use with
41200 RA Cleaning Adaptor, LUER-Lock, for cleaning the inner andouter blades of DrillCut-X® accessories
Optional accessory:
Components/Spare Parts see catalog ENT
40 7120 50
14
SH
AV
ER
HA
ND
PIE
CE
S
ENT 14
1-15
Shaver Blades, straightfor Nasal Sinuses and Skull Base Surgery
41301 KK
serrated cutting edge,diameter 4 mm,color code: blue-red
concave cutting edge, obliquecutting window, diameter 4 mm,color code: blue-black
straight cutting edge,diameter 4 mm,color code: blue-blue
serrated cutting edge,diameter 3 mm,color code: blue-red
concave cutting edge, obliquecutting window, diameter 3 mm,color code: blue-black
double serrated cutting edge,diameter 3 mm,color code: blue-yellow
double serrated cutting edge,diameter 4 mm,color code: blue-yellow
concave cutting edge, ovalcutting window, diameter 4 mm,color code: blue-green
41301 KN
41301 KK
41301 GN
41301 LN
41301 SN
41301 KSA
41301 KKSA
41301 LSA
Shaver Bladelength 12 cmDetail
40 7120 50 DrillCut-X® II Handpiece
double serrated cutting edge,diameter 2 mm,color code: blue-yellow
41301 KKSB
for use with
Shaver Blades, straight, , sterile, package of 5for single use
For use with DrillCut-X® II
40 7120 50
15
SH
AV
ER
HA
ND
PIE
CE
S
ENT 15
1-15
Shaver Blades, curvedfor Nasal Sinuses and Skull Base Surgery
For use with DrillCut-X® II
41302 KN
for use withShaver Bladelength 12 cmDetail
40 7120 50 DrillCut-X® II Handpiece
curved 35°, cutting edgeserrated backwards,diameter 4 mm,color code: blue-red
curved 40°, cutting edgeserrated backwards, doubleserrated, diameter 4 mm,color code: blue-yellow
curved 40°, cutting edgeserrated forwards, doubleserrated, diameter 4 mm,color code: blue-yellow
curved 40°, cutting edgeserrated forwards, doubleserrated, diameter 3 mm,color code: blue-yellow
curved 40°, cutting edgeserrated backwards, doubleserrated, diameter 3 mm,color code: blue-yellow
Shaver Blades, curved 35°/40°, , sterile, package of 5for single use
41302 KN
41304 KKF
41304 KKB
41304 KKFA
41304 KKBA
40 7120 50
16
SH
AV
ER
HA
ND
PIE
CE
S
ENT 16
1-15
Shaver Blades, curvedfor Nasal Sinuses and Skull Base Surgery
41303 KKB
For use with DrillCut-X® II
Shaver Blades, curved 65°, , sterile, package of 5for single use
41303 KNF
41303 KKF
41303 KNB
41303 KKB
41303 KKFA
41303 KKBA
41303 GNF
41303 GNB
curved 65°, cutting edgeserrated forwards,diameter 4 mm,color code: blue-red
curved 65°, cutting edgeserrated backwards,diameter 4 mm,color code: blue-red
curved 65°, cutting edgeserrated forwards, doubleserrated, diameter 4 mm,color code: blue-yellow
curved 65°, cutting edgeserrated backwards, doubleserrated, diameter 4 mm,color code: blue-yellow
curved 65°, cutting edgeconcave forwards,oval cutting window,diameter 4 mm,color code: blue-green
curved 65°, cutting edgeconcave backwards,oval cutting window,diameter 4 mm,color code: blue-green
curved 65°, cutting edgeserrated forwards, doubleserrated, diameter 3 mm,color code: blue-yellow
curved 65°, cutting edgeserrated backwards,double serrated,diameter 3 mm,color code: blue-yellow
Shaver Bladelength 12 cmDetail
for use with
40 7120 50 DrillCut-X® II Handpiece
40 7120 50
17
SH
AV
ER
HA
ND
PIE
CE
S
ENT 17
1-15
Sinus Burrs, curvedfor Nasal Sinuses and Skull Base Surgery
* Can also be used as navigated Shaver Blade with 40712055 DrillCut-X® II N Handpiece
For use with DrillCut-X® II
41305 RN
Sinus Burrs, curved 70°/55°/40°/15°, , sterile, package of 5for single use
41303 WN
41303 DT *
41304 W
41305 RN
41305 DN
41305 D *
Shaver Bladelength 12 cmDetail
40 7120 50 DrillCut-X® II Handpiece
for use with
curved 55°, cylindric,drill diameter 3.6 mm,shaft diameter 4 mm,color code: red-blue
curved 15°, bud drill,drill diameter 4 mm,shaft diameter 4 mm,color code: red-black
curved 15°, diamond head,drill diameter 3 mm,shaft diameter 4 mm,color code: red-yellow
curved 70°, diamond head,drill diameter 3.6 mm,shaft diameter 4 mm,color code: red-yellow
curved 40°, cylindric,drill diameter 3 mm,shaft diameter 4 mm,color code: red-blue
curved 15°, diamond head,drill diameter 5 mm,shaft diameter 4 mm,color code: red-yellow
41305 DW *
curved 40°, diamond head, drill diameter 5 mm,shaft diameter 4 mm,color code: red-yellow
40 7120 50 40 7120 55
18
SH
AV
ER
HA
ND
PIE
CE
S
ENT 18
1-15
Larynx Shaver Blades,distally and proximally curvedfor larynx surgery
For use with DrillCut-X® II
Shaver Blades, distally curved 18°, proximally curved 30°, ,sterile, package of 5
for single use
41301 LX
41301 LXA
distally curved 18°,proximally curved 30°,oval cutting edge,oval cutting window,diameter 4 mm,color code: blue-green
distally curved 18°,proximally curved 30°,oval cutting edge,oval cutting window,diameter 3 mm,color code: blue-green
Shaver Bladelength 22 cmDetail
for use with
40 7120 50 DrillCut-X® II Handpiece
41301LXA 40 7120 50
19
HIG
H-S
PE
ED
MIC
RO
MO
TO
R
ENT 19
1-15
High-Speed Micro Motor
● Brushless high-speed micro motor● Smallest possible dimensions● Autoclavable● Can be processed in a cleaning machine
● Maximum torque 6 Ncm● Number of revolutions can be continuously
adjusted up to 60,000 rpm● Possible to adjust the number of revolutions to
100,000 rpm with the appropriate handle
Special Features:
20 7120 33
20 7120 33 High-Speed Micro-Motor, max. speed 60,000 rpm,including connecting cable, for use withUNIDRIVE® S III ENT/NEURO
20
HIG
H-S
PE
ED
MIC
RO
MO
TO
R
ENT 20
1-15
High-Speed Handpiecesangled, 100,000 rpm
For use with high-speed drills and High-Speed Micro Motor 20 7120 33
100,000 rpm
diameter 7.5 mm
252680 High-Speed Handpiece, short, angled, 100,000 rpm, for use withHigh-Speed Micro-Motor 20 7120 33
252681 High-Speed Handpiece, medium, angled, 100,000 rpm, for usewith High-Speed Micro-Motor 20 7120 33
252682 High-Speed Handpiece, long, angled, 100,000 rpm, for use withHigh-Speed Micro-Motor 20 7120 33
252681
252682
53 mm
252680
33 mm
93 mm
7.5 mm
7.5 mm
7.5 mm
20 7120 33
High-Speed Drills see pages 24-25High-Speed Micro Motor 20 7120 33 see page 19
21
HIG
H-S
PE
ED
MIC
RO
MO
TO
R
ENT 21
1-15
High-Speed Handpiecesangled, 60,000 rpm
20 7120 33
For use with high-speed drillsand with High-Speed Micro Motor 20 7120 33
60,000 rpm
diameter 5.5 mm
High-Speed Drills see pages 26-27High-Speed Micro Motor 20 7120 33 see page 19
252660 High-Speed Handpiece, extra short, angled, 60,000 rpm, for use withHigh-Speed Micro-Motor 20 7120 33
252661 High-Speed Handpiece, short, angled, 60,000 rpm, for use withHigh-Speed Micro-Motor 20 7120 33
252662 High-Speed Handpiece, medium, angled, 60,000 rpm, for use withHigh-Speed Micro-Motor 20 7120 33
252661
252662
51 mm
252660
31 mm
71 mm
252663 High-Speed Handpiece, long, angled, 60,000 rpm, for use withHigh-Speed Micro-Motor 20 7120 33
252663
91 mm
5.5 mm
5.5 mm
5.5 mm
5.5 mm
22
HIG
H-S
PE
ED
MIC
RO
MO
TO
R
High-Speed Drills see pages 26-27High-Speed Micro Motor 20 7120 33 see page 19
20 7120 33
High-Speed Handpiecesstraight, 60,000 rpm
For use with high-speed drillsand with High-Speed Micro Motor 20 7120 33
60,000 rpm
diameter 5.5 mm
252690 High-Speed Handpiece, extra short, straight, 60,000 rpm,for use with High-Speed Micro-Motor 20 7120 33
252691 High-Speed Handpiece, short, straight, 60,000 rpm,for use with High-Speed Micro-Motor 20 7120 33
252692 High-Speed Handpiece, medium, straight, 60,000 rpm,for use with High-Speed Micro-Motor 20 7120 33
252691
252692
51 mm
252690
31 mm
71 mm
5.5 mm
5.5 mm
5.5 mm
ENT 22
1-15
23
HIG
H-S
PE
ED
MIC
RO
MO
TO
R
High-Speed Drills see page 28High-Speed Micro Motor 20 7120 33 see page 19
High-Speed Handpiecesmalleable, slim, angled, 60,000 rpm
For use with high-speed drillsand with High-Speed Micro Motor 20 7120 33
60,000 rpm
diameter 4.7 mm
malleable
The handpieces have malleable shafts that can be bent upto 20° according to user requirements.
20 7120 33
252671 High-Speed Handpiece, extra long, malleable, slim, angled, 60,000 rpm,for use with High-Speed Micro-Motor 20 7120 33
252672 High-Speed Handpiece, super long, malleable, slim, angled, 60,000 rpm,for use with High-Speed Micro-Motor 20 7120 33
252672
128 mm
252671
108 mm
4.7 mm
4.7 mm
ENT 23
1-15
24
HIG
H-S
PE
ED
MIC
RO
MO
TO
R
ENT 24
1-15
High-Speed Standard Burrs,High-Speed Diamond Burrs
For use with High-Speed Handpieces, 100,000 rpm
252680 252681 252682
short medium long
High-Speed Standard Burrs, 100,000 rpm, ,sterile, package of 5
for single use
Diameter in mm
1
short
350110 S
medium long
350110 M –
2 350120 S 350120 M 350120 L
3 350130 S 350130 M 350130 L
4 350140 S 350140 M 350140 L
5 350150 S 350150 M 350150 L
6 350160 S 350160 M 350160 L
7 350170 S 350170 M 350170 L
High-Speed Diamond Burrs, 100,000 rpm, ,sterile, package of 5
for single use
Diameter in mm
1
short
350210 S
medium long
350210 M –
2 350220 S 350220 M 350220 L
3 350230 S 350230 M 350230 L
4 350240 S 350240 M 350240 L
5 350250 S 350250 M 350250 L
6 350260 S 350260 M 350260 L
7 350270 S 350270 M 350270 L
100,000 rpm
diameter 7.5 mm
High-Speed Handpieces, 100,000 rpm see page 20
25
HIG
H-S
PE
ED
MIC
RO
MO
TO
R
ENT 25
1-15
short medium long
High-Speed Diamond Burrs, High-SpeedAcorns, High-Speed Barrel Burrs,High-Speed Neuro Fluted Burrs
For use with High-Speed Handpieces, 100,000 rpm
252680 252681 252682
High-Speed Coarse Diamond Burrs, 100,000 rpm, ,sterile, package of 5
for single use
Diameter in mm
3
short
350330 S
medium long
350330 M 350330 L
4 350340 S 350340 M 350340 L
5 350350 S 350350 M 350350 L
6 350360 S 350360 M 350360 L
7 350370 S 350370 M 350370 L
High-Speed Acorns, 100,000 rpm, ,sterile, package of 5
for single use
Diameter in mm
7.5
short
350675 S
medium
350675 M
9 350690 S 350690 M
High-Speed Barrel Burrs, 100,000 rpm, ,sterile, package of 5
for single use
Diameter in mm
6
short
350960 S
medium
350960 M
9.1 350991 S 350991 M
High-Speed Neuro Fluted Burrs, 100,000 rpm, ,sterile, package of 5
for single use
Diameter in mm
1.8
short
350718 S
medium
350718 M
3 350730 S 350730 M
long
350718 L
350730 L
100,000 rpm
diameter 7.5 mm
High-Speed Handpieces, 100,000 rpm see page 20
26
HIG
H-S
PE
ED
MIC
RO
MO
TO
R
ENT 26
1-15
High-Speed Standard Burrs,High-Speed Diamond Burrs
For use with High-Speed Handpieces, 60,000 rpm
252660 252661 252662
252690 252691 252692
252663
extra short short medium
extra short short medium
long
High-Speed Standard Burrs, 60,000 rpm, ,sterile, package of 5
for single use
Diameter in mm
1
extra short
330110 ES
short medium
330110 S 330110 M
2 330120 ES 330120 S 330120 M
3 330130 ES 330130 S 330130 M
4 330140 ES 330140 S 330140 M
5 330150 ES 330150 S 330150 M
6 330160 ES 330160 S 330160 M
7 330170 ES 330170 S 330170 M
High-Speed Diamond Burrs, 60,000 rpm, ,sterile, package of 5
for single use
Diameter in mm
0.6
extra short
330206 ES
short medium
330206 S –
1 330210 ES 330210 S 330210 M
1.5 330215 ES 330215 S –
2 330220 ES 330220 S 330220 M
3 330230 ES 330230 S 330230 M
4 330240 ES 330240 S 330240 M
5 330250 ES 330250 S 330250 M
long
–
330120 L
330130 L
330140 L
330150 L
330160 L
330170 L
long
–
–
–
330220 L
330230 L
330240 L
330250 L
6 330260 ES 330260 S 330260 M 330260 L
7 330270 ES 330270 S 330270 M 330270 L
60,000 rpm
diameter 5.5 mm
High-Speed Handpieces, 60,000 rpm see pages 21-23
27
HIG
H-S
PE
ED
MIC
RO
MO
TO
R
ENT 27
1-15
extra short short medium
extra short short medium long
High-Speed Diamond Burrs,High-Speed Cylinder Burrs,LINDEMANN High-Speed Fluted Burrs
For use with High-Speed Handpieces, 60,000 rpm
High-Speed Coarse Diamond Burrs, 60,000 rpm, , sterile, package of 5
for single use
Diameter in mm
3
extra short
330330 ES
short medium
330330 S 330330 M
4 330340 ES 330340 S 330340 M
5 330350 ES 330350 S 330350 M
6 330360 ES 330360 S 330360 M
7 330370 ES 330370 S 330370 M
long
330330 L
330340 L
330350 L
330360 L
330370 L
High-Speed Cylinder Burrs, 60,000 rpm, ,sterile, package of 5
for single use
Diameter in mm
4
extra short
330440 ES
short
330440 S
6 330460 ES 330460 S
LINDEMANN High-Speed Fluted Burrs, 60,000 rpm, ,sterile, package of 5
for single use
Size in mm(diameter x length)
Diameter 2.1/11
extra short
330511 ES
short
330511 S
Diameter 2.3/26 330526 ES 330526 S
252660 252661 252662
252690 252691 252692
252663
60,000 rpm
diameter 5.5 mm
High-Speed Handpieces, 60,000 rpm see pages 21-23
28
HIG
H-S
PE
ED
MIC
RO
MO
TO
R
ENT 28
1-15
High-Speed Diamond Burrs
For use with High-Speed Handpieces, 60,000 rpm
252671 252672
extra long super long
High-Speed Diamond Burrs, 60,000 rpm, ,sterile, package of 5
for single use
Diameter in mm
2
extra long
320220 EL
super long
320220 SL
3 320230 EL 320230 SL
4 320240 EL 320240 SL
High-Speed Coarse Diamond Burrs, 60,000 rpm, ,sterile, package of 5
for single use
Diameter in mm
2
extra long
320320 EL
super long
320320 SL
3 320330 EL 320330 SL
4 320340 EL 320340 SL
60,000 rpm
diameter 4.7 mm
High-Speed Handpieces, 60,000 rpm see pages 21-23
29
EC
MIC
RO
MO
TO
R II
ENT 29
1-15
High-Performance EC Micro Motor IIwith INTRA Coupling
● Self-cooling, brushless high-performanceEC micro motor
● Smallest possible dimensions● Autoclavable● Can be processed in a cleaning machine● Detachable connecting cable
● INTRA coupling enables a wide variety ofapplications
● Maximum torque 4 Ncm● Number of revolutions can be continuously
adjusted up to 40,000 rpm● Possible to adjust the number of revolutions to
80,000 rpm with the appropriate handle
20 7110 33
20 7110 33 High-Performance EC Micro Motor II, for use withUNIDRIVE® II/UNIDRIVE® ENT/OMFS/NEURO/ECOand Connecting Cable 20 7110 73, or for use withUNIDRIVE® S III ENT/ECO/NEURO andConnecting Cable 20 7111 73
Special Features:
20 7111 73 Connecting Cable, to connect High-Performance EC MicroMotor II 20 7110 33 to UNIDRIVE® S III ENT/ECO/NEURO
30
EC
MIC
RO
MO
TO
R II
ENT 30
1-15
INTRA Drill Handpieces80,000 rpm, angled
Special Features:● Tool-free closing and opening of the drill● Right/left rotation● Max. rotating speed 80,000 rpm● Detachable irrigation tubes● Lightweight construction
● Low-vibration operation● Low maintenance● Can be processed in a cleaning machine● Safe grip
252573 INTRA Drill Handpiece, angled, length 12.5 cm,transmission 1:2 (80,000 rpm), for use with high-performance EC micro motor II and straight shaft burrs
252574 INTRA Drill Handpiece, angled, length 15 cm,transmission 1:2 (80,000 rpm), for use with high-performance EC micro motor II and straight shaft burrs
252575 INTRA Drill Handpiece, angled, length 18 cm,transmission 1:2 (80,000 rpm), for use with high-performance EC micro motor II and straight shaft burrs
252574
252575
252573
High-Performance EC Micro Motor II 20 7110 33 and Connecting Cable 20 7111 73 see page 29
31
EC
MIC
RO
MO
TO
R II
ENT 31
1-15
INTRA Drill Handpieces40,000 rpm, straight
Special Features:● Tool-free closing and opening of the drill● Right/left rotation● Max. rotating speed 40,000 rpm● Detachable irrigation tubes● Lightweight construction
● Low-vibration operation● Low maintenance● Can be processed in a cleaning machine● Safe grip
High-Performance EC Micro Motor II 20 7110 33 and Connecting Cable 20 7111 73 see page 29
252590 INTRA Drill Handpiece, straight, length 11 cm,transmission 1:1 (40,000 rpm), for use with high-performance EC micro motor II and straight shaft burrs
252591 INTRA Drill Handpiece, straight, length 13 cm,transmission 1:1 (40,000 rpm), for use with high-performance EC micro motor II and straight shaft burrs
252592 INTRA Drill Handpiece, straight, length 17 cm,transmission 1:1 (40,000 rpm), for use with high-performance EC micro motor II and straight shaft burrs
252591
252592
252590
32
EC
MIC
RO
MO
TO
R II
252570 INTRA Drill Handpiece, angled, length 12.5 cm,transmission 1:1 (40,000 rpm), for use with high-performance EC micro motor II and straight shaft burrs
252571 INTRA Drill Handpiece, angled, length 15 cm,transmission 1:1 (40,000 rpm), for use with high-performance EC micro motor II and straight shaft burrs
252572 INTRA Drill Handpiece, angled, length 18 cm,transmission 1:1 (40,000 rpm), for use with high-performance EC micro motor II and straight shaft burrs
252571
252572
252570
INTRA Drill Handpieces40,000 rpm, angled
Special Features:● Tool-free closing and opening of the drill● Right/left rotation● Max. rotating speed 40,000 rpm● Detachable irrigation tubes● Lightweight construction
● Low-vibration operation● Low maintenance● Can be processed in a cleaning machine● Safe grip
High-Performance EC Micro Motor II 20 7110 33 and Connecting Cable 20 7111 73 see page 29
ENT 32
1-15
33
EC
MIC
RO
MO
TO
R II
Straight Shaft BurrsLength 12.5 cm
ENT 33
1-15
280034 Rack, for 36 straight shaft burrs with a length of 12.5 cm, foldable,sterilizable, size 22 x 17 x 2 cm
12.5 cm
SizeDetail Diameterin mm
Standard Diamond Diamond,coarse
014 1.4
018 1.8
023 2.3
027 2.7
031 3.1
035 3.5
040 4
045 4.5
050 5
060 6
649614 L
649618 L
649623 L
649627 L
649631 L
649635 L
649640 L
649645 L
649650 L
649660 L
649714 L –
–649718 L
649723 L
649727 L
649731 L
649735 L
649740 L
649745 L
649750 L
649760 L
649723 GL
649727 GL
649731 GL
649735 GL
649740 GL
649745 GL
649750 GL
649760 GL
070 7 649670 L 649770 L 649770 GL
sterilizable sterilizable sterilizable
649600 L Standard Straight Shaft Burr, stainless, size 014 – 070,length 12.5 cm, set of 11
649700 GL Rapid Diamond Straight Shaft Burr, stainless, with coarsediamond coating for precise drilling and abrasion withouthand pressure and generating minimal heat, sizes 023 – 070,length 12.5 cm, set of 9,color code: gold
649700 L Diamond Straight Shaft Burr, stainless, size 014 – 070,length 12.5 cm, set of 11
For use with INTRA Drill Handpieces 252592, 252572, 252575
34
EC
MIC
RO
MO
TO
R II
Straight Shaft BurrsLength 9.5 cm
ENT 34
1-15
For use with INTRA Drill Handpieces 252591, 252571, 252574
SizeDetail Diameterin mm Standard Diamond Diamond,
coarse
014 1.4
018 1.8
023 2.3
027 2.7
031 3.1
035 3.5
040 4
045 4.5
050 5
060 6
649614
649618
649623
649627
649631
649635
649640
649645
649650
649660
649714 –
–649718
649723
649727
649731
649735
649740
649745
649750
649760
649723 G
649727 G
649731 G
649735 G
649740 G
649745 G
649750 G
649760 G
070 7 649670 649770 649770 G
649700 Diamond Straight Shaft Burr, stainless, size 014 – 070,length 9.5 cm, set of 11
649700 G Rapid Diamond Straight Shaft Burr, stainless, with coarse diamondcoating for precise drilling and abrasion without hand pressure andgenerating minimal heat, size 023 – 070, length 9.5 cm, set of 9,color code: gold
280033 Rack, for 36 straight shaft burrs with a length of 9.5 cm, foldable,sterilizable, size 22 x 14 x 2 cm
9.5 cm
649600 Standard Straight Shaft Burr, stainless, size 014 – 070,length 9.5 cm, set of 11
35
EC
MIC
RO
MO
TO
R II
Straight Shaft BurrsLength 7 cm
ENT 35
1-15
SizeDetail Diameterin mm Standard Tungsten
Carbide
TransverseTungstenCarbide
014 1.4
018 1.8
023 2.3
027 2.7
031 3.1
035 3.5
040 4
045 4.5
050 5
060 6
261014
261018
261023
261027
261031
261035
261040
261045
261050
261060
261123
–
261131
–
261140
–
261150
261160
Diamond Diamond,coarse
007 0.7 261007 – –
008 0.8 261008 – –
010 1 261010 –
261114
–
–
–
–
006 0.6 261006 – –
262223
262227
262231
262235
262240
262245
262250
262260
070 7
260014
260018
260023
260027
260031
260035
260040
260045
260050
260060
260007
260008
260010
260006
260070 261070 –
262014
262007
262008
262010
262006
262018
262023
262027
262031
262035
262040
262045
262050
262060
262070 262270
7 cm
260000 Standard Straight Shaft Burr, stainless, sizes 006 – 070,length 7 cm, set of 15
261000 Tungsten Carbide Straight Shaft Burr, stainless, sizes 006 – 070,length 7 cm, set of 15
262000 Diamond Straight Shaft Burr, stainless, sizes 006 – 070,length 7 cm, set of 15
262200 Rapid Diamond Straight Shaft Burr, stainless, with coarse diamondcoating for precise drilling and abrasion without hand pressure andgenerating minimal heat, sizes 023 – 070, length 7 cm, set of 9,color code: gold
For use with INTRA Drill Handpieces 252590, 252570, 252573
280030 Rack, for 36 straight shaft burrs with a length of 7 cm, foldable,sterilizable, size 22 x 11.5 x 2 cm
36
EC
MIC
RO
MO
TO
R II
Straight Shaft BurrsLength 5.7 cm
ENT 36
1-15
649600 K Standard Straight Shaft Burr, stainless, sizes 014 – 070,length 5.7 cm, set of 11
649600 HK Tungsten Carbide Straight Shaft Burr, stainless, sizes 014 – 070,length 5.7 cm, set of 11
649700 K Diamond Straight Shaft Burr, stainless, sizes 014 – 070,length 5.7 cm, set of 11
649700 GK Rapid Diamond Straight Shaft Burr, stainless, with coarsediamond coating for precise drilling and abrasion withouthand pressure and generating minimal heat, sizes 023 – 070,length 5.7 cm, set of 9,color code: gold
For use with INTRA Drill Handpieces 252590, 252570, 252573
280030 Rack, for 36 straight shaft burrs with a length of 7 cm, foldable,sterilizable, size 22 x 11.5 x 2 cm
280030 K Metal Bar, for fixation at Rack 280030, to hold 18 burrs with a lengthof 7 cm and 16 burrs with a length of 5.7 cm, size 16 x 2.5 x 1 cm
5.7 cm
SizeDetail Diameterin mm Standard Tungsten
Carbide Diamond Diamond,coarse
014 1.4
018 1.8
023 2.3
027 2.7
031 3.1
035 3.5
040 4
045 4.5
050 5
060 6
649614 K
649618 K
649623 K
649627 K
649631 K
649635 K
649640 K
649645 K
649650 K
649660 K
649714 K
649718 K
649723 K
649727 K
649731 K
649735 K
649740 K
649745 K
649750 K
649760 K
649723 GK
–
–
649727 GK
649731 GK
649735 GK
649740 GK
649745 GK
649750 GK
649760 GK
070 7 649670 K
649614 HK
649618 HK
649623 HK
649627 HK
649631 HK
649635 HK
649640 HK
649645 HK
649650 HK
649660 HK
649670 HK
TransverseTungstenCarbide
649614 Q
–
649623 Q
–
649631 Q
–
649640 Q
–
649650 Q
649660 Q
– 649770 K 649770 GK
37
EC
MIC
RO
MO
TO
R II
Burrs and Accessories
ENT 37
1-15
Straight Shaft Burrs, cylindrical, barrel-shaped, and bud-shaped, length 7 cm
LINDEMANN Burrs, conical, stainless, length 7 cm
Size Diameterin mm
conical
018 1.8
021 2.1
023 2.3
263518
263521
263523
sterilizable
Size Diameterin mm cylindrical barrel-shaped bud-shaped
050 5
060 6
070
040
7
4
265050 –
–
–
262561–
020 2 262560 –
–
263050
263060
263070
–
265060
265070
265050 – 265070
280090 280120
280120 Temporal Bone Holder, bowl-shaped, with3 fixation screws for tensioning the petrosal boneand with evacuation tube for irrigation liquid
280090 Size Template, for drills, stainless steel,sterilizable
38
EC
MIC
RO
MO
TO
R II
Accessories for Burrs
ENT 38
1-15
Please note: The burrs displayed are not included in the rack.
280030 Rack, for 36 straight shaft burrs with a length of 7 cm,foldable, sterilizable, size 22 x 11.5 x 2 cm
280030
280033280034
280040280043
280033 Rack, for 36 straight shaft burrs with a length of 9.5 cm,foldable, sterilizable, size 22 x 14 x 2 cm
280034 Rack, for 36 straight shaft burrs with a length of 12.5 cm,foldable, sterilizable, size 22 x 17 x 2 cm
280040 Rack, flat model, to hold 21 straight shaft burrswith a length of up to 6 cm (6 pcs) and 7 cm (15 pcs),foldable, sterilizable, size 17.5 x 9.5 x 1.2 cm
280043 Rack, flat model, to hold 21 straight shaft burrswith a length of 7 cm (6 pcs) and 9.5 cm (15 pcs),foldable, sterilizable, size 17.5 x 11.5 x 1.2 cm
280035
280030 K Metal Bar, for fixation at Rack 280030, to hold 18 burrswith a length of 7 cm and 16 burrs with a length of 5.7 cm,size 16 x 2.5 x 1 cm
280030 K
280035 Rack, for 54 straight shaft burrs with a length of 5 cm (36 pcs)and 7 cm (18 pcs), foldable, sterilizable, size 22 x 12.5 x 3 cm
39
EC
MIC
RO
MO
TO
R II
STAMMBERGER-SACHSE Intranasal Drill
660074 SK
660000 A/T 660074 SK
Special Features:● Allows atraumatic grinding of the osseous canal
of the optic nerve under endoscopic control● Direct endoscopic view of diamond abradors and
operation area● No fixed coupling to the endoscope makes
independent manipulation possible● The abrador is retracted into the guide sheath
for protection of tissue and endoscope duringintroduction
660000 STAMMBERGER-SACHSE Intranasal Drill, for decompression of theoptic nerve and for fine grinding work in ethmoidal skull base area, foruse with EC micro motorincluding:Double Ring Sliding Handle, for moving abrador forwards andbackwards in the guiding sheath, with fixed INTRA drill handpieceGuide Sheath, outer diameter 5 mm, with irrigation stopcockDiamond Abrador, delicate, spherical, diameter 2.5 mmDiamond Abrador, delicate, spherical, diameter 3 mmDiamond Abrador, delicate, conical, from diameter 2.5 mmto diameter 3 mm
ica = Arteria carotis internaaep = Arteria ethmoidalis posterior
on = Nervus opticusx = Tuberculum opticum
z = Anulus zinnii
● Pressure on the sliding handle enablescontrolled advance of the abrador and precisegrinding work under endoscopic control
● The guide sheath remains stationary; only theabradors rotate
● No damage to mucous membrane due tounprotected rotating drive mechanisms
660074 SF
660074 SG
High-Performance EC Micro Motor II 20 7110 33 and Connecting Cable 20 7111 73 see page 29
20 7110 33/20 7111 73
Components/Spare Parts see catalog ENT
ENT 39
1-15
40
EC
MIC
RO
MO
TO
R II
Micro Saws, oscillating
254000
Saw Blades, short shaft, for use with 254000
Saw Blades, long shaft, for use with 254000
254000 Oscillating Micro Saw, inbuilt irrigation tube, recommended maximumspeed 15,000 rpm corresponds to 15,000 oscillations/min., without sawblades, with fork wrench
254024 Saw Blade, short shaft, blade thickness 0.3 mm,width of blade 6 mm, working length 11 mm,package of 1, for use with 254000
254025 Same, width of blade 10 mm
254026 Same, width of blade 15 mm
254030 Same, blade thickness 0.15 mm, width of blade 6 mm
254028 Same, width of blade 10 mm
254029 Same, width of blade 15 mm
254031 Same, blade thickness 0.15 mm, width of blade 6 mm
254027 Saw Blade, long shaft, blade thickness 0.3 mm, widthof blade 6 mm, working length 26 mm, package of 1,for use with 254000
20 7110 33/20 7111 73
High-Performance EC Micro Motor II 20 7110 33 and Connecting Cable 20 7111 73 see page 29
ENT 40
1-15
Components/Spare Parts see catalog ENT
41
EC
MIC
RO
MO
TO
R II
High-Performance EC Micro Motor II 20 7110 33 and Connecting Cable 20 7111 73 see page 29
Micro Sagittal Saw, Osseo Scalpel
254100
254200
Saw Blades, for use with 254100
Saw Blades, for use with 254200
254170 Saw Blade, blade thickness 0.35 mm, width of blade4 mm, working length 10 mm, package of 12, for usewith Micro Sagittal Saw 254100
254171 Same, width of blade 6 mm, working length 10 mm
254172 Same, width of blade 6 mm, working length 15 mm
254173 Same, width of blade 10 mm, working length 15 mm
254174 Same, width of blade 12 mm, working length 27 mm
254175 Same, width of blade 6 mm, working length 10 mm
254200 Osseo Scalpel, Micro Saw, with axial/sagittal cut, pendulum stroke,especially appropriate for 3-dimensional incision guiding, integratedirrigation tube, recommended maximum speed 20,000 rpm, withoutsaw blades, with fork wrench
254235 Saw Blade, blade thickness 0.35 mm, working length12 mm, package of 12, for use with Osseo Scalpel,Micro Saw 254200
254236 Same, working length 18 mm
254237 Same, working length 24 mm
254100 Micro Sagittal Saw, integrated irrigation tube, recommendedmaximum speed 20,000 rpm, without saw blades, with fork wrench
20 7110 33/20 7111 73
20 7110 33/20 7111 73
ENT 41
1-15
Components/Spare Parts see catalog ENT
42
EC
MIC
RO
MO
TO
R II
Micro Compass Saws
254300
Saw Blades, for use with 254300
254300 Micro Compass Saw, detachable irrigation tube, recommendedmaximum speed 15,000 rpm, without saw blades, with fork wrench
254312 Saw Blade, blade thickness 0.25 mm, workinglength 11 mm, package of 12, for use with 254300
254313 Same, working length 14 mm
254314 Same, working length 18 mm
254315 Same, working length 22 mm
254316 Same, working length 26 mm
20 7110 33/20 7111 73
High-Performance EC Micro Motor II 20 7110 33 and Connecting Cable 20 7111 73 see page 29
ENT 42
1-15
Components/Spare Parts see catalog ENT
43
EC
MIC
RO
MO
TO
R II
High-Performance EC Micro Motor II 20 7110 33 and Connecting Cable 20 7111 73 see page 29
Dermatomes
ENT 43
1-15
Special Features:● For removing skin and mucosa ● Dermaplaning for obtaining small pieces of skin
from behind the ear● Can be easily adapted to motor● Optimal setting of the incision depth● Lightweight construction
253000 Dermatome, with INTRA coupling, width of incision12 mm, recommended maximum speed 8000 rpm
253001 Replacement Blade, for Dermatome 253000,width of incision 12 mm, sterile, package of 10
253100 Dermatome, with INTRA coupling, width of incision25 mm, recommended maximum speed 8000 rpm
253101 Replacement Blade, for Dermatome 253100,width of incision 25 mm, sterile, package of 10
253200 Dermatome, with INTRA coupling, width of incision50 mm, recommended maximum speed 8000 rpm
253201 Replacement Blade, for Dermatome 253200,width of incision 50 mm, sterile, package of 10
253300 Dermatome, with INTRA coupling, width of incision75 mm, recommended maximum speed 8000 rpm
253301 Replacement Blade, for Dermatome 253300,width of incision 75 mm, sterile, package of 10
253000
253100
253200
253300
20 7110 33/20 7111 73
44
WIR
E T
RA
YS
Wire Trays for Cleaning and Sterilization
39550 A Wire Tray, provides safe storage ofaccessories for KARL STORZ paranasalsinus shaver systems during cleaning andsterilizationfor storage of:– Up to 7 shaver attachments– Connecting cable
39554 A Wire Tray, provides safe storage ofaccessories for the KARL STORZ dermatomesystem during cleaning and sterilizationfor storage of:– Up to 2 dermatomes– Connecting cable– EC micro motor with INTRA coupling
39551 A Wire Tray, provides safe storage ofaccessories for the KARL STORZ intranasaldrill system during cleaning and sterilizationfor storage of:– Intranasal drill– Connecting cable– EC micro motor– Up to 10 diamond abradors
39552 A Wire Tray, provides safe storage ofaccessories for KARL STORZ drilling/grindingsystems during cleaning and sterilization,includes tray for small parts, for use withRack 280030, rack not includedfor storage of: – Up to 6 drill handpieces– Connecting cable– EC micro motor– Small parts
39552 B Wire Tray, provides safe storage ofaccessories for KARL STORZ drilling/grindingsystems during cleaning and sterilization,includes tray for small parts, for use withRack 280030, rack includedfor storage of: – Up to 6 drill handpieces– Connecting cable– EC micro motor– Up to 36 drill bits and burrs– Small parts
39550 A
39551 A
39552 B
39554 A
Please note: The instruments displayed are not included in the trays.
Tray for small parts included
ENT 44
1-15
Request per Business Reply Cardor per FAX+49 (0)7461 708 404 or one of KARL STORZ distribution companies– checkmark – provide address on back of card – send –
Catalogs, Catalog excerpts
I prefer: Print Version Digital Version (CD, DVD) (please check)
Address:
Hospital/Office
Contact
Street
Postal Code
Town/City
Tel.
REPLY
KARL STORZ & Co. KG
Postfach 230
78503 Tuttlingen/Germany
Postagepaid
Please tear off postcard here!
Please tear off postcard here!
✂
✂
✂
Laparoscopy in Surgery, Gynecology, Urology
- Pediatric Laparoscopy
- Minilaparoscopy
Gynecology
- Fetoscopy
Urology
Proctology
Arthroscopy, Sports Medicine,Spine Surgery
- RECON – Bone and Joint Reconstruction
Microscopy
Pediatric Surgery
KARL STORZ OR1 NEO®
Telepresence
Hygiene
Neurosurgery
Oral and Maxillofacial Surgery
ENT – Esophagoscopy – Bronchoscopy
- Standard Instruments
- Laryngology
- Otology
- Rhinology and Rhinoplasty
- Sinoscopy, Rhinoscopy, Postrhinoscopy
Plastic Surgery
Anesthesiology and Emergency Medicine
- Video Intubation Systems
Endoscopes and Instruments
for Cardiovascular Surgery
Thorax
Gastroenterology
REPLY
KARL STORZ & Co. KG
Postfach 230
78503 Tuttlingen/Germany
Postagepaid
Please tear off postcard here!
Please tear off postcard here!
Request per Business Reply Cardor per FAX+49 (0)7461 708 404 or one of KARL STORZ distribution companies– checkmark – provide address on back of card – send –
✂
✂
✂
Catalogs, Catalog excerpts
I prefer: Print Version Digital Version (CD, DVD) (please check)
Address:
Hospital/Office
Contact
Street
Postal Code
Town/City
Tel.
Laparoscopy in Surgery, Gynecology, Urology
- Pediatric Laparoscopy
- Minilaparoscopy
Gynecology
- Fetoscopy
Urology
Proctology
Arthroscopy, Sports Medicine,Spine Surgery
- RECON – Bone and Joint Reconstruction
Microscopy
Pediatric Surgery
KARL STORZ OR1 NEO®
Telepresence
Hygiene
Neurosurgery
Oral and Maxillofacial Surgery
ENT – Esophagoscopy – Bronchoscopy
- Standard Instruments
- Laryngology
- Otology
- Rhinology and Rhinoplasty
- Sinoscopy, Rhinoscopy, Postrhinoscopy
Plastic Surgery
Anesthesiology and Emergency Medicine
- Video Intubation Systems
Endoscopes and Instruments
for Cardiovascular Surgery
Thorax
Gastroenterology
© All pictures, photos and product descriptions are the intellectual property of KARL STORZ GmbH & Co. KG.Utilisation and copies by third parties have to be authorized. All rights reserved.
3-15
Important Notes:
It is recommended to check the suitability of the product for the intended procedure prior to use.
Endoscopes and accessories contained in this catalog have been designed in part with the cooperation ofphysicians and are manufactured by the KARL STORZ group. If subcontractors are hired to manufactureindividual components, these are made according to proprietary KARL STORZ plans or drawings.Furthermore, these products are subject to strict quality and control guidelines of the KARL STORZ group.Both contractual and general legal provisions prohibit subcontractors from supplying componentsmanufactured by order of KARL STORZ to competitors.
Any assumptions that competitors’ endoscopes and accessories are acquired from the same suppliers as theKARL STORZ products are not correct. Moreover, endoscopes and instruments provided by competitors arenot manufactured according to the design specifications of KARL STORZ. This means it cannot be assumedthat these endoscopes and accessories – even if they look identical on the outside – are constructed in thesame manner and have been tested according to the same criteria.
Standardized Design and Labeling
KARL STORZ participates both in national and international bodies involved in the development of standardsfor endoscopes and endoscopic accessories. Standardized design and development therefore have long beenimplemented consistently by KARL STORZ. The user can rest assured that all products by the KARL STORZgroup have been designed and constructed not only in compliance with strict internal quality guidelines, butalso with international standards. All data relevant for safe use, such as viewing direction, sizes anddiameters, or notes regarding sterilization of telescopes, are applied to the instruments, have been formulatedaccording to international standards, and therefore provide reliable information.
As we constantly seek to improve and modify our products, we reserve the right to make changes in designthat vary from catalog descriptions.
Original or Counterfeit
KARL STORZ products are name brand articles renowned around the world and represent the state of the artin important areas of healthcare. A large number of “copy cat” products are currently being offered in manymarkets. These products are designed intentionally to resemble KARL STORZ products and use marketingstrategies that at least point out their compatibility with KARL STORZ products. These products are by nomeans genuine products, since genuine KARL STORZ products are sold worldwide exclusively under thename of KARL STORZ, which appears on the packaging and the product. In the absence of such labeling,the product is not from KARL STORZ.
KARL STORZ, therefore, is unable to ensure that such products are actually compatible with genuineKARL STORZ products or can be used with them without injury to the patient.
Information on events is available on the KARL STORZ websitewww.karlstorz.com