wireless stepper motor controller board - robomart.com

8
Stepper Motor Controller Board

Upload: robomart

Post on 12-Jan-2016

33 views

Category:

Documents


3 download

DESCRIPTION

Robomart have huge inventory of stepper motor controller board. You can buy stepper motor driver and other dc motor driver from Robomart.com

TRANSCRIPT

Page 1: Wireless Stepper Motor Controller Board - Robomart.com

Stepper Motor Controller Board

Page 2: Wireless Stepper Motor Controller Board - Robomart.com

Our Stepper Motor Controller Board

L298NStepper Motor Driver Board

BTS7960 43A H-BridgeStepper Motor Driver Board

ULN2803Stepper Motor Driver Board

4 AMPStepper Motor Driver Board

Page 3: Wireless Stepper Motor Controller Board - Robomart.com

L298N Stepper Motor Controller Board

This stepper motor driver module for arduino smart car robot. In this module have L298N chip. L298N chip can directly drive two 3-30 volt stepper dc motor and provide 5 volt interface.

Product Parameters

Dual H-Bridge L298N Drive Chip Terminal driver part of the supply area VMS: +5 V ~ +35 V Drive part of the peak current Io: 2A / Bridge The control signal input voltage range: 4.5-5.5V low 0V

high Maximum power consumption: 20W Storage temperature: -25 ~ +130 Driver board Weight: 33g

Product Code: RM0162

Page 4: Wireless Stepper Motor Controller Board - Robomart.com

BTS7960 Stepper Motor Controller Board

Double BTS7960 43A H-Bridge is high power stepper motor driver board arduino. This BTS 7960 is a fully integrated high current half bridge for stepper motor drive application.

Product Parameters

Double BTS7960 Half Bridge Board Operating voltage 24 V Continuous current 43A Max

Product Code: RM0445

Page 5: Wireless Stepper Motor Controller Board - Robomart.com

ULN2803 Stepper Motor Controller Board

ULN2803 is a stepper motor driver for arduino. It can control 2 4-phase stepper motor at same time. There are ten pins, 8 pins supply , 5 volt power input and leads to an external power supply.

Product Parameters

Working voltage DC +5V Drive capability 500 MA \ 50V Can drive four-phase wireless stepper motor

Product Code: RM1138

Page 6: Wireless Stepper Motor Controller Board - Robomart.com

4 AMP Stepper Motor Controller Board

This driver board support motor upto 4 amps/phase at 50 volts. This is a Single-chip bipolar sinusoidal micro-step stepping motor driver board.

Product Parameters

Drive 4.5 and 4 AMP sustained at 50 volts 4 decay modes from 20 to 80% Automatic idle drive power reduction Output monitor pins (Down / Alert)

Product Code: RM1140

Page 7: Wireless Stepper Motor Controller Board - Robomart.com

Contact Us

B5 C Block Sector 31, Above Indian Overseas BankNoida Uttar Pradesh 201301

India

Mob. +91-8744000555Tel. +91-120- 4317229

Email ID [email protected]. https://robomart.com

Page 8: Wireless Stepper Motor Controller Board - Robomart.com

Thank You