wireless pci adapter · 2016. 2. 16. · user guide smc2602w ez connect wireless pci adapter u 11...

User GuideSMC2602W

EZ Connect

Wireless PCI Adapteru 11 Mbps data rate: provides alternative for wired

LANs that can dramatically cut costsu Working range up to 100 ft (30 m) at 11 Mbps,

1500 ft (450 m) at 5.5 Mbps and loweru Point-to-point and point-to-multipoint accessu Seamless connectivity to wired Ethernet LANs

augments existing networks quickly and easilyu Direct Sequence Spread-Spectrum (DSSS)

technology provides robust, interference-resistantand secure wireless connection

u Supports a wide range of systems (Win95/98/NT/2000)

u Easy installationu Built-in antenna

EZ ConnectWireless PCI AdapterUser Guide

The easy way to make all your network connections

01-004045-000

6 HughesIrvine, CA 92618Phone: 1-800-SMC-4-YOU

CopyrightInformation furnished by SMC Networks, Inc.(SMC) is believed to be accurate and reliable.However, no responsibility is assumed by SMC forits use, nor for any infringements of patents orother rights of third parties which may result fromits use. No license is granted by implication orotherwise under any patent or patent rights ofSMC. SMC reserves the right to changespecifications at any time without notice.

Copyright © 2001 by

SMC Networks, Inc.

Irvine, California.All rights reserved. Printed in Taiwan

TrademarksSMC is a registered trademark; and EZ Connectand EZ Hub are trademarks of SMC Networks, Inc.Other product and company names are trademarksor registered trademarks of their respectiveholders.

Limited Lifetime WarrantyComplete warranty information for all SMCproducts is available on SMC�s Web site at www.smc.com.

TABLE OF CONTENTS

The EZ Connect Wireless PCI Card ....... 1SMC2602W ................................................. 1Package Checklist ....................................... 1

Hardware Description ............................... 2Application...........................................................2LED Indicator .....................................................4System Requirements ..........................................4Installation ...........................................................5

Driver Installation ......................................7Windows 95/98/2000 Installation ................... 7Driver Installation for WindowsNT 4.0 ....... .14

Network Configuration and Planning .. 17

Network Topologies ................................ 17 Ad Hoc Wireless LAN ......................................17 Infrastructure Wireless LAN ............................18 Setting the Communication Domain .............19

Configuration and Diagnostic Utility ... 20Utility Installation .............................................20Using the Wireless LAN Utility .......................20Link Information Screen ..................................21Configuration Screen .........................................22Encryption Screen ..............................................24

Troubleshooting ....................................... 26PCI Compatibility .............................................26Network Connection Problems.......................27

SMC Networks 802.11b Wireless ProductMaximum Distance Table ..... 28

Compliances ............................................. 29

FCC - Class B ..................................................... 29

CSA Statement (Canada) ..................................30CE Mark Declaration of Conformance ...........30

Specifications ........................................... 31

THE EZ CONNECT WIRELESS PCIADAPTER SMC2602W

SMC�s EZ Connect Wireless PCI Adapter is an11 Mbps wireless network card that seamlesslyintegrates with existing Ethernet networks to supportapplications such as mobile users or temporaryconferences. This solution offers fast, reliable wirelessconnectivity with considerable cost savings over wiredLANs (which include long-term maintenance overheadfor cabling). Just plug wireless cards into your desktopPCs and start networking.

Using this card in conjunction with SMC�s EZ ConnectWireless access point, you can create an instant networkthat integrates seamlessly with 10 Mbps EthernetLANs. Moreover, moving or expanding your networkis as easy as moving or installing additional accesspoints�no wires!

PACKAGE CHECKLIST

The EZ Connect Wireless PCI Adapter packageincludes:

� 1 EZ Connect Wireless PCI Adapter(SMC2602W)

� 1 driver diskette

� 1 utility diskette

� This User Guide

Please register this product and upgrade productwarranty at www.smc.com.

Please inform your dealer if there are any incorrect,missing or damaged parts. If possible, retain the carton,including the original packing materials. Use them againto repack the product in case there is a need to return itfor repair.

1

2

EZ CONNECT WIRELESS PCI ADAPTER

HARDWARE DESCRIPTION

SMC�s EZ Connect Wireless PCI Adapter supportsan 11 Mbps half-duplex connection to Ethernetnetworks. This adapter is fully compliant with2.4 GHz DSSS CSMA/CA wireless networking asdefined in IEEE 802.11b. Support is provided forWindows 95/98/NT/Me/2000.

Applications

The EZ Connect Wireless products offer a fast,reliable, cost-effective solution for wireless client accessto the network in applications such as:

� Remote access to corporate networkinformationE-mail, file transfer and terminal emulation

� Difficult-to-wire environmentsHistoric or old buildings, asbestos installations,and open areas where wiring is difficult to employ

� Frequently changing environmentsRetailers, manufacturers and banks who frequentlyrearrange the workplace and change location

Indicator LED

3


� Temporary LANs for special projects or peaktimeTrade shows, exhibitions and construction siteswhich need a temporary setup for a short timeperiod. Retailers, airline and shipping companieswho need additional workstations for a peakperiod. Auditors who require workgroups atcustomer sites

� Access to databases for mobile workersDoctors, nurses, retailers, white-collar workerswho need access to databases while being mobilein the hospital, retail store or office campus

� SOHO (Small Office and Home Office) usersSOHO users who need easy and quick installationof a small computer network

4


LED Indicators

The EZ Connect Wireless PCI Adapter includesone status LED indicator, as described in thefollowing figure and table.

edoM sutatS noitpircseD

coHdA gnihsalF siretpadAICPehttahtsetacidnI.edomcoHdAnignitarepo

erutcurtsarfnI gnihsalF siretpadAICPehttahtsetacidnI.stniopsseccaevitcagnisworb

nO naotnoitcennocdilavasetacidnI.tniopssecca

System Requirements

Before you install the EZ ConnectWireless PCIAdapter, check your system for the followingrequirements:

� An available PCI bus-master slot in your computer.

� Windows 95/98/NT/2000 (Have the Windowsinstallation CD-ROM ready for use duringinstallation).

� A minimum of 500 Kbytes of free disk space forinstalling the driver and utility program.

� Another IEEE 802.11b-compliant device installedin your network, such as the SMC2652W WirelessAccess Point, or the SMC 2602W Wireless PCIAdapter.

Status LED

5


INSTALLATION

Warnings:

� Network cards are sensitive to static electricity. Toprotect the card, always touch the metal chassis ofyour computer before handling the card.

� Backup your driver diskette and use the copy asthe working diskette to protect the original fromaccidental damage.

� Do not remove the PCI adapter from, or plug itinto, the computer while it is powered on.

1. Switch off the computer, unplug the power cord,and remove the computer�s cover.

2. Select an unused PCI bus-master slot and removeits protective bracket.

3. Carefully insert the card and press until all the edgeconnectors are firmly seated inside the slot. Then,screw the card�s bracket securely into the PC�schassis.

6


4. Install the appropriate network driver foryour operating system. Drivers can be found onthe driver diskette. See �Driver Installation� formore information.

5. Install the configuration program for yourwireless PCI adapter. The SETUP.EXE file canbe found on the utility diskette. See�Configuration and Diagnostic Utility� (page20) for more information.

7


DRIVER INSTALLATION

The diskette labeled �Driver Diskette,� that comeswith the package contains all the software driversavailable for the EZ Connect Wireless PCI Card.Select the driver you need for your system and referto this guide for the installation and configurationprocedure. Any new or updated drivers can bedownloaded from SMC�s Web site at http://www.smc.com.

WINDOWS 95/98/2000 INSTALLATION

1. Windows 95/98/2000 will automatically detectthe new hardware and prompt you to install thedriver Click �Next� to find the driver.

2. Insert the floppy disk labeled �Driver Diskette,�specify the location �A:\� and click �Next�

8


3. Click �Next� to copy files from the floppy disk.

4. For Windows 2000, select the protocols you wantto use and click �OK.�.

9


5. To communicate with SMC 11 Mbps Wirelessdevices set �Authentication Algorithm� to �SharedKey.� Products from some other vendors use thesetting �Open System.� Use the same setting asother devices in your network.

1 0


6. To set up an ad hoc wireless LAN (refer to page17), set �Channel� to the same radio channel asthat used by the other wireless clients in yourgroup. However, if you are connecting to anetwork via an access point, the adapter willautomatically set the channel to be the same as thatused by the access point.

7. Set �Network Type� to �AdHoc� or�Infrastructure� depending on the type of networkyou want to connect to (See page 17).

1 1


8. Enable the �PowerSaveMode� for reducingpower loading. (Default: Disabled)

9. Set the RTS threshold to the same as that usedby other devices in your network. (The defaultis 2432 which means �Disable�)

1 2


10. Set the �SSID� identifier to the same as thatused by the ad hoc work group or access pointyou want to connect to. (SMC2652W Accesspoint default: WLAN)

11. For more secure data transmission, set the �UseWep� to �128 - bit� or �64 - bit� to ensure wirelessnetwork security. The advance Wired EquivalentPrivacy (WEP) is implemented in this card toprevent unauthorized access. The 128 bit settinggives a higher level of security but the setting mustbe the same for all clients in your wireless network.(Default: Disabled)

1 3


12.If you want to add more protocols after installation,go to control panel and double click on �Network�

13. Select the �Configuration� tab and click �Add� toinstall the network protocols you want to use, suchas IPX/SPX, NetBEUI or TCP/IP.

If you install TCP/IP, be sure to set theappropriate Gateway, DNS Server, and Domain foryour network.

If you install an IPX/SPX-compatible protocol,then you also need to install the Client forNetWare Networks.

14. Click �File and Print Sharing�� to share files orprinters.

15. Click on the �Identification� tab on the Networkdialog box, and specify your computer name andnetwork workgroup.

16. Click �Close� in the Network dialogue box and thesystem will restart your computer.

1 4


INSTALLATION FOR WINDOWS NT 4.01. From the desktop, select �Control Panel,� double-

click �Network,� click �Adapters,� and then clickthe �Add� button on the Network dialog box.

2. Windows NT will present a list of all its supportedadapters. Click �Have Disk� to continue.

3. Windows NT will ask for the drive/pathcontaining the SMC2602W Windows NT drivers.Insert the SMC2602W Diskette into the floppydrive, then type �A:\� and click �OK.�

4. Windows NT will attempt to locate an INF file inthe specified path. If you have entered the pathname correctly, Windows NT will copy theappropriate drivers to the Windows NT system.Select �SMC2602W EZ Connect Wireless PCIAdapter� and click �OK.�

1 5


5. The Adapter Setup dialog box will appear.Configure the card as described below, and click�OK.�

Mode - Set to AdHoc or Infrastructure, dependingon the type of network you want to connect to(see page 17).

SS ID - Set the �SS ID� identifier to the same asthat used by the ad hoc workgroup or access pointyou want to connect to. (SMC2652W Access pointdefault: WLAN)

DS Channel - If you are setting up an ad hocwireless LAN (see page 17), set the channelnumber to the same radio channel as that used bythe other wireless clients in your group. However,if you are connecting to a network via an accesspoint, then use the same channel as that used bythe access point.

RTS Threshold - Set the RTS threshold to thesame as that used by the other devices in yournetwork. (Default: Disabled)

Power Saving - Enable the �PowerSaveMode� forreducing power loading. (Default: Disabled)

1 6


WEP - For more secure data transmission, setthe �Use Wep� to �128 - bit� or �64 - bit� toensure wireless network security. The advanceWired Equivalent Privacy (WEP) isimplemented in this card to preventunauthorized access. The 128 - bit setting gives ahigher level of security, but the setting must bethe same as other clients in your wirelessnetwork. (Default: Disabled)

Authentication Algorithm - Set this to thesame as other devices in your network. SMCdevices use �Shared Key.� Devices from someother vendors use �Open System.�

6. Select the Protocols tab and Click �Add�� toinstall the network protocols you want to use, suchas IPX/SPX, NetBEUI or TCP/IP.

If you install an IPX/SPX-compatible protocol,then you also need to install the Client forNetWare Networks.

7. Click on the �Identification� tab and specify yourcomputer name and network workgroup.

8. Click �Close� and the system will restart yourcomputer.

1 7


NETWORK CONFIGURATION AND

PLANNING

SMC�s EZ Connect Wireless Solution supports a stand-alone wireless network configuration, as well as anintegrated configuration with 10 Mbps Ethernet LANs.

The SMC2602W PCI adapter can be configured as:

� Ad hoc for departmental or SOHO LANs

� Infrastructure for enterprise LANs

Network Topologies

Ad hoc Wireless LAN

An ad hoc wireless LAN consists of a group ofcomputers, each equipped with a wireless adapter,connected via radio signals as an independent wirelessLAN. Computers in a specific ad hoc wireless LANmust therefore be configured to the same radiochannel.

An ad hoc wireless LAN can be used for a branchoffice or SOHO operation.

Infrastructure Wireless LAN

The SMC2602W can also provide access to a wiredLAN for wireless workstations. An integrated wiredand wireless LAN is called an Infrastructureconfiguration. A Basic Service Set (BSS) consists of agroup of wireless PC users, and an access point that isdirectly connected to the wired LAN. Each wireless PCin this BSS can talk to any computer in its wirelessgroup via a radio link, or access other computers ornetwork resources in the wired LAN infrastructure viathe access point.

The infrastructure configuration not only extends theaccessibility of wireless PCs to the wired LAN, but alsodoubles the effective wireless transmission range forwireless PCs by passing their signal through one ormore access points.

A wireless infrastructure can be used for access to acentral database, or for connection between mobileworkers, as shown in the following figure.

18


1 9


Setting the Communication Domain

Stationary Wireless PCs

The Basic Service Set (BSS) is the communicationdomain for each SMC2652W access point. For wirelessPCs that do not need to support roaming, set thedomain identifier (SSID) for the wireless card to theBSS ID of the access point you want to connect to.Check with your administrator for the BSS ID of theSMC2652W access point he wants you to connect to.

Roaming Wireless PCs

A wireless infrastructure can also support roaming formobile workers. More than one access point can beconfigured to create an Extended Service Set (ESS).By placing the access points so that a continuouscoverage area is created, wireless users within this ESScan roam freely. All SMC2602W PCI adapters andSMC2652W access points within a specific ESS mustbe configured with the same SS ID.

Before setting up an ESS for roaming, you need tochoose a clear radio channel and ideal location for theSMC2652W access points to maximize performance.(Refer to �Using the Wireless LAN Utility� on page 19for detailed information on installation and usage.)

2 0


CONFIGURATION AND DIAGNOSTIC

UTILITY

SMC�s EZ Connect Wireless 2602W Wireless adapterprovides free optional management software for quicknetwork configuration and easy diagnostics. Thediskette labeled �Utility,� that comes with the package,contains a user-friendly interface for configuring theEZ Connect Wireless 2602W PC Adapter.

Utility Installation

To install the utility software:

1. Insert the �Utility� setup diskette in your PC�sfloppy drive (A:).

2. Select �run...� from Windows �Start� menu bar.

3. Click on �Browse...� to locate the �setup� file ofthis program.

4. Then click on �OK� to run the setup program.

5. Follow the on-screen instructions to finishinstallation.

Using the Wireless LAN Utility

Once the installation is completed, the configurationutility can be accessed by selecting the �ConfigurationUtility� icon from the �PRISM 802.11 Wireless LAN�folder.

2 1


This configuration software includes the followingfunctions:

Link Information - Allows you to monitor networkstatus.

Configuration - Allows you to configure parameters forthe wireless adapter.

Encryption - Provides RC4 security control.

Link Information Screen

When you start the wireless LAN utility, the hardwareinformation window for the SMC2602W is shown onthe first folder of the utility windows as shown below.Click on the �Link Information� tab to monitor thenetwork status of the wireless adapter, including theBSS ID, current channel, transmission rate used,transmission/receiving throughput, link quality, andsignal strength condition.

2 2


Configuration Screen

The Configuration screen allows you to check andmodify the configuration of the adapter. The user-configurable parameters are shown as the followingfigure:

Mode - Set the station operation mode to�AdHoc� or �802.11 AdHoc� for networkconfigurations that do not have any accesspoints, or to �Infrastructure� forconfigurations with access points (�Infrastructure� is the default setting).

SSID - Input an SSID string that you want toconnect to (�ANY� is the default setting).

Tx Rate - Indicates the communication rates.Select appropriate transmission speed to matchyour wireless LAN settings. (Default: FullyAutomatic)

2 3


PS Mode - Enable the Power Saving Mode forreducing power loading. (Default: Disabled)

Channel - If you are setting up an ad hocwireless LAN (see page 17), set the channelnumber to the same radio channel as that usedby the other wireless clients in your group.However, if you are connecting to a networkvia an access point, then the channel isautomatically set to the channel of the accesspoint that the adapter connects to.

2 4


Encryption Screen

The WEP (Wired Equivalent Privacy) implementedin SMC�s EZ Connect Wireless PCI Card is basedon an RC4 encryption algorithm. The security keysprovided to ensure data confidentiality are four 10bit keys for the 64 bit Wep setting (first screenbelow) and one 26 - bit key for the 128 - bit Wepsetting (second screen below). This WEP securityprotects your wireless LAN against eavesdroppingand unauthorized access by hackers or unexpectedintruders. If the WEP is in use, the WEP key isrequired for connecting to an access point orlistening to messages that pass through the air.

Encryption (WEP) - For more secure datatransmission, set the �Use Wep� to �128 - bit�or �64 - bit� to ensure wireless networksecurity. The advance Wired Equivalent Privacy(WEP) is implemented in this card to preventunauthorized access. The 128 - bit setting givesa higher level of security, but the setting mustbe the same as other clients in your wirelessnetwork. (Default: Disabled)

To use the WEP function, take the following steps:

1. Select �128 bit� or �64 bit� for the �WEP�field.

2 5


2. Enter your passphrase and click on the�Apply� button to create and save security keysor otherwise key in WEP keys manually in�Manual Entry� field.

3. Select one encrypted key (from Key 1 to Key4) as your default key.

2 6


TROUBLESHOOTING

Check the following troubleshooting items beforecontacting Technical Support.

PCI Compatibility

Some PCI computers are not self-configuring andrequire you to perform some or all of the followingfunctions by motherboard jumper changes and/orBIOS Setup program configuration:

� Make sure your BIOS correctly supports the PCILocal Bus Specification v2.0 or later and upgradeyour computer BIOS to the latest version.

� Verify that the PCI slot is an enabled bus-masterslot and not a slave PCI slot. In some computersthe PCI slot must be configured to enable busmastering. Refer to your PC�s manual and checkthe PCI BIOS Setup program to be sure the PCIslot is an enabled bus-master slot.

� In some computers, you may be required todisable Plug �n Play (PnP) in the BIOS Setupprogram if resources are not properly assignedbetween installed cards.

� Some computers may require you to reserveinterrupts and memory addresses for installed ISAcards to prevent PCI adapters from using the samesettings. Refer to your PC�s manual and check thePCI BIOS Setup program configuration optionsfor ISA cards.

� Make sure the PCI slot is configured to supportINTA.

� Be sure that INTA for the slot is assigned to a freeinterrupt (IRQ) number.

� If it still does not work, remove the wirelessadapter. Delete CW10.sys from c:\windows\system. Then go to �Control Panel�and delete the adapter from your networkconfiguration menu. Restart your PC and reinstallthe card as described on page 5.

2 7


NETWORK CONNECTION PROBLEMS

If the LED on the PCI adapter does not light, or ifyou can�t access any network resources from thecomputer. Check the following:

� Make sure the correct software driver isinstalled for your operating system. Ifnecessary, try reinstalling the driver.

� Make sure the computer and other networkdevices are receiving power.

� The access point you want to attach to may bedefective. Try using another SMC2652W accesspoint.

� If you cannot access a Windows or NetWareservice on the network, check that you haveenabled and configured the service correctly. Ifyou cannot connect to a particular server, be surethat you have access rights and a valid ID andpassword.

� If you cannot access the Internet, be sure you haveconfigured your system for TCP/IP.

If your wireless station cannot communicate with acomputer in the Ethernet LAN when configured forInfrastructure mode, check the following:

� Make sure the SMC2652W access point whichthe station associated with is powered on.

� Make sure your wireless station is configuredwith the same operating radio channel as theSMC2652W.

� If you still can�t connect, change the SMC2652Waccess point and all the stations within the BSS toanother radio channel.

� Make sure the BSS ID is the same as theSMC2652W for a station with roaming disabled, orthe SS ID is the same as the SMC2652W for astation with roaming enabled.

2 8


SMC NETWORKS 802.11B WIRELESS PRODUCT

MAXIMUM DISTANCE TABLE

Important Notice:

Maximum distances posted below are actual testeddistance thresholds. However, there are manyvariables such as barrier composition andconstruction and local environmental interferencethat may impact your actual distances and causeyou to experience distance thresholds far lowerthan those we post below. If you have anyquestions or comments regarding the features orperformance of this product, or if you�d likeinformation regarding our full line wirelessproducts, you can visit us on the web of www.smc.com or you can call us toll-free at 800.SMC.4YOU.SMC Networks stands behind this and everyproduct we sell with a 30 day satisfaction guaranteeand with a limited-lifetime warranty.

2 9


COMPLIANCES

FCC Class B Certification

This device complies with Part 15 of the FCC Rules.Operation is subject to the following conditions:

1. This device may not cause harmful interference.

2. This device must accept any interference received,including interference that may cause undesiredoperation.

Warning! This equipment has been tested and foundto comply with the limits for a Class B digital device,pursuant to Part 15 of the FCC Rules. These limits aredesigned to provide reasonable protection againstharmful interference in a residential installation. Thisequipment generates, uses and can radiate radiofrequency energy and, if not installed and used inaccordance with the instructions, may cause harmfulinterference to radio communications. However, thereis no guarantee that interference will not occur in aparticular installation. If this equipment does causeharmful interference to radio or television reception,which can be determined by turning the equipment offand on, the user is encouraged to try to correct theinterference by one or more of the following measures:

� Reorient or relocate the receiving antenna.

� Increase the distance between the equipment andreceiver.

� Connect the equipment into an outlet on a circuitdifferent from the one which the receiver isconnected to.

� Consult the dealer or an experienced radio/TVtechnician for help.

3 0


CSA Statement (Canada)

This digital apparatus does not exceed the Class Blimits for radio noise emissions from digital apparatusset out in the Radio Interference Regulations ofIndustry Canada.

Le présent appareil numérique n�émet pas de bruitsradio-électriques dépassant les limites applicables auxappareils numériques de la classe B prescrites dens leRèglement sur le brouillage radioélectrique édicté parl�Industrie.

CE Mark Declaration of Conformance

This is to certify that this product complies with ISO/IEC Guide 22 and EN45014. It conforms to thefollowing specifications:

EMC: EN55022(1988)/CISPR-22(1985) Class BIEC 61000-4-2(2000) 4kVCD/8kVADIEC 61000-4-3(2000) 3V/mIEC 61000-4-4(2000) 1kV- (power

line)IEC 61000-4-6(2000) 3VrmsIEC 61000-4-11(2000) 3Vrms

This product complies with the requirements of theLow Voltage Directive 73/23/EEC and the EMCDirective 89/336/EEC, and carries the CE Markaccordingly.

3 1


SPECIFICATIONS

Functional CriteriaData Rate 1, 2, 5.5, 11 MbpsTransmission Mode Half duplexNetwork Connection IEEE 802.11b - wirelessOperating Range Up to 30 m (100 ft) at 11 Mbps

Up to 450 m (1500 ft) at 5.5 Mbps orlower

Interrupt INTARadio Signal

Signal Type Direct Sequence Spread-Spectrum (DSSS)Operating Frequency USA, Canada and Europe (ETSI):

2.400-2.4835 GHz, Japan: 2.400-2.497 GHz

Sensitivity 1, 2, 5.5 Mbps: -80 dBm,11 Mbps: -76 dBm (minimum)

Modulation CCK, BPSK, QPSKOutput Power +13 dBm (minimum)

Physical CharacteristicsPower Consumption 480 mA @ 5V transmit,

360 mA @ 5V receiveDimensions 178 x 120 x 20 mm (7 x 4.7 x 0.8 in)Weight 136 g (4.8 oz)Antenna Built-inLED Indicator ADHoc, Infrastructure (browsing AP

link)Host Interface PCI Specification 2.1Standards Conformance IEEE 802.11bEnvironmental

Temperature Operating: 0 to 50°C (32 to 122°F)Storage: 0 to 70°C (32 to 158°F_

Humidity 5 to 80% (non-condensing)Vibration/Shock/Drop IEC 68-2-34, IEC 68-2-27,

IEC 68-2-32Certification

CE Mark EN55022 Class B, EN 55024,IEC 61000-4-2/3/4/6/11

Emissions FCC Class B, ETS 300-328,RCR STD-33 A

Software DriversNDIS Drivers Windows 95

Windows 98Windows 2000Windows NT 4.0

Publication Number:

01-004045-000

6 HughesIrvine, CA 92618Phone: 1-800-SMC-4-YOU

FOR TECHNICAL SUPPORT, CALL:

From U.S.A. and Canada (24 Hours a day)

(800) SMC-4-YOU; (949) 707-2400; (949) 707-2460 (Fax)

From Europe (8:00 AM - 5:30 PM UK Greenwich Mean Time)

44 (0) 1189748740; 44 (0) 1189748741 (Fax)

INTERNET

E-mail addresses:

[email protected]

[email protected]

Driver updates:

http://www.smc.com/support.html

World Wide Web:

http://www.smc.com/

FTP Site:

ftp.smc.com

FOR LITERATURE OR ADVERTISING RESPONSE, CALL:

U.S.A. and Canada: (800) SMC-4-YOU; Fax (949) 707-2460

Spain: 34-93-477-4920; Fax 34-93-477-3774

UK: 44 (0) 1189 748700; Fax 44 (0) 1189 748701

Southern Europe: 33 (1) 41.18.68.68; Fax 33 (1) 41.18.68.69

Central/E. Europe: 49 (0) 89 92861-200; Fax 49 (0) 89 92861-230

Nordic: 46 (8) 564 33145; Fax 46 (8) 87 62 62

Middle East: 971-48818410; Fax 971-48817993

South Africa: 27 (0) 11-3936491; Fax 27 (0) 11-3936491

PRC: 86-10-6235-4958; Fax 86-10-6235-4962

Taiwan: 886-2-2747-4780; Fax 886-2-2747-9220

Asia Pacific: (65) 238 6556; Fax (65) 238 6466

Korea: 82-2-553-0860; Fax 82-2-553-7202

Japan: 81-45-224-2332; Fax 81-45-224-2331

Australia: 61-2-9416-0437; Fax 61-2-9416-0474

India: 91-22-8204437; Fax 91-22-8204443

wireless pci adapter · 2016. 2. 16. · user guide smc2602w ez connect wireless pci adapter u 11...

Documents