winpack se range 95-330 kw - untes.com.tr
TRANSCRIPT
� www.untes.com | � [email protected]
Water Chiller Heat Pump Systems � Air Cooled Chillers & Heat Pumps - Scroll
WinPACK SE Range 95-330 kW
ESEER with Adaptive Function Plus up to 4.13
3 choking steps
Rich range of accessories
High performance range with extended working limits.
�
�
�
�
Construction features• Compressor: Hermetic, rotary scroll compressor, complete with thermal
protection and crankcase heater.
• Water side heat exchanger: Stainless steel plate exchanger, complete with
closed cell polyurethane foam rubber insulation and water flow differential
pressure switch.
• Air side heat exchanger: Microchannel or finned coil exchanger, with copper
pipes and aluminium fins according to models/sizes.
• Fan: Electric axial fans with external rotor, equipped with internal thermal
protection and protection grilles.
• Control: Microprocessor electronic control with Adaptive Function Plus logic.
• Structure: Load-bearing structure in galvanised and painted sheet steel with
polyester powder coating.
• The unit is also complete with:
• Compressor and fan thermal overload switches,
• Display of refrigerant circuit high/low pressure,
• Clock board.
Versions• B-Standard version (TCAEBY-THAEBY).
• S- Silenced version complete with soundproofed compressor compartment,
lower speed fans (TCAESY-THAESY).
Models• TCAEBY: Standard unit designed for cooling only.
• TCAESY: Silenced unit designed for cooling only.
• THAETY: Heat pump unit.
• THAESY: Silenced heat pump unit.
Factory fitted accessories• Shell and tube evaporator.• PUMP with single or double pump, including an automatic pump in standby. The pumps are available in the low or high pressure versions.• TANK&PUMP with built-in storage tank from 300 to 700 litres (depending on models) and single or double electric pump, complete with expansion tank, air bleed valves, safety valve, and water side pressure gauge.• Desuperheater.• Heat recovery unit 100%.• Electronic expansion valve.• -10°C condensation control (standard in S versions).• -15°C condensation control with fans with EC motor.• Condensation control with over-pressurised fans.• Power factor correction capacitors (cos > 0.91).• Forced limit of power consumption.• Forced noise suppression.• Energy parameters measuring device.• Optimised energy efficiency.• Soft starter.• Soundproofed compressors box • Compressor sound blankets.• Cooling circuit intake and flow taps• Refrigerant circuit high and low pressure gauges.• Metal filters or coil protection grilles.• Copper/copper or copper/pre-painted aluminium coils.• Digital input for double set-point.• 4-20 mA analogue input for shifting set-point.• Evaporator antifreeze heater, electric panel, buffer tank, electric pumps and heat exchangers for heat recovery if present.• Buffer tank integrative heaters• Low temperature water production.• Interfaces for serial communication with other devices.• Anti-vibration mounts.
Accessories supplied loose• Remote keyboard with display.• Thermostat with display• Untes supervisors for unit monitoring and remote management.• Untes sequencer for integrated management of several water chillers.