window remote control and automation systems … · c s window remote control and automation...

8
U C S WINDOW REMOTE CONTROL AND AUTOMATION SYSTEMS

Upload: nguyendan

Post on 07-May-2018

224 views

Category:

Documents


0 download

TRANSCRIPT

UCS WINDOW REMOTE CONTROL

AND AUTOMATION SYSTEMS

Prinect Color Editor
Page is color controlled with Prinect Color Editor 4.0.092 Copyright 2010 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): CoatedFOGRA39.icc RGB Image: Profile: sRGB_hdm.icc Rendering Intent: From Document Black Point Compensation: no RGB Graphic: Profile: sRGB_hdm.icc Rendering Intent: From Document Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Absolute Colorimetric Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Absolute Colorimetric Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Absolute Colorimetric Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: no Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: Colors to knockout: yes Gray to knockout: yes Pure black to overprint: yes Limit: 98% Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: as is Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
Prinect Trap Editor
Page is trapped with Prinect Trap Editor 6.0.092 Copyright 2010 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document traps, with the free Trap Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Settings: Width: 0.053 mm = 0.150 pt Printorder: Black / Cyan / Magenta / Yellow / Step Limit: 25.0% Common Density Limit: 0.50 Centerline Trap Limit: 100% Trap Color Scaling: 100.0% Image to Object Trapping: yes Image to Image Trapping: no Black Width Scaling: 100.0% Black Color Limit: 95.0% Overprint Black Text: 20.0 pt Overprint Black Strokes: no Overprint Black Graphics: no

Comfort, Energy Saving and SafetyElec

tric

Sys

tem

sM

anua

l Sys

tem

sPn

eum

atic

Sys

tem

s

GREEN ARCHITECTUREGREEN ARCHITECTURE

NATURAL VENTILATION for healthy indoorenvironment and energy saving

lIIlII Reducing Air ConditioninglIIlII Night coolinglIIlII Integrating in BMS lIIlII Manual Controls (no electrical/wiring costs)

SMOKE VENTILATION for the protection of thebuilding in case of fire

lIIlII Smoke is the first cause of death during a firein a building

lIIlII Emergency exits, escape routes must be freeof smoke

lIIlII Firemen can enter, save lives and extinguishfire

EMERGENCY SYSTEMSEMERGENCY SYSTEMS

Prinect Color Editor
Page is color controlled with Prinect Color Editor 4.0.092 Copyright 2010 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): CoatedFOGRA39.icc RGB Image: Profile: sRGB_hdm.icc Rendering Intent: From Document Black Point Compensation: no RGB Graphic: Profile: sRGB_hdm.icc Rendering Intent: From Document Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Absolute Colorimetric Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Absolute Colorimetric Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Absolute Colorimetric Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: no Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: Colors to knockout: yes Gray to knockout: yes Pure black to overprint: yes Limit: 98% Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: as is Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
Prinect Trap Editor
Page is trapped with Prinect Trap Editor 6.0.092 Copyright 2010 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document traps, with the free Trap Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Settings: Width: 0.053 mm = 0.150 pt Printorder: Black / Cyan / Magenta / Yellow / Step Limit: 25.0% Common Density Limit: 0.50 Centerline Trap Limit: 100% Trap Color Scaling: 100.0% Image to Object Trapping: yes Image to Image Trapping: no Black Width Scaling: 100.0% Black Color Limit: 95.0% Overprint Black Text: 20.0 pt Overprint Black Strokes: no Overprint Black Graphics: no

Acoustic alarm device

HVAC HEATING LIGHTS

Smoke Ventilation Contro Panel

Optical smoke detector

Ventilation push button

Emergency push button

Power Supply BUILDING

MANAGEMENT SYSTEM

UCS Modbus

BMSlineProgrammable chain actuatorsIntegrating window automation into Building Management Systems

BMSline is a new line of chain actuators equipped with an electronic board that allows the installer to set features according tothe requirements of the installation.Moreover the actuators can be easily integrated in a Building Management System through a Gateway, in order to set thefeatures according to the requirements of the user at any time via BUS communication line and to get a real time feedback ofthe status of the window.The BMSline electronic board is installed in the QUASAR and VEGA series (Twin Quasar and Twin Vega included) with 24 Vdcvoltage supply.Parameters setting is possible when ordering, before or during installation, after at any time via BUS line, eventually fromanywhere in the world via web.

Connect the actuators to a BuildingManagement SystemThe UCS Gateway is able to translate the BMSlinecommunication BUS protocol (Modbus RTU) toother standard BUS languages (KNX, BACnet, …)for the integration of the window automation withother systems like heating, HVAC, sun control,etc. controlled by the Building ManagementSystem.

GREEN ARCHITECTUREBMSline allows to manage the automation of thewindows, and to get a feedback on their status, inorder to optimize the energy saving and ensure anhealthy environment of the building, granting atthe same time security and smoke ventilation incase of emergency.

Programmable parameterslIIlII StrokelIIlII SpeedlIIlII ForcelIIlII Real close position of the windowlIIlII Percentage of openingScenarioslIIlII Reduction of entrapment risklIIlII Speed synchronization for multiple

actuators on the same windowlIIlII “Soft” closing of the windowlIIlII Quiet operation in case of ventilation and

full speed and force for Smoke and HeatExtraction

lIIlII Local control of the window even withcentralized management

BEFORE installation

DURING installationTo set the real closing position of thewindow

USB setup kit supplied byUCS

Prinect Color Editor
Page is color controlled with Prinect Color Editor 4.0.092 Copyright 2010 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): CoatedFOGRA39.icc RGB Image: Profile: sRGB_hdm.icc Rendering Intent: From Document Black Point Compensation: no RGB Graphic: Profile: sRGB_hdm.icc Rendering Intent: From Document Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Absolute Colorimetric Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Absolute Colorimetric Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Absolute Colorimetric Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: no Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: Colors to knockout: yes Gray to knockout: yes Pure black to overprint: yes Limit: 98% Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: as is Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
Prinect Trap Editor
Page is trapped with Prinect Trap Editor 6.0.092 Copyright 2010 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document traps, with the free Trap Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Settings: Width: 0.053 mm = 0.150 pt Printorder: Black / Cyan / Magenta / Yellow / Step Limit: 25.0% Common Density Limit: 0.50 Centerline Trap Limit: 100% Trap Color Scaling: 100.0% Image to Object Trapping: yes Image to Image Trapping: no Black Width Scaling: 100.0% Black Color Limit: 95.0% Overprint Black Text: 20.0 pt Overprint Black Strokes: no Overprint Black Graphics: no

CONTROL PANELSEFC PANELS for Smoke, Heat Extraction and Ventilation

CRM control panel and meteorological detection system

E-LOCK electric actuator to be installedinto the frame of the window together

with the electrical chain actuatorsseries QUASAR and VEGA.

PLUSULTRA mechanical device (no motor) to be installed withthe electric chain actuators series QUASAR and VEGA. On request it is available a version for manual controls.

EFC Control Panel 10-20A for Smoke, Heat Extraction andmeteorological detection; it canbe connected to expansionmodules.

EFC Control Panel 4Afor Smoke and HeatExtraction

Ventilationpush button

Emergencypush button

Acousticalarm device

Optical smokedetector

Rain sensor Thermostat Winddetector

ADDITIONAL LOCKING DEVICESfor automated windows with multiple locking points

EPS Entrapment Protection System for automated windows

Smoke vent control panels can be linked to Building Management Systems (BMS)

KP pushbutton

Thermostat Winddetector

Rain sensor Ventilationpush button

Powersupply

CRM Panel EFC Panel 10-20A

BMS or firealarm

Ventilationpush button

Infra-red sensor

RC Remotecontrol

19-38 mm600N24 Vdc

Prinect Color Editor
Page is color controlled with Prinect Color Editor 4.0.092 Copyright 2010 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): CoatedFOGRA39.icc RGB Image: Profile: sRGB_hdm.icc Rendering Intent: From Document Black Point Compensation: no RGB Graphic: Profile: sRGB_hdm.icc Rendering Intent: From Document Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Absolute Colorimetric Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Absolute Colorimetric Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Absolute Colorimetric Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: no Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: Colors to knockout: yes Gray to knockout: yes Pure black to overprint: yes Limit: 98% Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: as is Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
Prinect Trap Editor
Page is trapped with Prinect Trap Editor 6.0.092 Copyright 2010 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document traps, with the free Trap Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Settings: Width: 0.053 mm = 0.150 pt Printorder: Black / Cyan / Magenta / Yellow / Step Limit: 25.0% Common Density Limit: 0.50 Centerline Trap Limit: 100% Trap Color Scaling: 100.0% Image to Object Trapping: yes Image to Image Trapping: no Black Width Scaling: 100.0% Black Color Limit: 95.0% Overprint Black Text: 20.0 pt Overprint Black Strokes: no Overprint Black Graphics: no

VEGA the smallest dimensions Casing in painted die-cast aluminium (grey, white and black). Double link chain in stainless steel. Manual closing position regulation is notrequired. Suitable to be built-in into the frame ofcurtain walls.

VEGA RF100-240 Vac version with radio remotecontrol

VEGA RF-RAIN 100-240 Vac version with radio remotecontrol and direct connection to rainsensor.

SYNCHRO VEGA Synchronized speed suitable to install upto 4 motors on the same window.

VEGA BMS see “BMSline” section fordetails

Available on request IP42 version

ELECTRIC CHAIN ACTUATORSFor ventilation and smoke/heat extraction

QUASAR high performance in a minimum sizeCasing in painted die-cast aluminium (grey, white and black). Double link chain in stainless steel. Manual closingposition regulation is not required.Suitable to be built-in into the frame ofcurtain walls.

QUASAR L Casing in anodized (silver) or painted(white or black) aluminium.Strokes available: 600mm - 750mm -1000mm

SYNCHRO QUASAR SYNCHRO QUASAR L Synchronized speed suitable to install upto 4 motors on the same window.

QUASAR BMS see “BMSline” section fordetails

Available on request IP42 version

STILE the most versatile Nylon casing (grey, white and black).Double link chain, two selectable strokes. Special brackets for quick installation.Double electric insulation actuator.

STILE RAdjustable stroke from 0 to 300 mm

SINTESI easy to be installedCasing in anodized (silver or dark bronze)or painted (white) aluminium. Single link chain. Two selectable strokes. Force in push action 180N (90N with 380 mm stroke)Force in pull action 300N (200N for the 24V version)

SUPER MASTER the most powerful withthe longest stroke Casing in anodized (silver or dark bronze)or painted (white) aluminium.Big size double link chain. Force 400N (300N for 800 mm stroke)

TWIN QUASAR and TWIN VEGATwo push points for wide and heavywindows.Casing in anodized (silver) or painted(white and black) aluminium. Two double link chains in stainless steelwith synchronized speed. Manual closing position regulation is notrequired. For a better aesthetic result, it is possibleon request to order actuators with thesame width of the window.

Some actuators, if specially required, are available with UL or UR approval and GOST

300 mm300N

100-240 Vac, 24 Vdc

500 mm300N100-240 Vac, 24 Vdc

230 - 400 mm300N230 Vac

250 - 380 mm230 Vac, 115 Vac, 24 Vdc

450-600-800 mm 400N

230 Vac, 115 Vac, 24 Vdc

TwinQuasar 500 mm,TwinVega 300 mm

600N 100-240 Vac, 24 Vdc

Prinect Color Editor
Page is color controlled with Prinect Color Editor 4.0.092 Copyright 2010 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): CoatedFOGRA39.icc RGB Image: Profile: sRGB_hdm.icc Rendering Intent: From Document Black Point Compensation: no RGB Graphic: Profile: sRGB_hdm.icc Rendering Intent: From Document Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Absolute Colorimetric Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Absolute Colorimetric Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Absolute Colorimetric Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: no Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: Colors to knockout: yes Gray to knockout: yes Pure black to overprint: yes Limit: 98% Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: as is Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
Prinect Trap Editor
Page is trapped with Prinect Trap Editor 6.0.092 Copyright 2010 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document traps, with the free Trap Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Settings: Width: 0.053 mm = 0.150 pt Printorder: Black / Cyan / Magenta / Yellow / Step Limit: 25.0% Common Density Limit: 0.50 Centerline Trap Limit: 100% Trap Color Scaling: 100.0% Image to Object Trapping: yes Image to Image Trapping: no Black Width Scaling: 100.0% Black Color Limit: 95.0% Overprint Black Text: 20.0 pt Overprint Black Strokes: no Overprint Black Graphics: no

ELECTRIC SPINDLE ACTUATORSFor heavy windows, domes, sun blades and horizontal louvres

FORCE the most powerful spindleactuatorCasing in anodized (silver) aluminium.Protection Class IP65.Stainless steel spindle.Supplied with fixing bracket andconnector

ULYSSES the spindle actuator with smalldimensionsSuitable to be built-in into the profile ofthe window for the automation of sunblades and horizontal louvres. Casing in anodized (silver) aluminium.High protection to atmospheric agents(IP65)

ELECTRIC RACK ACTUATORS

RACK actuatorCasing in anodized (silver) aluminium.Protection Class IP55. Available an end bracket or a slidingbracket for the installation on the wholelength of the actuator. To guarantee more push points on thesame vent, the Rack can be used togetherwith either auxiliary Rack actuators(motorized) or Rack assembly (notmotorized).

For further information on the Ultraflex Control Systems products, please refer to our catalogue, web site or contact our Technical Department.Ultraflex Control Systems S.r.l. reserves the right to modify product at any time without notice.

MAX the spindle actuator Casing in anodized (silver, dark bronze)

aluminium. Protection Class IP65.Available with end bracket or sliding

bracket for installation on the whole lengthof the actuator.

A special version (Max WP) for outdoorinstallation is available on request.

300-500 mm450N (300mm) 350N (500mm) 230 Vac

500-750-1000 mm1000N 24 Vdc

180-300 mm650N 24 Vdc

Kit to reduce thestroke

Sliding bracket

180-350-550-750-1000 mmForce in push 650N (230 Vac),750N (24 Vdc)

Installation with three push points: 1 Rack Actuator

1 Rack Assembly1 Auxiliary Rack

3 End brackets2 connecting rods

Prinect Color Editor
Page is color controlled with Prinect Color Editor 4.0.092 Copyright 2010 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): CoatedFOGRA39.icc RGB Image: Profile: sRGB_hdm.icc Rendering Intent: From Document Black Point Compensation: no RGB Graphic: Profile: sRGB_hdm.icc Rendering Intent: From Document Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Absolute Colorimetric Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Absolute Colorimetric Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Absolute Colorimetric Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: no Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: Colors to knockout: yes Gray to knockout: yes Pure black to overprint: yes Limit: 98% Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: as is Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
Prinect Trap Editor
Page is trapped with Prinect Trap Editor 6.0.092 Copyright 2010 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document traps, with the free Trap Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Settings: Width: 0.053 mm = 0.150 pt Printorder: Black / Cyan / Magenta / Yellow / Step Limit: 25.0% Common Density Limit: 0.50 Centerline Trap Limit: 100% Trap Color Scaling: 100.0% Image to Object Trapping: yes Image to Image Trapping: no Black Width Scaling: 100.0% Black Color Limit: 95.0% Overprint Black Text: 20.0 pt Overprint Black Strokes: no Overprint Black Graphics: no

MANUAL SYSTEMSReliable and economical remote controls for windows

PNEUMATIC SYSTEMSfor Smoke and Heat Extraction in case of emergency

A series of pneumatic cylinders, valves, CO2 cartridges and other accessories are available to set up smoke and heat extraction systems in case of emergency,according to the requirements of the European standards EN 12101-2. These pneumatic cylinders can also be used for ventilation where compressed airsystems are available.

PNEUMATIC CYLINDERSDouble action cylinders: they can open andclose. Provided with a mechanical locking

device in the end stroke positions(cylinders with no locking device are also

available on request). Front or rear (onrequest) feeding. For two cylinders on the

same vent installation, use the version withno locking device.

CO2 cartridges standard size: 20, 30, 50, 75, 100 g

Available fusible links: 68°, 93° and 141°C

180 -1000 mmØ 35 mm

VALVES and PYROTECHNIC DEVICEIn response to a thermal or electric signal (when thepyrotechnic device is installed), the valve pierces the cartridgeand CO2 flows into the cylinder making the window open. Thepyrotechnic device is activated by an electronic control panelconnected to smoke or temperature detectors.

CHAIN OPENERSuitable for bottom, top or centre hingedwindows. Casing in anodized (silver, dark bronze) orpainted (white) aluminium.

LOCKING OPENERThe best solution for an economical andeasy installation on a bottom hingedwindow. Frame is painted zinc alloy(white, black and grey).

Steel internal mechanism and cover in plastic or paintedaluminium depending on the model (white, black and grey). Handle in painted zinc alloy

CATChain opener: on windowsill Cat isoperated by handle (it allows windowoperation without removing any insectscreen), on skylight Cat is equipped witheyelet to be operated by a pole.Casing in painted die-cast aluminium(white, black and grey).

250-380 mm

250 mm

OPENING MECHANISMS

260 mm

Simple operator Geared operator Mini operator Flat operator

CONTROL OPERATORS

Prinect Color Editor
Page is color controlled with Prinect Color Editor 4.0.092 Copyright 2010 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): CoatedFOGRA39.icc RGB Image: Profile: sRGB_hdm.icc Rendering Intent: From Document Black Point Compensation: no RGB Graphic: Profile: sRGB_hdm.icc Rendering Intent: From Document Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Absolute Colorimetric Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Absolute Colorimetric Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Absolute Colorimetric Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: no Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: Colors to knockout: yes Gray to knockout: yes Pure black to overprint: yes Limit: 98% Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: as is Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
Prinect Trap Editor
Page is trapped with Prinect Trap Editor 6.0.092 Copyright 2010 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document traps, with the free Trap Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Settings: Width: 0.053 mm = 0.150 pt Printorder: Black / Cyan / Magenta / Yellow / Step Limit: 25.0% Common Density Limit: 0.50 Centerline Trap Limit: 100% Trap Color Scaling: 100.0% Image to Object Trapping: yes Image to Image Trapping: no Black Width Scaling: 100.0% Black Color Limit: 95.0% Overprint Black Text: 20.0 pt Overprint Black Strokes: no Overprint Black Graphics: no

Agricultural Bank of China Expo Pavilion 2000 Kimmel Center Organisation Mondialede la Propriété Intellectuelle

Ultraflex Group

Ultraflex Control Systems Srl Via XXV Aprile 45 - 16012 Busalla (GE) - ITALYPh. +39 010 9768232 - Fax +39 010 [email protected]/ucswww.ultraflexcontrolsystems.com

®

Steering and control systems for pleasure boats

UFLEX USA Inc.

Worldwide distributors of marine accessoriesSystems and accessories for alternative energy applications

UFLEX S.r.l.

Mechanical remote controls in the industrial, automotive and agricultural fields

INDUSTRIA DI LEIVI S.r.l.

other companies

ULTRAFLEX S.p.A.PR

INTE

D 20

14

Prinect Color Editor
Page is color controlled with Prinect Color Editor 4.0.092 Copyright 2010 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): CoatedFOGRA39.icc RGB Image: Profile: sRGB_hdm.icc Rendering Intent: From Document Black Point Compensation: no RGB Graphic: Profile: sRGB_hdm.icc Rendering Intent: From Document Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Absolute Colorimetric Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Absolute Colorimetric Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Absolute Colorimetric Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: no Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: Colors to knockout: yes Gray to knockout: yes Pure black to overprint: yes Limit: 98% Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: as is Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
Prinect Trap Editor
Page is trapped with Prinect Trap Editor 6.0.092 Copyright 2010 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document traps, with the free Trap Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Settings: Width: 0.053 mm = 0.150 pt Printorder: Black / Cyan / Magenta / Yellow / Step Limit: 25.0% Common Density Limit: 0.50 Centerline Trap Limit: 100% Trap Color Scaling: 100.0% Image to Object Trapping: yes Image to Image Trapping: no Black Width Scaling: 100.0% Black Color Limit: 95.0% Overprint Black Text: 20.0 pt Overprint Black Strokes: no Overprint Black Graphics: no