wilson urethane products
TRANSCRIPT
MARK FREE BENDING SOLUTIONS
Wilson Tool offers several solutions that help press brake operators reduce or eliminate sheet marking during bending operations. Because these urethane products successfully reduce or completely eliminate the marking of sheets during the critical bending operations, operators no longer need to take the time to clean up unwanted marks. Products available from Wilson Tool include:
Urethane DiesThese dies greatly reduce and, in some cases, completely eliminate sheet marking on the press brake. Available in Wilson Tool’s American and European style dies, these dies are available in the most common profiles.
Urethane Holders and PadsWilson Tool’s urethane holders are manufactured from 6061-T6 aluminum and hold a pad of urethane for mark free and radius bending. Two pad hardness options are available: Blue/90A is most commonly used and Red/80A, which helps reduce tonnage in the application by approximately 20%.
Urethane RollsAvailable in two styles, these rolls provide a protective layer across the top of your standard dies to virtually eliminate sheet marking. Our standard roll of urethane is offered in two thicknesses - .015” and .030”, to fit your application. Our newest high density urethane offering is .022” thick, lasting significantly longer than standard urethane and offered exclusively from Wilson Tool.
For more information on Wilson Tool’s line of urethane dies, holders, pads and rolls, contact your Sales Engineer, the Press Brake salesdesk at 800-445-4518 or email [email protected].
Strength. Performance. Innovation.
Wilson Urethane Products
42001UE
42002UE
42004UE
42005UE
42006UE
42021UE
90o
90o
88o
88o
88o
30o
46mm [1.81”]
46mm [1.81”]
46mm [1.81”]
46mm [1.81”]
46mm [1.81”]
50mm [1.96”]
50mm [1.96”]
50mm [1.96”]
60mm [2.36”]
60mm [2.36”]
60mm [2.36”]
60mm [2.36”]
S 415mm(16.3”) / L 835mm(32.8”)
S 415mm(16.3”) / L 835mm(32.8”)
S 415mm(16.3”) / L 835mm(32.8”)
S 415mm(16.3”) / L 835mm(32.8”)
S 415mm(16.3”) / L 835mm(32.8”)
S 415mm(16.3”) / L 835mm(32.8”)
Catalog # Angle V1 V2 H W Lengths
Catalog # Angle V H W Lengths
50031u
50032u
50033u
50034u
50035u
50036u
50037u
50018u
50020u
50021u
50022u
50023u
90o
90o
90o
90o
90o
90o
90o
85o
30o
30o
30o
30o
.25”
.37”
.50”
.62”
.75”
.87”
1.00”
2.00”
.25”
.37”
.50”
.62”
1.75”
1.75”
1.75”
1.75”
1.75”
1.87”
1.87”
2.25”
1.75”
1.75”
1.75”
1.87”
1.25”
1.25”
1.25”
1.75”
1.75”
1.75”
1.75”
3.00”
1.25”
1.25”
1.25”
1.75”
24” / 48” / 96”
24” / 48” / 96”
24” / 48” / 96”
24” / 48” / 96”
24” / 48” / 96”
24” / 48” / 96”
24” / 48” / 96”
24” / 48” / 96”
24” / 48” / 96”
24” / 48” / 96”
24” / 48” / 96”
24” / 48” / 96”
European Style Quick Change 2v Dies
American Style Dies
H
V1
W
V2
90o/88o
512” 512”
90o
.62”
.50”
90o /85o
.62”
.50”
H
W
30o
512” 512”
V1 V2When selecting a V-opening, a minimum of 10x material thickness should be chosen when working with mild steel with a tensile strength of 60,000 PSI.
All dies have standard 15.05mm [.61”] wide x 6.5mm [.26”] deep European die slots.
Wilson Urethane Dies
6mm [0.24”]
8mm [0.32”]
14mm [0.55”]
12mm [0.47”]
16mm [0.63”]
8mm [0.32”]
10mm [0.39”]
12mm [0.47”]
18mm [0.71”]
20mm [0.79”]
25mm [0.98”]
12mm [0.47”]
CATALOGNUMBER
425014251142521
Urethane Holder - L & SUrethane Pad - 80A/RedUrethane Pad - 90A/Blue
DESCRIPTION
CATALOGNUMBER
425034251342523
Urethane Holder - L & SUrethane Pad - 80A/RedUrethane Pad - 90A/Blue
DESCRIPTION
CATALOGNUMBER
425044251442524
Urethane Holder - L & SUrethane Pad - 80A/RedUrethane Pad - 90A/Blue
DESCRIPTION
CATALOGNUMBER
425024251242522
Urethane Holder - L & SUrethane Pad - 80A/RedUrethane Pad - 90A/Blue
DESCRIPTION
Note: All urethane die holders are machined from 6061-T6 aluminum. Urethane holders may require die holder #43040. Check height against machine stroke prior to ordering.
1.693[ 43 ]
2.362[ 60 ]
.984[ 25 ]
1.181[ 30 ]
3.583
[ 60 ]
[ 91 ]
2.362
[ 100 ]3.937
1.969[ 50 ]
1.969[ 50 ]
5.906[ 150 ]
2.362[ 60 ]
4.252[ 108 ]
1.772[ 45 ]
4.331[ 110 ]
Wilson Urethane Holders and Pads
3.268[ 83 ]
2.362[ 60 ]
4.724[ 120 ]
1.181[ 30 ]
3.150[ 80 ]
Urethane Rolls For Mark Free Bending
42530
42531
42532
.015 [0.4] x 6” [152]
.030 [0.8] x 6” [152]
.022 [0.6] x 6” [152]
White
White
Blue
Catalog # Dimensions Color
For more information on Wilson Tool’s line of urethane dies or urethane rolls, contact your Sales Engineer, the Press Brake Sales Desk at 800-445-4518 or email [email protected].
Standard
Standard
High Density
Wilson Urethane Rolls
Consider our V-Series™ Dies to Reduce Sheet Marking
Wilson Tool’s V-Series for press brake dies incorporates rotating inserts to decrease friction and to enable better performance on certain tough-to-bend applications. Manufactured by Rolla-V, the Wilson V-Series is available for virtually all major styles of press brake tooling.
Hard-to-bend Application CapabilityWilson V-Series dies make it much easier to produce small flanges, small bend radii, and bends closer to holes. The Wilson V-Series also enables you to bend a wide range of materials using the same die, reducing set-up time and reducing the amount of tooling required.
Reduced FrictionWilson V-Series dies include built-in blades that rotate so there is minimal lateral movement between the sheet and the die. This reduction in movement decreases the friction between the die and the sheet which helps to minimize sheet marking.
For more information on Wilson Tool’s V-Series dies, contact your Sales Engineer, the Press Brake Sales Desk at 800-445-4518 or email [email protected].
B314F