wilden advanced fit aodd pump launch_2014
TRANSCRIPT
Wilden®Advanced
™ FITSeriesBoltedAODD
Pumps
Wilden® Orig
inal™ Series A
ODD
Clamped Pumps Intro
duced
Wilden® Advanced™ Serie
s AODD
Bolted Pumps In
troduced
Wilden® Advanced™ Serie
s “Drop-In
”
AODD Pumps Intro
duced
Wilden® Advanced FIT AODD
Pumps Intro
duced
1955 1990s 2010 2014
Timeline
It’s Not Just A Name Change
It’s An Installation & Maintenance Improvement!
Pain Solution Benefits
Fasteners located in difficult, hard-to-reach locations that require hand tools to be used
Fasteners located in easily accessible locations that allow for a single socket and power tools to be used
• Faster Assembly / Disassembly
• Shorter Downtime
Too many fasteners on wet end components (example: 240 on PS800)
Fewer fasteners(example: 64 on PS830)73% Fewer Fasteners!
• Faster Assembly / Disassembly
• Shorter Downtime
Difficult to remove and re-install pumps without causing undue pipe strain on the pumps
Water chamber connection points at both the intake/discharge manifolds have flexibility built in
• Easier installation into existing poorly piped systems
• Superior containment and performance
HIGHER ROI
Model #20: Threaded Model #30: Flanged
It’s Not Just A Name Change
It’s A Performance Improvement!
Original Model
Advanced FIT
Model
Improved Flow Rates
PS4 PS420 35%PX4 PX420 45%PS8 PS820 *
PX8 PX820 *
PS15 PS1520 14%PX15 PX1520 12%
Advanced Model
Advanced FIT
Model
Improved Flow Rates
PS400 PS430 14%PX400 PX430 37%PS800 PS830 *
PX800 PX830 *
PS1500 PS1530 13%PX1500 PX1530 12%
HIGHER ROI
It’s Not Just A Name Change
It’s A Performance Improvement
Over the Competition!
1-1/2 –InchGPM
2-InchGPM
3-InchGPM
Wilden PS FIT 134 186 279Wilden PS 99 191 245ARO Pro-Series 90 172 237AROExpert-Series 123 172 275Warren Rupp 106 150 235Versa Bolted 123 163 273Versa Clamped 70 185 234
Wilden® Advanced™ FIT Series Pumps
• 2” Aluminum “Drop-In” design
• PX/PS820 Aluminum (FIT)• Threaded manifold drops into
Original™ Series installations• Better containment due to bolted
construction
• PX/PS830 Aluminum (FIT)• Flanged manifold drops into
Advanced™ Series installations• Reduced fastener count compared to
current 800 Advanced™ model• Designed with DFMA to ensure better
access to fasteners for ease of assembly.
New Product Developments
Sept2014
Release
Wilden® Advanced™ FIT Series Pumps
• Stainless-Steel Flanged “Drop-In” Design
• PX/PS430 (1-1/2” flange model)• ANSI and DIN-compatible flanges • Increased flow paths to provide
greater GPM over 400 Advanced™ series. 15% to 20% more GPM
• PX/PS830 (2” flange model)• ANSI and DIN-compatible flanges• Reduced fastener count compared
to current 800 Advanced™ model
New Product Developments
Dec2014
Release
Recommend FIT SolutionWilden® Original™ Series Installation
Recommend FIT SolutionWilden® Advanced™ Series Installation
ToolkitNew Literature
ToolkitUpdated Literature
ToolkitNew Manuals
ToolkitNew Spec Sheets
ToolkitNew Web Pages
ToolkitPublicity