wiffen products - nekeema australia pty ltd wiffen products book.pdf · page 6 the original...
TRANSCRIPT
WIFFEN PRODUCTS 01
BoilingBillyWIFFEN PRODUCTS
‘the new generation
in Boiling water
technology’
WIFFEN PRODUCTS BoilingBilly02
CONTENTSPAGE 2 ECONOMY SERIES
PAGE 3 STANDARD/SUPREME SERIES
PAGE 4 STANDARD/SUPREME SERIES SPECIFICATIONS
PAGE 5 MINI BOIL’N CHILL
PAGE 6 THE ORIGINAL UNDERSINK WATER CHILLER
PAGE 7 BOILING BILLY - GREEN T
PAGE 8 GREEN T BOIL’ N CHILL UNIT MODELS
PAGE 9 ULTIMIX BOIL’N CHILL UNIT
PAGE 10 COMBINED BOILING & CHILLED FILTERED MODELS
PAGE 11 THE ORIGINAL UNDERSINK BOILING BILLY
PAGE 12 DUAL MATE
PAGE 13 AUSTRALIAN AGENTS
PAGE 14 WARRANTY
CONTENTS ECONOMY SERIES
WIFFEN PRODUCTS BoilingBilly BoilingBilly 03
CONTENTSPAGE 2 ECONOMY SERIES
PAGE 3 STANDARD/SUPREME SERIES
PAGE 4 STANDARD/SUPREME SERIES SPECIFICATIONS
PAGE 5 MINI BOIL’N CHILL
PAGE 6 THE ORIGINAL UNDERSINK WATER CHILLER
PAGE 7 BOILING BILLY - GREEN T
PAGE 8 GREEN T BOIL’ N CHILL UNIT MODELS
PAGE 9 ULTIMIX BOIL’N CHILL UNIT
PAGE 10 COMBINED BOILING & CHILLED FILTERED MODELS
PAGE 11 THE ORIGINAL UNDERSINK BOILING BILLY
PAGE 12 DUAL MATE
PAGE 13 AUSTRALIAN AGENTS
PAGE 14 WARRANTY
Model Capacity No. of Cups
Cups/ Hr Rating Height
Width
Depth No. Litres Recovery Kw
JR2.5 2.5 14 110 2.4 400 310 165
JR5 5 25 110 2.4 400 310 165
JR7.5 7.5 38 110 2.4 460 310 165
SPECIFICATIONS 1 CUP (200ML CUPS)
Specifications are subject to change without notice.
WALL MOUNTED WITH A REMOVABLE FRONTCOVER AND IS SIMPLE TO SERVICE IF REQUIRED
• Wall mounted.
• White coloured case.
• 2.5 - 7.5 litre.
ECONOMYSERIES
JR SERIES2.5-5 LITRE
DIMNESIONS IN mmBENCH TOP
2335INLET
O/FLOW
APPROX300mm
30
HE
IGH
T
90
165
310200
JR SERIES7.5 LITRE
DIMNESIONS IN mmBENCH TOP
2535INLET
O/FLOW
APPROX300mm
30
HE
IGH
T
80
435
180
385285
CONTENTS ECONOMY SERIES
WIFFEN PRODUCTS BoilingBilly04
STANDARDSERIES2.5 - 60 LITRE• Removable front cover.
• Computerised element.
• Colourbond white cover.
• Stainless steel cover (optional)
• Larger units upon request
SUPREMESERIES2.5 - 10 LITRE• Removable front cover.
• Internal pressure limiting valve.
• Computerised element.
BOILING BILLYSUPREME SERIES
STANDARD SERIES
WIFFEN PRODUCTS BoilingBilly BoilingBilly 05
STANDARDSERIES2.5 - 60 LITRE• Removable front cover.
• Computerised element.
• Colourbond white cover.
• Stainless steel cover (optional)
• Larger units upon request
SUPREMESERIES2.5 - 10 LITRE• Removable front cover.
• Internal pressure limiting valve.
• Computerised element.
FULL SERVICE NETWORK
• 7 year warranty on storage tank when fitted with a filter.
• One year - tap, ball valve and element.
• No costly parts.
• Simple to service if required.
OPTIONAL EXTRAS
HOW TO SPECIFY: Determining how many cups of boiling water required at
one time, then specify the corresponding model. If yourequire larger element, place kw rating after the modelnumber, for stainless steel case place SS.
Swivel taps, Twin taps, Water filters, 3.0, 4.8, 6 & 9kwrating. Units can be manufactured to suit your needs.
Model Capacity No. Of Cup/ Hr Rating Height Width No. Cups Recovery Kw mm mm Boiling Billy SBB 2.5 2.5 14 110 2.4 460 390Supreme Series SBB 5 5 25 110 2.4 460 390 SBB 7.5 7.5 38 110 2.4 550 390 SBB 10 10 50 110 2.4 550 390
JE 2.5 2.5 14 110 2.4 365 390 JE 5 5 25 110 2.4 455 390 JE 7.5 7.5 38 110 2.4 550 390Boiling Billy JE 10 10 50 110 2.4 550 390Standa rd Series JE 15 15 75 110/160 2.4/3.0 535 600White, JE 20 20 100 110/160 2.4/3.0 535 600Colourbond or JE 25 25 125 110/160 2.4/3.0 635 600Stainless steel JE 30 30 150 110/160 2.4/3.0 635 600cases. JE 40 40 200 110/160 2.4/3.0 775 600 JE 50 50 250 110/160 2.4/3.0 775 600 JE 60 60 300 110/160 2.4/3.0 840 600
190190190190
180180180180250250250250250250250
Depthmm
Specifications are subject to change without notice. Larger units available upon request.
SPECIFICATIONS ONE CUP (200ML)
Cut out for concealedplumbing
BOILINGBILLY
DIMNESIONS IN mmBENCHTOP
O/FLOW
INLET
APPROX300MM
SUPREME SERIES2.5-10 LITRE
135
2032
HE
IGH
T
190 30
390200
50
35
100
Electric
DIMNESIONS IN mmBENCHTOP
O/FLOW
INLET
APPROX300MM
STANDARD SERIES2.5-10 LITRE
135
2032
HE
IGH
T
180 30
390200
50
35
100
Electric
DIMNESIONS IN mmBENCHTOP
O/FLOW
INLET
APPROX300MM
STANDARD SERIES15 - 60 LITRE
140
2025
HE
IGH
T
250
200 mm
50 mm
300 mm
30
600450
50
40
100
Electric
BOILING BILLYSUPREME SERIES
STANDARD SERIES
WIFFEN PRODUCTS BoilingBilly06
MINIBOIL’N CHILLTWO SYSTEMS IN ONE
• Energy Efficient.
• Environmentally friendly - CFC free.
• New advanced design technology maintains temperature of both boiling and chilled water.
• Internal filter and pressure limiting valve.
• Simple filter changes.
• Wall mounted.
SPECIFICATIONS ELECTRICAL APPROVAL NO. Q01754
Specifications are subject to change without notice.
Model
MBC15/30
MBC30/60
MBC60/100
Litres
2.5
5
10
Rating (KW)
1.8
1.8
1.8
RecoveryCups/ Min
2
2
2
Boiling Water Delivery Cups
15
30
60
Dimensions (mm)H W D590 495 295
690 600 330
690 600 330
Chilled Water Delivery Cups
30
60
100
• Single Phase - 240v 50HZ - requires 10 Amp GPO
• Flex and plugs supplied
• Optional - cyst guard ration (extra)
• Compu terised element with boil dry protection
• Full Australian Service Network
• Full 12 months parts and labour warranty
• Electrically Approved
• Chilled Water Temperature (adjustable)
• Power on Indicator
DIMNESIONS IN mmBENCHTOP
O/FLOW
INLET
APPROX300MM
MINI BOIL ‘N CHILL2.5 LITRE
150
2032
590
295 50
495
255
395
50
70
120
Electric
DIMNESIONS IN mmBENCHTOP
O/FLOW
INLET
APPROX300MM
MINI BOIL ‘N CHILL5 - 10 LITRE
150
2032
690
330 50
600
255
500
50
70
120
Electric
THE ORIGINAL UNDERSINK MINI BOIL’N CHILLWATER CHILLER
WIFFEN PRODUCTS BoilingBilly BoilingBilly 07
MINIBOIL’N CHILLTWO SYSTEMS IN ONE
• Energy Efficient.
• Environmentally friendly - CFC free.
• New advanced design technology maintains temperature of both boiling and chilled water.
• Internal filter and pressure limiting valve.
• Simple filter changes.
• Wall mounted.
SPECIFICATIONS ELECTRICAL APPROVAL NO. Q01754
Specifications are subject to change without notice.
Model
MBC15/30
MBC30/60
MBC60/100
Litres
2.5
5
10
Rating (KW)
1.8
1.8
1.8
RecoveryCups/ Min
2
2
2
Boiling Water Delivery Cups
15
30
60
Dimensions (mm)H W D590 495 295
690 600 330
690 600 330
Chilled Water Delivery Cups
30
60
100
• Single Phase - 240v 50HZ - requires 10 Amp GPO
• Flex and plugs supplied
• Optional - cyst guard ration (extra)
• Compu terised element with boil dry protection
• Full Australian Service Network
• Full 12 months parts and labour warranty
• Electrically Approved
• Chilled Water Temperature (adjustable)
• Power on Indicator
THE ORIGINALUNDERSINK WATER CHILLERCOMPLETE INSTALLATION KIT
• Carafe Tap
• Filter System.
• 3 Pin Power cable.
• Plastic Tubing and Brass Fittings.
• Compressor hermetically sealed auto overload
• Refrigeration R-143a gas charge
• Thermostat (factory set)
• Capacity 1/6hp (MC1014) (1/12hp MC07)
• Stainless Steel 3.6 litre Tank (MC1014) (S/Steel 1.8 litre Tank MC07)
• Powder Coated case
• Maximum Pressure 800kpa / minimum pressure 100kpa
MODEL NO. HEIGHT MM DEPTH MM WIDTH MM WEIGHT KG VOLTS
MC07 280 405 205 13 240 50HZ
MC1014 250 500 180 17 240 50HZ
SPECIFICATIONS
Optional Extra: Stainless Steel Case12 months warranty on all partsSpecifications are subject to change without notice.
Model 301
Model 303/F
THE ORIGINAL UNDERSINK MINI BOIL’N CHILLWATER CHILLER
WIFFEN PRODUCTS BoilingBilly08
It’s fInally here!A boiling water unit that is efficient and 99% recyclable.Not only does it work on water pressure alone, it doesn’t need power zapping water pumps, solenoid valves or electronic taps.
sImple DesIgnIt eliminates costly parts, and has easy maintenance.
no electronIc WasteThe unit has no toxic components that is hazardous to people, as well as the environment.
saves poWerAll units fitted with a 24 hour timer to stop power wastage when not in use.
Come grab yourself the most green unit on the market, get the original Boiling Billy by going into your nearest plumbing outlet or Boiling Billy Distributor.
Product Features
Solid Brass Australian Made Tap
Twin Filter System
350 kpa PLV
Wool Insulation
24/7 Day Timer
Easy and inexpensive to repair
Splash free water delivery
All taps comply with AS1428.1 and 1428.2 (Disabili ty Access)
1/4 turn lever action tap handle
No expensive pumps, solenoid valves or drainage required. Only requires water pressure to operate
Optional - Remote controlled boiling water safety cut off system Font-In bench and Child safety lock
Models AvailableModel No. Boiling Rating Chilled No. Cups (KW) Cups per hr
GTBC 10/40 10 1.8 40
GTBC 20/40 20 2.4 40
GTBC 20/80 20 2.4 80
GTBC 40/40 40 2.4 40
GTBC 40/80 40 2.4 80
Model No. Boiling Rating Cups No. Cups (KW) per hr recovery
GT 1.25 10 1.8 90
GT 2.5 20 2.4 110
GT 5 40 2.4 110
GT 5 (4.8) 40 4.8 220
10 Amp, 15 Amp and 20 Amp units available
GT Model
GREEN T BOIL’N CHILL UNITBOILING BILLY - GREEN ‘T’
WIFFEN PRODUCTS BoilingBilly BoilingBilly 09
Product Features
Solid Brass Australian Made Tap
Twin Filter System
350 kpa PLV
Wool Insulation
24/7 Day Timer
Easy and inexpensive to repair
Splash free water delivery
All taps comply with AS1428.1 and 1428.2 (Disabili ty Access)
1/4 turn lever action tap handle
No expensive pumps, solenoid valves or drainage required. Only requires water pressure to operate
Optional - Remote controlled boiling water safety cut off system Font-In bench and Child safety lock
Models AvailableModel No. Boiling Rating Chilled No. Cups (KW) Cups per hr
GTBC 10/40 10 1.8 40
GTBC 20/40 20 2.4 40
GTBC 20/80 20 2.4 80
GTBC 40/40 40 2.4 40
GTBC 40/80 40 2.4 80
Model No. Boiling Rating Cups No. Cups (KW) per hr recovery
GT 1.25 10 1.8 90
GT 2.5 20 2.4 110
GT 5 40 2.4 110
GT 5 (4.8) 40 4.8 220
10 Amp, 15 Amp and 20 Amp units available
GT Model
GREEN T BOIL’N CHILL UNITBOILING BILLY - GREEN ‘T’
WIFFEN PRODUCTS BoilingBilly010
ULTIMIX BOIL’N CHILL UNIT
THE ULTIMATE UNDER SINK BOIL ANDCHILL UNIT.
• Filter system supplied.
• All fittings are supplied for installation of boiling & chilled modules. ie. twin filter system for all area and combined dual check valve with 350 kpa P.L.V.
• 10 amp power supply is for standard installation.
• Connect to cold water supply only 280-2000 kpa. The water supply must be potable.
• Boiling water module to be connected under bench, only the tap dispenser to be visible.
• Solid brass tap.
• Ceramic disc lever action tap handle.
• Electronic control unit is an integral part of the element, which maintains a temperature within one degree celsius of set point - boil dry protection and micro temp protect circuitry.
• No expensive pumps, solenoid valves.
• Venturi system only requires water pressure to operate
Example if boiling and ambient filtered water is required, specify BBM (check specifications sheet)
OPTIONAL• Remote controlled boiling water safety cut off system
• Under bench font
ULTIMIX BOIL’N CHILL UNIT COMBINED BOILING &CHILLED FILTERED MODELS
WIFFEN PRODUCTS BoilingBilly BoilingBilly 011
ULTIMIX BOIL’N CHILL UNIT
THE ULTIMATE UNDER SINK BOIL ANDCHILL UNIT.
• Filter system supplied.
• All fittings are supplied for installation of boiling & chilled modules. ie. twin filter system for all area and combined dual check valve with 350 kpa P.L.V.
• 10 amp power supply is for standard installation.
• Connect to cold water supply only 280-2000 kpa. The water supply must be potable.
• Boiling water module to be connected under bench, only the tap dispenser to be visible.
• Solid brass tap.
• Ceramic disc lever action tap handle.
• Electronic control unit is an integral part of the element, which maintains a temperature within one degree celsius of set point - boil dry protection and micro temp protect circuitry.
• No expensive pumps, solenoid valves.
• Venturi system only requires water pressure to operate
Example if boiling and ambient filtered water is required, specify BBM (check specifications sheet)
OPTIONAL• Remote controlled boiling water safety cut off system
• Under bench font
COMBINED BOILING & CHILLED FILTERED MODELS
Model Boiling Rating Chilled No. No. Cups (KW) Cups per hr
BBCM10/40 10 1.8 40 BBCM20/40 20 2.4 40
BBCM20/80 20 2.4 80
BBCM40/40 40 2.4 40
BBCM40/80 40 2.4 80
*optional 3, 3.6, 4.8 & 6 Kw
Combined boiling and ambient filtered models
Boiling N umber Cup/Hr Rating Height Width DepthModule of cups recovery kW mm mm mm
BBM10 10 90 1.8 335 180 150
BBM20 20 110 2.4 325 245 290
BBM40 40 110 2.4 480 245 290
Combined chilled and ambient filtered models
Chilled Cups per Litres per Height Width DepthModule hour hour mm mm mm
BCM6 40 7 280 205 405
BCM10 100 10-14 250 180 500
Boiling Water= 200ml Chilled water cups = 160mlSpecifications are subject to change without notice.
Combined boiling and chilled filtered models
BLUE
DOUBLE POWER POINT
1
54 mm
85 mm
150
mm
TYPICAL INSTALLATIONTWIN FILTER SYSTEM
UNDERSIDE OF TAP
220
mm
WHITE
Silicone tube pipe connected to drain clamp and fixed to sink S bend above water level with rubber seal between clamp and drain pipe. Push on silicone tube (3/80)
350 PLV
TO MAINWATERSUPPLY
WHITE
BLACK
CHILLER BWU
COPPER
ORANGE
IN
COPPER
ORANGE
WHITE
WHITE
BLUEBLACK
1/4” BSW(2 Places)
OUT
5/16” Dia.Boiling Water
Outlet
1/4” Dia. Inlet Boiling Water Unit
54mm
1/4” Dia. ChillerOutlet
1/4” Dia. Main Water Supply to Tap
1/4” Dia. ChillerInlet
3/16” Dia. Vent
3/8” Drain
1
ULTIMIX BOIL’N CHILL UNIT COMBINED BOILING &CHILLED FILTERED MODELS
WIFFEN PRODUCTS BoilingBilly012
THE ORIGINALUNDERSINK BOILING BILLYTHE NEW GENERATION INBOILING WATER TECHNOLOGY.IDEAL FOR TEA, COFFEE!
• The unit is located under the sink.
• The copper body comprises a storage tank and an expansion chamber.
• Element controls temperature and boil dry protection.
• Solid brass, rapid action, 1/4 turn lever tap handle or spring loaded tap handle.
• Solid brass swivel bi-flo spout.
• AS 3500 spill tray not required up to seven litres.
• No expensive pumps, solenoid valves or drainage required.
A 350 kpa pressure limiting valve must be fitted for maximum efficiency in all areas.
RECOMMENDED:
A filter system is to be fitted to all units
OPTIONAL:
• Remote controlled boiling water safety cut off system
Specifications are subject to change without notice.
• Optional 4.8 & 6kw
Model Capacity No. Of Cup/Hr Rating Height Width No. Litres Cups Recovery Kw mm mm
TD 1.25 1.25 10-13 90 1.8 335 180
TD 2.5 2.5 15-20 110 2.4 325 245
TD 5 5 30-40 110 2.4 480 245
SPECIFICATIONS ONE CUP (200ML CUPS)
BOIL
ING
BIL
LY
UN
DERS
INK
SERI
ES 150
290
290
Depthmm
100
10 AMP
BOILINGBILLY
130
400
max
H
WO
THE ORIGINAL DUAL MATEUNDERSINK BOILING BILLY
WIFFEN PRODUCTS BoilingBilly BoilingBilly 013
THE ORIGINALUNDERSINK BOILING BILLYTHE NEW GENERATION INBOILING WATER TECHNOLOGY.IDEAL FOR TEA, COFFEE!
• The unit is located under the sink.
• The copper body comprises a storage tank and an expansion chamber.
• Element controls temperature and boil dry protection.
• Solid brass, rapid action, 1/4 turn lever tap handle or spring loaded tap handle.
• Solid brass swivel bi-flo spout.
• AS 3500 spill tray not required up to seven litres.
• No expensive pumps, solenoid valves or drainage required.
A 350 kpa pressure limiting valve must be fitted for maximum efficiency in all areas.
RECOMMENDED:
A filter system is to be fitted to all units
OPTIONAL:
• Remote controlled boiling water safety cut off system
Specifications are subject to change without notice.
• Optional 4.8 & 6kw
Model Capacity No. Of Cup/Hr Rating Height Width No. Litres Cups Recovery Kw mm mm
TD 1.25 1.25 10-13 90 1.8 335 180
TD 2.5 2.5 15-20 110 2.4 325 245
TD 5 5 30-40 110 2.4 480 245
SPECIFICATIONS ONE CUP (200ML CUPS)
BOIL
ING
BIL
LY
UN
DERS
INK
SERI
ES 150
290
290
Depthmm
DUALMATENOW YOU CAN HAVE BOILING WATER ANDHOT WATER FROM THE ONE UNIT
• All main valves supplied.
• Simple installation.
• Supplied with 2 metre 10 amp cord and plug with insulated earth pins.
• Ideal for office and work staff kitchens.
• Saves power and space.
• Replaces the need to specify separate boiling water and hot water unit, one unique cylinder does both.
• Dual Mates are compact and sit in under the sink and supplies boiling water for tea and coffee via a brass chrome plated tap and hot water to the usual basin set mixed all from one unit.
DM
220ml-Cups Hot Water Boiling Water Height Width Depth KW Boiling Water (Ltrs) Recovery Cups HR mm mm mm
40/12 40 12 110 480 245 290 2.4
SPECIFICATIONS BOILING WATER CUPS - 200ML
Optional: 4.8kw & 6kw Specifications are subject to change without notice.
Tap Base Size
To Hot Tap
HotWater
Hot
Cold
10 amps
TVA
TYPICAL INSTALLATION
ECV
ColdWaterSupply
PLV350KPa
ColdWater
BoilingWater
To Cold Tap
To ECV
LimitingValve
TVA
Hot
Hole Size
36o
Cold
THE ORIGINAL DUAL MATEUNDERSINK BOILING BILLY
WIFFEN PRODUCTS BoilingBilly014
QLDMark Anderson SalesBuilding 4/84 Ingleston RdWakerley, QLD 4154Ph: 07 3890 8011Fax: 07 3890 8022Email: [email protected]: www.markandersonsales.com.au
VIC/SAInterchange Sales and MarketingUnit 4/49 Corporate BlvdBayswater, VIC 3153Ph: 03 9729 6411 Fax: 03 9729 5722Email: [email protected]
WAComplete Enviro SolutionsUnit 3/36 Irvine DrMazaga, WA 6090Ph: 08 9248 8802Fax: 08 9248 8872Email: [email protected]: www.completeenvirosolutions.com.au
TASGJ Trade Supplies8 Fergusson DriveQuoiba TAS 7310Ph: 03 6424 7008Fax: 03 6424 7009Email: [email protected]
NSWNekeemaUnit 2, 10 Doyle AveUnanderra NSW 2526Ph: 02 4272 3264Fax: 02 9332 6482Email: [email protected]: www.nekeema.com.au
AUSTRALIAN AGENTSAUSTRALIAN AGENTS WARRANTY
WIFFEN PRODUCTS BoilingBilly BoilingBilly 015
QLDMark Anderson SalesBuilding 4/84 Ingleston RdWakerley, QLD 4154Ph: 07 3890 8011Fax: 07 3890 8022Email: [email protected]: www.markandersonsales.com.au
VIC/SAInterchange Sales and MarketingUnit 4/49 Corporate BlvdBayswater, VIC 3153Ph: 03 9729 6411 Fax: 03 9729 5722Email: [email protected]
WAComplete Enviro SolutionsUnit 3/36 Irvine DrMazaga, WA 6090Ph: 08 9248 8802Fax: 08 9248 8872Email: [email protected]: www.completeenvirosolutions.com.au
TASGJ Trade Supplies8 Fergusson DriveQuoiba TAS 7310Ph: 03 6424 7008Fax: 03 6424 7009Email: [email protected]
NSWNekeemaUnit 2, 10 Doyle AveUnanderra NSW 2526Ph: 02 4272 3264Fax: 02 9332 6482Email: [email protected]: www.nekeema.com.au
AUSTRALIAN AGENTS WARRANTY7 YEAR WARRANTYShould any part of the boiling water unit fail within:-1. Year of installation, that part will be replaced or repaired by the manufacturer or its
authorised service agent free of charge as per warranty conditions 1 to 6 and warranty exclusions 1 to 4.
Wiffen Products Pty. Ltd. hereby warrants that in addition to the protection given to Australian consumers under the Trade Practices Act, any other similar Act or Law, we will if necessary replace or repair on the terms and conditions set out hereunder any boiling water unit manufactured by this company.
WARRANTY CONDITIONS1. The boiling water unit must be installed to comply with all relevant statutory and local
requirements for the area where the boiling water unit is installed.2. The boiling water unit must be installed in accordance with manufacturers installation
instructions supplied with the unit.3. When a boiling water unit is repaired or replaced under this warranty, the component
or boiling water unit replaced does not have the benefit of a new warranty and only the balance of the original warranty period will remain effective.
4. Only the boiling water unit and genuine company replacement parts are covered by this warranty. Electrical or plumbing parts supplied by the installer are not covered by this warranty.
5. The cost of insurance, travelling and transport between the installed site and the nearest manufacturers authorised agents premises will be to the account of the customer where unit is installed outside the boundaries of the metropolitan area as defined by the manufacturer or beyond 25km from a manufacturers or an authorised agent in a regional town or centre.
6. Where a filter is specified by the manufacturer or supplied as original equipment with the boiling water unit, the filter that is specified or supplied must be fitted on the cold water supply to the boiling water unit, and maintained by the owner in a serviceable and working condition, while ever the boiling water unit is in service. Failure to fit and maintain the filter will render this warranty void.
Guarantee period - Twelve (12) months from the date of sale by Wiffen Products Pty. Ltd or Twentyfour (24) months from date of manufacture by Wiffen Products Pty. Ltd., whichever period shall first expire.
WARRANTY EXCLUSIONSThe warranty may become void by the following exclusions and service charge for labour and parts (if necessary) could become a cost to the owner.1. Failure due to misuse and/or incorrect installation; Acts of God; Water conditions;
Accidental Damage; Unauthorised attempts at repair of the boiling water unit.2. Where there is a failure of the electricity or water supply; where water leaks are caused
by the plumbing and not the boiling water unit or its components; where there is no flow of hot water due to faulty plumbing or a filter blockage; where the complaint is related to low or high water pressure or excessive water pressure; where it is found that there is nothing wrong with the boiling water unit.
3. Repairs to a boiling water unit due to scale formation or where the boiling water unit has been fitted to a hard or harmful water supply or the recommended or supplied filter has not been fitted and maintained.
4. Where the boiling water unit has been installed in a position that does not comply with the manufacturers installation instructions or relevant statutory requirements or subject to any statutory provisions to the contrary claims for damage to walls, furniture, carpets, foundations or the need for major dismantling or removal of cupboards, doors or walls or any other consequential loss either directly or indirectly due to leakage from a boiling water unit. Chiller units have a twelve month warranty on parts and labour from date of sale. Chiller units have the same warranty exclusions as boiling water units.
AUSTRALIAN AGENTS WARRANTY
ISSUE 4 / 2014
A.B.N. 95 073 810 616
1/33 Cedar Parade, Moolap,Victoria, Australia, 3221.Tel: (03) 5248 7072Fax: (03) 5248 7272
WIFFEN PRODUCTS PTY LTD
AS 3498 Lic. W359