wide area networks(wans) lecture week 2. point-to-point protocol (ppp) accessing the wan
TRANSCRIPT
![Page 1: Wide Area Networks(WANs) Lecture Week 2. Point-to-Point Protocol (PPP) Accessing the WAN](https://reader030.vdocuments.mx/reader030/viewer/2022032708/56649e5f5503460f94b59d85/html5/thumbnails/1.jpg)
Wide Area Networks(WANs)Lecture Week 2
![Page 2: Wide Area Networks(WANs) Lecture Week 2. Point-to-Point Protocol (PPP) Accessing the WAN](https://reader030.vdocuments.mx/reader030/viewer/2022032708/56649e5f5503460f94b59d85/html5/thumbnails/2.jpg)
Point-to-Point Protocol (PPP)
Accessing the WAN
![Page 3: Wide Area Networks(WANs) Lecture Week 2. Point-to-Point Protocol (PPP) Accessing the WAN](https://reader030.vdocuments.mx/reader030/viewer/2022032708/56649e5f5503460f94b59d85/html5/thumbnails/3.jpg)
WAN Encapsulation• WAN technologies operate at both Physical and
Data-link layers of the OSI models, and that higher-layer protocols such as IP are encapsulated when sent across the WAN link.
• A WAN is usually terminated on a Cisco device’s serial interface.
• Serial interfaces support a wide variety of WAN encapsulation types
• By default, a serial interface will utilize HDLC for encapsulation
![Page 4: Wide Area Networks(WANs) Lecture Week 2. Point-to-Point Protocol (PPP) Accessing the WAN](https://reader030.vdocuments.mx/reader030/viewer/2022032708/56649e5f5503460f94b59d85/html5/thumbnails/4.jpg)
Other supported encapsulations protocols
• SDLC• PPP• LAPB(Link Access Procedure, Balanced)• Serial Line Internet Protocol (SLIP)
- A standard protocol for point-to-point serial connections using TCP/IP. SLIP has been largely replaced by PPP.
• Frame-Relay• X.25• ATMNote:- Regardless of the WAN encapsulation used, it must be
identical on both sides of a point-to-point link
![Page 5: Wide Area Networks(WANs) Lecture Week 2. Point-to-Point Protocol (PPP) Accessing the WAN](https://reader030.vdocuments.mx/reader030/viewer/2022032708/56649e5f5503460f94b59d85/html5/thumbnails/5.jpg)
HDLC Encapsulation• High-Level Data-link Control (HDLC) is a WAN
encapsulation protocol used on dedicated point-to-point serial lines.
• Though HDLC is technically an ISO standard protocol, Cisco’s implementation of HDLC is proprietary, and will not work with other routers.
• HDLC is also Cisco’s default encapsulation type for serial point-to-point links.
• HDLC provides no authentication mechanism
![Page 6: Wide Area Networks(WANs) Lecture Week 2. Point-to-Point Protocol (PPP) Accessing the WAN](https://reader030.vdocuments.mx/reader030/viewer/2022032708/56649e5f5503460f94b59d85/html5/thumbnails/6.jpg)
PPP EncapsulationPoint-to-Point Protocol (PPP) is a standardized
WAN encapsulation protocol that can be used on a wide variety of WAN technologies, including:
• Dedicated point-to-point serial lines• Asynchronous dial-up links• ISDN
![Page 7: Wide Area Networks(WANs) Lecture Week 2. Point-to-Point Protocol (PPP) Accessing the WAN](https://reader030.vdocuments.mx/reader030/viewer/2022032708/56649e5f5503460f94b59d85/html5/thumbnails/7.jpg)
PPP has four components:• Physical – standard for physical serial
communication (such as EIA/TIA-232-C, V.35, ISDN, etc.).
• HDLC – for encapsulating packets into frames over serial lines.
• LCP – for establishing, maintaining, and terminating point-to-point links.
• NCP – allows multiple Layer-3 protocols (such as IP and IPX) to be encapsulated into frames.
![Page 8: Wide Area Networks(WANs) Lecture Week 2. Point-to-Point Protocol (PPP) Accessing the WAN](https://reader030.vdocuments.mx/reader030/viewer/2022032708/56649e5f5503460f94b59d85/html5/thumbnails/8.jpg)
PPP supports several features that standalone HDLC does not
• Authentication – secures the communication by forcing the sending/receiving devices to identify themselves with a username and password. PPP supports two forms of authentication – PAP and CHAP.
• Compression – improves efficiency on slow links. PPP supports two forms of compression: Stac and Predictor.
• Multilink – allows multiple channels to be bundled or trunked together to combine the bandwidth. The bundled channels are treated as one logical channel.
• Callback – provides security and billing services. Allows a client to first dial a PPP server, disconnect, and then have the PPP server call the client back.
![Page 9: Wide Area Networks(WANs) Lecture Week 2. Point-to-Point Protocol (PPP) Accessing the WAN](https://reader030.vdocuments.mx/reader030/viewer/2022032708/56649e5f5503460f94b59d85/html5/thumbnails/9.jpg)
PPP supports two methods of authentication, PAP and CHAP.
• PAP (Password Authentication Protocol) sends passwords in clear text, and thus does not provide much security.
• CHAP (Challenge Handshake Authentication Protocol) uses MD5 to apply an irreversible hash
![Page 10: Wide Area Networks(WANs) Lecture Week 2. Point-to-Point Protocol (PPP) Accessing the WAN](https://reader030.vdocuments.mx/reader030/viewer/2022032708/56649e5f5503460f94b59d85/html5/thumbnails/10.jpg)
Configuring Basic PPP• To configure a serial interface for PPP
encapsulation:• Router(config)# int s0/0• Router(config-if)# encapsulation pppTo configure PPP authentication:• Router(config)# hostname Router1• Router(config)# username Router2 password
PASSWORD• Router(config)# int s0/0• Router(config-if)# ppp authentication chap
![Page 11: Wide Area Networks(WANs) Lecture Week 2. Point-to-Point Protocol (PPP) Accessing the WAN](https://reader030.vdocuments.mx/reader030/viewer/2022032708/56649e5f5503460f94b59d85/html5/thumbnails/11.jpg)
configure pap authentication:• Router(config)# int s0/0• Router(config-if)# ppp authentication papTo view the encapsulation configured on the
interface:• Router# show interface s0/0To troubleshoot PPP authentication between two
routers:Router# debug ppp authentication
![Page 12: Wide Area Networks(WANs) Lecture Week 2. Point-to-Point Protocol (PPP) Accessing the WAN](https://reader030.vdocuments.mx/reader030/viewer/2022032708/56649e5f5503460f94b59d85/html5/thumbnails/12.jpg)
Describe the Fundamental Concepts of Point-to-Point Serial Communication
• Describe the concept of serial communication as the basis of WAN technologies
![Page 13: Wide Area Networks(WANs) Lecture Week 2. Point-to-Point Protocol (PPP) Accessing the WAN](https://reader030.vdocuments.mx/reader030/viewer/2022032708/56649e5f5503460f94b59d85/html5/thumbnails/13.jpg)
Describe the Fundamental Concepts of Point-to-Point Serial Communication…
• Explain how two or more data streams are transported across a single physical connection using TDM
![Page 14: Wide Area Networks(WANs) Lecture Week 2. Point-to-Point Protocol (PPP) Accessing the WAN](https://reader030.vdocuments.mx/reader030/viewer/2022032708/56649e5f5503460f94b59d85/html5/thumbnails/14.jpg)
Describe the Fundamental Concepts of Point-to-Point Serial Communication…
• Define the location of the demarcation point relative to customer and service provider networks
![Page 15: Wide Area Networks(WANs) Lecture Week 2. Point-to-Point Protocol (PPP) Accessing the WAN](https://reader030.vdocuments.mx/reader030/viewer/2022032708/56649e5f5503460f94b59d85/html5/thumbnails/15.jpg)
Describe the Fundamental Concepts of Point-to-Point Serial Communication…
• Explain the terms DTE and DCE with relative to the location of devices in a network
![Page 16: Wide Area Networks(WANs) Lecture Week 2. Point-to-Point Protocol (PPP) Accessing the WAN](https://reader030.vdocuments.mx/reader030/viewer/2022032708/56649e5f5503460f94b59d85/html5/thumbnails/16.jpg)
Describe the Fundamental Concepts of Point-to-Point Serial Communication…
• Describe how high-level data link control (HDLC) uses one of three frame types to encapsulate data
![Page 17: Wide Area Networks(WANs) Lecture Week 2. Point-to-Point Protocol (PPP) Accessing the WAN](https://reader030.vdocuments.mx/reader030/viewer/2022032708/56649e5f5503460f94b59d85/html5/thumbnails/17.jpg)
Describe the Fundamental Concepts of Point-to-Point Serial Communication…
• Explain when and how to configure HDLC encapsulation on a router
![Page 18: Wide Area Networks(WANs) Lecture Week 2. Point-to-Point Protocol (PPP) Accessing the WAN](https://reader030.vdocuments.mx/reader030/viewer/2022032708/56649e5f5503460f94b59d85/html5/thumbnails/18.jpg)
Describe the Fundamental Concepts of Point-to-Point Serial Communication…
• Describe the procedure to follow when troubleshooting a serial connection
![Page 19: Wide Area Networks(WANs) Lecture Week 2. Point-to-Point Protocol (PPP) Accessing the WAN](https://reader030.vdocuments.mx/reader030/viewer/2022032708/56649e5f5503460f94b59d85/html5/thumbnails/19.jpg)
Describe Point-to-Point Concepts
• Describe PPP in terms of its use in WAN links
![Page 20: Wide Area Networks(WANs) Lecture Week 2. Point-to-Point Protocol (PPP) Accessing the WAN](https://reader030.vdocuments.mx/reader030/viewer/2022032708/56649e5f5503460f94b59d85/html5/thumbnails/20.jpg)
Describe Point-to-Point Concepts…
• Describe the general function of each layer of PPP architecture
![Page 21: Wide Area Networks(WANs) Lecture Week 2. Point-to-Point Protocol (PPP) Accessing the WAN](https://reader030.vdocuments.mx/reader030/viewer/2022032708/56649e5f5503460f94b59d85/html5/thumbnails/21.jpg)
Describe Point-to-Point Concepts…
• Define the three phases of PPP session establishment
![Page 22: Wide Area Networks(WANs) Lecture Week 2. Point-to-Point Protocol (PPP) Accessing the WAN](https://reader030.vdocuments.mx/reader030/viewer/2022032708/56649e5f5503460f94b59d85/html5/thumbnails/22.jpg)
Describe Point-to-Point Concepts…
• Explain the role of the LCP in PPP
![Page 23: Wide Area Networks(WANs) Lecture Week 2. Point-to-Point Protocol (PPP) Accessing the WAN](https://reader030.vdocuments.mx/reader030/viewer/2022032708/56649e5f5503460f94b59d85/html5/thumbnails/23.jpg)
Describe Point-to-Point Concepts… • Describe the characteristics of NCP
![Page 24: Wide Area Networks(WANs) Lecture Week 2. Point-to-Point Protocol (PPP) Accessing the WAN](https://reader030.vdocuments.mx/reader030/viewer/2022032708/56649e5f5503460f94b59d85/html5/thumbnails/24.jpg)
Configure PPP on a Serial Interface…
• Explain the purpose of the commands used to configure and verify PPP connections
![Page 25: Wide Area Networks(WANs) Lecture Week 2. Point-to-Point Protocol (PPP) Accessing the WAN](https://reader030.vdocuments.mx/reader030/viewer/2022032708/56649e5f5503460f94b59d85/html5/thumbnails/25.jpg)
Configure PPP on a Serial Interface…
• Explain the output of the show interfaces serial command
![Page 26: Wide Area Networks(WANs) Lecture Week 2. Point-to-Point Protocol (PPP) Accessing the WAN](https://reader030.vdocuments.mx/reader030/viewer/2022032708/56649e5f5503460f94b59d85/html5/thumbnails/26.jpg)
Configure PPP on a Serial Interface…
• Explain the output of the debug ppp command
![Page 27: Wide Area Networks(WANs) Lecture Week 2. Point-to-Point Protocol (PPP) Accessing the WAN](https://reader030.vdocuments.mx/reader030/viewer/2022032708/56649e5f5503460f94b59d85/html5/thumbnails/27.jpg)
Configuring PPP with Authentication
• Differentiate between PAP and CHAP
![Page 28: Wide Area Networks(WANs) Lecture Week 2. Point-to-Point Protocol (PPP) Accessing the WAN](https://reader030.vdocuments.mx/reader030/viewer/2022032708/56649e5f5503460f94b59d85/html5/thumbnails/28.jpg)
Configuring PPP with Authentication…
• Outline the PPP encapsulation and authentication process on a flow chart
![Page 29: Wide Area Networks(WANs) Lecture Week 2. Point-to-Point Protocol (PPP) Accessing the WAN](https://reader030.vdocuments.mx/reader030/viewer/2022032708/56649e5f5503460f94b59d85/html5/thumbnails/29.jpg)
Configuring PPP with Authentication…
• Explain how to configure a PPP connection with authentication
![Page 30: Wide Area Networks(WANs) Lecture Week 2. Point-to-Point Protocol (PPP) Accessing the WAN](https://reader030.vdocuments.mx/reader030/viewer/2022032708/56649e5f5503460f94b59d85/html5/thumbnails/30.jpg)
Configuring PPP with Authentication…
• Explain the output of the debug ppp authentication command
![Page 31: Wide Area Networks(WANs) Lecture Week 2. Point-to-Point Protocol (PPP) Accessing the WAN](https://reader030.vdocuments.mx/reader030/viewer/2022032708/56649e5f5503460f94b59d85/html5/thumbnails/31.jpg)
Thank you