Garland’s White-Knight® Plus/White-Stallion® Plus

System

Features & Benefits

• Chemically Engineered Reinforcement– The Polymers Incorporated in this High Strength

Urethane Give it 2400 psi./in. of Tensile Strength• Multi-Surface Restoration

– White-Knight Plus/ White-Stallion Plus Can be Used to Coat an Entire Aged Single-Ply, Metal, Smooth BUR and Modified Bitumen Roof System

• Reduced Application Labor– Eliminating the Need for Secondary Embedded

Reinforcements Drastically Reduces Labor and Application Time

Surface Preparation• The Surface Must be Clean, Sound, Dry

and Free of Any Materials That Would Inhibit Proper Adhesion of The Coating

• To Achieve a Suitable Surface, Prior to the Application of the Coating, the Use of Industrial Cleaner, Scraping, Power Booming, Vacuuming or Other Means May be Required

• Cleaning Should Always be Performed Observing Responsible Trade Practices and Cleaner Residue From Incomplete Rinsing of Low Lying Areas Should Be Avoided

• In Any Case, Any Existence of Talc or Other Separator Agents on the Roofing Surface is Not Acceptable

White-Knight Plus/ White-Stallion Plus Base Coat• Benefits of White-Knight Plus/ White-Stallion

Plus Base Coat– Tinted Base Coat

• Ensures Contractor Applies Coating at Proper Coverage Rates by Visually Identifying Where the Finish Coat Needs to be Applied Heavier

White-Knight Plus/ White-Stallion Plus• Benefits of White-Knight

Plus/ White-Stallion Plus– Cool Roof Coatings

• Help Reduce Building Energy Costs

• Provides UV Protection for Membrane System

• Extends the Life Cycle of the Waterproofing Membrane

– Extreme Performance• 2400 psi Tensile Strength• 340% Elongation• 0.87 Initial Reflectance• 0.89 Initial Emittance• SRI 110 (LEED Standard 78)

Application Excellence

• SinglePly

Single-Ply Application Rates

• White-Knight Plus Base Coat at 2 Gallons Per Square (0.81 l/m2) (32 Wet Mils) Over All Seams, Flashings and Penetrations

• White-Knight Plus at 2 Gallons Per Square (0.84 l/m2)(32 Wet Mils) Over Entire Roof

White-Knight Plus/ White-Stallion Plus Over Single-Ply EPDM, PVC, TPO and CSPE

Top Coat Application Finished Roof

Power Wash Make Necessary Repairs

Application Excellence

• Modified Bitumen

BUR & Modified Bitumen Application Rates• All-Knight Primer at ½

Gallon Per Square (0.21 l/m2) 8 Wet Mils – Only Needed on New

Systems• White-Knight Plus Base

Coat at 2 Gallons Per Square (0.81 l/m2) 32 Wet Mils

• White-Knight Plus at 2 Gallons Per Square (0.81 l/m2) 32 Wet Mils

White-Knight Plus/ White-Stallion Plus Over BUR & Modified

Mineral Modified Completed System

Application Excellence

• Metal

White-Knight Plus/ White-Stallion Plus Application Rates• Prime Metal

– Always Perform an Adhesion Test on Metal

• White-Knight Plus Base Coat at 2 Gallons Per Square (0.81 l/m2) 32 Wet Mils Over All Seams, Flashings, Fasteners and Penetrations

• White-Knight Plus at 2 Gallons Per Square (0.81 l/m2) 32 Wet Mils Over Entire Roof

White-Knight Plus/ White-Stallion Plus Over Metal

Base Coat Seams & Fasteners

Prime Roof SystemPower Wash

Top Coat Application

Finished Roof

Text Slide

• Text– Text

• Text

Summary• White-Knight Plus/ White-Stallion Plus is a Urethane Based

Roof Coating Designed to Improve the Life Cycle and the Energy Efficiency of Your Roof By Reflecting the Sun’s Harmful Rays as Well as Adding Waterproofing Protection to Your System

• These Systems Provide a White ENERGY STAR®, Title 24, LEED®, and CRRC Rated, Reflective Surface

• These Systems Can Save Your Customer Money by Reducing the Building’s Operational Energy Costs as Well as Their Maintenance Costs

• These Systems Will Extend the Life of Your Roofing System by Reducing The UV Degradation of Your Membrane