whirlpool use& care guide and... · to remove it for cleaning, press the release and pull...

12
Model lA4OOOXK Regular Capacity whirlpool AUTOMATIC WASHER Use& Care Guide COPY Your Model and Serial Numbers Here I When You need service, or call with Q question, hove this information reauy: ‘. Complete Model and Serial Numbers --- (from the Pkve under the lid near the _-~ ‘&.-le hr,,-7t,.er hinge). 2. Purchase dote from sales slip (or date Installed),

Upload: others

Post on 30-Sep-2020

2 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: whirlpool Use& Care Guide and... · To remove it for cleaning, press the release and pull straight out. lnstruc- tions for cleaning are printed on the bottom of the filter . Using

Model lA4OOOXK Regular Capacity

whirlpool AUTOMATIC WASHER

Use& Care Guide

COPY Your Model and Serial Numbers Here I

When You need service, or call with Q question, hove this information reauy: ‘. Complete Model and Serial Numbers

---

(from the Pkve under the lid near the _-~

‘&.-le hr,,-7t,.er

hinge). 2. Purchase dote from sales slip (or date Installed),

Page 2: whirlpool Use& Care Guide and... · To remove it for cleaning, press the release and pull straight out. lnstruc- tions for cleaning are printed on the bottom of the filter . Using

I ’ I’ Before using your Washer

Please read this booklet to be sure your washer IS installed and used properly It WIII help you get the best results and longest life your washer was designed to give

You are personally responsi- ble for making sure that your washer... l Is Installed by a qualified installer l Is properly Walled and leveled on a floor thai can support the weight.’ l Is connected to the right kind of outlet, electric supply, water supply and drain. l Is properly electrically grounded.’ l Is used only for jobs normally expected of home automatic washers l Is properly malntained. l Is protected from the weather l Is not run by children or anyone unable to operate it properly

Remove the Consumer Buy Guide label It WIII be easier to remove before the washer IS used

You may want to wipe out the basket with a damp cloth before using to remove dust from storing or shIppIng

SPECIAL INSTRUCTIONS: See the laundry Guide for tips on deter- gents, other laundry aids and instructions for washing special items.

See the Installation InstructIons for complete InformatIon.

CAUTION: Store laundry deter- gent and additives in a cool, dry

Contents Before Using Your Washer 2 Loading Your Washer 1’ 3 Understanding Your Washer 3 Cleaning the Lint Filter 3 Using Your Washer 4 Important Detergent Information 6 For a Pre Wash 7 For Rinsing Only 7 For Spinning Only 7 Cycle Operation 8

KNIT GENTLE 8 REGULAR HEAVY.. : 8 SOAK 8

If You Need Service or Help 10 1 Before Calling for Service 10 2 If You Need Service 11 3 If You Havea Problem 11

2

Page 3: whirlpool Use& Care Guide and... · To remove it for cleaning, press the release and pull straight out. lnstruc- tions for cleaning are printed on the bottom of the filter . Using

loading your

For best washing results and energy savings, sort the laundry carefully. 1. Sort the laundry into loads. l Group the laundry into loads that can be washed and dried together. See the Laundry Guide for informa- tion and samples of typical loads. l Try to mix large and small items for best movement in the washer. 2. Measure Detergent; Add to Washer Basket. l See detergent information on page 6 and in Section IV of the Laundry Guide. l Add dry bleach or water condi- tioner (not fabric softener) if used. Follow the package directions carefully. 3. Dilute liquid Bleach Before Add- ing to the Washer Basket. l See the “Laundry Aids” section of the Laundry Guide for more information. 4. load the Washer. l Spread the load evenly. (Don’t put all the towels on one side and a few wash cloths on the other.) An unbal- anced load can cause the washer to shake during spinning. l Load without packing so items can move freely for best cleaning and least wrinkling. 5. Add Diluted Fabric Softener Only to the Deep Rinse Cycle. . DO NOT ADD FABRIC SOFTENER TO THE WASH. Fabric softeners can com- bine with soap or detergent to make greasy stains on fabrics.

Understanding your Washer

This automatic washer has three :ycles Each IS designed for a fabric

‘we It has a TEMPERATURE SELECTOR

-‘ou can select the wash water temper- Are best for the amount of soil and iabnc type In each load.

You can control the amount of ,vater that fills the washer by moving the Control Knob according to instructions ‘In page 5.

Sections In this Use & Core Guide 30 Into detail on the “what and why” Jf each setting. Read this and the laun- ?iy Guide carefully to get the best cleaning results.

Cleaning the lint Filter

Water runs through the lint filter nihenever the washer agitates. Check it often to make sure it’s clean and filter- ~ng at its best

To remove it for cleaning, press the release and pull straight out. lnstruc- tions for cleaning are printed on the bottom of the filter

Page 4: whirlpool Use& Care Guide and... · To remove it for cleaning, press the release and pull straight out. lnstruc- tions for cleaning are printed on the bottom of the filter . Using

Using Your Washer

Your automatic dasher IS easy to use To make It even easier, read the followlng steps before starting your first load

Stari your ;Yasher after you put In detergent, the load, and any other laundry aids according to information on page 3

1. Set the TEMPERATURE SELECTOR. l Match the wash water temperature io the type of fabrics and so~is being washed All rinses are cold

2. Select a Cycle and Start the Washer. l Push ihe Cycle Control Knob in and turn It to ihe right (clockwise) l Stop when the pointer is on the nL’m~ ber of minutes you wani In the cycle you want. NOTE: In the REGULAR HEAVY and KNIT GENTLE Cycles, ihe washer will fill only if the Control Knob points to a fill area l InstructIons on which cycle to use for each fabric hype are under the lid. l To start ihe washer, pull ihe Cycle Control Knob out When the cycle IS over, the washer ~111 stop l To stop the washer at any time during a cycle, push the Control Knob in. Pull it out to restart ihe washer l To change a setting, push ihe Con- trol Knob In io stop the washer. Then turn the Control Knob to the right (clock- wise] to the setting you want Pull the knob out to start the washer

Page 5: whirlpool Use& Care Guide and... · To remove it for cleaning, press the release and pull straight out. lnstruc- tions for cleaning are printed on the bottom of the filter . Using

i

3. To Use Less Wash Water. When you have only a few Items

to wash, you may want to use less water to help save energy. Setting the washer to f//i wdh iess water a/so sets it for u shorter agitation time l The washer WI// fill to Its highest level (about 16.9 gallons or 64.0 liters) when the Control Knob potnts to a ftll area l To use less water, push the Control Knob In and turn to the right (clockwtse) to a fill area in either the REGULAR HEAVY or KNIT GENTLE Cycle.

l Puli the Control Knob out, the washer will start to fill l When there IS as much water as you want In the washer, push the Control Knob tn. SLOWLY turn the Control Knob to the right, past the fill area. Pull the knob out to start

l You can have as many as 6, or as few as 2, minutes of agitation with a low water level in the REGULAR HEAVY Cycle. In the KNIT GENTLE Cycle, you will have 2 to 4 minutes of agitation. l For the SOAK Cycle, the washer fills to its highest level with water of the selected temperature. For a rinse, the washer fills to Its highest level with cold water

4. Load Sizes. For the best cleaning results, tne

load should move freely In the water Watch for rollover An Item (Itke a sock) should sink and come up again later

Page 6: whirlpool Use& Care Guide and... · To remove it for cleaning, press the release and pull straight out. lnstruc- tions for cleaning are printed on the bottom of the filter . Using

Important Detergent Information

'?pieri a +c : ,,' _ -3ap: C71e3:

D\, loose?lng ~, i~l <I? by holding 8A r tk,e dater sc I/ ;~IGI 1. o.vay If psot erougk, dete.gent :, usea, ~011 art:: hrt ca7 sett!e 230 11 +he items I- +qe ,ood

SOAP h#~vk> : ,ei. lr ‘,a-* ‘,v~.:‘,:’ !J 4 grains hqrdress: lr! harder water, both the wasI; arc ‘bnse water should be softened use enough soap tc make cbout Ii ; to i lrccles (3 8 to 5 5 cm! of suds

DETERGENT &arks In h;:9 3’ so+: water Package directions are usuallv based on soft water and

.*, -Isher< W+ r‘c)r~8cl~sI.:‘-? tuck Use more detergent

? fcr mar3 ,b/ate~ Z t3r heav’; greasd SC 3 Iv SOlIS C It the detergent IS 1~ :, phospnate 4 for cord-water ti’ashes DETERGENT SUDS. There are

high, normal and low sudsing Patti aered aetergents If the recom mended amount of detergent makes toc much suds, switch +o a lower sudsing brand DO NOT REDUCE THE AMOUNT of detergent

Use the following chart OS beginning suggestions for powdered and liquid detergent amounts See yourbundry Guide for more infor- mation (pages 14-22).

WATER HARDNESS IN GRAINS

O-4 Grains 4-10 Grains IO-20 Grains

Powdered Detergents Low Suds j; cup [I75 ml] 1 1 cups (250-300 1’~.1’2 cups

rnL) (300-350 mL) Normal Suds 1’; cups (300 ml] 1~~ cups (425 ml] 2-2’A cups

(475-525 ml) High Suds ?-I’ A cups 2 cups (475 mL] 2’ 2 cups [ 600 mL)

(300-350 ml] No phosphate -Follow package recommendattons -

Liquid Detergents ‘4 to 1 cup (60 to 250 mL), depending on the brand and amount of SOII. Follow package recommendations

* These recommendations do not apply... l In areas where phosphates are banned. l In areas with laws limiting (by weight or percentage) the amount

of detergent used in a wash load

Page 7: whirlpool Use& Care Guide and... · To remove it for cleaning, press the release and pull straight out. lnstruc- tions for cleaning are printed on the bottom of the filter . Using

For a Pre Wash

l Push the Cgcle C Ir +r ;N * n,jD Ip and turn It to the 12~rn~r~.t- --lzrk ‘r: the SOAd CYCLE 0 Pull ti?e Cor,*rol K :!; ._,t t star? the washer l The washer WII’ ~II’ Jgl;a:e for two minutes. soali fore gh+ Tlnutes, agliate for two more and the-, drain and spin [See DAK CYCLE Ies~:r~~+1zr, on page

81 l After filling, the washer may pause before starting to agitate.

For Rinsing Only I3oCs wltbm *,xels diapers, peons

or heovliy s&e3 lte7 s if:!?r rmeed extra ‘detergent Extra ae+er3erl: c on require an extra rinse

Jour washer Jr8 t- ‘2 set to rinse only Use the setting f:)r 1’ extra rinse or for !aundry tQot ODi, ree,Yi :I rinse and spin

For “ligbl ogltotlon 2nd sps’ speeds, use toe asterisk ir rhie REGULAR HEAVY Cycle Tne K?l r GENTLE Cdcle has IO‘N agltatlor and spin speeds

I The dasher fills wltri cold water IWater level and temperature zan + me odjustec In this setting

I

For Spinning Only There rmoy be times wher, you

warIt to dralr aut all the wash swater and start oder To s!op the wosher at any time just pus> in on the Cycle Control Knob

To set +he +Josher so It drains or-d spins dater OUT of the load, push In or the Control Knob, turn the dial tr, the right clockwIse) so the pointer IS +ouch iqg The bar just before OFF in any c\/cie

The washer will drain, splr ou’ ,A,a?er and stop

There 1s on clsterlsc )ust afrer the numbers In two c /cIt?s if you push or’ on the Cycle Contr:;l Kr#o~ -urn tbe pointer to one of those asterisks and pd11 the Control Knob out ii-e sdasher VIII fill. agitate. drain c~r~rj SCII-,

Page 8: whirlpool Use& Care Guide and... · To remove it for cleaning, press the release and pull straight out. lnstruc- tions for cleaning are printed on the bottom of the filter . Using

Cycle Operation ‘he numbers in each cycle are fsr ?he riumber of minutes you want the

WHAT HAPPENS IN EACH CYCLE:

. SET WATER TEMPERATURE

. PUSH IN KNOB, TURN TO CYCLE AND TIME

l PULL OUT TO START

KNIT GENTLE CYCLE Use for delicate items and washable synthetic knits such as polyester, nylon, acrylic Wash nylon hose or panty hose In a net laundry bag.

. SET WATER TEMPERATURE l PUSH IN KNOB, TURN TO

CYCLE AND TIME l PULL OUT TO START

. SET WATER TEMPERATURE

. PUSH IN KNOB, TURN TO CYCLE AND TIME

l PULL OUT TO START

REGULAR HEAVY CYCLE Use for sturdy white and colorfast cot- tons, and for heavy work clothes High agitation and spin speeds help get the best cleaning results.

SOAK CYCLE This cycie IS not for washing, it soaks, agitates, spins out the water and stops [no rinse) Use it for stained, yellowed, grey or heavily soiled laundry with a detergent or Dre-soak product Chlorine bleach, If wanted. shculd be added -9 tbie cycle you use after the SOAK Cycle is over

Page 9: whirlpool Use& Care Guide and... · To remove it for cleaning, press the release and pull straight out. lnstruc- tions for cleaning are printed on the bottom of the filter . Using

TEMPERATURE SELECTOR. Rinse water IS RINSES. Cold water is sprayed on the cold In all settings You con also work spinning load to help rinse and remove the Cycle Control Knob to use less water detergent residue when washing small loads. (See page

5.1

If you turn to a cycie ond stoft the washer but change your mm? push in

NOTE: You may notice that some on the Cycie Control Knob an3 turn JO

of the “SPIN” cycles hove SPRAY the right [dockwise) to the setting you wanr Jhen GUI/ out to storf

Page 10: whirlpool Use& Care Guide and... · To remove it for cleaning, press the release and pull straight out. lnstruc- tions for cleaning are printed on the bottom of the filter . Using

I I I’ If You Need Service or Help, We suggest You Follow These Three Steps: 1. Before calling for service

Problems are sometrmes caused by little ihrngs you can correct without lools. Check this list before you call for servrce

IF YOUR WASHER DOES NOT FILL:

l Is the power supply cord plugged in’

l Are both water faucets open7

l Is u fuse blown or crrcuit-breaker tripped? l Are the water supply hoses kinked? l Is the Cycle Control Knob set and pulled out?

IF YOUR WASHER DOES NOT SPIN: l Is the lid closed7 l Is the power supply cord plugged in? l Is a fuse blown or circuit-breaker tripped?

IF WASHER FILLS AND DRAINS WITHOUT RUNNING: l Make sure that the Cycle Control Knob is pornting to a number tn the cycle

MAKE SURE THE DRAIN HOSE IS HIGHER THAN THE WATER LEVEL IN THE WASHER. IF IT ISN’T... l The washer may seem to be draining during wash and rinse cycles. l Water can siphon out. [See Installation Instructions ]

IO

Page 11: whirlpool Use& Care Guide and... · To remove it for cleaning, press the release and pull straight out. lnstruc- tions for cleaning are printed on the bottom of the filter . Using

2. If you need service. :

If your WHIRLPOOL’ appliance ever needs service anywhere in the United States, help IS just a phone call away. to your nearest Whirlpool franchised TECH-CARE ’ servrce representative

Whrrlpool maintains a nationwide network of franchised TECH-CARE ser- vice companies to fulfill your warranty and provide after-warranty service and maintenance to keep your WHIRLPOOL appliance rn peak conditron.

You’ll find your nearest TECH-CARE service company lrsted in your local telephone book Yellow Pages under APPLIANCES - HOUSEHOLD - MAJOR SERVICE & REPAIR Should you not find a listing, dial free, the Whirlpool COOL-LINE ’ service assistance tele- phone number. When calling from:

Michigan (800) 632-2243 Alaska & Hawaii (800) 253-l 121 All other states (800) 253-1301

If you move...To make sure that your appliance is correctly installed and to insure rts continued satisfactory operation, please telephone your nearest TECH-CARE ’ service company for tnstallation or to get the name of a qualified installer. (Installation cost will, of course, be paid by you.)

Helpful hints...You can help your TECH-CARE service representative grve you faster service if you Include the model and serial number of your appliance when requesting service. Also, retain your sales slip and warranty to verify your warranty status. Remember...Your TECH-CARE service representative IS specially trained in the expert repairing and servicing of your WHIRLPOOL appliances He can help you maintain the quality orrgrnally built into your WHIRLPOOL appliance. So why not take the time, now, to look up his telephone number and tot it down in the space provided on the cover.

3. If you have a problem’ : Call Whrrlpool Corporatron in Benton

Harbor at the COOL-LINE service assistance telephone number (see Step 2) or write

Mr Guy Turner, Vice President Whirlpool Corporation Administrative Center 2000 U S. 33 North Benton Harbor, Michigan 49022

If you must call or write, please provide your name, address, telephone number, type of appliance, brand, model, serial number, date of purchase, the dealer’s name, and a complete description of the problem. Thus information is needed in order to better respond to your request for assistance

Page 12: whirlpool Use& Care Guide and... · To remove it for cleaning, press the release and pull straight out. lnstruc- tions for cleaning are printed on the bottom of the filter . Using

Benlon Harbor. Michigan Aulomallc Washers, Clolhes Dryers & Freezers Relrlgeralor-Fleezers. Ice Makers Dishwashers,

vens and Surlace Units. Ranges. Microwave Ovens. Compactors Room Air Conditlaners. Dehumldiliers. Central Hcallng and Air Condillonmg Syslems

Quality Our way of life