Wheel Thrown Series 1.Students will be required to complete a series of

four identical wheel bowls. The minimum height and diameter is four inches. The maximum wall thickness is three-eighths of an inch. Work that does not meet the minimum requirements will receive and overall sixty percent.

2.Students will be require to create bowls that have a repetitive decoration on the rim. This decoration maybe either on the inside or outside of the rim.

3.Students will be required to create perfectly symmetrical bowls. Bowls that do not meet this requirement will not be accepted for grading.

4.Students will be required to foot all four bowls. Ware that is not footed will not be accepted.

Glazed ware

Evaluation for Wheel Thrown

1.Wall thickness around 3/8 inch thickness100

2. Design, composition and glazing100 3.Footing100 4. Symmetrical form100 Total 400

Rubric 100-93 Excellent Students who achieve at the highest

level for this grading criteria and who demonstrate an extra creative effort may receive this score for their work

92-86 Above average Students who are proficient for this grading criteria and who demonstrate active class involvement may receive this score for their work.

85-78 Average Student who have a basic grasp of this grading criteria and demonstrates active class involvement and/or limited application of the concept may receive this score for their work.

77-70 Below average Students are at below basic proficiency for this grading criteria and demonstrates limited class involvement and limited application of the concept may receive this score for their work.

69-0 Failure Students who submit work that is unacceptable for this criteria and who demonstrates limited class involvement may receive this score for their work.