wheel locks lug nuts valves accessories - tcag.com.au doctor 2017.pdf · with over thousands of...
TRANSCRIPT
ACORNTYPE ACORN BULGE OPEN-END
Application
SPLINE
Quality Products - The Wheel Doctor range carries the most comprehensive line of wheel accessories. To guarantee high product quality and dependability, we source and procure only from ISO and QS approved vendors. Our products are manufactured in state-of-the-art facilities and laboratories to meet and exceed aftermarket standards.
With over thousands of applications and growing, our commitment toproduct excellence drives us to look for advanced methods and technologiesto ensure that our customers stay ahead of the curve. We are keen on theinput from our customers as well as new developments in the aftermarketindustry to make sure that we are carrying products that are innovative andin-demand.
TIPS FOR CORRECT WHEEL NUT IDENTIFICATION
Supplying your customer with the correct wheel nuts involves more than ensuring you have the correct thread pitch to suit their application.
Most factory steel wheels and many factory or aftermarket alloy wheels use a one piece taper-seat nut, similar to our 86-14**(non locking) and 86-40*** (locking) styles.
Older alloy wheels use a nut profile where the shaft goes through a corresponding hole in the wheel and a loose washer supports the nut against the face of the wheel. These are similar to our 86-17** (non locking) and 86 42*** (locking) styles.
Care should also be taken to ensure the nut has sufficient length to fully engage against the face of the wheel, before it “bottoms out” on the stud. This is a safety issue and should be checked with care. Customers should be aware not to over-tighten nuts, particularly lock nuts, and only tighten to torque specification on the product packaging. Over-tightening can damage vehicle studs and make nut removal difficult, and possibly damage nuts. Damage caused by over-tightening is not covered by product warranty.
Special application nuts are available, including long stud lock nuts (our 86-48*** open-ended lock nuts), small outside diameter nuts with internal Allen Key (86-28** style) or torx security fitment (86-45*** style), for alloy wheels with small diameter nut recess holes.
**indicates part number in following catalogue.
WHEEL LOCKSAcorn
Mag XL Mag
Thread size
7/161/2
12mm x 1.2512mm x 1.5014mm x 1.50
Part Number
86 4020086 4040086 4060086 4070086 240905
4-PACK
12mm x 1.2512mm x 1.50
86 4060586 40705
5-PACK
Thread size
7/161/2
12mm x 1.2512mm x 1.50
Part Number
86 4220086 4240086 4260086 42700
4-PACK
12mm x 1.2512mm x 1.50
86 4260586 42705
5-PACK
Thread size
7/161/2
12mm x 1.2512mm x 1.50
Part Number
86 4620086 4640086 4660086 46700
4-PACK
Thread size
7/161/2
12mm x 1.2512mm x 1.50
Mag Socket Lock
Part Number
86 5220086 5240086 5260086 52700
31.5mm 16.5mm
17.3mm
36.3mm
60°
26.4mm
Wheel Doctor Application GuideFind out what size lug and lock nuts fit on any car with the newest user friendly application guide which features up-to-date information for cars of all makes and models. In this user-friendly guide, all you have to do is locate your vehicle by make and model, then find the year and corresponding thread size.Made with laminated pages and a durable plastic spiral spline, this compact and sturdy design makes ours the ultimate guide to have at your finger tips for quick reference.
TUNERSTANDARD MAG
38.1mm 16.5mm
17.3mm
26.2mm
53.8mm
33mm
17.3mm
24.9mm
Ph: 02 8853 2900 [email protected]
163162
LUG NUTSOne-Piece Acorn
Thread size
7/161/2
12mm x 1.2512mm x 1.5014mm x 1.50
1/2 Long
Bulk Number
86 1002.5086 1004.5086 1006.5086 1007.5086 1009.5086 1004L.50
Part Number
86 144086 144186 144486 144586 1449
One-Piece Standard Mag
Thread size
7/161/2
12mm x 1.2512mm x 1.50
Bulk Number
86 1740.5086 1741.5086 1744.5086 1745.50
Part Number
86 174086 174186 174486 1745
Blue Anodised Acorn
Thread size
7/161/2
12mm x 1.2512mm x 1.50
Part Number
86 1702B 86 1704B86 1706B86 1707B
Red Anodised Acorn
Thread size
7/161/2
12mm x 1.2512mm x 1.50
Part Number
86 1702R 86 1704R86 1706R86 1707R
XL Mag
Thread size
7/161/2
12mm x 1.2512mm x 1.50
Part Number
86 8852 86 885486 885686 8857
Bulge Acorn
Thread size
7/161/2
12mm x 1.2512mm x 1.50
Bulk Number
86 1902.50 86 1904.5086 1906.5086 1907.50
Black Acorn
Thread size
7/161/2
12mm x 1.2512mm x 1.50
Part Number
86 120286 120486 120686 1207
Part Number
86 820286 820486 820686 8207
Thread size
7/161/2
12mm x 1.2512mm x 1.50
Black Mag
60°
20.6mm Hex
35.5mm
60°
19mm Hex
35mm
60°
20.6mm Hex
35.5mm
60°
20.6mm Hex
35.5mm
60°
20.6mm Hex
35.5mm
20.6mm Hex
41.1mm
19mm
17.3mm
20.6mm Hex
41.1mm
19mm
17.3mm
20.6mm
57.4mm 30mm
17.3mm
Socket Lock
Thread size
7/161/2
12mm x 1.2512mm x 1.5014mm x 1.50
Key
Part Number
86 4520086 4540086 4560086 45700
Chrome Plated Lock
Part Number86 41808
Thread size12mm x 1.50
Ball
Open Ended Acorn Headless Lock Style
Thread size
7/161/2
12mm x 1.2512mm x 1.5014mm x 1.50
Part Number
86 4820086 4840086 4860086 4870086 48900
Bulk Number
86 45200.5086 45400.5086 45600.5086 45700.5086 45900.50
86 45000
60°
21.8mm
Acorn Socket Lock
Thread size
7/161/2
12mm x 1.2512mm x 1.50
Part Number
86 5020086 5040086 5060086 50700
60°
35.5mm
WHEEL LOCKS
60°
32mm
19mm
27.9mm 56.4mm
Ph: 02 8853 2900 [email protected]
165164
LUG NUTSOpen End Bulge Acorn
OEM Replacement Style
Thread size
7/161/2
12mm x 1.2512mm x 1.5014mm x 1.50
Part Number
86 1502186 1504186 1506186 1507186 15091
Deep Seat Spline Acorn 20mm Thin Lug Nut
Thread size
7/161/2
12mm x 1.2512mm x 1.50
Key
Bulk Number
86 3802.5086 3804.5086 3806.5086 3807.50
86 3800
NB: Key sold separately
Chrome Plated Lug Nuts
Thread size
12mm x 1.50 Conical
12mm x 1.50 Ball
Part Number
86 1807
86 1808
Part Number
86 113024 86 11304486 11306486 113074
Thread size
7/161/2
12mm x 1.2512mm x 1.50
Open End Acorn OEM Replacement Style
Thread size
7/161/2
12mm x 1.2512mm x 1.5014mm x 1.50TUNER KEY
Part Number
86 280286 280486 280686 2807
KEY INCL.IN BLISTER
Socket Acorn - 19mm
Bulk Number
86 2802.5086 2804.5086 2806.5086 2807.5086 2809.50
86 2800
Part Number
86 380286 380486 380686 380786 3800
90mm
20.3
19mm20.6mm
34.8mm
20.3mm
60°
60°
19mm Hex
14mm
60°
19mm Hex
21mm
60°
32mm
19mm
17mm19mm
86577High Pressure
100 PSI0.453 x 1.73”
Medium
Bolt On Valves Valve Caps
Black Cap86 508BK
Tyre Pressure Indicator Chrome Cap
Chrome Cap with easy to read tyre pressure indicator.
Replaces standard caps. Check tyre pressure at a glance.
Colour changes when under pressure.
86 TP32M 32 PSI Set of 4
ACCESSORIES
Dual Hex Socket Key3/4” & 13/16”
Lock Nut Key
86 LNKReplacement Key
Thread Gauge Checker
86 TG6000Check Thread size
8 sizesMulti-coloured
Ideal for problem fits. Creates a “steel” recessed style seat to many applications
where fitment is difficult or damaged.
86 W1620
Wheel Centre Inserts
Washers
Bulk Number:
86 772.2000
Wheel Spacers
86 6025 Lug,
114.3 - 127mm B.CThickness - 8mm
86 6035 & 6 Lug,
139.7mm B.CThickness - 6.35mm
90.17mm
163.3mm
109.5mm
174.5mm
17.8mm”
27.9mm56.4mm
Ph: 02 8853 2900 [email protected]
167166
DISPLAY AND POINT OF SALE
Up to date application guide and bracket to assist in identifying stud and nut size.
Full coverage of popular wheel nuts and locks. Compact and attractive display for any store.
Ph: 02 8853 2900 [email protected]
189188