wg43 indesit

7/28/2019 WG43 indesit

1/39

Model type:

WG43TXGI

Commercial code:

12839 18025


2/39

mod.WG43TXGI page 2

General notes

Technical Documentation guidelines

----------------------------------------------------------------------------------------------------------------------------------

-------------------------------------------------------------

You can find herewith some generic information to simplify cunsulting of technical documentation:

1. Models of same range share the same exploded views, which report the richest set of spare parts:generally, a model does not

necessarly have a related spare part for each particular shown on exploded views.

2. Some spare parts can not be represented directly on the exploded views (instruction booklets, specific kit, etc...). You can find

those codes in the spare parts list with the same reference of particular where spares are installed or with references 099, 999.

Instruction booklets, once managed, appear with 000 reference.

3. On the higher right site of each exploded view there is a serial number which indicates the beginning of the production of

certain range:some models might have more than an exploded view for a given category, each distinguished by a different serial

no.and linked to another spare parts list, In this case, serial no. is required to supply the right spare part code. Exploded view to be

considered is the one with a more recent serial no. but previous than the one of the model that needs assistance.

4.Exploded views might require further updates even after publishing. Addition of new spares will go on following the already

existing numeration references. Revision number of an exploded view is shown into last four digits of serial number into upper

right hand corner.

5.The spare parts list associated to an exploded view shows related codes of spares managed for a certain model; for each spare

part other informations are available:

REF: reference no of spare into a table; SUBSTITUTE: list of spare(s) which can replace a code but that keeps same functional

characteristics

INDUSTRIAL CODE: list of variables of a model (shown into model label) where such spare is used; NOTICE: code of

information(s) to refer to complete technical intervention, track for changes or to find correct spare part code.

6. Some notices, into a same section are generic therefore cannot be directly linked to a spare part. In order to assist a model in

the best way as possible, it is helpful to pay attention to all notices and constantly verify documentation updates

7.Technical documentation cover shows model name and its commercial codes


3/39

mod.WG43TXGI page 3

1110010 Exploded views


4/39

mod.WG43TXGI page 4

1110010 Spare parts list

Ref. Code . Substitute Description Notice Industrial

000 C00046972 m8x18


5/39

mod.WG43TXGI page 5

1110150 Exploded views


6/39

mod.WG43TXGI page 6



000 C00047551 user istructions booklet it

001 C00046947 1 x C00066277 27 giugiaro

001 C00066277 . 27 giugiaro

002 C00044900 ,

003 C00047565 control panel + handle giugiaro n1040013

005 C00046945 b.27 giugiaro

006 C00046946 . 27 giugiaro 0111098

006 C00055474 / 0111098

008 C00046944 1 x C00044735 push button knob white giugiaro

011 C00046923 1 x C00048002 cabinet white 27 giugiaro 0111131

n1040058

011 C00053781 1 x C00064546 cabinet white 27 kit n1040058

1 x C00065832

011 C00066276 27 2 n1040200

011 C00083796 . n1040200

013 C00037225

013 C00046953 1 x C00058449 inner door frame 0111125

013 C00057570 . giugiaro 0111131

013 C00058690

014 C00045244 giugiaro



017 C00046955 . giugiaro

018 C00046954 1 x C00058449 outer door frame 0111125

018 C00057569 . 27 0111131

019 C00047092 27 giugiaro

020 C00046951 .

029 C00047088 1 x C00046121 foot

1 x C00050320

032 C00043636 0111125

032 C00057567 . 0111125

033 C00046949

036 C00044085

038 C00046924 27

045 C00050182 . wgs / wg 0111131


7/39

mod.WG43TXGI page 7



046 C00058692 . giugiaro

048 C00057571

049 C00058702

051 C00058689 . 27

099 C00040932 m6

099 C00044115 l = 34 mm

099 C00044116 bolt m8 x 55

099 C00076402 panel paraspray


8/39

mod.WG43TXGI page 8

1110210b Exploded views


9/39

mod.WG43TXGI page 9

1110210b Spare parts list


001 C00034335 n1040259

002 C00034337 10,5 x 21 n1040259

003 C00034336 d33xd9xsp2 n1040235

004 C00040902 3l 496 0111086

0111093

004 C00047118 3lx tem 1196 0111093

004 C00053714 l 1110 j4 / 1106 0111093

005 C00053721 0111093

005 C00104529 0111093

006 C00047110 1 x C00058523 . 2 f.th 1

1 x C00103440

007 C00040130 : ++

008 C00041548 1 x C00143826 400-500

009 C00103637 d=

010 C00036059 400-600-800-1000 obg

011 C00104428 1 x C00014855 m8x80

012 C00104364

013 C00047136 1 x C00144571 romob m8

014 C00037346

015 C00046943 "wg834txi"

016 C00047133 . . 0111097

017 C00047087

018 C00039303 bolt l=55

020 C00046957 .

021 C00047099 obg 0111074

022 C00032708 plastic insert nut - case front

022 C00046961

023 C00103656 . .

024 C00040621 m4 x 50

024 C00104367 obg

025 C00046942


028 C00034314 1 x C00104597

029 C00034315 1 x C00040888 saddle - damper spring clamp

030 C00039308 bolt l=50


10/39

mod.WG43TXGI page 10

1110210b Spare parts list


031 C00034316 1 x C00029588

032 C00104488 self locking nut m8

034 C00040901

035 C00047119 400g.(20406)h=56 mm

036 C00103642 l5

037 C00020181

037 C00103677

038 C00046972 m8x18

039 C00041843 8,5x17x1,5

041 C00040888 - ,

042 C00055397


11/39


1110310a Exploded views


12/39


1110310a Spare parts list


001 C00019740 14mf 8 micron n1040058

n1040073

001 C00074642 + 14 mf

002 C00047115 1 x C00026359 radio interference suppressor n1040058

002 C00065987

003 C00003103 1 x C00022357 supply cable n1040058

003 C00064563 3x1 schuko 1,5 m

004 C00047111 1 x C00049312 wiring + timer elbi 5000 0678 n1040073

004 C00074678 wiring + timer elbi 5000 0678.a

005 C00030358 .-. -

005 C00031061 nc

006 C00019749

008 C00041163 terminal block

009 C00047114 elbi 5000 0678-0003 0111060

009 C00049196 elbi 5000 0678(60411 0111060

n1040073

009 C00065975 elbi 0748/1.a/2.a n1040178

010 C00019650

010 C00047062 0111098

011 C00047109 1 x C00052621 1 210 / 95 0111060

011 C00048195 1-. 0111060

012 C00047066

013 C00047069 1 x C00097834

014 C00047068 1 x C00075352 detergent drawer

015 C00034325 1 x C00103834 pressure switch hose l 560 mm

017 C00011140

019 C00103883 1-. 117

020 C00046976 2000 230

021 C00040931

023 C00047117 1 x C00053714 motor 2/12 poles 0111093

1 x C00053721

1 x C00054724

023 C00054724 2/12 . 0111093

024 C00104675

025 C00047173 seal m5


13/39


1110310a Spare parts list


025 C00047174 m 5

027 C00034332 bracket - heater element/tub

029 C00027466 .

030 C00026616 1 x C00015498 hose - valve/dispenser (hot)

031 C00019902 . .

032 C00003070 . 1500 mm

034 C00005572

036 C00028568

037 C00019708

038 C00028569

039 C00047067

040 C00019732 hc

041 C00047065 1 x C00052771 hopper

042 C00046980 8lt/1 220

052 C00044998 . . 240

053 C00050197


14/39


Notices

0111060: MODIFIED ELBI 5000 0678 TIMER

-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

As from serial no. 60411.0001, ELBI 5000 0678 timer and relevant wiring have been modified and pressure switch code 047109

without overflow (excepting in the case of model WG625SK) is used on 400 and600 rpm washers in the Giugiaro range.

Modified timer code 049196 refers to drawing number 160004008.07

printed on the data plate on the timer.

The new timer may be used to replace the premodification timer (drawing number 160004008.03 printed on the data plate on the

timer)

only if mounted with the modified wiring and pressure switch code

047109 (excepting in the case of model WG625SK).

Timer code 047114 and pressure switch 048195 will be supplied normally.

0111074: MODIFIED GIUGIARO DOOR SEAL

-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

Beginning with serial no. 61212.0001, a new seal will be used with a thicker front lip, on all of the round glass doors on the

Giugiaro washing machines produced at the Teverola factory, in order to increase adherence between the seal and the door, to

eliminate any water leaks.

The new seal will have the same code no. 047099, as the pre- modification component.

0111086:

-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

In order to eliminate the noise made by the slipping of the belt on the pulleys on the 400 r.p.m. washing machines with the

standard cabinet, the belt must be replaced, using the one with code number 040902.

0111093: MODIFIED MOTOR, PULLEY AND BELT

-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------


15/39


Beginning with serial no. 70908.0001 on the 400/500/600 rpm washing machines produced at the Teverola plant (except model

WG620G from serial no. 70901.0001), the motors, drive pulleys and belts have been changed.

The new parts are:

400/500 rpm Models:

Cod. 054724 - Motor: 2/12 poles;

Cod. 053721 - Driven pulley;

Cod. 053714 - Belt: CINGHIA L 1110 J4

600 rpm Models:

Cod. 054723 - Motor: 2/16 poles;Cod. 053721 - Driven pulley;


WG620G

Cod. 056521 - Motor: 2/16 poles;

Cod. 053721 - Driven pulley;


The modified parts are interchangeable with the pre-modification ones, only if used as a complete assembly; the pre-modification

parts will continue to be handled normally.

0111097: CODIFICATION OF CROSS-SUPPORT FOR CABINET

-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

There have been requests for the following part, which was not previously supplied, but which is now coded.

The new code is as follows:

Code 055397 - support cabinet

This part is now available from our Centralised Spare Parts

Warehouse.

0111098: UNIFICATION OF THERMOSTAT AND POTENTIOMETER

-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

Beginning with serial no. 71110.0001 for the washing machines produced in the Teverola factory, the parts already in use at the

Comunanza factory will be used, (where appropriate) in order to unify the component parts utilised in production.

The parts concerned are as follows:

.ps

Part no. 019650 - Adjustable Thermostat;

Part no. 046981 - Spin Potentiometer;

Part no. 014917 - Thermostat Seal;

The use of these parts necessitated the modification of the knobs and in some cases the control panels.

The new knobs are not interchangeable with the previous ones therefore, they have been given new part numbers.

The new control panels + handles however, can be used on the pre-modification appliances (without having to change the knobs).

The only exceptions are the following models:

WG835TXR, WG834TXI, WG838TXE and WN880XWE/S, where the new control panels had to be re-coded and the new

potentiometer used with the relative knob.

The part numbers for the new control panels are:

Part no. 055584 - Control panel + handle WN880XWE/S;

Part no. 055577 - Control panel + handle WG835TXR;

Part no. 055581 - Control panel + handle WG834TXI;Part no. 055583 - Control panel + handle WG838TXE.


16/39


0111125: DOOR HINGE MADE OF METAL SHEET

-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

Beginning with serial no. 80703.0001 on models that use the door with part no. 001459, a steel hinge with part no. 057567, a new

door with part no. 057573 and screws to fasten it (part no. 057568) have replaced the previous pieces.The new hinge can be used on pre-modification appliances only if they use the new door and screws.

The new door can be fitted onto the earlier aluminium hinge, part no 043636, but only if the screws used to fasten it have part no.

057571.

0111131:

-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

Beginning with serial no. 81020.0001 on some of the washing machine models produced in the Teverola factory, the door with

the center handle is being used(in line with the hinge).

This modification affects the following parts:

Part no. 051926 - Giugiaro cabinet;

Part no. 058692 - Door handle kit with Giugiaro restyling;

Part no. 058702 - Complete Giugiaro door;

Part no. 058689 - Giugiaro door frame;

Part no. 058690 - Inner frame.

Said modification also entails a change in the commercial codes, as indicated below:

Serial no. 81020.00001 Mod. W415TPDI - Com. code changes from 16938 to 18032;

Serial no. 81020.00001 Mod. W535TPI - Com. code changes

from 16942 to 18036;Serial no. 81021.00001 Mod. WG430TXEI - Com. code changes from 12837 to 18023;

Serial no. 81022.00001 Mod. WG630TXI - Com. code changes from 08442 to 18018;

Serial no. 81022.00001 Mod. WG425PI - Com. code changes from 16939 to 18033;

Serial no. 81022.00001 Mod. WG437TPEI - Com. code changes from 16940 to 18034;

Serial no. 81023.00001 Mod. WG43TXGI - Com. code changes from 12839 to 18025;

Serial no. 81023.00001 Mod. W44TXDI - Com. code changes from 13738 to 18027;

Serial no. 81023.00001 Mod. WG636TPI - Com. code changes from 16869 to 18030;

Serial no. 81023.00001 Mod. WG635TXEI - Com. code changes from 12838 to 18024;

Serial no. 81024.00001 Mod. W44TXDI - Com. code changes from 13738 to 18027.

n1040013: New Indesit logo

-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

Beginning with serial no. 90301.0001, a new logo (as shown in the figure) will be printed or silk-screened on the control panels

and the manuals for the Indesit washing machines and washer-dryers.

The new parts will be handled with the same SAT numbers as the pre-modification parts (which will be eliminated).


17/39


n1040058: Various modifications (Plastic tub without safety thermostat hole, new supply cable and radio

interference suppresser complete with terminal board).

-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

Beginning with serial no. 00110.0001, a few modifications have been made to washing machines manufactured at the Teverola

factory. These modifications mainly affected the cabinet (on which the perforation of the terminal board was modified) and the

tub (from which the hole and the safety thermostat were removed) and a new heating element with fuse was used.

The new parts, except for the worktop, cannot be used on their own on pre-modification appliances because the cabinet has to

have the supply cable moulded together as well as the radio interference suppresser and the quick connection condenser, whereas

for the tub it is absolutely necessary to use the heating element with fuse.

However, to carry out this intervention, the wiring needs to be modified in the following way:

1) Discard the wire leading from the safety thermostat to the heating element.2) Disconnect the wire that leads from the wiring to the safety thermostat and insert it onto the contact of the new heating element

on which the fuse is placed (it can be recognised by the green insulating sheath on 230 V models and the blue one on 240 Volt

models).

The pre-modification parts shall continue to be handled until stocks run out.

The following table has been attached in order to make it simpler to identify the parts necessary for the use of a new cabinet or of

a new tub on pre-modification appliances.


18/39



19/39


n1040073: ELBI Standardised Timer on 400-600 rpm appliances from Teverola

-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

Beginning with serial no. 00420.0001, the new ELBI standardised timers have been used on 400-600 rpm Washing machines

manufactured at the Teverola factory (both with plastic and stainless steel tub), (00714.0001 - WG522TXU- 46180660100) , with

the exception of models from the LB2000 range which were manufactured using the new timer from the very beginning.

In connection with the use of this new timer, condensers complete with fixing brackets have been used and a hole was pierced

into the cabinets for the hardware key as well as suitable cutting for the condenser fixing bracket housing.

The part nos. for the parts used for the modification, excluding the wiring assemblies (they appear in the documentation of the

respective models) are the following:

ELBI standardised timers:

Part no. 065975 - ELBI Timer 0748 fonly for Service.

The timer SAT must be used in place of the following timers, making sure that

during the connection the wiring harness connectors are not rotated at 180 degrees.The connectors must be inserted in respect to their correspondence to the letters noted on the lower right side of the timer, without

respecting the terminals.


20/39


ELBI 0748/1.A (yellow plate) ;

ELBI 0748/2.A (blue plate);

ELBI 5000 0678.A Standardised (white plate);

ELBI 5000 0698.A Standardised (red plate);

ELBI 5000 0698/3.A Standardised (white plate with red band).

Condensers:

Part no. 074642 - Condenser + bracket 14 mF;Part no. 074643 - Condenser + bracket 16 mF;

Part no. 074644 - Condenser + bracket 12,5 mF.

Pressure switches

Cabinets:

Part no. 066276 - White cabinet 27 two holes electrovalve for ranges A-AF-BAMR-HL-IW-LRE-W-WG-WH-WN-;

Part no. 066507 - Brezil cabinet for range AF;

Part no. 066275 - White cabinet 27 for range WGS.

Part no. 064899 Serial port test plug for cabinet.

The timer 065975, if used instead of the pre-modification one requires without exception the replacement of the wiring assembly,

therefore the pre-modification timers (part no. 049196, part no. 049378 and part no. 053719) will continue to be handled normally.

The new condensers are not interchangeable with the pre-modification ones (part no. 019740, part no. 013582 and part no.

036121), therefore both those with and those without fixing bracket are handled.

The modified cabinets will keep the same part number as the pre-modification ones.

All the wiring assemblies will only be handled upon request and therefore warehouse stocks are not planned.

n1040178: Timer ELBI 0748 green label specifically for the SAT.

-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

The timer code 065975 that is forwarded as a spare part, is used exclusively for After Sales Service.

This particular item is handled in place of the five timers used in production, and differs not only aesthetically but also in function

as it combines all the operations.

Please be aware of the following, in the employment of the timer Code 065975 - Timer Elbi 0748 Green Label for SAT :

1) Do not rotate the wiring harness connectors at 180 during the connection;

2) The connectors must be inserted in respect to their correspondence to the letters noted on the lower right side of the timer,without respecting the terminals.

3) The SAT timer is mounted without any modification performed on apparatus that employ a timer without a distribution lever.

Rationalized Elbi Timers.

The SAT timer, is used in place of the following timers:

ELBI 0748/1.A (yellow label) the distribution lever is not employed;

ELBI 0748/2.A (blue label) the distribution lever is not employed;

ELBI 5000 0678.A Rationalized (white label);

ELBI 5000 0698.A Rationalized (red label);

ELBI 5000 0698/3.A Rationalized (white label with red band).


21/39


n1040200: Electrovalve drill hole plug for Teverola production cabinets.

-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

From the registration no. 10601.0001 on all Washing machines produced in the Teverola plant have been using cabinets with two

electrovalve drill holes.If the model produced provides for one only electrovalve, then one drill hole is capped by using the appropriate plug code

083796.

The cabinets handled by After Sales Service with two electrovalve drill holes where used on models with one only electrovalve

should use the plug.

n1040235: Restored the fixing of the anterior counterweight with platelets inserted in the tub-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

From the 11105.0001 registration number on the washing machines with plastic tubs produced in the Teverola factory, the fixing

of the anterior counterweight is restored with platelets inserted in the tub instead of those realised with self-threading screws, the

system described in Notice N1040184.

The tubs maintain the same SAT code and are provided with the following particulars:

N 3 Screws code cod. 014342;

N 3 Conical washer cod. 055018;

N 3 Plain washer cod. 034336.

Whenever the necessity may arise on a tub, proceed with diverting the self-threading screws that block the anteriorcounterweight., as it's compulsory to execute the fixing again avoiding in time a possible loosening and thus the breaking of the

tub by utilising the registered screws (cod. 014342), the conical washers (cod. 055018), the plain washers (cod. 034336) and the

platelets (cod. 055038).


22/39


Electric schemes and links

Cod. 111167a


23/39


Legend

Legend: 111167a

AQS Aquastop electrovalve Mzbn/MTA zbn timer motor

B Buzzer N Neutral or Terminal Board

BC Blocco Cesto NC Spin cycle exclusion

BF Terminal board contact, motor fan and dryer P Pressure switch

BP Buzzer P1 1st level pressure cut-off switch

C Condensator P2 2nd level pressure cut-off switch

CA Condensator PA High speed potentiometer

DV Switching device PB Low speed potentiometer

EF/CL Electro-Valve Cold Water / Bleach PL Pure Wool

EF/L Electro-Valve Cold Water / Wash PM Motor Thermoprotector

EF/P Electro-Valve Cold Water / Prewash PR Timer programmer or Pressure switch

ER Exclude Heating Element PS Drain pumpET Thermostat disactivation R Heating element

EV Electrovalve RE Relay

EVA Dryer electrovalve RR Heating element

EVC Hot water electrovalve RV Speed regulator

EVF Elettrovalvola acqua fredda Ras/RA Dryer heating element

EVL Wash electrovalve S LED

EVP Pre Wash electrovalve SL Line LED

FA Antijamming filter SO Door LED

FD Delicate drying cycle thermostat SR Heating LED

FE Strong drying cycle thermostat ST Temperature selector FRT Thermofusible Heating Element SV Speed Selector for Spin

I Inverter T Timer contacts

I1..2..3.. Switches/switching devices TA Drying timer contacts

IA Switch On/Off TB Low Temperature Thermostat

IC Switch N.C. - 1/2 Load TC Spider wheel earth

ID Switch display TFL Flange earth

IE Water Saving Device TG Main earth

IF Switch - Spin Reduction TH Thermostat

IP Door switch TH1 1st temperature thermostat

IR Line switch TH2 2nd temperature thermostatIS Water-stop TH3 3rd temperature thermostat


24/39


L Line or Lamp THF Operating thermostat

LB Low Level THR Adjustable thermostat

LN Normal Level TM Motor earth

LS Pilot lamp TMB Main cabinet earth

M Earth-symbol TMP Motor thermal protector

MC Spin cycle motor TMS Thermostop

MI MOTOR WITH PULLEY TP Thermal protector

ML Wash cycle motor TPS Drain pump earth

MO Terminal Board TR Heating element earth

MP Door dip-switch TS Safety thermostat

MR Thermal Lock TT Timer earthing connection

MT Timer motor TTH Earthing Thermostat

MV Motor fan TV Tank earth

MV -Ras Dryer heating element ZBN Timer


25/39



Cod. 111168b


26/39


Legend

Legend: 111168b
































27/39

















28/39



Cod. 111168c


29/39


Legend

Legend: 111168c
































30/39

















31/39



Cod. ce012100


32/39


Legend

Legend: ce012100
































33/39

















34/39



Cod. lg001400


35/39


Legend

Legend: lg001400
































36/39

















37/39



Cod. se045700


38/39


Legend

Legend: se045700
































39/39















wg43 indesit

Documents