westell in-building wireless system...
TRANSCRIPT
WESTELL .COM
High performance passive components for superior system performanceWestell offers an extensive line of in-building passive devices to meet a variety of DAS requirements. These passive components, which include the following products, are available in multiple port configurations, power options and connector types.
• Directional Couplers
• Hybrid Couplers
• Cross Band Couplers (aka Diplexers)
• Terminations
• Filters
• Duplexers
• In-Line Attenuators
• Power Tappers
• Power Dividers
ClearLink® Low PIM Passives At Westell we are dedicated to providing high performance products that meet or exceed the typical PIM measurement to deliver the most superior DAS possible. Available in type N, DIN, or 4.3-10 connectors, our ClearLink PIM rated passives are tested and approved to meet carrier requirements of ≤ -153 dBc, measured with 2 tones @ +43 dBc. This line includes:
• Hybrid Couplers
• Power Dividers
• Directional Couplers
• Power Tappers
Westell In-Building Wireless System Components
Page 1 of 2
Westell’s Dedication to Superior Performance
Short Lead Times Westell’s top selling passive
components are in-stock and available
for immediate shipment.
Continuous Expansion of Product Portfolio Westell is committed to expanding our
offerings to meet evolving industry
requirements. Check out our 30 new
4.3-10 low PIM ClearLink connector
models.
Unparalleled Support Westell takes pride in providing
superior support. In a recent
customer satisfaction survey, 96%
of respondents rated our support as
exceeding or meeting expectations.
If you need help determining the
correct passive component(s) to meet
your specific application requirements,
contact us today.
Copyright © 2015 by Westell, Inc. All Rights Reserved. Westell, ClearLink, Kentrox, and Optima Management System are registered trademarks of Westell, Inc. All other names are trademarks of their respective owners. Information is correct at time of printing and is subject to change without notice. Westell, Inc. is an Equal Opportunity/Affirmative Action employer.
WESTELL .COM
030-200289 rB 09/23/15
Page 2 of 2
Westell In-Building Wireless System Components
ClearLink® System Components
Description Band Connector Type Offerings
Power Offerings(average power)
ClearLink® Power Dividers
2, 3, or 4 way 698-2700 MHz N, DIN, or 4.3-10
50, 300, or 700 Watts
ClearLink® Directional Couplers
5, 6, 10, 15, 20, or 30 standard coupling (dB)
698-2700 MHz N, DIN, or 4.3-10
200 Watts
ClearLink® Hybrid Coupler
Dual directional, 3.1 (dB) ±0.5 698-2700 MHz N, DIN, or 4.3-10
200 Watts
ClearLink® Power Tappers
5, 6, 10, 15, 20, or 30 standard coupling (dB)
698-2700 MHz N, DIN, or 4.3-10
200 Watts
Standard System Components
Description Band Connector Type Offerings
Power Offerings(average power)
Power Dividers 2, 3, or 4 way 700-2700 MHz N 10 Watts
Directional Couplers 6, 10, 15, 20, or 30 standard coupling (dB)
700-2700 MHz N 100 Watts
Terminations 50 Ohms Broadband DC-6 GHz N or DIN 10 Watts
Cross Band Couplers 1700-1900, 698-2300, 800-2300, 800-900, LTE 700 MHz Upper C or Lower AB blocks with Cellular 850,
PCS 1900, and AWS bands
N 10 Watts
In-line Attenuators 3, 5 6 , 10, 15, 20 or 30 dB attenuation
DC-6.0 GHz N 10 Watts
Duplexers 824-849; 869-894 MHz (Cellular 850)
1850-1910; 1930-1990 MHz (PCS 1900)
N 200 Watts
Filters Cellular 850, PCS 1900, Public Safety 800 and Upper 700 C
N 200 Watts
For more detailed information on our system components, please request our product specific datasheets.
Don’t See Something? Let Us Know We understand that the each DAS environment is unique. If there is something you don’t see as part of our standard product offerings, please contact us today.