west 26 2014

“The Nation’s Best Read Construction Newspaper… Founded 1957.”

® WesternEdition

$3.00

AGC Doles Out Awards...8

JCB Backhoe Rodeo

Draws in Guests...54

Inside

By Jeff WinkeSPECIAL TO CEG

Meeker Airport is critical to theresidents and businesses in RioBlanco County. Located inMeeker, Colo., the airport is desig-nated as a C-II general aviation air-port by the FAA, which means theairport can accommodate aircraftwith wingspan of less than 79 ft.(24 m). Private aircraft for energycompanies, including the miningniche, as well as ranchers, fishingand hunting outfitters, are all flownin and out of Meeker Airport and itaccommodates charter service forboth passengers and cargo.Runway 3-21 at the county-

owned Meeker Airport hadreached a point of wear and deteri-oration that required full recon-struction and upgrades to remaincompliant with the FAA’s C-IIrequirements.The project, which was awarded

to Fiore & Sons Inc., Denver,

Colo., was a two-stage project witha contract value of $12.5 million.Construction consisted of the dem-olition of the existing 60-ft. (18 m)wide by 6,500-ft. (1,981 m) longrunway and the construction of anew runway to meet C-II runwaysafety area and longitudinal stan-dards. The new runway waswidened to 100 ft. (30 m) — near-

ly doubling its width — andremained 6,500-ft. (1,981 m) long.The runway ties into the existingapron connector with a teacup styleturnaround on the 21 end of therunway. Fiore & Sons completed the

demotion and removed 43,000 sq.yd. (35,953 sq m) of roto-milledasphalt in preparation for the site

conditioning, grading and pavingcompleted by United Companiesof Mesa County, headquartered inGrand Junction, Colo. UnitedCompanies employs approximate-ly 400 workers. Between the dirtand paving crews, the companyhad approximately 20 workers onthe Meeker Airport site.

Meeker Airport Makes Smooth Landing

More Than 3,400 Attend

Ritchie’s LA Sale...56

December 27, 2014 • Vol. IX • No.26 • 470 Maryland Drive • Ft. Washington, PA 19034 • 215/885-2900 • Toll Free 800-523-2200 • Fax 215/885-2910

www.constructionequipmentguide.com

Construction consisted of the demolition of the existing 60-ft. (18 m) wide by 6,500-ft. (1,981 m) longrunway and the construction of a new runway to meet C-II runway safety area and longitudinal stan-dards.

see AIRPORT page 38

Published Nationally

The U.S. House of Representatives passedlate Wednesday, Dec. 3, and the Senateapproved Dec. 16 the Tax Increase PreventionAct. Among the 50 expired tax breaks the billextends is a reinstatement of the 50 percentdepreciation bonus for 2014 and an increase ofthe Section 179 expensing levels this year to

$500,000 with a $2 million phase-out cap.Both of these tax breaks expired Dec. 31, 2013.At press time, the president was expected tosign the bill. In addition to affecting equipmentpurchases made in 2014 retroactively, this billwould in effect create a window for last-minutepurchases made prior to Dec. 31, 2014, to be

included.Visit www.constructionequipmentguide.com

and AED’s www.http://depreciationbonus.org/for more information.

(This story also can be found on ConstructionEquipment Guide’s Web site at www.construc-tionequipmentguide.com.) CEG

Congress Delivers Early Holiday Tax Present

Two-thirds of the economic ben-efits and jobs created by federalhighway and transit investmentoccur in non-construction sectors,according to a new analysis fromIHS Inc., a leading global source of

critical information and insight.The study also finds that every dol-lar invested through the federalHighway Trust Fund (HTF) in statehighway, bridge and public transitinfrastructure programs returns 74

cents in tax revenue.The report, “Transportation

Infrastructure Investment:Macroeconomic and IndustryContribution of Federal Highwayand Mass Transit Program,”

reveals that 70 percent of the eco-nomic benefits, or value-added, offederal HTF investments in trans-portation improvements occur innon-construction sectors of the

Industry Spending Has Far-Reaching Benefits

see IHS page 52

Table of Contents ................4

Mini & Compact EquipmentSection ..........................16-32

Parts ..................................34

Paving Section..............41-47

Auction Section............51-57

Business Calendar ............52

Advertisers Index ..............58

• December 27, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

ARIZONAGilbert 480.545.2400Phoenix 602.252.7121Prescott 928.778.5621Tucson 800.989.8681Corporate 602.252.7121

CALIFORNIA

Mojave Coming Soon

Pico Rivera 562.699.6767

NEW MEXICO

TEXASEl Paso 915.872.1001

WHENEVER, WHEREVER AND HOWEVER NEEDED

WITH KOMTRAX AND ROAD MACHINERY,THE ANSWER IS AT YOUR FINGERTIPS.

®

DO YOU KNOW WHAT YOURRENTAL MACHINE IS DOING?

DO YOU KN

DO YOU KN

OW WHADO YOU KN

T Y WHA AT YOUR

T YOUR

REDO YOU KN

AL TTAL MACHINNREDO YOU KN

AL MACHINWITH KOMTRAX

OW WHADO YOU KN

IS DOINAD MACHINERAND ROWITH KOMTRAX

EAL MACHINT Y WHA AT YOUR

G?,YY,D MACHINER RY

IS DOINT YOUR

Phoenix 602.252.7121Gilbert 480.545.2400ARIZONA

Phoenix 602.252.7121Gilbert 480.545.2400

THE ANSWER

your direct involvement,make KOMTRAX an everthey are working.KOMTRAX will keep track of where your machines are and ho

FINGEROUR T YIS A AT YTHE ANSWER

KOMTRAX can keep you informed of machine your direct involvement,yday part of your business.make KOMTRAX an ever

t will pleasantly surprise you is hoWhathey are working.KOMTRAX will keep track of where your machines are and ho

.TIPSFINGERRTIPS

®

KOMTRAX can keep you informed of machine Without pinging or yday part of your business.

w easy it is to t will pleasantly surprise you is how much KOMTRAX will keep track of where your machines are and ho

CALIFORNIA

te 602.25Corporaate 602.252.7121ucson 800.989.8TTucson 800.989.8681

Prescott 928.778.5621

CALIFORNIA

te 602.252.7121ucson 800.989.8681

Prescott 928.778.5621

while burning less fuel.tors to improve efficiencies and get more work done faster coach opera

important dais keeping you informed of notable events,

tion changes or notable machine health issues.locayour direct involvement,

while burning less fuel.tors to improve efficiencies and get more work done faster ta such as working effort and idle time thaimportant da

s seamlessly ga it’is keeping you informed of notable events,tion changes or notable machine health issues.

KOMTRAX can keep you informed of machine your direct involvement,

tors to improve efficiencies and get more work done faster t can help you ta such as working effort and idle time tha

thering s seamlessly gaAnd while KOMTRAX tion changes or notable machine health issues.


Coming Soonve Moja


Coming Soon

NEW MEXICO

NEW MEXICO

aso 915.872.1001El PTEXAS

aso 915.872.1001

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 27, 2014 •

Massey Ferguson MF65, Stk#: 9618, 2WD, 3Point & PTO, 2,153 hrs., 6.00x16 Front Tires,14.9x28 Rear Tires ................................$4,250

2001 Cat D250E-2, Stk#: 9595, EROPS, A/C,9,294 hrs., 23.5x25 Tires ....................$42,500

2007 John Deere 450J LGP, Stk#: 9340,OROPS, 6 Way Blade, 5,631 hrs., 24" Pads, 9'7" Wide ................................................$39,500

2009 Komatsu PC78US-6NO, Stk#: 9178,EROPS, A/C & Heat, FM Stereo, 2,438 hrs., 18"Rubber Tracks, 36" Bucket, 7' 7" Blade, 4 Cyl.Komatsu Eng. ......................................$56,500

2007 Multiquip, Stk#: 8596, 85-89 KVA, 4,919hrs., St225x75Dx15 Tires, 4 Cyl. JD Eng$24,500

2006 JLG 860SJ, 9622, 500 lbs., 86 ft., 4WD,4,901 hrs., 15x625 Foam Filled Tires, 4 Cyl.Deutz Eng. ............................................$69,500

2008 Cat D6T XL, Stk#: 9526, EROPS, A/C,Sweeps, SU Tilt Blade, 6,609 hrs., 24" Pads,PA56 Winch........................................$159,500

2006 Cat D6R III XL, Stk#: 9113, EROPS, A/C,Sweeps, Rear Screen, Angle Blade, 6,078 hrs.,80% U/C, 24" Pads, 10' 8" Wide ........$129,500

2001 JLG 400X, Stk#: 9234, 500 lbs., 40 ft.,5,686 hrs., 4WD, 12x16.5 Tires, 3 Cyl. DeutzDiesel Eng. ..........................................$21,500

2001 Cat 160H, Stk#: 9485, EROPS, A/C, FMStereo, 6,070 hrs., 17.5x25L-2 Tires, 14 ft.M/B,9 ft. Wide............................................$109,500

2008 Lull 1044C-54, Stk#: 9453, 9,000 lbs., 42ft., 6,946 hrs., 4WD, 4WS, 48" Forks, 51" TiltFrame, 14.00x24TG Foam Filled Tires, Hyd. SelfLeveling System, 4 Cyl. JD Eng. ..........$46,500

2007 Cat 420E IT, Stk#: 9645, EROPS, A/C, FMStereo, 0 hrs. new meter, 24" Bucket w/Hyd.Thumb, Extendahoe, Pilot Controls, 54" Forks,62" Frame, 12.5x80x18 Front Tires, 19.5Lx24Rear Tires ............................................$46,500

2007 Ingersoll-Rand SD77DX, Stk#: 9382, 66"Smooth Drum, 275 hrs., 14x9x24 Tires, 4 Cyl.Cummins Eng., 9' 4" Height. ................$61,500

2009 Volvo G930, Stk: #9246, EROPS, A/C, FMStereo, 5,505 hrs., 14 ft. Blade, Rear Ripper,14.00x24 Tires, 10' 9" Height, 8 ft. Wide, 6 Cyl.Volvo Eng ............................................$119,500

2000 Ford F750, Stk#: 9631, A/C, FM Stereo,28,745 Miles, 5,499 hrs., International Eng.,11Rx22.5 Tires ....................................$33,500

2007 Ditch Witch RT40, Stk#: 9435, OROPS,4WD, 1,227 hrs., 64" Push Blade, Side ShiftBoom, 6" Trench, 3 Cyl. Deutz Diesel Eng $14,500

2006 R&D Tag A Long, Stk#: 9629 ......$4,900

2007 Doosan D35S2, Stk#: 9565, 8,000 lbs., 15ft., 1,690 hrs., 48" Forks, 48" Frame, 8.25x15Front Tires, 7.00x12 Rear Tires, 6 Cyl. DoosanDiesel Eng. ..........................................$15,500

2011 John Deere 650J LT, Stk#: HR-88,OROPS, Forestry Package, 6 Way Blade, 80%U/C, 2,453 hrs., Ripper Valve, 18" Pads, Height9' 5", Width 8' 9', Width Track to Track 6' 7" ..................................................................$79,500

2007 Gehl RS8-42, Stk#: 9452, 8,000 lbs., 42Ft., 3,851 hrs., 4WD, 4WS, 48" Forks, 66" Frame,13.00x24 Foam Filled Tires, Hyd. Self LevelingSystem, 4 Cyl. JD Eng. ........................$32,500

2012 John Deere 210G LC, Stk#: 9418, EROPS,A/C, FM Stereo, 2,879 hrs., 42" Bucket, 32" Pads,10' 6" Wide ............................................$132,500

2005 Case 550H, Stk#: 9607, OROPS, Sweeps,Rear Screen, 6 Way Blade, 3,943 hrs., 20" Pads,4 Cyl. Case Eng., 9' 2" Wide. ................$26,500

2011 JLG 10042, Stk#: 9548, 10,000 lbs., 42 ft.3,023 hrs., 4WD, 4WS, Aux. Hyd., 48" Forks, 74"Frame, 17.5x25L-2 Tires, 4 Cyl. Cummins Eng. ..............................................................$79,500

2006 John Deere 700J LGP, Stk#: HR-364,EROPS, A/C, Sweeps, Rear & Side Screens, 6 WayBlade, 6,062 hrs., 30" Pads, 11 ft. Wide $65,000

2006 John Deere 9520, Stk#: 9343, EROPS,A/C, FM Stereo, 7,177 hrs., 76x50.00B32 or1250/45B32 Tires, JD Eng., 12' Wide, 11' 7"Height, Bucket, 6 Cyl., 11' 4" Height ..$125,000

2013 Case 85C, Stk#: 9606, (New) EROPS, A/C,Heat, 8 hrs., 4X4, 280/85Rx24 Front Tires,420/85Rx30 Rear Tires, 4 Cyl. Case Eng$46,500

1967 Cat D6C, Stk#: 9583, OROPS, Sweeps,Rear Screen, St/Tilt Blade, 22" Pads, 10' 6"Wide. ....................................................$25,500

2007 Ingersoll-Rand SD45D TF, Stk#: 9516, 54"Smooth Drum, 472 hrs., 12.4x24 Tires, 4 Cyl.Cummins Eng ......................................$29,500

2002 JLG G9-43A, Stk#: 8879, 9,000 lbs., 43 ft.,5,262 hrs., 4WD, 60" Forks, 74" Frame, 13.00x24Foam Filled Tires, 4 Cyl. JD Eng ..........$34,500

2006 Case 570M XT, Stk#: 9634, OROPS, 4WD,2,567 hrs., 7 ft. Box Blade w/Scarfiers, 12x16.5Front Tires, 19.5x24 Rear Tires............$24,500

2008 Cat D6T LGP, Stk#: 9489, EROPS, A/C,St/Tilt Blade, 9,247 hrs., 36" Pads, 13' 2" Wide ............................................................$129,500

2006 John Deere 135C, Stk#: 9613, EROPS,A/C, 1,915 hrs., 36" Bucket w/Hyd. Thumb, 24"Pads, 8' 7" Wide ..................................$49,500

2005 JLG G10-55A, Stk#: 9630, 10,000 lbs., 55ft., 4WD, 4WS, 5,692 hrs., 48" Forks, 74" Frame,Aux. Hyd., 4 Cyl. JD Eng ......................$52,500

"In Business for over 32 Years"www.hendrixmachineryllc .com

1-936-327-5430 • Email: [email protected] Se HablaEspañol

2008 Club Car XRT 1550, Stk#: 9537, 4WD,1,283 hrs., 25x11.00x12 Tires, 2 Cyl. Gas Eng ................................................................ $75,000

2006 Skytrak 6042, Stk#: 9266, 6,000 lbs., 42Ft., 2,320 hrs., 4WD, 4WS, 48" Forks, 48" Frame,Aux. Hyd., 13.00x24 Foam Filled Tires, Hyd. SelfLeveling System, 4 Cyl. Cummins Eng...$34,500

2013 Case SV185, Stk#: 9525, OROPS, 4 hrs.,64" Bucket, Aux. Hyd., Hyd. Quick Coupler, 4 Cyl.CNH Eng ..............................................$38,500

2012 Bobcat T650, Stk#: 9562, EROPS, A/C, FMStereo, 2,896 hrs., 78" Bucket w/Teeth, 18"Rubber Tracks, Aux. Hyd., 4 Cyl. Kubota Eng. ................................................................$39,500


Construction Equipment Guide Western Edition (ISSN 2330-9792) is published bi-weekly by Construction Equipment GuideLtd. Advertising and Editorial Offices are located at 470 Maryland Dr., Ft. Washington, PA 19034. Toll Free 800/523-2200 or Fax 215/885-2910. Annual Subscription Rate $65.00. Call for Canadian and foreign rates.

Periodicals postage paid at Ft. Washington, PA and at additional mailing offices. POSTMASTER: Send address changes toConstruction Equipment Guide Western Edition, 470 Maryland Dr, Ft. Washington, PA 19034.Contents Copyrighted ©2013, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S.Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (includingframing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, let-ters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subjectto Construction Equipment Guide's unrestricted right to edit and comment editorially. Contributor articles do not necessarilyreflect the policy or opinions of this publication.Call or write for advertising rates, publication schedule and media kit. The Construction Equipment Guide is not responsiblefor clerical or printer's errors, every care is taken to avoid mistakes. Photographs of equipment used in advertisementsare not necessarily actual photographs of the specific machine. Similar photographs are used occasionally and every effortis taken to depict the actual equipment advertised. The right is reserved to reject any advertising.

WESTERN EDITIONCirculated Throughout • Alaska • Arizona • California • Colorado • Hawaii

• Idaho • Montana • New Mexico • Nevada • Oklahoma • Oregon • Texas • Utah • Washington • Wyoming

Founder, Publisher & CEO Edwin M. McKeon Sr.Western Publisher Edwin M. McKeon Jr.

Editor In Chief Craig Mongeau Associate Editor Christine Wolkin

Editorial Consultant Pete Sigmund Production Mgr. John Pinkerton

Controller Tom WeinmannCirculation Mgr. Cathy Printz

Main office 470 Maryland Drive Fort Washington, PA 19034 215/885-2900

Toll Free 800/523-2200 Fax 215/885-2910

Web site www.constructionequipmentguide.comEditorial e-mail [email protected]

Advertising e-mail [email protected]

For advertising rates: Contact Kent HogeboomNational Sales Manager315/866-1423

Toll Free 800/988-1203Fax 315/866-1379

e-mail [email protected]

Contact Dale Agnew• Colorado • Louisiana• Oklahoma • Texas

Toll Free 877/877-4997 Fax 972/695-6049


Contact Dennis Hogeboom• Arizona • California • Hawaii • Nevada • New Mexico • Utah 602/679-8759


Contact Patrick Kiel• Idaho • Montana • Oregon • Washington • Wyoming

Toll Free 866/413-4265Fax 952/353-2750


Mobile LinkedIn Facebook Twitter YouTube

To read these stories and many more, visit www.constructionequipmentguide.com

IN THIS ISSUE548 56

®

SPECIAL SECTION16 MINI & COMPACT EQUIPMENTBe sure to check out this special section!

Keep up to date with the latest information on mini and compact equipment.

FEATURES8 AGC PRESENTS INDEPENDENCE EXCAVATING WITH SAFETY AWARDFor a second time, Associated General Contractors (AGC) awarded Independence Excavating its National AGC Safety Excellence Award — First Place in the Federal andHeavy Division for 700,000 to 1 million hours worked.

10HOLT CAT, DUBISKI TARGET SKILLS GAPHOLT CAT, the Caterpillar Equipment and Engine dealer of south, central, north and north east Texas, knows about the skilled trades gap, and has formed an innovativepartnership with John A. Dubiski High School in Grand Prairie to do something about it. The program has been so successful that the Dallas Regional Chamber awardedHOLT with the Blueprint Education Catalyst Award on Nov. 6.

10MDT CONSIDERING NEW BLACKFOOT RIVER I-90 BRIDGE BUT NEEDS FUNDINGMontana highway officials are working on plans for a new interstate highway bridge over the Blackfoot River — even though there’s no money for a new bridge yet.

49HAWTHORNE CAT EXPANDING, HIRING IN SAN DIEGO, HAWAIIHawthorne Cat is seeking qualified applicants to fill a variety of positions from service technicians to management. Qualified candidates have the opportunity to work withCaterpillar — the world-renowned manufacturer of industry leading construction equipment, power generation and marine propulsion engines for nearly 100 years.

54 FLASKA JCB CUSTOMERS SHOW SKILLS AT BACKHOE RODEOFlaska JCB of Phoenix, Ariz., held an open house and “Backhoe Rodeo” on Nov. 21, at its Buckeye Road location.Highlights of the event included the Dancing Diggers backhoe exhibition and the JCB HMEE, an armored backhoe loader for military applications.

56 RITCHIE BROS. CONDUCTS MULTI-MILLION DOLLAR LOS ANGELES SALEMore than 3,400 bidders participated online and in person at Ritchie Bros. Auctioneers’ multi-million dollar unreserved public equipment auction in Los Angeles, Calif., onDec. 11, 2014.

EQUIPMENT34 LEAD EDGE Multi-Ripper Talon Bucket

41 HAMM HD+ Series Rollers

42 VOGELE Super 2100-3i Series Pavers

DEPARTMENTS49 CLASSIFIEDS

51 COMING AUCTIONS

52 BUSINESS CALENDAR

THE BEAST BRINGS EVERYTHINGYOU NEED TO GET THE JOB DONE.Tame your toughest jobs with the raw power of KOBELCO excavators. With features like an exclusive independent travel system, operator controlled power boost and a heavy-duty cooling system, you can count on KOBELCO to get more done in less time. Plus, premier operator comforts and industry leading visibility mean you’ll actually enjoy operating these machines.

KOBELCO-USA.COM

Up to 84 months of full machine coverage. KOBELCO Premium Protection Plan



NEVER SETTLE.When you need to move dirt and rock quickly, you need our R 936 crawler excavator. Advanced electronics let drive components work together efficiently to save fuel. Sensor-guided controls give you speed, precision and power. And robust cast steel components stand up to the toughest environments. It’s all built to last with exclusive Liebherr components.

We haven’t compromised on anything; why should you?

liebherr.com

ALASKADelta Industrial Serviceswww.deltaindustrial.comDelta Junction(907) 895-5053

ARIZONABejac Corporationwww.bejac.comPHOENIX(800) 77-BEJAC

CALIFORNIABejac Corporationwww.bejac.comPLACENTIA(800) 77-BEJAC

SACRAMENTO(800) 77-BEJAC

REDDING(800) 77-BEJAC

IDAHOCentral Equipment Companywww.centralequipmentidahosales.comPOCATELLO(208) 233-2850(888) 617-2815

MONTANAWestate Machinerywww.westate.comBILLINGS406-373-6010 (800) 999-6676

NEVADALiebherr Mining Equipmentwww.liebherr.usELKO(775) 738-7386

Bejac CorporationRENO(800) 77-BEJAC

TEXASNueces Power Equipmentwww.nuecespower.comCORPUS CHRISTI(361) 289-0066

VICTORIA(361) 576-0066

LAREDO(956) 725-0066

SAN BENITO(956) 361-0066

Liebherr Equipment Source www.liebherrequipmentsource.comHOUSTON, TX(866) 961-9358

WYOMING Liebherr Mining Equipmentwww.liebherr.usGILLETE(307) 686-0948

SAN FRANCISCO (800) 77-BEJAC

FRESNO(800) 77-BEJAC

SAN DIEGO(800) 77-BEJAC

EDINBURG(956) 702-0066

EL PASO(915) 541-0066

SAN ANTONIO(210) 310-0066

JEROME(208) 324-8515

Fairbanks(907) 452-5053


When abackhoe’s

not bigenough!

Since 1962

santa ana, Ca – Hq(714) 554-4851

Riverside, Ca(951) 276-9025

Coachella, Ca(760) 578-1043

visalia, Ca(559) 651-0116

stockton, Ca(510) 516-5567

sacramento, Ca(916) 997-7492

san Diego, Ca(619) 205-2026

phoenix, aZ(602) 276-2040

Bullhead City, aZ(928) 715-0672

las vegas, nv(702) 877-4302

salt lake City, ut(801) 796-7368

Boise, iD(208) 459-3800

edmonton, alberta(780) 490-6965

Ft. mcmurray, alberta(780) 598-0132

Williston, nD(701) 572-8126

Heavy equipment Rentalsserving the Construction and mining industries

TIER 4/TIER 3RENTAL UNITS

AGC Presents Independence Excavating With Safety AwardFor a second time, Associated General

Contractors (AGC) awarded IndependenceExcavating its National AGC SafetyExcellence Award — First Place in theFederal and Heavy Division for 700,000 to 1million hours worked. IndependenceExcavating received this award based uponits exceptional safety performance, well-implemented safety program and an incidentrate at least 25 percent below that of its AGCmember peers.Independence Excavating’s Safety

Director Tom Steblinski cited the firm’s per-sonalized safety approach as the basis forthis award, as well as the absence ofreportable injuries on major projects includ-ing the Cleveland Convention Center demo-lition and site package and the Ford BrookPark engine plant demolition. “In my experience outside the firm,

[Independence Excavating’s] safety pro-gram is unlike most construction companieswhere safety personnel are office-based, pro-cessing workers’ compensation and paper-work. Our safety specialists and coordina-tors spend 80 percent of their time in thefield developing relationships with the guysdoing the work. We’re not the safety police,trying to catch them doing somethingwrong. We develop trusting relationships

with the workers and get their buy-in onsafety. Our safety personnel come from fieldpositions; we’ve been in their shoes. Theguys understand that we’re here to help themgo home safely to their families by abidingby safety regulations, all while helping themdo their jobs,” said Steblinski.The firm also finds its safety commitment

creates cost savings for its clients “Accidents — especially severe accidents

— will impact the day of the event and, tosome extent, the schedule going forward. Wemaintain utmost safety measures because weunderstand that accidents affect morale, thespeed of work, and our team’s comfort. Ourcommitment to safety and preventing

accidents delivers cost savings on each proj-ect,” said Steblinski.In fact, Independence Excavating remains

one of the few Ohio construction firms of itssize that is approved by the state of Ohio toself-insure workers’ compensation. The firmwas awarded self-insured status in 2005because of its strong financial standing andexcellent safety record. “We pass the cost savings gained from not

having to pay premiums on to our clients,giving them an even better price on eachjob.”With offices in Cleveland, Pittsburgh and

Chantilly, Va., Independence Excavating isan industry leader in challenging site devel-opment, heavy industrial applications, dem-olition, environmental solutions, concreteconstruction, aggregate crushing and one ofthe Midwest’s premier and diversified con-struction companies. Founded in 1956 bythe DiGeronimo family, IndependenceExcavating has earned a solid reputation forhonesty, integrity and outstanding perform-ance.For more information, visit

www.indexc.com.(This story also can be found on

Construction Equipment Guide’s Web site at

www.constructionequipmentguide.com.)

PRNewsFoto/Independence Excavating Inc. photo(L-R) are Willis Construction Practice Chairman, Paul Becker; IndependenceExcavating Safety Director Thomas Steblinski; Captain Richard Phillips;Independence Excavating President Victor DiGeronimo Jr.; and Associated GeneralContractors President Paul Diederich.


2007 Komatsu PC220LC-8: #81992, Cab/AC, 9’7”Arm, KOMTRAX, 7350 Hrs........................$99,500

1999 Komatsu D41P-6: #5952, Cab/AC, 28”Tracks, PAT Blade, 4750 Hrs......................$59,500

2006 Komatsu PC228USLC-3: #82164, Cab/AC,JRB QC, Hyd Thumb, 4550 Hrs ..............$139,500

2003 Komatsu PC200LC-7: #92106, Cab/AC, 9’7”Arm, 31.5” Tracks, Aux Hyd, 6300 Hrs ....$79,500

2006 Komatsu PC200LC-8: #82111, Cab/AC, 9’7”Arm, 31.5” Tracks, KOMTRAX, 4100 Hrs$121,500

2002 Komatsu PC95R-2: #50051, Cab/Heat, 20”Tracks, Aux Hyd, Blade, 1950 Hrs ............$69,500

2001 Komatsu PC138US-2: #80876, Cab/AC, 8’6”Arm, 4550 Hrs............................................$59,500

2005 Komatsu D61EX-15: #91765, Cab/AC, 24”Tracks, PAT Blade, 2650 Hrs ..................$134,500

2004 Komatsu PC160LC-7: #81899, Cab/AC, AuxHyd, 5100 Hrs............................................$84,500

2001 Komatsu PC220LC-6: #80381, Cab/AC, 60’Long Front, 60” Long Front, 60” Ditching Bkt,5700 Hrs ..................................................$139,500

2008 Komatsu PC270LC-8: #91822, Cab/AC, 11’6”Arm, 31.5” Tracks, JRB QC, 10,150 Hrs ..$99,500

2008 Komatsu D65EX-15EO: #81377, Cab/AC,24” Tracks, Drawbar, 3300 Hrs ..............$159,500

Call Doug / Sam:

(866) 485-7180


BONNER, Mont. (AP) Montanahighway officials are working on plansfor a new interstate highway bridgeover the Blackfoot River — eventhough there’s no money for a newbridge yet. Montana Department of

Transportation officials aim to replacethe Interstate 90 bridge and remove thepiers in the river, The Missoulianreported. “We don’t have any funding identi-

fied for it, but we really want to get tothe environmental phase because wehave to do that regardless,’’ said EdToavs, MDT’s Missoula districtadministrator. “Once we do that andget a preliminary design in the envi-ronmental document, that allows us inthe future when funding does becomeavailable, to really start working on thespecific bridge design and then con-struct it.’’ The MDT held its first open house

on the project Oct. 30, even though thestate is at least five years from the con-struction phase.

Built in the 1960s, the current I-90bridge stands on piers that block themiddle of the channel, causing a safetyconcerns for recreational floaters. Interstate 90 bridges eastbound and

westbound are two of five that span theBlackfoot within a half-mile of itsmouth. The other three — a pedestrianbridge, the Montana state Route 200span and a Montana Rail Link trestle— are supported by piers and abut-ments on either side of the river. Onlythe I-90 piers block the middle of achannel that was narrowed significant-ly when Milltown Dam was removedin 2008. Until this summer, the fish and

wildlife division of Montana Fish,Wildlife and Parks had kept the stretchclosed to river traffic altogether for fearthe hydraulics around the piers couldcause entrapment issues. The ban waslifted July 1 but will be reinstated forfuture Mays and Junes. “The department as a whole is defi-

nitely supportive of addressing the pierissue,’’ said Chet Crowser, Region 2

parks manager of the FWP. “For a longtime now, there’s been a fair amount ofdiscussion amongst the local commu-nity here about the piers and safetyissues and what we can do to addressthose.’’ The obstructing piers also show

signs of scouring around the base,Toavs said. Bridge inspections have not found

anything deficient on either interstatebridge. “They’re in good shape that way,’’

Toavs said. The MDT envisions two new

bridges in the same places and on thesame alignments. The river is now nar-row enough to be easily spanned by atwo-lane freeway bridge without a pierin the middle. “I don’t anticipate an exotic

design,’’ Toavs said. “It’s somethingthat’s very common and doable.’’

(This story also can be found on

Construction Equipment Guide’s Web

site at www.constructionequipment-

guide.com.)

MDT Considering New BlackfootRiver I-90 Bridge But Needs Funding

HOLT CAT, the Caterpillar Equipment and Engine deal-er of south, central, north and north east Texas, knows aboutthe skilled trades gap, and has formed an innovative partner-ship with John A. Dubiski High School in Grand Prairie todo something about it. The program has been so successfulthat the Dallas Regional Chamber awarded HOLT with theBlueprint Education Catalyst Award on Nov. 6. HOLT CAT depends upon highly skilled technicians who

are in short supply across the nation. In addition to the usualapproaches of attracting talent via great work environments,the company developed an internship program at Dubiskithat helps young people develop into experienced heavyequipment technicians. It’s one way the company is helpingmanage the skilled trades gap that affects all industries.“We have a vested interest in the workforce of today as

well as tomorrow, and the internship program with Dubiskiprovides mutual benefits to the company and to the studentswho can get paid for learning advanced technical skills,”said Allyn Archer, president and chief operating officer ofHOLT CAT. “We are honored at the recognition this pro-gram has received, and most importantly, it’s validation ofthe value that skilled trades programs can offer to students inhigh school.”HOLT CAT recently pledged $1 million to vocational

education and training in Texas over the next three years.Dubiski and HOLT created a unique internship program

in 2012 to offer junior and senior students paid internshipsand world-class training by pairing them with seasoned tech-

nicians in the repair and maintenance of heavy equipmentand engines, including hydraulics, electronics and dieselengines. The interns graduate from Dubiski with the basicskills in the heavy equipment industry required to join theworkforce as entry-level technicians. Since 2012, HOLT hasinvested more than $225,000 into the internship programand skills building with Dubiski students, and more than 80percent of the internship participants have been offered full-time positions with HOLT. “The partnership we have formed with HOLT has

allowed our students to graduate with the necessary skills togain a high school degree and have the opportunity to liveout the American dream,” said Rick Elmore, Dubiski Schoolof Transportation program facilitator. “Former interns whoare now HOLT technician number one’s have been able tostep up in their family and take a financial leadership rolebecause of this partnership. Outside of this program andschool, I don’t know many 18-year-old men and womenwho are able to do that.”HOLT is committed to vocational and technical education

in north Texas. The company annually awards financial sup-port to other area high schools and colleges through theCaterpillar Dealer Excellence Fund. Participating schoolsbesides Dubiski include Skyline High School in Dallas,Cedar Valley College in Lancaster and Birdville HighSchool in North Richland Hills.

(This story also can be found on Construction Equipment

Guide’s Web site at www.constructionequipmentguide.com.)

HOLT CAT, Dubiski Target Skills Gap


Steel Trench Shields

Southwest U.S.’ COMPLETE Factory-Direct Rental Resource

Slide Rail System Build-A-Box™

TE

ACTOR FFACTORY-DIRECT Sales & RentalS.’ COMPLESouthwest U.

Direct Rental ResourceLargest selection of USA-made trench shielding and shoring equipment.Custom shields built to your specs.

y-

ACTORY-DIRECT Sales & Rental FactorTE

Largest selection of USA-made trench shielding and shoring equipment.Custom shields built to your specs.

ACTORY-DIRECT Sales & Rental

Special Operations Shoring Division.raining.Safety Trench TOSHAA T

Special Operations Shoring Division.raining.

rench ShieldsT Steel

NORTH TEXASve.AAve.3602 N. Sylvania 11TX 761orth, Ft. W o

(815) 502-1444

Build-A-Box™

ONHOUST2515 Galveston Rd.

77017Houston, TX (713) 671-2551

Slide Rail System

WHERE PRODUCTIVITY MEETS PROFITABILITYEasy maintenance. Low operating costs. Long service intervals. Maximize your productivity and profits with Atlas Copco breakers.

Call today. Get more done tomorrow. 800-732-6762 | www.atlascopco.us

» The #1 Selling Rubber Track Brand In America! »

Ashland, VA » Jacksonville, FL » Dallas, TX » Cincinnati, OH » Portland, OR » Sacramento, CA » Schenectady, NY

Order online anytime » depparts.com »800-365-7260

WE ACCEPT

We Keep Equipment Moving!Call me today, I’ll be glad to help you!

~ Danny

REPLACEMENT UNDERCARRIAGE

982,972®TAATCkaTTa,®gnatsuMeG,®tacboB

MECALPERRRACREDNU

nalhsA992&,®ihcuek

,®lhe

TNEMEGAIR

7e

-653-008llaD»LF,ellivnoskcaJ»AVVA,dn

S1#ehTTh»

60r

27 »drO

troP»HO,itannicniC»XT,sal

BkcarTTrrebbuRgniinlllle

m

»

oc.strapped»tynaenilnored

»AC,otnemarcaS»RO,dnalt

!aciremAnIdnar

»memit

YN,yy,datcenehcS

TPECCAEWWE



For All YourEquipment Needs!

Authorized Dealer For

www.BCESPower.com

Finance & Lease RatesStarting as Low as .0 APR!

SALES • PARTS • SERVICE

North Texas3401 E. Park Row Dr.Arlington, TX 76010

817.633.1010

South Texas2210 McAllister Rd.Houston, TX 77092

713.681.9221

North LouisianaWest Monroe, LA 71292

817.633.1010

SAVE TIME • SAVE MONEY • SAVE LABOR • SAVE OIL

• No tools required• No expensive hardware needed

• No more rags stuffed into hoses

• No more messy plastic caps

• The ultimate contamination control tool

• One hand installation• Eliminate hydraulic oil spills & clean up

• Quick installation & ease of usage

• Safe for personnel & environment

• Industry acclaimed• 100% Made in USA

For more information contact Mike Pearl at914.980.8890 or email mike @ flangelock.comwww.flangelock.com


Allis-Chalmers Forest Green HD21 Dozer/Ripper, 1:50 Scale$85

Allis-Chalmers Orange HD21 Dozer/Ripper, 1:50 Scale..........$85

Allis-Chalmers Yellow HD21 Dozer w/Ripper, 1:50 Scale ...... $85

Bobcat E35 Compact Excavator, 1:25 Scale ............................$50

Bobcat E55 Compact Excavator, 1:25 Scale ............................$60

Bobcat M400 Gold Skid Steer Loader, Scale 1:25 ..................$25

Bobcat S175 Skid Steer Loader, 1:25 Scale ..............................$65





Bobcat T550 Track Loader, 1:25 Scale ......................................$70

Bobcat 225 Compact Excavator, 1:25 Scale ............................$50

Case CX250C Excavator, 1:50 Scale ........................................$195

Case 850B Dozer (NZG), 1:35 Scale..........................................$120

Case 1102 Vibromax Roller, 1:35 Scale....................................$100

Caterpillar CT660 Day Cab Tractor w/Trail King Lowboy Trailer,

1:50 Scale ......................................................................................$100

Caterpillar 775G Off-Highway Truck, 1:50 Scale ....................$110

Caterpillar D5K2 LGP Track-Type Tractor, 1:50 Scale ............$65

Caterpillar D7E Track-Type Tractor, 1:50 Scale ........................$90

Caterpillar D8N Track-Type Tractor (NzG), 1:50 Scale ..........$150

Caterpillar D8T Track-Type Tractor, 1:50 Scale ......................$110

Caterpillar D9N Track-Type Tractor (NZG 298), 1:50 Scale ....$75

Caterpillar D10N Track-Type Tractor, 1:50 Scale ......................$50

Caterpillar D10 Track-Type Tractor (Conrad), 1:50 Scale......$185

Caterpillar D10T Track-Type Tractor, 1:50 Scale ....................$100

Caterpillar D11N Track-Type Tractor (Conrad), 1:50 Scale ..$185

Caterpillar D11R Track-Type Tractor, 1:50 Scale ....................$100

Caterpillar MH3049 Material Handler w/magnet, 1:50 Scale $150

Caterpillar 323D L Excavator, 1:50 Scale ..................................$90

Caterpillar 336D L Excavator, 1:50 Scale ..................................$95

Caterpillar D350D Articulated Dump Truck, 1:50 Scale ..........$50

Caterpillar 215 Excavator (NZG), 1:50 Scale ..........................$140

Caterpillar 365B L Series II Excavator, 1:50 Scale....................$75

Caterpillar 953 Traxcavator, NZG, 1:50 Scale............................$90

Caterpillar 963D Track Loader, 1:50 Scale ................................$60

Caterpillar 988K w/ Grapple, 1:50 Scale ..................................$160

Caterpillar 994H Wheel Loader, 1:50 Scale ............................$215

Demag Tracked Paver (NZG), 1:50 Scale ..................................$75

Doosan Moxy MT31 Articulated Truck ....................................$100

Dynapac SD2500 CS Road Paver, 1:50 Scale ........................$150

Fiat Allis 41B Dozer (Yellow), 1:50 Scale..................................$120

Grove GMK 3050 All Terrain Crane, 1:50 Scale ......................$120

Grove RT750 Rough Terrain Crane, 1:55 Scale......................$100

Grove TM1500 White 12 Axle Truck Crane, 1:50 Scale ........$160

Hamm 3414 Pad Foot Compactor, 1:50 Scale ..........................$90

International 175 Crawler Loader, 4in1, 1:50 Scale..................$65

International 433 Dual Engine Pay Scraper, 1:25 Scale........$225

International TD-14 Crawler Dozer, 1:16 Scale ......................$150

International TD-15 Dozer w/Umbrella, 1:50 Scale ..................$60

International TD-20E Dozer, 1:64 Scale ......................................$24

International TD-25 Dozer w/Ripper, 1:25 Scale ....................$180

John Deere “BO” Lindeman Crawler Tractor, 1:16 Scale ......$70

John Deere 200C LC Excavator, 1:50 Scale..............................$45

John Deere 310J Backhoe/Loader, 1:50 Scale ........................$40

John Deere 315SJ Backhoe/Loader, 1:50 Scale ......................$40

John Deere 624J Military Wheel Loader, 1:50 Scale................$40

John Deere 772CH Motor Grader, 1:50 Scale............................$45

John Deere 850K Dozer, 1:50 Scale............................................$65

John Deere 870GP LC Grader, 1:50 Scale ................................$50

John Deere 959K Track Feller Buncher, 1:50 Scale ................$90

Komatsu CK25 Compact Track Loader, 1:50 Scale ................$45

Komatsu D51 EX Dozer, 1:50 Scale ............................................$85

Komatsu D65 EX-17 Dozer w/Ripper 1:50 Scale ......................$80

Komatsu D65PX-17 Dozer, 1:50 Scale........................................$80

Komatsu D155AX Dozer w/ripper, 1:50 Scale ..........................$95

Komatsu D375A Dozer, 1:50 Scale............................................$125

Komatsu D475A Dozer w/ripper, 1:50 Scale............................$160

Komatsu GD655 Motor Grader, 1:50 Scale................................$90

Komatsu HD605 Off-Highway Truck, 1:50 Scale ......................$80

Komatsu HM250 Articulated Dump Truck, 1:50 Scale ............$75

Komatsu HM400-3 Articulated Truck, 1:50 Scale ..................$100

Komatsu PC200 Excavator, 1:50 Scale........................$160

Komatsu WA470-7 Wheel Loader, 1:50 Scale ..........................$75

Komatsu WA500 Wheel Loader, 1:50 Scale ..............................$80

Komatsu WB146 Backhoe/Loader, 1:50 Scale ........................$75

Komatsu WH613 Telehandler, 1:50 Scale ..................................$65

Komatsu Mack Granite MP w/Lowboy Trailer, 1:50 Scale ......$90

Leeboy 785 Motor Grader, 1:64 Scale ........................................$90

Liebherr LTM 1025 Mobile Crane, 1:50 Scale..........................$125

Poclain 160 Excavator, 1:50 Scale ............................................$150

Poclain TC45 Excavator, 1:50 Scale ........................................$140

Terex 33-07 Off-Highway Truck, NZG, 1:40 Scale ....................$90

Vogele MT3000 Powerfeeder, 1:50 Scale ................................$140

Vogele Vision 5200-2 Tracked Paver, 1:50 Scale ....................$115

Volvo L220G Wheel Loader, 1:50 Scale ..................................$120

Wirtgen 100F Tracked Cold Milling Machine, 1:50 Scale......$120

Shipping and Handling Included

Contact – Barry McKeon800-523-2200 Ext. 197 • 610-506-5961 Cell

Email – [email protected]

CEG Scale Models470 Maryland Drive

Fort Washington, PA 19034Visit our Ebay Store – bmckeon collectibles – for a complete list with pictures.

Toys For Boys(and also men)Realistic Scale Models of Construction Equipment, ideal gifts for the Holidays, Birthdays, Graduation, etc.

Caterpillar D6R Track-Type Tractor, 1:50 Scale - $95

Komatsu PC360LC-10 Excavator, 1:50 Scale - $120

International 560 Payloader, 1:25 Scale - $125

International TD-25 Dozer, 1:50 Scale - $85

SUPER 2-BOLT - ON WHEEL KIT

HYDRAULIC TRACK INSTALLATION KIT

TOLL FREE 855-575-LUGS(5847)or 913-947-3934

www.bairproducts.comEmail: [email protected]

Got Lugs?

ALLOY CENTER BOGIE WHEELS

AVAILABLE SEPTEMBER 2014

REPLACEMENT DRIVE CARRIER PARTS


V / TST / AAAT / AC

STRAX P PAEREV / T

TOLL FREE

N WT - OLL OB-R 2PEUS

Factor

855-575-LUGS(5847)or 913-947-3934

oducts.com.bairprwwwoducts.comEmail: info@bairpr

855-575-LUGS(5847)

TIL KEEHN W

Bai ’ A lry

913-947-3934oducts.com

oducts.com

• 25% Thicker Steel Backing Plates


TNEMECALPRERA PREIRRA CVEIRD

G G

25% Thicker Steel Backing Plates

AVAILABLE SEPTEMBER 2014STR

Bolt-On ReplacementTrack Drive Lugs

Go ot ot Go Luo ug gs L s? Lug ? gsGot Lug ? s?

• Bolt-On Wheel Replaces Older Hub Style Wheels

• 100% Larger Axle Shaft• Greaseable/

Preload Adjustable•

30/50/60 ModelsCAT 247/257, ASV/TEREX

•& Sprocket Base

• Greaseable Carrier Unit

25% Thicker Steel Backing Plate

ASV / Terex 5AT 247/257/

RDYH

CAT 247/257/267/277/287ASV / Terex 50/60/85/100

es

• Install rubber tracks fast with Hydraulic Tools

• Fits most CAT/ASV/TEREX Compact Loaders

IN KOITAALLATSNK ICARC TILUAR

Install rubber tracks fast with Hydraulic ToolsFits most CAT/ASV/TEREX Compact Loaders

T

•

Y COLLAIEGOB

Bair Part #BW9F Flange Wheel

• CAT 277 / 287 D SERIES

• TEREX / ASV SR& PT 75/80/100G/110 MACHINES

SEE SLBALIAVVAA

Bair Part #BW9F

R ETNEY CSLEEH WIE

CAT 277 / 287 D

TEREX / ASV SR

410 2BERR 2METEP

G/110


Construction Equipment Guide • Mini & Compact Equipment Section • www.constructionequipmentguide.com • December 27, 2014 •

Cat 303E CR Offers Optimum Performance in Tight SpacesThe new Cat 303E CR mini-hydraulic

excavator, only 61 in. (155 cm) wide acrossthe blade and having a compact-radiusdesign that limits tail swing to less than 5in. (12 cm), is an easily transportedmachine that works efficiently and safely insmall spaces and on congested job sites.With a maximum operating weight of7,782 lbs. (3,530 kg), the 303E CR expandsthe Cat mini-excavator line and gives buy-ers more choice in the 2.75 to 3.85 ton (2.5to 3.5 t) size class. The new model’s 23.5-hp (17.5 kW) Cat

C1.3 engine combines with a powerfulload-sensing hydraulic system — deliver-ing flows to 23.1 gpm (87.6 Lpm) — toprovide productive, reliable performance indemanding applications, according to themanufacturer.Available both in cab and canopy config-

urations, the 303E CR is designed for theoperator’s convenience and safety. Alloperator stations, cab or canopy, are ROPS,TOPS and Top Guard Level 1 certified, andthe Cat interlock system, which preventshydraulic movement when the safety bar israised, adds further to operational safety, asdo the standard travel alarm, automaticswing brake, and 3 in.-wide retractableseatbelt.A large, adjustable suspension seat keeps

operators comfortable, and a monitor thatdisplays gauges and general diagnosticskeeps them informed. An automatic two-speed travel system enhances overallmachine efficiency and ease of operation,and an automatic engine-idle system con-serves fuel and reduces sound levels.

The 303E CR’s hydraulic system useslow-effort, pilot-operated joysticks thatprovide more precise, more consistent con-trol than mechanical-linkage controls. Foroperator convenience, auxiliary-hydrauliccontrols are integrated into the joysticks,making the 303E CR work-tool ready withboth a one-way-flow circuit for tools suchas hydraulic hammers and a two-way-flowcircuit when using work tools with cylin-ders or bi-directional motors. An in-cab pat-tern changer allows easily switching con-

trols to suit operator preference.To increase operator productivity and

efficiency, the 303E CR’s bucket can rotate200 degrees, providing increased materialretention at the top of the lift cycle whenloading trucks and allowing for deeper flat-back trenches without repositioning themachine. In addition, a lifting eye on thefront linkage provides a secure attachmentpoint for rigging.For added convenience, a float function

for the dozer blade allows the blade to fol-

low ground contour and create smooth fin-ish grades, perhaps eliminating an addition-al grading tractor on the project. Also adding to the 303E CR’s versatility

is its ability to use the bucket in a front-shovel configuration, an advantage for suchtasks as installing utility pipe, cleaningmaterial from inside truck bodies, or fillinga hopper next to a wall. When digging inconfined spaces, the 303E CR’s offsetboom provides added flexibility.To increase the 303E CR’s overall versa-

tility, a mechanical quick coupler is avail-able for accommodating work tools such asaugers and hydraulic hammers, and athumb-ready stick is standard. An accumu-lator in the auxiliary hydraulic systemsmoothes hydraulic action, prevents dam-aging pressure spikes, and releases pressurethrough the pilot system.Auxiliary lines are mounted low on the

stick, close to work tools, eliminating theneed to use long, flexible hoses, vulnerableto damage, to reach work tools. Quick-dis-connect couplers provide easy, spill-proofconnections with work tools, and for addedutility, the 303E CR accepts all Cat 303.5and 304 E Series mini-excavator worktools.Steel tracks are available for the 303E

CR, as an alternative to the standard rubbertracks, for use in applications that requirehigher resistance to sharp debris.For more information, visit

www.cat.com.(This story also can be found on



Video Series Showcases New Generation of JCB ExcavatorsJCB unveils part one of a three-

part online video series highlight-ing the new generation 85Z-1 and86C-1 compact excavators. Thefirst video gives viewers an insidelook at JCB’s rigorous manufactur-ing process, while the second andthird videos will showcase thedurable machines in action andJCB’s innovative approach toproduct design.“This impressive video series

helps communicate the care andexpertise that go into making everysingle excavator and theunmatched performance, reliabili-ty, durability and safety thesemachines offer,” said KeithHoskins, director of JCB compactequipment. “Launching on oursocial media channels enables us toreach a new generation of cus-

tomers who are seeking differentways to learn about products andhandle business.” Part one of the video series,

viewable on JCB’s YouTube pageand on Facebook, highlights JCB’sexpertise in manufacturing.Quality is built into every machineat the production facility inStaffordshire, England, as eachcompact excavator goes through aseries of rigorous checks per-formed throughout the process.The video also shows the class-leading manufacturers who supplykey components for the compactexcavators.Part two of the video series will

launch Nov. 26. The second videoshows the compact excavators inaction, performing a variety ofrugged, tough tasks. It demon-

strates the range’s versatility andproductivity, as well as key fea-tures of the excavators, includingsafety, visibility and an all-new design.The third and final video will

offer an inside look at JCB’s inno-vative approach to product design.It will be released on JCB’sYouTube page following the sec-ond video.

Key Features of the New Generation ofCompact Excavators

JCB’s 67C-1, 86C-1 and 85Z-1feature an all-new H-design under-carriage, robust steel body panels,spacious cabs and Tier IV finalengines that deliver increased fuelefficiency and lower operatingcosts. Powered by JCB by Kohlerdiesel engines, they provide 10

percent less fuel consumption andmeet EPA Tier IV Final emissionsstandards without the need for adiesel particulate filter.The compact excavators include

JCB’s 2Go hydraulic safety sys-tem, requiring the operator to acti-vate the hydraulic system througha button on the right-hand con-soles, therefore reducing thechance of operators working thehydraulic levers outside of the cab.Operators also must be seated witha seat belt to activate thehydraulics. A six percent roomier cab not

only offers more space and opera-tor comfort, but also provides 11percent more visibility, furtherincreasing safety. An updated heat-ing and ventilation system andoptional air conditioning improves

airflow throughout the cab,improving comfort year round.The cab also tilts to 30 degrees foreasier servicing.Each of the three machines fea-

tures a sturdy kingpost design withwidely spaced bearings to preventwear. Additionally, the excavatorsuse a new graphite-based pin andbush design, delivering 500-hourgreasing intervals for reduced dailymaintenance and lower operatingcosts. The digging equipment hasindividual hydraulic piping forsimplified maintenance and hosereplacement.For more information, visit

www.jcb.com.(This story also can be found on

Construction Equipment Guide’s

Web site at www.constructionequip-

mentguide.com.)

With a maximum operating weight of 7,782 lbs. (3,530 kg), the 303E CR expandsthe Cat mini-excavator line and gives buyers more choice in the 2.75 to 3.85 ton(2.5 to 3.5 t) size class.

• December 27, 2014 • www.constructionequipmentguide.com • Mini & Compact Equipment Section • Construction Equipment Guide

Bobcat T450 Features Tier IV Non-DPF Emissions SolutionDue to popular demand

for a compact track loaderin the 400 frame size,Bobcat Company hasintroduced the new T450.The Bobcat T450 reintro-duces a compact trackloader platform size thathas not been availablefrom Bobcat Company inrecent years. In addition toM-Series enhancementsand engine innovations, theT450 features more horse-power, higher auxiliarypressures, lower groundpressure and increasedtravel speed whenequipped with the optionaltwo-speed drive system.With a width of just 56

in. (142 cm) when pairedwith a bucket, the T450 iswell-suited for accessingand working in tight jobsites, often replacing taskspreviously done with man-ual labor and tools. Themachine’s rubber trackundercarriage minimizesground disturbance — just 4.7 pounds persquare inch — to established surfaces forfewer repairs when a project is complete.The T450 loader features a radius lift

path, providing operators with good reachand visibility. An optional enclosed cab withheat and air conditioning is available forimproved operator comfort. Air condition-ing is a new option for this size of Bobcatcompact track loaders. Also available for thefirst time in a Bobcat compact track loaderthis size, a two-speed drive system providesfaster travel when desired — with a maxi-mum speed of 7.3 mph in low range and 11mph in high range.The T450 joins the M-Series compact

track loader line, which includes the T550,T590, T630, T650, T750, T770 and T870compact track loaders. All M-Series loadersshare features such as improved power andperformance, good all-around visibility andoutstanding operator comfort.

Multiple Engine AdvancementsThe 2.4-L Bobcat engine in the T450 fea-

tures a non-diesel particulate filter (non-DPF) engine solution. The Tier IV non-DPFsolution was achieved by designing an ultra-low particulate combustion (ULPC) engine.A specially designed engine combustionchamber significantly reduces the amountsof particulate matter. Therefore, Tier IVemissions compliance can be achievedwithout using a DPF. In addition to elimi-nating the need for a DPF, the new engine

used in the T450 compact track loader hasmore horsepower and increased torque.This increase is produced over a wide rangeof engine rpm, allowing operators of all skilllevels to better utilize the machines’ maxi-mum performance.For more than a decade, Bobcat loaders

have been equipped with standard machineshutdown protection that monitors engineand hydraulic functions. Bobcat Companycontinues to improve these investment-sav-ing features for its customers. Prior to thenew Bobcat engine, engine coolant andhydraulic oil temperatures were monitored.If these functions fell outside of their normaloperating ranges, the system alerted theoperator and shut down the machine to pre-vent catastrophic damage.With the new Bobcat engines, machine

shutdown is still included when needed.However, instead of shutdown being theonly solution, the system monitors coolantand oil temperatures and manages theengine to prevent them from reaching apoint where the machine must be shutdown. This helps to prevent engine damage,minimizes engine wear and keeps operatorsworking.Another new feature of the Bobcat com-

pact track loader line is cold weather pro-tection. Anytime the engine temperature istoo low, the loader will temporarily limit themaximum engine speed (rpm) to preventpremature component wear or failure.Engine idle speed also is raised slightly to

help the engine reach its operating tempera-ture faster. As soon as the engine warms upto a predetermined temperature, the protec-tion mechanism will deactivate.

Improved PerformanceThe Bobcat T450 has increased hydraulic

performance, enabling it to efficientlyaccomplish more work. The hydraulic sys-tems on M-Series loaders have beendesigned for higher pressure — 3,300 psi —which provides increased attachment per-formance.Hydraulic flow and engine horsepower

are matched to the loader’s rated operatingcapacity, size and weight — producing aloader that can outperform higher-horse-power compact loaders. The T450 is a 61-hp machine — which represents a 25 per-cent increase in horsepower over the loaderit replaces. The T450 also stands out fromother loader brands with its faster dump androllback cycle times and higher lift and tiltcylinder forces, according to the manufac-turer.

Cab InnovationsThe T450 features a cab-forward design

that moves the operator closer to the attach-ment and provides enhanced visibility in alldirections. The new loader has the largestcab door opening on the market for easyentry and exit, offering added visibility tothe cutting edge of the bucket and the cor-ners of an attachment.

Windows on the sidesand rear of the cab are larg-er to provide more visibili-ty to the tracks and back ofthe machine. The larger topwindow makes it easier andmore comfortable for theoperator to see an attach-ment with the lift armsraised, an advantage whenloading trucks or perform-ing other tasks.An optional deluxe

instrumentation panelmonitors key loader func-tions — including fuel con-sumption — and the key-less start helps preventequipment theft. The 5-in.,full-color LCD screenoffers better readability andoperator interaction. Easy-to-read virtual sweepgauges allow operators toquickly read and under-stand the machine’s per-formance.T450 owners may

choose between standardfoot pedal and hand lever

controls, the advanced control system(ACS) or the optional selectable joystickcontrols (SJC).

Increased UptimeUptime protections on the new loader are

similar to other M-Series models: efficientmachine cooling; solid steel tailgate; andimproved tie downs. A specially designedrear bumper extends past the tailgate to pro-tect the T450 from obstacles — and relatedscrapes and bumps — on the work site. TheT450 is designed to work long hours ondemanding job sites with minimal timeneeded for routine maintenance. Simplechecks and superior design make it easier toaccess systems and perform maintenancecorrectly at the proper intervals.The T450 also features the hydraulically

powered Bobcat SmartFAN. The coolingsystem draws cool, clean air from above anddirects it out through two side vents. Theradiator and hydraulic oil cooler are locatedabove the engine, well-protected betweenthe frame uprights yet easily maintained.An open undercarriage design, constant

tension drive belt, protected quick coupler,and improved tie downs also are new fea-tures to help increase uptime protectionwhen operating the T450.For more information, visit

www.bobcat.com.(This story also can be found on



With a width of just 56 in. (142 cm) when paired with a bucket, the T450 is well-suited for accessing and workingin tight job sites, often replacing tasks previously done with manual labor and tools.


3617

Tier 4 | ECOMAX ENGINENEW

DESIGNED WITHOUT COMPROMISE.What does JCB’s Tier 4 Solution Mean to You?

CONTACT YOUR JCB DEALER FOR MORE INFORMATION.

• No after treatment

• 10% better fuel economy

• No DPF to service

• No regeneration

• Can use regular grade oil

• No bulky add-ons

• Better torque at lower revs

• Lower service costs

Dallas, TX214-819-3991Longview, TX800-245-7702Waco, TX800-245-7706Texarkana, TX888-327-7370

Tulsa, OK866-402-4248Oklahoma City, OK409-898-8700

www.darrjcb.com

Lubbock, TX806-745-2000Wichita Falls, TX940-687-2726Odessa, TX432-337-2823Amarillo, TX806-372-8386

Midland, TX432-685-9999Clovis, NM575-742-2726

www.ascoeq.com

San Antonio, TX210-662-9701

www.jcbofsouthtexas.com

Houston, TX713-692-4471Beaumont, TX409-898-8700

www.adobejcb.com

DARR ADOBE

2240 W. Buckeye Rd.Phoenix, AZ 85009602-761-2525Fax: 602-454-8899

www.flaskajcb.com


John Deere compact excavatorswork their little tails off — so youdon’t have to. Zero and reduced-tail-swing designs allow them torotate fully without banging intoanything. Independent-swing boomand 360-degree rotation provide theextra maneuverability you need towork more productively within tightlot lines and setbacks. Standardmechanical quick-coupler and auxiliaryhydraulics allow you to hook up torakes, breakers, and augers formaximum versatility. Opt for abucket with a thumb to handle largematerials.

Whether you’re digging retainingwalls or trenches for drainage orseptic systems, a Deere compactexcavator will fit right in.

Contact us today.

Flagstaff5500 East Penstock AveFlagstaff, AZ 86004

928-526-0639

Phoenix2649 N 29 Ave

Phoenix, AZ 85009602-415-4700

Prescott1091 Commerce DrivePrescott, AZ 86035928-776-8300

Tucson5051 S Outlet Center

DriveTucson, AZ 85706520-294-5262

Lakeside10108 Riverford RoadLakeside, CA 92040

619-443-3758

Riverside20 Iowa Avenue

Riverside, CA 92507951-778-3700

Indio83-300 Avenue 45Indio, CA 92201760-342-8900

Imperial3275 Hwy 86

Imperial, CA 92251760-355-4331

Irving3230 East Airport

FreewayIrving, TX 75062972-438-4699

Fort Worth5301 Mark IV ParkwayFort Worth, TX 76131

817-232-8094

Hewitt215 Enterprise BlvdHewitt, TX 76673254-666-3900

Pflugerville16415 N IH-35

Pflugerville, TX 78660512-272-4141

New Braunfels19275 N IH-35

New Braunfels, TX78132

830-632-3100

Laredo102 Wilcox RoadLaredo, TX 78043956-718-1909

PAPE MACHINERYwww.papemachinery.com

RDO EQUIPMENT CO.www.rdoequipment.com

Newark800-231-2060510-790-3600

Fax: 510-790-9120

Sacramento800-227-3399916-922-7181

Fax: 916-922-4532

French Camp800-619-6319209-983-8122

Fax: 209-983-1105

Fowler559-834-4774

Fax: 559-834-4754

Rohnert Park800-325-9401707-584-9161

Fax: 707-584-4786

Gilroy800-848-4150408-848-4150

Fax: 408-848-5163

Redding530-241-4555

Fax: 530-241-0619

HONNEN EQUIPMENT CO.www.honnen.com

5055 E. 72nd Ave.Commerce City, CO

303-287-7506800-646-6636

Durango, CO970-247-4460

Grand Junction, CO970-243-7090

Ogden, UT801-627-0049

Salt Lake City, UT801-262-7441

St. George, UT435-652-8003

Casper, WY307-266-4474

Gillette, WY307-685-4288

Rock Springs, WY307-382-5284

Idaho Falls, ID208-523-9915

4 RIVERS EQUIPMENTwww.4riversequipment.com

Albuquerque, NM2301 Candelaria Rd. NE

505-884-2900

Colorado Springs, CO1100 E. Cheyenne Rd.

719-475-1100

El Paso, TX11323 Rojas Drive915-598-1133

Farmington, NM1100 Troy King Rd.505-326-1101

Fort Collins, CO125 John Deere Dr.970-482-7154

Frederick, CO3763 Monarch St.303-833-5900

Hobbs, NM2400 W. Bender Blvd.

575-392-6923

Pueblo West, CO685 Enterprise Drive

719-547-3505


We’ve got you covered

Scan for Free Demo

jobsite tough

APCO Equipment Corp.

3432 N. 5th StreetNorth Las Vegas, NV 89032

702-871-7474Fax: 702-368-0871

www.apcoequipment.com

A-Z Equipment Rentals & Saleswww.a-zequipment.com

East Valley/Gilbert1313 E. Baseline Rd.Gilbert, AZ 85233

480-539-8700

North Phoenix602-992-1150

West Valley623-925-0200

Central Phoenix602-955-5100

Rifle Equipment, Inc.1605 Airport Rd.Rifle, CO 81650970-625-2580

TF: 866-427-7970www.rifleequipment.com

Barnsco, Inc.2609 Willowbrook Rd.

P.O. Box 541087Dallas, TX 75220

214-352-9091

Hutto, TX512-354-4970

Fort Worth, TX817-740-2400

Walled Lake, MI248-668-1010

www.barnsco.com

RGW Equipment550 Greenville Rd.

Livermore, CA 94450925-606-2450

Fax: 925-606-2492www.rgwequipment.com


SEE WHO WINS GOING HEAD-TO- HEAD.Do you want to see how compact track loaders perform in head-to-head competitions or watch side-by-side comparisons relating to performance, serviceability and durability? Before you buy your next loader, watch our video comparisons of compact track loaders. Not only do the videos show you which loader is best, they explain the small details that increase your performance and reduce your downtime. You can watch all the videos at BobcatAdvantage.com/CTLFaceOff11 and find out who comes out on top.

CALIFORNIA

COLORADO

OKLAHOMA

TEXAS

UTAH

Bobcat® and the Bobcat logo are registered trademarks of Bobcat Company in the United States and various other countries. ©2014 Bobcat Company. All Rights Reserved. | 1114251

BobcatAdvantage.com/CTLFaceOff11

ONE VS MANYCOMPACT TRACK LOADERS FACE OFF.

oc.ypplusonsrvees.www14894-28-079

gairC Co.yy Co.lppu SnosreveS

DOAROLCOo.csotirrecfotacbo.bwww

2423-269-265soritrCe

In,sotirr Ceff Ce ott ocabBoAINROIFLAC

-5873-09vgnoL 8 •0000-685-964vsiweL-456-718

WtorFf ott ocabBo

tcidyelalv.www 8 •95-39488-163 CsuproCr Coff Co otcabBo

mo

c. In Co.

mo

c. In

bo BdzeirohtAu

9

wedLuq.www21SacboBb.www7

obB

7455-wie

5900-189-66 8eillv0222-htor

sall Dafmoc.htciwh

391-365-388 8tiisrh C

itisr Chss Chupr

sreal Detacb

1536-838-309anakarxeT

yrenicha Mllewte.noctnempuiqyetilau

6361-373-021oinotnn AaS

oinotnn Aaf St oamoc.ontsuohfotacbob

0022-134-137dnlaareP

ontsou Hff H ott oacob

octnempuiqyetilauq.www5413-512-251

intsuAnitsuf At oacboB

SATEX.yrehincamratsethiw.www

7877-226-189aslTu

enihcar Mate StihWAMHOALOK

hfotacbob.www 888 •8486-774-182

VyesreJ-0986-93oernoC

Hff H ott oacobBtcidyelalv.www5-24-569nilraH Hff Ha ott ocabBo

fotacbo.bwww5873-09

te.no

n

moc

yre

ww-262-108eWmoretIn

el.www

moc.ontsuoh9664-166- 888

egaill V0976-

oeontsou H

moc.htciwh00345-

gennegnilr Ha

mo.csalladf7455

mo.ctacboimb.ww0463-055- 888 •8020-

ytiy Cellat Vsetcab Boniatnumo

HTAUmoc.yrehincamllewde

Ditch Witch’sSK850 AcceptsMany Attachments

The Ditch Witch organization’s SK850 is equipped with a37-hp (27.6-kW), Tier IV Yanmar diesel engine. The engineprovides outstanding power for all machine functions anddirects more power to the attachment than other models, soattachments are more productive. The SK850 accepts dozensof attachments for a wide range of utility, landscaping,plumbing and other underground construction tasks.The Ditch Witch organization firmly believes that a more

comfortable operator is a more productive operator, and theSK850 embodies this philosophy. Its 74-sq.-in. (188-sq cm)platform is larger and higher, giving the operator increasedcomfort and stability while keeping him above the work site.The ergonomic operator’s station has been updated withnew, customer-requested features, for optimized comfort andefficiency. Dual-lever ground drive controls come standard,with an optional single-lever joystick available. An auxiliarycontrol foot pedal helps operators maintain hydraulic flow tothe attachment while freeing their hands to control depth andground speed. The SK850’s high-drive track system has bolt-on sprock-

ets that can be interchanged — an exclusive Ditch Witch fea-ture — to provide longer-lasting performance. The track sys-tem also has a low-maintenance track-tensioning systemwith a grease cylinder for easy adjustment and track removal,which helps in-crease track life and reduce downtime. TheSK850 comes with the customer’s choice of 42-in. (107 cm)or 36-in. (91 cm) wide tracks.With its 860-lb. (390 kg) rated operating capacity and 83-

inch. (2.1 cm) hinge-pin height, the SK850 is engineered forproductive loading. The SK850 is construction-grade, builtwith reinforced steel that can withstand the rigors of the jobsite. And its belt-free design helps minimize maintenanceand increase up-time.Another standard feature that improves both operational

efficiency and operator safety is the auto-throttle function.When enabled, the auto-throttle automatically reducesengine RPMs when hydraulic functions are not in use. Theengine returns to the operator-set engine RPM when anyhydraulic function is engaged, improving overall fuel effi-ciency, according to the manufacturer.For more information, call 800/654-6481 or visit

www.ditchwitch.com.(This story also can be found on Construction Equipment

Guide’s Web site at www.constructionequipmentguide.com.)

The Ditch Witch SK850 is equipped with a 37-hp (27.6-kW), Tier IV Yanmar diesel engine.


DEALER IMPRINT AREA

>

>

>

AN E.P.I.C. GENERATIONEFFICIENT

POWERFUL

INTELLIGENT

COMFORTABLE

DEALER IMPRINT AREA

DEALER IMPRINT AREA

Alaska

YUKON EQUIPMENT

Anchorage (888) 488-2616Fairbanks (907) 457-1541

Arizona

BEJAC CORPORATION

Glendale (Phoenix) (800) 772-3522TUCSON TRACTOR CO.

Tucson (520) 623-5848

California

BEJAC CORPORATION

Anderson (Redding) (800) 772-3522Placentia (Los Angeles) (800) 772-3522Sacramento (800) 772-3522San Leandro (San Francisco) (800) 772-3522

CEN-CAL MACHINERY CO. INC.

Fresno (559) 233-3836GARTON TRACTOR, INC.

Modesto (209) 538-0911Newman (209) 862-3760Stockton (209) 948-5401Turlock (209) 632-3931

TRI-WEST TRACTOR, INC.

Livermore (925) 455-8200

Colorado

RIVERBEND MACHINERY, INC.

Grand Junction (970) 245-1250Louviers (303) 470-3023

Idaho

CENTRAL EQUIPMENT CO.

Pocatello (208) 233-2850

Nevada

APCO EQUIPMENT

Las Vegas (702) 871-7474SHAFER EQUIPMENT COMPANY, INC.

Reno (775) 331-7772

New Mexico

ASSOCIATED SUPPLY CO.

Clovis (575) 742-2726CENTURY EQUIPMENT COMPANY INC

Albuquerque (505) 433-2246

Oklahoma

OKLAHOMA TERRITORY CONSTRUCTION EQUIP.

Oklahoma City (405) 917-9191Tulsa (918) 835-7200

Oregon

SS EQUIPMENT

Hermiston (541) 567-3001La Grande (541) 963-8144

TRIAD MACHINERY, INC.

Coburg (Eugene) (541) 342-7700Portland (503) 254-5100Prineville (541) 447-5293

Texas

ABILENE NEW HOLLAND, LTD.

Abilene (325) 675-0602AMARILLO MACHINERY

Amarillo (806) 372-7800B C EQUIPMENT SALES, INC.

Corpus Christi (361) 289-9314La Feria (956) 797-0072San Antonio (210) 447-9314

BANE MACHINERY, INC.

Dallas (214) 352-2468Fort Worth (817) 847-5894Tyler (800) 594-2200

CLM EQUIPMENT CO., INC.

Houston (281) 598-2500

Utah

RASMUSSEN EQUIPMENT

Salt Lake City (801) 972-5588

Washington

SS EQUIPMENT

Moses Lake (509) 764-8447Othello (509) 488-9606Pasco (509) 547-1795Quincy (509) 787-3595Sunnyside (509) 836-0602Walla Walla (509) 522-9800

TRIAD MACHINERY, INC.

Spokane (800) 945-9168Tacoma (800) 622-8876

Wyoming

M&N FIELD SERVICES

Boulder (307) 537-5001Casper (307) 537-5001

WOODWARD TRACTOR & RENTALS, INC.

Cody (307) 587-6812


ALLU’s DL Screening Buckets Extend Range to CompactsALLU Group Inc.’s DL screening buckets are designed

specifically for use with compact base machines such asmini-excavators, small wheel loaders, skid steers and back-hoes. One bucket allows you to change screen sizes ranging

from 5/8, 1 ¼

and 2 in. (1.6, 3.2 and 5 cm) just by changing out the screenand hammers. The DL screening bucket is the perfect toolfor landscapers and is engineered to screen, mix, aerate andload top soil, peat and compost.

The core of the new DL screening bucket is the unique topscreen where the screening hammers spin between the

screen comb. This design makes the buckets clog-free,ensuring good production and throughput even with

wet materials. Additionally, the new DL screeningbucket doesn’t require a case drain line for oper-

ation making the bucket as simple as attachand start screening.

To ensure maximum performance and durability, thebucket’s frame was designed and modeled using finite ele-ment analysis (FEA) engineering. The material weight iscarried by the top screen comb so the drums and bearingshave less impact under the load. The screening blades andtop screen comb are changeable when worn or when chang-ing size adjustments, which helps keep operating costs low.

The buckets are available in three models — the DL 2-09,DL 2-12 and DL 2-17. The DL 2-09 is the smallest of theseries and is recommended for use with mini-excavatorsweighing 8,800 to 26,000 lbs. (3,991 to 11,793 kg) and smallwheel loaders weighing 4,400 to 17,600 lbs. (1,996 to 7,983kg). The bucket is 43 in. wide, 35 in. high and 37 in. (109 by89 by 94 cm) deep and weighs 947 lbs. (429.5 kg).

The DL 2-12 bucket is recommended for compact exca-vators weighing 15,400 to 26,000 lbs. (6,985 to 11,793 kg)and for small wheel loaders weighing 6,600 to 17,600 lbs.(2,993 to 7,983 kg). The bucket is 56 in. wide, 35 in. highand 37 in. (142 by 89 by 94 cm) deep and weighs 1,190 lbs.(540 kg).

The DL 2-17 bucket is the largest bucket in the series andis recommended for use with compact excavators weighing19,800 to 26,000 lbs. (8,981 to 11,793 kg) and for smallwheel loaders weighing 8,800 to 17,600 lbs. (3,991 to 7,983kg). The bucket is 74 in. wide, 35 in. high and 37 in. (188 by89 by 94 cm) deep and weighs 1,532 lbs. (695 kg).

For more information, call 800/939-2558 or visitwww.allu.net.

(This story also can be found on Construction EquipmentGuide’s Web site at www.constructionequipmentguide.com.)

ALLU Group Inc.’s DL screeningbuckets are designed specificallyfor use with compact basemachines such as mini-excavators,small wheel loaders, skid steersand backhoes.

Wacker Neuson’s 803 Can Operate With Zero EmissionsWacker Neuson has introduced a 1-ton (.9

t) excavator that can run off diesel or electricpower. The 803 dual power mini-excavatorruns off a standard diesel engine or can eas-ily be connected to an electro-hydraulicpump — allowing the machine to operateemission-free. This solution is perfect forinterior excavating and demolition, and isunique in that the operator can choosebetween diesel and electric power on thesame machine depending on the application,according to the manufacturer.

The 803 dual power mini-excavator issmall in size, but big in performance andversatility.

The new 803 dual power features a dedi-cated connection in the undercarriage wherethe electro-hydraulic pump, HPU8, attachesto the excavator. For convenience, long 39 ft.(12 m) hoses connect the HPU8 and the 803undercarriage, allowing the mini-excavatorto still rotate 360-degrees. Accessibility onthe job is easy since it is narrow enough to fitthrough standard interior doors.

The HPU8 electro-hydraulic pump wasspecifically developed by Wacker Neuson,ensuring that no matter which powersource is used, the 803 delivers the samepowerful, consistent performance. In theconventional operation, the 803 is powered

by a 13-hp diesel engine, which providesthe small excavator enough power forbreaking applications. When connected tothe HPU8 electo-hydraulic pump, the 803runs emissions-free with the same best inclass performance.

Wacker Neuson’s new 803 dual powermini-excavator features a telescopic under-carriage that can extend from 27.5 to 34-in.(70 to 86 cm) for greater stability and liftingpower. The dimensions of the HPU8 wereoptimized for the 803, and it can be lifted

and transported on the excavator’s dozerblade for easy transport, or can be moved viathe jobsite-ready wheels or lift hook.




The 803 dual power mini-excavator runs off a stan-dard diesel engine or can easily be connected to anelectro-hydraulic pump — allowing the machine to

operate emission-free.


FIND OUT WHAT OTHERS KNOW. VISIT TAKEUCHI-US.COM TO FIND THE DEALER NEAREST YOU.

EXPERIENCE THE DIFFERENCETakeuchi o�ers the most innovative and advanced line of compact equipment on the planet. Come and see what everyone else is talking about. Experience Takeuchi — Visit your local dealer today.

ERIEPEX

I DEH TECNE

ECNREFFE

ERIEPEXhs tre�i ohcuekaT

e amo. Ctenale phte dlaoc lrou ysitiV

I DEH TECNEdd ane avitavonnt isoe me isle enoyrevt eahe wed sn

.yado tlerae

ECNREFFEt ecapmof ce ond liecnavd

. tuobg aniklas te i eirpexE

nt onempiuqt e —hiuceka T Taenc

F

S KREHTT OAHT WUD ONIF

T ISI. VWONS K HUCEKAT

OMC.SU-I E DHD TNIO F T

.UOT YSERAER NELAEE D

DENVERHEADQUARTERS5000 Vasquez Blvd.Denver, CO 80216

888-271-3308

Colorado Springs888-271-3308

Grand Junction888-271-3308

Milliken888-271-3308

Durango888-271-3308

Cheyenne888-271-3308

POWER MOTIVECORPORATIONwww.powermotivecorp.com

DITCH WITCH OF EAST TEXAS

www.witchequipment.net7809 Hwy. 271Tyler, TX 75708903-592-6226

Fax: 903-535-9768

DITCH WITCH OF ARIZONAwww.ditchwitchaz.com

4028 S. 36th St.Phoenix, AZ 85040

602-437-0351

Tucson, AZ520-579-0261

12320 South Main St.

Houston, TX 77035713-551-0506

Fax: 713-551-0798

Tomball, TX281-351-9016

Corpus Christi, TX361-884-8275


Beaumont, TX409-721-5305

Edinburg, TX956-386-0107

Austin, TX512-251-0013

Buffalo, TX903-322-7150

WAUKESHA-PEARCE INDUSTRIES, INC.

www.wpi.com

TRI-WEST TRACTOR

www.tri-westtractor.com6281 Southfront RoadLivermore, CA 94450

925-455-8200Fax: 925-455-8220


Case Introduces Tier IV Final TR310 Alpha Series CTLCase Construction Equipment’s Tier IV

Final TR310 Alpha Series compact trackloader (CTL) features wider tracks (15.75 in.[40 cm]), a greater overall width (74.3 in.[188.7 cm]) and lower ground pressure (5.0psi) than other medium-frame CTLs in theCase lineup. These features provide greaterpower, stability and flotation forowners/operators who need that perform-ance without upgrading to a large-framemachine, according to the manufacturer.The new TR310 weighs in at 8,800 lbs.

(3,991 kg) with a rated operating capacity of3,100 lbs. (1,406 kg) and a bucket breakoutforce of 8,680 lbs. The machine’s 74 hp, 232ft.-lbs. of torque and increased hydraulicflow (standard: 24.2 gpm [91.6 Lpm]; high-flow: 32.4 gpm [122.6 Lpm]) make it idealfor landscaping, residential construction andagricultural applications. The radial-lift armdesign is ideal for digging and pushing appli-cations, and the machine’s hinge-pin height(10 ft., 3 in. [3.1 m]) is excellent for loadingand unloading trucks. It also features a 19.5-gal. (73.9 L) fuel tank, which extends run-times and ensures that the machine can workthe entire day without refueling.

Maintenance-Free Tier IV Final Solution

The TR310 features a cooled exhaust gasrecirculation (CEGR) engine with a particu-late matter catalyst, which is made up of adiesel oxidation catalyst (DOC) and a high-efficiency flow-through filter. The DOCconverts emissions into neutral gasses. Theremaining particulate matter then passesthrough to the filter where it is slowed andburned. This solution is efficient and mainte-nance free as it does not require filterreplacement.

EZ-EH Controls Provide FlexibilityThe TR310 offers an EZ-EH (electro-

hydraulic) setup menu that features nineoptimal preset speed and control settings.This allows the operator to match controls totheir preference for greater confidence andproductivity. A single rocker switch allowsoperators to switch between the Case “H”operating pattern and ISO pattern controls,

and new handles with Case-exclusivedetents that allow the operator to physicallyfeel when the joystick is coming out of neu-tral.

Dozer-Style Undercarriage OffersStability and Performance

All Case Alpha Series compact track load-ers feature a dozer-style undercarriage,designed for stability on steep slopes and

excellent performance in muddy and sandyterrain. The rigid track frame features fewermoving parts than suspension track systems,making it more durable and easier to main-tain. The TR310 also features push-buttonride control as an option, which dampensloader arm movement while traveling for asmoother ride with greater material reten-tion.

Comfort for the OperatorThe TR310 offers one of the widest cabs

in the industry at nearly 3 ft. (.9 m) wide. Itfeatures an enclosed cab that is fully sealedand pressurized against noise and dust. Italso features the industry’s lowest entrythreshold, which makes it easy for the oper-ator to get in and out of the cab. The cab-for-ward design provides best-in-class visibilitywith excellent site lines down to the bucketedge, curb lines and to the rear of themachine. Ultra-narrow wire side screens, alarge and curved rear window, side lightingand a skylight further improve visibility,according to the manufacturer.

Easy to Use and MaintainThe engine, filters and fill points are all

located at the rear of the machine for quickand easy access. The TR310 features Case’seasy-tilt cab for convenient access to the dri-vetrain compartment. Hydraulic quick cou-plers allow operators to quickly changeattachments from the cab, while connectunder pressure (CUP) manifolds require notools to connect or disconnect hydrauliclines. For more information, visit

www.CaseCE.com.(This story also can be found on



The new TR310 weighs in at 8,800 lbs. (3,991 kg) with a rated operating capacityof 3,100 lbs. (1,406 kg) and a bucket breakout force of 8,680 lbs.

Takeuchi Launches TL8 Tier IV Compact Track Loader Takeuchi-US has expanded its

line of compact track loaders withthe introduction of the TL8.Designed and engineered to pro-vide superior power, strength, andmaneuverability the TL8 replacesthe TL230 Series 2. This newaddition to the Takeuchi trackloader line-up features a radial liftloader design, weighs approximate-ly 8,345 lbs. (3,785 kg), and has atip load of 6,020 lbs. (2,730 kg).The TL8 is powered by a 74.3

hp turbocharged engine that meetsEPA Final Tier IV emissions stan-dards. With a high pressure com-mon rail injection system, diesel

oxidation catalyst (DOC), anddiesel particulate filter (DPF),emissions are minimized for cleanand efficient operation.Double reduction planetary

drives provide traction forces ofmore than 9,100 lbs., and whencombined with bucket breakoutforces exceeding 6,800 lbs., andloader lift arm forces of more than6,700 lbs., the TL8 is able to deliv-er unmatched performance in themost demanding applications,according to the manufacturer.Rated operating capacity (ROC)

has been increased by more than13 percent on the TL8 to an

impressive 2,105 lbs. (955 kg), andcan be boosted by more than 10percent by adding optional rearcounterweights.Inside the operator’s station is an

LCD monitor panel and switchbank that helps improve perform-ance and functionality by provid-ing the operator with a wider rangeof operational information. Theoperator’s station offers low-effortpilot controls and proportionalauxiliary switches to give the oper-ator the precision needed to workmore efficiently in a comfortable,fatigue-free environment. Featuring an LCD multi-infor-

mation display and switch bank,the functionality of the TL8 hasbeen greatly improved.Additionally, a deluxe high backsuspension seat is standard equip-ment and features weight andheight adjustments for outstandingcomfort and visibility.An available option is a new

pressurized cab that deliversimproved operator comfort andHVAC performance, and includesa roll-up door that can be openedregardless of the position of loaderarms or attachment.“Takeuchi is excited to intro-

duce the TL8 track loader to our

product portfolio, built forstrength, performance, maneuver-ability and rugged versatility inharsh environments,” said ClayEubanks, president of Takeuchi-US. “With the new LCD monitorpanel and advanced controls, oper-ators will have everything theyneed at the palm of their hand tomake the job as efficient and com-fortable as possible.”For more information, visit

www.takeuchi-us.com.(This story also can be found on



mentguide.com.)


© 2014 Yanmar America Corp.

RESPECTFULLY DISREGARDS CONVENTIONAL EXCAVATOR WISDOM.Plenty of people make compact excavators. But none can say they engineered the first mini-excavator, zero tail swing excavator, swing-boom excavator and rubber-tracked excavator. At Yanmar, we simply can’t stop innovating. That’s why our nine excavators – seven with true zero tail swing – are each purpose-built to overcome the most challenging conditions, work with unparalleled power and conserve fuel. So, if you just want to play around on your jobsite, go get any old excavator. BUT IF YOU’D RATHER RULE YOUR JOBSITE, GET A YANMAR.

RuleTheJobsite.com

Corp.anmar America 2014 Y Yanmar America ©

Alamo, TX956-782-5580

Amarillo, TX806-622-2407

Corpus Christi, TX361-887-8499

Denham Springs, LA 225-665-7900

Waco (Ross), TX254-829-9655

Irving, TX 972-255-3500

Houston (Cypress), TX281-671-6000

Kilgore, TX 903-988-9868

Lubbock, TX 806-745-1245

Round Rock, TX 512-244-0505


Ditch Witch of Oklahoma/TulsaEdmond, OK 73034

405-348-4633

Tulsa, OK 74116918-438-1560

RGW Equipment Saleswww.rgwequipmentsales.com

550 Greenville RoadLivermore, CA 94550

925-606-2456925-606-2492 Fax

Vermeer of Texas-Louisianawww.vermeertexas.com


r ce oued snn ap iotS

e Ereen Dhof Jne oie ltplemor c

K40d 2ns, areetd Siks SeireSe E

t capmoJ C44d 2n, aK40, 3K

nod sns, amoorle bgnaetcurtsbnoy ullautrivs smeoh cca. EsredaoL

r ce oued snn ap iotS

od blns, aedas, blrhesuw pno. Aedisnhe im tory ftilibisid ved cetat heeiuh qtid wradnats s

e Ereen Dhof Jne oie ltplemor c

e a wdivore p, wllf at ose. Bsrewh outid weppiuqe en bal cld an. Ahe oun tr oetnip weet kahs tbad c

K40d 2ns, areetd Siks SeireS-e E

o s tecrousef rh otlaee a ws, tekcu™ bore Ptiskror Wh ou

g nireville deihe wdisthe out capmoJ C44d 2n, aK40, 3K

Irving, TX972/438-4699

Fort Worth, TX817/566-1541

Hewitt, TX254/666-3900

Pflugerville, TX512/272-4141

New Braunfels, TX830/632-3100

Laredo, TX956/718-1909

Flagstaff, AZ928/526-0639

Phoenix, AZ602/415-4700

Prescott, AZ928/776-8300

Tucson, AZ520/294-5262

Lakeside, CA619/370-4300

Riverside, CA951/778-3700

Indio, CA760/342-8900

Imperial, CA760/355-4331

PO Box 31388Amarillo TX 79120806/335-1681

806/335-3932 Fax

Lubbock TX806/763-0473

Odessa TX432/580-3337

Abilene TX 325/677-2291

San Angelo TX325/651-3337

Wichita Falls, TX940/322-3337

Enid OK580/233-5000

Tulsa OK918/245-5926

McAlester OK918/423-2555

Albuquerque, NM2301 Candelaria Rd.

NE505/884-2900

Colorado Springs, CO1100 E. Cheyenne Rd.

719/475-1100

El Paso, TX11323 Rojas Drive915/598-1133

Farmington, NM1100 Troy King Rd.

505/326-1101

Fort Collins, CO125 John Deere Dr.970/482-7154

Frederick, CO3763 Monarch St.303/833-5900

Hobbs, NM2400 W. Bender Blvd.

575/392-6923

Pueblo West, CO685 E. Enterprise Dr.

710/547-3505


4 RIVERS EQUIPMENTwww.4riversequipment.com

YELLOWHOUSE MACHINERY CO.www.yellowhouse.us

• December 27, 2014 • www.constructionequipmentguide.com • Mini & Compact Equipment Section • Construction Equipment Guide Construction Equipment Guide • Mini & Compact Equipment Section • www.constructionequipmentguide.com • December 27, 2014 • Page 31

Nothing Performs Like Ditch Witch Equipment. Except Perhaps Your Dealers.The �nest light construction equipment deserves the best support. That’s just what you’ll �nd at your local

Ditch Witch® dealer. Factory-trained service technicians. Expert advice. Answers to all of your questions.

Overnight shipment of parts to just about anywhere. And, of course, the leading underground construction

equipment in the world. Your Ditch Witch dealer will help you get the most out of your equipment. To �nd one

near you, visit ditchwitch.com.

©2010 The Charles Machine Works, Inc.

Witch Equipment Company, Inc. Fort Worth, TX | 817-429-4824

Witch Equipment Company, Inc. Hewitt, TX | 254-666-3344

Ditch Witch of New Mexico, Inc. Albuquerque, NM | 505-345-1888

Ditch Witch of Houston Houston, TX | 713-462-8866

Ditch Witch of East Texas Tyler, TX | 903-592-6226

Ditch Witch Southwest Lubbock, TX | 806-745-6866

Ditch Witch of Oklahoma Edmond, OK | 405-348-4633

Ditch Witch of Tulsa Tulsa, OK | 918-438-1560

Ditch Witch of Arkansas Springdale, AR | 479-419-9771

Ditch Witch of Arkansas Benton, AR | 501-316-3200

Ditch Witch of Arizona Phoenix, AZ | 602-437-0351

Ditch Witch of Southern Arizona Tucson, AZ | 520-579-0261

ditchwitch.com

Witch Equipment Co., Inc.Fort Worth, TX | 817-429-4824

Witch Equipment Co., Inc.Hewitt, TX | 254-666-3344

Ditch Witch of OklahomaEdmond, OK | 405-348-4633

Ditch Witch of New Mexico, Inc.Albuquerque, NM | 505-345-1888

Ditch Witch of East TexasTyler, TX | 903-592-6226

Ditch Witch SouthwestLubbock, TX | 806-745-6866

Odessa, TX | 432-617-8351

Ditch Witch of TulsaTulsa, OK | 918-438-1560

Ditch Witch of ArkansasSpringdale, AR | 479-419-9771

Ditch Witch of ArkansasBenton, AR | 501-316-3200

Ditch Witch of ArizonaPhoenix, AZ | 602-437-0351

Ditch Witch of Southern ArizonaTucson, AZ | 520-579-0261

Ditch Witch of HoustonHouston, TX | 713-462-8866

Ditch Witch NorthwestPortland, OR | 503-286-6400Tukwila, WA | 206-995-8420Billings, MT | 406-252-7667

• December 27, 2014 • www.constructionequipmentguide.com • Mini & Compact Equipment Section • Construction Equipment Guide Construction Equipment Guide • Mini & Compact Equipment Section • www.constructionequipmentguide.com • December 27, 2014 •

Nothing Performs Like Ditch Witch Equipment. Except Perhaps Your Dealers.The �nest light construction equipment deserves the best support. That’s just what you’ll �nd at your local

Ditch Witch® dealer. Factory-trained service technicians. Expert advice. Answers to all of your questions.

Overnight shipment of parts to just about anywhere. And, of course, the leading underground construction

equipment in the world. Your Ditch Witch dealer will help you get the most out of your equipment. To �nd one

near you, visit ditchwitch.com.

©2010 The Charles Machine Works, Inc.

Witch Equipment Company, Inc. Fort Worth, TX | 817-429-4824

Witch Equipment Company, Inc. Hewitt, TX | 254-666-3344

Ditch Witch of New Mexico, Inc. Albuquerque, NM | 505-345-1888

Ditch Witch of Houston Houston, TX | 713-462-8866

Ditch Witch of East Texas Tyler, TX | 903-592-6226

Ditch Witch Southwest Lubbock, TX | 806-745-6866

Ditch Witch of Oklahoma Edmond, OK | 405-348-4633

Ditch Witch of Tulsa Tulsa, OK | 918-438-1560

Ditch Witch of Arkansas Springdale, AR | 479-419-9771

Ditch Witch of Arkansas Benton, AR | 501-316-3200

Ditch Witch of Arizona Phoenix, AZ | 602-437-0351

Ditch Witch of Southern Arizona Tucson, AZ | 520-579-0261

ditchwitch.com

Witch Equipment Co., Inc.Fort Worth, TX | 817-429-4824

Witch Equipment Co., Inc.Hewitt, TX | 254-666-3344

Ditch Witch of OklahomaEdmond, OK | 405-348-4633

Ditch Witch of New Mexico, Inc.Albuquerque, NM | 505-345-1888

Ditch Witch of East TexasTyler, TX | 903-592-6226

Ditch Witch SouthwestLubbock, TX | 806-745-6866

Odessa, TX | 432-617-8351

Ditch Witch of TulsaTulsa, OK | 918-438-1560

Ditch Witch of ArkansasSpringdale, AR | 479-419-9771

Ditch Witch of ArkansasBenton, AR | 501-316-3200

Ditch Witch of ArizonaPhoenix, AZ | 602-437-0351

Ditch Witch of Southern ArizonaTucson, AZ | 520-579-0261

Ditch Witch of HoustonHouston, TX | 713-462-8866

Ditch Witch NorthwestPortland, OR | 503-286-6400Tukwila, WA | 206-995-8420Billings, MT | 406-252-7667


JLG G5-18A Compact Telehandler Works in Crowded AreasThe JLG G5-18A super compact telehan-

dler features a 127-in. (322.5 cm) turningradius, enabling movement through crowd-ed job sites and a stowed height of less than76 in. (193 cm), making it ideal for work inconfined or congested spaces and any appli-cation with overhead height restrictions. Themachine also offers a variety of attachmentsfor versatility in handling jobsite challenges. Redesigned in 2013 for enhanced reliabil-

ity and serviceability, the G5-18A features amaximum lift height up to 18 ft. (5.5 m), anextended outreach of 11 ft. (3.3 m), and a5,500-lb. (2,495 kg) maximum liftingcapacity. Operators also will appreciate theenhanced visibility over the engine side ofthe machine and comfortable cab, designedto reduce operator fatigue. The G5-18A also offers savings through

its Tier IV final Deutz engine, which pro-vides higher levels of fuel efficiency andreduces the impact on the environment. Inaddition, it offers an optional reversing fan,which is a benefit in dusty environments, asit allows the operator to reverse the fan to“clean out” the radiator, according to themanufacturer.




The G5-18A features a maximum lift height up to 18 ft. (5.5 m),an extended outreach of 11 ft. (3.3 m), and a 5,500-lb. (2,495kg) maximum lifting capacity.

Hyundai Presents Tier IV Final R35Z-9 Compact ExcavatorThe Hyundai R35Z-9 compact excavator

has an operating weight of 8,050 lbs. (3,650kg) and is powered by a reliable, fuel effi-cient 26.5 hp (19.8 kW) Tier IV CertifiedYanmar 3TNV88 engine. The R35Z-9boasts a dig depth of 10 ft. 4 in. (3.1 m) abucket digging force of 7,050 lbf (31.4 kN)and bucket capacity of 3.78 cu. ft. (.107 cum). The R35Z-9 offers a tail-swing radius of2 ft. 10 in. (.8 m), allowing for efficientoperation on sites where space is limited. Hyundai designed the R35Z-9’s

hydraulic system to give the user super-finetouch and top-level controllability, allowingthe excavator to be agile and accurate whileoperating in congested areas. Optimizedmatching between the joystick and maincontrol valve improves control and smooth-ness of operation. An arm flow summationsystem provides energy savings, reducedcavitation and increased speed, according tothe manufacturer. To improve safety and avoid boom drift

the R35Z-9 is equipped with an integratedboom holding system.The R35Z-9 features a fully customizable

operator’s station allowing the end-user toset their operating preferences to meet theirindividual needs. Some of these customiz-able options include an easily adjustable

seat and wrist rest settings, foldable pedalsthat provide increased floor space andergonomically located left and right controllevers for convenient access. The monitor-ing system of the R35Z-9 provides the oper-ator with machine status informationincluding engine oil pressure, batterycharge, engine coolant temperature and afuel gauge.Reliability is improved and maintenance

costs are reduced on the R35Z-9 compactexcavator. The addition of lubricated bush-ings has extended lube intervals throughoutthe attachment to 250 hours and polymershims resist wear and reduce noise.Extended-life hydraulic filters (1,000 hours)and long-life hydraulic oil (5,000 hours)also are provided to maximize service lifeand reduce downtime.Regular service and maintenance is easy

on the R35Z-9 with doors, covers and hoodsbuilt for complete open access. A central-ized lubrication bank and easy change aircleaner also are available for faster and eas-ier servicing.For more information, call 877/509-2254

or visit www.hceamericas.com.(This story also can be found on


www.constructionequipmentguide.com.)The R35Z-9 boasts a dig depth of 10 ft. 4 in. (3.1 m) a bucket digging force of 7,050lbf (31.4 kN) and bucket capacity of 3.78 cu. ft. (.107 cu m).


We make one of the broadest lines of construction, mining, road

building and material handling equipment in the world. All

backed by top-notch warranty, training, parts and service

support. Contact your local dealer today for more information...

T O U G H W O R L D . T O U G H E Q U I P M E N T.www.liugongna.com

Dearler 1Houston, TX

p. (555) 555 - 5555www.dealersite.com

Dealer 2Austin, TX


Dealer 3Dallas, TX


Dealer 4San Antonio, TX


EVERY JOB.EVERYWHERE.

Noble Equipment

505 Rankin Road • Houston, TX 77073

281-443-7667 • Fax 281-443-7886

www.nobleiron.com

• December 27, 2014 • www.constructionequipmentguide.com • Parts Section • Construction Equipment Guide

© 2011 ESCO Corporation.

The Ultralok Tooth System offers a hammerless lock that is integrated into the point - coupled with ESCO excavator buckets, it maximizes penetration, reduces fuel costs, and increases productivity.

MaximizeProductionwith ESCO

KIRBY-SMITHMACHINERY, INC.

www.kirby-smith.com

6715 W. RenoOklahoma City, OK 73137

800/375-3339Fax: 405/787-5973

12321 E. Pine St.Tulsa, OK 74116800/375-3733

Fax: 918/437-7065

1629 Vision Dr.Abilene, TX 79602877/577-5729

3922 I-40 EastAmarillo, TX 79103800/283-1247

8505 So Central ExpwyDallas, TX 75241800/753-1247

1450 NE Loop 820Fort Worth, TX 76106877/851-9977

3201 E Slaton Hwy.Lubbock, TX 79404866/289-6087

7301 East I-20Odessa, TX

877/794-1800432/333-7000

Since 1985!

CALL JENNIFER TODAY!(888) [email protected]

www.RBusedParts.com

NEW, USED & REMAN PARTS• Undercarriage

• Arms & Booms

• Cylinders

• Valves

• Transmissions

• Pumps

• Engines

• and More!

Leading Edge Now OffersMulti-Ripper Talon Bucket

Leading Edge Attachments Inc. now offers the multi-ripper talon bucket as an addi-tion to the multi-ripper SHARC product line. Designed mainly for utility pipelinecontractors, the multi-ripper talon bucket works on the same principle as the multi-ripper bucket, except the bucket is very narrow, and the leading edges have beenredesigned so that the center rib can be eliminated, thus improving capacity fill anddumping for a narrow bucket. The performance of this style of maximum breakout“one tooth at a time” bucket avoids the use of rock trenchers, hammers and blast-ing.

For more information, call 866/928-5800 or visit www.digrock.com.


hitachiconstruction.com

A “jack-of-all-trades” is good at some things, but great at nothing. That’s why at

Hitachi, we stay on course specializing in excavators. By not getting sidetracked,

we make exactly what you want. Great, reliable excavators. THAT’S ALL.

N E V E R S I D E T R A C K E D .

4 RIVERS EQUIPMENTwww.4 riversequipment.com

Albuquerque, NM • (505) 884-2900

El Paso, TX • (915) 598-1133

Farmington, NM • (505) 326-1101

Hobbs, NM • (575) 392-6923

320-259-6222

OCT EQUIPMENTwww.octequipment.com

Clinton, OK • 580-323-3422

Oklahoma City, OK • 405-789-6812 • 800-375-2273

Tulsa, OK • 918-437-5085 • 800-375-1628

POWER EQUIPMENT COMPANYwww.power-equip.com

500 E. 62nd Ave. • Denver, CO 80216303-288-6801 • Fax: 303-288-6809

Grand Junction, CO • 970-243-0722

Colorado Springs, CO • 719-392-1155

Greeley, CO • 970-669-6209

ROMCO EQUIPMENT CO.www.romco.com

Austin, TX • (512) 388-2529 • (877) 851-1026

Buffalo, TX • (903) 322-5602

Carmine, TX • (979) 278-3570

Dallas, TX • (214) 819-4100 • (800) 227-6626

Ft. Worth, TX • (817) 626-2288 • (866) 966-4602

Houston, TX • (713) 937-3005 • (800) 865-6998

Longview, TX • (903) 758-5576

Rio Grande Valley, TX • (956) 565-0100

San Antonio, TX • (210) 648-4600 • (800) 966-4601

ROL Remote Oilfield LocationThree Rivers, TX • (361) 254-2317


Bobcat CentralStockton, CA209-466-9631

4 Rivers EquipmentAlbuquerque, NM505-884-2900

Tractor & Equipment Inc.

Helena, MT406-442-2990

Ditch Witch of Arizona

Phoenix, AZ602-437-0351

Honnen EquipmentSalt Lake City, UT801-262-7441


EXPERIENCE THE POWER OF

HYUNDAI

Looking for power?

Hyundai machines come standard with Hi-Mate RMS. That’s the power of technology, giving you the data you need to keep your projects running smoothly.

Learn more at hceamericas.com.

e at hceamericas.com.n morLear

you need to keep your projects running smoothlys the power of technologyThat’

Hyundai machines come standard with Hi-Mate RMS.

Looking for power?

e at hceamericas.com.

you need to keep your projects running smoothly, giving you the d technology y, giving you the data


Looking for power?

.

CALL FOR DEMO AND PRICING

you need to keep your projects running smoothly, giving you the data


CALL FOR DEMO AND PRICING

CALIFORNIAMecoM equipMent

www.mecomequipment.com

Stockton, CA 209-466-5135

HeAVY equipMent SALeS

Corona, CA 951-674-9999Pacoima, CA818-834-0102

NEW MEXICO ciSco FoRD equipMent

www.cisco-eq.com

Artesia, NM575-748-1314

TEXASciSco FoRD equipMentwww.cisco-eq.com

520 SE Loop 338Odessa, TX 79762432-550-9181Fax: 432-367-9335Lubbock, TX806-745-9595San Angelo, TX325-653-2121

FouR SeASonS equipMent

Dallas, TX 214-388-1700Houston, TX 281-807-9777

WASHINGTONJet citY equipMent

Oak Harbor, WA 360-675-4441North Seattle, WA360-651-9079Wenatchee, WA509-888-8181


KOMATSU EQUIPMENTCOMPANY

1486 South Distribution DriveSalt Lake City, UT 84104

801-972-36604460 Pioneer WayElko, NV 89801

775-753-75573825 Losee Road

North Las Vegas, NV 89030702-399-1004

900 Marietta WaySparks, NV 89431

775-356-13346253 West Gilbert Industrial Court

Hurricane, UT 84737435-986-1000

10790 South Highway 59Gillette, WY 82718

307-682-1445405 Jonah Drive

Rock Springs, WY 82901307-686-1300

ROAD MACHINERYwww.roadmachinery.com

Gilbert, AZ480-545-2400

Phoenix, AZ602-252-7121

Prescott, AZ928-778-5621

Tucson, AZ800-989-8681

Bakersfield, CA661-695-4830

Fremont, CA510-659-1903

Fresno, CA559-834-3215

Mojave, CA - Coming Soon

Perris, CA909-355-3600

Pico Rivera, CA562-699-6767

Redding, CA530-229-3820

Sacramento, CA916-375-3540

Albuquerque, NM505-345-8383

Carlsbad, NM575-628-8301

Farmington, NM505-324-8601

El Paso, TX915-872-1001

Shuttle Buggy Instrumental in Process“We were responsible for base

course and paving of the new runwayand the overall construction of the largeapron and taxiway,” said Jeff Boone,project manager of United Companies.“We needed to complete our portionsof the combined projects within theeight-month timeline for the wholeproject, so our timing was tight.”United Companies had two major

responsibilities in the project: the dirtand stonework to create the subbaseand the finish paving on the runway,apron and the aircraft turnaround. Inaddition to the main runway, UnitedCompanies paved a 650 by 320 ft.(198 by 97.5 m) apron and a 1,200long by 50 ft. (365 by 15 m) widetaxiway.After Fiore & Sons completed the

demo of the old runway, UnitedCompanies came on site and moved100,000 cu. yd. (76,455 cu m) of dirtfor the large apron and widened run-way. Between the two areas, thecompany placed 70,000 tons(63,502 t) or 35,000 cu. yd. (26,759cu m) of p154 and p209 crushedaggregate base course in 6-in. (15 m)lifts with the company’s threeCaterpillar 140H motorgradersequipped with Topcon machine con-trol.For the paving, the United

Companies placed 23,000 tons ofFAA-spec HMA in two lifts of 2 in. (5cm) deep. To meet stringent FAArequirements, the finished paving, afterleveling by a 16 ft. (4.9 m) straightedge, must be within 3/16 of an inch.There was no room for variance.“We’ve paved a lot of airports and

our crew understands the quality stan-dard we must reach,” said RickBottenfield, paving manager of UnitedCompanies. “The finished paving is thefinal and most noticed step in achievingthe FAA tolerances.”United Companies has four paving

crews. The company owns four asphaltpaving machines — a Caterpillar AP-1055E, two Cat AP655Ds and a Volvopaver. Additionally, the company has aRoadtec SB-2500 Shuttle Buggy mate-rial transfer vehicle and various vibra-tory compactors. Bottenfield assigned the

highway/airport paving crew that usesthe SB-2500 Shuttle Buggy to theMeeker Airport project, “because Iwanted the advantage of continuouspaving the Shuttle Buggy provides.”The Shuttle Buggy can store up to

15 tons (13.6 t) of asphalt mix, allow-

ing haul vehicles to unload as soon asthey arrive. The large storage capacityis said to not only help reduce truckcycles and hauling costs, but providean uninterrupted, continual flow ofmaterial to the paver.The SB-2500 features an anti-segre-

gation auger, which remixes materialsto address aggregate and temperaturesegregation issues. Pavement lifespantests, as they relate to temperature seg-regation during the paving process,have shown that a temperature differ-ential of less than seven-degreesCelsius in the mat behind the paver arekey to even compaction and thereforepavement durability.Infrared imaging capturing paved

surfaces where the Shuttle BuggyMTV has been used reveals a qualityadvantage. In infrared imaging testsconducted by Roadtec in the UnitedStates as well as in Europe, the resultsshow the machine consistently remixesto achieve temperature differentialbelow the seven-degree temperaturethreshold. With the Meeker Airport project,

United Companies believed that theShuttle Buggy was instrumental in pre-venting asphalt mix segregation at somany points during the paving process.“Even though our production plant

happened to be located very close tothe site, we understand that a lot canhappen to the FAA-spec HMA even

during a short transport,” Bottenfieldsaid. “The Shuttle Buggy gave us thedistinct advantage of continuouspaving by ensuring the material is thor-oughly mixed and at the right temp –we’re not waiting for the plant or deliv-ery trucks since the shuttle buggy hasample storage capacity to ensure thecontinual flow of asphalt to the paver.”Bottenfield credited the Shuttle

Buggy with helping to “ensure we hadalmost no rework on this project — wehad just a few spots requiring grind-ing.”The United Companies acquired its

Shuttle Buggy MTV from a sister com-pany that had upgraded to a newermodel. Currently, the company appearsto be the only contractor in westernColorado that has a MTV.“Because we have the Shuttle

Buggy, we have a competitive advan-tage since we’re seeing FederalHighway Administration specs comingthrough specifically requiring that aShuttle Buggy be used, because theyknow the machine offers quality andconsistency advantages,” saidBottenfield.The final International Roughness

Index of the recently completedMeeker Airport runway surface waswell within the FAA specifications.Both the dirt and paving crews ofUnited Companies were pleased withthe work they’ve completed on thenow upgraded Meeker Airport.As Boone said. “We can’t argue

about the quality of the finishedresults…the smoothness of the runwaypavement can speak for itself.”


Construction Equipment Guide’s Web

site at www.constructionequipment-

guide.com.)

AIRPORT from page 1

With the Meeker Airport project,United Companies believed that theShuttle Buggy was instrumental inpreventing asphalt mix segregationat so many points during thepaving process.

The final International RoughnessIndex of the recently completedMeeker Airport runway surface waswell within the FAA specifications.


From Komatsu - The Excavator Experts

Efficient Komatsu Tier 4 Interim engines and advanced hydraulic system maximize productivity while providing up to 10% lower fuel consumptionEnhanced operator environment improves comfort and machine controlKomatsu CARE provides complimentary Tier 4 maintenance, including KDPF exchange filters. Contact your Komatsu distributor for details.

Komatsu Dash 10 excavators provide increased horsepower, improved operator comfort and reduced fuel consumption. The excavator experts at Komatsu can help you complete jobs more quickly, while lowering your fuel and maintenance costs.

DASH 10 EXCAVATORS

www.komatsuamerica.com

.komatsuamerica.comwww

.komatsuamerica.com

KIRBY-SMITH MACHINERY INC.

6715 W RenoOklahoma City, OK 73137

800-375-3339405-495-7820

Fax: 405-787-597312321 E. Pine Street

Tulsa, OK 74116800-375-3733918-438-1700

Fax: 918-437-7065Abilene, TX877-577-5729325-692-6334Amarillo, TX800-283-1247806-373-2826

Dallas, TX800-753-1247214-371-7777Ft. Worth, TX877-851-9977817-378-0600Lubbock, TX866-289-6087806-745-2112Odessa, TX877-794-1800432-333-7000

www.kirby-smith.com

POWER MOTIVE CORPORATION

DENVER HEADQUARTERS5000 Vasquez Blvd.Denver, CO 80216888-271-3308

Colorado Springs, CO888-271-3308

Grand Junction, CO888-271-3308Milliken, CO888-271-3308Durango, CO888-271-3308

Cheyenne, WY888-271-3308

www.powermotivecorp.com

WAUKESHA-PEARCE

INDUSTRIES, INC.12320 S. Main

Houston, TX 77035713-723-1050

Fax: 713-551-0798Tomball, TX281-351-9016Kilgore, TX903-984-2011

Port Arthur, TX409-721-5305

Corpus Christi, TX361-884-8275Edinburg, TX956-386-0107


Pflugerville, TX512-251-0013Buffalo, TX903-322-7150www.wpi.com

Hamm has expanded the rangeof HD+ series rollers by ninemachine types with service weightsof 14,000 lbs. and 16,000 lbs.(6,350 and 7,257 kg). The newHD+ 70i (15,000 lbs. [6,804 kg]),roller drum width 5 ft. (1.50 m) andHD+ 80i 16,000 lbs., roller drumwidth 5.5 ft. (1.68 m) are availableas vibratory, oscillatory, combi andhigh frequency rollers. The HD+80i also will be offered with a splitdrum.

Clean and Efficient Tier IVEngine Technology

Equipped with modern enginetechnology, the HD+ 70i and HD+80i rollers comply with the verystringent Tier IVf exhaust gas regu-lations in force since 2014. TheDeutz 55.4 kW 4-cylinder dieselengine is fitted with a diesel oxida-tion catalyser (DOC) to reduce par-ticulate emissions. The cooling sys-tem also meets the most up-to-datedemands: two separately controlledfans ensure optimum cooling ofcharge air, hydraulic oil and enginecoolant. At the same time, the load-depend-ent fan control for engine cooling saves fueland reduces noise emissions.The larger rollers HD+ 90i and HD+ 110i

(85 kW) as well as HD+ 120i and HD+ 140i(115 kW) are available with new Tier IVi-compliant engines now.All these rollers come with the

Hammtronic machine management systemas standard. This means optimized perform-ance, minimized fuel consumption, engineoperation in the optimum load range at alltimes and high-quality, consistent com-paction through control of the traction andparameters such as speed and frequency.

Maximum ComfortThe HD+ 70i and HD+ 80i rollers offer a

spacious XXL platform resp. cab with a lat-erally adjustable seat. The powerful heater(option) also can be complemented with airconditioning if desired. Drivers have an enhanced view of the

roller drum and water sprinkler. As there are

no intruding pillars, they also overview thesurrounding area. Meanwhile the operatingconsole and display remains in the field ofview at all times, being attached to the seat. Despite the comfortable interior head-

room, the overall height of the new HD+ 70iand HD+ 80i models is 2 in. (5 cm) less thantheir forerunners. This facilitates transportand working in areas with limited overheadclearance. Hamm also can supply the newHD+ 70i and HD+ 80i models with ROPSroof or sun shield roof.

Top-Class Handling and HighCompaction Power

The handling and compaction qualities ofthe new tandem rollers are based on the idealweight distribution, so they quickly produceperfectly even surfaces, according to themanufacturer. Moreover, a stepless frequen-cy adjustment is provided. When reversing,the automatic transmission provides gentleacceleration and braking, playing its part inensuring even asphalt layers without bulges

or hollows.In addition, the crab steering mode offset

has been increased by 40 percent comparedto the previous HD 75 model. This results inplenty of clearance for clean edge pressing.

Productivity Comes as StandardWith a large water and diesel tank, both

new models are equipped for long workingdays: the capacities enable working a fullshift without refilling. Maximum availabili-ty is provided by a water sprinkler systemwith a second water pump. The water quan-tity can be fine-tuned by the push of a buttonand an indicator shows constantly the resid-ual volume of water in the tank.

New: Telematics and Rear-View Cameras

The HD+ series now features a telematicsinterface, which can be used to transmit datafor use in fleet management systems. It alsocan be used for remote monitoring or fortheft protection. The VEDA option for the

HCQ measurement and documentation sys-tem enables the export of data in conformitywith the US analysis software “Veda” forcomprehensive compaction control inasphalt construction.Optional rear view cameras ensure even

more safety. A 5.6 in. display allows thedriver to check for the presence of people orobstructions in the area immediately behindthe roller at any time.

Award-Winning DesignSince its launch in 2010, the HD+ series

has received multiple awards for its success-ful design and usability, amongst them the iFdesign award 2010 in gold, the red dotdesign award 2010, the American “GoodDesign Award” and the French “Observeurdu design.” For more information, visit

www.hamm.eu.(This story also can be found on



For more information on paving, compaction and milling equipment, as well as comparison charts, visit CEG's Web site at www.constructionequipmentguide.com.SECT IONPaving

Pages 41-47

Hamm Expands HD+ Series Range by Nine Machines TypesThe HD+ series of articulated tandem rollers offers a

solution for every asphalt compaction task with sevenbasic models and a diversity of roller drums and

options.

• December 27, 2014 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide

Serving the Asphalt Industry for 25 Years866-430-7539 www.jfwequipment.com

[email protected]

2000 Etnyre K chipspreader,10-20 ft extendable spread hopper, front wheel drive, computerized, Cummins 8.3Ldiesel engine, hydrostatic drive,hydraulically powered slidingcontrol panel and seat, tiresapprox 60%

3517 Wayne White Rd., Climax, NC 27233

1998 Blaw Knox PF 3200 paver, w/ 2006 yr modelOmni IIIE electric screed 10-18ft , power slope, crown& height, washdown hose & reel, Cummins diesel

2002 Etnyre Shooter asphalt distributor, 2000 gallons,computerized w/1 ft cut-offs, propane heat, 12 ft spraybar, front mount pump, 2002 IH 4700 truck w/T444Ediesel engine, 5 spd trans, 2 spd axle, air brakes,93,365 miles

New Marathon MM120PT oil jacketed mastic mixertrailer mounted, 120 gallons, 25hp Kohler propaneengine, single 410,000 BTU vapor propane burner,automatic temperature control, full sweep hydraulicagitation, reverse anti-splash loading door, overnightheat, propane torch, tool heater, electric brakes onlead axle, pintle hitch

2003 Rosco Maximizer II asphalt distributor, 1750gallons, EZ-2S computer w/1 ft cut-offs, propane heat,12 ft spray bar, 2003 Freightliner cabover w/Cumminsdiesel, 6 spd Allison auto trans, air brakes, a/c, 77,796miles

1998 Etnyre S-2000 asphalt distributor, 2000 gallons,computerized w/1 ft cut-offs, propane heat, 13 ft spraybar, front mount pump, 1998 Ford F800 w/Cumminsdiesel, 5 spd trans, 2 spd axle, air brakes

2005 Ingersoll Rand DD112HF double drum 78” highfrequency vibratory roller, Cummins diesel engine,water system, canopy

1995 Rosco SPRH-H chip spreader, Cummins 5.9Ldiesel engine, 12 ft spread hopper w/platform, goodrunning and working condition

2007 Etnyre Centennial II, 2000 gallon distributor,computerized w/1 ft cut-offs, 12 ft spray bar, propaneheat, front mount pump, 2007 IH 7300 truck w/DT466diesel engine, 6 spd trans, 2 spd axle, a/c, air brakes,tires very good condition, 83,536 miles

Vogele’s Super 2100-3i SavesFuel, Boosts Productivity

Vögele’s 47,179-lb. (21,400 kg) Super2100-3i is the successor to the Super 2100-2,and is the most powerful paver of the newDash 3 generation from Vögele. As such it’sideal for major paving projects incorporatingall types of hot mix asphalt — includingpremium mixes such as stone matrix asphalt,as well as cement-treated base and rollercompacted concrete — with ease in a varietyof widths from 8 ft. 4 in. to 42 ft. 6 in. (2.5 to13 m), according to the manufacturer.The theme of the Dash 3 generation is that

lower fuel consumption leads to lower emis-sions, which leads to lower costs. TheVögele EcoPlus low-emissions packagecombines a number of individual measures,which reduce the fuel consumption andnoise of the Dash 3 pavers:Fuel consumption is minimized in a num-

ber of ways. When the paver is stationarywhile waiting, all hydraulic pumps for trac-tion, conveyors and augers and compactingsystems are automatically disengaged afterabout one minute. Reducing drag also makesit easier to start the paver at low outside tem-peratures.The tamper is driven by a variable dis-

placement pump, which delivers the amountof oil needed for the current tamper speed,also saving fuel.The speed of the variable-speed fan auto-

matically adjusts in line with engine load andambient temperature, as well as the temper-ature of the oil and cooling water. The fan isdriven via a viscous coupling in accordancewith temperature and engine load. In con-trast to a hydraulic drive, this new type of fandrive stands out through its considerablygreater energy efficiency, while being verymuch quieter, according to the manufacturer.The user-friendly ErgoPlus 3 operating

system has been enhanced with useful sup-plementary features for the new Dash 3 gen-eration. The redesigned color display, forexample, has an intuitive, high-contrast userinterface, providing readability even in poorlighting conditions.The Super 2100-3i’s AutoSet Plus feature

has two automatic functions. The automaticrepositioning function facilitates the continu-ation of work when moving on the job sitefrom one work section to another, or after thepaver has been transported.The automatic function for paving pro-

grams in Vögele pavers, on the other hand,allows operating personnel to store specificpaving programs in the paving process.Values for tamper and vibration speed, con-veyor and auger speed, height of the augerand paving speed are stored at the push of abutton. Once stored, the program can then beretrieved and reused whenever needed.Vögele sets new standards in terms of

compaction. Vögele’s high compaction tech-nology is based on pressure bar(s) technolo-gy, driven by pulsed flow hydraulics.Pressure bars comprise the core of Vögelehigh performance compaction screeds for awide variety of paving media, and make asubstantial contribution to the high-qualityand economical building of roads.For more information, call 615/501-0600

or visit www.wirtgenamerica.com.(This story also can be found on



Vögele’s 47,179-lb. (21,400 kg) Super2100-3i is the successor to the Super2100-2, and is the most powerful paverof the new Dash 3 generation fromVögele.

Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • December 27, 2014 •

Introducing 12 tonsof stress relief

THE COMPACTION EXPERTS

BOMAG introduces the new standardfor affordable, user-friendly12-tonsoil compactors. The new BW211-40series is loaded with ergonomic featuresto reduce operator fatigue. Plus itdelivers over 53,000 lbs. of centrifugalforce (nearly 62,000 lbs. for pad footroller) over its massive 84-in workingwidth. Other benefits include:

•Redesigned, vibration-isolatedoperator’s platform with easy to usecontrols and improved sight lines

•Shorter stop to stop steering input forless fatigue, 12-degree oscillation and35-degree steering angle for optimummaneuverability

•Easy open, no tool hood for betterengine access

•EPA-compliant Tier 3 diesel engines

For detailed specs and full listof features and benefits on

BOMAG 40-series rollers, visitwww.bomag-americas.com

9

P.O. Box 31388Amarillo, TX 79120806-335-1681Fax: 806-335-3932

Lubbock, TX806-763-0473

Odessa, TX432-580-3337

Abilene, TX325-677-2291

San Angelo, TX325-651-3337

Wichita Falls, TX940-322-3337

Enid, OK580-233-5000

Tulsa, OK918-245-5926

McAlester, OK918-423-2555

500 E. 62nd Ave.Denver, CO 80216303-288-6801Fax: 303-288-6809

2329 River RoadGrand Junction, CO

81505970-243-0722Fax: 970-243-0726

2940 E. Las Vegas St.Colorado Springs, CO

80906719-392-1155Fax: 719-390-9604

8806 E. US Hwy. 34Johnstown, CO 80534

970-669-6209Fax: 970-669-6280

100 Barr Ave. SEAlbuquerque, NM

87105505-344-9466Fax: 505-345-4715

3251 MJB RoadCasper, WY 82601307-577-9700Fax: 307-577-9703

www.rgwequipment.com

550 Greenville RoadLivermore, CA 94550

925-606-2456Fax: 925-606-2492

www.yellowhouse.us


BEE EQUIPMENT SALES, LTD

www.beeequipmentsales.comLubbock TX806/745-1511

KIRBY-SMITH MACHINERY, INC.www.kirby-smith.comOklahoma City, OK800/375-3339

Tulsa, OK800/375-3733

Kansas City, KS877/851-5729


Austin512/388-2529877/851-1026

Buffalo903/322-5602

Dallas, TX214/819-4100800/227-6626

Ft. Worth817/626-2288866/966-4602

Longview903/758-5576

San Antonio210/648-4600800/966-4601

VT LeeBoy, Inc. 500 Lincoln County Pkwy Ext., Lincolnton, NC 28092 Call 704.966.3300 or www.LeeBoy.com

“WINTER” is Coming - Are You Ready ?

Snow Roadside Ditch Cleaning Asphalt MillingStreet Leaf Pickup Track and Feedlot Pickup

Road Shoulder Pickup

3000 Force Feed Loader

It’s your Year-Round Workhorse

If you can windrow it, this is a fast low cost way to load it.

Another LeeBoy Year Round Workhorse - Graders.


www.wirtgenamerica.com

UNBEATABLE TEAM.

ROAD AND MINERAL TECHNOLOGIES

The Wirtgen Group owes its strength to the excellence of its four product brands – Wirtgen, Vögele, Hamm and Kleemann – with their unique wealth of experience.

Put your trust in the Wirtgen Group team.

KIRBY-SMITH MACHINERY INC.www.kirby-smith.com

6715 W. RenoOklahoma City, OK

800-375-3339Tulsa, OK

918-438-1700Dallas, TX

214-371-7777Fort Worth, TX817-378-0600

Abilene, TX325-692-6334Amarillo, TX

806-373-2826Lubbock, TX

806-745-2112Odessa, TX

432-333-7000

MODERN MACHINERYwww.modernmachinery.com

Spokane, WA800-541-0754Kent, WA

800-669-2425Rochester, WA800-304-4421Portland, OR

800-950-7779Eugene, OR

800-826-9811

Boise, ID800-221-5211Pocatello, ID

800-829-4450Missoula, MT800-332-1617Kalispell, MT

800-434-4190Billings, MT

800-735-2589

HONNEN EQUIPMENT CO.www.honnen.com

5055 E. 72nd Ave.Commerce City, CO

303-287-7506800-646-6636Durango, CO

970-247-4460Grand Junction, CO

970-243-7090Idaho Falls, ID208-523-9915

Salt Lake City, UT801-262-7441

Ogden, UT801-627-0049St. George, UT435-652-8003Casper, WY

307-266-4474Gillette, WY

307-685-4288Rock Springs, WY

307-382-5284

ROAD MACHINERYwww.roadmachinery.com

Gilbert, AZ480-545-2400Phoenix, AZ

602-252-7121Prescott, AZ

928-778-5621Tucson, AZ

800-989-8681Bakersfield, CA661-695-4830

Fremont, CA510-659-1903Fresno, CA

559-834-3215Mojave, CA -Coming SoonPerris, CA

909-355-3600Pico Rivera, CA562-699-6767

Redding, CA530-229-3820Sacramento, CA916-375-3540

Albuquerque, NM505-345-8383Farmington, NM505-324-8601

COOPER EQUIPMENT CO.17474 Judson Rd.San Antonio, TX210-657-5151

NUECES POWER EQUIPMENT

www.nuecespower.comCorpus Christi, TX

361-289-0066Edinburg, TX

956-702-0066Laredo, TX

956-725-0066San Benito, TX956-361-0066Victoria, TX

361-576-0066Vinton, TX

915-541-0066Houston, TX

713-247-0066



Riverside, CA800/494-4863

Indio, CA760/342-8900

Imperial, CA800/464-4331

Lakeside, CA619/270-4300

Fort Worth, TX800/551-4905

Hewitt, TX800/551-8258

Irving, TX800/437-6342

Laredo, TX956/718-1909

Pflugerville, TX512/272-4141

New Braunfels, TX800/880-0880

Ehrenberg, AZ928/923-9611

Flagstaff, AZ928/526-0639

Phoenix, AZ602/415-4700

Prescott, AZ928/776-8300

Tucson, AZ520/294-5262

Wellton, AZ928/785-4276

Yuma, AZ928/341-7100

FOUR SEASONS EQUIPMENT8111 Mills Road, Houston, TX 77064281/807-9777 • Fax: 281/807-1233

1425 Swisco Road,Lake Charles, LA 70665337/626-6000 • Fax: 337/626-7600

www.powermotivecorp.com5000 Vasquez Blvd.Denver, CO 80216888/271-3308

Grand Junction, CO888/271-3308

Colorado Springs, CO888/271-3308

Milliken, CO888/271-3308

Durango, CO888/271-3308

Cheyenne, WY888/271-3308

4 RIVERS EQUIPMENT2301 Candelaria Rd. NEAlbuquerque, NM505/884-2900

11323 Rojas DriveEl Paso, TX915/598-1133

1100 Troy King Rd.Farmington, NM505/326-1101

2400 W. Bender Blvd.Hobbs, NM575/392-6923

POWER MOTIVE CORP.

KOMATSU EQUIPMENT CO.1486 S. Distribution DriveSalt Lake City, UT 84104801/972-3660Fax: 801/954-0936

4460 Pioneer WayElko, NV 89801775/753-7557

3825 Losee RoadNorth Las Vegas, NV 89030702/399-1004

900 Marietta WaySparks, NV 89431775/356-1334

6253 West Gilbert Industrial CourtHurricane, UT 84737435/986-1000

405 Jonah DriveRock Springs, WY 82901307/686-1300


The Easy Way To Advertise YourEquipment Valued At Less Than $1 MillionRun In Two Consecutive Issues For $105

Here's how the BARGAIN ADS Work:• Supply us with a photo of a machine (one machine per Bargain Ad) and a maximum 20 word description, plus contact and phone number.

• Either email your copy & photo to: [email protected], or mail to: Construction Equipment Guide, 470 Maryland Drive, Ft Washington, PA 19034.

• Cost is $105 per ad, $50 additional for color.

• Your ad will run for two consecutive issues in 1 region.

Your Ad Will Be Seen By Over 23,010 Construction Equipment Buyers in the Western States.

For more information, call Construction Equipment Guide today at

800/523-2200

“TRACKS FOR YOUR MACHINE!!” $7,000,000 Inventory of High-QualitySUMMIT Rubber Tracks to fit over 3500 models of construction equip. PNEUMATIC AND FLATPROOF SKIDSTEER TIRES also available. $95Next day shipping to 23 states.....................................................................Call

Summit Supply LLC888-888-1248 • [email protected] 25-26 TM

MCLAREN RUBBER TRACKS FOR MINI EXCAVATORS &TRACK LOADERS, The most trusted brand in Americabrings you quality tracks for your specific make andmodel.

Call McLaren 888-492-4230 26-1 DH

MCLAREN FOR SKID STEER TRACKS, Full flotation; traction; tire protection; machine stability; self-cleaning;less ground damage; fully rebuildable; interchangeableshoe types.

Call McLaren 888-492-4230 26-1 DH

MCLAREN SOLID CUSHION TIRES, for skid steers, backhoes, telehandlers, wheel loaders - Nu-Air Semi-Pneumatic Tire Technology: no flats ever; soft, air-cushioned ride; last 3 to 5 times longer than regularpneumatic tires; rims included; same day shipping; various tire sizes available.

Call McLaren 888-492-4230 26-1 DH

EXCAVATORS

Hydraulic Excavators

2011 Doosan DX180N, Narrow Track Excavator, Good condition, 2744 hrs ......................$109,400.

Gibson Machinery, LLC440-439-4000

MATERIAL HANDLERS

Material Handlers

1999 Daewoo 5450-III, Material/Scrap Handler, Fair condition, 6,170 hours ......................$145,000.

Gibson Machinery, LLC440-439-4000

CLASSIFIEDSClassified Rates:30 Words or Less for $30.00. Each Additional Word is $1.16.For just an additional $20 your ad can be posted on our online searchable

database for 30 daysAd runs for 2 (two) insertions - no changes in second insertion.

PLEASE ENCLOSE PAYMENT WITH ORDER and mail to:470 Maryland Drive• Fort Washington, PA 19034

215/885-2900 • Fax 215/885-2910Toll Free 1-800/523-2200

Hawthorne Cat Expanding,Hiring in San Diego, Hawaii

Hawthorne Cat, Cat equipment dealer inSan Diego and the Pacific Region for morethan 60 years, is expanding operations.Hawthorne Cat is seeking qualified appli-cants to fill a variety of positions from serv-ice technicians to management. Qualifiedcandidates have the opportunity to workwith Caterpillar — the world-renownedmanufacturer of industry leading construc-tion equipment, power generation andmarine propulsion engines for nearly 100years.

Qualified candidates can take part inThinkBIG, the Caterpillar Dealer ServiceTechnician Program. The ThinkBIG pro-gram offers college-level course work com-bined with on-the-job training. Upon com-pletion, participants will earn an associate ofscience degree.

Jim Champany, corporate service opera-tions manager, said, “The extensive 2-yearThinkBIG program is a terrific opportunityfor technicians to jump-start their careers.ThinkBIG graduates are equipped to handleevery day challenges in the shop or in thefield.”

Champany continued, “All HawthorneCat technicians receive ongoing Cat certifiedtraining to ensure they have the skill set andup-to-date knowledge needed to serviceequipment properly.”

Available technician positions includeengine service technician 1, machine servicetechnician 2, and rental technician 2 in SanDiego, Hawaii and Guam. Current manage-ment positions available include rental serv-ice manager, corporate finance manager, andservice manager.

According to Sue Shaw, Hawthorne CatCorporate human resources manager, “Weare looking for dedicated, motivated, andqualified individuals to join our growingteam of professionals in San Diego andthroughout the Pacific Region. HawthorneCat believes in rewarding exceptional per-formance and offers competitive wages plusa complete benefits package.”





KUBOTA BUCKET LOADER ATTACH-MENT FOR B7100 HST 4X4 | NEED AFRONT END BUCKET LOADER COM-PLETE FOR A KUBOTA MODELB71004X4 HST TRACTOR.CONTACT: ERICH DIENERPHONE: 479-785-9669EMAIL:[email protected]––––––––––––––––––––––––––––––––LOW HRD 24M GRADER. IF YOU HAVEANYTHING AVAILABLE PLS SEND IT TOOUR EMAIL INCL PICTURES, HRS ANDPRICE. THANKSCONTACT: JERRYPHONE: 0031227570364EMAIL: [email protected]––––––––––––––––––––––––––––––––BOBCAT S250 / BOBCAT T195/ BOBCATT650 | HELLO, LOOKING FOR BOBCATSKID STEER. MODEL NUMBER S250,T195 OR T650 WITH FORK BUCKET.PLEASE, CONTACT ME. THANKS,HEATHERCONTACT: CONTEK LLCPHONE: 678-585-4651FAX: 404-549-4670EMAIL:[email protected]––––––––––––––––––––––––––––––––TRENCH BOXES MANHOLE BOXES |WANTED, TRENCH AND MANHOLEBOXES, LET ME KNOW WHAT SIZE ANDPRICE AND LOCATION, WILL RESPONDTO ALL.CONTACT: DENNISPHONE: 1-520-798-3220FAX: 1-520-798-0740EMAIL:[email protected]––––––––––––––––––––––––––––––––ELECTRIC WALK BEHIND SAW | ELEC-TRIC SINGLE PHASE, 18" WALKBEHIND SAW. EDCO, CORE CUT.CONTACT: JOHNPHONE: 314-486-3924FAX: 636-519-7378EMAIL:[email protected]––––––––––––––––––––––––––––––––48 INCH ROCK SAW | LOOKING FOR AROCK SAWCONTACT: RICHARD DEALPHONE: 864-473-0194FAX: 864-473-0195EMAIL:[email protected]––––––––––––––––––––––––––––––––WE BUY EQUIPMENT MANUALS | WEARE LOOKING TO PURCHASE NEW ORUSED SERVICE, SHOP, PARTS, OPERA-TOR’S OR OTHER MANUALS FOREQUIPMENT, TRUCKS AND VEHICLESOF ALL SORTS. WE PREFER IN BULK,PERHAPS YOU HAVE COMPUTERIZEDYOUR SERVICE OR PARTS OPERATIONAND YOU HAVE BOOKS OR MANUALSYOU NO LONGER NEED, OR INVENTO-RIES YOU HAVE NOT SOLD. PERHAPSAS A DISCONTINUED PRODUCT LINE.WE WILL PURCHASE IN ANY USEABLECONDITION IN ANY AMOUNT YOUHAVE. PLEASE FEEL FREE TO CALL USAT 270-849-2270 OR EMAIL US.CONTACT: GRACE FRANCESPHONE: 270-849-2270EMAIL: [email protected]––––––––––––––––––––––––––––––––

VOLVO MC70B | SKID STEER LOADERCONTACT: KENPHONE: 401-743-6200EMAIL: [email protected]––––––––––––––––––––––––––––––––AIR COMPRESSOR | 85-150 CFM TOWBEHINDCONTACT: ROGER BUTTONPHONE: 315-729-1913FAX: 315-252-7367EMAIL:[email protected]––––––––––––––––––––––––––––––––TRAILERS | LOOKING FOR USED 60 TO70 TON TRAILERS. NOT FOR OVER THEROAD NO STINGERS OR JEEPS.CONTACT: RICHARD JAMISONPHONE: 443-695-5902EMAIL: [email protected]––––––––––––––––––––––––––––––––T800 KENWORTH DUMP TRUCK 2004-2012CONTACT: ERMIASPHONE: 301-755-7697EMAIL: [email protected]––––––––––––––––––––––––––––––––JOHN DEERE 300C ARTICULATEDDUMPTRUCK | LOOKING FOR GOODUSED MOTOR FOR A JD 300C UNIT.THANKSCONTACT: JUAN MONTANEZPHONE: 830-325-2529EMAIL: [email protected]––––––––––––––––––––––––––––––––CAT MOTOR GRADERS | WE NEEDRUNNING OR NON-RUNNING CATMOTOR GRADERS 12G, 14G, 14H, 140G& 140H.CONTACT: RIZPHONE: 832-528-0786EMAIL: [email protected]––––––––––––––––––––––––––––––––TERRAMITE T5C BACKHOE | USEDTERRAMITE T5CCONTACT: WYATT HARSHBARGERPHONE: 14172943359EMAIL:[email protected]––––––––––––––––––––––––––––––––CASE 580 SUPER M 4X4 EXTENDAHOECAB HEAT AND AIR | GOOD USEDCASE SUPER M EXTENDAHOE 4X4 CABW/HEAT AND AIR, LOW HOURSCONTACT: KENNETH L.SLOANPHONE: 913 915-0447FAX: 913 898-2343EMAIL:[email protected]––––––––––––––––––––––––––––––––BURCHLAND SILT FENCE INSTALLER |BURCHLAND XTS SILT FENCEINSTALLER WITH 72" OFFSET BAR.CONTACT: MIKEPHONE: 252-207-8964FAX: 252-261-5425 | EMAIL:[email protected]––––––––––––––––––––––––––––––––AIR COMPRESSOR | 85-150 CFM COMPRESSORCONTACT: ROGER BUTTONPHONE: 3157291913EMAIL: [email protected]––––––––––––––––––––––––––––––––

CAT 70/100/110/120 EXCAVATORS |LOOKING FOR CAT 70/110/120 EXCAVA-TORS-- PREFER UNADVERTISEDCONTACT: EDDIE GREENPHONE: 864-327-3909EMAIL:[email protected]––––––––––––––––––––––––––––––––CAT EXCAVATORS | WE ARE LOOKINGTO BUY CAT EXCAVATOR 330BL. CONTACT: RIZPHONE: 832-528-0786EMAIL: [email protected]––––––––––––––––––––––––––––––––OLDER 90/120 PRENTICE LOG LOADER| AN OLDER LOADER TO MOUNT ONTRUCK OR TRAILER. STRONG ENOUGHTO LOAD 16/17-9 BULKLOGS 1 OR 3 ATA TIMECONTACT: RUSTY COOKPHONE: 850-381-3005EMAIL:[email protected]––––––––––––––––––––––––––––––––KUBOTA KH35 | LOOKING FORSPROCKETS, BEARINGS AND RIGHTSIDE COVER FOR FINAL DRIVECONTACT: LEONPHONE: 781-389-0773EMAIL: [email protected]––––––––––––––––––––––––––––––––COMMERCIAL TRUCKS | LOOKING TOBUY ANY AND ALL SALVAGE, STOLEN,WRECKED OR HIGH MILEAGE HEAVYDUTY TRUCK, IN TEXAS, LOUISIANA,OR OKLAHOMA.CONTACT: BILL BPHONE: 281-745-7342FAX: 713-675-1195EMAIL:[email protected]––––––––––––––––––––––––––––––––CASE BACKHOES | 3. WE ARE LOOK-ING TO BUY 2WD CASE BACKHOE580E/SE/M/SM/K/SK/L/SL. CONTACT: STEVEPHONE: 832-528-0786EMAIL:[email protected]––––––––––––––––––––––––––––––––WE BUY EQUIPMENT MANUALS | WEARE LOOKING TO PURCHASE NEW ORUSED SERVICE, SHOP, PARTS, OPERA-TOR’S OR OTHER MANUALS FOREQUIPMENT OF ALL SORTS, BUT NOTINCLUDED TRUCKS AND VEHICLES.WE PREFER IN BULK, PERHAPS YOUHAVE COMPUTERIZED YOUR SERVICEOR PARTS OPERATION AND YOU HAVEBOOKS OR MANUALS YOU NOLONGER NEED, OR INVENTORIES YOUHAVE NOT SOLD. PERHAPS AS A DIS-CONTINUED PRODUCT LINE. WE WILLPURCHASE IN ANY USEABLE CONDI-TION IN ANY AMOUNT YOU HAVE.PLEASE CALL OR EMAIL US.CONTACT: GRACE FRANCESPHONE: 2708492270EMAIL: [email protected]––––––––––––––––––––––––––––––––30 INCH PADS TO FIT JOHN DEERE 120C EXCAVATOR, HAVE 24 INCH...COULDTRADE.CONTACT: JIM BLEDSOEPHONE: 816 324-5254EMAIL: [email protected]––––––––––––––––––––––––––––––––

14 FT UTILITY TRAILER | 14 FT. FLATBED SINGLE AXLE USED EXCELLENTCONDITION UTILITY TRAILER. TRAILERTO HAUL A 12 FT.POLARIS. MAX. PRICE$1000.00CONTACT: TOMEMAIL:[email protected]––––––––––––––––––––––––––––––––USED WELDER GAS/ROCK BOX | USEDGAS MILLER WELDER/ 12 YARD ROCKBOXCONTACT: VERNONPHONE: 8285578196EMAIL: [email protected]––––––––––––––––––––––––––––––––JCB 208S | LOOKING FOR A NICE 208SJCB MACHINE WITH CAB AND HEATAND SNOW BLOWER.. MACHINE ISMOST IMPORTANT TO MECONTACT: KEN TEMBORSKIPHONE: 570.233,0351FAX: 570.233.2399EMAIL:[email protected]––––––––––––––––––––––––––––––––CAT ENGINE AND DOZER | NEED A CAT ENGINE 3406 OR 3408 FOR A CATLOADER AND OLDER MODEL D8K AT WHOLESALE WITH OR WITHOUTRIPPERCONTACT: SANTIAGO SCARZELLAPHONE: 305 506 4263EMAIL: [email protected]––––––––––––––––––––––––––––––––ANY BRAND | USED FRONT END LOADERS.4X4.PRICE UNDER $5,000CONTACT: EDWARD THORNTONPHONE: (810)210-2002EMAIL:[email protected]––––––––––––––––––––––––––––––––TLBCONTACT: JONASPHONE: 0726389111EMAIL: [email protected]––––––––––––––––––––––––––––––––KUBOTA S5205 WHEEL LOADERCONTACT: JOHN T. HUDSONPHONE: 601-606-2223FAX: 601-794-2734EMAIL:[email protected]––––––––––––––––––––––––––––––––CAT D8T | 5000 HOURS MAX, CAB,DRAWBAR, SU/T BLADE, SYSTEM ONEU/C. MUST BE CLEAN TRACTOR WITHVERY GOOD UNDERCARRIAGECONTACT: BUZZY KEITHPHONE: 404-610-6754EMAIL: [email protected]––––––––––––––––––––––––––––––––BOBCAT/SKIDSTEER | I NEED A RUN-NING BOBCAT. I AM WILLING TO PAY$2500-$3000. HAVE CASH IN HAND.BOISE IDAHO, WILL PICK UP. A COUPLE HUNDRED MILES DRIVE ISACCEPTABLE.CONTACT: WILLIAM RESNERPHONE: 208-968-8968EMAIL: [email protected]––––––––––––––––––––––––––––––––

CAT WHEEL LOADERS AND CATMOTOR GRADERS | . MEGA EQUIP-MENT INC. IS LOOKING TO BUY CATWHEEL LOADERS 910, 920, 930, 936 &936E.. MEGA EQUIPMENT INC. IS LOOK-ING TO BUY CAT MOTOR GRADERS12G, 14G, 14H, 140G & 140H.CONTACT: RIZPHONE: 281-491-0614EMAIL: [email protected]––––––––––––––––––––––––––––––––USED CAT 953 TRACK LOADERCONTACT: DANNY EVERHARTEMAIL:[email protected]––––––––––––––––––––––––––––––––CAT | SEND PICTURES, DETAILS, ANDPRICE. IF YOU HAVE ANY OF THE FOL-LOWING : WHEEL LOADER CAT 936ECAT 950B CAT 950E CAT 966D CAT 966E966F;966F;980C;980F KOMATSU WA600-3;WA700-3 12G;14G;14H D8R;D9N;D9RWITH RIPPER 330BLCONTACT: FRANKPHONE: 832-655-2921FAX: 832-655-2921EMAIL:[email protected]––––––––––––––––––––––––––––––––TIMKEN BEARING, #252-310 AND M 252-349 NEW OR USEDCONTACT: GARY SISKPHONE: 816-517-4531FAX: 816-230-6264EMAIL:[email protected]––––––––––––––––––––––––––––––––BILLJAX ESCALADE UTILITY TRAILER |3000 LB. MAX LOAD ESCALADE BILL-JAX WITH HYDAULIC RAISING ANDLOWERING BED FOR LIGHT WT. EQUIP-MENT. I AM LOOKING FOR USED INGOOD SHAPECONTACT: RICK BOONSTRAPHONE: (616)293-9240EMAIL: [email protected]––––––––––––––––––––––––––––––––RT CRANE | 2002/2006 30 TON ROUGHTERRAIN CRANE> GROVE, TEREX,LINKBELT, CLEAN + DRY CERTIFIED APLUS A.S.A.P.CONTACT: DENNIS OPATPHONE: 630-894-2778FAX: 630-894-5063EMAIL:[email protected]––––––––––––––––––––––––––––––––TRAILERS | FLEET OR FLATBED ORSTEPDECK TRAILERSCONTACT: WILLIE KIRCHEMAIL: [email protected]––––––––––––––––––––––––––––––––LINCOLN AIR VANTAGE | WELDER ANDAIR COMPRESSOR KUBOTA ENGINECONTACT: RICK PHILLIPSPHONE: 4192330949EMAIL: [email protected]––––––––––––––––––––––––––––––––BULLDOZER | I NEED TO BUY D9NBULLDOZER OR D9R MANUAL TRANS-MISSION ASAP THANKSCONTACT: OUFIPHONE: 966530185141EMAIL: [email protected]––––––––––––––––––––––––––––––––

USED CATERPILLAR EXCAVATOR |NEED A QUOTE FOR FAIRLY USED ANDLOW HOURS EXCAVATOR OF 20-25KG/TON CAPACITY (CATEPILLAR)CONTACT: RICHARDPHONE: +2348037215213EMAIL: [email protected]––––––––––––––––––––––––––––––––CASE 580 LOADER BACKHOES | CASE580 LOADER BACKHOES 580 SK , 580L, 580 SL, 580 M, 580 SM, 580 N, 580 SNCONTACT: FRANK @ TRICO EQUIP-MENTPHONE: 1-800 TRICO 50FAX: 732-780-3618EMAIL:[email protected]––––––––––––––––––––––––––––––––LOADER TIRE | LOOKING TO BUY29.5X25 L5 LOADER TIRE WITH 80-85%WEAR TO MATCH OTHER TIRES.CONTACT: PHILIP DEMORANVILLEPHONE: 508-636-5771FAX: 508 636 5707EMAIL:[email protected]––––––––––––––––––––––––––––––––3-5YD ROLL OUT / HIGH TIP BUCKETFOR WHEEL LOADERCONTACT: AUSTIN SEALSPHONE: 912-661-7820EMAIL:[email protected]––––––––––––––––––––––––––––––––UTILITY TRAILER | WORK TRAILERSCONTACT: FORAN AND ASSOCIATESPHONE: 9085816357FAX: 9087307543EMAIL:[email protected]––––––––––––––––––––––––––––––––SKID SPRAYEREMAIL: [email protected]––––––––––––––––––––––––––––––––ASPHALT PAVERS | WE ARE LOOKINGTO BUY SEVERAL UNITS OF ASPHALTPAVERS FROM ABG TITAN, DEMAG,DYNAPAC, AND VOGELE. IF YOU HAVEANY, PLEASE SEND PICTURES, SERIALNUMBER, CONDITION, LOCATION ANDFINAL OFFER PRICE.CONTACT: AIMN BLBOLPHONE: +971504814823FAX: +97165355291EMAIL:[email protected]––––––––––––––––––––––––––––––––DOUBLE AXLE TRAILER | FITS 2.5/16HITCH AND HAS AT LEAST 20FEET OFROOM BY9FTCONTACT: GARYPOWELLPHONE: 217 691 5760EMAIL: [email protected]––––––––––––––––––––––––––––––––SCHWING CONCRETE PUMPS MOUNT-ED ON MACK TRUCKS 32METER TO 39METER 1994 / NEWERCONTACT: WILLIAM CROSSPHONE: 407 595 8221FAX: 407 843 0247EMAIL:[email protected]––––––––––––––––––––––––––––––––HAAS CNC W/4TH AXIS | 2X HAAS VF4CONTACT: KEN YOSHIDAPHONE: 949-887-4701EMAIL: [email protected]––––––––––––––––––––––––––––––––

Attention Contractors!Post Your Wanted To Buy Listings FREE!

Here’s How! List Your Wanted ItemsIf you would like to place your Wanted To Buy listings on our website for inclusion in our newsletters, simply visit:

www.ConstructionEquipmentGuide.com/wanted and enter your listings. Inappropriate or Sale Ads will be Deleted


ALEX LYON & SON

AUCTIONEERS

www.lyonauction.com315-633-2944�

• Albany, NYSat., December 27, 2014For: Rental Fleet ConstructionEquipment & more

• Columbus, OHSat., January 10, 2015For: Very Late Model Case & CatRental Return Auction & more

• Houston, TXThurs., January 22, 2015For: Late & Great Rental FleetConstruction Equipment

• Queretaro, MexicoFri., January 23, 2015For: Large Quantity Late Model CatConstruction Equipment

• Kissimmee, FLJanuary 31 – February 8, 2015For: 22nd Annual ConstructionEquipment, Truck & more

• Las Vegas, NVFri., March 6, 2015For: Large Rental Return Auction

RITCHIE BROS.

AUCTIONEERS

www.rbauction.com402-421-2631

• Las Vegas, NVFebruary 6, 2015

• Houston, TXFebruary 11-12, 2015

• Tipton, CAFebruary 13, 2015

• Orlando, FLFebruary 16-20, 2015

• The Rental ShowFebruary 22-25, 2015

• Albany, NYFebruary 25, 2015

• Phoenix, AZFebruary 26, 2015

• St. Aubin Sur Gaillon, FRAMarch 3, 2015

• Dubai, UAEMarch 10-11, 2015

• Sacramento, CAMarch 11, 2015

• Casper, WYMarch 25, 2015

• Louisville, KYMarch 26-28, 2015

• Grande Prairie AB, CANApril 9-10, 2015

• Intermat ParisApril 20-25, 2015

• Prince George BC, CANMay 6, 2015

• Lethbridge AB, CANMay 7, 2015

• Williston, NDMay 20, 2015

BAR NONE AUCTION

www.barnoneauction.com866-372-1700�

• Sacramento, CASat., January 10, 2015For: Heavy Equipment & CommercialTruck Sales

BIG IRON

www.bigiron.com800-937-3558�

• ONLINE ONLYDecember 31, 2014

CAT AUCTION SERVICES

www.catauctions.com866-750-9432�

• Kissimmee, FLFebruary 11-13, 2015For: Construction Equipment

COCHRAN AUCTIONS

www.cochranauctions.com�301-739-0538

• Boonsboro, MDJanuary 2-3, 2015For:2 Day Winter ContractorsRegional Equipment, Truck & TrailerAuction

HENDERSON AUCTIONS

www.hendersonauctions.com225-686-2252

• Livingston, LAJanuary 29-31, 2015For: Construction Equipment, Trucks& Tractors

I.R.A.Y. AUCTION

www.iraymn.com

�320-968-7230

• Foley, MN

Fri., March 13, 2015For: Heavy Equipment

IRON PLANET AUCTIONS

www.ironplanet.com

�888-433-5426

ONLINE AUCTIONSGo to www.ironplanet.com to view the

complete auction schedules, inspection

reports and to place your bid!

• ONLINE ONLY

January 7, 2015

• ONLINE ONLY

January 27-29, 2015

• Kissimmee, FL

February 11-13, 2015For: Construction Equipment

J.J. KANE AUCTIONEERS

www.jjkane.com

�855-GO2-KANE

• Dallas, TX

Thurs., January 29, 2015For: Heavy Equipment

• Philadelphia, PA

Sat., January 31, 2015For: Heavy Equipment

LLOYD MEEKINS & SONS

AUCTION COMPANY

www.meekinsauction.com

�800-499-6560

• Lumberton, NC

Tues., December 30, 2014For: 20th Annual Contractors Auction

• Pinetops, NC

January 28-29, 2015For: Absolute Auction featuringEquipment & Trucks from TricoElectric Co

MARTIN & MARTIN

AUCTIONEERS, INC.

www.mmaauction.com�864-947-7888

• Pelzer, NCWed., January 28, 2015For: Construction Equipment & TruckAuction

PETROWSKY AUCTIONEERS INC.

www.petrowskyauctioneers.com�860-642-4200

• North Franklin, CTFri., January 30, 2015For: Major Public Equipment Auction

PURPLE WAVE AUCTION

www.purplewave.com�866-608-9283

• ONLINE ONLYWed., December 31, 2014For: Construction Equipment

• ONLINE ONLYTues., January 20, 2015For: Truck & Trailer Auction

• ONLINE ONLYThurs., February 5, 2014For: Manhattan Trenching RetirementAuction

STEFFES GROUP INC.

www.steffesgroup.com�701-237-9173

• Wahpeton, NDWed., February 11, 2015For: Prime Concrete Inc. RetirementAuction

• West Fargo, NDWed., March 11, 2015For: Aglron Event

• Litchfield, MNThurs., March 19, 2015For: Aglron Event

• Mt. Pleasant, IAFri., March 20, 2015For: Spring Aglron Event

YODER & FREY AUCTIONEERS, INC.

www.yoderandfrey.com�419-865-3990

• Kissimmee, FLFebruary 9-16, 2015For: 41st Annual – HeavyConstruction Equipment, Trucks &Trailers

AuctionsComingTo view information on upcoming auctions visit our

Auction Calendar at www.constructionequipmentguide.com


To view our Business Calendar online, go to www.constructionequipmentguide.com.

SAVE THE DATE!AGC of Minnesota 95th Annual Meeting “Bringing It Together”Customer/Workforce/TechnologyWhen: Thursday, January 15, 2015

From 9:00 AM until 7:00 PMWhere: Minneapolis Marriott Southwest

5801 Opus ParkwayMinnetonka, (952) 935-0550

Contact: Denise [email protected]: 651/796-2186

NORTHERN GREEN EXPOMinneapolis Convention CenterMinneapolis, MNThe Northern Green Expo is going to take place from 14th – 16thJanuary, 2015 in Minneapolis. The show takes on the social chal-lenges related to pollution, natural resources and climatic changesneed to be handled before it becomes too late. The show has beendedicated to provide the future generation a greener planet and life.The innovation done in the technologies promises to bring forth ahealthier world for the future generation. The search for locating solu-tion to environmental problems can be found here. 21st century hasbeen given the name Century of Environment and The Northern GreenExpo has been an aid towards it.For further information, please contact the Show Office at (651) 633-4987American Society of Landscape Architects: 612/339-0797

NATIONAL PAVEMENT EXPO 2015JANUARY 28-31, 2015Music City Center, NASHVILLE, TNTop 5 Reasons to Attend National Pavement Expo:CASE Equipment Giveaway: You could win a DV26 Vibratory DoubleDrum Roller.FOUR-DAY Conference: Learn from the construction industry’s bestand brightest.Exhibit Hall: See the latest equipment from some of the constructionindustry’s biggest names, including BOMAG, CASE Construction,Elgin, Gradall, Kasi, Leeboy, Schwarze, Weiler, and many more. Roundtable discussions: Learn – for free – from contractors aroundthe country.NASHVILLE: Enjoy Music City’s live performances, Southern hospi-tality and unbelievable cuisine.

Regardless of your role in the construction industry, attendingNational Pavement Expo will broaden your understanding of pavingand pavement maintenance…with plenty of fun and camaraderie toboot. For more information on this event, contact AC BusinessMedia, Burnsville, MN at 508/743-8514 or 877/398-6945.

POWER SHOW OHIO45th Annual Power Show OhioNEW DATES!!!Thursday, January 29~~~Friday, January 30~~~Saturday, January31, 2015Ohio Expo Center, Columbus, OhioA complete power equipment industry exhibition!What is on display? On display is new agricultural, construction, andoutdoor power equipment from more than 500 companies. Where isthe Power Show Ohio held? The show is held in Columbus, Ohio atthe Ohio Expo Center, home of the Ohio State Fair. Two buildings willbe used, the Celeste Center and the Bricker Building. Power ShowOhio is sponsored by the Ohio-Michigan Equipment DealersAssociation, P. O. Box 68, Dublin, OH; phone: (614) 889-1309 email: [email protected].

CENTS MARKETPLACE EXHIBITIONGreater Columbus Convention Center, Columbus, OHIODates: January 7 thru 9, 2015Organized by Ohio Nursery & Landscape AssociationThe CENTS Marketplace exhibition is one of the significant events thatwill be taking place for a period of three days. This show is organ-ized with the purpose of increasing the buying and selling power ofthe products in the green industry. This show platform will serve asan ideal platform for promoting the green industry products. Theexhibitors will produce a huge range of products in the exhibition tomake the visitors aware of latest products and technology. TheCENTS Marketplace will be an effective place for the exhibitors toincrease their business opportunities and create new contacts. Theshow will also arrange for a direct communication between exhibitorsand the visitors. For more information on this event, please contactOhio Nursery & Landscape Association at 800/825-5062 [email protected].

AED SUMMIT & CONDEX 2015 / Associated Equipment DistributorsDATES: FEBRUARY 10, 2015 – FEBRUARY 13, 2015VENUE: Orlando World Center Marriott

8701 World Center DriveOrlando, FL (Florida) 32821Phone: 407/239-4200

. Introduce your company, products or services to potential new dis-tributors. Enhance your brand image or identity. Improve your competitive position in the marketplace. Network with your current distributors. Introduce new products or services to existing distributors

Each year the industry’s top executives gather at AED Summit & CON-DEX trade show – the only show in the industry dedicated strictly toequipment distribution. Whatever happens this year, one fact isunchanged: Relationships are where business begins, and AED isstill the only place where manufacturers and service suppliers havea unique opportunity to establish business relationships with suc-cessful construction equipment distributors. Success is all aboutpartners – and CONDEX is your chance to create dialogue and buildsound business relationships. For more information, contactAssociated Equipment Distributors, Inc. at 630/574-0650.

WORLD OF CONCRETEDates: February 3 – 6, 2015Place: Las Vegas Convent ion Center, Las Vegas, NVTry your hand at the year’s newest products. It’s official! World ofConcrete 2015 will be the largest show in over six years with630,000+ net square feet of indoor and outdoor exhibit space andover 1,300 exhibitors. Come to the World of Concrete, roll up yoursleeves and try your hand at the year’s newest products, equipmentand services. Technology, training, resources and ideas – zoom inat the industry’s only annual international event designed specifical-ly for commercial concrete and masonry professionals. WOC fea-tures innovative tools, construction machinery, construction equip-ment, safety training courses and training, technologies and unlimit-ed networking opportunities to give you new ways to sustain andgrow your business. World of Concrete is considered by many to beone of the top shows in the industry. The outdoor exhibit areas,including the hugely popular Artistry in Decorative Concrete, makeWorld of Concrete THE ONLY event to attend in 2015! For more infor-mation: www.worldofconcrete.com

National Utility Contractors Association of Ohio (NUCA)NUCA of OHIOGREAT LAKES TRENCHLESS ASSOCIATION CONVENTION & TRAINING EXPOJoin us on Thursday, Friday & Saturday, February 19-21, 2015Kalahari Resort in Sandusky, OhioThree Tracks of Education; Specialty Certifications and Mini-MudSchool!Your registration includes:. All Friday & Saturday sessions and materials, breaks and socialevents. An agenda with quality training sessions, interesting speakersand the opportunity to interact with top industry technicians. Outstanding networking opportunities. Delicious breakfasts, lunches and snacks. Exposition of Trenchless products and accessories. Annual Saturday evening membership dinner with entertainment. Reduced Kalahari room rates that includes up to 4 daily waterpark passes. Activities for family fun, adult fun and kid fun! For more information, please contact NUCA of Ohio at 888/294-0084.AGC CONVENTION

96th Annual AGC Convention DATE: March 18-20, 2015PLACE: San Juan, Puerto RicoJoin us for the Convention!!! Business Suit OptionalNo one knows the future, but gaining a comprehensive view of whereyou are, where you are going and where you need to be can onlystrengthen the educated decisions construction professionals have tomake every day.Take the opportunity to step outside, analyze the direction yourorganization is heading, listen and compare that with other con-struction professionals and take that perspective back to your organ-ization.As our premier event each year, the AGC Convention and Technology& Construction Solutions Expo is the ideal opportunity to see every-thing AGC can do for you and your business. This year’s conventionwill include professional development sessions covering:. Workforce Development. Drones in Construction. Leadership. Risk Management. Quality Control. Marketing. Much More! For more information, please contact The Associated GeneralContractors of America. General Inquiries: 703/548-3118AGC Store Inquiries: 800/242-1767Convention.AGC.org

AEM MEDIA SERVICES presents BAUMA CONEXPO AFRICA BAUMA CONEXPO AFRICA will be held September 15 to 18, 2015at the Johannesburg Expo Centre in Johannesburg, South Africa.The show is owned and organized by the Association of EquipmentManufacturers (AEM) and Messe Munchen International (MMI).Exhibit space sales are now open for Bauma ConExpo Africa 2015.Companies applying for space by February 12, 2015, will be includ-ed in the first round of booth assignments. After that date, applica-tions will be accepted on a first come, first served basis. World-class exhibition in important marketplaceExhibitors at the last show pointed out the high quality of attendees.The 2015 show venue is the country’s largest purpose-built exhibi-tion and events facility, offering a modern space and services. And,show participants benefit from the global experience and customerservice of AEM, organizer of CONEXPO-CON/AGG, and MMI, organ-izer of BAUMA. BAUMA CONEXPO AFRICA has broad-based supportfrom leading industry groups in Africa and worldwide. After 2015,the show goes to a three-year cycle in response to local and inter-national industry input. AEM is show exhibitor contact for theAmericas: visit the show website: www.bcafrica.com for moredetails. Contact AEM at [email protected] or by telephone +1-414-298-4150/ toll free U.S. and Canada 800-867-6060.

BusinessCalendar

economy. Among the sectors thatbenefit the most are service indus-tries such as business, education,health and leisure, and hospitality.The study also finds that 62 per-

cent of the jobs created from feder-al highway and mass transit invest-ments are outside the constructionindustry. Over one-third of all jobscreated also are in service indus-tries like business, education,health and leisure, and hospitality.“The study shows that invest-

ment in transportation infrastruc-ture has a positive impact on everymajor sector of the U.S. economy.These far reaching economic bene-fits contribute to economic growthby improving the nation’s capitalstock, which enables increasedeconomic activity,” said KarenCampbell, a senior consultant atIHS, who produced the report withBob Brodesky, a transportationexpert and senior manager in theIHS Industry Consulting Group.Current federal highway and

public transit investment, which is

about $50 billion annually, gener-ates an average $31 billion in per-sonal income tax receipts per yearand $6 billion in federal corporatetax receipts per year due toincreased economic activity,according to the analysis. Thisamounts to 74 cents returned onevery dollar invested.IHS noted that current levels of

federal investment on highway andpublic transit spending contributenearly one percent to the U.SGross Domestic Product (GDP),the measure of goods and servicesproduced by the economy. Amongthe other economic benefits:• Every $1 in federal highway

and mass transit investmentincreases the nation’s GDPbetween $1.80 to $2.00• Current federal transportation

spending contributes on average$410 to real income per householdeach year.IHS also studied the resulting

impacts from five percent annualincreases in federal highway andtransit investment from 2014-2019, and found the added invest-ment would create:• Between 78,000 and 122,000

new jobs by 2019 (includes direct,indirect, and induced jobs);• An annual average increase of

$40 in real household income each

year;• An additional $9.6 billion in

real GDP for the U.S. economy by2019; and• On average an additional $4.9

billion per year in federal, state andlocal government revenue.“Federal transportation spend-

ing expands the capital stock of theU.S. economy, drives the produc-tion and delivery of goods andservices, and positively affectsbusiness and household incomes,”the study’s authors write. “It alsoenhances the transportation sys-tem’s operational capacity byreducing travel times and costs.This results in greater accessibility

for individuals, households andbusinesses, more efficient deliveryof goods and services, improvedlifestyles, and standards of living,and safer roadways.”The members of the

Transportation ConstructionCoalition (TCC), which commis-sioned the study, said they wouldsend it to all congressional officesto help them better understand theurgency for a permanent solutionfor the Highway Trust Fund wellbefore May 2015, when fundingfor the highway and transit pro-gram will once again be in jeop-ardy for the sixth time since 2008.The TCC is issuing this reportahead of the upcoming congres-sional recess, when many coalitionmembers will be meeting withtheir elected officials at home.For more information, visit

www.transportationconstruction-coalition.org.




mentguide.com.)

“The study shows that investment in transportation infrastructure has apositive impact on every major sector of the U.S. economy. These farreaching economic benefits contribute to economic growth by improvingthe nation’s capital stock, which enables increased economic activity.”

Karen CampbellIHS

Transportation Investment Positively Impacts Many SectorsIHS from page 1


Western JANUARY 27–29

WINTER SALEDON’T WAITTO BUY YOUR EQUIPMENT

®

Period.

WINTER SALEWINTER SALEWINTER SALEWINTER SALEJANU

WINTER SALEY 27–ARRY 27–29JANU

WINTER SALEY 27–29

y taay tt wsee bhTww

sl ulend sy auo by tm | 8oc.tenalpnori.ww

. tnepmiuqd ees P2645.334.88m | 8

d.ioreP


Flaska JCB Customers Show Skills at Backhoe Rodeo

Chelsea Rossini (L) and Amanda Yotter of Herk & Associates, attendedFlaska JCB’s open house. Herk & Associates specializes in recruiting salesand management talent for the heavy equipment industry.

(L-R): Bob Canady along with customersDerek and Darrin Harper of HarperUnderground Utilities of Litchfield Parke,Ariz., and Ben Coleman and Mason Smith of JCBCorporate, catch up during the open house.

The crowd enjoys the Dancing Diggers, which perform at JCB eventsaround the country.

The Lone Survivor Foundation, whichbenefits wounded soldiers and theirfamilies, received $10 for each signa-ture on the banner. Karissa Ma, a vol-unteer of Lone Survivor, was on handto promote the organization and gath-er signatures.

Michael Chandler, regional business manager ofJCB, puts a 3CX backhoe loader through itspaces as part of the Dancing Diggers exhibition.

David Abbott of ABBCO Sign Group inGlendale, Ariz., gets a feel for the JCB 225SSL skid steer loader.

Delbert White of the AK-Chin Indian Community inMaricopa, Ariz., competes in the backhoe rodeo atFlaska JCB’s recent open house.

Sherald Remmich of Griffin Construction,Billings, Mont., took a close look at the 300TEcco.

Flaska JCB of Phoenix, Ariz., held anopen house and “Backhoe Rodeo” onNov. 21, at its Buckeye Road location.

Highlights of the event included theDancing Diggers backhoe exhibition andthe JCB HMEE, an armored backhoe

loader for military applications.Bob Canady, Flaska JCB sales manager,

hosted the event. Ben Coleman, generalmanager of backhoe loader sales, JCB,was on hand along with several other JCBcorporate representatives. A major focus

of the event was to introduce the 3CXbackhoe loader, which Coleman called“one of the best values in the industry.”





Ritchie Bros. Conducts Multi-Million Dollar Los Angeles Sale

Polo Sobalbarro of Los Angeles wasbidding on the Deere 672A and othermachines for export to Nicaragua.

Jim Emmett of MainlineEquipment Rentals and Sales inClovis, Calif., stops to look at aCat 345C excavator.

David Schwaid (R), president, andDavid Novak, equipment manager,both of Ecco Equipment, were biddingon the Cat 349E excavator. Ecco has18 rental locations and is based inSanta Ana, Calif.

Components of the Hitachi EX1900-6 front shovel excavator that sold for $1.6 million.

Gerald Fix, an estimator of SBIUnderground Utilities, Upland, Calif.,checks out an Ingersoll Rand doubledrum roller. SBI builds substations forCon Edison.

Don Scarsella of Scarsella Brothers Contracting in Seattle considerswhether he’ll add another Cat 8D to his fleet, which currently has eight.

The Cat 777F rigid frame mining trucks ondisplay for bidders at the Los Angeles

area Ritchie Bros. auction.

More than 3,400 bidders participated online and in person at RitchieBros. Auctioneers’ multi-million dollar unreserved public equip-ment auction in Los Angeles, Calif., on Dec. 11, 2014.

Bidders came from 60 countries, including 49 U.S. states. Approximately49 percent of the equipment was sold to out-of-state buyers, from as far awayas Vietnam, Uganda, New Zealand, Saudi Arabia, the Philippines and Jordan.Online bidders purchased 34 percent of the equipment sold (by dollar value).The auction featured close to 2,500 equipment items, including more than

200 truck tractors and more than 90 pickup trucks, as well as a large selectionof excavating equipment, wheel loaders, motor scrapers, rock trucks, crawlertractors, and more. Two Cat 777F rigid frame mining trucks and a Hitachi EX1900-6 front

shovel excavator were among the items sold.(This story also can be found on Construction Equipment Guide’s Web site at


A Volvo L250G wheel loader joins theprocession of loaders making theirway to the ramp at Ritchie Bros. LosAngeles auction.


Your Best Choice. WHEN BUYING OR SELLING ANY MAKE, MODEL, SIZE COLOR OR CONDITION

That’s right, this year, Cat Auction Services and IronPlanet will jointly hold a three-day auction delivering the best prices of the season!This event will be a live, onsite unreserved auction in Orlando with IronPlanet’s 1.2 million global users invited to join online as well.

WHY WE ARE YOUR BEST CHOICE• We offer the best auction experience in Florida

– for both buyers and sellers

• Global marketing exposure for your equipment

• Top quality iron

• Unequalled offering of late model, low hour machinery

• Our Leaderboard technology

• Onsite & online bidding platforms

• Not just Cat – we offer all makes & models

• Financing options onsite

• Equipment is inspected and videotaped

• Equipment Protection Plans (EPP)

• Cat Product Link - Free on qualifying machines

• The best site layout and buying environment in Florida!

CAT AUCTION SERVICES 866.779.2361 [email protected] www.catauctions.com

Consign today! We’ll sell it onsite or online from your yard.

THE NAMES YOU’VE GROWN TO TRUST.

Holding a Joint Florida Sale

February 11-13

&

WHY WE ARE YOUR BEST CHOICEe offer the best auction experience in Florida W•


WHY WE ARE YOUR BEST CHOICEe offer the best auction experience in Florida


WHY WE ARE YOUR BEST CHOICEe offer the best auction experience in Florida

Not just Cat – we offer all makes & models•

Financing options onsite

Not just Cat – we offer all makes & models


Not just Cat – we offer all makes & models


Global marketing exposure for your equipment•

op quality iro T Top quality iron•

Unequalled offering of late model, low hour machinery•

Our Leaderboard technology•

Onsite & online bidding platforms•


Global marketing exposure for your equipment

op quality iron

Unequalled offering of late model, low hour machinery

Our Leaderboard technology

Onsite & online bidding platforms

Global marketing exposure for your equipment

Unequalled offering of late model, low hour machinery

Financing options onsite•

Equipment is inspected and videotaped•

Equipment Protection Plans (EPP)•

Cat Product Link - Free on qualifying machines•

The best site layout and buying environment in Florida!•


Equipment is inspected and videotaped

Equipment Protection Plans (EPP)

Cat Product Link - Free on qualifying machines

The best site layout and buying environment in Florida!

Cat Product Link - Free on qualifying machines

The best site layout and buying environment in Florida!

B our B YYour Best Choice.T A CAAT AUCTION SERVICES

Best Cho est ChoT AUCTION SERVICES

oice. oice. W W AN

866.779.2361 in

WHEN BUYING OR SELLINGWHEN BUYING OR SELLINGNY MAKE, MODEL, SIZE COLOR OR CONDITIONNY MAKE, MODEL, SIZE COLOR OR CONDITION

[email protected]

OR S LLING O SELLING COLOR O ONDITION CO R OR CONDITION

[email protected] .catauctions.com www

.catauctions.com


ADVERTISER INDEX

The Advertisers Index is printed as a free editorial service to our advertisers and readership. Construction Equipment Guide is not responsible for errors or omissions.

A E D ......................................................................................12

ATI CORPORATION/LEVEL-BEST ......................................11

ATLAS COPCO ......................................................................11

BAIR PRODUCTS INC ..........................................................15

BARGAINS..............................................................................49

BLANCHARD MACHINERY ..................................................15

BLUELINE CONST EQUIP & SERVICES ............................13

BOBCAT COMPANY ............................................................22

BOMAG ..................................................................................43

CASE CONSTRUCTION ......................................................28

CAT AUCTION SERVICES

ORLANDO FL 02/13/15..................................................57

CLASSIFIEDS ........................................................................49

CONSTRUCTION EQUIPMENT GUIDE

CEG SCALE MODELS ..................................................14

CEG VALUE ADDED......................................................46

AUCTION PROFILE PROMO........................................48

SHOPPING FOR USED EQUIPMENT..........................40

CEG WANTED................................................................50

FL AUCTION PROMO....................................................55

DITCH WITCH WEST ......................................................30,31

DOMINION EQUIPMENT PARTS ........................................12

ECCO EQUIPMENT ................................................................8

EFFICIENCY SHORING AND SUPPLY ................................11

ESCO CORP ........................................................................34

FLANGE LOCK ......................................................................13

HENDRIX MACHINERY LLC ..................................................3

HITACHI CONSTRUCTION MACHINERY ..........................35

HYUNDAI CONSTRUCTION EQUIPMENT ......................7,37

IRONPLANET

01/27-29/14 WINTER SALE ..........................................53

JCB INC ................................................................................19

JFW EQUIPMENT INC ..........................................................42

JOHN DEERE ........................................................................20

JOHN DEERE SKID STEER ................................................29

KAWASAKI ............................................................................23

KOBELCO CONST MACH AMER LLC ..................................5

KOMATSU AMERICA CORP ..........................................38,39

LEEBOY ................................................................................44

LIEBHERR CONSTRUCTION EQUIPMENT ..........................6

LIUGONG CONSTRUCTION MACHINERY ........................33

NPK CONSTRUCTION EQUIPMENT INC ..........................60

OKADA AMERICA ................................................................10

ROAD BUILDERS MACHINERY & SUPPLY ....................9,34

ROAD MACHINERY CO ........................................................2

SAKAI AMERICA INC ............................................................47

TAKEUCHI ............................................................................25

TOWMASTER ........................................................................36

VOLVO CONST EQUIP & SVCS (VCES) ............................59

WACKER NEUSON ..............................................................21

WIRTGEN AMERICA ............................................................45

YANMAR AMERICA ..............................................................27

To read articles about these CEG advertisers, visit www.constructionequipmentguide.com


Battle Creek, MI269.965.1269Byron Center, MI616.878.7450Kentwood, MI616.698.2960Lansing, MI517.272.5033Muskegon, MI231.798.8754New Hudson, MI248.356.5200Romulus, MI734.641.8238Saginaw, MI989.752.9400Sterling Hts, MI586.977.6000Traverse, MI231.943.3700Wixom, MI248.449.6700Wixom, MI(Cons. Division)248.356.5200Zeeland, MI616.748.4108

Alsip, IL708.389.7700East Peoria, IL309.694.4455Rockford, IL815.227.0555Springfield, IL217.789.0351Villa Park, IL630.530.7600

Buford, GA678.318.9500Forest Park, GA770.319.0074Savannah, GA912.964.8079

Asheville, NC828.687.0620Charlotte, NC704.596.8283Greenville, NC252.754.5280Raleigh, NC919.661.8710Bismarck, ND701.250.4882Fargo, ND701.271.2360Minot, ND701.250.4882

Charleston, SC843.414.1120Columbia, SC803.791.0740Piedmont, SC864.704.1060

Chattanooga, TN423.308.7940Knoxville, TN865.525.1845

Evansville, IN812.867.6661Fort Wayne, IN260.482.3681Indianapolis, IN317.247.9125Corbin, KY606.528.9440Louisville, KY502.456.4050Prestonsburg, KY606.874.2104St. Louis, MO314.487.8925

McALLISTEREQUIPMENT CO.

Contact your local dealer:

Volvo Construction Equipment

* Ask about our Fuel Efficiency Guarantee by contacting a Volvo dealer near you, or visit volvoce.com/NAFuel to learn more.

YOU CHOSE GUARANTEED* FUEL EFFICIENCYWITH EXCEPTIONAL DEALER SUPPORT.

Smart Works.

POWER EQUIPMENTCOMPANYwww.power-equip.com

500 E. 62nd Ave.Denver, CO 80216303-288-6801Fax: 303-288-6809

2329 River RoadGrand Junction, CO 81505970-243-0722Fax: 970-243-0726

2940 E. Las Vegas St.Colorado Springs, CO80906719-392-1155Fax: 719-390-9604

8806 E. US Hwy. 34Johnstown, CO 80534970-669-6209Fax: 970-669-6280

ARNOLD MACHINERY CO.www.arnoldmachinery.com

2975 West 2100 SouthSalt Lake City, UT 84119801-972-4000Fax: 801-975-9434

3330 N. Yellowstone Hwy.Idaho Falls, ID 83401208-523-0822Fax: 208-523-9918

300 East Overland Rd.Meridian, ID 83642208-887-6000Fax: 208-887-6013

464 Washington St. SouthTwin Falls, ID 83301208-733-1715Fax: 208-734-6924

1650 East Greg St.Sparks, NV 89431775-356-1511Fax: 775-356-0517

4136 Donovan WayLas Vegas, NV 89030702-642-9000Fax: 702-642-8808

4323 East Winslow Ave.Phoenix, AZ 85040602-414-1900Fax: 602-414-1904

3350 East Gas Rd.Tucson, AZ 85714520-294-7677Fax: 520-294-7670


5151 Cash RoadDallas, TX 75247214-819-4100Fax: 214-819-4102

Austin1150 Old W. Settlers Blvd.Round Rock, TX 75681512-388-2529877-851-1026Fax: 512-388-1781

Buffalo7387 Hwy. 164Buffalo, TX 75831903-322-5602Fax: 903-322-5605

Carmine17391 US Hwy. 290 WestCarmine, TX 78932979-278-3570Fax: 979-278-3573

Dallas3900 HalifaxDallas, TX 75247214-819-4100800-227-6626Fax: 214-819-4102

Ft. Worth1350 N. E. Loop 820Ft. Worth, TX 76106817-626-2288866-966-4602Fax: 817-626-8983

Houston8450 Breen Dr.Houston, TX 77064713-937-3005800-865-6998Fax: 713-937-7541

Longview2116 E. Loop 281Longview, TX 75605903-758-5576Fax: 903-758-3079

Rio Grande Valley312 Park St.Mercedes, TX 78570956-565-0100Fax: 956-565-1765

San Antonio1042 S. E. Loop 410San Antonio, TX 78220210-648-4600800-966-4601Fax: 210-648-1282

ROL Remote OilfieldLocation3610 Interstate 37Three Rivers, TX 78071361-254-2317

Contact your local dealer:

west 26 2014

Documents

airport page

cegmeeker airport

new runway

runway ties

runway safety area

expired tax

tax breaks expired

construction newspaper