wera dl brochure - cabac.com.au · 1212 1313 kraftform plus - series 100 vde the safety screwdriver...
TRANSCRIPT
ToolsScrewdriving
for electricianS
for work on live wiring
2 32 3For more information contact your
CABAC sales representativeFor more information contact your
CABAC sales representative
Kraftform Stainless VDE .......................................................................... 3
Kraftform Plus - Series 100 VDE ............................................................. 6
Kraftform Kompakt VDE .......................................................................18
Kraftform Kompakt VDE Torque ...........................................................22
Kraftform Comfort VDE ........................................................................29
Accessories ...........................................................................................32
Kraftform Kompakt 20 Series ...............................................................33
Kraftform Plus Series 900.... ...................................................... ...........34
contents
Unfortunately, stainless steel does get damaged by rust – just not in the way you imagine!Stainless steel looks good, and its natural properties do keep rust at bay.
However, if screwdriving jobs on stainless steel fixings or fasteners are carried out with conventional carbon steel tools, steel particles from these tools remain as residue in the screw head and rust when exposed to oxygen.
This is known as extraneous rust.
This ruins the stunning aesthetic properties of stainless steel.
Solution to the rust problem: screw stainless steel fixings with stainless steel! Wera stainless steel tools are manufactured out of stainless steel so unsightly rust can be avoided.
Kraftform Stainless vdeStainless Steel tools
3160 i/7 Screwdriver Set PlUS rack
DESCRIPTION: The safety screwdriver for stainless steel screws, Lasertip blade, Voltage Tester PLUS Rack
APPLICATION: Slotted and Phillips screwsCONTENTS: Stainless steel, 7-piece set and rack in display carton
PART NO. Product / contents Pu
WERA022728 3160 i Vde 1x0, 5x3, 0x80†; 1x0, 6x3, 5x100;
1x0, 8x4, 0x100; 1x1, 0x5, 5x1251
3162 i Vde 1xPH 1x80; 1xPH 2x100
3247 1x0, 5x3, 0x70
†Without Lasertip
4 54 5For more information contact your
CABAC sales representativeFor more information contact your
CABAC sales representative
Kraftform Stainless vdeStainless Steel tools
3162 i vde PH insulated Screwdriver for Phillips screws
APPLICATION: Phillips screws BLADE: Insulated, individually tested as per IEC 60900DESIGN: Lasertip, stainless steel for minimising rustHANDLE: Kraftform with non-roll feature, multi-component
Part no MM MM Pu
WERA022733 PH1PH 1 80 98 3 1/8” 5
WERA022734 PH1PH 2 100 105 4“4” 5
Kraftform Stainless vdeStainless Steel tools
3160i vde insulated Screwdriver for Slotted Screws
APPLICATION: Slotted screws BLADE: Insulated, individually tested as per IEC 60900DESIGN: Conical edge, Lasertip, stainless steel for minimising rustHANDLE: Kraftform with non-roll feature, multi-component
Part no MM MM MM MM Pu
WERA022729† 0,5 3,0 80 81 1/8” 3 1/8” 10
WERA022730 0,6 3,5 100 81 9/64" 4" 10
WERA022731 0,8 4,0 100 98 5/32" 4" 10
WERA022732 0,8 5,5 125 98 7/32" 5" 10
†without Lasertip
How to prevent the screwdriver from slipping out of the screw headIt happens time and time again that the tip slips out of the screw head when screwdriving, sometimes damaging valuable surfaces or even causing injury.
The tips of the Wera Lasertip screwdrivers are microscopically roughened by means of a laser.
This rough surface literally “bites” itself firmly into the screw head. Slipping out becomes a thing of the past.
6 76 7For more information contact your
CABAC sales representativeFor more information contact your
CABAC sales representative
APPLICATION: Slotted screws
BLADE: Insulated, individually tested as per IEC 60900
DESIGN: Conical tip, Lasertip
HANDLE: Kraftform with non-roll feature, multi-component
code mm mm mm mm
WERA006100 † 0,4 2,5 80 81 3/32" 3 1/8" 10
WERA006105 † 0,5 3,0 100 81 1/8" 4" 10
WERA006110 0,6 3,5 100 81 9/64" 4" 10
WERA006115 0,8 4,0 100 98 5/32" 4" 10
WERA006116 0,8 4,0 150 98 5/32" 6" 5
WERA006120 1,0 5,5 125 98 7/32" 5" 10
WERA006121 1,0 5,5 200 98 7/32" 8" 5
WERA006125 1,2 6,5 150 105 1/4" 6" 10
WERA006126 1,2 6,5 200 105 1/4" 8" 5
WERA006130 1,2 8,0 175 112 5/16" 7" 5
WERA006135 1,6 8,0 200 112 5/16" 8" 5
WERA006140 1,6 10,0 200 112 3/8" 8" 5
† without Lasertip
Kraftform Plus - Series 100 vdethe Safety Screwdriver when working with live wiring
160 i vde insulated Screwdriver for Slotted Screws
Kraftform Plus - Series 100 vdethe Safety Screwdriver when working with live wiring
160 iS/5 rack Screwdriver Set
code mm mm mm mm
WERA006440 0,6 3,5 100 81 9/64" 4" 10
WERA006441 0,8 4,0 100 98 5/32" 4" 10
WERA006442 1,0 5,5 125 98 7/32" 5" 10
APPLICATION: Slotted screws and actuating tool for spring terminals
BLADE:Reduced blade diameter with integrated protective insulation, allows sunken screws and spring elements to be accessed and actuated, individually tested as per IEC 60900
DESIGN: Conical blade, zinc-phosphated
HANDLE: Kraftform with non-roll feature, multi-component
DESCRIPTION:The safety screwdriver with reduced blade diameter and rack
APPLICATION: Slotted and Phillips screws
APPLICATION CONTENT: 5-piece set and rack in display cartonKraftform Plus - Series 100 vdethe Safety Screwdriver when working with live wiring
160 iS vde insulated Screwdriver with reduced blade diameter for slotted screws
extra slim
codeWERA321000 1160 i Vde 1 x 0,6x3,5x100;
1 x 0,8x4,0x100; 1 x 1,0x5,5x125
162 i PH Vde 1 x PH 1x80; 1 x PH 2x100
extra slim
8 98 9For more information contact your
CABAC sales representativeFor more information contact your
CABAC sales representative
Application: Phillips screwsBlade: Insulated, individually tested as per IEC 60900Design: LasertipHandle: Kraftform with non-roll feature, multi-component
Kraftform Plus - Series 100 vdethe Safety Screwdriver when working with live wiring
162 i PH vde insulated screwdriver for Phillips screws
Application: Phillips screwsBlade: Reduced blade diameter with integrated protective insula-
tion, allows sunken PH screws to be accessed and actuated, individually tested as per IEC 60900
Design: Blade zinc-phosphatedHandle: Kraftform with non-roll feature, multi-component
code mm mm
WERA006450 PH 1 80 98 3 1/8" 5
WERA006451 PH 2 100 105 4" 5
Kraftform Plus - Series 100 vdethe Safety Screwdriver when working with live wiring
162 iS PH vde insulated screwdriver with reduced blade diameter for Phillips screws
code mm mm
WERA006150 † PH 0 80 81 3 1/8" 5
WERA006152 PH 1 80 98 3 1/8" 5
WERA006153 PH 1 150 98 6" 5
WERA006154 PH 2 100 105 4" 5
WERA006159 PH 2 200 105 8" 5
WERA006156 PH 3 150 112 6" 5
WERA006158 † PH 4 200 112 8" 2
† without Lasertip
why is a vde screwdriver safe? A dielectric strength test under a 10,000 volt load in a water bath is the only way of reassuring users that their screwdrivers have been exhaustively tested for their most important feature: their insulation. Each individual Wera VDE screwdriver is subjected to this test to guarantee safe working up to 1,000 volts as per IEC 60900.
the Kraftform Handle The outstanding design of the Kraftform handle ensures that it fits perfectly into the hand, preventing hand injuries such as blisters and calluses.
The hard materials used for the handle ensure rapid hand repositioning, without any danger of the skin “sticking” to the handle. The softer “anti-slip” zones enable the low-loss transfer of high forces – resulting in less screwdriving effort being required.
extra slim
10 1110 11For more information contact your
CABAC sales representativeFor more information contact your
CABAC sales representative
165 iS PZ vde insulated screwdriver with reduced blade diameter for Pozidriv screws
Application: Suitable for Pozidriv*) screwsBlade: Insulated, individually tested as per IEC 60900Design: LasertipHandle: Kraftform with non-roll feature, multi-component
code mm mm
WERA006160 † PZ 0 80 81 3 1/8" 5
WERA006162 PZ 1 80 98 3 1/8" 5
WERA006163 PZ 1 150 98 6" 5
WERA006164 PZ 2 100 105 4" 5
WERA006165 PZ 2 200 105 8" 5
WERA006166 PZ 3 150 112 6" 5
WERA006168 † PZ 4 200 112 8" 2
† without Lasertip*) Pozidriv = reg. trademark of European Industrial Service Ltd.
Application: Suitable for Pozidriv*) screwsBlade: Reduced blade diameter with integrated protective insula-
tion, allows sunken PZ screws to be accessed and actuated, individually tested as per IEC 60900
Design: Blade zinc-phosphatedHandle: Kraftform with non-roll feature, multi-component
code mm mm
WERA006460 PZ 1 80 98 3 1/8" 5
WERA006461 PZ 2 100 105 4" 5
*) Pozidriv = reg. trademark of European Industrial Service Ltd.
Kraftform Plus - Series 100 vdethe Safety Screwdriver when working with live wiring
165 i PZ vde insulated screwdriver for Pozidriv screws
code mm mm
WERA006182 TX 6 80 81 3 1/8" 5
WERA006184 TX 8 80 81 3 1/8" 5
WERA006170 TX 10 80 81 3 1/8" 5
WERA006172 TX 15 80 98 3 1/8" 5
WERA006174 TX 20 80 98 3 1/8" 5
WERA006176 TX 25 100 105 4" 5
WERA006178 TX 30 100 105 4" 5
WERA006179 TX 40 150 112 6" 5
Application: TORX® socket screwsBlade: Insulated, individually tested as per IEC 60900Design: Zinc-phosphatedHandle: Kraftform with non-roll feature, multi-component
Kraftform Plus - Series 100 vdethe Safety Screwdriver when working with live wiring
167 i vde insulated screwdriver for torX® screws
extra slim
extra slim
12 1312 13For more information contact your
CABAC sales representativeFor more information contact your
CABAC sales representative
Kraftform Plus - Series 100 vdethe Safety Screwdriver when working with live wiring
168 i vde insulated screwdriver for square socket head screws
code mm mm
WERA004780 # 1 80 98 3 1/8" 5
WERA004783 # 1 150 98 6" 5
WERA004781 # 2 100 105 4" 5
WERA004784 # 2 200 105 8" 5
Application: Square socket head screwsBlade: Insulated, individually tested as per IEC 60900Design: Zinc-phosphatedHandle: Kraftform with non-roll feature, multi-component
Kraftform Plus - Series 100 vdethe Safety Screwdriver when working with live wiring
190 i vde insulated nutdriver
code mm mm mm mm
WERA005300 5,5 125 98 11,0 5" 5
WERA005305 6,0 125 98 12,0 5" 5
WERA005310 7,0 125 105 14,0 5" 5
WERA005315 8,0 125 105 15,0 5" 5
WERA005320 9,0 125 105 16,0 5" 5
WERA005325 10,0 125 112 17,0 5" 5
WERA005330 11,0 125 112 19,0 5" 5
WERA005335 12,0 125 112 20,0 5" 5
WERA005340 13,0 125 112 21,0 5" 5
Application: Hexagon headed bolts, screws and nutsBlade: Insulated, individually inspected as per IEC 60900Design: Zinc-phosphatedHandle: Kraftform with non-roll feature, multi-component
Screwdriver for square socket head screws The various dimensions of the screwdrivers for square socket head screws (also known as Robertson screws) can be seen from the colour of the screwdriver handles:
# 1 = Green
# 2 = Red
14 1514 15For more information contact your
CABAC sales representativeFor more information contact your
CABAC sales representative
Kraftform Plus - Series 100 vdePlusMinus for work on terminal screws
165 i PZ/S # 1+2 Screwdriver set
codeWERA073600 1162 i PH/S VDE 1 x # 1x80; 1 x # 2x100
Application: PlusMinus screws (Phillips/slotted)
Content: 2-piece set in display pack
Application: PlusMinus screws (Pozidriv*)/slotted)
Content: 2-piece set in display pack
codeWERA073601 1165 i PZ/S VDE 1 x # 1x80; 1 x # 2x100
*) Pozidriv = reg. trademark of European Industrial Service Ltd.
Kraftform Plus - Series 100 vdePlusMinus for work on terminal screws
162 i PH/S # 1+2 Screwdriver set
PlusMinus / McB screwdriversFor the use in terminal blocks, control cabinets, switches, relays, sockets etc. Combination of slotted and Pozidriv or slotted and Phillips.
16 1716 17For more information contact your
CABAC sales representativeFor more information contact your
CABAC sales representative
162 iS PH/S vde insulated screwdriver with reduced blade diameter for PlusMinus screws (Phillips/slotted)
Application: PlusMinus screws (Phillips/slotted)Blade: Reduced blade diameter with integrated protective insula-
tion, allows sunken PlusMinus screws to be accessed and actuated, individually tested as per IEC 60900
Design: Combination profile Phillips/slotted, blade zinc-phosphatedHandle: Kraftform with non-roll feature, multi-component
code mm mm
WERA006455 # 1 80 98 3 1/8" 5
WERA006456 # 2 100 105 4" 5
165 iS PZ/S vde insulated screwdriver with reduced blade diameter for PlusMinus screws (Pozidriv/slotted)
Application: For PlusMinus screws (Pozidriv*)/slotted)Blade: Reduced blade diameter with integrated protective insula-
tion, allows sunken PlusMinus screws to be accessed and actuated, individually tested as per IEC 60900
Design: PlusMinus (Pozidriv*)/slotted), blade zinc-phosphatedHandle: Kraftform with non-roll feature, multi-component
code mm mm
WERA006465 # 1 80 98 3 1/8" 5
WERA006466 # 2 100 105 4" 5
*) Pozidriv = reg. trademark of European Industrial Service Ltd.
Application: PlusMinus screws (Phillips/slotted)Blade: Insulated, individually tested as per IEC 60900Design: PlusMinus (Phillips/slotted)Handle: Kraftform with non-roll feature, multi-component
code mm mm
WERA006380 # 1 80 98 3 1/8" 5
WERA006381 # 2 100 105 4" 5
Kraftform Plus - Series 100 vdePlusMinus for work on terminal screws
162 i PH/S vde insulated screwdriver for PlusMinus screws (Phillips/slotted)
Application: For PlusMinus screws (Pozidriv*)/slotted)Blade: Insulated, individually tested as per IEC 60900Design: PlusMinus (Pozidriv*)/slotted)Handle: Kraftform with non-roll feature, multi-component
code mm mm
WERA006190 # 1 80 98 3 1/8" 5
WERA006191 # 2 100 105 4" 5
*) Pozidriv = reg. trademark of European Industrial Service Ltd.
Kraftform Plus - Series 100 vdePlusMinus for work on terminal screws
165 i PZ/S vde insulated screwdriver for PlusMinus screws (Pozidriv/slotted)
extra slim
extra slim
18 1918 19For more information contact your
CABAC sales representativeFor more information contact your
CABAC sales representative
Kraftform Kompaktversatile tools for work on live wiring
Kraftform Kompakt vde 60 i/68 i/7
codeWERA003472 1817 Vde 1 x 9x102
KK 60 i 1 x 0,4x2,5x154; 1 x 0,6x3,5x154; 1 x 0,8x4,0x154; 1 x 1,0x5,5x154
KK 65 i PZ 1 x PZ 1x154; 1 x PZ 2x154
Kraftform Kompakt vde 60 i/65 i/7
1 Kraftform hand-held bit holder 817 VDE for Wera interchangeable blades onlyVDE interchangeable blades (each 154 mm long)7-piece set
The tools can be stored and carried in the rugged belt pouch, keeping them close to hand.
codeWERA003470 1817 Vde 1 x 9x102
KK 60 i 1 x 0,4x2,5x154; 1 x 0,6x3,5x154; 1 x 0,8x4,0x154; 1 x 1,0x5,5x154
KK 62 i 1 x PH 1x154; 1 x PH 2x154
1 Kraftform hand-held bit holder 817 VDE for Wera interchangeable blades onlyVDE interchangeable blades (each 154 mm long)7-piece set
codeWERA003473 1817 Vde 1 x 9x102
KK 60 i 1 x 0,6x3,5x154; 1 x 1,0x5,5x154
KK 62 i 1 x PH 1x154; 1 x PH 2x154
KK 68 i 1 x # 1x154; 1 x # 2x154
1 Kraftform hand-held bit holder 817 VDE for Wera VDE interchangeable blades onlyVDE interchangeable blades (each 154 mm long)7-piece set
Kraftform Kompaktversatile tools for work on live wiring
Kraftform Kompakt vde 60 i/7
20 2120 21For more information contact your
CABAC sales representativeFor more information contact your
CABAC sales representative
code Art.No. nm nm mm
WERA074750 † 7441 VDE 9 1,2-3,0 0,10 192 7 9/16" 1
Application: For Wera interchangeable Kraftform Kompakt VDE blades only
Accuracy: ±6 % (EN ISO 6789). Numerical torque value scale, audible excess-load signal
Handle: Kraftform with non-roll feature, multi-component
† available from July 2013
817 vde Kraftform blade-holding handle
code mm mm
WERA003990 9 102 1
Application: For Wera interchangeable VDE blades onlyHandle: Kraftform with non-roll feature, multi-component
Kraftform Kompaktversatile tools for work on live wiring
Series 7400 vde Kraftform adjustable torque handle
Kraftform Kompaktversatile tools for work on live wiring.
22 2322 23For more information contact your
CABAC sales representativeFor more information contact your
CABAC sales representative
Kraftform Kompakt vde torqueversatile tools for work on live wiring
Kraftform Kompakt vde torQUe 1.2 - 3.0 nm
14
Code
05059291001 17400 VDE 1 x 7441 VDE 1)
KK 60 i 1 x 0,4x2,5x154
KK 60 iS 1 x 0,6x3,5x154; 1 x 0,8x4,0x154; 1 x 1,0x5,5x154
KK 62 iS 1 x PH 1x154; 1 x PH 2x154
KK 65 iS PZ 1 x PZ 1x154; 1 x PZ 2x154
KK 65 iS PZ/S 1 x # 1x154; 1 x # 2x154
KK 67 i TORX® 1 x TX 10x154
KK 67 iS TORX® 1 x TX 15x154; 1 x TX 20x154; 1 x TX 25x154
!
Kraftform Kompakt VDEVersatile tools for work on live wiring
Kraftform Kompakt VDE Torque 1.2 - 3.0 Nm
1 Series 7400 VDE Kraftform adjustable torque handle (1.2 - 3.0 Nm) for Wera VDE interchangeable blades only
VDE interchangeable blades (each 154 mm long) with reduced blade diameter (articles KK 60 i 0,4x2,5 and KK 67 i TX 10 conventional diameter) with inte-grated protective insulation, allows sunken screws and spring elements to be accessed and actuated
15-piece set
1) available from July 2013
This tool is ideal for electrical applications and ensures safe work on components with loads up to 1,000 volts. It is perfect for the torque-controlled tightening of screws so as to avoid any damage to the screw or tool and to ensure a secure screw connection.
• Hand holder with adjustable torque from 1.2 – 3.0 Nm.• Accuracy ± 6% as per EN ISO 6789, BS EN 26789.• Suitable for the attachment of Wera VDE interchangeable
blades.• Simple to set the torque value using the integrated scale. • Distinctly audible and noticeable excess load signal when the
pre-set value is exceeded. • Unlimited torque for manual loosening jobs. • Handle/Interchangeable blade system for rapid blade exch-
ange.• Insulated interchangeable blades in accordance with IEC
60900 / DIN EN 60900. • Blades individually tested at 10,000 volts.• Including 14 blades with reduced blade diameter and inte-
grated protective insulation to allow easy access to sunken screws and actuation of spring terminals.
Multi-component, ergonomic Kraftform handle: Soft gripping zones with large contact surfaces provide particularly high friction and thereby enable outstanding torque transfer. Hard gripping zones ensure almost frictionless contact and consequently a more rapid repositioning of the hand. The result: more power and faster speeds when screwdriving.
Rapid attachment of the interchangeable blades: Simply insert the blade in the chuck and the automatic locking mechanism ensures a secure fit. To change the blade, just push the shift ring down-wards and remove the blade.
Orderly storage and secure transportation in a robust belt pouch.
Adjustable torque handleKraftform Kompakt VDE Torque
1 Series 7400 VDE Kraftform adjustable torque handle (1.2 - 3.0Nm) for Wera VDE interchangeable blades only.
VDE interchangeable blades (each 154mm long) with reduced blade diameter (articles KK 60 i 0,4x2,5 and KK 67 i TX 10 conventional diameter) with integrated protective insulation, allows sunken screws and spring elements the be accessed and actuated.
15 Piece set.
code
WERA059291 1 x 7441 VDE
1 x 0,4x2,5x154
1 x 0,6x3,5x154; 1 x 0, 8x4,0x154;1 x 1,0x5,5x154
1 x PH 1x154; 1 x PH 2x154
7400 VDE
KK 60 i
KK 60 iS
KK 62 iS
KK 65 iS PZ
KK 65 iS PZ/S
KK 67 i TORX®
KK 67 iS TORX®
1 x PZ 1x154; 1 x PZ 2x154
1 x # 1x154; 1 x # 2x154
1 x TX 10x154
1 x TX 15x154; 1 x TX 20x154;1 x TX 25x154
Kraftform Kompakt vde torque Kraftform Kompakt VDE Torque do not require complex, time-consum-ing procedures to change the torque setting.
No additional tools required.
No other VDE torque screwdriver comes close.
24 2524 25For more information contact your
CABAC sales representativeFor more information contact your
CABAC sales representative
code mm
WERA003455 PZ 1 154 6 1/16" 5
WERA003456 PZ 2 154 6 1/16" 5
Application: Pozidriv*) screwsBlade: Reduced blade diameter with integrated protective
insulation, allows sunken PZ screws to be accessed and actuated, individually tested as per IEC 60900
Drive: 9 mm hexagonal with entry chamferDesign: Zinc-phosphated, Black Point
Application: Slotted screwsBlade: Reduced blade diameter with integrated protective
insulation, allows sunken screws and spring elements to be accessed and actuated, individually tested as per IEC 60900
Drive: 9 mm hexagonal with entry chamferDesign: Conical blade, zinc-phosphated, Black Point
code mm mm mm
WERA003406 0,6 3,5 154 9/64" 6 1/16" 5
WERA003407 0,8 4,0 154 5/32" 6 1/16" 5
WERA003408 1,0 5,5 154 7/32" 6 1/16" 5
Kraftform Kompakt vdeversatile tools for work on live wiring
Kraftform Kompakt vde 60 iS
Kraftform Kompakt vdeversatile tools for work on live wiring
Kraftform Kompakt vde 65 iS
code mm
WERA003413 PH 1 154 6 1/16" 5
WERA003414 PH 2 154 6 1/16" 5
Kraftform Kompakt vde 62 iS
Application: Phillips screwsBlade: Reduced blade diameter with integrated protective
insulation, allows sunken PH screws to be accessed and actuated, individually tested as per IEC 60900
Drive: 9 mm hexagonal with entry chamferDesign: Zinc-phosphated, Black Point
code mm
WERA003442 # 1 154 6 1/16" 5
WERA003443 # 2 154 6 1/16" 5
Kraftform Kompakt vde 62 iS PH/S
Application: PlusMinus screws, slotted/PhillipsBlade: Reduced blade diameter with integrated protective
insulation, allows sunken PlusMinus screws to be accessed and actuated, individually tested as per IEC 60900
Drive: 9 mm hexagonal with entry chamferDesign: PlusMinus, slotted/Phillips, zinc-phosphated, Black Point
extra slim
extra slim
extra slim
extra slim
26 2726 27For more information contact your
CABAC sales representativeFor more information contact your
CABAC sales representative
Application: PlusMinus screws, slotted/Pozidriv*)
Blade: Reduced blade diameter with integrated protective insulation, allows sunken PlusMinus screws to be accessed and actuated, individually tested as per IEC 60900
Drive: 9 mm hexagonal with entry chamferDesign: PlusMinus, slotted/Pozidriv, zinc-phosphated, Black Point
code mm
WERA003447 # 1 154 6 1/16" 5
WERA003448 # 2 154 6 1/16" 5
*) Pozidriv = reg. trademark of European Industrial Service Ltd.
code mm
WERA003437 TX 15 154 6 1/16" 5
WERA003438 TX 20 154 6 1/16" 5
WERA003439 TX 25 154 6 1/16" 5
Kraftform Kompakt vde 67 iS torX®
Application: TORX® socket screwsBlade: Reduced blade diameter with integrated protective
insulation, allows sunken TORX® socket screws to be accessed and actuated, individually tested as per IEC 60900
Drive: 9 mm hexagonal with entry chamferDesign: Zinc-phosphated, Black Point
Application: Hexagon socket screwsBlade: Insulated, individually tested as per IEC 60900Drive: 9 mm hexagonal with entry chamferDesign: Zinc-phosphated, Black Point
code mm mm
WERA003420 2,5 154 6 1/16" 5
WERA003421 3,0 154 6 1/16" 5
WERA003422 4,0 154 6 1/16" 5
WERA003423 5,0 154 6 1/16" 5
WERA003424 6,0 154 6 1/16" 5
Kraftform Kompakt vde 68 iS
Application: Square socket head screwsBlade: Reduced blade diameter with integrated protective insula-
tion, allows sunken square socket head screws to be accessed and actuated, individually tested as per IEC 60900
Drive: 9 mm hexagonal with entry chamferDesign: Zinc-phosphated, Black Point
code mm
WERA003417 # 1 154 6 1/16" 5
WERA003418 # 2 154 6 1/16" 5
Kraftform Kompakt vdeversatile tools for work on live wiring
Kraftform Kompakt vde 65 iS PZ/S
Kraftform Kompakt vdeversatile tools for work on live wiring
Kraftform Kompakt vde 64 iextra slim
extra slim
extra slim
28 2928 29For more information contact your
CABAC sales representativeFor more information contact your
CABAC sales representative
Kraftform comfort vdeconvenient, Safe, good!
1160 i/7 Safety screwdriver set Kraftform comfort vde and voltage tester
codeWERA031575 11160 i Vde 1 x 0,4x2,5x80; 1 x 0,6x3,5x100; 1 x
0,8x4,0x100; 1 x 1,0x5,5x125
1162 i PH Vde 1 x PH 1x80; 1 x PH 2x100
4115 1 x 0,5x3,0x65
Application: Slotted and Phillips screwsContent: 7-piece set in display carton
individually tested at 10000vThe Kraftform Comfort VDE series offers a wide and diverse range of screwdrivers for universal use, with the distinctive Kraftform handle. The individual testing in a water bath at 10,000 volts, in accordance with DIN EN 60900 (IEC 60900), ensures safe working under a load of up to 1,000 volts.
Kraftform Kompakt vdeversatile tools for work on live wiring
code mm mm
WERA003460 6,3 89 3 9/16" 5
Switch cabinet key, 6.3 mm, glass-fibre reinforced
Kraftform Kompakt 96 vK 6,3
Kraftform Kompakt 97 vK 8,1
code mm mm
WERA003461 8,1 89 3 9/16" 5
Switch cabinet key, 8.1 mm, glass-fibre reinforced
code mm
WERA003462 89 3 9/16" 5
Kraftform Kompakt 98 dK
Switch cabinet key, glass-fibre reinforced
code mm
WERA003463 89 3 9/16" 5
Kraftform Kompakt 99 fl
Switch cabinet key, glass-fibre reinforced
30 3130 31For more information contact your
CABAC sales representativeFor more information contact your
CABAC sales representative
code mm mm mm mm
WERA031580 0,4 2,5 80 81 3/32" 3 1/8" 10
WERA031581 0,5 3,0 100 81 1/8" 4" 10
WERA031582 0,6 3,5 100 81 9/64" 4" 10
WERA031583 0,8 4,0 100 98 5/32" 4" 10
WERA031587 1,0 5,5 125 98 7/32" 5" 10
WERA031585 1,0 5,5 200 98 7/32" 8" 5
WERA031588 1,2 6,5 150 105 1/4" 6" 10
WERA031589 1,2 8,0 175 112 5/16" 7" 5
WERA031590 1,6 8,0 200 112 5/16" 8" 5
WERA031591 1,6 10,0 200 112 3/8" 8" 5
Application: Slotted screwsBlade: Insulated, individually tested as per IEC 60900Design: Conical tip, chrome-plated, Black PointHandle: Kraftform Comfort with non-roll feature, multi-component
Screw symbol and tip size
identification markings on the handle make it easier to find the right screwdriver in the tool case or at the workplace.
Hexagonal non-roll feature prevents any annoying rolling away.
code mm mm
WERA031600 PH 0 80 81 3 1/8" 5
WERA031601 PH 1 80 98 3 1/8" 5
WERA031603 PH 2 100 105 4" 5
WERA031605 PH 3 150 112 6" 5
WERA031606 PH 4 200 112 8" 2
Application: Phillips screwsBlade: Insulated, individually tested as per IEC 60900Design: Chrome-plated, Black PointHandle: Kraftform Comfort with non-roll feature, multi-component
1165 i PZ vde insulated screwdriver for Pozidriv screws
Application: Suitable for Pozidriv*) screwsBlade: Insulated, individually tested as per IEC 60900Design: Chrome-plated, Black PointHandle: Kraftform Comfort with non-roll feature, multi-component
code mm mm
WERA031610 PZ 0 80 81 3 1/8" 5
WERA031611 PZ 1 80 98 3 1/8" 5
WERA031613 PZ 2 100 105 4" 5
WERA031615 PZ 3 150 112 6" 5
*) Pozidriv = reg. trademark of European Industrial Service Ltd.
Kraftform comfort vdeconvenient, Safe, good!
1162 i PH vde insulated screwdriver for Phillips screws
Kraftform comfort vdeconvenient, Safe, good!
1160 i vde insulated screwdriver for slotted screws
32 3332 33For more information contact your
CABAC sales representativeFor more information contact your
CABAC sales representative
codeWERA051025 1889/4 r 1 x1/4”x100
800/1 Z 1 x 1,0x5,5x25; 1 x 1,2x6,5x25
851/1 Z PH 1 x PH 1x25; 1 x PH 2x25
868/1 Z 1 x # 1x25; 1 x # 2x25
codeWERA073680 51440 1 x 4,5 - 6,0x41,0
1442 1 x 6,0 - 8,5x41,0
1440/1442 Screw gripper set
Application: Attachment with holding function for screws, holds all screw profiles and sizes securely on the tool, suitable for round and hexagon blades with a diameter from 4.5 mm to 6.0 mm and 6.0 mm to 8.5 mm
Construction: Elastomer
Application: Suitable for 1/4” DIN 3126-C 6.3 and E 6.3 (ISO 1173) hexagon socket insert bits and Wera Series 1 and 4
Design: Attachment, bayonet, Rapidaptor rapid-in, rapid-out, rapid-spin, chuck-all and single hand technology
Handle: Kraftform with non-roll feature, multi-component, inte-grated magazine
Application: Suitable for 1/4” DIN 3126-C 6.3 and E 6.3 (ISO 1173) hexagon socket insert bits and Wera Series 1 and 4
Design: Attachment, bayonet, Rapidaptor rapid-in, rapid-out, rapid-spin, chuck-all and single hand technology
Handle: Kraftform with non-roll feature, multi-component, inte-grated magazine
Kraftform Kompakt 20 SeriesBayonet Blade Models
Kraftform Kompakt 25 with pouch
Kraftform Kompakt 26 with pouch
accessories
codeWERA051024 1889/4 r 1 x1/4”x100
800/1 Z 1 x 0,6x4,5x25; 1 x 1,0x5,5x25; 1 x 1,2x6,5x25
851/1 Z PH 1 x PH 1x25; 1 x PH 2x25; 1 x PH 3x25
34 3534 35For more information contact your
CABAC sales representativeFor more information contact your
CABAC sales representative
the chiseldriver: for fastening and chisellingA screwdriver is very often misused, in that it is struck with a hammer for light chiselling jobs or for loosening rusted screws.
This is dangerous because conventional screwdrivers are not appropriate for work of that kind – the grip and/or blade could splinter and cause injuries.
The Wera Chiseldriver has been developed specifically for these applications. The head of the handle is fitted with a robust, metal impact cap which is directly connected to the hexagonal blade that extends right through the handle. The full force of hammer blows is thereby transferred.
The special, ductile tempering of the blade prevents any splintering and injuries.
Even more force can be transferred when screwdriving by fitting an open-jaw or ring spanner over the hex bolster.
code mm mm mm mm mm mm
WERA018260 0,6 3,5 4 80 81 9/64" 3 1/8" 10
WERA018262 0,8 4,5 5 8 90 98 0,178" 3 1/2" 10
WERA018264 1,0 5,5 6 10 100 105 7/32" 4" 10
WERA018266 1,2 7,0 6 10 125 105 9/32" 5" 10
WERA018268 1,6 9,0 8 13 150 112 11/32" 6" 10
WERA018270 1,6 10,0 8 13 175 112 3/8" 7" 5
WERA018272 2,0 12,0 10 16 200 117 1/2" 8" 2
WERA018274 2,5 14,0 10 16 250 117 9/16" 10" 2
Application: Slotted screwsBlade: Hexagonal throughout with impact cap, hexagonal bolster
from 0.8 x 4.5Design: Chrome-plated, Black PointHandle: Kraftform with non-roll feature, multi-component, sizes
2.0 x 12.0, 2.5 x 14.0: Kraftform with non-roll feature, Weralit II, single-component
Kraftform Plus Series 900 A hexagon blade made out of high-quality bit material extends right through the handle – thereby ensuring full transfer of force, even when struck with a hammer. The ductile tempered material prevents the blade from splintering or breaking.
Kraftform Plus Series 900for fastening and chiselling
932 a Screwdriver for slotted screws
CABAC has a policy of continuous product improvement and reserves the right to change
materials and specifications without notice. Drawings, where used, are not to scale.
All dimensions are in millimetres and sizes given are approximate. Where available, technical
and MSDS data sheets are available on the CABAC website.
All CABAC products should be installed and used in accordance with manufacturer’s
instructions provided. Warning: products may be the subject of registered designs and
patents. Refer to CABAC website for terms and conditions on warranty.
The one day, one call, one delivery does not cover the following items: Cabchem, Cast Resin
kits, Custom manufacturing & kitting, Cabinets, Ladders, Pits & Pillars, CABTRAY & Branch
stock orders.
T: 133 122 F: 1300 303 310E: [email protected] W: cabac.com.au
WERADL2013