welding symbol note
TRANSCRIPT
-
8/3/2019 Welding Symbol Note
1/5
-
8/3/2019 Welding Symbol Note
2/5
-
8/3/2019 Welding Symbol Note
3/5
ExamplesWelding symbols allow the engineer or draftsperson to communicate detailed information about the
weld to the welder.
Examine the examples below which show the weld required and the symbol that conveys thisinformation.
-
8/3/2019 Welding Symbol Note
4/5
Compare these two symbols. Note what is different and what each one means.
10mm fillet weld other side of arrow
6mm fillet weld arrow sideWeld on siteUse the gas metal arc welding process
6mm fillet weld on both sidesWeld all round
Weld on siteUse the gas metal arc welding process
Weld the other side - 10mm leg length and 50mm long.The centre of the weld to the centre of the next weld is to be200mm long. On the same side as the arrow, weld a 6mm leglength and 100mm long. The centre of the weld to the next
weld centre is to be 500mm long.
Butt Welds
Groove Joints
-
8/3/2019 Welding Symbol Note
5/5
Lap Joints
Tee Joints