welding electrode and powder dryers
DESCRIPTION
Portable and stationary equipment in a variety of sizes and designs: portable and stationary welding electrode dryer, welding powder dryer, welding electrode storage cabinet, welding powder storage device, dryer for welding electrodes and fluxes.TRANSCRIPT
1/5
Loesche ThermoProzess GmbH • Uechtingstraße 19 / Gebäude D9 • D-45881 GelsenkirchenTel. +49 - 209 - 36 17 22 - 0 • Fax: +49 - 209 - 36 17 22 - 180Email: [email protected] • Internet: www.loesche-tp.de
Welding electrode dryerWelding powder dryer
Portable and stationary equipment in a variety of sizes and designs
• Rugged design
• High-quality insulation
• Drying temperature up to 400 °C
• Special designs upon request
1303730_LTP_FLY_Schweisselektrodentrockner_5S_en.indd 1 30.07.13 13:01
2/5
Loesche ThermoProzess GmbH • Uechtingstraße 19 / Gebäude D9 • D-45881 GelsenkirchenTel. +49 - 209 - 36 17 22 - 0 • Fax: +49 - 209 - 36 17 22 - 180Email: [email protected] • Internet: www.loesche-tp.de
Electrode storage container KET
Can hold about 30 electrodes up to Ø 2.5 mm, unheated. Comes with a snap hook to attach to the welder's belt.
SET-1/220
Ideal for use at construction sites.Capacity: 1 package of welding rods. Dual wall enclosure, well insulated. Temperature approx. 100°C at 20°C room temperature. All equipment of type SET 1 is equipped with an elec-trode carrying basket. This makes the removal of electrodes easy. Connecting cable with "Schuko" plug for 230 V, all other voltages without plug. Internally made of stainless steel.
SET-1/220TR
Design similar to SET-1; however, with a thermostat control. Temperature in�nitely variable from 30°C to 150°C. Internally made of stainless steel.
SET-2/220
Solid design, portable, ideal for installation work. Holds up to 2 packages of welding rods. Dual wall enclosure and lid, well insulated. Temperature up to 300°C, in�nitely variable. Connecting cable with "Schuko" plug for 230 V, all other voltages without plug.Thermostat, including indicator light. Internally made of stainless steel.
SET-4/220 / SET-4/4 220
Solid design, portable, ideal for installation work. Holds up to 4 packages of welding rods. Dual wall enclosure and lid, well insulated. Depending on type, temperature in�nitely variable up to 300°C or 400°C. Connecting cable with "Schuko" plug for 230 V, all other voltages without plug. Thermostat, including indicator light. Internally made of stainless steel.
SET-10/220 / SET-10/4 220
Robust design Holds up to 10 packages of welding rods. Dual wall enclo-sure and lid, well insulated.Depending on type, temperature in�nitely variable up to 300°C or 400°C. Connecting cable with "Schuko" plug. Thermostat, including indicator light. Internally made of stainless steel.
Portable welding electrode dryers
SET-2/220
Solid design, portable, ideal for installation work. Holds up to 2 packages of welding rods. Dual wall enclosure and lid, well insulated. Temperature up to 300°C, in�nitely variable. Connecting cable with "Schuko" plug for 230 V, all other voltages without plug.Thermostat, including indicator light. Internally made of stainless steel.
SET-4/220 / SET-4/4 220
Solid design, portable, ideal for installation work. Holds up to 4 packages of welding rods. Dual wall enclosure and lid, well insulated. Depending on type, temperature in�nitely variable up to 300°C or 400°C. Connecting cable with "Schuko" plug for 230 V, all other voltages without plug. Thermostat, including indicator light. Internally made of stainless steel.
SET-10/220 / SET-10/4 220
Robust design Holds up to 10 packages of welding rods. Dual wall enclosure and lid, well insulated.Depending on type, temperature in�nitely variable up to 300°C or 400°C. Connecting cable with "Schuko" plug. Thermostat, including indicator light. Internally made of stainless steel.
1303730_LTP_FLY_Schweisselektrodentrockner_5S_en.indd 2 30.07.13 13:01
3/5
Loesche ThermoProzess GmbH • Uechtingstraße 19 / Gebäude D9 • D-45881 GelsenkirchenTel. +49 - 209 - 36 17 22 - 0 • Fax: +49 - 209 - 36 17 22 - 180Email: [email protected] • Internet: www.loesche-tp.de
4 inserts with 5 separate welding rod compart-ments; makes storing of several types of elec-trodes easy and arranges them neatly. Holds up to 50 packages of welding rods.Dual wall enclosure and door, well insulated.Temperature adjustable up to 400°C. Thermostat, including indicator light. Inside and shelves made of stainless steel.
Surcharge for peripheral equipment.
Installation of a dial indicator thermometer, dis-play range 0°C – 400°C in front door.Installation of an electronic control module in the switch cabinet for adjusting the drying and hold-ing temperature whilst limiting the time of the dry-ing temperature.
Stationary welding electrode drying cabinets
SET-50/4
Welding electrode dryer, type: SETUWelding powder dryer, type: SPTUWith circulating air and electronic control
The air recirculating unit, series SETU/SPTU, guarantees the op-timum drying of the welding electrodes or welding powder at with extreme temperature accuracy. The drying temperature is in�nitely variable up to 400°C. Preselection of drying and holding temperature optional. Special designs upon request.
SETU-50
SETU-100
Drying temperature
Drying time Time Z
Heating period
Tem
pera
ture
T
0
Te
mpe
ratu
re T
0
Heating period
Drying time Storage duration Time Z
Drying temperature
Storage temperature
Program run: SETU-2R SPTU-2R
Program run: SETU-1R SPTU-1R
SETU-50
1303730_LTP_FLY_Schweisselektrodentrockner_5S_en.indd 3 30.07.13 13:01
4/5
Loesche ThermoProzess GmbH • Uechtingstraße 19 / Gebäude D9 • D-45881 GelsenkirchenTel. +49 - 209 - 36 17 22 - 0 • Fax: +49 - 209 - 36 17 22 - 180Email: [email protected] • Internet: www.loesche-tp.de
The welding electrode storage cabinet SEL
Welding powder storage device SPL
• Type designation SEL
• External dimensions: Height: 1950 mm
Width: 950 mm
Depth: 500 mm
• Storage capacity: max. 650 kg welding electrodes
• Cabinet housing made of sturdy steel plate construction
• 7 �xed inserts
• Double door with safety lock
• Painting: Pebble grey RAL 7032
• Temperature inside the cabinet maintained by electrical heating: ~ 30°C
• Electrical connection 230 V, 50 Hz – 300 W
The welding electrode storage cabinet SEL is not intended for drying welding rods but for storing previously dried elec-trodes. For drying welding electrodes, we recommend our welding electrode dryer, series SET or SETU
The dryer is available in stainless steel with recircu-lating air and electronic control module (type: FWMU).
The welding powder units, type SPL are recommended primarily for the storage of welding powder. The interior contains a heating pocket that allows heating the welding powder to max. 400°C. The units are available in sizes from 50 litre to 350 litre volume.
SPL-50 SPL-350SPL-350
1303730_LTP_FLY_Schweisselektrodentrockner_5S_en.indd 4 30.07.13 13:01
5/5
Loesche ThermoProzess GmbH • Uechtingstraße 19 / Gebäude D9 • D-45881 GelsenkirchenTel. +49 - 209 - 36 17 22 - 0 • Fax: +49 - 209 - 36 17 22 - 180Email: [email protected] • Internet: www.loesche-tp.de
Dryer for welding electrodes / Dryer for welding fluxes
Technical dataType
Volume(approx.)packages
Electric supply Energy
kW
max.temperature
°C
Dimensionsinside ( ) mm
Weightapprox.
kgV Hz A height width depth
SET-1/24 1 24 1* 4.6 0.12 100 555(470)
140(80)
140(80) 6
SET-1/42 1 42 1* 2.6 0.12 100 555(470)
140(80)
140(80) 6
SET-1/65 1 65 1* 1.7 0.12 100 555(470)
140(80)
140(80) 6
SET-1/220 1 230 1* 0.5 0.12 100 555(470)
140(80)
140(80) 6
SET-1/220TR 1 230 1* 1.1 0.24 150 585(470)
150(80)
180(80) 8
SET-2/42 2 42 1* 9.5 0.4 300 690(470)
270(100)
230(100) 14
SET-2/65 2 65 1* 9.2 0.6 300 690(470)
270(100)
230(100) 14
SET-2/220 2 230 50 2.7 0.6 300 690(470)
270(100)
230(100) 14
SET-4/42 4 42 502* 14.3 0.6 300 690(470)
310(140)
270(140) 18
SET-4/65 4 65 502* 13.8 0.9 300 690(470)
310(140)
270(140) 18
SET-4/220 4 230 50 4.1 0.9 300 690(470)
310(140)
270(140) 18
SET-4/4 220 4 230 50 5.5 1.2 400 690(470)
310(140)
270(140) 18
SET-10/220 10 230 50 5.5 1.2 300 690(470)
410(240)
370(240) 28
SET-10/4 10 230 50 5.5 1.2 400 690(470)
410(240)
370(240) 28
SET-50/4 50 230 3~400 3~/N 50 9.9 / 5.7 3.75 400 1080
(610)740
(490)810
(510) 146
SETU/SPTU-50 60 4003~/N 50 6.6 5.2 400 1380
(760)1110(670)
1050(660) 263
SETU/SPTU-100 100 230 3~400 3~/N 50 9.2 / 15.8 6.2 400 1820
(1200)1110(670)
1050(660) 350
1* = not depending on frequency 2* = with direct current only 4-position switch possible
1303730_LTP_FLY_Schweisselektrodentrockner_5S_en.indd 5 30.07.13 13:01