week 1 - sequence of operations

Sequence of Operations: Final Collection

FUTURISM “ A bleak existence” Roxanne Savage

Week 1: Outfit 3

•  Analyse outfit on range plan •  Find the correct size blocks for the outfit •  Start construction sheet •  Add a balance line to the sheet

•  Draw around pattern blocks •  The construction sheet has all the

information that is on the pattern block •  All changes must be shown on the construction

sheet including; darts, size, front, back, straight grain, cut 1 pair, cut to fold.

•  Pattern Draft, instructions •  Pattern block, instructions, seam allowance.

Sequence of Operations: Final collection

Roxanne Savage

Week 1: Outfit 3


Front and Back Jacket

•  Starting with the Jacket •  Use a size 12 bodice block •  On the construction sheet add a balance line,

placing bodice block together on the side seams •  Draw around block •  Pivot dart into waist •  On the bodice decide where the halter neck seam

would go •  Trace over construction sheet, cut out and glue

the halter neck pattern onto the sheet •  The shoulders are pin tucked, I decided to

leave the shoulder piece as it was, draw again for my block and add seam allowance.

•  I would pin tuck my fabric first and then cut the pattern out of the pin tucked fabric.

•  On the design the jacket has a raised neck, measure on the mannequin how high on the neck needs to be added on the halter neck piece.

•  Front neck cut to fold and back neck cut 1 pair.

•  Front and back bodice block, seam allowance, darts, size, cut to fold, cut 1 pair, straight grain.

•  Draw around size 12 sleeve block •  Sleeve block with seam allowance, front, back. •  Pin tuck fabric first then cut pattern out.

Roxanne Savage

Week 1: Outfit 3


Roxanne Savage

•  Leggings •  Size 12 knee length •  Front and back on construction sheet •  Measure from the inside leg on the mannequin, 72cm

•  Place tape measure on inside leg on construction sheet

•  Mark down to 72cm, extending the leg. •  Draw around the new legging pattern, front and back

•  Zip on the side and center back legs •  Adding all instructions; front, back, size, length, darts, straight grain, hem

Week 1: Outfit 3


Roxanne Savage

•  The skirt •  Start with full circle skirt •  Size 12 •  On the construction sheet I used a full

circle skirt block, front and back •  I then measured on a mannequin how short I

wanted the skirt to be •  With the draft block I had to section the

skirt, measuring how much fullness I want in the skirt

•  Making a new draft of the mini full circle, I then have to cut the front and back equally into two pattern pieces. This is where the center front and center back seams will be placed

•  I Now trace over the draft adding seam allowance of 1cm for my new skirt blocks

•  The skirt for outfit 3 is pleated, I will pleat the fabric I am using first before I cut the pattern out.

Roxanne Savage

Roxanne SavageFuturism: “ A Bleak Existence”A/W 14

FrontBack

Body suit with collar and chest pieceembellished. Panelling on side thighs, frontand back.

Week 1: Outfit 1


•  Using a size 12 playsuit block •  Trace the block and add all instructions •  Measure the chest of a mannequin, deciding on how high up on the collar or neck the T-bar will be •  The front block will be cut to fold •  The back block will be cut 1 pair •  The neck piece was drafted from a size 12 mannequin, then cut

and open the neck piece draft •  This was then made into a block •  The shorts section of the playsuit has separate panels sliver fabric. •  Deciding where each panel will sit, then making into a block

then adding 1 cm seam allowance. Each panel will be cut to 1 pair

•  This outfit also has leggings to complete the look, I will be using the pattern of leggings from outfit 3

week 1 - sequence of operations

Documents