wedding bear bride : assembly instructions page · assemble the body b use pattern: page4/page5. b1...

A1 H

ead

Notation Key

Notation Key

Tools

Scissors

Paste, or woodwork glue

Stencil pen, or bodkin

Ruler

Scissors lineMountain foldValley foldGlue spotGlue reverse sideParts No.A1, B1

Scissors line

Triangular glue tab

Glue spot Parts No.

Assemble the headA

Parts name

Glue down the glue tabs one at a time in turn.

Cut a slot right in to the apex ofthe triangular glue tab.

A1

A1

A1

A1A1

Use pattern: Page2/Page3.

Wedding Bear Bride : Assembly Instructions Page

Canon is a registered trademark of Canon Inc. Katsuyuki Shiga(PinoArt)

The Assembly instructions are divided into seven blocks: A (head), B (body), C (legs), D (dress), E (ribbon), F (arm), and G (veil and bouquet).Follow the instructions for each block to assemble your teddy bear.

<Caution>Keep scissors and glue away from small children.Be careful not to cut your fingers when using scissors.

marks a basic assembly technique that remains the same regardless of the part. Instructions are printed only for the first instance.

Cut out A1 by cutting along the lines.Cut along the line marked .

Trace along the mountain fold line with a pencil, scoring it to make it easier to fold.

Make a mountain fold on A1.

Using the photo as a guide, apply pressure with the palm of your hand, gradually curling the paper in the direction of the arrow.

The parts will be easier to assemble if curled.

Add a slight curl to A1 when attaching it.

Using the photo as a guide, attach in the direction of the arrow.Attach the triangular glue tabs so that the front side becomes convex.

Assemble the bodyUse pattern: Page4/Page5.B

B1

A1

A8

A8A2

A9A9 A9

A9A3

A3 A2

A1A1

A4

A4

A4

A6

A5

A5

A3

A2

A1A5A6

A7

A7

A4

B1

B2B2

Glue together the remaining glue spots.

A2 Head

A2

A2

Wedding Bear Bride : Assembly InstructionsCanon is a registered trademark of Canon Inc. Katsuyuki Shiga(PinoArt)

Page

Cut out A2 and A3, curl them and glue the triangular glue tabs, attaching each to A1.

Assemble A4 and attach it to A5.

Assemble A6 and A7 in the same way and attach the ears to the head.

Assemble A8 and attach to the head.Assemble A9.

Assemble B1.

Assemble B2.

*Note: The completed A9 will be attached in the last step.

*Note: The completed head will be fitted in a later step.

B1

B1

B2 B2

B1

C2

C3

C4

C6

C7

C5

C1

C2

C2

C3

C4

C3

C6C5

C7

C8

C9 C10C11

C12C13 C14

C6

C6C6

C6C13

B2

B2

B1

B1

C7

C5

C4

B3 B3

Assemble the legsUse pattern: Page6/Page7.C

C7

Leave the protruding part out.

Return C7 to itsoriginal position.

Do not put glue on the protruding parts.

C7


Page

Assemble parts C2 through C7.

Attach C1 through C7 together.

Assemble parts C8 through C14 in the same way.

Fit both legs to the completed body.

Attach B1 and B2 together.

Assemble B3 and attach it to B1 to complete the body.

D1

D5

D5D1

D3

D6

D3

D4D9

D8 D8D7

D3D3

D1D1

D8D8

D7

D9

D10

D9D10

D1D5 D6

D1D3

D3

D10

D1

D5

D1

D3

D1

D5 D2

D4

D6

D3D6

D3

D1

D2 D1

D1

D2

Assemble the dressUse pattern: Page8/Page9/Page10/Page11.D

Match up the shapes of the glue spots and then stick them together.

D7

D9

D10

Check front and back, then stick together.

Check front and back, then stick together.


Page

Attach D1 and D2.Assemble D3 and D4 in the same way, then attach D1 and D3.

Assemble D9 and D10 and stick them together.

Attach D9,D10 to the skirt,to complete the dress.

Attach D5 and D6 to the skirt.

Assemble D8 and attach it to D7.

Attach D7 and D8 to the skirt.

E1 E1

E1

E1

E2

E2

E2

E3

E2

E4E3

E5

E1

E3

E5E2

E4

E5

E3

E1

E1D10

Assemble the ribbonUse pattern: Page12.E


Page

Assemble E1.

Fit the dress over the body, to complete the ribbon.

Assemble E2 and attach it to E3.Attach E4 and E5 in the same way.

Attach E2, E3, E4, E5 to E1.

Attach the ribbon to the dress.

F1

F2

F3

F4

F5

F6

F6 F6

F11 F5

B1

F5

F5

F5

F6

F1

F2

F2

F3

F3

B3

B3

F4

F4

F5

F5

F6

F7

F10

F8F9

F11

F12

Assemble the armUse pattern: Page13.F

Do not put glue on the protruding parts.

Leave the protruding part out.

Return F6 to its original position.

Return B3 to its original position.


Page

Assemble parts F1 through F6.

Fit the head to the body and attach A9.

Attach F1 through F6 together.

Assemble parts F7 through F12 in the same way.

Fit both arms to the completed body.

A9

G1

G2

G1

G2G5

G1

G2

G3

G4G5

G6

G5

G16G17G18G19

G20G21G22G23

G24G25G26G27

G15

G6

G7

G8

G9

G10G10

G10

G8 G7

G9

G9

G11

G28

G1

G2

G11 G11

G13

G13 G14G12

G12G14

G15

G11

G15

Open out the petals and then stick them together.

Glue here.

Match up the lines.Assemble G3 and G4 in the same way.

Match up the shapes of the glue spots and then stick them together.

Assemble the veil and bouquetUse pattern: Page14/Page15.G

G8


Page

Assemble G1, G2 and G3, G4 and attach G5.

Assemble G15 and attach it to G11.

Assemble G6 and attach to the ribbon. Assemble parts G16 to G27 in the same way as the flowers for the veil, then stick them onto G15.

Assemble G28 and stick it on behind the leaf of the bouquet. Attach the bouquet to the veil and you’re finished!

Attach G7,G8,G9 and G10 and attach it to the ribbon.

Attach G11,G12,G13 and G14.

wedding bear bride : assembly instructions page · assemble the body b use pattern: page4/page5. b1...

Documents