Guerilla TechnologiesFebruary 2010

Information in this document is subject to change without notice. No part of this publication may be reproduced or transmitted in any form or any means, electronic or mechanical, for any purpose, without the

express written permission of Guerilla Technologies. Copyright © 2010 Guerilla Technologies, Inc. All Rights Reserved.

ULTIMA© User Manual

Table of Contents

Introduction..................................................................1Shipping Contents.......................................................1ULTIMA© System Layout Overview.............................2Keypad Layout Overview.............................................3What ULTIMA© Can Not Scan.....................................3ULTIMA© Set-up..........................................................4Basic Operating Instructions........................................5ULTIMA© Modes..........................................................8Adjusting Reading Speed............................................9Changing Reading Voice...........................................10Using a Headset with ULTIMA©.................................10Magnification Mode....................................................11Touch Screen Function Layout..................................13Low Vision Settings...................................................14Snap-Line..................................................................19Taking Care of ULTIMA©...........................................20Traveling with ULTIMA©............................................20Warranty Information.................................................21Toubleshooting ULTIMA©..........................................23Keypad Functions Reference....................................24GTI Information..........................................................26

440012-001 Rev F 0

Introduction

Welcome to ULTIMA©, the most advanced low vision reading machine.

With ULTIMA©, you will experience unmatched speech with TextAloud powered by AT&T Natural Voices® and world class optical character recognition with ABBYY Fine Reader® software.

This Manual and Installation Guide is intended for use by dealers, rehabilitation professionals and users.

Note: Guerilla Technologies Incorporated recommends that the ULTIMA© be plugged into an uninterruptible power supply (UPS) due to the fact that the computer components are susceptible to power surges, fluctuations and power interruptions during operation.

Shipping Contents

You have purchased a complete ULTIMA© reading system, which includes a reader, scanner and keypad. Other items included: A user manual, quick set-up guide and a static free cloth.

440012-001 Rev F 1

ULTIMA© System Layout Overview

440012-001 Rev F 2

1. 4 in 1 Card Reader

2. USB Port

3. USB Port

4. Gigabit LAN Port

5. Microphone Jack

6. Audio Output Jack

1. Power Button

2. Stylus Pen

3. USB Port

4. USB Port

5. DC Power Input

Keypad Layout Overview

What ULTIMA© Can Not Scan

Consistent with all reading machines, the ULTIMA© cannot read handwritten or hand-printed material. If there is a signature on a typewritten letter, ULTIMA© reads the letter but not the signature. If the signature is written over other printed words, for example, the closing phrase “Sincerely yours”, the letters touched by the signature will not read correctly. ULTIMA© may have trouble reading some printed forms because a box often surrounds the text on a form. ULTIMA© sometimes ignores text that is too close to vertical or horizontal lines or words surrounded by a box.

440012-001 Rev F 3

1. Shutdown Key

2. Shift Key

3. Pause/Resume Key

4. Start Key

5. Mode Key

ULTIMA© Set-upStep 1: Unlock the scanner

1. The scanner is shipped in the locked position. The scanner lock is located on the bottom of the scanner, about an inch from the front of the scanner, just right of the center

2. To unlock the scanner, slide the scanner lock to the RIGHT

Note: It is not necessary to lock the scanner after each use. However, if you move the scanner any significant distance or return it for service, be sure to re-lock it. To re-lock the scanner, slide the lock on the bottom to the LEFT.

Step 2: Powering up ULTIMA©

1. Connect the AC adapter/power cord from an electrical outlet into the plug labeled 5 (bottom, left side)

2. Connect the USB cord from the keypad into the USB portlabeled 4 (bottom, left side,directly above the power plug)

3. Connect the USB cord from the scanner into the USB portlabeled 3 (bottom, left side,directly above the keypad

440012-001 Rev F 4

USB port)

4. Turn on ULTIMA© with the power button at the top of themachine labeled 1 (top, left side)

Basic Operating Instructions

1. Place your reading material (print-side down) on the scanners glass plate. Square the page against the raised left and front edges of the scanner bed and close the lid.

2. Press the Start Key (labeled (4) in the keypad overview). The ULTIMA© will say, “Scanning in process, please wait”.

Note: You will hear the scanner activate and the scanner carriage move. ULTIMA© will say, “Scanning is complete”, when the scan routine has been completed.

3. After scanning is complete the ULTIMA© will automatically begin to read the page aloud. The page will be shown in large font and each word will be highlighted as it is read.

4. Press the Pause/Resume key (labeled (3) in the keypad overview) to pause reading or resume reading of the current document.

440012-001 Rev F 5

Note: When the entire page has been read, you will hear, “End of file”, and the reading will stop.

5. You may read the document again from the beginning without re-scanning. FIRST press and hold down the Shift Key (labeled (2) in the keypad overview) as you press and hold the shift key tap the Mode Key (labeled (5) in the keypad overview). You will hear, “Top of page”, and the reading will begin again.

6. You may navigate through the scanned document by line if desired. First, press the Pause/Resume key (labeled (3) in the keypad overview) to pause the reading of the current page. (You can do this at any time during the reading of a page.) Next, to skim forward by line, press and hold the Pause/Resume key (labeled (3) in the keypad overview). To skim backward by line, press and hold the Start Key (labeled (4) in the keypad overview). As you hold down the key, your reader will move back or forward by line until the key is released. You will hear a bell chime each time a line has been skipped. This will alert you to how many lines forward or backward you have moved.

7. To adjust the volume on ULTIMA, press and hold the Shift key (labeled (2) in the keypad overview) and the Pause/Resume key (labeled (3) in the keypad overview) to increase the volume. Press and hold the Shift key (labeled (2) in the keypad overview) and the Start key

440012-001 Rev F 6

(labeled (4) in the keypad overview) to decrease the volume.

8. To shut down ULTIMA©, simply press the Shutdown Key (labeled (1) in the keypad overview) the ULTIMA© will announce “system will shut down in 5 seconds, if you wish to continue, press the shutdown key again,” after pressing the Shutdown Key again the system will power off.

Note: You may press and hold the Shutdown Key (labeled (1) in the keypad overview) for a brief tutorial of ULTIMA©.

440012-001 Rev F 7

ULTIMA© Modes

Column Mode

If you are trying to view a book, newspaper, letter or anything that needs to be read from top to bottom then Column Mode would be the preferred mode to use.

Tabular Mode

If you are trying to view a bill, spreadsheet or anything that needs to be read line by line, from left to right then Tabular Mode would be the preferred mode to use.

Magnification Mode

If you are trying to view a label, photograph or form as a magnified image, the Magnification Mode will enable you to enlarge and manipulate the item being viewed.

Note: Please see the section on Magnification Mode (page 10) for further instructions and capabilities

Currency Mode

If you are trying to identify the denomination of a U.S. bill, Currency Mode will enable you identify the denomination. Simply place the bill on the scanners glass plate, square the edges against the raised left and front corner edges and close the lid. Then, press the Start Key (labeled (4) in the keypad overview). The scanner will scan and then announce the denomination of the bill being scanned.

Note: ULTIMA© will only read U.S. currency

440012-001 Rev F 8

Adjusting Reading Speeds

The ULTIMA© has 10 different reading speeds

Hold down the Shift Key (labeled (2) in the keypad overview) and press the Start Key (labeled (4) in the keypad overview) to decrease the reading speed.

Hold down the Shift Key (labeled (2) in the keypad overview) and press the Pause/Resume Key (labeled (3) in the keypad overview) to increase the reading speed.

In scan-and-read mode, you will hear, “voice rate up” or “voice rate down”, signifying a reading speed change.

Note: The ULTIMA© must be reading a document in order to accept the reading speed commands. Once the new reading speed has been accepted, the new reading speed will be used. This new reading speed will now be used as the default speed until you decide to change it in the future.

440012-001 Rev F 9

Changing the Reading Voice

At any time, you can press and hold the Mode Key (labeled (5) in the keypad overview) to change the reading voice. After holding the Mode Key down for about five seconds, you will activate the default voice change function.

The ULTIMA© will begin to announce, “changing voice to AT&T Mike,” then, “changing voice to AT&T Crystal”. When the last voice is reached, the list will cycle again. This will continue until you release the Mode Key. Release the Mode Key after hearing the desired voice you wish to select as the new default speaking voice.

Note: When selecting the desired default voice, please let the message fully complete before releasing the Mode Key. If the message is not able to complete, you may need to tap the Mode Key once to finalize the selection.

Using a Headset with ULTIMA©

There are two 1/8 inch jack connectors on the bottom, right side of the ULTIMA©. Insert the headset jack into the jack connector labeled (6) in the ULTIMA© System Layout Overview.

10

Magnification Mode

If you are trying to view a label, photograph or form as a magnified image, the Magnification Mode will enable you to enlarge and manipulate the item being viewed.

1. Press the Mode Key on the keypad (labeled (5) on the keypad overview) to change to Magnification Mode. The key may need to be pressed more than once to change to this mode. When this mode has been reached, the ULTIMA© will announce, “You are now in Magnification Mode.”

2. Place your item on the scanner bed as close to the front, left corner as possible.

3. Press the Start Key (labeled (4) on the keypad overview). After the ULTIMA© has completed the scan of the item, an image of the item will appear on the screen.

4. Using either your finger or the Stylus Pen (labeled (2) in the system layout overview) gently touch-and-hold the screen to magnify the image. Each subsequent touch-and-hold will magnify the image until you have reached the maximum size.

5. Using either your finger or the Stylus Pen (labeled (2) in the system layout overview) gently double-tap the screen to de-magnify the image. Each subsequent double-tap will de-magnify the image until you have reached the smallest size

440012-001 Rev F 11

Note: If you prefer to use the keypad to magnify the item being viewed, simply press the Pause/Resume Key (labeled (3) on the keypad overview) to zoom in on the scanned image/document.

6. If desired, you may move or “pan” the image on the screen. Simply use your finger or the Stylus Pen (labeled (2) in the system layout overview) to move the image on the screen by touching the screen and moving the image in any direction.

Note: You may also “pan” or move the image/document using the keypad. Press and hold the Pause/Resume Key (labeled (3) on the keypad overview) to pan right. Press and hold the Start Key (labeled (4) on the keypad overview) to pan left. Press and hold the Mode Key (labeled (5) on the keypad overview) to pan down. Press and hold the Shutdown Key (labeled (1) in the keypad overview) to pan up.

440012-001 Rev F 12

Touch Screen Functions Layout

1. Snap-line 3. Reset

2. Brightness, contrast & color control

Note: Touch screen functions only apply in Magnification Mode.

440012-001 Rev F 13

Low Vision Settings

The ULTIMA© can magnify text from a scanned page so that you may read the enlarged text from the screen.

Instead of just making the page bigger, the ULTIMA© will rewrite the words in your favorite font style at the most comfortable size, in the best combination of foreground and background colors, and if desired, even highlight each word in progression in a color combination of your choice.

1. FIRST, press and hold the Shift Key (labeled (2) in the keypad overview) then, as you press and hold the Shift key tap the Shutdown Key (labeled (1) in the keypad overview) to change to Low Vision Settings. When this mode is activated, the ULTIMA© will announce, “You are now in Low Vision Settings…Set the font size.”

2. The first available adjustment in Low Vision Settings is, “Set the font size”. Simply press the Pause/Resume Key (labeled (3) in the keypad overview) to make the font larger OR press the Start Key (labeled (4) in the keypad overview) to make the font smaller. You can view these adjustments on the video screen to see the size adjustment you have made. When finished with the adjustment, first, press and hold the Shift Key (labeled (2) in the keypad overview) then, as you press and hold the Shift key tap the Shutdown Key (labeled (1) in the keypad overview) to return to Column Mode OR press and hold the Shift Key (labeled (2) in the keypad overview) then, as you

440012-001 Rev F 14

press and hold the Shift key tap the Mode Key (labeled (5) in the keypad overview) to make the next available adjustment.

3. The next available adjustment in Low Vision Settings is, “Set the font type”. Simply press the Pause/Resume Key (labeled (3) in the keypad overview) to change the font to one of the many font styles loaded on your ULTIMA©. You can press the Start Key (labeled (4) in the keypad overview) to return to a previous choice in the list. You can view these adjustments on the video screen to see the font style you have currently selected. When finished with the adjustment, first, press and hold the Shift Key (labeled (2) in the keypad overview) then, as you press and hold the Shift key tap the Shutdown Key (labeled (1) in the keypad overview) to return to Column Mode OR press and hold the Shift Key (labeled (2) in the keypad overview) then, as you press and hold the Shift key tap the Mode Key (labeled (5) in the keypad overview) to make the next available adjustment.

4. The next available adjustment in Low Vision Settings is, “Set the font color”. Simply press the Pause/Resume Key (labeled (3) in the keypad overview) to change the fonts color to one of the many colors that have been loaded on your ULTIMA©. You can press the Start Key (labeled (4) in the keypad overview) to return to a previous choice in the list. You can view these adjustments on the video screen to see the font color you have currently selected. When finished with the

440012-001 Rev F 15

adjustment, first, press and hold the Shift Key (labeled (2) in the keypad overview) then, as you press and hold the Shift key tap the Shutdown Key (labeled (1) in the keypad overview) to return to Column Mode OR press and hold the Shift Key (labeled (2) in the keypad overview) then, as you press and hold the Shift key tap the Mode Key (labeled (5) in the keypad overview) to make the next available adjustment.

5. The next available adjustment in Low Vision settings is, “Set the background color”. Simply press the Pause/Resume Key (labeled (3) in the keypad overview) to change the video screen’s background to one of the many background colors that have been loaded on your ULTIMA©. You can press the Start Key (labeled (4) in the keypad overview) to return to a previous choice in the list. You can view these adjustments on the video screen to see the background color you have currently selected. When finished with the adjustment, first, press and hold the Shift Key (labeled (2) in the keypad overview) then, as you press and hold the Shift key tap the Shutdown Key (labeled (1) in the keypad overview to return to Column Mode OR press and hold the Shift Key (labeled (2) in the keypad overview) then, as you press and hold the Shift key tap the Mode Key (labeled (5) in the keypad overview) to make the next available adjustment.

6. The next available adjustment in Low Vision Settings is, “Set the highlight font color”. Simply press the Pause/Resume Key (labeled (3) in the keypad overview) to change the color of

440012-001 Rev F 16

highlighted words to one of the many colors that have been loaded on your ULTIMA©. You can press the Start Key (labeled (4) in the keypad overview) to return to a previous choice in the list. Your ULTIMA© will announce each color as you progress through the list. When finished with the adjustment, first, press and hold the Shift Key (labeled (2) in the keypad overview) then, as you press and hold the Shift key tap the Shutdown key (labeled (1) in the keypad overview) to return to Column Mode OR press and hold the Shift key (labeled (2) in the keypad overview) then, as you press and hold the Shift key tap the Mode key (labeled (5) in the keypad overview) to make the next available adjustment.

7. The next available adjustment in Low Vision Settings is, “Set the highlight background color”. Simply press the Pause/Resume Key (labeled (3) in the keypad overview) to change the color of a highlighted word’s background to one of the many colors that have been loaded on your ULTIMA©. You can press the Start Key (labeled (4) in the keypad overview) to return to a previous choice in the list. Your ULTIMA© will announce each color as you progress through the list. When finished with the adjustment, first, press and hold the Shift Key (labeled (2) in the keypad overview) then, as you press and hold the Shift key tap the Shutdown Key (labeled (1) in the keypad overview) to return to Column Mode OR press and hold the Shift Key (labeled (2) in the keypad overview) then, as you press and hold the Shift key tap the Mode Key

440012-001 Rev F 17

(labeled (5) in the keypad overview) to make the next available adjustment.

8. The next available adjustment in Low Vision Settings is, “Set highlight”. Simply press the Pause/Resume Key (labeled (3) in the keypad overview) to turn the highlighted word feature ON. You can press the Start Key (labeled (4) in the keypad overview) to turn the highlighted word feature OFF. Your ULTIMA© will announce each choice you have made using the keys. When finished with the adjustment, first, press and hold the Shift Key (labeled (2) in the keypad overview) then, as you press and hold the Shift key tap the Shutdown Key (labeled (1) in the keypad overview) to return to Column Mode OR press and hold the Shift Key (labeled (2) in the keypad overview) then, as you press and hold the Shift key tap the Mode Key (labeled (5) in the keypad overview) to test the screen display settings.

Press the Start Key (labeled (4) in the keypad overview) to watch the sample on the video screen as it is read. If all your adjustments are satisfactory, first, press and hold the Shift Key (labeled (2) in the keypad overview) then, as you press and hold the Shift key tap the Shutdown Key (labeled (1) in the keypad overview) to return to Column Mode. If you would like to make further adjustments, first, press and hold the Shift Key (labeled (2) in the keypad overview) then, as you press and hold the Shift key tap the Mode Key (labeled (5) in the keypad overview) to return to the first available adjustment and start again.

440012-001 Rev F 18

Snap-Line

The ULTIMA© can magnify text from a scanned page so that you may read the enlarged text in original, unedited format.

1. First, you must use the Mode Key (labeled (5) in the keypad overview) to change to magnification mode. The ULTIMA© will announce, “You are now in magnification mode.”

2. Press the Start Key (labeled (4) in the keypad overview) to scan the printed document. The ULTIMA© will announce, “Scanning in process, please wait.”

3. When the scanning is finished, an enlarged copy of the document will appear on the screen.

4. You may navigate through the magnified document using the ULTIMA© “Snap-Line” feature. To use this feature, read a line of magnified text by using your finger to move the document to the left until you reach the end of the line.

5. Once you have finished reading a line you can simply tap anywhere on the LEFT side of the screen to “snap back” to the beginning of the document.

440012-001 Rev F 19

Taking Care of ULTIMA©

To clean ULTIMA©, simply use the static free cloth provided to wipe down the screen and the scanners glass plate.

Traveling with ULTIMA©

ULTIMA© is easily moved from room to room or anywhere else you would like to bring your ULTIMA. After shutting the system down, simply fold the stand in the back of the unit up to form a handle.

Note: It is not necessary to lock the scanner after each use. However, if you move the scanner any significant distance or return it for service, be sure to re-lock it. Tore-lock the scanner, slide the lock on the bottom to the LEFT.

440012-001 Rev F 20

Warranty Information

Guerilla Technology, Inc. warrants that the media the software is recorded on, the product’s documentation and any hardware provided by Guerilla Technologies, are free from defects in materials and workmanship under normal use. Guerilla Technologies warrants that the product will perform substantially in accordance with the specifications set forth in the documentation and will process a specific sample data (the “scan test page”) with the specified standard of accuracy for the leading image scanners in proper working order. Some documents may be processed with a high degree of accuracy. However, poor quality documents, certain typefaces, complex layout, lower resolutions and poor quality or irregular image scanners may make it difficult or impossible for the product to process pages with satisfactory accuracy. As a result, Guerilla Technologies performance warranty is based on the system’s handling of the Scan Test Page. The warranties described above are made for a period of one (1) year from the date the products are delivered to you as the first user.

Guerilla Technologies will repair or replace any hardware, software, documentation or magnetic media that proves defective in materials, workmanship, or must be corrected to achieve warranted performance, without additional charge, on an exchange basis, as described below. If Guerilla Technologies is unable to replace defective hardware, documentation, or defective media, or if Guerilla Technologies is unable to make the product perform to its specifications within a reasonable time, Guerilla Technologies will either replace the entire

440012-001 Rev F 21

package with a similar product or refund the purchase price of the product.

Guerilla Technologies does not warrant that the product will meet your requirements or that its operation will be uninterrupted or error free. The warranty does not cover component or part of the product that has been subjected to damage or abuse, or that has been altered or changed in any way by you or others. Guerilla Technologies is not responsible for problems caused by any user supplied hardware, changes in the operating system, or any upgrades or modifications to these items that are made after the delivery of Guerilla Technologies product to you. Any implied warranties, including any warranties of merchantability or fitness for a particular purpose, are limited to the term of this express warranty. Note: Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you.

Guerilla Technologies shall not, in any case, be liable for special, incidental, consequential, indirect or other similar damages arising from any breach of these warranties even if Guerilla Technologies or its agent has been advised of the possibility of such damages. Note: Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you.

440012-001 Rev F 22

Troubleshooting ULTIMA©

Question: After pressing the Start Key, ULTIMA© does not scan and says nothing.

1. Check the scanner’s USB cable. The cable should be securely plugged into both the scanner and the ULTIMA©.

2. Check the Keypad’s USB cable. The cable should be securely plugged into one of the USB ports on either side of ULTIMA©.

3. Shutdown the ULTIMA© and check the power cable to make sure it is securely plugged into both the wall outlet and the unit outlet.

4. Check that the scanner is unlocked. Follow the steps outlined on page 4 to unlock the scanner.

5. If the keypad is not responding, restart the ULTIMA© by pressing the power button (labeled (1) on the Quick Start-up Guide)

If these solutions do not solve your problems, please contact your dealer or Guerilla Technologies, Inc. for further assistance.

The phone number for Guerilla Technologies technical assistance is:

(772) 283-0500

440012-001 Rev F 23

Keypad Functions Reference

Column Mode/Tabular Mode1 - Shutdown 2 - Shift 3 - Pause/Resume4 - Start5 - Mode

Low Vision Settings (LVS)1,2 - press and hold 1 then tap 2 to gointo or exit low vision settings

Font Size (LVS)3 - press to make font LARGER4 - press to make fontSMALLER2,5 - press and hold 2 then tap 5 to go to the next LV setting

Font Type (LVS)3 - press to change font style4 - press to return to a previous choice2,5 - press and hold 2 then tap 5 to go to the next LV setting

Font Color (LVS)3 - press to change font color4 - press to return to a previous choice2,5 - press & hold 2 then tap 5 to go to the next setting

440012-001 Rev F 24

Background Color (LVS)3 - press to change the background color4 - press to return to previous setting2,5 - press and hold 2 then tap 5 to go to the next LV setting

Highlight Font Color (LVS)3 - press to change the color of highlighted words4 - press to return to a previous choice in the list2,5 - press and hold 2 then tap 5 to go to the next LV setting

Highlight Background Color (LVS)3 - press to change the color of a highlighted word’s background4 - press to return to a previous choice in the list2,5 - press and hold 2 then tap 5 to go to the next LV setting

Set Highlight (LVS)3 - press to turn the highlighted word feature ON4 - press to turn the highlighted word feature OFF2,5 - press and hold 2 then tap 5 to go to the next LV setting

*Press 4 to watch the sample as it is read. If all your adjustments are satisfactory, press and hold 2 then tap 1 to return to Column Mode. If you would like to make further adjustments press and hold 2 then tap 5 to return to the first Low Vision Setting.

440012-001 Rev F 25

A few things you might not know about GTI:

We are the leading designer and manufacturer of reading machines for the print impaired community

We are proud to have given back to the community and have had our products appear on the television show Extreme Makeover Home Edition

Music legend Stevie Wonder is a very pleased customer

Guerilla Technologies, Inc.4203 SW High Meadows Avenue

Palm City, FL 34990

P: (772) 283-0500F: (772) 287-0960

www.guerillatechnologies.comsal@guerillatechnologies.com

440012-001 Rev F 26