53.2 mm - use45.7 mm - use43.2 mm - use

53.2 mm - use45.7 mm - use43.2 mm - use

??

Ensure there is no physical interference between the heatsinks and the circuit components as it may cause short circuit. Use tape to cover the circuit components when necessary.

Ensure there is no physical interference between the heatsinks and the circuit components as it may cause short circuit. Use tape to cover the circuit components when necessary.

3 4

5

3.5 mm

4.0 mm

4.0 mm

NVIDIA GeForce: GT 440

NVIDIA GeForce:GTX 650 Ti, GT 240, GT 220 (not LP), 9400 GT (not LP), 8500 GT (not LP), 7600 GS, 7200 GS (TC) AMD Radeon:HD 7790, 6770, 6750, 6670, 6670 (LP), 6570, 5770, 5550 (OEM), 4770, 4730, 4670, 4650, 4550, 4350 (LP), 3650, 3470, 3450, 2600 XT, 2600 Pro, 2400 XT, 2400 Pro, X1650 XT, X1650 Pro, X1600 XT,X 1600 Pro, X1550, X1300 XT, X1300 Pro, X1300

Choose the right mounting hole:Mounting Hole Compatible Models

①① 53.2 mm x 53.2 mm

②② 45.7 mm x 45.7 mm

③③ 43.2 mm x 43.2 mm

Spacer

Please note this table is for reference only. Refer to your own VGA card holes position during installation. The updated information is available at as1p.arctic.ac

Accessories

Preparation

1 2

Mixing Wand

Spacers (4.0 mm) (white)

Accelero S1 PLUSInstallation Manual

Instalační příručka: www.arctic.ac/fileadmin/as1p/manual_cz.pdfTelepítési kézikönyv: www.arctic.ac/fileadmin/as1p/manual_hu.pdfInstrukcja montażu: www.arctic.ac/fileadmin/as1p/manual_pl.pdfInstallatiehandleiding: www.arctic.ac/fileadmin/as1p/manual_nl.pdf

Montageanleitung: www.arctic.ac/fileadmin/as1p/manual_de.pdfGuide d’installation: www.arctic.ac/fileadmin/as1p/manual_fr.pdfManual de instalación: www.arctic.ac/fileadmin/as1p/manual_es.pdfManual de Instalação: www.arctic.ac/fileadmin/as1p/manual_pt.pdfInstallationsmanual: www.arctic.ac/fileadmin/as1p/manual_se.pdf

If your VGA card is using the 3 43.2 mm x 43.2 mm mounting hole

If X > 25 mm, use mounting clip in Orientation A.If X < 25 mm, use mounting clip in Orientation B.

Measure the distance between the bottom mounting hole and the edge of the card.Measure the distance between the bottom mounting hole and the edge of the card. Orientation A Orientation B

Must thoroughly mix the entire amount of compound of both bags for 5 minutes.Not mixing for 5 minutes will lead to no adhesiveness of the glue. Application has to be done within 15 minutes thereafter.

G-1 (White Compound 1.5 g) x 1G-1 (Grey Compound 1.5 g) x 1 VGA Bracket

x 4

SpacerSpacer

3.5 mm NVIDIA GeForce: GTX 650, GT 640

Washers

Not cleaning circuit components thoroughly with an eraser leads to no adhesiveness of the G-1.Not cleaning circuit components thoroughly with an eraser leads to no adhesiveness of the G-1.

x 1x 1x 1x 1

x 1

x 4

Spacers (3.5 mm) (black)

x 1

Heatsinks

A x 8

Heatsinks

B x 4

Screws (M2)

x 4

EN

NVIDIA GeForce:GTS 450, 250, 240 (OEM), 150 (OEM), GT 340, 330, 320, 130 (OEM), 9800 GTX+, 9800 GTX, 9800 GT, 9600 GT, 9600 GSO 512, 9600 GSO, 9500 GT (not LP), 8800 GTS 512 (G92), 8800 GTS (G92), 8800 GT, 8800 GS (9600GSO), 8600 GTS, 8600 GT GDDR3, 8600 GT DDR2, 7950 GT, 7900 GTX, 7900 GT, 7900 GS, 7800 GTX 512, 7800 GTX, 7800 GT, 7600 GT AMD Radeon:HD 6870, 6850, 6790, 5850, 5830, 4870, 4850, 4830, 3870, 3850, 3690, X1950 XTX, X1950 XT, X1950 Pro, X1950 GT, X1900 XTX, X1900 XT, X1900 GT, X1800 XT, X1800 XL, X1800 GTO

A x 6

Heatsinks

Tips for applying G-1RAM Cure time

5 hours

2 4Voltage regulator(apply glue generously)Voltage regulator(apply glue generously)

Apply pressure(10 sec)

3

WarrantyThis ARCTIC Product includes a six-year limited warranty. Please visit warranty.arctic.ac for further details.

The thermal compound is pre-applied to the heatsink of this cooler. If the cooler has to be installed a second time, we highly recommend MX-4 from ARCTIC. This is the only compound that can guarantees optimal performance in combination with the surface of our heatsinks.

Thermal Compound

Installation example on GTS 450

Installation of Accelero S1 PLUS

2

1

1

Install the heatsinks without touching the mounting plate. Apply G-1 on all circuit components.

Orientation A Orientation B

How to unplug PCI-E

© 2013 ARCTIC (HK) Ltd. All Rights Reserved.

No part of this manual including the products described in it, may be reproduced, transmitted, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purpose, without the express written permission of ARCTIC (HK) Ltd. In no event shall ARCTIC its directors or employees be liable for any indirect damages, incidental or consequential damages arising from any defect or error in this manual or product.

ARCTIC Switzerland AG

www.arctic.ac

B x 4

Heatsinks

Install the main cooler to the VGA card by fastening each screw alternately (screw A >B >C >D) with 1 clockwise rotation. Repeat until all 4 screws are tightened. Do not fasten the screws completely in one step.