web caterpillar a4aus 5 27 14 -...
TRANSCRIPT
isoflex.com.au
IsoFlex engine mounts for Caterpillar, featuring:
- High resistance to oil, fuel and water - Fail-safe design - No more stud failures with self-aligning adjusters
IsoFlex Engine Mounts for
Caterpillar Marine Engines
Caterpillar C18 Stand-alone Bobtail Engine
Designed to withstand the rigours of both commercial and pleasure vessels.
Caterpillar C18 and Generic Gearbox
MD128HD‐24DS
2 x MD125HD‐24DS Mounts (rear) 2 x M125XHD‐24S Mounts (front) ‐OR‐ 2 x MD128HD‐24DS Mounts (rear) 2 x M128XHD‐24S Mounts (front)
2 x MD125HD‐24DS Mounts (rear) 2 x M135HD‐24S Mounts (front) ‐OR‐ 2 x MD128HD‐24DS Mounts (rear) 2 x M138HD‐24S Mounts (front)
Caterpillar C18 Stand‐alone Bobtail Engine shown with: 2 x M135HD‐24S Mounts (rear) 2 x M135HD‐24S Mounts (front) OR 2 x M138HD‐24S Mounts (rear) 2 x M138HD‐24S Mounts (front) M135HD‐24S M138HD‐24S
IsoFlex offers a range of replacement mounts for Caterpillar marine engines, with numerous combinations to suit the application.
MD125HD‐24DS
M125XHD
2 x MD125XHD‐24DS Mounts (rear) 2 x MD125XHD‐24DS Mounts (front) ‐OR‐ 2 x MD128XHD‐24DS Mounts (rear) 2 x MD128XHD‐24DS Mounts (front)
Caterpillar C32 and Generic Gearbox
Contact IsoFlex for assistance in selecting the best mounting system for your application. Visit isoflex.com.au for data sheets and specific dimensions.
2 x MD125XHD‐24DS Mounts (rear) 2 x MD125XHD‐24SB Mounts (front) ‐OR‐ 2 x MD128XHD‐24DS Mounts (rear) 2 x MD128XHD‐24SB Mounts (front)
2 x MD125XHD‐24DS Mounts (rear) 2 x M135HD‐24S Mounts (front) Designed as a retro fit to original Barry mount installations. (Check front mount bolt centers).
Caterpillar C32 Stand-alone Bobtail Engine
2 x MD135HD‐24S Mounts (rear) 2 x MD135HD‐24S Mounts (front) ‐OR‐ 2 x M138HD‐24S Mounts (rear) 2 x M138HD‐24S Mounts (front)
MD128XHD‐24DS
MD125XHD‐24DS
MD125XHD‐24SB
MQ130XHD‐24SB
M135HD‐24S M138HD‐24S
2 x MQ130XHD‐24DS Mounts (rear) 2 x MD130XHD‐24SB Mounts (front) (ACE/Vulcan mount replacements)
IsoFlex Technologies Pty Ltd 33/75 Waterway Drive Gold Coast Marine Precinct Coomera, Queensland Australia 4209 Phone: 011 61 7 5556 0924 Fax: 011 61 7 5556 0984 E‐mail: [email protected]
MARINE COMMERCIAL DEFENCE MINING ELECTRONICS HYDRAULICS INDUSTRIAL MACHINERY
• Designed and configured to give at least 85% vibration isolation at worst case engine idle (4cyl and above) = less equipment fatigue, maintenance and associated noise.
• 10hp‐2500hp range. • 360 degree thrust resistance through patent pending co‐polymer
cores to provide seaway and thrust stability. • Fail‐safe design for safety in heavy seas and knockdowns. • Reduce overall harshness through the rev range by de‐sensitising
the system. • Easily reconfigured with 5 different shore hardness cores to
allow fine tuning. • Mounts can be easily reconfigured for different applications,
resulting in lower long‐term cost of ownership. • IsoFlex polymers are highly resistant to oil, fuels and water (no
rubber components). • Treated, high tensile engine studs provide durability and reduced
corrosion. • Tested to 6g forces in all axis including inversion; special mounts
tested to 10g. • DNV type certified.
Features & Benefits
Agent/Distributor:
www.isoflex.com.au www.isoflextech.com
IsoFlex High Performance Engine Mounts
DNV Certified
IsoFlex A4 5‐27‐14