weakcovrrcredirecnoths parameter

Upload: awansn1984

Post on 14-Apr-2018

215 views

Category:

Documents


0 download

TRANSCRIPT

  • 7/27/2019 WeakCovRrcRedirEcNoThs Parameter

    1/5

    WeakCovRrcRedirEcNoThs

    MO UFRC

    Parameter ID WeakCovRrcRedirEcNoThsParameter Name Ec/No threshold for RRC redirection in weak coverage

    NE BSC6900

    MML Command SET UFRC

    Meaning The cell signal quality is indicated by the Ec/No reported by UEs in the

    cell. If the value of Ec/No is lower than the threshold, the cell signal

    quality is poor, and the UEs are redirected to the neighboring GSM cell

    when the "PERFENH_RRC_WEAK_REDIR_SWITCH" parameter in the"SET UCORRMPARA" command is set to ON. Actual Value = (GUI

    Value - 49(offset)) x 0.5.IsKey NO

    Mandatory NO

    Feature ID WRFD-02040003

    Feature Name Inter System Redirect

    Value Type Interval Type

    GUI Value Range 0~49

    Enumeration

    Number/Bit

    Not involved

    Unit dB

    Actual Value

    Range

    -24.5~0

    Default Value 13

    Recommended

    Value

    13

    Initial Value

    Source

    Radio Planning (Internal planning)

    Impact RNC

    Parameter

    Relationship

    None

    Access Read & Write

    http://127.0.0.1:52199/hedex/pages/31185611/05/31185611/05/resources/mbsc/m-mml/set-ufrc.htmlhttp://127.0.0.1:52199/hedex/pages/31185611/05/31185611/05/resources/mbsc/m-mml/set-ufrc.htmlhttp://127.0.0.1:52199/hedex/pages/31185611/05/31185611/05/resources/mbsc/m-mml/set-ufrc.html
  • 7/27/2019 WeakCovRrcRedirEcNoThs Parameter

    2/5

    Service

    Interrupted After

    Modification

    No (And no impact on the UE in idle mode)

    Interruption Scope N/A

    InterruptionDuration(Min)

    N/A

    Caution None

    Validation of

    Modification

    The parameter modification has no impact on the equipment.

    Impact on Radio

    Network

    Performance

    None

    Introduced in

    Version

    BSC6900 V900R014

    Attribute Radio

    PTTHsupaTti

    MO UFRC

    Parameter ID PTTHsupaTti

    Parameter Name PTT HSUPA TTI type

    NE BSC6900

    MML Command SET UFRC

    Meaning TTI type used for the PTT services over the E-DCH.

    IsKey NO

    Mandatory NO

    Feature ID None

    Feature Name None

    Value Type Enumeration Type

    GUI Value Range EDCH_TTI_10ms, EDCH_TTI_2ms

    Enumeration EDCH_TTI_10ms~0, EDCH_TTI_2ms~1

    http://127.0.0.1:52199/hedex/pages/31185611/05/31185611/05/resources/mbsc/m-mml/set-ufrc.htmlhttp://127.0.0.1:52199/hedex/pages/31185611/05/31185611/05/resources/mbsc/m-mml/set-ufrc.htmlhttp://127.0.0.1:52199/hedex/pages/31185611/05/31185611/05/resources/mbsc/m-mml/set-ufrc.html
  • 7/27/2019 WeakCovRrcRedirEcNoThs Parameter

    3/5

    Number/Bit

    Unit None

    Actual Value

    Range

    EDCH_TTI_10ms, EDCH_TTI_2ms

    Default Value EDCH_TTI_2ms

    Recommended

    Value

    EDCH_TTI_2ms

    Initial Value

    Source

    Radio Planning (Internal planning)

    Impact RAB

    Parameter

    Relationship

    None

    Access Read & Write

    Service

    Interrupted After

    Modification

    No (And no impact on the UE in idle mode)

    Interruption Scope N/A

    Interruption

    Duration(Min)

    N/A

    Caution None

    Validation ofModification

    The parameter modification has no impact on the equipment.

    Impact on Radio

    Network

    Performance

    None

    Introduced in

    Version

    BSC6900 V900R012

    Attribute Radio

    DefaultSPIWeight

    MO UFRC

  • 7/27/2019 WeakCovRrcRedirEcNoThs Parameter

    4/5

    Parameter ID DefaultSPIWeight

    Parameter Name Default SPI Weight

    NE BSC6900

    MML Command SET UFRC

    Meaning This parameter is used to specify SPI Weight when the licence for SPI

    Weight-based differentiated services is disabled.

    IsKey NO

    Mandatory NO

    Feature ID WRFD-020806

    Feature Name Differentiated Service Based on SPI Weight

    Value Type Interval Type

    GUI Value Range 1~100

    Enumeration

    Number/Bit

    Not involved

    Unit %

    Actual Value

    Range

    0.01~1

    Default Value 100

    Recommended

    Value

    100

    Initial Value

    Source

    Radio Planning (Internal planning)

    Impact RNC

    Parameter

    Relationship

    None

    Access Read & Write

    Service

    Interrupted AfterModification

    No (And no impact on the UE in idle mode)

    Interruption Scope N/A

    Interruption

    Duration(Min)

    N/A

    Caution None

    http://127.0.0.1:52199/hedex/pages/31185611/05/31185611/05/resources/mbsc/m-mml/set-ufrc.htmlhttp://127.0.0.1:52199/hedex/pages/31185611/05/31185611/05/resources/mbsc/m-mml/set-ufrc.htmlhttp://127.0.0.1:52199/hedex/pages/31185611/05/31185611/05/resources/mbsc/m-mml/set-ufrc.html
  • 7/27/2019 WeakCovRrcRedirEcNoThs Parameter

    5/5

    Validation of

    Modification

    The parameter modification has no impact on the equipment.

    Impact on Radio

    Network

    Performance

    None

    Introduced in

    Version

    BSC6900 V900R012

    Attribute Radio