water supply scheme - vertical turbine pump

8/10/2019 Water Supply Scheme - Vertical Turbine Pump

1/35

Sl No QTY UNIT DESCRIPTION RATE Rs. PER AMOUNT Rs.

1 2 No Supply and delivery of vertical water lubricated Eachstatically, dynamically & hydraulically balanced turbine

pumpsetshaving a discharge of 12293 lpm against

a head of 32 metres due to all causes

conforming to IS 1710 as amended as on date with the

following accessories to suit the 7.M depth of well.

a) Bowl assembly with bronze impeller - 1 set

(required No.of stages)

b) Suitable mm dia S.S. Head shaft - 1 No.

c) Suitable mm dia S.S,. Line shaft 1.5m

length-required Nos.

d)Rubber line shaft bearing-required Nos.

e) C.I.bearing retainer-required Nos.

g) ERW suitable mm dia column pipe

(threaded.flanged) of 1.5m long- required Nos.h) G.M. Basket type strainer suitable mm dia- 1 No.

i) M.S.clamps suitable for column pipe line shaft - 2

sets.

j) Spanner - 1 set.

k)Safety clutch

Supply of suitable KW continuous rated vertical hollow

shaft, SPDP, class "F" insultation, squirrel cage

induction motor conforming to IS 325 for operation in

AC-3 phase/50 HZ +/- 5% / 415V +/- 10% supply with

inbuilt thrust bearing assembly and non reverse ratchet

assembly etc complete suitable for the above pump

and with stator winding suitable for variable frequency

drive, etc., complete.

2 2 Nos The pressure gauges for delivery Each 0

side are to be fixed on DELIVERYside of pump

with G.M. Cock and copper impulse tubing.

with a range of 0 to 25m, etc., complete.

3 2 Nos Supply and delivery of soft starter FCMA air cooled Each 0

suitable for the operation of the VT pumpset as quoted for

the above item (1)

and suitable for operation in AC-3 phase/50 HZ +/-5% ,

415V +/- 10% supply/with the following components etc,

complete.

i) Line contractors suitable for next standard higher

KW rating

ii) Over load relay

iii) Start/stop push button

iv) Indicator lamps 6 Nos.

v) Instruement panel with frequency

meter/Ammeter/Volt Meter.

SUPPLY ,DELIVERY,ERECTION AND COMMISSIONING OF VERTICAL TURBINE PUMPSET

COLLECTOR WELL -3

Page 1 of 35


2/35



COLLECTOR WELL -3

M.V. CUBICAL PANEL BOARD@BANK OF RIVER

4 1 No Supply and delivery of floor mounting type, weather, 0vermin and dust proof powder coated M.V. cubical

panel board of 14 SWG M.S. Sheet and MS angle

iron frame work with enclosed Aluminium busbar 4

Nos. of required current carrying capacity with all

internal wiring as per I.E. Rules,. The design of panel

board should facilitate for quick operation of all

switches from the front side. The panel board should

be completed with all internal wiring including

necessary twin copper earthing arrangements and

consists of the components for controlling incoming

and outgoing supply.

1 No 500 .AmpsMCCB TPNto recievel incoming supply

from T.N.E.B

1 No. 400. Amps MCCB to control outgoing supply toinf well pump room

1 No. 200. Amps MCCB to control APFC panel

1 Nos 63Amps MCCB to control outgoing supply to

walk way bridge lighting load

1 Nos 32Amps MCB to control indoor lighting

1 No. 400. Amps MCCB as spare

1 Nos 32Amps MCB as spare

1 No. 144mm square type..0 - 500.Amps digital

Ammeter with phase selector switch and slide lock

fuses.

1 No. 144mm square type.500 Volts digital Volt

meter with phase selector witch and slide lock

fuses.

1 No. Three phases 4 wire, digital KW Hr. Meter for

direct reading

1 No. 144mm square type digital P.F.Meter

5 Nos. RYB & ON/OFF indicating lamps with control

fuse/Switch

1 set C.T suitable for the instruments

M.V. CUBICAL PANEL BOARD@ WELL

5 1 No Supply and delivery of floor mounting type weather, 0

vermin and dust proof powder coated M.V. cubical











1 No 400 .AmpsM.C.C.B to recieve incoming supply

from PANEL AT RIVER BANK

Page 2 of 35


3/35



COLLECTOR WELL -3

2 Nos 400. Amps MCCB to control outgoing supply to

THEV./T Pumps thro starters with interlock1 Nos 32Amps MCB to control indoor lighting





fuses.



fuses.


direct reading



fuse/Switch1 set C.T suitable for the instruments

6 1 Job Providing twin earthing for all the starters 0

pumpsets and equipements in the pumproom as per

IE rules including construction of earth pit with RCC

slab

7 L.T.METERING BOX

1 No Supply of cubical type floor mounting type

of LT meter box with four compartments made 0

of 14SWG MS Sheet one compartment with copper bus bar

and other to accommodate EB meter third for fuse

carrier and 4th one for isolator

L.T. CABLES

8 40 m a) Supply and delivkery of runs 1.1 KV Grade 3.5 core 0

240.Sq.mm.PVC insulated and steel armoured

Aluminium cableconforming to IS 1554 to be laid in

between E B Pole to panel at bank of river

40 m b) Laying the above cable as per IE rules from the 0

panel board to the motor under item No. 1 through

starter

4 Nos c) Jointing the above cable including the cost of 0

jointing materials, lugs, cable clamp etc, complete

9 1120 m a) Supply and delivkery of runs 1.1 KV Grade 3.5 core 0

1run 400Sq.mm.PVC insulated and steel armoured


between panel at bank of river to panel at inf well

1120 m b) Laying the above cable as per IE rules f 0




30 Nos d)`Prviding suitable MS clamps in foot bridge 0

Page 3 of 35


4/35



COLLECTOR WELL -3

10 60 m a) Supply and delivery of 1.1KV grade 3 0

2X30 core.185.sq.mm. PVC insulated & steel armouredAluminium cable conforming to IS 1554 to be laid in

between LT panel Board and motor thro starter

60 m b) Laying the above cable as per IE rules (with any 0

elect equipments)




core.95.sq.mm. PVC insulated & steel armoured

Aluminium cable conforming to IS 1554 to be laid in

between MV panel to APFC unit and capacitor bank


elect equipments)

8 Nos c) Jointing the above cable including the cost of 0jointing materials, lugs, cable clamp etc, complete


core4 .sq.mm. PVC insulated & steel armoured


between LT panel Board andwalk way bridge lighting


elect equipments)



13 2 set

Supply and delivery of 60 KVAR ( 2 X 20 KVAR + 2 X 10

KVAR) 0

automatic power factor control unit (APFC) to maintain

0.95 power factor by auotomatic control of

capacitor banks to maintain system power factor

under varying load conditions with duly banked with

copper busbars of ample capacity cable gland unit

WATER METER

14 1 No Electronic water meter connected to converter to 0

give a remote indication of totalisation of flow rate

as well as on computer connectivity including

sensor and Totaliser for 600mm pipeline.

15 TOOLS

1 SET Providing the following tools mounted on Teak 0

wood Board to be fixed on the wall.

1 set 1 set 6mm to 32 mm double end spanner.

1 set 1 set 6mm to 32mm ring spanner.

1 set 1 set 250mm, 300mm Screw Driver

1 set 1 set 1 kg. 600 gms. Ball pane hammer with

wooden handle.

1 set 1 set 650mm, 750mm pipe wrenches.

1 set 1 No. 150mm Chain wrench.

Page 4 of 35


5/35



COLLECTOR WELL -3

16 1 set Supply and delivery of Safety appliances as 0

detailed below :1 No. 1 M x 1 M x 6mm thick Electrical quality

rubber mat to be placed in front of the Panel

Board and Rubber mate to lay in front of the

starter.

2 Nos,5 kg capacity chemical Powder dry type

fire extinguisher.

1 No. Shock treatment chart in Tamil

1 No. First aid Box.

2 Pairs of hand Gloves tested for 11 KV and

dusted with Chalk powder.

3Nos. 12 inches Fire Bucket hooked in MS

stand.

17 1 set Erection and testing of Pumping plants and electrical 0accessories including motors and pumps complete as

per IE rules

18 Supply of completion plan diagram out of which one

should be framed and to be fixed on the wall

PUMP HOUSE LIGHTING

17 1 SET Supply and delivery of 5 Ton capacity hand 0

operated over head travelling crane of girder type

suitable for a 10 m dia pumproom

19 1 set Providing pump house internal wiring and lighting as 0

per IE rules including D.B wiring materials with 3/20

PVC insulated copper wire PVC conduit pipes with

the following components.

6 Nos. 40W-120mm single box type fluorescent tube

lamps to be fixed on pattern holder.

3 sets 15/5 Amps 3 Pin plug with socket

1No. Portable inspection lamp with 100W bulb

lamp guard wooden handle and 25m long flexible wire.

20 8 no providing steet light 150 W sodium vapour lamp

with 6m length of 65 mm dia GI Pipe with pedesal

21 2 no

Supply and delivery of 400mm dia sluice valve of Non

rising

spindle with spur gear arrangement of 1.6 PN rating

conforming to IS

22 2 no Supply and delivery of 400mm dia Reflex valve

23 1 set Supply and delivey of pipes and specials including

laying and jointing etc complete as per annexure A

24 1 set Provision for obtaining power supply from TNEB

TOTAL Rs.

Rs 0.00

Page 5 of 35


6/35

















sets.

j) Spanner - 1 set.

k)Safety clutch









2 2 Nos The pressure gauges for delivery Each




3 2 Nos Supply and delivery of soft starter FCMA air cooled Each

suitable for the operation of the VT pumpset as quoted for

the above item (1)



complete.


KW rating

ii) Over load relayiii) Start/stop push button





AT COLLECTOR WELL-2

Page 6 of 35


7/35



AT COLLECTOR WELL-2

M.V. CUBICAL PANEL BOARD@BANK OF RIVER4 1 No Supply and delivery of floor mounting type, weather,













from T.N.E.B1 No. 400. Amps MCCB to control outgoing supply to

inf well pump room









fuses.



fuses.1 No. Three phases 4 wire, digital KW Hr. Meter for

direct reading



fuse/Switch



5 1 No Supply and delivery of floor mounting type weather,





internal wiring as per I.E. Rules,. The design of panelboard should facilitate for quick operation of all






Page 7 of 35


8/35



AT COLLECTOR WELL-2


from PANEL AT RIVER BANK2 Nos 400. Amps MCCB to control outgoing supply to

THEV./T Pumps thro starters with interlock






fuses.



fuses.


direct reading

1 No. 144mm square type digital P.F.Meter5 Nos. RYB & ON/OFF indicating lamps with control

fuse/Switch


6 1 Job Providing twin earthing for all the starters



slab

7 L.T.METERING BOX


of LT meter box with four compartments made


and other to accommodate EB meter third for fusecarrier and 4th one for isolator

L.T. CABLES

8 40 m a) Supply and delivkery of runs 1.1 KV Grade 3.5 core




40 m b) Laying the above cable as per IE rules from the


starter

4 Nos c) Jointing the above cable including the cost of


9 1120 m a) Supply and delivkery of runs 1.1 KV Grade 3.5 core1run 400Sq.mm.PVC insulated and steel armoured



1120 m b) Laying the above cable as per IE rules f




30 Nos d) Prviding suitable MS clamps in foot bridge

Page 8 of 35


9/35



AT COLLECTOR WELL-2

10 60 m a) Supply and delivery of 1.1KV grade 32X30 core.185.sq.mm. PVC insulated & steel armoured



60 m b) Laying the above cable as per IE rules (with any

elect equipments)



11 20 m a) Supply and delivery of 1.1KV grade 3





elect equipments)8 Nos c) Jointing the above cable including the cost of


12 500 m a) Supply and delivery o f 1.1KV grade 3





elect equipments)



13 2 set

Supply and delivery of 60 KVAR ( 2 X 20 KVAR + 2 X 10

KVAR)automatic power factor control unit (APFC) to maintain





Page 9 of 35


10/35



AT COLLECTOR WELL-2

WATER METER

14 1 No Electronic water meter connected to converter togive a remote indication of totalisation of flow rate



15 TOOLS

1 SET Providing the following tools mounted on Teak






wooden handle.



16 1 set Supply and delivery of Safety appliances as

detailed below :

1 No. 1 M x 1 M x 6mm thick Electrical quality



starter.


fire extinguisher.





3Nos. 12 inches Fire Bucket hooked in MSstand.

Page 10 of 35


11/35



AT COLLECTOR WELL-2

17 1 set Erection and testing of Pumping plants and electrical

accessories including motors and pumps complete asper IE rules

17 1 SET Supply and delivery of 5 Ton capacity hand





PUMP HOUSE LIGHTING

19 1 set Providing pump house internal wiring and lighting as



the following components.6 Nos. 40W-120mm single box type fluorescent tube







21 2 no Supply and delivery of 400mm dia sluice valve of Non rising


conforming to IS





TOTAL Rs.

Rs

Page 11 of 35


12/35

















sets.

j) Spanner - 1 set.

k)Safety clutch













3 2 Nos Supply and delivery of soft starter FCMA air cooled Each

suitable for the operation of the VT pumpset as quoted for the

above item (1)



complete.


KW rating

ii) Over load relayiii) Start/stop push button





AT COLLECTOR WELL-1

Page 12 of 35


13/35



AT COLLECTOR WELL-1

M.V. CUBICAL PANEL BOARD@BANK OF RIVER

4 1 No Supply and delivery of floor mounting type, weather,vermin and dust proof powder coated M.V. cubical












from T.N.E.B

1 No. 400. Amps MCCB to control outgoing supply toinf well pump room









fuses.



fuses.

1 No. Three phases 4 wire, digital KW Hr. Meter fordirect reading



fuse/Switch



5 1 No Supply and delivery of floor mounting type weather,






board should facilitate for quick operation of allswitches from the front side. The panel board should






from PANEL AT RIVER BANK

Page 13 of 35


14/35



AT COLLECTOR WELL-1

2 Nos 400. Amps MCCB to control outgoing supply to

THEV./T Pumps thro starters with interlock1 Nos 32Amps MCB to control indoor lighting





fuses.



fuses.


direct reading



fuse/Switch1 set C.T suitable for the instruments

6 1 Job Providing twin earthing for all the starters



slab

7 L.T.METERING BOX


of LT meter box with four compartments made


and other to accommodate EB meter third for fuse

carrier and 4th one for isolator

L.T. CABLES







starter




1run 400Sq.mm.PVC insulated and steel armoured

Aluminium cableconforming to IS 1554 to be laid inbetween panel at bank of river to panel at inf well

1120 m b) Laying the above cable as per IE rules f




30 Nos d) Prviding suitable MS clamps in foot bridge

Page 14 of 35


15/35



AT COLLECTOR WELL-1

10 60 m a) Supply and delivery of 1.1KV grade 32X30 core.185.sq.mm. PVC insulated & steel armoured




elect equipments)















elect equipments)



13 2 set Supply and delivery of 60 KVAR ( 2 X 20 KVAR + 2 X 10 KVAR)automatic power factor control unit (APFC) to maintain





Page 15 of 35


16/35



AT COLLECTOR WELL-1

WATER METER

14 1 No Electronic water meter connected to converter togive a remote indication of totalisation of flow rate



15 TOOLS

1 SET Providing the following tools mounted on Teak






wooden handle.




detailed below :




starter.


fire extinguisher.





3Nos. 12 inches Fire Bucket hooked in MSstand.

Page 16 of 35


17/35



AT COLLECTOR WELL-1


accessories including motors and pumps complete asper IE rules






PUMP HOUSE LIGHTING




the following components.6 Nos. 40W-120mm single box type fluorescent tube







21 2 no Supply and delivery of 400mm dia sluice valve of Non rising


conforming to IS





TOTAL Rs.

Rs

Page 17 of 35


18/35

Sl No QTY UNIT DESCRIPTION RATE Rs. PER AMOUNTRs.

1 3 No Supply and delivery of vertical water lubricated Each

statically, dynamically & hydraulically balanced turbine

pumps when 2 Nos units running parallel should

have acombined discharge of 36879lpm againsta head of 70M ( and 1 Nos as standbye )


following accessories to suit the suction sump.








f) 100 lit. Sintex pre lubricating tank with 20mm PVC

Rigid pipe connection with G.M. Gate valve-1 set.


(threaded.flanged) of 1.5m long- required Nos.

h) G.M. Basket type strainer suitable mm dia- 1 No.i) M.S.clamps suitable for column pipe line shaft - 2sets.

j) Spanner - 1 set.

k)Safty clutch

l) Suction strainer

Duty of each pump18440 lpmX70 M head


shaft SPDP class "F" insultation, squirrel cage


AC-3 phase/50 HZ +/-5% / 415V +/-10% supply with




drive and complete





3 3 Nos Supply and delivery of soft starter (FCMA air cooled) Each

suitable for the operation of the VT pumpset as quoted

suitable for operation in AC-3 phase/50 HZ +/-5% ,

415V +/-10% supply/with the following components etc,

complete.


KW rating

ii) Over load relay

iii) Start/stop push buttoniv) Indicator lamps 6 Nos.

v) Instrument panel with frequency


SUPPLY ,DELIVERY,ERECTION AND COMMISSIONING OF VERTICAL TURBINE PUMPSET AT T

-SUMP

Page 18 of 35


19/35



-SUMP

4 HT - VCB Panel:

1 set Supply and delivery of 3 compartment VCB panel

capable of operating at 11KV supply with necessary

controls, relays and meterings with 1 No. VCB

for TNEB incomer and 2 Nos. VCBs for 2 Nos. ofstep down transformers including necessary battery

banks, earthing, etc., complete as per IE rules.

POWER TRANSFORMER (IS 2026)

5 2 sets Supply and delivery of1200 KVA 11 kv/ 433V

3 phase 50 HZ double wound, oil

immersed, natural air cooled, core type, continuous

rating, outdoor distribution power transformer with

copper winding for voltage ratio 22-11KV/433 volts

between phases with neutral brought out at LV side.

The transformer shall be contained in a mild steel

plain & radiator cooled tank, conforming to IS 2026

with off-load tap switch for # 10% and # 5% on HV

side. The temp of coolant oil should not exceed 45 degrees

C and of winding by measurement of resistance shallnot exceed 50 o over an ambier temp of 50 o C ....

The transformer shall be supplied with first filling of oil

consisting of the following fittings and accessories.

1. Inspection cover

2.Rating plate

3.Terminal marking plate

4.Two earthing terminals

5.Two lifting hooks

6.Bottom drain filter valve with plug

7.Dehydrating breather with silicagel and oil seal

8.Oil level indicator with minimum and filling level

markings

9.Thermometer pocket with plug

10. 100mm dial stem type oil temperature indicator

11.Oil conservator with drain valve & plug

12.Oil filling hole with plug on conservator

13. Air release hole with plug

14.Top filter valve with plug

15.Externally operated off circuit tap changing switch

with locking device & keys

16.Under base skids with unidirectional flat

17.H.V. Terminals-bushings

18.L.V. Terminals cable box

19.LV additional neutral outdoor bushing

20.Explosion vent with single diaphragm.




6 2 Nos Transformer plinth

Construction of Transformer plinths as per IE Rules

including all necessary materials.

7 1 set Copper earthing for above 250 KVA

Providing necessary copper earthing for the

Transformer sub stations as per IE rules including

construction of Earth pit, neutral earthing for the

Transformers conforming to CEIG rules and

regulations.

Page 19 of 35


20/35



-SUMP

8 1 Job Transformer fencing:

Providing chain link fencing for the Transformer sub

station as per IE

rules including supply and fixing of MS gates withlocking arrangement. The fencing should be painted

with the two coats of Aluminium paint. The

transformer yard should be provided with 40mm HBG

metals around the plinth and proper concrete flooring

in the remaining area conforming to IE rules.

9 2 sets Erection of transformers as per IE rules

10 40 m a) Supply and delivery of 1500Amps Aluminium

Bus bar Trunking to be laid between Trasformer

to Panel Board erected inside the control room.

40 m b) Erection of the Bus bar trunking as per IE rules between

the supply point and LT panel Board

4 Nos c) Jointing forbus bar including the cost of jointing

materials lugs, cable clamps etc, complete.

M.V. CUBICAL PANEL BOARD

11 1 No Supply and delivery of f loor mounting type, weather,

vermin and dust proof, powder coated M.V. cubical











2 Nos2000 Amps ACB to control incoming supply from

the 2 Nos. of the Transformes with interlocking

3 Nos1000 Amps MCCB to control outgoing supply to

pumps with interlocking so that to operate our at a time

1 Nos 400Amps MCCB to APFC panel & capacitor banks.

2 Nos32 Amps MCB to control outgoing supply to

Transformer yard lighting

1 No32 Amps MCB to indoor lighting DB1 Nos 1000Amps MCCB as spare1 No32 Amps MCB as spare



fuses.


meter with phase selector witch and slide lockfuses.


direct reading



fuse/Switch


12 1 set Supply and delivery of ( APFC Unit)

automatic power factor control unit to maintain 0.95

power factor by auotomatic control of


Page 20 of 35


21/35



-SUMP



etc complete

with suitable breakers with sets of capacitor banks

of 3 X 200 KVAR ( each 200 KVAR bank shall be in 4 X 40KVAR +4 X 10 KVAR units )capacitors

for easy replacement in case of fuse-offs.

13 1 Job Providing twin earthing for all the starters each



slab

L.T. CABLES

14 180 m a) Supply and delivery of 2 runs 1.1 KV Grade 3 core

3NoX2runs30 400.Sq.mm.PVC insulated and steel armoured


between panel board to the motor given under item

No. 1 through starter.



starter






betweenstarterd and Automatic power factor

control Unit.


elect equipments)




core 4.sq.mm. PVC insulated & steel armoured


between LT panel Board and transformer yard lighting


elect equipments)






WATER METER18 1 No Electronic water meter connected to converter to



sensor and Totaliser for 600mm dia.

19 TOOLS

1 set Providing the following tools mounted on Teak






Page 21 of 35


22/35



-SUMP

wooden handle.



20 1 set Supply and delivery of Safety appliances asdetailed below :




starter.

1 No. Earth Discharge rod with copper wire

1 No. 1000V Meggar

2 Nos, 2 kg capacity chemical Powder dry type

fire extinguisher.





2 Nos. 12 inches Fire Bucket hooked in MS

stand.


accessories including motors and pumps complete as

per IE rules

22 1 Job Preparation of CEIG Drawing and obtaining approval of

CEIG including submission of completion report and

rectification report



PUMP HOUSE LIGHTING







2 Nos. AC Ceiling fans 1200mm sweep

2 Nos. AC Exhaust fans 450mm



lamp guard wooden handle and 25m long f lexible wire.


with 6m length of 65 mmdia GI Pipe with pedesal

in the Transformer yard

Page 22 of 35


23/35



-SUMP

26 3 no Supply and delivery of 400mm dia sluicevalve of Non rising


conforming to IS

27 3 no Supply and delivery of400mm dia Reflex valve



conforming to IS





TOTAL

0.00

Page 23 of 35


24/35





have acombined discharge of 28580 Lpm againsta head of 81 M ( and 2 Nos as standbye )














h) G.M. Basket type strainer suitable mm dia- 1 No.

i) M.S.clamps suitable for column pipe line shaft - 2sets.

j) Spanner - 1 set.

k)Safty clutch

l) Suction strainer

Duty of each pump 7145 lpmX81 M head








drive and complete

2 6 Nos The pressure gauges for delivery Eachside are to be fixed on DELIVERYside of pump







complete.


KW rating

ii) Over load relay



v) Instrument panel with frequencymeter/Ammeter/Volt Meter.

4 HT - VCB Panel:

1 set Supply and delivery of 3 compartment VCB panel

capable of operating at 11KV supply with necessary

controls, relays and meterings with 1 No. VCB

for TNEB incomer and 2 Nos. VCBs for 2 Nos. of

step down transformers including necessary battery

banks, earthing, etc., complete as per IE rules.


Page 24 of 35


25/35




5 2 sets Supply and delivery of 2000 KVA 11 kv/ 433V


immersed, natural air cooled, core type, continuousrating, outdoor distribution power transformer with

copper winding for voltage ratio 22-11KV/433 volts






C and of winding by measurement of resistance shall

not exceed 50 o over an ambier temp of 50 o C ....



1. Inspection cover

2.Rating plate



5.Two lifting hooks

6.Bottom drain filter valve with plug



markings











18.L.V. Terminals cable box19.LV additional neutral outdoor bushing








7 1 set Copper earthing for above 250 KVA

Providing necessary copper earthing for the



Transformers conforming to CEIG rules andregulations.



station as per IE

rules including supply and fixing of MS gates with

locking arrangement. The fencing should be painted

with the two coats of Aluminium paint. The




Page 25 of 35


26/35





Bus bar Trunking to be laid between Trasformerto Panel Board erected inside the control room.






11 1 No Supply and delivery of floor mounting type, weather,













the 2 Nos. of the Transformes with interlocking

6 Nos800 Amps MCCB to control outgoing supply to

pumps with interlocking so that to operate our at a

time

1 Nos 400Amps MCCB to APFC panel & capacitor

banks.


Transformer yard lighting1 No32 Amps MCB to indoor lighting DB1 Nos 800Amps MCCB as spare

1 No32 Amps MCB as spare1 No. 144mm square type..0 - 500.Amps digital


fuses.



fuses.


direct reading



fuse/Switch


12 1 set Supply and delivery of (APFC Unit)

automatic power factor control unit to maintain 0.95power factor by auotomatic control of




etc complete


of 6 X 160 KVAR ( each 160KVAR bank shall be in 3

X40 KVAR + 2 X 20 KVAR units )capacitors

for easy replacement in case of fuse-offs.



Page 26 of 35


27/35




slab

L.T. CABLES

14 360 m a) Supply and delivery of 2 runs 1.1 KV Grade 3 core6NoX2runs30 300.Sq.mm.PVC insulated and steel armoured


between panel board to the motor given under item




starter







control Unit.


elect equipments)








elect equipments)




operated over head travelling crane of girder typesuitable for a 10 m dia pumproom

WATER METER

18 1 No Electronic water meter connected to converter to




19 TOOLS






1 set 1 set 1 kg. 600 gms. Ball pane hammer withwooden handle.




detailed below :




starter.


1 No. 1000V Meggar

Page 27 of 35


28/35



2 Nos, 2 kg capacity chemical Powder dry type

fire extinguisher.



2 Pairs of hand Gloves tested for 11 KV anddusted with Chalk powder.


stand.

Page 28 of 35


29/35





per IE rules

22 1 Job Preparation of CEIG Drawing and obtaining approval ofCEIG including submission of completion report and




PUMP HOUSE LIGHTING








2 Nos. AC Exhaust fans 450mm3 sets 15/5 Amps 3 Pin plug with socket






26 6 no Supply and delivery of 400 mm dia sluicevalve of Non ris ing


conforming to IS

27 6 no Supply and delivery of 400 mm dia Reflex valve

28 1 no Supply and delivery of 750mm dia sluicevalve of Non ris ing

spindle with spur gear arrangement of 1.6 PN ratingconforming to IS





TOTAL

SAY Rs

Page 29 of 35


30/35





have acombined discharge of 17364 Lpm againsta head of 22M ( and 1 Nos as standbye )














h) G.M. Basket type strainer suitable mm dia- 1 No.i) M.S.clamps suitable for column pipe line shaft - 2sets.

j) Spanner - 1 set.

k)Safty clutch

l) Suction strainer

Duty of each pump 8682 lpmX 22 M head








drive and complete









complete.


KW rating

ii) Over load relay


iv) Indicator lamps 6 Nos.v) Instrument panel with frequency



Page 30 of 35


31/35




5 2 sets Supply and delivery of 800 KVA 11 kv/ 433V


immersed, natural air cooled, core type, continuous

rating, outdoor distribution power transformer withcopper winding for voltage ratio 22-11KV/433 volts






C and of winding by measurement of resistance shall

not exceed 50 o over an ambier temp of 50 o C ....



1. Inspection cover

2.Rating plate



5.Two lifting hooks6.Bottom drain filter valve with plug



markings











18.L.V. Terminals cable box19.LV additional neutral outdoor bushing





SIX POLE STRUCTURE

1 set Supply delivery of six pole structure with suitable size

RSJwith all structures complete as pper CEIG norms




7 1 set Copper earthing for above 250 KVAProviding necessary copper earthing for the



Transformers conforming to CEIG rules and

regulations.

Page 31 of 35


32/35





station as per IE

rules including supply and fixing of MS gates with

locking arrangement. The fencing should be paintedwith the two coats of Aluminium paint. The






Bus bar Trunking to be laid between Trasformer

to Panel Board erected inside the control room.






11 1 No Supply and delivery of f loor mounting type, weather,













the 2 Nos. of the Transformes with interlocking6 Nos 400 Amps MCCB to control outgoing supply to

pumps with interlocking so that to operate our at a time

1 Nos 200Amps MCCB to APFC panel & capacitor banks.


Transformer yard lighting

1 No32 Amps MCB to indoor lighting DB1 Nos 400Amps MCCB as spare1 No32 Amps MCB as spare



fuses.



fuses.

1 No. Three phases 4 wire, digital KW Hr. Meter fordirect reading



fuse/Switch


Page 32 of 35


33/35



12 1 set Supply and delivery of (APFC Unit)

automatic power factor control unit to maintain 0.95

power factor by auotomatic control of


under varying load conditions with duly banked withcopper busbars of ample capacity cable gland unit

etc complete


of 6 Nos X 75 KVAR




slab

L.T. CABLES

14 180 m a) Supply and delivery of 1.1 KV Grade 3 core

6NoX30m 300.Sq.mm.PVC insulated and steel armoured

Aluminium cable conforming to IS 1554 to be laid inbetween panel board to the motor given under item




starter




core150.sq.mm. PVC insulated & steel armoured



control Unit.









elect equipments)






WATER METER

18 1 No Electronic water meter connected to converter to




Page 33 of 35


34/35



19 TOOLS




1 set 1 set 6mm to 32mm ring spanner.1 set 1 set 250mm, 300mm Screw Driver


wooden handle.




detailed below :




starter.


1 No. 1000V Meggar

2 Nos, 2 kg capacity chemical Powder dry typefire extinguisher.






stand.



per IE rules

22 1 Job Preparation of CEIG Drawing and obtaining approval of

CEIG including submission of completion report and




PUMP HOUSE LIGHTING






lamps to be f ixed on pattern holder.


2 Nos. AC Exhaust fans 450mm


1No. Portable inspection lamp with 100W bulblamp guard wooden handle and 25m long flexible wire.




Page 34 of 35


35/35



26 6 no Supply and delivery of 400 mm dia sluicevalve of Non rising


conforming to IS

27 6 no Supply and delivery of 400 mm dia Reflex valve



conforming to IS





TOTAL

SAY Rs

water supply scheme - vertical turbine pump

Documents