water resistant adhesives
TRANSCRIPT
8/8/2019 Water Resistant Adhesives
http://slidepdf.com/reader/full/water-resistant-adhesives 1/9
WATER RESISTANT ADHESIVES
Polyvinyl Acetate Adhesive
Our polyvinyl acetate Adhesive have the following properties:
Stabilization:
Polyvinyl alcohol contains coalescing agent.
Recommended Application Areas:
Water resistant wood glues according to DIN
EN 204 durability class D3 or D4 together with isocyanate cross linkers
Specifications:
These technical data are determined for each lot before finally being released by our quality
control laboratory:
As per DIN EN 23 270 standards, water resistant adhesive is dried under standard
atmospheric conditions at 23° and 50% relative humidity. Considering the fact that
dispersion contains coalescing agents the above values depend on the storage time of the
dispersion film.
WOOD ADHESIVES
8/8/2019 Water Resistant Adhesives
http://slidepdf.com/reader/full/water-resistant-adhesives 2/9
Synthetic Wood Adhesives
The salient features of our high quality wood adhesives are:
Bond Strength:
Solids content: 45-46%
Viscosity (RVT/SP-7/20/250C): 300-350
pH Value: 4-6
Free Monomer (%): 0.3 max
Film Properties: Clear
Particles Size: 0.8-1 micron
Stability: Year storage (under normal conditions)
Coverage: 37-40 sq. ft./Kg
Specifications:
Wood/Wood: 200-225 Kgf
Plywood/Laminate: 200-225 Kgf
Dry Strength (Kgf) (Ave): 310
Mycological Test: Pass the test
Early Strength (Kgf) (Ave): 290
Our wood adhesive is available in all types of packing and sizes such as: 250 gm, 500 gm, 1
kg, 2 kg, 5 kg, 10 kg, 20 kg, 30 kg, 50 kg.
Evostik Waterproof Wood Adhesive
This wonderful glue by Evo Stick, is suitable for all paper/wood type applications, itworks on chipboard, plywood, MDF sterlingboard, and any other material which is wood or paper based. It sticks like errr - glue. and does not take that long to dry (needs clamping or screwing while it does)
8/8/2019 Water Resistant Adhesives
http://slidepdf.com/reader/full/water-resistant-adhesives 3/9
This is a modern chemical glue, in the old days it would be an animal glue, made from bits of horses and fish, this is not the case nowadays. It comes in the usual plastic squeezy type bottles, which are flat, this means they don't roll awayif you knock them over. The caps on these are not that good but you can stick a nail in the top.There are two types, waterproof, and non waterproof, personally I just ust the former, if I boughtboth types, one would go off on me as I do not use that much.
Prices - (as per B&Q) The waterproof version comes in at £4.18 for 250ml. the 500ml is £6.48,the one litre costs £9.47, and the massive 2.5 litre is just £15.97.
Now for the non waterproof type. This is available in just two suzes, 500ml is £5.78 and the fullone litre costs £8.47, as you can see the non waterproof is a little cheaper.
This glue makes a brilliant gap filler, you can even mix it with sawdust to fill cracks which do notshow up. When the glue has hardened, it can be sanded, filed, or even drilled, although youmust bear in mind that it will stop wood from taking stain, so remove exess. PVA glue is a very watered down version of this, so if you need to mix some with water for thekids, it is no problem. You must avoid getting this on clothes though. The Evo Stick is available at pretty much every DIY store nowadays, and very often at
Woolworths, Wilkinsons etc. It is a milky white liquid, which is ran between both surfaces, the materials are then broughttogether & clamped, or otherwise fixed together, any exess should be wiped off with a moist ragwhile still wet,. When dry, the join is perfect, and very strong. I recommend this product, as Itend to do with most of my reviews. Don't get me wrong, if I dislike something I will say so, but inmost cases I use what I like and this makes me feel qualified to do a review.
I do appreciate that this is a short review, but I don't believe in waxing lyrical just to fill a box with
things people do not wish to read.
Waterproof Wood Glue 4ozUse: HardwareType: Pourable, WoodFeatures: Water Proof Size: 4 oz.Package Count: 1
Product Description:Ideal for all woodworking projects. ANSI Type I waterproof. Strong initial tack and superior strength.Easier sanding and paintability. Non-toxic and no harmful fumes. Easy to clean-up with water. Exterior quality
8/8/2019 Water Resistant Adhesives
http://slidepdf.com/reader/full/water-resistant-adhesives 4/9
Waterproof Wood Glue 16ozUse: Hardware
Type: Pourable, WoodFeatures: Water Proof Size: 16 oz.Package Count: 1
Product Description:Ideal for all woodworking projects. ANSI Type I waterproof. Strong initial tack and superior strength.Easier sanding and paintability. Non-toxic and no harmful fumes. Easy to clean-up with water. Exterior quality
Waterproof Wood Glue 8ozUse: HardwareType: Pourable, WoodFeatures: Water Proof Size: 8 oz.Package Count: 1
Product Description:Ideal for all woodworking projects. ANSI Type I waterproof. Strong initial tack and superior strength.Easier sanding and paintability. Non-toxic and no harmful fumes. Easy to clean-up with water. Exterior quality
8/8/2019 Water Resistant Adhesives
http://slidepdf.com/reader/full/water-resistant-adhesives 5/9
Everbuild 502 All Purpose Waterproof Wood Adhesive 5Ltr
All Purpose Waterproof Wood Adhesive is a high quality, resin based wood
adhesive for all wood bonding. It can be used internally and externally andprovides a high strength, impact resistant bond that is usually stronger thanthe wood itself. Ideal for all general woodworking and joinery uses, furnitureassembly and household DIY use. Dries clear. Fast cure, initial set in just 10minutes. Conforms to the international standard EN 204 (D3) and BS 4071 forcreep resistance.
y Waterproofs
y Easy water clean up
y Solvent free
8/8/2019 Water Resistant Adhesives
http://slidepdf.com/reader/full/water-resistant-adhesives 6/9
y Quick curing/drying
y Overpaintable when cured
y Interior and exterior use
y Creep resistant for stress joints
Everbuild All Purpose Waterproof Wood Adhesive 502 125ml
All purpose waterproof wood adhesive is a medium
viscosity, resin based polymer emulsion which exceeds the water resistance requirements of en204d3.
the product is also suitable for load bearing work as it conforms fully to the bs4071 creep resistance
requirements. Benefits- excellent rate of bond strength development- high degree of water resistance. d3
classification - joints may be subject to short term water contact or exposure to high humidity-
interior/exterior use- low timber staining characteristics - will not stain- creep resistant- dries clear -
contains no inert fillers- water based - environmentally friendly/easy clean up- suitable for radio frequencycure.areas for use- as a waterproof/creep resistant wood adhesive, internally and externally.125ml.
8/8/2019 Water Resistant Adhesives
http://slidepdf.com/reader/full/water-resistant-adhesives 7/9
y All Purpose Waterproof Wood Adhesive is a medium viscosity, resin based polymer
emulsion which exceeds the water resistance requirements of EN204D3. The product is alsosuitable for load bearing work as it conforms fully to the BS4071 Creep Resistancerequirements.
y Benefitsy Excellent rate of bond strength developmenty High degree of water resistance. D3 Classificationy joints may be subject to short term water contact or exposure to high humidityy Interior/Exterior usey Low timber staining characteristicsy will not stainy Creep Resistanty Dries cleary
contains no inert fillersy Water basedy environmentally friendly/easy clean upy Suitable for radio frequency cure.y Areas for Usey As a waterproof/creep resistant wood adhesive, internally and externally.y 500ml
y Quick Details
Usage: Woodworking
y Specifications
y DESCRIPTION
Excellent adhesive for wood to wood or wood to metal , stone and concrete and for some
synthetic materials bonding.
8/8/2019 Water Resistant Adhesives
http://slidepdf.com/reader/full/water-resistant-adhesives 8/9
y DESCRIPTION
Excellent adhesive for wood to wood or wood to metal , stone and concrete and for some
synthetic materials bonding.
PROPERTIES
Initial drying : app , 20 min, 30 min
Viscosity adhesion resistance : 50 kg / cm3
Colour : amber
Heat resistance : -25 C / 115 C
APPLICATIONS
After applying material on pieces to be adhered as as thin filmy layer pressing must be done in
min.max
Waterproof Adhesive
Among the various types of adhesives we can find the waterproof adhesives. What are these adhesives? As the name
says it, these are adhesives resistant to water. Until now, people had problems because of the water. This need lead
to the invention of these adhesives. Now, we use them everywhere in our homes. This adhesive can create a resistant
bond between numerous porous and less porous materials. This adhesive is mainly designed for severe service
applications. Made of a powdered catalyst and a liquid resin, the waterproof adhesive is im pervious to salt or water.
Also, it is immune to oil, grease and solvents or to high tem peratures. These things made the waterproof adhesive
very popular.
Believe it or not, these adhesives find their roots to ocean creatures. There are numerous sea creatures that have been
clinging under water in a natural way for millennia. We are talking about the mollusks. The feet of these creatures
produce some substances that have adhesive-like properties. These substances are sometimes better that most of the
glues available on the market today. Unfortunately it would take thousands of mollusks to produce just a small
quantity of waterproof adhesive. The costs would be also huge.
The domains that use waterproof adhesives are various. The Navy and the marine industry are probably the best
consumers. Because the salt that is contained in the sea water can break down most of the adhesives, they need very
strong waterproof adhesives. They use it to build or to repair their ships. The building industry is an im portant
consumer too. They require strong cementing adhesives for manufacturing different materials that usually
deteriorate in contact with water.Also, the dental industry uses a certain kind of waterproof adhesive. They need it
for dentures and in other domains that require suture prosthetic technologies. Scientists now try to find ways to
produce adhesives that look like the ones that the mollusks use. If they will succeed, we will have a better and
natural waterproof adhesive, which will remain intact in contact with water and any other fluids.
8/8/2019 Water Resistant Adhesives
http://slidepdf.com/reader/full/water-resistant-adhesives 9/9
If you ever want to use a waterproof adhesive, you need to know that you need special cloths, facial and hand
protection. They can sometimes be toxic, and it is better to use gloves and facial protection. The adhesive must be
prepared at home or at your work place. You will have some instructions, that will help you mix it and to apply it
right.