watco 2015 price guide

February 16, 2015

For information, please contact:

Bushings/Accessories .............. 61

Spec Sheets ......................... 62-69

Parts by Number .................. 70-72Parts by Category ................ 73-76

Terms & Conditions. ................. 77Freight Allowance ..................... 77TechNotes ............................ 78-79

Tubular Plastic ..................... 28-31

Tubular Brass ....................... 32-40

Lavatory .................................... 41

Trim Kits ............................... 42-57Tub Closures ........................ 58-59Faceplate Kits............................60

Schedule 40 ............................ 6-27 Flexible Series ......................... 6 Innovator Cable® Series ......... 8 900 Innovator® Series ............ 14

900 Innovator® Drain Series .. 18 400 Perfect Fit Series ............ 24600 1-Hole Series ................... 25

®

WATCO

Innovator®

Flex Series Pg. 6-8

QuickTrim® Kits Pg. 52

Universal NuFit® Trim Kits Pg. 43-49

WATCO®

Bath Wastes & Trim Kits Price Guide & Product Catalog

Useful. Innovation.TM

Tubular PVC Pg. 28-31

Tubular Brass Pg. 32-40

SCHEDULE 40FLEXIBLE BATH WASTES WatcoFlex® ................................................Direct Drains with Direct Drain Tee............................................. 6 Flex900 Series ..........................................Flex916 / Flex924 with Sanitary Tee ........................................... 7 Flexible Innovator CableFlex® Series ....928 / 938 / 948 CableFlex® ........................................................ 8 Flexible Innovator Drain Series ..............Flex916N & Flex924N ................................................................. 21INNOVATOR CABLE® CableFlex® .................................................928 / 938 / 948 CableFlex® ........................................................ 8 Schedule 40 rigid pipe ..............................970 / 980 / 990 Cable ................................................................. 9 Cable Half Kits ...........................................971 / 981 / 991 Cable .................................................................. 10 Innovator Cable Bath wastes with ADA Handles ....................................................................................... 11SCHEDULE 40 BATH WASTES 900 Series .................................................900 / 902 Innovator® Series ....................................................... 14-15 915 / 917 / 918 Half Kits with Hub or Spigot Adapters ................ 15 920 / 921 / 951 / 961 ABS stopper/knob, zinc or brass bodies ... 16 940 / 941 Innovator® Plus Series ................................................ 17 Innovator Drain Series .............................900N / 901N / Flex916N / Flex924N / Stoppers ......................... 18-23 Perfect Fit Series ......................................400 / 401 Perfect Fit Series ........................................................ 24 600 Series .................................................600 / 601 1-Hole Faceplate Series ............................................. 25 Trip Lever / SLIPLOCK® / TURNSTYLE® .................................... 26 620 / 621 / 651 / 661 ABS stopper/knob, zinc or brass bodies ... 26 610 / 612 / 614 / 615 / 616 / 617 with Hub or Spigot Adapters .... 27

TUBULAR PLASTIC 500 Series .................................................500 / 550 / 2-Hole / SLIPLOCK® Bath Wastes ............................ 29 500 / 550 Trip Lever / QUICK ADJUST® / TURNSTYLE® ........... 30 510 Quarter Kit / 590 / 594 Innovator® ....................................... 31 595 Innovator® & 515 Direct Drains ............................................ 31

TUBULAR BRASS 501 / 502 Series ........................................501 / 551 Series – 502 / 552 Series, 17 & 20-gauge.................. 34-35 Trip-Lever Type ..........................................501 / 502 – 551 / 552 QUICK ADJUST® & Trip Lever ................ 36 501 / 502 – 551 / 552 TURNSTYLE® ........................................ 37 Tub Closures / Direct Drains ....................511 Tub Closures – 512 & 593 Innovator® Direct Drains ............. 37 Innovator Brass Drains............................... 591 / 598 – 592 / 599 Innovator® 17 & 20-gauge ...................... 38-39 Cable / Chicago-Code ...............................528 / 538 Cable, 20g – 567 / 568 Chicago Code, 17g ................ 40

LAVATORY DRAINS 800 / 801 Series – 700 ABS ....................................................... 41

TRIM KITS / TUB CLOSURES / REPLACEMENT STOPPERS Trim Kits ....................................................Universal NuFit® Trim Kits and Tub Closures ............................ 43-49 NuFit® Trim Kits and Tub Closures ............................................ 50-51 QuickTrim® Trim Kits and Tub Closures .................................... 52 528/538 Brass Cable Trim Kits; Innovator Cable Trim Kits ......... 53 Coarse-Thread / Fine-Thread Innovator® & 1-Hole Trim Kits .... 54-55 Trip-Lever Type Trim Kits ............................................................ 56-57 Tub Closures / Replacement Stoppers / Faceplate Kits ............................................................................. 58-60

BUSHINGS / ACCESSORIES Bushings / Test Kits / Measuring Kits / Miscellaneous ............... 61

OTHER INFORMATION Spec Sheets ............................................................Schedule 40: 62-66 / Tubular Plastic: 66-68 / Brass: 68-69 Parts .................................................................................... Listed by Part No.: 70-72 / Listed by Category: 73-76 Carded Packaging (NOTE: Place “-C” at end of part number.) ................................................................. 77 Policies and Miscellaneous Information ...................................................................................................... 77 TechNotes ....................................................................................................................................................... 78-79 Representatives ..................................................................................................................................... Back Cover

QUICK-FIND PRODUCT NUMBER LOCATOR ................. 4-5

Tabl

e of

Con

tent

s u Table of Contents

2 • February 16, 2015, Price List®

WATCO

WATCO... Useful. Innovation.TM

y OPTIONS*** Many options are available and are found throughout the various products.

vSTOPPERS

FOOT ACTUATED

PUSH PULL®

PRESFLO®

LIFT AND TURN

SLIP LOCK®

CABLE

TRIP LEVER

TL QUICK ADJUST®

TURNSTYLE®

CA =

FA =

LT =

PF =

PP =

SL =

TL =

TQ =

TS =

wTUBING / FITTING

MATERIAL

xFINISHES AVAILABLE

AP BB* Aged Pewter Brushed Bronze

BN* BO Brushed Nickel Bone

BS BZ Biscuit Oil-Rubbed Bronze

CB CP Chrome Brushed Chrome Plated

NP* PB* Nickel Polished Polished Brass

PN* WH Pearl Nickel White PRESFLO® ONLY**

WI Wrought Iron

Watco N

umbering System

WATCO Bath Waste Numbering System – Determining Product NumbersExample of Product #:

901 — FA — PVC — CP — *** Series Number Stopper Material Finish

+ ++u

SERIES #Examples:FLEXFLEX916928-CA970-CA971-CA900901902915917921951952900N901N902N401600601621651661610612614615617500550510515595590501591Etc.

ABSAcrylonitrile Butadiene

Styrene(Black)

PVCPolyvinyl Chloride

(White)

FLEXFlexible PVC Pipe

(Green)

BRS17-Gauge & 20-Gauge

Brass Pipe

* PVD Finish

** PN available in limited Items.

February 16, 2015, Price List • 3Phone: 1-800-821-8576 • Fax: 1-800-399-2826 • www.watcomfg.com


WATCO


5500- ................500-SL ...........500-TL ............500-TQ ...........500-TS ...........501- ................501-TQ ...........501-TS ...........502- ................502-TQ ...........502-TS ...........510- ................511- ................511-TL ............512- ................515- ................51612 .............528-CA ...........52800 .............538-CA ...........550- ................550-TL ............550-TQ ...........550-TS ...........551- ................551-TQ ...........551-TS ...........552- ................552-TQ ...........552-TS ...........567 .................568 .................58080 .............58190 .............58220 .............

4400- ................401- ................48100 .............48200 .............48300 .............48301 .............48400 .............48500 .............48600 .............487SA-PP....48700-FA .....48700-PP .......48701-FA.........48701-PP ....4870N-FA......... ...4870N-PP....48750-FA.....48750-PP.....48751-FA..........48751-PP.....4875N-FA.........4875N-PP....

ITEM # PAGE ITEM # PAGE ITEM # PAGE ITEM # PAGE ITEM # PAGE

* If finish other than Chrome is desired, please use this part number and indicate desired finish. ** Plastic Knob, Stopper, and Zinc Body

1. 01040CP 01040___*2. 01006CP 01006___*3. 11495CP

SL, TL, TQ, TS

PUSH PULL® Coarse Thread

1. 01010CP 01010___* 11307CP**2. 115103. 01013CP 01013___* 11290CP**4. 115075. 01016CPS 01016___* 11492CP**

LIFT & TURN Coarse Thread

1. 01010CP 01010___*2. 110793. 110884. 11290CP 01013___*5. 115076. 11492CPS 01016___*

PRESFLO® Coarse Thread1. 11145CP 11145___*2. 111323. 11060CP 11060___*4. 96039: Suction Cup for removing stopper

FOOT ACTUATED Coarse Thread

1. 38412CP 38412___*2. 11492CPS 01016___*

OPTIONAL TUB CLOSURES FOR MOST WATCO COARSE-THREAD BATH WASTES - 1.865”X11.5 TPI

SFor 12 tpi, see pages 54 and 58.

Prod

uct N

umbe

r In

dex Product Index – Find product numbers beginning with...

110121 .............10770 .............10771 .............11111-SET ......11114 ..............11519 .............11547 ....11551 ....11554 ....11565 .............11573 .............11574 .............11575 .............11579 .............11587 .............11594 .............18001 .............18002 .............18003 .............18009 .............18660 .............18661 .............18662 .............18663 .............18702 .............

615656616158

45, 47, 4945, 47, 4945, 47, 49

61616161616161606060605656565660

220200 ............. 57

338080 .............38090 .............38100BUSH ...38101 .............38102 .............38103 .............38104 .............38105 .............38106 .............38107 .............38108 .............38109 .............38110 .............38111 .............38112 .............38113 .............38114 .............38115 .............38116 .............38170 .............38180 .............38190 .............38194 .............38212 .............38219 .............38220 .............38250 .............38260 .............38270 .............38280 .............38290 .............38296 .............38301 .............38305 ............. 38306 .............38307 .............38308 .............38309 .............38312 .............38313 .............

3 Cont.38317 .............38319 .............38321 .............38325 .............38329 .............38333 .............38350 .............38360 .............38370 .............38375 .............38380 .............38385 .............38390 .............38390W ..........38395 .............38410 .............38412 .............38420 .............38433 .............38490 .............38516 .............38520 .............38530 .............38540 .............38610 .............38651 .............38660 .............38661 .............38702 .............38710 .............38770 .............38771 .............38810 .............38812 .............38921 .............39100 .............39290 .............39500 .............39551 .............

55556161616161616161616161616161616161575755555559595454555454545958585959595959

595959595858595858595959545459585855545558585858585856565658575758585857425757

2929303030343637353637313737373155405340293030303436373536374040555559

242451515153515151

45-4748-4944-47

4844-46

4945-4748-4944-47

4844-46

4945-47


9 Cont.941-................948-CA .........948100 ...........948400 ...........948500 ...........948700-FA......948700-PP...948701-FA......948701-PP...94870N-FA......94870N-PP...94870N...951 .................958080 ........... 958190 ...........958290 ...........959290 ...........961 .................968080 ...........968190 ...........968290 ...........969290 ...........970-CA ...........971-CA ...........980-CA ...........981-CA ...........990-CA ...........991-CA ...........

9900- ................900N- .............900NRI- ..........900NSA ..........900NSF-900TK .........901- ................901N- .............901NRI- ..........902- ................91050- ............91100 .............91105 .............915- ................91600 .............91610 .............91615 .............91618 .............91651 .............917- ................918-................920 .................921 .................928-CA ...........928-CASF ....92867 (#23) ....92874............92888 .............92900 .............92999 .............938-CA ......... ..938080 ...........938190 ...........938250 ...........938260 ...........938270 ...........938290 ...........939290 ...........940- ................

ITEM # PAGE ITEM # PAGE ITEM # PAGE ITEM # PAGE ITEM # PAGE

* If finish other than Chrome is desired, please use this part number and indicate desired finish. ** Plastic Knob, Stopper, and Zinc Body

PUSH PULL® Fine Thread

1. 01010CP 01010___* 11307CP2. 115103. 01013CP 01013___* 11290CP**4. 115075. 01022CPS 01022___*

LIFT & TURN Fine Thread

1. 01010CP 01010___*2. 110793. 110884. 11290CP 01013___*5. 115076. 01022CPS 01022___*

PRESFLO® Fine Thread

1. 11155CP 11155___*2. 111313. 11070CP 11070___*4. 96039: Suction Cup for removing stopper

FOOT ACTUATED Fine Thread

1. 38412CP 38412___*2. 01022CPS 01022___*

OPTIONAL TUB CLOSURES FOR MOST WATCO FINE-THREAD BATH WASTES - 1.625”X16 TPI

1. 01040CP 01040___*2. 01006CP 01006___*3. 11490CP

SL, TL, TQ, TS

SFor 14 tpi, see pages 55 and 59.

Product Num

ber IndexProduct Index – Find product numbers beginning with...

58290 .............58296 .............58301............. 58305 .............58306 .............58307 .............58308 .............58309 .............58317 .............58319 .............58321 .............58329 .............58333 .............58350 .............58390 .............58390W ..........58433 .............58490 .............590- ................591- ................592- ................59290 .............593- ................594 .................595- ................598- ................599- ................

Lavatory700- ................800- ................801- ................

A - ZCA W/ADA......FLEX__ ..........FLEX916 ........FLEX916N ......FLEX916NRI ..FLEX924 ........FLEX924N ......FLEX924NRI ..SCH40CD...U39290 ..........U939290 ........W900- ............W901 .............Condensate Adapter........

6600- ................600-SL ...........600-TL ............600-TS ...........601- ................610- ................612- ................614- ................615- ................616- ................617- ................620- ................621- ................650-TL ............650-TS ...........651- ................661- ................68080 .............68190 .............68290 .............68296 .............68301 .............68305 .............68306 .............68307 .............68308 .............68309 .............68317 .............68319 .............68321 .............68329 .............68333 .............68390 .............68390W ..........68433 .............68490 .............69290 .............

545459585859595959595958585954545455313839523731313839

25262626252727272727272626262626265555545459585859595959595958585454545552

178

50505048

44-4748

44-4749

45,4745,47,49

165555545216555554524847

910

910

414141

1167

2121

72121

15, 6152521414

15, 61

14191923

19-21231420201552545415555252525247151616

88-10

638-10

535353

85555545555545217

5 Cont.


WATCO


AP 35.70 BS 22.60 PB 24.75BB 47.10 BZ 26.20 PN 24.95BN 21.95 CB 28.75 WH 22.45BO 22.60 NP 24.80 WI 39.95



Innovator® Flex SeriesFlexibleFlexible Tubing • Built-In Testing & Snap-On Overflow Plate • Coarse Thread: 11.5 tpi

WatcoFlex®

Direct Drain OnlyComplete Bath WastesRough-In KitsStopper/Faceplate KitsPVC and ABS Fittings

Each WatcoFlex® bath waste is custom-fit to each bathtub model.PLEASE PROVIDE THE TUB MANUFACTURER AND MODEL NUMBER WHEN ORDERING.

FLEX___: The length portion (___) of the WatcoFlex® model number will be determined by the tub’s dimensions.Choose either a complete bath waste OR a rough-in kit and stopper/faceplate kit.

900-SERIES SF (Flex___) STOPPER/FACEPLATE

NOT A TRIM KIT - NO STRAINER BODY

COMPLETE BATH WASTESLENGTHS 14.5” TO 17” LONG

RI (ROUGH-IN)FITTINGS - TUBING - STRAINER BODY

LENGTHS 14.5” TO 17” LONG

900-LTSF-0-CP .............900-PPSF-0-CP .............900-PFSF-0-CP .............

PF: NOT in BO-BS-WH

900-FASF-0-CP .............FA: BN-BZ-CB-CP-NP-PB



FLEX___-LT-___-CP .....FLEX___-PP-___-CP ....FLEX___-PF-___-CP ....

PF: NOT in BO-BS-WH

FLEX___-FA-___-CP .....FA: BN-BZ-CB-CP-NP-PB

COMPLETE BATH WASTESLENGTHS 17.5” AND LONGER

FLEX___-LTRI-___-CP ....FLEX___-PPRI-___-CP ....FLEX___-PFRI-___-CP ....

PF: NOT in BO-BS-WH

FLEX___-FARI-___-CP ....FA: BN-BZ-CB-CP-NP-PB


PF: NOT in BO-BS-WH


FLEX___-LT-___-CP .....FLEX___-PP-___-CP ....FLEX___-PF-___-CP ....

PF: NOT in BO-BS-WH

FLEX___-FA-___-CP .....FA: BN-BZ-CB-CP-NP-PB

FLEX___-LTRI-___-CP ....FLEX___-PPRI-___-CP ....FLEX___-PFRI-___-CP ....

PF: NOT in BO-BS-WH

FLEX___-FARI-___-CP ....FA: BN-BZ-CB-CP-NP-PB

Other Finishes:

12 PER CARTON

Install chrome on the rough-in and easily upgrade to a special finish without removing the strainer body! See pages 48-49.• No reduction in flow rate.• Produces very little additional height or inside-diameter reduction.• Uses an o-ring for a tight, snug fit (one for brass strainer bodies and

one for zinc strainer bodies).• Eliminates destroying the integrity of your test and the possibility of

cross-threading or damaging the tub when replacing the strainer body.

Other Finishes: Other Finishes:

Other Finishes: Other Finishes: Other Finishes:

Innovator® QuickTrim KitsSee page 52

82.95127.60

NOTE: PN – PEARL NICKEL AVAILABLE IN PRESFLO® ONLY.

Patented and Patents PendingSee watcomfg.com for details.

Inno

vato

r® F

lex

Seri

es: W

atco

Flex

Dir

ect D

rain


LENGTHS 17.5” AND LONGER

33.9537.5037.00

33.95

24.1525.6526.15

24.15

9.8011.8510.85

9.80



35.3038.8538.35

35.30

25.5027.0027.50

25.50

9.8011.8510.85

9.80


u v w x yExample Product #: FLEX230 — PF — PVC — CP— ***

Series Number Tub Closure Material Finish Option

WITH OPTIONALW-OVERFLOW COVER

Fits Kohler’s Tea-for-Two tub.

FLEXW___-___-CP ........BN-BZ-CB-NP-PB-PN .........

= +

= +

LIFT AND TURN

LT

PUSH PULL®

PP

PRESFLO®

PF

FOOT ACTUATED

FA

•








COMPLETE BATH WASTESWITH TUBING 16” LONG


WITH TUBING 16” LONG

Innovator® Flex SeriesFlexibleFlexible Tubing • Built-In Testing & Snap-On Overflow Plate • Coarse Thread: 11.5 tpi

Flex900 SeriesFlex916 and Flex 924Sanitary Tee and Drain PipeComplete Bath WastesRough-In KitsStopper/Faceplate KitsPVC Fittings only

The Overflow end of the Flex tubing is factory-welded.The Tee end of the Flex tubing is loose, designed to be

cut and fit in the field, using standard PVC-joining techniques.Choose either a complete bath waste OR a rough-in kit and stopper/faceplate kit.

WatcoFlex® / Flex900

LT Trim Kit ....958290-___ PP Trim Kit: ..938290-___ PF Trim Kit: ..938250-___ FA Trim Kit: ...968290-___

Trim Kits LT Tub Closure ..58305-___ PP Tub Closure .38305-___ PF Tub Closure .38360-___ FA Tub Closure ..68305-___

Tub Closures

SEE TRIM KITS, Pg. 54 & TUB CLOSURES, Pg. 58

12 PER CARTON


PF: NOT in BO-BS-WH


900-SERIES SF (Flex924) STOPPER/FACEPLATE


FLEX924-LT-PVC-CP ..FLEX924-PP-PVC-CP ..FLEX924-PF-PVC-CP ..

PF: NOT in BO-BS-WH

FLEX924-FA-PVC-CP ..FA: BN-BZ-CB-CP-NP-PB

COMPLETE BATH WASTESWITH TUBING 24” LONG

FLEX924-LTRI-PVC-CP ..FLEX924-PPRI-PVC-CP ..FLEX924-PFRI-PVC-CP ..

PF: NOT in BO-BS-WH

FLEX924-FARI-PVC-CP ..FA: BN-BZ-CB-CP-NP-PB


PF: NOT in BO-BS-WH


FLEX916-LT-PVC-CP ..FLEX916-PP-PVC-CP ..FLEX916-PF-PVC-CP ..

PF: NOT in BO-BS-WH

FLEX916-FA-PVC-CP ..FA: BN-BZ-CB-CP-NP-PB

FLEX916-LTRI-PVC-CP ..FLEX916-PPRI-PVC-CP ..FLEX916-PFRI-PVC-CP ..

PF: NOT in BO-BS-WH

FLEX916-FARI-PVC-CP ..FA: BN-BZ-CB-CP-NP-PB


•

Other Finishes:

Other Finishes: Other Finishes:Other Finishes:

Innovator® Trim Kits, CTPage 54 Coarse-Thread Tub Closures

Page 58Replacement Stoppers

Page 58

•NOTE: PN – PEARL NICKEL AVAILABLE IN PRESFLO® ONLY.


To order the Flex916 or Flex924

without a Tee or Drain Pipe,add “-13” to part number.

Example:FLEX916-PP-PVC-CP-13

Subtract $6.05 from list priceof product ordered.

*Available only in -CP

Innovator® Flex Series: Flex916 / Flex924


WITH TUBING 24” LONG


35.3037.5037.50

35.30

25.5025.6526.65

25.50


9.8011.8510.85

9.80

9.8011.8510.85

9.80

26.8526.9527.95

26.85

u v w x yExample Product #: FLEX916 — PF — PVC — CP— ***

Series Number Tub Closure Material Finish Option

= +

= +

LIFT AND TURN

LT

PUSH PULL®

PP

PRESFLO®

PF

FOOT ACTUATED

FA

Just bend the flexible tubing to correct misalignment.

36.6538.8038.80

36.65


WATCO


AP 38.70 BS 20.15 NP 34.55BB 51.90 BZ 23.75 PB 34.55BN 21.70 CB 28.40 WH 20.15

Flexible Innovator CableFlex®

Flexible PVC Tubing • OF Elbow Spin-Welded to Tubing • Built-In Testing • Coarse Thread: 11.5 tpi

Innovator CableFlex®

Fully-Testable Cable Bath Waste!• Fullyrepairable from inside the tub.• Overflow installs in minutes.• Self-centering, aligning, and self-sealing overflow.• Positive mechanical stop stays open in deep water.

Schedule 40 Fittings, PVC only

928-CA-PVC-CPTestable Cable

928-CA (21” cable) Fits most tubs up to 16” deep


948-CA (48” cable) Fits most tubs up to 36” deepComplete Bath Wastes

928-CASF-CP ...................928-CARI-PVC-CP ...........

SF - STOPPER/FACEPLATE WITH QUICKTRIM STRAINER BODY COVER


To quickly change the finish of the roughed-in strainer body, order the 928-CASF (above) with the Watco QuickTrim® strainer body cover

and o-ring. Simply snaps over the existing strainer body.

Order below.

SF - STOPPER/FACEPLATE FOR ALL INNOVATOR® CABLE MODELS



FOR MOST TUBS UP TO 16” DEEP

928-CA-PVC-CP ...............

COMPLETE BATH WASTESFOR MOST TUBS UP TO 16” DEEP

938-CA-PVC-CP ...............FOR MOST TUBS UP TO 24” DEEP

948-CA-PVC-CP ...............FOR MOST TUBS UP TO 36” DEEP

938-CARI-PVC-CP ..........FOR MOST TUBS UP TO 24” DEEP

948-CARI-PVC-CP ..........FOR MOST TUBS UP TO 36” DEEP

928-CASF-CPQ .................




Other Finishes:

•

The 928-CASF with the QuickTrim® strainer body cover

and o-ring


To order with the Theft-Resistant Device

Add “-TR” to cable part number.Example: 938-CA-PVC-BZ-TR

NO ADDITIONAL CHARGE.

12 PER CARTON

Inno

vato

r C

able

Flex

®: 9

28 -

938

- 948

Fle

xibl

e Pi

pe

92874-CP ......................

To order the ADA Handle separately, order:

To order bath waste with the ADA Handle

included, see page 11.

98.30 63.85 34.45








18.0553.10

105.80

118.60

71.35

84.15

APQ 224.95 BSQ 75.50 NPQ 141.00BBQ 359.10 BZQ 83.90 PBQ 140.00BNQ 83.65 CBQ 151.65 WHQ 75.50

= +

u v w x yExample of Product #: 928 — CA — PVC — CP — ***

Series # Tub Closure Material Finish Option



Innovator Cable

®: 970 - 980 - 990 Rigid Pipe

Schedule 40 Innovator Cable®

Solvent-Weld Assembly • Built-In Testing • Coarse Thread: 11.5 tpi



990-CA (48” cable) Fits most tubs up to 36” deepComplete Bath Wastes


Innovator Cable®

Fully-Testable Cable Bath Waste!• Fully repairable from inside the tub.• Overflow installs in minutes.• Self-centering, aligning, and self-sealing overflow.• Positive mechanical stop stays open in deep water.

Schedule 40 Fittings, ABS and PVC

928-CASF-CP ...................970-CARI- -CP .........



Order below.





12 PER CARTON

970-CA- -CP ............


980-CA- -CP ............


990-CA- -CP ............FOR MOST TUBS UP TO 36” DEEP

980-CARI- -CP ........


990-CARI- -CP ........FOR MOST TUBS UP TO 36” DEEP

928-CASF-CPQ .................




Other Finishes:


and o-ring

Other Finishes:


•TRIM KITS forInnovator CableFlex®

& Innovator Cable®

92999

92888

•

Regular and QuickTrim cable

trim kits available.For full selection,

see page 53.



•







97.65 63.20 34.45

103.90 69.45

112.80 78.35

53.10


= +

u v w x yExample of Product #: 980 — CA — PVC — CP — ***



WATCO


Schedule 40 Innovator Cable®






Half Kits

Innovator Cable®

Fully-Testable Cable Half Kits!• Fully repairable from inside the tub.• Overflow installs in minutes.• Self-centering, aligning, and self-sealing overflow.• Positive mechanical stop stays open in deep water.

Schedule 40 Fittings, ABS and PVC

928-CASF-CP ...................971-CARI- -CP .........



Order below.





12 PER CARTON

971-CA- -CP ............

INNOVATOR® CABLE HALF KITSFOR MOST TUBS UP TO 16” DEEP

981-CA- -CP ............


991-CA- -CP ............FOR MOST TUBS UP TO 36” DEEP

981-CARI- -CP ........


991-CARI- -CP ........FOR MOST TUBS UP TO 36” DEEP





and o-ring


928-CASF-CPQ .................Other Finishes:

Inno

vato

r C

able

®: 9

71 -

981

- 991

Hal

f Kits



•

To order with the Theft-Resistant Device

Add “-TR” to cable part number.Example: 938-CA-PVC-BZ-TR

NO ADDITIONAL CHARGE.

92874-CP ......................

To order the ADA Handle separately, order:

To order bath waste with the ADA Handle

included, see page 11.

84.85 50.40 34.45

85.90 51.45

52.9587.40









18.05


53.10

= +

u v w x yExample of Product #: 981 — CA — PVC — AP — ***



Innovator Cable

®: 971 - 981 - 991 Half K

its • Cable w

ith AD

A H

andle


928938948 970

980990

971981991

To Order an Innovator Cable® Bath Waste or Half Kit with ADA Handle

Determine bath waste or half kit desired from the previous three pages and find

same part number below with “AD” added to part number.

Order that part number, using the price indicated with that item.

* Indicate ABS or PVC

Innovator Cable® with ADA Handle

928-CA-PVC-CPAD .........928-CA-PVC-APAD ...........928-CA-PVC-BBAD ..........928-CA-PVC-BNAD ..........928-CA-PVC-BSAD ..........928-CA-PVC-BZAD...........928-CA-PVC-CBAD ..........928-CA-PVC-NPAD ..........928-CA-PVC-PBAD ..........928-CA-PVC-WHAD .........928-CASF-CPAD .............928-CASF-APAD...............928-CASF-BBAD ..............928-CASF-BNAD ..............928-CASF-BSAD ..............928-CASF-BZAD ..............928-CASF-CBAD ..............928-CASF-NPAD ..............928-CASF-PBAD ..............928-CASF-WHAD .............938-CA-PVC-CPAD .........938-CA-PVC-APAD ...........938-CA-PVC-BBAD ..........938-CA-PVC-BNAD ..........938-CA-PVC-BSAD ..........938-CA-PVC-BZAD...........938-CA-PVC-CBAD ..........938-CA-PVC-NPAD ..........938-CA-PVC-PBAD ..........938-CA-PVC-WHAD .........948-CA-PVC-CPAD .........948-CA-PVC-APAD ...........948-CA-PVC-BBAD ..........948-CA-PVC-BNAD ..........

948-CA-PVC-BSAD ..........948-CA-PVC-BZAD...........948-CA-PVC-CBAD ..........948-CA-PVC-NPAD ..........948-CA-PVC-PBAD ..........948-CA-PVC-WHAD .........970-CA- * -CPAD .........970-CA- * -APAD ..........970-CA- * -BBAD ..........970-CA- * -BNAD ..........970-CA- * -BSAD ..........970-CA- * -BZAD ..........970-CA- * -CBAD ..........970-CA- * -NPAD ..........970-CA- * -PBAD ..........970-CA- * -WHAD .........971-CA- * -CPAD .........971-CA- * -APAD ..........971-CA- * -BBAD ..........971-CA- * -BNAD ..........971-CA- * -BSAD ..........971-CA- * -BZAD ..........971-CA- * -CBAD ..........971-CA- * -NPAD ..........971-CA- * -PBAD ..........971-CA- * -WHAD .........980-CA- * -CPAD .........980-CA- * -APAD ..........980-CA- * -BBAD ..........980-CA- * -BNAD ..........980-CA- * -BSAD ..........980-CA- * -BZAD ..........980-CA- * -CBAD ..........980-CA- * -NPAD ..........

980-CA- * -PBAD ..........980-CA- * -WHAD .........981-CA- * -CPAD .........981-CA- * -APAD ..........981-CA- * -BBAD ..........981-CA- * -BNAD ..........981-CA- * -BSAD ..........981-CA- * -BZAD ..........981-CA- * -CBAD ..........981-CA- * -NPAD ..........981-CA- * -PBAD ..........981-CA- * -WHAD .........990-CA- * -CPAD .........990-CA- * -APAD ..........990-CA- * -BBAD ..........990-CA- * -BNAD ..........990-CA- * -BSAD ..........990-CA- * -BZAD ..........990-CA- * -CBAD ..........990-CA- * -NPAD ..........990-CA- * -PBAD ..........990-CA- * -WHAD .........991-CA- * -CPAD .........991-CA- * -APAD ..........991-CA- * -BBAD ..........991-CA- * -BNAD ..........991-CA- * -BSAD ..........991-CA- * -BZAD ..........991-CA- * -CBAD ..........991-CA- * -NPAD ..........991-CA- * -PBAD ..........991-CA- * -WHAD .........

131.65326.90452.90167.80158.25174.20242.85231.15231.35158.2556.55

188.40267.1081.8573.7585.90

132.00130.70130.7073.75

140.50335.75461.75176.65167.10183.05251.70239.95240.15167.10155.55350.80476.80191.70

182.15198.10266.75255.00255.20182.15130.90326.15452.15167.05157.50173.45242.10230.40230.60157.50115.85311.10437.05152.00142.45158.40227.05215.35215.55142.45138.25333.50459.50174.40164.85180.80249.45237.70

237.90164.85117.10312.35438.35153.20143.70159.65228.30216.60216.80143.70148.75344.00470.00184.90175.35191.30259.95248.20248.40175.35118.85314.10440.10154.95145.45161.40230.05218.35218.55145.45


WATCO


SCHEDULE 40

FLEXIBLE

Schedule 40: 1.5” PVC & ABS PipeCoarse Thread: 11.5 threads per inch • Schedule 40 TechNotes: page 78

Easily remove membrane after test

Snap-onoverflow plate.

No screws

Built-inmembrane

tests to 22 psi.

901 HALF KIT

#11575 Test Plugincluded with all Innovator® Bath Wastes and Half Kits

Innovator® SeriesWITHOUT TESTING

902-PP-PVC-CPPage 15

Same as the 901, but without the testing

features.

NOTE: Innovator Faceplate Diameter - 3 ⅛″

Installs with one installer.Built-in membrane in overflow elbow and drain elbow. Simply cut out after testing.

HALF KITS

NEW!! Innovator DrainPages 19-23

Innovator® Series900-PP-ABS-CPStarts on page14


Sche

dule

40

Opt

ions

Testable Innovator®


NOTE: 1 Hole & 2 Hole Faceplates Diameter - 3 ⅜″

Schedule 40 Options

3-3/8”

Hub Adapters • Direct Drain Tees • Spigot Adapters

Kits available in 900 and 600 SeriesSee pages 15 and 27.

Install using standard PVC-joining compound • Schedule 40 TechNotes: page 78

3-1/8”

2-5/8”

Condensate AdapterFor Schedule 40

Pages 15 & 61

600-6011-Hole Series 600-PP-PVC-CP

Starts on page 25

600-601TEST KITS

Page 61

Innovator® Plus941-PP-PVC-CP

Combines the Innovator® overflow with the Perfect Fit drain

See page 17

Perfect Fit Patented

adjustable Flanges

400-PP-PVC-CPSee page 24

Patented and Patents PendingSee watcomfg.com for details.Schedule 40


WATCO


Inno

vato

r® 9

00 B

ath

Was

tes

- 901

Hal

f Kits Innovator® 900 SeriesSchedule 40

901 Innovator®

Bath Waste Half KitsABS or PVC

900 Innovator®

Complete Bath WastesFits most tubs up to 16” deepABS or PVC

Built-In Testing • Snap-On Overflow Plate • Solvent Weld Assembly • Coarse Thread: 11.5 tpi

901-PP

#11575 TEST PLUGincluded with all 900/901 Bath Wastes


PF: NOT in BO-BS-WH


900-SERIES SF (901) STOPPER/FACEPLATE


901-LT-____-CP .............901-PP-____-CP ............901-PF-____-CP ............

PF: NOT in BO-BS-WH

901-FA-____-CP ............FA: BN-BZ-CB-CP-NP-PB

901: BATH WASTE HALF KITS

901-LTRI-____-CP .......901-PPRI-____-CP .......901-PFRI-____-CP .......

PF: NOT in BO-BS-WH

901-FARI-____-CP .......FA: BN-BZ-CB-CP-NP-PB


PF: NOT in BO-BS-WH


900-SERIES SF STOPPER/FACEPLATE


901: RI (ROUGH-IN)FITTINGS - STRAINER BODY

900-LT-____-CP .............900-PP-____-CP ............900-PF-____-CP ............

PF: NOT in BO-BS-WH



PF: NOT in BO-BS-WH


598 17G RI (ROUGH-IN) UP TO 24”FITTINGS - TUBING - STRAINER BODY900 RI (ROUGH-IN) UP TO 16”FITTINGS - TUBING - STRAINER BODY

Fits most tubs up to 16” deep: Fits 900’s and 901’s:

WITH OPTIONALOVERFLOW COVER


W900-__-__-CP ...BN-BZ-CB-NP-PB-PN ..

WITH OPTIONALOVERFLOW COVER


W901-__-__-CP ...BN-BZ-CB-NP-PB-PN ...

Choose either a complete bath waste OR a rough-in kit and stopper/faceplate kit. 12 PER CARTON

•

900-PP


Other Finishes:

Innovator® Trim KitsPages 54 & 55 Coarse-Thread Tub Closures

Page 58

Replacement StoppersPages 58

Innovator® QuickTrim® KitsPage 52

• • •NOTE: PN – PEARL NICKEL AVAILABLE IN PRESFLO® ONLY.


30.4536.4034.10

30.45

20.6524.5523.25

20.65

9.8011.8510.85

9.80

21.7027.8025.20

21.70

11.9015.9514.35

11.90

9.8011.8510.85

9.80







82.95127.60

70.20114.80

= +

= +

u v w x yExample Product #: 900 — PF — PVC — CP— ***


LIFT AND TURN

LT

PUSH PULL®

PP

PRESFLO®

PF

FOOT ACTUATED

FA


902 Innovator®

Bath Waste Half Kits - NO TestingComes with overflow and drain elbows, overflow plate assembly, and tub closure; no pipe or tee

ABS or PVC

Innovator® 900 SeriesSchedule 40Same as the 901, but without the testing features.

Innovator® Half Kits with Adapters

918-LT-PVC-CP ............918-PP-PVC-CP ...........918-PF-PVC-CP ...........

PF: NOT in BO-BS-WH

918-FA-PVC-CP ...........FA: BN-BZ-CB-CP-NP-PB

915-LT-____-CP .............915-PP-____-CP ............915-PF-____-CP ............

PF: NOT in BO-BS-WH


917-LT-____-CP .............917-PP-____-CP ............917-PF-____-CP ............

PF: NOT in BO-BS-WH


915 HUB ADAPTER 918 SPIGOT - PVC 917 DRAIN TEE

915 HALF KITS WITHHUB ADAPTER - ABS & PVC

916 HALF KITS WITHSPIGOT ADAPTER - PVC ONLY

917 HALF KITS WITHDIRECT DRAIN TEE - ABS & PVC

Built-In Testing • Snap-On Overflow Plate • Solvent Weld Assembly • Coarse Thread: 11.5 tpi


PF: NOT in BO-BS-WH


900-SERIES SF: STOPPER/FACEPLATENOT A TRIM KIT - NO STRAINER BODY

902-LT-____-CP .............902-PP-____-CP ............902-PF-____-CP ............

PF: NOT in BO-BS-WH


902 HALF KITS WITHOUT TESTING


PF: NOT in BO-BS-WH


902 RI (ROUGH-IN)FITTINGS AND STRAINER BODY

902-PP

3-1/8”2-5/8” 3-3/8”

To include adapter with bath waste, add “-CD” to part number. Add

Example: 900-FA-PVC-BN-CD

To orderCondensate Adapter

separately,see page 61

12 PER CARTON

12 PER CARTON

3.95



Innovator® 902 H

alf Kits - H

alf Kits w

ith Adapters

19.4525.4023.00

19.45

9.6513.5512.15

9.65

9.8011.8510.85

9.80




26.9028.2527.75

26.90

26.9028.2527.75

26.90

26.9028.2527.75

26.90

AP 101.05 CB 70.25BB 135.40 NP 59.40BN 66.90 PB 56.55BO 59.40 PN 70.25BS 59.40 WH 56.55BZ 66.90 WI 101.05



= +

CONDENSATE ADAPTER FOR SCHEDULE 40


WATCO


Inno

vato

r® 9

20 /

961

Bath

Was

tes

- 921

/ 95

1 Ha

lf Ki

ts

Schedule 40 Innovator® 900 Series Built-In Testing • Snap-On Overflow Plate • Solvent Weld Assembly • Coarse Thread: 11.5 tpi

920 CHROME ONLYABS Stopper and KnobBrass Strainer Body

961 CHROME ONLYABS Stopper and Knob

Zinc Strainer Body920-PP961-PPABS or PVC

921 CHROME ONLYABS Stopper and KnobBrass Strainer Body

951 CHROME ONLYABS Stopper and Knob

Zinc Strainer Body921-PP951-PP

ABS or PVC921 / 951 PP HALF KITS

921-PP- -CP ....

951-PP- -CP ....

951-PP1- -CP ..

*PP1= Plastic Pin

920 / 921 / 951 / 961-SF STOPPER/FACEPLATE

921 / 951 RI: ROUGH-INFITTINGS - STRAINER BODY

921-PPRI- -CP ..

951-PPRI- -CP ..

951-PPRI- -CP ..

921-PPSF-0-CP ....

951-PPSF-0-CP ....

900SF-PP1-CP .....

*PP1= Plastic Pin

•

920 / 961 RI: ROUGH-INFITTINGS - STRAINER BODY

920-PPRI- -CP ..

961-PPRI- -CP ..

920 / 921 / 951 / 961-SF STOPPER/FACEPLATE

921-PPSF-0-CP ....

920 / 961 PP BATH WASTES

920-PP- -CP ....

961-PP- -CP ....


Universal NuFit®

Innovator® Trim KitsSee page 52

See pages 43-49.

Quickly and easily change your Innovator® Bath Waste or Half Kit to one of our other fashion finishes.

ABS Stoppers and Knobs

29.2027.55

19.4017.75

9.80

25.7521.7020.50

15.9511.9011.90

9.809.808.60

= +

= +

* *








12 PER CARTON

941 Innovator® PlusHalf KitsABS or PVC - FINE THREAD

940 Innovator® PlusComplete Bath WastesFits most tubs up to 16” deepABS or PVC - FINE THREAD 940-PP

941-LT

Combines the Innovator ® Overflow

with the Perfect Fit DrainFine Thread: 16 tpi

Fine-Thread Trim Kits: Page 55Fine-Thread Tub Closures: Page 59

Innovator® 900 SeriesSchedule 40Snap-On Overflow Plate • Solvent Weld Assembly • Fine Thread: 16 tpi


Equals... the perfect combination!

Plus... Perfect Fit’s...

Innovator®’s...


PF: NOT in BO-BS-WH

900-FASF-0-CP .............FA: BN-BZ-CP-NP-PB

940-941-SERIES SF STOPPER/FACEPLATE


941-LT-____-CP .............941-PP-____-CP ............941-PF-____-CP ............

PF: NOT in BO-BS-WH

941-FA-____-CP ............FA: BN-BZ-CP-NP-PB



PF: NOT in BO-BS-WH

941-FARI-____-CP .......FA: BN-BZ-CP-NP-PB


PF: NOT in BO-BS-WH

900-FASF-0-CP .............FA: BN-BZ-CP-NP-PB

940-941-SERIES SF STOPPER/FACEPLATE


941: RI (ROUGH-IN)FITTINGS - STRAINER BODY

940-LT-____-CP .............940-PP-____-CP ............940-PF-____-CP ............

PF: NOT in BO-BS-WH



PF: NOT in BO-BS-WH

940-FARI-____-CP .......FA: BN-BZ-CP-NP-PB


LIFT AND TURN

LT

PUSH PULL®

PP

PRESFLO®

PF

FOOT ACTUATED

FA


Other Finishes:



Innovator® Plus: 940 Bath W

astes - 941 Half Kits

GASKETS 1.5” PANCAKE 900 ELBOWS 1.5” DRAIN FLANGE

31.9038.1535.70

31.90

22.1026.3024.85

22.10

9.8011.8510.85

9.80

23.1529.4026.95

23.15

13.3517.5516.10

13.35

9.8011.8510.85

9.80

= +

= +


WATCO


Completes the patented Innovator® bath waste system:Quick, one-person installation.Test membranes on overflow and drain elbows (testable to 5 stories/22psi) eliminate test balls or plugs.All corrosion-resistant components.Change finishes quickly with Watco QuickTrim® or Universal NuFit® kits.Easy to snake or clean clogged drains without fear of leaks (does not require removing overflow screws or strainer body).Available in ABS or PVC; Flex Series in PVC only. ABS includes white ABS drain elbow.

Innovator® Overflow Features:Self-centering, self-aligning, self-sealing.No screws to corrode.

Drain Features:Integrated strainer body and drain.Eliminates one solvent-weld joint.No strainer body to install and corrode.Engineered crossbars improve draining over 15%.Push Pull® stoppers.UPC UPC

R

listed.

Patented and Patents Pending: See watcomfg.com for details

Meets Buy American Act & the American Recovery and Reinvestment Act

Inno

vato

r® D

rain

Introducing the...... Innovator® Drain

900N SeriesPVC

900N SeriesABS

901N SeriesPVC

901N SeriesABS

FLEX Series

White ABS Drain Elbow


ITEM PART# DESCRIPTION PRICE1 11307WH Plastic PP Knob - White2 11515 Plastic Pin (11512) & Friction Ring (11504)3 11290WH Plastic Stopper - White4 11507 Stopper Seal 1-1/16 Dia.5 14013 Innovator® Drain Crossbar, removable

6 1400711007

Innovator® Drain Elbow-Long (PVC)Innovator® Drain Elbow-Long (White ABS)

7 10691 Innovator® Drain Elbow Rubber Seal8 10671 Innovator® Drain Elbow Slip Washer9 11480 Innovator® Drain Elbow Retainer Nut

10 1402011020

Innovator® Overflow Elbow - Sch 40 PVCInnovator® Overflow Elbow - Sch 40 ABS

11 10675 Overflow Elbow Gasket - Foam12 11121 Retainer Star Nut for Innovator®

13 01004WH Innovator® Faceplate - plastic - White

14 1401014011

Sanitary Tee - Sch 40 PVCSanitary Tee - Sch 40 ABS

15 SCHPVC-11.75 Schedule 40 PVC Pipe - 1.5” X 11.75”SCHABS-11.75 Schedule 40 ABS Pipe - 1.5” X 11.75”

16 01004CP Innovator® Faceplate - plastic - Chrome Pl.17 11307CP UnNuFit Plastic Knob - Chrome Plated18 11290CP PP Stopper Plastic Chrome Plated19 01053CP QuickTrim® Plastic Strainer Body Cover20 11138 QuickTrim® O-Ring - thick

= +

= +

900N Series - Full Kit

Schedule 40 Innovator® Drain Series Built-In Testing • Snap-On Overflow Plate • Solvent Weld Assembly • Coarse Thread: 11.5 tpi

PVC

900NRI-PVC .................900NRI-PVC-BS .........

900NRI-ABS .................

900NRI (ROUGH-IN) UP TO 16”FITTINGS - BUILT-IN BODY

900NRI-PVC .................900NRI-PVC-BS .........

900NRI-ABS .................

900NRI (ROUGH-IN) UP TO 16”FITTINGS - BUILT-IN BODY

PP1 = Plastic PinPP2 = Brass Pin

12 PER CARTON

Completes the patented Innovator® bath waste system:Quick, one-person installation.Test membranes on overflow and drain elbows (testable to 5 stories/22psi) eliminate test balls or plugs.All corrosion-resistant components.Change finishes quickly with Watco QuickTrim® or Universal NuFit® kits.Easy to snake or clean clogged drains without fear of leaks (does not require removing overflow screws or strainer body).Available in ABS or PVC; Flex Series in PVC only. ABS includes white ABS drain elbow.

Innovator® Overflow Features:Self-centering, self-aligning, self-sealing.No screws to corrode.

Drain Features:Integrated strainer body and drain.Eliminates one solvent-weld joint.No strainer body to install and corrode.Engineered crossbars improve draining over 15%.Push Pull® stoppers.UPC UPC

R

listed.

Meets Buy American Act & the American Recovery and Reinvestment Act

Patented and Patents Pending: See watcomfg.com for details

1220 South Powell RoadIndependence, MO 64057-2724816-796-3900816-796-0875 (Fax)www.watcomfg.com

© 2013 Watco Mfg. Co.Printed in the U.S.A.

Watco Manufacturing Company

Introducing the...Innovator® Drain

4

For information, please contact:

Innovator® Drain - Installation

Rev 10/13 Form No. ndrain.2.03

1. Mark, cut and dry-fit all components prior to welding.2. Apply a single bead of putty around underside of Drain

Elbow flange. DO NOT USE linseed-oil-based putty products.

3. From inside tub, install Drain Elbow through tub drain. Fig 14. Slip on Rubber Seal, Slip Washer and Nut, in that order,

and tighten to tub. Fig 2 5. Solvent weld: Overflow Elbow, Sanitary Tee and schedule

40 pipe or flexible tubing. Fig 36. Install the Foam Washer up to the flange on the Overflow

Elbow and install welded assembly through the tub overflow opening. Fig 4

7. Solvent weld Sanitary Tee to Drain Elbow. Fig 3For the White ABS drain elbow, use standard ABS materials and joining techniques.

8. From inside the tub, install the Retainer Star Nut onto the Overflow Elbow and hand tighten to tub. DO NOT OVER-TIGHTEN. Fig 4

9. Pressure test (if required). After pressure testing, use a knife to cut out the Test Membrane from the Overflow Elbow and Drain Elbow. Fig 5

10. Snap on the Overflow Plate with open slot facing down. Fig 6

11. Unscrew Knob from Stopper. Screw the Push Pull® Pin/Stopper assembly into the threaded Crossbar. Fig 7

12. Thread Knob back onto Stopper. Fig. 8

Overflow Elbow Test MembraneREMOVE AFTER TESTING

Drain Elbow Test MembraneREMOVE AFTER TESTING

Crossbar Ref.

Fig 1

Slip WasherRubber Seal

NutFig 2

Fig 6

Overflow Elbow

Sanitary TeeNot Included With Half Kits

Sch. 40 or Flex TubingNot Included With Half Kits

Fig 3

Tub

Solvent Weld

Solvent Weld

Solvent Weld

Threaded Crossbar

Tighten Pin

Fig 7Knob Fig 8

Foam Washer

Star Nut

Tub

Fig 4

Fig 5

900N Series

PVC

900N Series

ABS


901N Series

PVC

901N Series

ABS

FLEX Series


ABS

900N Innovator® DrainComplete Bath WastesFits most tubs up to 16” deep


900NSF-PP1-WH ..................White knob, stopper, and overflow

900NSF-PP1-BS ....................Biscuit knob, stopper, and overflow

900NSF-PP1-CP-QTP .........With Plastic QuickTrim® body, thick o-ring

900NSF-SERIESSTOPPER/FACEPLATE • PLASTIC PIN




900NSF-SERIESSTOPPER/FACEPLATE • BRASS PIN

900N-PP1-____-WH ...........White knob, stopper, and overflow

900N-PP1-PVC-BS ...........Biscuit knob, stopper, and overflow

900N-PP1-____-CP-QTP ..With Plastic QuickTrim® body, thick o-ring

COMPLETE BATH WASTESPLASTIC PIN




COMPLETE BATH WASTESBRASS PIN

Innovator® D

rain: 900N B

ath Wastes28.20

28.20

31.45

29.85

29.85

33.10

23.5023.5023.50

23.5023.5023.50

4.70

4.70

7.95

6.35

6.35

9.60




6

1

3

2

-WH

5

4

13

11 12

78914

15

10

-CP-QT

1716

18

4

19

20

2

1.201.002.051.151.758.307.600.800.351.954.654.651.701.70

12.155.105.104.155.303.401.252.606.850.45


WATCO


Inno

vato

r® D

rain

: 901

N H

alf K

its Schedule 40 Innovator® Drain Series Built-In Testing • Snap-On Overflow Plate • Solvent Weld Assembly • Coarse Thread: 11.5 tpi

901N Innovator® DrainBath Waste Half Kits




901NRI-PVC .................901NRI-PVC-BS .........

901NRI-ABS .................

901NRI (ROUGH-IN)FITTINGS - BUILT-IN BODY

HALF KITSPLASTIC PIN








901NRI-PVC .................901NRI-PVC-BS .........

901NRI-ABS .................

901NRI (ROUGH-IN)FITTINGS - BUILT-IN BODY

HALF KITSBRASS PIN





12 PER CARTON

901N Series-Half Kit-WH


PVCABS



6 1400711007



10 1402011020



13 01004WH Innovator® Faceplate - plastic - White16 01004CP Innovator® Faceplate - plastic - Chrome Pl.17 11307CP UnNuFit Plastic Knob - Chrome Plated18 11290CP PP Stopper - Plastic - Chrome Plated19 01053CP QuickTrim® Plastic Strainer Body Cover20 11138 QuickTrim® O-Ring - thick

18.90

18.90

22.15

20.55

20.55

23.80

14.2014.2014.20

6.35

6.35

9.60




3

4

978

6

5

1

2

13121110

= +

= +

-CP-QT

1716

18

4

19

20

2

14.2014.2014.20

4.70

4.70

7.95

1.201.002.051.151.758.307.600.800.351.954.654.651.701.70

12.153.401.252.606.850.45



FLEX916N-PP1

Flex916N Innovator® DrainComplete Bath WastesPVC only

FLEX916N-PP1-PVC-WH .......White knob, stopper, and overflow

FLEX916N-PP1-PVC-BS .........Biscuit knob, stopper, and overflow

FLEX916N-PP1-PVC-CP-QTP ..With Plastic QuickTrim® body, thick o-ring

FLEX916N BATH WASTES - TUBS TO 16”PLASTIC PIN

FLEX916NRI-PVC .....FLEX916NRI-PVC-BS

FLEX916NRI ROUGH-INFITTINGS - TUBING - BUILT-IN BODY



FLEX916N-PP2-PVC-WH ........White knob, stopper, and overflow

FLEX916N-PP2-PVC-BS ..........Biscuit knob, stopper, and overflow

FLEX916N-PP2-PVC-CP-QTP ...With Plastic QuickTrim® body, thick o-ring

FLEX916N BATH WASTES - TUBS TO 16”BRASS PIN






FLEX924N BATH WASTES - TUBS TO 24”PLASTIC PIN






FLEX924N BATH WASTES - TUBS TO 24”BRASS PIN



Flex924N Innovator® DrainComplete Bath Wastes – PVC only


12 PER CARTON


To order the Flex916N or Flex924Nwithout a Sanitary Tee,

add “-NTEE” to part number.Example:

FLEX916N-PP-PVC-WH-NTEESubtract $4.85 from list price of product ordered.







Fits most tubs up to 24” deep900NSF-SERIES

STOPPER/FACEPLATE • PLASTIC PIN


12 PER CARTON







Fits most tubs up to 16” deep

Innovator® D

rain: Flex916N &

Flex924 Flexiable

32.45

32.45

35.70

34.10

34.10

37.35

37.60

37.60

40.85

39.25

39.25

42.50

27.75

27.75

27.7527.75

32.9032.90

32.9032.90

4.70

4.70

7.95

6.35

6.35

9.60

4.70

4.70

7.95

6.35

6.35

9.60



= +

= +

= +

= +


WATCO


Inno

vato

r® D

rain

Spe

cs Schedule 40 Innovator® Drain Series Built-In Testing • Snap-On Overflow Plate • Solvent Weld Assembly • Coarse Thread: 11.5 tpi

Innovator® DrainRough-In Kits

Innovator® DrainReplacement Stoppers

on next page.



6 1400711007



10 1402011020



13 01004WH Innovator® Faceplate - plastic - White

14 1401014011

Sanitary Tee - Sch 40 PVCSanitary Tee - Sch 40 ABS

15

Not Sold Separately

Flex916 Flexible Tubing 1.5” x 16”Flex924 Flexible Tubing 1.5” x 24”

SCHPVC-11.75 Schedule 40 PVC Pipe - 1.5” X 11.75”SCHABS-11.75 Schedule 40 ABS Pipe - 1.5” X 11.75”

16 01004CP Innovator® Faceplate - plastic - Chrome Pl.17 11307CP UnNuFit Plastic Knob - Chrome Plated18 11290CP PP Stopper - Plastic - Chrome Plated19 01053CP QuickTrim® Plastic Strainer Body Cover20 11138 QuickTrim® O-Ring - thick

1.201.002.051.151.758.307.600.800.351.954.654.651.701.70

12.155.105.10

4.155.303.401.252.606.850.45

FLEX916N Series-Full KitFLEX924N Series-Full Kit

Includes Flexible Pipe-WH

-CP-QT

14

121110

15

9

6

13

5

3

2

1

4

8 7

1716

18

4

19

20

2

Finish Trim900NSF-PP1-WH 900NSF-PP1-CP-QT

3

2

1

4

13

19

16

Rough-In-Full Kit (Does Not Include Finish Trim)

FLEX916NRI-PVC ● FLEX924NRI-PVC900NRI-PVC ● 900NRI-ABS

914

121110

8

5

15 Rigid Pipe or Flexible

7

6

Rough-In-Half Kit (Does Not Include Finish Trim)901NRI-PVC ● 901NRI-ABS

910

678

5

1211

20

18

2

17

4



•

Innovator® DrainReplacement Stopper AssembliesPlastic Knob and StopperPlastic or Brass Pins

900NSA-PP1-WH ....900NSA-PP1-BS .....900NSA-PP1-CP .....

REPLACEMENT STOPPERSPLASTIC PIN

20 PER CARTON


ITEM PART# DESCRIPTION PRICE1 11307WH Plastic PP Knob - White2 11515 Plastic Pin (11512) & Friction Ring (11504)3 11290WH Plastic Stopper - White4 11507 Stopper Seal 1-1/16 Dia.

17 11307CP UnNuFit Plastic Knob - Chrome Plated18 11290CP PP Stopper - Plastic - Chrome Plated

1.001.001.801.151.152.60

900NSA-PP2-WH ....900NSA-PP2-BS .....900NSA-PP2-CP .....

REPLACEMENT STOPPERSBRASS PIN

Plastic QuickTrim® Kits in Chrome-CP, White-WH or Biscuit-BS.

For all Watco® Strainers and Innovator® Drains.

*All Plastic Components Comes With Plastic Strainer Body Cover

Innovator® D

rain Replacem

ent Stoppers

Stopper Assembly w/plastic pin

900NSA-PP1-WH 900NSA-PP1-CP

3 18

2 2

1 17

4 4

5.755.755.75

7.957.957.95

900TK-PP1-QTP-CP ........

900TK-PP1-QTP-WH ......

900TK-PP1-QTP-BS .......

PLASTIC QUICKTRIM® KITS

18.3518.3518.35


WATCO


AP 110.75 BS 69.10 PB 67.15BB 145.15 BZ 68.55 WH 65.80BN 68.55 CB 80.00 WI 110.75BO 65.80 NP 69.10

AP 102.40 BS 60.75 PB 59.05BB 136.80 BZ 61.40 WH 57.85BN 61.40 CB 71.65 WI 102.40BO 57.85 NP 60.75

Adjustable Flange • Solvent Weld Assembly • Fine Thread 16 tpi • Schedule 40 TechNotes: page 78

12 PER CARTON

Perfect Fit 400 SeriesSchedule 40

THE SECRET TO PERFECT FIT’S PERFECT FIT...

GASKETS 1.5” PANCAKE 900 ELBOWS 1.5” DRAIN FLANGE1.5” OVERFLOW FLANGE

Standard Layout

Above-Floor Layout

Direct-Drain Layout

401 Perfect FitBath Waste Half KitsABS or PVC

400 Perfect FitComplete Bath WastesFits most tubs up to 16” deepABS or PVC

400-LT 401-PP

400-401

LT Trim Kit ..... 58080-___ PP Trim Kit: ... 38080-___ PF Trim Kit: ... 38260-___ FA Trim Kit: .... 68080-___

Trim Kits LT Tub Closure ....58301-___ PP Tub Closure ...38301-___ PF Tub Closure ...38380-___ FA Tub Closure ....68301-___

Tub Closures

FINE THREAD - 16 tpi

14.0"(356 mm)

1.5"(38 mm)

7.75"(197 mm)

400 Rough-In Measurements

401-LT-____-CP .............401-PP-____-CP ............401-PF-____-CP ............

PF: NOT in BO-BS-WH



400-LT-____-CP .............400-PP-____-CP ............400-PF-____-CP ............

PF: NOT in BO-BS-WH


400: COMPLETE BATH WASTES

Fits most tubs up to 16” deep:

FINE THREAD - 16 tpi

940-941

LT Trim Kit .... 958080-___ PP Trim Kit: .. 938080-___ PF Trim Kit: .. 938260-___ FA Trim Kit: ... 968080-___


Tub Closures

FINE-THREAD TRIM KITS: PG 55; TUB CLOSURES: 59

Patented Adjustable FlangeThis patented, adjustable feature allows a tight-fitting overflow flange on a wide range of tub angles. The only tool needed is a HAND! It TURNS, not pivots.

12 PER CARTON


Perf

ect F

it: 4

00 B

ath

Was

tes

- 401

Hal

f Kits

33.3037.9037.90

33.30

24.9029.6029.60

24.90

u v w x yExample Product #: 400 — FA — PVC — CP — ***

Series Number Stopper Material Finish Option

LIFT AND TURN

LT

PUSH PULL®

PP

PRESFLO®

PF

FOOT ACTUATED

FA


Solvent Weld Assembly • PVC or ABS • Coarse Thread 11.5 tpi • 1-Hole Faceplate (2-Hole available)600 SeriesSchedule 40

600Complete Bath WastesFits most tubs up to 16” deepABS or PVC

601Bath Waste Half Kits

600-PP 600-SFSF Kits have No

strainerbody.

14.0"(356 mm)

1.5"(38 mm)

7.75"(197 mm)

900-940-600Rough-In Measurements

600-601


Trim Kits

LT Tub Closure ....58305-___ PP Tub Closure ...38305-___ PF Tub Closure ...38360-___ FA Tub Closure ....68305-___

Tub Closures

TC KITS: pg 58

CT TRIM KITS: pg 54

601-LT-____-CP .............601-PP-____-CP ............601-PF-____-CP ............

PF: NOT in AB-BO-BS-WH



600-LT-____-CP .............600-PP-____-CP ............600-PF-____-CP ............





12 PER CARTON

601-LT

600-601TEST KITSSee page 61.


1-Hole Faceplate Series: 600 B

ath Wastes &

601 Half K

its

30.4536.4034.10

30.45

21.7027.8025.20

21.70

AB 74.65 BS 67.55 PB 64.30AP 114.50 BZ 66.90 PN 78.40BB 139.40 CB 78.40 WH 66.25BN 66.90 NP 67.55 WI 109.15BO 67.55

AB 66.70 BS 59.20 PB 56.35AP 100.80 BZ 58.70 PN 70.05BB 135.20 CB 70.05 WH 58.05BN 58.70 NP 59.20 WI 100.80BO 59.20

u v w x yExample Product #: 600 — PF — PVC — BN — ***


NOTE: PN – PEARL NICKEL AVAILABLE IN PRESFLO® COARSE-THREAD ONLY.

LIFT AND TURN

LT

PUSH PULL®

PP

PRESFLO®

PF

FOOT ACTUATED

FA


WATCO


BN 77.80 BZ 77.80 PB 70.00BO 70.00 CB 81.70 WH 70.00BS 70.00 NP 70.00 WI 123.55





Schedule 40 600 SeriesSolvent Weld Assembly • PVC or ABS • Coarse Thread: 11.5 tpi • Schedule 40 TechNotes: page 78

600-SL

Patented

600-SLSLIP LOCK® Trip Lever

600-TL / 650-TLTRIP LEVER

600-TL650-TL12 PER CARTON

Patented

600-TS / 650-TSTURNSTYLE®

600-TS650-TS

10 PER CARTON

Patented

ABS or PVC

600-TL- _ -CP ........Fits most tubs 16” deep:

600-SL- _ -CP ........Fits most tubs 16” deep:

ABS or PVC

650-TL- _ -CP ........Fits most tubs 24” deep:

600-TS- _ -CP .......Fits most tubs 16” deep:

Trim Kits for SLIP LOCK®, Trip Lever, and TURNSTYLE® : See pages 56-57 – Faceplate Kits: See page 60.

650-TS- _ -CP .......Fits most tubs 24” deep:

ABS or PVC12 PER CARTON

10 PER CARTON

Make sure brass linkage is not kinked.

CORRECT

INCORRECT

Notice: All Trip-Lever-Type Drains

620 Bath Wastes Fits most tubs up to 16” deep

621 Half KitsABS Stopper and Knob; Brass Strainer Body

661 Bath Wastes Fits most tubs up to 16” deep

651 Half KitsABS Stopper and Knob; Zinc Strainer Body

620-PP661-PP

621-PP651-PP

For trip-lever type trim and linkage kits, & faceplate kits, see pages 56-57 and 60.

12 PER CARTON

12 PER CARTON 12 PER CARTON

NOT


600

Seri

es: S

lip L

ock®

- Tr

ip L

ever

- Tu

rnst

yle®

- 62

0 / 6

21 &

651

/ 66

1

41.25

33.20

46.85

620-PP- -CP ...

621-PP- -CP ...

620 / 661 BRASS BODY COMPLETE BATH WASTES

Bath Waste......Half Kit.............

29.0023.60

661-PP- -CP ...

651-PP- -CP ...

661 / 651 ZINC BODY BATH WASTE & HALF KIT

Bath Waste......Half Kit.............

70.50

86.15

27.3021.95


600 Series (Cont.)Schedule 40

12 PER CARTON600-Series Quarter Kits with Adapters




610-LT-____-CP .............610-PP-____-CP ............610-PF-____-CP ............



614-LT-____-CP .............614-PP-____-CP ............614-PF-____-CP ............



610 HUB ADAPTER 612 SPIGOT - PVC 614 DRAIN ELBOW

610 QUARTER KITS WITHHUB ADAPTER - ABS & PVC

612 QUARTER KITS WITHSPIGOT ADAPTOR - PVC ONLY

614 QUARTER KITS WITHDRAIN ELBOW - ABS & PVC

12 PER CARTON600-Series Half Kits with Adapters




615-LT-____-CP .............615-PP-____-CP ............615-PF-____-CP ............



617-LT-____-CP .............617-PP-____-CP ............617-PF-____-CP ............



615 HUB ADAPTER 616 SPIGOT - PVC 617 DIRECT DRAIN TEE

615 HALF KITS WITHHUB ADAPTER - ABS & PVC

616 HALF KITS WITHSPIGOT ADAPTOR - PVC ONLY

617 HALF KITS WITHDIRECT DRAIN TEE - ABS & PVC

Solvent Weld Assembly • PVC or ABS • Coarse Thread: 11.5 tpi • Schedule 40 TechNotes: page 78

3-1/8”

2-5/8” 3-3/8”

2-5/8” 3-3/8”

For Drain Elbow Half Kit, see Model 601 on page 25.

Hub Adapters fit outside 1-1/2” Schedule 40 ABS orPVC piping.

Spigot Adapters fit inside 1-1/2” Schedule 40 PVC piping.



600 Series: Adapters - Spigots - D

irect Drain Tees - Q

uarter & H

alf Kits

18.9519.9018.95

18.95

26.9028.2527.75

26.90

18.9519.9018.95

18.95

26.9028.2527.75

26.90

18.9519.9018.95

18.95

26.9028.2527.75

26.90







u v w x yExample Product #: 610 — LT — PVC — AB — ***



WATCO


Tubular Plastic: 1.5” PVC & ABS Pipe1.5” Pipe • Slip-Joint Assembly • PVC or ABS • 11.5 tpi • Tubular Plastic TechNotes: page 78

#11114 TEST CAP & #11575 TEST PLUGincluded with all 590 & 595 Bath Wastes.

Innovator® Series590-PP-PVC-CPPage 31

Quarter Kit with Coarse-Thread DE

Page 31

Innovator® Series595-PP

Direct DrainPage 31

Tubular Plastic Series500-PP

Page 29

TURNSTYLE®500-TS-PVC-CPPage 30

Quick Adjust®

Trip Lever500-TQ

Page 30


Tubu

lar

Plas

tic O

ptio

ns





Tubular Plastic 500 Series

500Complete Bath WastesABS or PVC

Slip-Joint Assembly • 11.5 tpi • Tubular Plastic TechNotes: page 78

500-PP

500-LT-____-CP .............500-PP-____-CP ............500-PF-____-CP ............



Fits most tubs up to 16” deep:550-LT-____-CP .............550-PP-____-CP ............550-PF-____-CP ............





550Complete Bath WastesABS or PVC

ROUGHING-IN DIMENSIONS

4.75” min (121 mm)7.5” max (191 mm)

1.5”

10.0

” min

(254

mm

)

14.5

” max

(369

mm

)

Model 500’sAll closure types.


6.0” min (152 mm)(356 mm)

1.5”

12.0

” min

(305

mm

)

23.5

” max

(597

mm

)

14.0” max

ROUGHING-IN DIMENSIONS


500-SLComplete Bath Wastes

SLIP LOCK® Trip Lever

500-SL- _ -CP ........Fits most tubs up to 16” deep:

12 PER CARTONABS or PVC

TRIM KITS: Pgs. 54 – TUB CLOSURES: Pgs. 58

500-550

LT Trim Kit .......58290-___-2H PP Trim Kit: .....38290-___-2H PF Trim Kit: .....38250-___-2H FA Trim Kit: ......68290-___-2H

Trim Kits LT Tub Closure ......58305-___ PP Tub Closure .....38305-___ PF Tub Closure .....38360-___ FA Tub Closure ......68305-___

Tub Closures


Make sure brass linkage is not kinked.

CORRECT

INCORRECT

Notice: All Trip-Lever-Type Drains

Trim Kits for SLIP LOCK® on pages 56-57

Faceplate Kits:See page 60

500 Series: 500 / 550 Bath W

astes - 500 Slip Lock® Trip Lever

26.2531.2031.20

26.25

31.20

39.7544.9544.95

39.00

LIFT AND TURN

LT

PUSH PULL®

PP

PRESFLO®

PF

FOOT ACTUATED

FA


WATCO








500-TL / 550-TLComplete Bath Wastes

TRIP LEVER

12 PER CARTON

10 PER CARTON

500-TL- _ -CP ........

550-TL- _ -CP ........Fits most tubs up to 24” deep:

500-TS / 550-TSComplete Bath Wastes

TURNSTYLE®

12 PER CARTON

10 PER CARTON

500-TS- _ -CP .......Fits most tubs up to 16” deep:

550-TS- _ -CP .......Fits most tubs up to 24” deep:

ABS or PVCABS or PVC


Slip-Joint Assembly • PVC or ABS • Coarse Thread: 11.5 tpi • Tubular Plastic TechNotes: page 78500 SeriesTubular Plastic

500-TQ / 550-TQComplete Bath Wastes

QUICK ADJUST® Trip Lever

500-TQ- _ -CP .......Fits most tubs up to 16” deep:

12 PER CARTON

ABS or PVC

NOT


10 PER CARTON

550-TQ- _ -CP .......Fits most tubs up to 24” deep:


500

Seri

es: Q

uick

Adj

ust®

Tri

p Le

ver

- Tri

p Le

ver

- Tur

nsty

le®

27.80

41.55

27.80

41.55

62.15

75.25

Installation:A Establish rough-in

length at overflow elbow scale.

B Adjust threaded-rod end on the linkage clevis until the number matches the number on the overflow elbow scale.

NOTE:Typical installation for:Model 500-TQ (ABS or PVC)


Slip-Joint Assembly • PVC or ABS • Coarse Thread: 11.5 tpi • Tubular Plastic TechNotes: page 78

515Polypropylene2-Hole Direct Drain

500 SeriesTubular Plastic

510-LT- -CP .......510-PP- -CP ......510-PF- -CP ......

(PF NOT in AB-BO-BS-WH)

510-FA- -CP .......(FA: BN-BZ-CB-CP-NP-PB)

12 PER CARTON

590-PP*PP1 = Plastic Pin


PF: NOT in BO-BS-WH

595-FA-PVC-CP ...........(FA: BN-BZ-CB-CP-NP-PB)

515-LT-CP...............................515-PP-CP ..............................515-PF-CP ..............................


515-FA-CP ..............................(FA: BN-BZ-CB-CP-NP-PB)

Fits most tubs up to 16” deep

515-LTPRESFLO®

FOOT ACTUATED

510Quarter Kit withCoarse-ThreadDrain Elbow

12 PER CARTON

900SF-PP1-CP ............... 900-LTSF-0-CP ..............900-PPSF-0-CP ..............900-PFSF-0-CP ..............PF: NOT in BO-BS-WH


900-SERIES SF (Fits 590s) STOPPER/FACEPLATE


590-PP1- -CP ......590-LT- -CP ...........590-PP- -CP ..........590-PF- -CP ..........

PF: NOT in BO-BS-WH

590-FA- -CP ...........FA: BN-BZ-CB-CP-NP-PB


590-LTRI- -CP ......590-LTRI- -CP ......590-PPRI- -CP ......590-PFRI- -CP ......

PF: NOT in BO-BS-WH

590-FARI- -CP ......FA: BN-BZ-CB-CP-NP-PB


Fits most tubs up to 16” deep: Fits most tubs up to 16” deep: Fits all 590’s and 595’s:

#11114 TEST CAP & #11575 TEST PLUG

included with all 590 & 594 Bath Wastes.

590-594-595



Tub Closures

TRIM KITS: Pgs. 54 – TUB CLOSURES: Pgs. 58

590Innovator® Complete Bath WastesABS or PVC

595Innovator® Tubular PVC & PolypropyleneDirect DrainOverflow Elbow: Tubular Plastic PVCElbow & Drain Tee: Polypropylene

510-LT595-PP

12 PER CARTON

= +

12 PER CARTON

594-LT- -CP ...........594-PP- -CP ..........594-PF- -CP ..........

PF: NOT in BO-BS-WH

594-FA- -CP ...........FA: BN-BZ-CB-CP-NP-PB

594Same as the 590 but for most tubs up to 24” deep.

ABS or PVC

OTHER FINISHES AVAILABLE: 10 PER CARTON



500 Series: 510 Kit - 515 / 595 D

irect Drains – 590 / 594 Innovator

®

To order the 590-595-595 without the Test Cap and Plug,add “-LTK” to end of part number.

Subtract $3.70 from list price of product ordered.

21.8022.9021.80

21.80

29.2030.4031.2031.20

30.40

44.3045.0545.05

44.30

29.6532.1531.15

29.65

20.6020.6019.3520.35

20.60

29.6532.1531.15

29.65

8.609.80

11.8510.85

9.80








**


WATCO


Options for Tubular Brass1.5” Pipe • Coarse Thread: 11.5 tpi • 17-Gauge Pipe and 20-Gauge Pipe available

New York Tee (-NY) Use Watco’s New York Tee as a through-the-floor installation without sacrificing adjustability. For New York Tee, add “-NY” to product number.

Slip ’N Solder® (-U)• solder two tubes (like copper fittings).• eliminate an access panel.• eliminate need for exact lengths.

For Slip “N Solder® unit, add “-U” to product number.

6.5"

min

(165

mm

)14

" max

(356

mm

)

4.75" min(121mm)9.5" max (241mm)

1.5” (38mm)

Slip ‘N Solder®501-U/502-U

Rough-In Dimensions

6.5"

min

(165

mm

)22

.5" m

ax (5

71m

m)

1.5"(38mm)

4.75" min(121mm)14.375" max (365mm)


Rough-In Dimensions

Multiple options with only one tee.

11.7

5" m

in (2

98m

m)

14" m

ax (3

56m

m)

6.75" min(171mm)9.25" max (235mm)

1.5” (38mm)

“New York”501-NY/502-NY

Rough-In Dimensions

20.2

5" m

in (5

14m

m)

22.5

" max

(572

mm

)

11.625" min(295mm)14.125" max (359mm)

1.5” (38mm)


Rough-In Dimensions

••

NOTE: These two options cannot be used together on the same bath waste.


Tubu

lar

Bra

ss O

ptio

ns


BrassCondensate

OverflowElbow

See TechNoteson page 79.

Through-Wall Chicago CodeSee Page 40.

Brass CableSee Page 40.

For Brass TechNotes and extensions, see page 79.More on Tubular Brass

Innovator® Trim KitsPage 54

Coarse-Thread Tub Closures

Pages 58

ReplacementStoppersPage 58

Innovator® QuickTrim® Kits

Page 52

• • •

Trim Kits & Tub Closures for our brass drains...

•


Tubular Brass O

ptions


WATCO


Tubular Brass 501/551 Series17-Gauge Pipe • Coarse Thread: 11.5 tpi • For Brass TechNotes and extensions: page 79

551 17-GaugeFits Most Tubs up to 24” Deep


551-LT-BRS-CP ...........551-PP-BRS-CP ...........551-PF-BRS-CP ...........


551-FA-BRS-CP ...........FA: BN-BZ-CB-CP-NP-PB

551 17G: MOST TUBS UP TO 24” DEEPCOMPLETE BATH WASTES





Fits most tubs up to 16” deep: Fits most tubs up to 24” deep:

501s:12 PER CARTON

551s:10 PER CARTON

501-551-502-552

LT Trim Kit .....58290-__-2H PP Trim Kit: ...38290-__-2H PF Trim Kit: ...38250-__-2H FA Trim Kit: ....68290-__-2H


Tub Closures

TRIM KITS: Pg. 54 TUB CLOSURES: Pg. 58

11.7

5" m

in (2

98m

m)

14" m

ax (3

56m

m)

6.75" min (171mm)7.5" max (190mm)

1.5" (38mm)

501-502Rough-In Dimensions

501-PP


Slip ’N Solder®

To order, add “U” to item number.


New York TeeTo order, add “NY” to item number.

OR

Brass Assembly Additional OptionsNo additional charge.

17-G

auge

Bra

ss: 5

01 /

551

Seri

es



92.6096.3594.50

92.60

113.40118.15115.90

113.40

u v w x yExample Product #: 501 — PF — BRS — BZ — ***



LIFT AND TURN

LT

PUSH PULL®

PP

PRESFLO®

PF

FOOT ACTUATED

FA





20.2

5" m

in (5

14m

m)

22.5

" max

(572

mm

)

11.625" min (295mm)12.375" max (314mm)

1.5" (38mm)

502/552 Series20-Gauge Brass Pipe • Coarse Thread: 11.5 tpi • For Brass TechNotes and extensions: page 79Tubular Brass










502s:12 PER CARTON

552s:10 PER CARTON

502-PP



QuickTrim® KitsPage 52

Coarse-Thread Tub ClosuresPage 58

Replacement StoppersPage 58

• •

•

•


Slip ’N Solder®




OR


20-Gauge B

rass: 502 / 552 Series

86.0089.3587.65

86.00

u v w x yExample Product #: 501 — PF — BRS — BZ — ***



LIFT AND TURN

LT

PUSH PULL®

PP

PRESFLO®

PF

FOOT ACTUATED

FA

106.70111.15109.05

106.70


WATCO






Trip Lever Models17-G & 20-G Brass Pipe • Coarse Thread: 11.5 tpi • For Brass TechNotes and extensions: page 79Tubular Brass

501-TQ 17-Gauge

502-TQ 20-Gauge

Fits Most Tubs up to 16” Deep

QUICK ADJUST® QUICK ADJUST®

12 PER CARTON

501-TQ-BRS-CP .......

Trip Lever Bath Wastes require through-the-floor installation.Trim Kits for SLIP LOCK®, Trip Lever, and TURNSTYLE® : See pages 56-57 – Faceplate Kits: See page 60.


551-TQ 17-Gauge

552-TQ 20-Gauge

Fits Most Tubs up to 24” Deep501-TQ-BRS-CP .......

502-TQ-BRS-CP .......

551-TQ-BRS-CP .......

552-TQ-BRS-CP .......

10 PER CARTON

17- &

20-

Gau

ge: 5

01 /

551

- 502

/ 55

2 Q

uick

Adj

ust®

- Tr

ip L

ever

97.55

91.15

Installation:A Establish rough-in

length at overflow elbow scale.


NOTE:Typical installation for:Model 500-TQ (ABS or PVC)Model 501-TQ (17ga Brass)Model 502-TQ (20ga Brass)

u v w x yExample Product #: 552 — TQ — BRS — BO — ***


119.65

113.25









TURNSTYLE® TURNSTYLE®

TURNSTYLE® - Direct DrainTubular Brass

512-LT-BRS-CP ..................512-PP-BRS-CP ..................512-PF-BRS-CP ..................

(PF NOT in AB-BO-BS-WH)=

512-FA-BRS-CP ..................(FA: BN-BZ-CB-CP-NP-PB)



511-FA-BRS -CP ...................(FA: BN-BZ-CB-CP-NP-PB)


(PF NOT in BO-BS-WH)

593-FA-BRS-CP ..................(FA: BN-BZ-CB-CP-NP-PB)

511 17-Gauge

Tub Closure with 18.125” Extension

593 17-Gauge

Innovator® Direct Drain Fits Most Tubs up to 16” Deep

17-G & 20-G Brass Pipe • Coarse Thread: 11.5 tpi • For Brass TechNotes and extensions: page 79

12 PER CARTON

12 PER CARTON

#11114 TEST CAP & #11575 TEST PLUGincluded in all 593 Bath Wastes.

12 PER CARTON

501-TS 17-Gauge

502-TS 20-Gauge


501-TS-BRS-CP ........

502-TS-BRS-CP ........

551-TS 17-Gauge

552-TS 20-Gauge


551-TS-BRS-CP ........

552-TS-BRS-CP ........

551s/552s10 PER CARTON

501s/502s12 PER CARTON

593 Trim Kits same as 591’sTRIM KITS: Pg. 54 – TUB CLOSURES: Pg. 58

512 Trim Kits same as 501’sTRIM KITS: Pg. 54 – TUB CLOSURES: Pg. 58

512 17-Gauge

2-Hole Direct DrainFits Most Tubs up to 16” Deep

511-TL 17-Gauge

The 511 above but with Trip Lever Dome Cover Strainer Plate and Strainer Cover Plate Screw instead of a stopper assembly. Available in Chrome Plated Finish Only

NOT NOT

NOT

NOTE BELOW: PN – PEARL NICKEL AVAILABLE IN PRESFLO® COARSE-THREAD ONLY.



17- & 20-G

auge: 501 / 551 - 502 / 552 Turnstyle® - D

irect Drains - 511 / 511-TL

137.35

131.40

156.10

150.05

58.0061.2059.25

58.00

92.6096.3595.45

92.60

92.6096.3595.45

92.60

u v w x yExample Product #: 552 — LT — BRS — BO — ***


58.00


WATCO



11.7

5" m

in (2

98m

m)

14" m

ax (3

56m

m)

6.75" min (171mm)7.5" max (190mm)

1.5" (38mm)


Tubular Brass 17g Brass Innovator®17-Gauge Brass Pipe • Coarse Thread: 11.5 tpi • For Brass TechNotes and extensions: page 79

598 Fits Most Tubs up to 24” Deep


PF: NOT in BO-BS-WH




PF: NOT in BO-BS-WH




591s:12 PER CARTON

598s:10 PER CARTON

591-592-598-599



Tub Closures

TRIM KITS: Pg. 54 – TUB CLOSURES: Pg. 58

591-PP

17g Brass Innovator®



Slip ’N Solder®




OR


17-G

auge

Inno

vato

r®: 5

91 /

598


To order without the Test Cap and Plug,add “-LTK” to end of part number.

Subtract $3.70 from list price.

92.6096.3594.50

92.60

113.40118.15115.90

113.40


u v w x yExample Product #: 591 — PP — BRS — BN — ***



LIFT AND TURN

LT

PUSH PULL®

PP

PRESFLO®

PF

FOOT ACTUATED

FA


20.2

5" m

in (5

14m

m)

22.5

" max

(572

mm

)

11.625" min (295mm)12.375" max (314mm)

1.5" (38mm)

Tubular Brass 20g Brass Innovator®20-Gauge Brass Pipe • Coarse Thread: 11.5 tpi • For Brass TechNotes and extensions: page 79


PF: NOT in BO-BS-WH




PF: NOT in BO-BS-WH




592s:12 PER CARTON

599s:10 PER CARTON599 Fits Most Tubs

up to 24” Deep

20g Brass Innovator®



592-PP


Slip ’N Solder®




OR


20-Gauge Innovator

®: 592 / 599

86.0089.3587.65

86.00

106.70111.15109.05

106.70



u v w x yExample Product #: 592 — LTRI — BRS — CP — ***



Innovator® QuickTrim® KitsPage 52

Coarse-Thread Tub ClosuresPage 58

Replacement StoppersPage 58

• •

•

•


LIFT AND TURN

LT

PUSH PULL®

PP

PRESFLO®

PF

FOOT ACTUATED

FA


WATCO




Cable (Non-Testable)20-Gauge Brass Pipe • Coarse Thread: 11.5 tpi • For Brass TechNotes and extensions, see page 79.Tubular Brass

528-CA Overflow length plus drain lengthcannot exceed 28 inches.

Overflow Length = 20 inches Drain Length = 8 inches

538-CA Overflow length plus drain lengthcannot exceed 38 inches.

Overflow Length = 28 inches Drain Length = 10 inches

DRAIN

OV

ER

FLO

W

LENGTH

LEN

GTH

1.5"(38 mm)

.75"(19 mm)

528 Series Rough-In Measurements

538s:10 PER CARTON

528s:12 PER CARTON

538-CA-BRS-BZ

For Slip “N Solder® unit, add suffix “U” to product number.

528-CA-BRS-CP .......

538-CA-BRS-CP .......

567-LT-BRS-CP .................................567-PP-BRS-CP .................................567-PF-BRS-CP .................................567-FA-BRS-CP .................................

PRESFLO®

FOOT ACTUATED

568s:10 PER CARTON

567s:12 PER CARTON

568-LT-BRS-CP .................................568-PP-BRS-CP .................................568-PF-BRS-CP .................................568-FA-BRS-CP .................................

567-LT-BRS-CPRough-In Dimensions

13.0

” - 1

5.75

”

17.625” - 18.375”

12.0”

538 Cable 20-Gauge Fits Most Tubs up to 24” Deep

528 Cable 20-Gauge Fits Most Tubs up to 16” Deep

568 Chicago-Code 17-Gauge Fits Most Tubs up to 24” DeepAvailable in Chrome Plate Finish Only

567 Chicago-Code 17-Gauge Fits Most Tubs up to 16” DeepAvailable in Chrome Plate Finish Only

568-LT-BRS-CPRough-In Dimensions

18.0

” - 2

0.75

”

22.625” - 23.375”

12.0”

Chicago-Code1.5” 17-Gauge Brass Pipe • Coarse Thread: 11.5

PRESFLO®

FOOT ACTUATED

For 17-gauge, add $6.70 to 528 prices.

For 17-gauge, add $7.70 to 538 prices.

Cable Trim Kits: Page 53

Trim Kits: Pages 54 / Tub Closures: Pages 58


17-G

auge

Chi

cago

Cod

e: 5

67 /

568

– 20

-Gau

ge C

able

: 528

/ 53

8

183.15

203.85

142.65145.85144.25142.65

160.20163.80162.00160.20


AP 95.80 CB 67.65BB 139.20 NP 67.65BN 67.65 PB 64.40BZ 67.65 WI 100.60

AP 95.80 CB 67.65BB 139.20 NP 67.65BN 67.65 PB 64.40BZ 67.65 WI 100.60

1.25” 17-Gauge Brass Pipe • Fine Thread: 18 tpiLavatory Drains

for outside threads on 801’s,add “ot” to number.

EXAMPLE: 801-PP-BRS-BN-OT

800 With Overflow

ABS PLASTIC WITH OVERFLOW;FINE THREAD

800-PP-BRS-CP ...800-PF-BRS-CP ...

700-PP-ABS-CP .........

801-PP801-PF-OT800-PP

I.D. 1.34”18 Threads per inch

O.D. 1.51” Flange dia. 2.12” Body Height 1.20”

O.D. 1.25” 18 Threads per inch

Thread Length 3” Tube Length 7”

LAVATORY DRAINS WITHOUT OVERFLOW

8”

801-PP801-PF

Outside ThreadsO.D. 1.51”

16 Threads per inchAdditional Parts:

rubber washer, red gasket, brass locknut

LAVATORY DRAINSWITH OVERFLOW

Model 800-PPModel 800-PF

I.D. 1.34” - 18 Threads per inch

O.D. 1.51” Flange dia. 2.12” Body Height 1.20”

O.D. 1.25” Threads 1.25” O.D.18 Threads per inch

Thread Length 3” Tube Length 7”

8”

PRESFLO®

700 - ABSWith Overflow

801 Without Overflow

801-PF

801-PP-BRS-CP ...801-PF-BRS-CP ...

PRESFLO®

20 PER CARTON

20 PER CARTON

Push Pull® and PresFlo®

stoppers are available in boththe 800 and 801 models.


Lavatory Drains: 800 / 801 / 700

44.1044.10

44.1044.10

15.80

12..........12” Chrome Lav Tube .........add PT7 ......7” Plated Lav Tube .............add PT12 .....12” Plated Lav Tube ...........add

BN-BZ-CB-NP-PB only.Example: 800-PP-BRS-BN-PT12 for 12” BN plated tubeThese add-on prices reflect the subtraction of the

original lav tube price.

800/801 SPECIAL DRAIN TUBESPlease use the following codes when ordering

lav drains with an upgraded drain tube:

8.4536.9550.35


WATCO


INTRODUCING

Makes Old Bathtub DrainsLook New in Minutes!

®®

Before

WATCOWATCO

AfterBefore After

Universal NuFitTrim Kits & Tub ClosuresMost Trim Kits and Tub Closures can be carded. Put “-C” at end of number.

Tub Closures...A Strainer Body and a Stopper Assembly

What makes a Trim Kit?Usually a Tub Closure and a Faceplate (also known as a Clean Out or Overflow Plate) as well as any other required parts

Tub Closurewith

BushingAdapter

Or a Strainer Body Cover and a Stopper Assembly

Stopper Assembly

StrainerBody

Knobscrews onto...

FlangeThreads

For threads per inch, count peaks or

valleys, not both.

“Boss”

Breakdown of a Tub Closure...

Stopperwith Seal

Faceplates...(also known as a Clean Out or Overflow Plate)

1-Hole Faceplate

with 1 Screw

Innovator®Snap-On Faceplate

2-Hole Faceplate

with 2 ScrewsTrip Lever Faceplate, Cotter Pin, with 2 Screws


Trim

Kit

& T

ub C

losu

re O

ptio

ns &

Info

rmat

ion


INTRODUCING

Makes Old Bathtub DrainsLook New in Minutes!

®®

Before

WATCOWATCO

AfterBefore After

Universal NuFit

CP BB BN BS BZ Chrome Plated Brushed Bronze Brushed Nickel Biscuit Oil-Rubbed Bronze

CB NP PB WH Chrome Brushed Nickel Polished Polished Brass White

NINE POPULAR FINISHES AVAILABLE

Universal N

uFit ® Trim K

its & Tub C

losures


WATCO


#10-243/8-5/16

48750-PP-CP-G48750-PP-BB-G48750-PP-BN-G48750-PP-BS-G48750-PP-BZ-G48750-PP-CB-G48750-PP-NP-G48750-PP-PB-G48750-PP-WH-G


48750-PP-CP-G-3P48750-PP-BB-G-3P48750-PP-BN-G-3P48750-PP-BS-G-3P48750-PP-BZ-G-3P48750-PP-CB-G-3P48750-PP-NP-G-3P48750-PP-PB-G-3P48750-PP-WH-G-3P



Uni

vers

al N

uFit®

Tri

m K

its &

Tub

Clo

sure

s

#10-243/8-5/16

Universal NuFit® Trim Kits & Tub Closures

948700-PP-CP-GPP Trim Kit with Gridand Silicone Packet

948701-PP-CP-GPP Trim Kit with Gridand #11547 Pin (-47)

48700-PP-CP-GPP Trim Kit with Gridand Silicone Packet

48701-PP-CP-GPP Trim Kit with Gridand #11547 Pin (-47)

48750-PP-CP-GPP Tub Closure with Grid

and Silicone Packet

48751-PP-CP-GPP Tub Closure with Grid

and #11547 Pin (-47)

INNOVATOR FACEPLATE - Trim Kit with Grid

1-HOLE FACEPLATE: (For 2-Hole, add “-2H” to part number)

TUB CLOSURES - with Grid

#11547 3/8-5/16

#11547 3/8-5/16

#11547 3/8-5/16

20 PER CARTON





948700-PP-CP-G-3PPP Trim Kit with Grid,Silicone & All 3 Pins

48700-PP-CP-G-3PPP Trim Kit with Grid,Silicone & All 3 Pins

48750-PP-CP-G-3PPP Tub Closure with Grid,

Silicone & All 3 Pins



948700-PP-CP-G-2PPP Trim Kit with Grid,

Silicone, #47 & #51 Pins



48750-PP-CP-G-2PPP Tub Closure with Grid,Silicone, #47 & #51 Pins




#47 & #51 Pins


#47 & #51 Pins

48751-PP-CP-G-2PPP Tub Closure with Grid,

#47 & #51 Pins



#10-243/8-5/16

10 PER CARTON

NOTE: For carded trim kits,place “-C” at end of item number.

24.50164.3544.5542.5044.5574.3049.5049.6038.25

32.90172.7552.9550.9052.9582.7057.9058.0046.65

37.10176.95

57.1555.1057.15

86.9062.1062.2050.85

24.50164.3544.5542.5044.5574.3049.5049.6038.25

32.90172.7552.9550.9052.9582.7057.9058.0046.65

37.10176.95

57.1555.1057.15

86.9062.1062.2050.85

24.50164.3544.5542.5044.5574.3049.5049.6038.25

28.70168.55

48.7546.7048.7578.5053.7053.8042.45

24.50164.3544.5542.5044.5574.3049.5049.6038.25

28.70168.55

48.7546.7048.7578.5053.7053.8042.45

18.85120.25

35.1034.0035.1053.0539.0037.8030.60

27.25128.6543.5042.4043.5061.4547.4046.2039.00

31.45132.85

47.7046.6047.7065.6551.6050.4043.20

18.85120.25

35.1034.0035.1053.0539.0037.8030.60

23.05124.45

39.3038.2039.3057.2543.2042.0034.80


Universal N

uFit ® Trim K

its & Tub C

losures

No Silicone or Pin

94870N-PP-CP-GPP Trim Kit with GridAdd desired option.

REPLACEMENT STOPPER: Push Pull®

2-Hole Faceplate

Additional Options: (Add to Part Number)

-47#11547 Pin

3/8-5/16Brass Pin

-54#11554 Pin

1/4-20Brass Pin

-51#11551 Pin

#10-24Brass Pin

-SLSiliconePacket

+$4.20 +$4.20 +$4.20 +$4.20

+$8.40

94870N-PP-CP-G94870N-PP-BB-G94870N-PP-BN-G94870N-PP-BS-G94870N-PP-BZ-G94870N-PP-CB-G94870N-PP-NP-G94870N-PP-PB-G94870N-PP-WH-G

-2P#47 & #51

Brass Pins+$8.40

-2P2#47 & #54

Brass Pins+$12.60

-3PAll 3

Brass Pins+$4.20

-WBWatco

Bonding Strip

To add option, add $4.20 per option to item base price:

2 Options 3 Options 4 Options 5 Options Add: $8.40 $12.60 $16.80 $21.00

Examples:48750-PP-CP-G = Tub Closure with silicone, PP stopper, Grid,

Chrome finish – Cost: $20.9048700-PP-WH-G-51-WB = 1-H Trim Kit with silicone, PP stop-

per, White finish, Grid, #10-24 Pin & Bonding Strip Cost: $50.90 ($42.50 + $8.40)

4870N-PP-BN-G-54 = 1-H Trim Kit with #11554 pin only, PP stopper, with Grid, Brushed Nickel finish Cost: $49.50 ($45.30 + $4.20)

Individual Pins available in Parts section of price list.

-2HAdd to end of part number.

Push Pull® Stopper - with Grid Body

948700-PP-CP-G-47PP Trim Kit with Grid,Silicone & #11547 Pin

48700-PP-CP-G-47PP Trim Kit with Grid,Silicone & #11547 Pin

4870N-PP-CP-GPP Trim Kit with GridAdd desired option.

48750-PP-CP-G-47PP Tub Closure with Grid,

Silicone & #11547 Pin

4875N-PP-CP-GPP Tub Closure – with Grid

Add desired option.

INNOVATOR FACEPLATE – Cont.

1-HOLE – Cont.

TUB CLOSURES – Cont.

3/8-5/16

948700-PP-CP-G-47948700-PP-BB-G-47948700-PP-BN-G-47948700-PP-BS-G-47948700-PP-BZ-G-47948700-PP-CB-G-47948700-PP-NP-G-47948700-PP-PB-G-47948700-PP-WH-G-47





4870N-PP-CP-G-WBPP Trim Kit with GridWatco Bonding Strip

4870N-PP-CP-G-WB4870N-PP-BB-G-WB4870N-PP-BN-G-WB4870N-PP-BS-G-WB4870N-PP-BZ-G-WB4870N-PP-CB-G-WB4870N-PP-NP-G-WB4870N-PP-PB-G-WB4870N-PP-WH-G-WB

4875N-PP-CP-G-WBPP Tub Closure – with Grid

Watco Bonding Strip4875N-PP-CP-G-WB4875N-PP-BB-G-WB4875N-PP-BN-G-WB4875N-PP-BS-G-WB4875N-PP-BZ-G-WB4875N-PP-CB-G-WB4875N-PP-NP-G-WB4875N-PP-PB-G-WB4875N-PP-WH-G-WB

3/8-5/16

3/8-5/16

No Silicone or Pin

No Silicone or Pin

94870N-PP-CP-G-WBPP Trim Kit with GridWatco Bonding Strip

94870N-PP-CP-G-WB94870N-PP-BB-G-WB94870N-PP-BN-G-WB94870N-PP-BS-G-WB94870N-PP-BZ-G-WB94870N-PP-CB-G-WB94870N-PP-NP-G-WB94870N-PP-PB-G-WB94870N-PP-WH-G-WB

28.70168.55

48.7546.7048.7578.5053.7053.8042.45

20.30160.1540.3538.3040.3570.1045.3045.4034.05

24.50164.3544.5542.5044.5574.3049.5049.6038.25

487SA-PP-CP487SA-PP-BB4870SA-PP-BN4870SA-PP-BS4870SA-PP-BZ

6.4557.7514.157.05

11.35

32.1515.1515.156.00

28.70168.55

48.7546.7048.7578.5053.7053.8042.45

20.30160.1540.3538.3040.3570.1045.3045.4034.05

24.50164.3544.5542.5044.5574.3049.5049.6038.25

23.05124.4539.3038.2039.3057.2543.2042.0034.80

14.65116.0530.9029.8030.9048.8534.8033.6026.40

18.85120.25

35.1034.0035.1053.0539.0037.8030.60

4870SA-PP-CB4870SA-PP-NP4870SA-PP-PB4870SA-PP-WH


WATCO


Uni

vers

al N

uFit®

Tri

m K

its &

Tub

Clo

sure

s

#10-243/8-5/16

#10-243/8-5/16


948700-PP-CPPP Trim Kit without Grid

and Silicone Packet


and #11547 Pin (-47)


and Silicone Packet


and #11547 Pin (-47)

48750-PP-CPPP Tub Closure w/o Grid

and Silicone Packet

48751-PP-CPPP Tub Closure w/o Grid

and #11547 Pin (-47)

INNOVATOR FACEPLATE - Trim Kit without Grid

1-HOLE FACEPLATE: (For 2-Hole, add “-2H” to part number)

TUB CLOSURES - without Grid

#11547 3/8-5/16

#11547 3/8-5/16

#11547 3/8-5/16

20 PER CARTON

948700-PP-CP948700-PP-BB948700-PP-BN948700-PP-BS948700-PP-BZ948700-PP-CB948700-PP-NP948700-PP-PB948700-PP-WH




48750-PP-CP48750-PP-BB48750-PP-BN-G48750-PP-BS48750-PP-BZ48750-PP-CB48750-PP-NP48750-PP-PB48750-PP-WH


948700-PP-CP-3PPP Trim Kit without Grid,




48750-PP-CP-3PPP Tub Closure w/o Grid,


948700-PP-CP-3P948700-PP-BB-3P948700-PP-BN-3P948700-PP-BS-3P948700-PP-BZ-3P948700-PP-CB-3P948700-PP-NP-3P948700-PP-PB-3P948700-PP-WH-3P


48750-PP-CP-3P48750-PP-BB-3P48750-PP-BN-3P48750-PP-BS-3P48750-PP-BZG-3P48750-PP-CB-3P48750-PP-NP-3P48750-PP-PB-3P48750-PP-WH-3P

948700-PP-CP-2PPP Trim Kit without Grid,Silicone, #47 & #51 Pins

48700-PP-CP-2PPP Trim Kit without Grid,Silicone, #47 & #51 Pins

48750-PP-CP-2PPP Tub Closure w/o Grid,Silicone, #47 & #51 Pins





#47 & #51 Pins


#47 & #51 Pins

48751-PP-CP-2PPP Tub Closure w/o Grid,

#47 & #51 Pins




#10-243/8-5/16

10 PER CARTON


24.50164.3544.5542.5044.5574.3049.5049.6038.25

28.70168.55

48.7546.7048.7578.5053.7053.8042.45

24.50164.3544.5542.5044.5574.3049.5049.6038.25

32.90172.7552.9550.9052.9582.7057.9058.0046.65

37.10176.95

57.1555.1057.15

86.9062.1062.2050.85

24.50164.3544.5542.5044.5574.3049.5049.6038.25

28.70168.55

48.7546.7048.7578.5053.7053.8042.45

18.85120.25

35.1034.0035.1053.0539.0037.8030.60

31.45132.85

47.7046.6047.7065.6551.6050.4043.20

18.85120.25

35.1034.0035.1053.0539.0037.8030.60

23.05124.4539.3038.2039.3057.2543.2042.0034.80

27.25128.6543.5042.4043.5061.4547.4046.2039.00

24.50164.35

44.5542.5044.5574.3049.5049.6038.25

32.90172.7552.9550.9052.9582.7057.9058.0046.65

37.10176.95

57.1555.1057.1586.9062.1062.2050.85


32.1515.1515.156.00

Universal N

uFit ® Trim K

its & Tub C

losures

No Silicone or Pin

94870N-PP-CPPP Trim Kit without Grid

Add desired option.

2-Hole Faceplate


-47#11547 Pin

3/8-5/16Brass Pin

-54#11554 Pin

1/4-20Brass Pin

-51#11551 Pin

#10-24Brass Pin

-SLSiliconePacket

+$4.20 +$4.20 +$4.20 +$4.20

+$8.40

94870N-PP-CP94870N-PP-BB94870N-PP-BN94870N-PP-BS94870N-PP-BZ94870N-PP-CB94870N-PP-NP94870N-PP-PB94870N-PP-WH

-2P#47 & #51

Brass Pins+$8.40

-2P2#47 & #54

Brass Pins+$12.60

-3PAll 3

Brass Pins+$4.20

-WBWatco

Bonding Strip



Examples:48750-PP-CP = Tub Closure with silicone, PP stopper, no

Grid, Chrome finish – Cost: $20.9048700-PP-WH-51-WB = 1-H Trim Kit with silicone, PP stopper,

White finish, no Grid, #10-24 Pin & Bonding Strip Cost: $50.90 ($42.50 + $8.40)

4870N-PP-BN-54 = 1-H Trim Kit with #11554 pin only, PP stopper, no Grid, Brushed Nickel finish Cost: $49.50 ($45.30 + $4.20)



Push Pull® Stopper - without Grid Body

948700-PP-CP-47PP Trim Kit without Grid,


48700-PP-CP-47PP Trim Kit without Grid,


4870N-PP-CPPP Trim Kit without Grid

Add desired option.

48750-PP-CP-47PP Tub Closure w/o Grid,


4875N-PP-CPPP Tub Closure – w/o Grid

Add desired option.


1-HOLE FACEPLATE – Cont.


3/8-5/16

948700-PP-CP-47948700-PP-BB-47948700-PP-BN-47948700-PP-BS-47948700-PP-BZ-47948700-PP-CB-47948700-PP-NP-47948700-PP-PB-47948700-PP-WH-47





4870N-PP-CP-WBPP Trim Kit without Grid

Watco Bonding Strip4870N-PP-CP-WB4870N-PP-BB-WB4870N-PP-BN-WB4870N-PP-BS-WB4870N-PP-BZ-WB4870N-PP-CB-WB4870N-PP-NP-WB4870N-PP-PB-WB4870N-PP-WH-WB

4875N-PP-CP-WBPP Tub Closure – w/o Grid


3/8-5/16

3/8-5/16

No Silicone or Pin

No Silicone or Pin

94870N-PP-CP-WBPP Trim Kit without Grid


28.70168.55

48.7546.7048.7578.5053.7053.8042.45

20.30160.1540.3538.3040.3570.1045.3045.4034.05

24.50164.3544.5542.5044.5574.3049.5049.6038.25

28.70168.55

48.7546.7048.7578.5053.7053.8042.45

20.30160.1540.3538.3040.3570.1045.3045.4034.05

24.50164.3544.5542.5044.5574.3049.5049.6038.25

23.05124.4539.3038.2039.3057.2543.2042.0034.80

14.65116.0530.9029.8030.9048.8534.8033.6026.40

18.85120.25

35.1034.0035.1053.0539.0037.8030.60

REPLACEMENT STOPPER: Push Pull®

487SA-PP-CP487SA-PP-BB4870SA-PP-BN4870SA-PP-BS4870SA-PP-BZ

4870SA-PP-CB4870SA-PP-NP4870SA-PP-PB4870SA-PP-WH

6.4557.7514.157.05

11.35


WATCO


Uni

vers

al N

uFit®

Tri

m K

its &

Tub

Clo

sure

s

#10-243/8-5/16

#10-243/8-5/16


948700-FA-CP-GFA Trim Kit with Gridand Silicone Packet

948701-FA-CP-GFA Trim Kit with Gridand #11547 Pin (-47)

48700-FA-CP-GFA Trim Kit with Gridand Silicone Packet

48701-FA-CP-GFA Trim Kit with Gridand #11547 Pin (-47)

48750-FA-CP-GFA Tub Closure with Grid

and Silicone Packet

48751-FA-CP-GFA Tub Closure with Grid

and #11547 Pin (-47)

INNOVATOR FACEPLATE - FA Trim Kit with Grid

1-HOLE : (For 2-Hole, add “-2H” to part number)

TUB CLOSURES - FA with Grid

#11547 3/8-5/16

#11547 3/8-5/16

#11547 3/8-5/16

20 PER CARTON

948700-FA-CP-G948700-FA-AB-G948700-FA-BN-G948700-FA-BZ-G948700-FA-CB-G948700-FA-PB-G948700-FA-WH-G



48701-GA-CP-G48701-FA-AB-G48701-FA-BN-G48701-FA-BZ-G48701-FA-CB-G48701-FA-PB-G48701-FA-WH-G



948700-FA-CP-G-3PFA Trim Kit with Grid,Silicone & All 3 Pins

48700-FA-CP-G-3PFA Trim Kit with Grid,Silicone & All 3 Pins

48750-FA-CP-G-3PFA Tub Closure with Grid,


948700-FA-CP-G-3P948700-FA-AB-G-3P948700-FA-BN-G-3P948700-FA-BZ-G-3P948700-FA-CB-G-3P948700-FA-PB-G-3P948700-FA-WH-G-3P



948700-FA-CP-G-2PFA Trim Kit with Grid,


48700-PP-FA-G-2PFA Trim Kit with Grid,


48750-FA-CP-G-2PFA Tub Closure with Grid,Silicone, #47 & #51 Pins





#47 & #51 Pins


#47 & #51 Pins

48751-FA-CP-G-2PFA Tub Closure with Grid,

#47 & #51 Pins




#10-243/8-5/16

10 PER CARTON


28.6052.0044.5544.5574.3049.6038.25

28.6052.0044.5544.5574.3049.6038.25

21.9545.3535.1035.1053.0537.8030.60

37.0060.4052.9552.9582.7058.0046.65

41.2064.6057.1557.15

86.9062.2050.85

28.6052.0044.5544.5574.3049.6038.25

32.8056.2048.7548.7578.5053.8042.45

37.0060.4052.9552.9582.7058.0046.65

41.2064.6057.1557.15

86.9062.2050.85

28.6052.0044.5544.5574.3049.6038.25

32.8056.2048.7548.7578.5053.8042.45

30.3553.7543.5043.5061.4546.2039.00

34.5557.9547.7047.7065.6550.4043.20

21.9545.3535.1035.1053.0537.8030.60

26.1549.5539.3039.3057.2542.0034.80


Universal N

uFit ® Trim K

its & Tub C

losures

No Silicone or Pin

94870N-FA-CP-GFA Trim Kit with GridAdd desired option.

94870N-FA-CP-G94870N-FA-AB-G94870N-FA-BN-G94870N-FA-BZ-G94870N-FA-CB-G94870N-FA-PB-G94870N-FA-WH-G

2-Hole Faceplate


-47#11547 Pin

3/8-5/16Brass Pin

-54#11554 Pin

1/4-20Brass Pin

-51#11551 Pin

#10-24Brass Pin

-SLSiliconePacket

+$4.20 +$4.20 +$4.20 +$4.20

+$8.40

-2P#47 & #51

Brass Pins+$8.40

-2P2#47 & #54

Brass Pins+$12.60

-3PAll 3

Brass Pins+$4.20

-WBWatco

Bonding Strip



Examples:48750-FA-CP-G = Tub Closure with silicone, FA stopper, Grid,

Chrome finish – Cost: $20.9048700-FA-WH-G-51-WB = 1-H Trim Kit with silicone, FA stopper, White finish, Grid, #10-24 Pin &

Bonding Strip Cost: $50.90 ($42.50 + $8.40)4870N-FA-BN-G-54 = 1-H Trim Kit with #11554 pin only,

FA stopper, Grid, Brushed Nickel finish Cost: $49.50 ($45.30 + $4.20)



948700-FA-CP-G-47FA Trim Kit with Grid,Silicone & #11547 Pin

48700-FA-CP-G-47FA Trim Kit with Grid,Silicone & #11547 Pin

4870N-FA-CP-GFA Trim Kit with GridAdd desired option.

48750-FA-CP-G-47FA Tub Closure with Grid,


4875N-FA-CP-GFA Tub Closure – with Grid

Add desired option.


1-HOLE – Cont.


3/8-5/16

948700-FA-CP-G-47948700-FA-AB-G-47948700-FA-BN-G-47948700-FA-BZ-G-47948700-FA-CB-G-47948700-FA-PB-G-47948700-FA-WH-G-47





4870N-FA-CP-G-WBFA Trim Kit with GridWatco Bonding Strip

4870N-FA-CP-G-WB4870N-FA-AB-G-WB4870N-FA-BN-G-WB4870N-FA-BZ-G-WB4870N-FA-CB-G-WB4870N-FA-PB-G-WB4870N-FA-WH-G-WB

4875N-FA-CP-G-WBFA Tub Closure – with Grid

Watco Bonding Strip4875N-FA-CP-G-WB4875N-FA-AB-G-WB4875N-FA-BN-G-WB4875N-FA-BZ-G-WB4875N-FA-CB-G-WB4875N-FA-PB-G-WB4875N-FA-WH-G-WB

3/8-5/16

3/8-5/16

No Silicone or Pin

No Silicone or Pin

94870N-FA-CP-G-WBFA Trim Kit with GridWatco Bonding Strip

94870N-FA-CP-G-WB94870N-FA-AB-G-WB94870N-FA-BN-G-WB94870N-FA-BZ-G-WB94870N-FA-CB-G-WB94870N-FA-PB-G-WB94870N-FA-WH-G-WB

Foot Actuated Stopper - with Grid Body Only

FA Replacement Stopper NOT Available.

32.8056.2048.7548.7578.5053.8042.45

24.4047.8040.3540.3570.1045.4034.05

28.6052.0044.5544.5574.3049.6038.25

32.8056.2048.7548.7578.5053.8042.45

24.4047.8040.3540.3570.1045.4034.05

28.6052.0044.5544.5574.3049.6038.25

26.1549.5539.3039.3057.2542.0034.80

17.7541.1530.9030.9048.8533.6026.40

21.9545.3535.1035.1053.0537.8030.60


WATCO


LIFT AND TURN TRIM KITSPUSH PULL® TRIM KITS

PRESFLO® TRIM KITS

Trim Kits NuFit® Kits

NuFit®-Innovator® Converts conventional overflow and drain to Innovator® snap-on overflow plate and NuFit® strainer body. Includes one each of #11121 Star Retainer Nut, #11641 Adapter Bar, Innovator® Overflow Plate, NuFit® body, stopper assembly, and silicone adhesive.

948100-CP .................METAL STOPPER ........... ADD

OTHER LT FINISHES:

OTHER PP FINISHES:

OTHER PF FINISHES:

948400-CP ..................948500-CP ..................


10 PER CARTON

NuFit® NuFit® kits and tub closures easily and quickly install over existing strainer bodies, requiring only the provided silicone adhesive.

Convert an existing 1-hole or 2-hole faceplate to the Innovator® snap-on faceplate.

See next page for additional NuFit® models.

INSTRUCTIONS FOR CONVERTING AN EXISTING 1-HOLE OR 2-HOLE OVERFLOW PLATE TO A NEW WATCO SNAP-ON INNOVATOR® OVERFLOW PLATE

©2013 Watco Manufacturing Co. 1220 South Powell Road, Independence, MO 64057 816.796.3900 www.watcomfg.com 18900 0613

1. Remove old 2-hole Overflow Plate. Save old screws and re-use.2. Center and hold the Retainer Star Nut, with prongs pointing out, and

Adapter Bar onto overflow opening in position shown. 3. Pass the 2 screws through the end slots of the Adapter Bar and

thread into the Overflow Ell screw holes. 4. Snug the Adapter Bar up to the Retainer Star Nut. DO NOT OVER

TIGHTEN.5. Snap on the new Innovator Overflow Plate with the

overflow opening facing down.

1. Remove old 1-hole Overflow Plate. Save old screw and re-use.2. Thread screw all the way into the Adapter Bar.3. Center and hold the Retainer Star Nut, with prongs pointing out,

onto the overflow opening.4. Thread the screw, with adapter bar, into the Overflow Ell screw hole.5. Snug the Adapter Bar up to the Retainer Star Nut. DO NOT OVER

TIGHTEN.6. Snap on the new Innovator Overflow Plate with the overflow opening

facing down.®

WATCO

OLD (1) HOLE OVERFLOW PLATE

1-HOLE OVERFLOW ELL

OVERFLOW OPENING

2-HOLE OVERFLOW ELL


OVERFLOW OPENING

ADAPTER BAR

(2) SCREWS

RETAINERSTAR NUT

NEW INNOVATOR OVERFLOW PLATE

RETAINERSTAR NUT

ADAPTER BAR

(1) SCREW



NuF

it®-In

nova

tor®

Tri

m K

its

AP 110.95 PB 70.65BN 70.65 PN 78.45BZ 70.65 WI110.95CB 70.65

BN 72.55 PB 72.55BS 72.55 WH 72.55BZ 72.55

BN 70.65 CB 73.00BZ 70.65 PB 70.65

36.2034.10

34.105.05


Standard NuFit ® Trim

Kits &

Tub Closures

26.70

Trim Kits NuFit® KitsAVAILABLE IN 2-HOLE: Add “2H” to part number. (Example: 48100-CP-2H)

LIFT AND TURN

48400-CP ........

LIFT AND TURNREPLACEMENT STOPPER

See #38812 on page 54.

10 PER CARTON


OTHER FINISHES:

OTHER FINISHES:

OTHER FINISHES:

•

48300-CP ........

20 PER CARTON

OTHER FINISHES:

PRESFLO® PUSH PULL®

48500-CP ........10 PER CARTON

OTHER FINISHES:

•

48600-CP ........

20 PER CARTON

OTHER FINISHES:

48100-CP ........METAL STOPPER

10 PER CARTON

•

48200-CP ...............MS: METAL STOPPER

20 PER CARTON


AP 110.95 PB 70.65BN 70.65 PN 78.45BZ 70.65 WI110.95CB 70.65

BN 72.55 PB 72.55BS 72.55 WH 72.55BZ 72.55

BN 70.65 CB 73.00BZ 70.65 PB 70.65

AP 76.95 PB 51.65BN 51.65 PN 57.35BZ 51.65 WI 76.95CB 57.35

BN 51.65 PB 51.65BS 51.65 WH 51.65BZ 59.10

BN 51.65 CB 60.25BZ 57.35 PB 51.65

34.105.05

36.20 34.10

24.855.05

28.05 26.70

#48400 Trim KitBrass body, brass stopper assembly, metal overflow plate, adapter bar, screw, and silicone adhesive. Has crossbars in body.

#48200 Tub ClosureBrass body, plastic stopper assembly, suction cup, and silicone adhesive. For metal stopper, add “-MS”.

#48600 Tub ClosureBrass body, brass stopper assembly, 3/8” and 5/16” brass pins, and silicone adhesive. Old strainer body must have crossbars.

#48500 Trim KitBrass body, brass stopper assembly, 3/8” and 5/16” brass pins, metal overflow plate, adapter bar, screw, and silicone adhesive. Old strainer body must have crossbars.

NuFIT® PRESFLO® FEATURESDoes not need crossbars in old body.Requires minimum 1.490” I.D. openingFlange covers maximum of 2.875” O.D.Depth clearance needed = .850”

#48300 Tub ClosureBrass body, brass stopper assembly, and silicone adhesive. Comes with crossbars in strainer body.

NuFIT®LIFT AND TURN FEATURESDoes NOT need crossbars in old body.Requires minimum 1.390” I.D. openingFlange covers maximum of 2.875” O.D.Depth clearance needed = .390”

#48100 Trim KitBrass body, plastic stopper assembly, metal overflow plate, adapter bar, screw, suction cup, and silicone adhesive. For metal stopper, add “-MS”.

NuFIT® PUSH PULL® FEATURESOld body MUST have crossbars.Requires minimum 1.410” I.D. openingFlange covers maximum of 2.875” O.D.Depth clearance needed = .860”


WATCO


Strainer Body Covers

20 PER CARTON

Install chrome on the rough-in and easily upgrade to a special finish without removing the strainer body!• Sturdy stainless steel looks as good as the original strainer body.• No reduction in flow rate.• Produces very little additional height or inside-diameter reduction.• Uses an o-ring for a tight, snug fit (one for brass strainer bodies

and one for zinc strainer bodies).• Eliminates destroying the integrity of your test.• Eliminates labor required to remove and replace the strainer body.• Eliminates the possibility of cross-threading or damaging the tub

when replacing the strainer body, or of the drain fitting moving out of line due to being stressed during installation (can require cutting open the sheetrock to repair).

Designed for use on Watco’s coarse-thread (1.865” - 11.5) strainer bodies: brass body #01016 and zinc body #11492

Will NOT work with PRESFLO® stoppers.

Same as above but withABS Plastic Knob & Stopper

Tub Closures

91050-CP ....................

ABS plastic knob and stopper for the 921, 951, 620, 621, and 651 and 661 bath wastes. PUSH PULL & CHROME FINISH ONLY.

Lift and Turn .......91615-CP .....PUSH PULL® .......91610-CP .....Foot Actuated .....91618-CP .....

(FA ONLY in BN-BZ-CB-CP-NP-PB)

OTHERFINISHES

AVAILABLE:

1-Hole OverflowQuickTrim®

91651-PP-CP ..............

OTHER FINISHES

AVAILABLE:

Innovator® faceplate, strainer body cover, two o-rings, PUSH PULL® stopper assembly with 3/8” and 5/16” pins, adapter bar, retainer star nut, and silicone adhesive.

Lift and Turn .... 959290-CP ..PUSH PULL® .... 939290-CP ..Foot Actuated .. 969290-CP ..


OTHERFINISHES

AVAILABLE:

PUSH PULL® .......U39290-CP ..

PUSH PULL® ... U939290-CP ...


Lift and Turn ...59290-CP ...PUSH PULL® ...39290-CP ...Foot Actuated ...69290-CP ...


OTHER FINISHES

AVAILABLE:

Universal 1-Hole QuickTrim®

Brass Knob & Stopper

1-hole faceplate and faceplate screw, strainer body cover, two o-rings, PUSH PULL® stopper assembly with 3/8” and 5/16” pins, adapter bar, and silicone adhesive.

Innovator® QuickTrim®

Universal Innovator® QuickTrim®

Existing strainer body must have good crossbars.

Existing stopper is to be used and existing strainer body must have good crossbars.

20 PER CARTON

20 PER CARTON

10 PER CARTON

10 PER CARTON

10 PER CARTON

10 PER CARTON

Trim Kits QuickTrim® KitsPatented and Patents PendingSee watcomfg.com for details.

FOR 2-HOLE OVERFLOW PLATE, ADD “2H” TO ITEM NUMBER.

TO ADD STAR RETAINER NUT & ADAPTER BAR, ADD “-11” TO PART NUMBER.EXAMPLE: 959290-CP-11. ADD $3.25 TO LIST PRICE.

OTHERFINISHES

AVAILABLE:

Qui

ckTr

im® K

its &

Tub

Clo

sure

s

23.3023.3023.30

AP 71.90 BO 40.75 CB 47.55 WH 39.20BB 92.90 BS 40.75 NP 40.75 WI 71.90BN 41.15 BZ 41.15 PB 38.80

9.55


26.0526.0526.05


30.95AP 101.05 BO 60.55 CB 66.40 WH 51.90BB 135.65 BS 60.55 NP 66.55 WI 100.90BN 59.80 BZ 59.80 PB 57.65

16.9530.95

20.1520.1520.15



OTHER FINISHES

AVAILABLE:


Cable Trim

Kits

528 Brass Cable Trim Kit

Conversion kit with a short stopper converts a cable drain stopper to a Lift and Turn stopper assembly.

52800-CP...................

Overflow plate and overflow plate locking screw, TurnStyle® overflow mount without prongs, full-cover stopper with washer, and cable strainer body.

48301-CP ....................52800 48301

Trim Only Conversion Kit

Innovator Cable®

Innovator CableFlex®

Innovator Cable® Trim Kitswith ADA Handle

92999-CP ................Innovator Cable® Trim Kits

Fits all Innovator Cable® and CableFlex® models.Strainer body, core guide, cable faceplate, screw, stopper assembly, and overflow elbow retainer nut.

Trim Kits CableNOTE: For carded trim kits, place “-C” at end of item number.

QuickTrim®

Fits all Innovator Cable® and CableFlex® models.Stopper assembly, cable faceplate, screw, strainer body cover, o-ring, and cable overflow retainer nut cover.

92999-CPAD ............

Innovator Cable® Trim Kitswith ADA Handle and

QuickTrim® body cover

92888-CP ................

Innovator Cable® Trim Kits with QuickTrim® body cover

92888-CPAD ............

Repair KitFor all Innovator Cable® models

(See drawing on page 62 for what is included in Repair Kit.)

#92900

No need to replace strainer body.

92999

92888


10 PER CARTON

10 PER CARTON

41.20 23.65

45.00

59.40

45.00

59.40

20.95




APAD 261.10 BSAD 81.90 NPAD 167.45BBAD 403.75 BZAD 103.20 PBAD 167.45BNAD 97.60 CBAD 176.20 WHAD 81.90


APAD 290.10 BSAD 90.95 NPAD 186.05BBAD 448.60 BZAD 114.65 PBAD 186.25BNAD 108.40 CBAD 195.75 WHAD 90.95


WATCO


Trim Kits

AVAILABLE ONLY IN CHROME

11.5- & 12-Thread Bodies - Coarse Thread

12-Thread (Coarse Thread)

11.5-ThreadPatented/Patent Pending

11.5-Thread Innovator® (Coarse Thread)

Change trim finishes on Innovator® bath wastes.Thread size: 1.865” O.D. – 11.5 tpi x 1.25’ depth Flange: 2-7/8”Trade designation 1-1/2” x 11.5 Coarse Thread

OTHER FINISHES

AVAILABLE:

958290-CP ....938290-CP ....938250-CP ....

968290-CP ....

Includes:Innovator® OF Plate,11.5 tpi Body, and Stopper Assembly

Lift and TurnPUSH PULL®

PRESFLO®


Foot Actuated(FA: in BN-BZ-CB-CP-NP-PB)

Convert 1- or 2-hole overflow plate to Innovator® snap-on overflow. Thread size: 1.865” O.D. – 11.5 tpi x 1.25” depth Flange: 2-7/8”

91100-LT-CP ....91100-PP-CP ....91100-PF-CP ....

91100-FA-CP ....

OTHER FINISHES

AVAILABLE:

Above trim kits with 38105 Bushing, converts to 2.11” O.D. – 16 tpi

OTHER FINISHES

AVAILABLE:

Includes:Retainer Star Nut,Overflow Plate,Adapter Bar,11.5 tpi Body, Stopper Assembly

91105-LT-CP ....91105-PP-CP ....91105-PF-CP ....

91105-FA-CP ....

Fits Kohler 7150 bath wastes.


PRESFLO®




PRESFLO®


Foot Actuated(FA: BN-BZ-CB-CP-NP-PB)

...................

..............

.......

SEE PAGES 50 OR 60 FOR INSTRUCTIONS.

OTHER FINISHES

AVAILABLE:

Thread size: 1.865” O.D. x 11.5 tpi - 1.25’ depth Flange: 2-7/8”Trade designation 1-1/2” x 11.5 - Coarse Thread

58290-CP .......38290-CP .......38250-CP .......

68290-CP .......

Includes:1-Hole OF Plate,1 OF Plate Screw,11.5 tpi Body, Stopper Assembly,Adapter Bar

OTHER FINISHES

AVAILABLE:

Above trim kits with 38105 bushing, converts to 2.11” O.D. – 16 tpi

58390-CP ......38390-CP ......38280-CP ......

68390-CP ......

Fits Kohler 7150 bath wastes


PRESFLO®




PRESFLO®



WIDE FLANGE Strainer BodiesThread size: 1.865” O.D. – 11.5 tpi - 1.25” depth Flange: 3.00”Trade designation 1-1/2” x 11.5 - Coarse Thread

58296-CP .......38296-CP .......68296-CP .......

Includes:1-Hole OF Plate,1 OF Plate Screw,11.5 tpi Body with 3.00” Flange, Stopper Assembly,Adapter Bar


Foot Actuated

...................

.......

PB ...OTHER FINISH AVAILABLE:

Thread size: 1.75” O.D. – 12 tpi x 1.25” depth Flange: 2-7/8”58433-CP .......38433-CP .......68433-CP .......


Foot Actuated

...................

.......

1-Hole OF Plate,1 OF Plate Screw,12 tpi Body,Stopper Assembly,Adapter Bar

Optional#38105

BushingAbove trim kits with 38105 bushing and WIDE FLANGE Flange: 3.00”Converts to 2.11” O.D. – 16 tpi

58390W-CP ..38390W-CP ..68390W-CP ..


Foot Actuated

PB ........PB ........PB ........

10 PER CARTON


NOTE: For carded trim kits, place “-C” at end of item number.

...................

......

Trim

Kits

: Coa

rse-

Thre

ad B

odie

s - 1

1.5

& 1

2 tp

i

*PN ...PresFlo® only




25.7524.1021.95

22.50

26.7024.9525.25

23.30

28.3526.8024.65

24.00

36.7036.7034.00

34.55

36.9535.3033.15

33.65

42.7542.7540.70

33.7033.5530.45

55.60

65.9565.9565.95

AP 95.10 BO 46.75 CB 65.15 PN* 65.15BB 128.70 BS 54.50 NP 54.50 WH 47.60BN 55.85 BZ 55.85 PB 46.75 WI 95.10




AP104.20 BO 64.80 CB 75.10 PN* 75.10BB 136.80 BS 64.80 NP 64.80 WH 58.05BN 64.35 BZ 64.35 PB 64.80 WI 104.20

WITH SNAP-ON OVERFLOW PLATE

1-Hole OF PlateFOR 2-HOLE OVERFLOW PLATE,ADD “2H” TO ITEM NUMBER.(Example: 58290-CP-2H)

TRIM KITS TO CONVERT OLD OVERFLOW TO WATCO’S INNOVATOR® SNAP-ON OVERFLOW PLATE

32.2532.2532.25


BN 56.95 BZ 56.95 PB 51.80BO 57.55 CB 66.45 WH 57.55

Trim Kits

Thread size: 1.625” O.D. – 16 tpi x 1.25” depth Flange: 2-7/8”91600-LT-CP ....91600-PP-CP ....91600-PF-CP ....

91600-FA-CP ....

Change trim finishes on Innovator® Plus bath wastes.Thread size: 1.625” O.D. – 16 tpi x 1.25” depth Flange: 2-7/8”Trade designation 1-3/8” x 16 - Fine Thread

OTHER FINISHES

AVAILABLE:

OTHER FINISHES

AVAILABLE:

OTHER FINISHES

AVAILABLE:

Above trim kits with 38101 bushing converts to 1.865” O.D. – 11.5 tpi

14- & 16-Thread Bodies - Fine Thread

OTHER FINISHES

AVAILABLE:

OTHER FINISHES:

OTHER FINISHESAVAILABLE:

Innovator® 16-Thread (Fine Thread) 16-Thread (Fine Thread) 1-Hole OF

Includes:Retainer Star Nut,Overflow Plate,Adapter Bar,16 tpi Body,Stopper Assembly

958080-CP .....938080-CP .....938260-CP .....

968080-CP .....

Includes:Innovator® OF Plate,16 tpi Body,Stopper Assembly

958190-CP ........938190-CP ........938270-CP ........

968190-CP ........

Includes:Retainer Star Nut,Overflow Plate,Adapter Bar,16 tpi Body,Stopper Assembly,38101 Bushing

For the Innovator® Plus940/941 Series only

Thread size: 1.625” O.D. – 16 tpi x 1.25” depth Flange: 2-7/8”Trade designation 1-3/8” x 16 - Fine Thread

58080-CP .......38080-CP .......38260-CP .......

68080-CP .......

Includes:1-Hole OF Plate,1 OF Plate Screw,16-tpi Body,Stopper Assembly,Adapter Bar

OTHER FINISHES

AVAILABLE:

Above trim kits with 38101 bushing converts to 1.865” O.D. – 11.5 tpi

58190-CP ......38190-CP ......38270-CP ......

68190-CP ......

Includes:1-Hole OF Plate,1 OF Plate Screw,16-tpi Body,Stopper Assembly,Adapter Bar,38101 Bushing

Thread size: 1.375” O.D. – 16 tpi x 1.5” depth with Flange: 2-7/8”38112 bushing, converts to 1.625” O.D. – 14 tpi

51612-CP ......38212-CP ......

Change trim finishes on 1-Hole bath wastes.Thread size: 1.625” O.D. – 14 tpi x 1.25” depth Flange: 2-7/8”Trade designation 1-3/8” x 14

Includes: 1-Hole OF Plate, Screw, 14 tpi Body, Stopper Assembly, Adapter Bar

58490-CP ..........38490-CP ..........68490-CP ..........

OTHER FINISHESAVAILABLE:

14-Thread (Fine Thread) - 1-Hole OF Thread size: 1.625” O.D. – 16 tpi x 1” depth Flange: 2-7/8”38090-CP ......

16-Thread: 1” body depth (Fine Thread)

38420-CP ......

Thread size: 1-11/16” O.D. – 16 tpi x 1” depth Flange: 2-7/8”Trade designation 1-11/16”

Chrome only.


PRESFLO®



...................

..............

.......


PRESFLO®



...................

..............

.......


PRESFLO®



...................

..............

.......


PRESFLO®



...................

..............

.......


PRESFLO®



...................

..............

.......


Foot Actuated(FA: BN-BZ-CB-CP-NP-PB) NO NP.

...................

.......


...................

PUSH PULL®.........

PUSH PULL®.........

NOTE: For carded trim kits, place “-C” at end of item number.

Convert 1- or 2-Hole to Snap-On Overflow

Bushing Body Trim Kit & #38112 Bushing

#38112 Bushing

With 38104 bushing converts to 1.9” O.D. – 14 tpi38194-CP ......PUSH PULL®.........

10 PER CARTON

10 PER CARTON

10 PER CARTON


Trim K

its: Fine-Thread Bodies - 14 &

16 tpi


*PN ...PresFlo® only*PN ...PresFlo® only


25.7525.2525.10

23.55

27.3528.6523.80

26.05

28.8028.3025.35

25.90

31.2032.7037.10

31.20

41.7043.70

27.7029.0027.05

26.85

40.65

34.10






BN 67.75 BZ 67.75 CB 63.85 WH 74.50BO 70.95 CB 77.90 PB 63.85

AB 62.45 BO 58.05 PB 52.25 WH 58.05

Change trim finishes on 1-Hole bath wastes.For 2-Hole Overflow plate,add “2H” to item number.(Example: 58080-CP-2H)

WITH SNAP-ON OVERFLOW PLATE

32.9532.8034.05

29.70


WATCO


Trim Kits Trip-Lever Type Kits

TRIP LEVER WITH LINKAGE & DROP

Fits up to 16” Trip Lever models.Trip lever faceplate assembly (QUICK ADJUST® clevis), trip lever linkage parts, 5.25” double-loop wire, and drop cylinder. NO screws included.

10770-PVCFaceplate, Linkage, and Drop Cylinder

Fits up to 24” Trip Lever models.Trip lever faceplate assembly (QUICK ADJUST® clevis), Trip Lever linkage parts, standard 5.25” double-loop wire plus four additional wires, and a drop cylinder. NO screws included.

Faceplate, Linkage, Drop Cylinder, Extra Double-Loop Wires

NOTE: for carded trim kits,Place “-C” at end of item number.

*Indicate if drop cylinder is ABS or PVC.

PLASTIC LIST PRICE BRASS LIST PRICE


10770-*____-CP ......... 10770-BRS-CP .......

PLASTIC LIST PRICE BRASS LIST PRICE10771-*____-CP ......... 10771-BRS-CP .........

#10950 Trip Lever Quick Adjust® Clevis, #10952 TL Linkage Nut, #10953 Eye Bolt, #10954 5-1/4” Double-Loop Wire, #10930 Cotter Pin annealed, and appropriate Drop Cylinder.

38660-BRS ......38660-ABS ......38660-PVC ......

38660-BRS

TRIM ONLY TRIP LEVER & SLIPLOCK®

LINKAGE ONLY (TRIP LEVER)

38661-CP ........

1-Hole Overflow Plate, Overflow Plate Screw, Adapter Bar, Dome Strainer Cover, Strainer Cover Plate Screw, #11490CP 16-tpi trip lever strainer body, and #38101 bushing

Covers existing trip-lever-type strainer body. One each of the Dome Strainer Cover and Strainer Cover Plate Screw.

18660-CP .....

18661-CP ........Dome Strainer Cover, Strainer Cover Plate Screw, #11490CP 16-tpi trip lever strainer body, and the #38101 bushing.

Dome Strainer Cover, Strainer Cover Plate Screw, trip lever strainer body, NO bushing.

Dome Strainer Cover Kits

Dome Strainer Cover and Screw

Dome Strainer Cover and Screw, 16-tpi Body, and Bushing 38101 Bushing converts to 11.5 tpi

Dome Strainer Cover and Screw, Strainer Body, NO Bushing

38702-CP ..........

10 PER CARTON

For either plastic or brass bath wastesOne trip lever faceplate assembly, two overflow plate screws, one cotter pin, one strainer body dome cover and screw.

TRIP LEVER WITH LINKAGE, WIRES & DROP

Dome Strainer Cover and Bushing Trim Kit38101 Bushing converts to 11.5 tpi

20 PER CARTON

12 PER CARTON

20 PER CARTON

20 PER CARTON

20 PER CARTON

10771-PVC

Trip

-Lev

er T

ype

Trim

Kits

Coarse-Thread 11.5 tpi .....18662-CP ........Fine-Thread 16 tpi ............18663-CP ........

22.95

14.108.208.20

2.40

8.408.40

15.50

13.80

16.30

30.50 36.40






BN 70.95 BZ 70.95 PB 68.85BO 68.85 CB 81.80 WH 68.85BS 68.85 NP 68.85 WI 94.50BN 50.65 BZ 50.65 PB 39.60

BO 41.75 CB 59.10 WH 39.60BS 41.75 NP 41.75 WI 71.80



22.20


Trim Kits Trip Lever • SLIP LOCK® • TURNSTYLE®

TURNSTYLE® TRIM & LINKAGE

20200-CP

TURNSTYLE® Assembly only

For models up to 16”



38770

Fits up to 16” Trip Lever models.Trip lever faceplate assembly (QUICK ADJUST® clevis), Trip Lever linkage parts, 5.25” double-loop wire, drop cylinder, overflow plate screws, and strainer cover plate and screw.

38771

Fits up to 24” Trip Lever models.

Trip lever faceplate assembly (QUICK ADJUST® clevis), Trip Lever linkage parts, 5.25” double-loop wire plus four additional wires, drop cylinder, overflow plate screws, and strainer cover plate and screw.

TRIP LEVER ALL TRIM, LINKAGE & DROP

38770-*____-CP ......... 38770-BRS-CP .........



Chrome Only

38771-*____-CP ......... 38771-BRS-CP .........

ALL TRIM, LINKAGE, DROP & EXTRA WIRES

SLIP LOCK®

TRIP LEVER

20 PER CARTON

3817038180

39100-CP .................

Same as above but NO STRAINER BODY.

Thread size: 1.625” O.D. – 16 tpi x 1.25” depth Flange: 2-7/8”38170-CP .......

OTHER FINISHES

AVAILABLE:

Thread size: 1.865” O.D. – 11.5 tpi x 1.25’ depth Flange: 2-7/8””38180-CP .......

Change trim finishes and linkage on SLIP LOCK® bath wastes.NO DROP CYLINDER.

39100 20 PER CARTON

20 PER CARTON

12 PER CARTON

12 PER CARTON

Trip Lever - Slip Lock® - Turnstyle

® Trim K

its

20 PER CARTON

39500-CP 39551-CP

For models up to 24”

• •

19.00

32.40

17.90

24.90

38.30

34.20

27.05

32.70

32.70

38.10


BN 67.85 BZ 67.85 NP 67.85BO 67.85 CB 79.15 PB 67.85BS 67.85



BN 68.35 NP 55.90BO 55.90 PB 57.75BS 57.65 WH 59.95BZ 68.35 WI 105.45CB 68.35

BN 76.70 NP 62.75BO 62.75 PB 64.85BS 64.70 WH 67.30BZ 76.70 WI 115.10CB 76.70


BN 67.85 BZ 67.85 NP 67.85 WH 67.85BO 67.85 CB 79.15 PB 67.85 WI 96.05BS 67.85


WATCO




AP 69.55 BO 42.00 CB 48.80 PB 37.80 WH 44.10BB 104.25 BS 44.10 NP 44.10 PN* 47.20 WI 69.55BN 41.85 BZ 41.85

AP 77.05 BO 57.50 CB 67.10 PB 53.55 WH 54.20BB 122.55 BS 60.65 NP 60.65 PN* 67.10 WI 77.05BN 57.55 BZ 57.55

LIFT AND TURN - 3/8” PIN ONLY

Tub Closures NOTE: For carded trim kits,place “-C” at end of item number. Coarse-Thread Bodies

58329-CP ......38329-CP ......38370-CP ......68329-CP ...... 58333-CP ....

38333-CP ....68333-CP ....


Foot Actuated

...........................................................................

...................................

Replacement Stoppers

38810-CP .......

38812-CP .......

Standard Length ..........

NuFit; short pin ............

FOOT ACTUATED - 3/8” OR 5/16” PIN38412-CP .......

5/16” Pin .......................

Replacement Seal ........

38410-CP .......

11519 ..............ABS

Plastic

3/8” Pin .........................

Brass knob and stopper

11.5 THREADS PER INCH (Coarse-Thread)

58305-CP .....38305-CP .....38360-CP .....68305-CP .....

1.865” O.D. – 11.5 tpi x 1.25” depth Flange: 2-7/8”ABS plastic knob and stopper; trade designation 1-3/8” x 16

38651-CP ...38921-CP ...

PUSH PULL® Zinc Strainer BodyPUSH PULL® Brass Strainer Body

................

Available only in Chrome Plated

11.5-Thread Strainer Body and Stopper AssemblyTrade designation 1-1/2” x 11.5

1.865” O.D. – 11.5 tpi x 1.25” depth Flange: 2-7/8”

11.5 THREADS PER INCH (Cont.)

WITH 38105 BUSHING Converts to 2.11” – 16Lift and TurnPUSH PULL®

PRESFLO® (NOT in AB-BO-WH)Foot Actuated (BN-BZ-CB-CP-NP-PB)

...................................................................

.......

Wide-Flange strainer body with stopper assembly

1.865” O.D. – 11.5 tpi x 1.25” depth WIDE Flange: 3”

1.750” O.D. – 12 tpi x 1.25” depth Flange: 2-7/8”

Available only in Chrome Plated

12 THREADS PER INCH (Coarse-Thread)

#38610-#38710-#38540-

Brass knob and stopper

PUSH PULL® - WITH ONE PIN

38710-CP ...

3/8” Pin: Brass Knob/Stopper ... 38610-CP ...5/16” Pin: Brass Knob/Stopper .

#38516-CPBrass knob and stopper

PUSH PULL® - WITH 3/8” & 5/16” PINS

38516-CP ...Brass Knob/Stopper ..............Other Finishes Available:

38530-CP ....ABS Knob/Stopper ................Available only in Chrome

Other Finishes Available:

20 PER CARTON

58306-CP ......38306-CP ......68306-CP ......


Foot Actuated

...................

..............

PB ......PB ......PB ......

38540-CP ...1/4” Pin: Brass Knob/Stopper ...

20 PER CARTON


PRESFLO® (NOT in AB-BO-BS-WH)Foot Actuated (BN-BZ-CB-CP-NP-PB)

.......................................

....................................................

......

Other Finishes:

Other Finishes Available:

38520-CP ....3/8” Pin: ABS Knob/Stopper ....

Universal NuFit® PP Replacement Stopper:See pages 45 or 47

Tub

Clo

sure

s: C

oars

e-Th

read

Bod

ies

- 11.

5 &

12

tpi -

Rep

lace

men

t Sto

pper

s

LIFT AND TURN

LT

PUSH PULL®

PP

FOOT ACTUATED

FA

PRESFLO®

PF





7.55

20.8021.0020.4017.85

33.5533.9036.1033.55

12.50

15.50

14.65

10.25

13.5017.70

25.9026.1023.00

43.0043.0043.00

23.4523.4523.45

7.95BN 20.90 CB 24.40 NP 20.90 PB 20.90BZ 20.90

BN 33.30 BZ 33.30 CB 34.95 PB 33.30


Also available, Tub Closures

with Adapter Bushings

(-59)

12.0511.8514.75

0.80

7.70


AP 86.05 BO 60.65 CB 65.35 PN 67.80BB 120.75 BS 60.65 NP 60.65 WH 60.65BN 65.35 BZ 65.35 PB 60.65 WI 86.05

LIFT AND TURN

LT

PUSH PULL®

PP

FOOT ACTUATED

FA

PRESFLO®

PF

Tub Closures NOTE: For carded trim kits,place “-C” at end of item number. Fine-Thread Bodies

14 THREADS PER INCH (Fine-Thread)

Other Finishes:

38312-CP ......

38313-CP ......

38325-CP ......

Stopper Assembly and 16-tpi, Wide-Flange Strainer Body

58319-CP ....38319-CP ....38219-CP ....68319-CP ....

58321-CP ....38321-CP ....38385-CP ....68321-CP ....

58317-CP ....38317-CP ....38375-CP ....68317-CP ....

Bushing Strainer Body and Stopper AssemblyTrade designation 1-3/8” x 16 (See page 56 for adapter bushings.)

58220-CP .......38220-CP .......

58309-CP .....38309-CP .....38395-CP .....68309-CP .....


PRESFLO® (NOT in AB-BO-WH)Foot Actuated (BN-BZ-CB-CP-PB)

....................................

.................................................

......


................................

................................






Stopper assembly and 16-tpi Strainer BodyTrade designation 1-3/8” x 16

58301-CP ....38301-CP ....38380-CP ....68301-CP ....



.......................................

....................................................

......

Other Finishes:

WITH 38101 BUSHING Converts to 1.865” – 11.5

WITH 38102 BUSHING Converts to 1.8” – 14

Stopper assembly and 14-tpi Strainer BodyTrade designation 1-3/8” x 14


1.625” O.D. – 16 tpi x 1.25” depth WIDE Flange: 3.0”

1.625” O.D. – 14 tpi x 1.25” depth WIDE Flange: 3.0”Stopper Assembly and 14-tpi, Wide-Flange Strainer Body

16 THREADS PER INCH (Fine-Thread)



Other Finishes:

16 THREADS PER INCH (Cont.)



7.55



With 38101 bushing: to 1.865” O.D. x 11.5With 38102 bushing: to 1.8” O.D. x 14 .....

58308-CP ......38308-CP ......68308-CP ......


Foot Actuated

...................

..............

PB ........PB ........PB ........

58307-CP ......38307-CP ......68307-CP ......


Foot Actuated

...................

.......

PB ......PB ......PB ......

20 PER CARTON

Other Finishes:

58350-CP ....38350-CP ....

Lift and TurnPRESFLO® (NOT in AB-BO-BS-WH)






PUSH PULL® Body Depth: 1”Tub Closure without bushing ...............

Tub Closures: Fine-Thread B

odies - 14 & 16 tpi

BN 44.00 BZ 48.40 PB 36.25BO 36.90 PO 48.45 WH 38.45

BN 44.45 BZ 51.85 PB 40.40BO 47.10 CB 51.85 WH 40.40



BO 44.30 PB 44.30 WH 44.30

23.9525.1523.9023.95

26.1026.1024.85

42.3542.3542.35

20.8028.2534.30

25.3025.8524.85

42.3542.3542.35

23.8024.65

20.8021.2023.2517.85

28.5029.2029.4527.25

36.0537.15

35.5537.3538.4035.55

37.9039.8040.7537.90

Tub Closures withAdapter Bushings also available.

(Page 58-59)




WATCO


NOTE: For carded trim kits, place “-C” at end of item number. Faceplate Kits

18001-CP ...........

Includes one #01002 faceplate and one #01024 faceplate screw.

18002-CP ..........

Includes one #01003 faceplate and two #01024 faceplate screws.

18009-CP ..........

Converts 1-or 2-hole faceplate to the Innovator® faceplate. Includes faceplate, retainer star nut, and adapter bar.

18702-CP ..........

Includes one #10700 trip lever faceplate assembly, two #01024 faceplate screws, and one #10930 cotter pin.

18003-CP ...........

Same Kit but with Adapter Bar Includes one #01002 faceplate, one #01024 faceplate screw, and one #11641 adapter bar.

See below for conversion instructions.

1-Hole Faceplate Kits 2-Hole Faceplate Kits

Innovator® Faceplate Kits

Trip Lever Faceplate Kits


10 PER CARTON

10 PER CARTON

With Overflow Plate Kit #18009 (above), convert an existing 1-hole or 2-hole faceplate to the Innovator® snap-on faceplate.

INSTRUCTIONS FOR CONVERTING AN EXISTING 1-HOLE OR 2-HOLE OVERFLOW PLATE TO A NEW WATCO SNAP-ON INNOVATOR® OVERFLOW PLATE

©2013 Watco Manufacturing Co. 1220 South Powell Road, Independence, MO 64057 816.796.3900 www.watcomfg.com 18900 0613

1. Remove old 2-hole Overflow Plate. Save old screws and re-use.2. Center and hold the Retainer Star Nut, with prongs pointing out, and

Adapter Bar onto overflow opening in position shown. 3. Pass the 2 screws through the end slots of the Adapter Bar and

thread into the Overflow Ell screw holes. 4. Snug the Adapter Bar up to the Retainer Star Nut. DO NOT OVER

TIGHTEN.5. Snap on the new Innovator Overflow Plate with the

overflow opening facing down.

1. Remove old 1-hole Overflow Plate. Save old screw and re-use.2. Thread screw all the way into the Adapter Bar.3. Center and hold the Retainer Star Nut, with prongs pointing out,

onto the overflow opening.4. Thread the screw, with adapter bar, into the Overflow Ell screw hole.5. Snug the Adapter Bar up to the Retainer Star Nut. DO NOT OVER

TIGHTEN.6. Snap on the new Innovator Overflow Plate with the overflow opening

facing down.®

WATCO


1-HOLE OVERFLOW ELL

OVERFLOW OPENING

2-HOLE OVERFLOW ELL


OVERFLOW OPENING

ADAPTER BAR

(2) SCREWS

RETAINERSTAR NUT


RETAINERSTAR NUT

ADAPTER BAR

(1) SCREW


10 PER CARTON

Face

plat

e K

its -

Face

plat

e C

onve

rsio

n In

stru

ctio

ns

7.10

8.70

10.95

9.05

7.05



• Faceplate Diameter - 3 ⅜″ • Faceplate Diameter - 3 ⅜″

• Faceplate Diameter - 3 ⅜″

• Faceplate Diameter - 3 ⅜″

• Faceplate Diameter - 3 ⅛″


AP 41.65 BO19.55 CB 29.70 WH 22.80BB 76.40 BS19.85 NP 19.55 WI 41.65BN 25.45 BZ25.45 PB 19.55

35.90 25.40 40.45 29.6529.65 29.65 25.40 46.1034.65 34.65 29.30

APBBBN

BOBSBZ

CPNPPB

WH WI


Bushing A

dapters & A

ccessoriesParts Bushing Adapters & Accessories

BRASS ADAPTER BUSHINGS

PROD# COLOR CONVERTS: O.D. Body Threads to O.D. Bushing Threads LIST

38101 Green................. converts from 1.625” - 16.............to 1.865” - 11.5......................... 38102 Blue.................... converts from 1.625” - 16.............to 1.8” - 14................................ 38103 Red.................... converts from 1.625” - 16.............to 1.802” - 16............................ 38104 Orange............... converts from 1.625” - 16.............to 1.9” - 14................................ 38105 Purple................. converts from 1.865” - 11.5..........to 2.11” - 16.............................. 38106 Pink.................... converts from 1.865” - 11.5..........to 2.35” - 11.5........................... 38107 Lt. Blue............... converts from 1.625” - 16.............to 1.735” - 16............................ 38108 Lt. Green ............ converts from 1.625” - 16.............to 1.865” - 16 (.5” Height)........ 38109 Brown................. converts from 1.625” - 16.............to 1.75” - 12.............................. 38110 Silver.................. converts from 1.625” - 16.............to 1.865” - 14............................ 38111* White.................. converts from 1.375” - 16.............to 1.625” - 16............................ 38112* Yellow................. converts from 1.375” - 16.............to 1.625” - 14............................ 38113* Black & White..... converts from 1.375” - 16.............to 1.813” - 14........................... 38114* Black................... converts from 1.375” - 16.............to 1.75” - 12.............................. 38115 Red & Blue......... converts from 1.865” - 11.5..........to 2.00” - 16.............................. 38116* Orange & Purple converts from 1.375” - 16.............to 1.6615” - 18.......................... * Fits the 01033__ bushing strainer body on page 31-37.

NEW!! WATCO’S IMPROVEDSTRAINER BODY REMOVAL TOOL

Fits standard strainer bodies and the Innovator® Drain crossbars.

38100BUSH: Bushing Display Board with Bushings #38101 - #38116

11111-SETCOLOR SAMPLE SET

11579Set of both the

#11573 and #11574

115736” DIAL CALIPER (4-Way Measure)

11574THREAD-GAUGE SET

STRAINER BODY MEASURING KIT

SCH40CD-ABS ........SCH40CD-PVC ........

SCHEDULE 40 CONDENSATE ADAPTER

To include adapter with bath waste, add “-CD” to part number.Example: 900-FA-PVC-BN-CD

204.25

10121

6.7013.0514.2016.3015.7533.1520.7017.7522.4527.0527.0527.0529.2529.2527.4535.35

48.15 24.10

72.25

20.95

34.80

Test Cap for Innovator® Schedule 40 series..................

Green Test Plug with “O”-Ring-Type Washer.................

3/8” Test Plug, metal threads...........................................

New Test Kit for 600 Series bath wastes, plastic.........Includes one #11575 and one #11594 test plug (listed individually below).1/4” Test Plug.................................................................3/8” Test Plug.................................................................

TEST CAPS & TEST PLUGS PROD # LIST PRICE

11575

11594

11575

1111411114 1.30

11575 2.50

11587 10.05

11565 3.75

11594 1.2511575 2.50

11587

3.953.95


WATCO


1

Spec Sheets Innovator® Testable CableInnovator CableFlex® • Innovator Cable®

14

18

928-CA (Tubs up to 16” deep):Flexible PVC Tubing: 1.5” x 11.75”21” Cable (#18)938-CA (Tubs up to 24” deep):Flexible PVC Tubing: 1.5” x 20.25”34” Cable (#18)948-CA (Tubs up to 36” deep):Flexible PVC Tubing: 1.5” x 32.0”48” Cable (#18)

928/938/948-CA(Same as 970/980/990 except

Part #14 is flexible tubing.)

1. 01032__* ..Cable Faceplate Screw, 1/4-20x1-3/4............ with Screw Guide #01081 2. 01019__* ..Cable Faceplate................................................ 3. 01047__* ...Cable Overflow Elbow Retainer Nut............... 4. 01037 ........Cable Adapter/Drive Shaft Screw, #8x5/8..... 5. 01071 ........Cable Faceplate Adapter - Thin...................... 6. 01072 ........Cable Faceplate Adapter - Medium................ 7. 01073 ........Cable Faceplate Adapter - Thick.................... 8. 20145 ........Cable Drive Shaft............................................. 9. 01036 ........Cable Retainer/Overflow Ell Screw #8x7/8.... 10. 20146 ........Cable Retainer.................................................. 11. 10694 .......Overflow Elbow Gasket Half Height............... 12. 10675 ........Overflow Elbow Gasket.................................... 13. 11029 ........1-1/2” Schedule 40 Cable OF Elbow, ABS.... 14029 ........1-1/2” Schedule 40 Cable OF Elbow, PVC.... 14. 970: SCHABS-11.75.....Sch 40 Pipe, ABS, 1.5” x 11.75”..... 970: SCHPVC-11.75.....Sch 40 Pipe, PVC, 1.5” x 11.75”..... 980: SCHABS-20.25.....Sch 40 Pipe, ABS, 1.5” x 20.25”... 980: SCHPVC-20.25.....Sch 40 Pipe, PVC, 1.5” x 20.25”... 990: SCHABS-32.00.....Sch 40 Pipe, ABS, 1.5” x 32.00”... 990: SCHPVC-32.00.....Sch 40 Pipe, PVC, 1.5” x 32.00”...

ITEM PART# DESCRIPTION

15. 14011 .........1-1/2” Schedule 40 Sanitary Tee, ABS............. 14010 .........1-1/2” Schedule 40 Sanitary Tee, PVC............. 16. 970: SCHABS-4.625.....Sch 40 Pipe, ABS, 1.5” x 4.625”... 970: SCHPVC-4.625.....Sch 40 Pipe, PVC, 1.5” x 4.625”... 980: SCHABS-11.75.....Sch 40 Pipe, ABS, 1.5” x 11.75”..... 980: SCHPVC-11.75.....Sch 40 Pipe, PVC, 1.5” x 11.75”..... 990: SCHABS-11.75.....Sch 40 Pipe, ABS, 1.5” x 11.75”..... 990: SCHPVC-11.75.....Sch 40 Pipe, PVC, 1.5” x 11.75”..... 17. 20151-54 ....Cable Core........................................................... 18. 20161 .........Cable Conduit....................................................... 19. 11016 .........1-1/2” Schedule 40 Cable Drain Elbow, ABS... 14016 .........1-1/2” Schedule 40 Cable Drain Elbow, PVC... 20. 10696 ........Drain Elbow Gasket............................................. 21. 01016__* ...Strainer Body, Brass, 1.865” - 11.5x1.25”......... 22. 20147 .........Cable Core Guide.............................................. 23. 92867-__* ..Cable Stopper Assembly – includes:................ 24. 20069 .......Stopper Adjusting Screw.............................. 25. 11526 ........Cable Stopper Seal, 1-1/16” .......................26. 11575 .............Test Plug with O-Ring-Type Gasket..................OPTIONAL: 27. 92874-__* ..ADA Handle and Handle Set Screw................. 28. 01076 .........Cable Theft-Resistant Device............................

ITEM PART# DESCRIPTION

* Please indicate desired finish.

Optional Features:#27 92874-__* ADA Handle #28 01076 ......Theft-Resistant Device

Innovator Cable® Half Kits:

971/981/991-CAParts #1 thru #13 and #17 thru #27

325

6

7

27

4

89

10

12

11

13

14

15

16

23

22

21

20

19

OptionalTheft-Resistant

Device OptionalADA

Handle

28

26

1718

970/980/990-CA

24

25

Repair Kit#92900

Parts #4 thru #10and #17

Spec

She

et: I

nnov

ator

® T

esta

ble

Cab

le

1.35

8.60

3.45

0.40

1.70

1.90

2.15

1.20

0.55

1.05

1.70

1.70

8.358.00

5.304.15

9.157.10

14.4011.20

5.105.10

2.101.65

5.304.15

5.304.15

0.35

.80

9.70

9.350.95

10.452.457.600.550.852.50

18.05

0.35


1

1

1

7

10

2

2

3

3

4

4

5

5

6

6

11

11

7

8

11

8

9

9

12

10

1314

Spec Sheets: WatcoFlex PP / Flex900-PP Innovator

®

Spec SheetsWatcoFlex® PP Parts List (Flexible; Coarse Thread)

ITEM PART# DESCRIPTION LIST PRICE

Flex916/924 Innovator® PP Parts List (Flexible; Coarse Thread) ITEM PART# DESCRIPTION LIST PRICE

1. 01010CP .....Knob, Brass ..................................................... 2. 11510 ..........PP 3/8” Pin (11532) and Friction Ring (11505) 3. 01013CP .....Stopper, Brass ................................................. 4. 11507 ..........Stopper Seal, 1-1/16” dia. ................................ 5. 01016CP .....Strainer Body, Brass, 1.865”-11.5 x 1.25” ........ 6. 10696 ..........Drain Ell Gasket, 1.90” I.D., 2.75” O.D., gray .. 7. Flexible PVC Tubing Factory-Assembled with: 11027 ..........Direct Drain Tee, 11.5 tpi, Sch. 40 ABS .......... 11020 .......... Innovator® Overflow Elbow, Sch. 40 ABS ....... OR 14027 ..........Direct Drain Tee, 11.5 tpi, Sch. 40 PVC .......... 14020 .......... Innovator® Overflow Elbow, Sch. 40 PVC ....... 8. 10675 ..........Overflow Elbow Gasket, 2-1/4 I.D., 3-1/2 O.D., 5/8” Foam . 9. 11121 ...........Retainer Star Nut ............................................. 10. 01004CP .....Faceplate for Innovator® .................................. 11. 11575 ..........Test Plug with O-Ring-type Gasket .................

1. 01010CP .....Knob, Brass ..................................................... 2. 11510 ..........PP 3/8” Pin (11532) and Friction Ring (11505) 3. 01013CP .....Stopper, Brass ................................................. 4. 11507 ..........Stopper Seal, 1-1/16” dia. ................................ 5. 01016CP .....Strainer Body, Brass, 1.865”-11.5 x 1.25” ........ 6. 10696 ..........Drain Ell Gasket, 1.90” I.D., 2.75” O.D., gray .. 7. 14008 ..........Drain Elbow, 11.5 tpi, Schedule 40, PVC ........ 8. SCHPVC-4.625...Pipe, Schedule 40 PVC, 1.5” x 4.625” ..... 9. 14010 ..........Sanitary Tee, Schedule 40, PVC ..................... 10. (not sold separately) ..Flex916: Flexible Tubing, 1.5” x 16.0” ..... Flex924: Flexible Tubing, 1.5” x 24.0” .... #10 FACTORY-WELDED TO #11: 11. 14020 .......... Innovator® Overflow Ell, Schedule 40, PVC .... 12. 10675 ..........Overflow Elbow Gasket, 2-1/4 I.D., 3-1/2 O.D., 5/8” Foam . 13. 11121 ...........Retainer Star Nut ............................................. 14. 01004CP .....Faceplate for Innovator® .................................. 15. 11575 ..........Test Plug with O-Ring-type Gasket .................

PUSH PULL® Coarse Thread

1. 01010CP 01010___*2. 115103. 01013CP 01013___*4. 115075. 01016CP 01016___*

LIFT & TURN Coarse Thread

1. 01010CP 01010___*2. 110793. 110884. 11290CP 01013___*5. 115076. 11492CP 01016___*

PRESFLO® Coarse Thread1. 11145CP 11145___*2. 111323. 11060CP 11060___*4. 96039: Suction Cup for removing stopper

FOOT ACTUATED Coarse Thread

1. 38412CP 38412___*2. 11492CP 01016___*

OPTIONAL TUB CLOSURES FOR COARSE-THREAD BATH WASTES (FINE-THREAD ON PAGE 5)

See optional stopperassemblies below.

See optional stopperassemblies below.

Flexible Tubing

Flexible tubing NOT sold separately.

PVC ONLY

Flexible tubing NOT sold separately.

2.45

2.50

11.30

1.15

10.45

0.95

4.85

4.65

5.10

4.65

1.70

1.70

3.40

2.50

2.45

2.50

11.30

1.15

10.45

0.95

4.85

1.65

5.10

4.65

1.70

1.70

3.40

2.50


WATCO


1. 01010CP .....Knob, Brass ..................................................... 2. 11510 ..........PP 3/8” Pin (11532) and Friction Ring (11505) 3. 01013CP .....Stopper, Brass ................................................. 4. 11507 ..........Stopper Seal, 1-1/16” dia. ................................ 5. 01022CP .....Strainer Body, Brass, 1.625” - 16 - 1.25” ......... 6. 10693 ..........Drain Flange Gasket, Perfect Fit® ................... 7. 11022 ..........Drain Flange, Perfect Fit®, ABS ...................... 14022 ..........Drain Flange, Perfect Fit®, PVC ...................... 8. 11023 ..........Drain/Overflow Elbow, Perfect Fit®, ABS ........ 14023 ..........Drain/Overflow Elbow, Perfect Fit®, PVC ........ 9. SCHABS-4.625...Pipe, Schedule 40 ABS, 1.5” x 4.625” ..... SCHPVC-4.625...Pipe, Schedule 40 PVC, 1.5” x 4.625” ..... 10. 14011 ..........Sanitary Tee, Schedule 40 ABS ...................... 14010 ..........Sanitary Tee, Schedule 40 PVC ...................... 11. SCHABS-11.75...Pipe, Schedule 40 ABS, 1.5” x 11.75” ...... SCHPVC-11.75...Pipe, Schedule 40 PVC, 1.5” x 11.75” ...... 12. 11023 ..........Drain/Overflow Elbow, Perfect Fit®, ABS ........ 14023 ..........Drain/Overflow Elbow, Perfect Fit®, PVC ........ 13. 11021 ..........Overflow Flange, Perfect Fit®, ABS................. 14021 ..........Overflow Flange, Perfect Fit®, PVC ................ 14. 10694 ..........Overflow Flange Gasket, Perfect Fit® ............. 15. 01002CP .....1-Hole Faceplate, Metal .................................. 16. 01024CP .....Faceplate Screw, 2.25” ....................................

400-PP Parts List (Schedule 40; Fine Thread) ITEM PART# DESCRIPTION LIST PRICE

1. 38412CP .....Foot Actuated Stopper, 3/8” pin, ABS plastic .. 2. 11492CP .....Strainer Body, Zinc, 1.865”-11.5 x 1.25” .......... 01016CP .....Strainer Body, Brass, 1.865”-11.5 x 1.25” ........ 3. 10696 ..........Drain Ell Gasket, 1.90” I.D., 2.75” O.D., gray .. 4. 11008 ..........Drain Ell, Schedule 40 ABS............................. 14008 ..........Drain Elbow, 11.5 tpi, Schedule 40, PVC ........ 5. SCHABS-4.625...Pipe, Schedule 40 ABS, 1.5” x 4.625” ..... SCHPVC-4.625...Pipe, Schedule 40 PVC, 1.5” x 4.625” ..... 6. 14011 ..........Sanitary Tee, Schedule 40 ABS ...................... 14010 ..........Sanitary Tee, Schedule 40 PVC ...................... 7. SCHABS-11.75...Pipe, Schedule 40 ABS, 1.5” x 11.75” ...... SCHPVC-11.75...Pipe, Schedule 40 PVC, 1.5” x 11.75” ...... 8. 11009 ..........1-Hole Overflow Ell, Schedule 40 ABS ........... 14009 ..........1-Hole Overflow Ell, Schedule 40 PVC ........... 9. 10675 ..........Overflow Elbow Gasket, 2-1/4 I.D., 3-1/2 O.D., 5/8” Foam . 10. 01002CP .....1-Hole Faceplate, Brass .................................. 11. 01024CP .....Faceplate Screw, 2.25” ....................................

600-FA Parts List (Schedule 40; Coarse Thread) ITEM PART# DESCRIPTION LIST PRICE

See optional stopperassemblies on page 63.

Spec

She

ets:

400

-PP

/ 600

-FA

Sch

edul

e 40

See optional fine-thread stopperassemblies on

page 5.

1

1

10

6

11

7

12

8

2

3

4

5

6

2

7

3

8

4

13

9

14

10

15

16

11

9

5

2.45

2.50

11.30

1.15

10.25

1.25

4.654.90

4.654.65

2.101.65

5.105.10

5.304.15

4.654.65

4.904.90

1.70

4.25

2.15

8.35

7.6010.45

0.95

4.854.85

2.101.65

5.105.10

5.304.15

4.854.85

1.70

4.25

2.15

Spec Sheets Schedule 40



Spec Sheets: 400-PP / 600-FA Schedule 40 Spec Sheets: 600-TS / 900-PP Schedule 40

1. 01040CP .....Strainer Cover Plate Screw ............................. 2. 01006CP .....Strainer Cover Plate ........................................ 3. 11495CP .....Strainer Body, Metal, 1.865” - 11.5 - 1.25” ...... 4. 10696 ..........Drain Ell Gasket, 1.90” I.D., 2.75” O.D., gray .. 5. 11008 ..........Drain Ell, Schedule 40, ABS............................ 14008 ..........Drain Elbow, 11.5 tpi, Schedule 40, PVC ........ 6. SCHABS-4.625...Pipe, Schedule 40 ABS, 1.5” x 4.625” ..... SCHPVC-4.625...Pipe, Schedule 40 PVC, 1.5” x 4.625” ..... 7. 11017 ..........Tee with Seat, Schedule 40 ABS .................... 14017 ..........Tee with Seat, Schedule 40 PVC .................... 8. SCHABS-12...Pipe, Schedule 40 ABS, 1.5” x 12.0” ............ SCHPVC-12...Pipe, Schedule 40 PVC, 1.5” x 12.0” ............ 9. 10096 ..........2-Hole Overflow Ell, Schedule 40, ABS .......... 10098 ..........2-Hole Overflow Ell, Schedule 40, PVC .......... 10. 10675 ..........Overflow Elbow Gasket, 2-1/4 I.D., 3-1/2 O.D., 5/8” Foam . 11. 11531 ..........Retainer Plate for Schedule 40 ....................... 12. 11540 ..........Retainer Plate Screw ....................................... 13. 20200-CP ...TURNSTYLE® Assembly ................................. 14. 10954 ..........5.25” Double-Loop Wire .................................. 15. 11005 ..........Drop Cylinder, ABS .......................................... 14005 ..........Drop Cylinder, PVC.......................................... 16. 01024CP .....Overflow Plate Screw, 2.25” ............................ 17. 20030CP ....Cable Faceplate, Brass ................................... 18. 20140 ..........Cable Faceplate Locking Screw ......................

600-TS Parts List (Schedule 40; Coarse Thread) ITEM PART# DESCRIPTION LIST PRICE

1. 01010CP .....Knob, Brass ..................................................... 2. 11510 ..........PP 3/8” Pin (11532) and Friction Ring (11505) 3. 01013CP .....Stopper, Brass ................................................. 4. 11507 ..........Stopper Seal, 1-1/16” dia. ................................ 5. 01016CP .....Strainer Body, Brass, 1.865”-11.5 x 1.25” ........ 6. 10696 ..........Drain Ell Gasket, 1.90” I.D., 2.75” O.D., gray .. 7. 11008 ..........Drain Ell, Schedule 40 ABS............................. 14008 ..........Drain Elbow, 11.5 tpi, Schedule 40, PVC ........ 8. SCHABS-4.625...Pipe, Schedule 40 ABS, 1.5” x 4.625” ..... SCHPVC-4.625...Pipe, Schedule 40 PVC, 1.5” x 4.625” ..... 9. 14011 ..........Sanitary Tee, Schedule 40 ABS ...................... 14010 ..........Sanitary Tee, Schedule 40 PVC ...................... 10. SCHABS-11.75...Pipe, Schedule 40 ABS, 1.5” x 11.75” ...... SCHPVC-11.75...Pipe, Schedule 40 PVC, 1.5” x 11.75” ...... 11. 11020 .......... Innovator® Overflow Ell, Schedule 40 ABS ..... 14020 .......... Innovator® Overflow Ell, Schedule 40 PVC ..... 12. 10675 ..........Overflow Elbow Gasket, 2-1/4 I.D., 3-1/2 O.D., 5/8” Foam . 13. 11121 ...........Retainer Star Nut ............................................. 14. 01004CP .....Faceplate for Innovator® .................................. 15. 11575 ..........Test Plug w/O-Ring-type Gasket .....................

900-PP Parts List (Schedule 40; Coarse Thread) ITEM PART# DESCRIPTION LIST PRICE

1

114

15

9

2

2

3

3

4

4

5

6

7

15

5

11

12

10

11

7

10

12

8

13

13

16

14

1718

6

8

9

1.35

3.75

6.25

0.95

4.854.85

2.101.65

5.355.35

5.404.20

7.207.20

1.70

1.25

0.80

17.90

1.35

2.752.75

2.15

15.35

1.90

2.45

2.50

11.30

1.15

10.45

0.95

4.854.85

2.101.65

5.105.10

5.304.15

4.654.65

1.70

1.70

3.40

2.50


Part #13 (20200-CP) consists of:10920 ..........................TL Clevis for TS10932 .............. TS Brass Hex Nut 6-3210934 ...........TS SS Mach. Screw 6-3210952 ........................... TL Linkage Nut10953 ..................Top Linkage Eye Bolt20020CP .........TS OF Mount w/Prongs20041 ............................TS Turning Pin20042 ................TS Turning Pin Sleeve20043 ..................................Cable Stop

20200-CPSee page 57.


WATCO


ITEM PART# DESCRIPTION LIST PRICE 1. 11145CP .....PF Stopper, Plastic, CT ................................... 2. 11132 ..........O-Ring, PRESFLO® Seal, CT.......................... 3. 11060CP .....Strainer Body, Brass, 1.865”-11.5 x 1.25” ........ 4. 10696 ..........Drain Ell Gasket, 1.90” I.D., 2.75” O.D., gray .. 5. 11028 ..........Drain Ell, Coarse-Thread Tubular, ABS........... 14028 ..........Drain Ell, Coarse-Thread Tubular, PVC .......... 6. 11580 ..........Slip Joint Nut, ABS .......................................... 11581 ..........Slip Joint Nut, PVC .......................................... 7. 11583 ..........Slip Joint Polywasher ...................................... 8. 11000 ..........Tee, Tubular ABS ............................................. 14000 ..........Tee, Tubular PVC ............................................. 9. 11003 ..........Overflow Ell, Tubular ABS ............................... 14003 ..........Overflow Ell, Tubular PVC ............................... 10. 10675 ..........Overflow Elbow Gasket, 2-1/4 I.D., 3-1/2 O.D., 5/8” Foam . 11. 11530 ..........Retainer Plate .................................................. 12. 11540 ..........Retainer Plate Screw ....................................... 13. 01003CP .....2-Hole Faceplate, Metal .................................. 14. 01024CP .....Faceplate Screw, 2.25” .................................... 15. 96039 .........Suction Cup for removing stopper ...................

500-PF Parts List (Tubular Plastic; Coarse Thread)

1. 01010CP .....Knob, Brass ..................................................... 2. 11510 ..........PP 3/8” Pin (11532) and Friction Ring (11505) 3. 01013CP .....Stopper, Brass ................................................. 4. 11507 ..........Stopper Seal, 1-1/16” dia. ................................ 5. 01022CP .....Strainer Body, Brass, 1.625” - 16 - 1.25” ......... 6. 10693 ..........Drain Flange Gasket, Perfect Fit® ................... 7. 11022 ..........Drain Flange, Perfect Fit®, ABS ...................... 14022 ..........Drain Flange, Perfect Fit®, PVC ...................... 8. 11023 ..........Drain/Overflow Elbow, Perfect Fit®, ABS ........ 14023 ..........Drain/Overflow Elbow, Perfect Fit®, PVC ........ 9. SCHABS-4.625 .......Pipe, Schedule 40 ABS, 1.5” x 4.625” ...... SCHPVC-4.625.......Pipe, Schedule 40 PVC, 1.5” x 4.625” ...... 10. 14011 ..........Sanitary Tee, Schedule 40 ABS ...................... 14010 ..........Sanitary Tee, Schedule 40 PVC ...................... 11. SCHABS-11.75 ..........Pipe, Schedule 40 ABS, 1.5” x 11.75” ...... SCHPVC-11.75 .......Pipe, Schedule 40 PVC, 1.5” x 11.75” ...... 12. 11020 .......... Innovator® Overflow Ell, Schedule 40 ABS ..... 14020 .......... Innovator® Overflow Ell, Schedule 40 PVC ..... 13. 10675 ..........Overflow Elbow Gasket, 2-1/4 I.D., 3-1/2 O.D., 5/8” Foam . 14. 11121 ...........Retainer Star Nut ............................................. 15. 01004CP .....Faceplate for Innovator® .................................. 16. 11575 ..........Test Plug w/O-Ring-type Gasket .....................

940-PP Parts List (Schedule 40; Fine Thread) ITEM PART# DESCRIPTION LIST PRICE

See optional stopper assemblies onpage 63.

See optional stopper

assemblies onpage 63.

Spec

She

ets:

940

-PP

Sche

dule

40

/ 500

-PF

Tubu

lar

Plas

tic

1

1

2

2

7

3

3

6

4

4

5

5

15

8

7

6

6

7

8

16

1312

11

1415

9

10

10

12 149

1113

2.45

2.50

11.30

1.15

10.25

1.25

4.654.90

4.654.65

2.101.65

5.105.10

5.304.15

4.654.65

1.70

1.70

3.40

2.50

4.65

0.70

13.90

0.95

4.004.00

0.700.70

0.60

5.105.10

5.305.30

1.70

1.15

0.80

4.25

2.15

0.70


Spec Sheets Tubular Plastic


Spec Sheets: 500-TQ / 500-TS Tubular Plastic

ITEM PART# DESCRIPTION LIST PRICE 1. 01040CP .....Strainer Cover Plate Screw .............................. 2. 01006CP .....Strainer Cover Plate .......................................... 3. 11495CP ......Strainer Body, Zinc, 1.865” - 11.5 - 1.25” ......... 4. 10696 ..........Drain Ell Gasket, 1.90” I.D., 2.75” O.D., gray ... 5. 11028 ...........Drain Ell, Coarse-Thread Tubular, ABS ............ 14028...........Drain Ell, Coarse-Thread Tubular, PVC ............ 6. 11580 ...........Slip Joint Nut, ABS ........................................... 11581 ...........Slip Joint Nut, PVC ........................................... 7. 11583 ...........Slip Joint Polywasher ........................................ 8. 11000 ...........Tee, Tubular ABS .............................................. 14000 ..........Tee, Tubular PVC .............................................. 9. N/A ..............QUICK ADJUST® Label 10. 11003 ...........Overflow Ell, Tubular ABS ................................ 14003 ..........Overflow Ell, Tubular PVC ................................ 11. 10675...........Overflow Elbow Gasket, 2-1/4 I.D., 3-1/2 O.D., 5/8” Foam .. 12. 11530 ...........Retainer Plate ................................................... 13. 11540 ...........Retainer Plate Screw ........................................ 14. 10700CP .....Trip Lever Faceplate Assembly ........................ 15. 10930 ..........Cotter Pin .......................................................... 16. 10950 ..........Trip Lever QUICK ADJUST® “Q” Clevis ............ 17. 10953 ..........Top Linkage Eye Bolt ........................................ 18. 10954 ..........5.25” Double-Loop Wire ................................... 19. 11005 ...........Drop Cylinder, ABS ........................................... 14005 ..........Drop Cylinder, PVC ........................................... 20. 10952 ..........Trip Lever Linkage Nut ...................................... 21. 01024CP ......Screw, Overflow Plate, 2.25” ............................

500-TQ Parts List (Tubular Plastic; Coarse Thread)

10770-(ABS or PVC)-CPSee page 56.

ITEM PART# DESCRIPTION LIST PRICE 1. 01040CP .....Strainer Plate Screw ........................................ 2. 01006CP .....Strainer Cover Plate ........................................ 3. 11495CP .....Strainer Body, Zinc, 1.865” - 11.5 - 1.25” ........ 4. 10696 ..........Drain Ell Gasket, 1.90” I.D., 2.75” O.D., gray .. 5. 11028 ..........Drain Ell, Coarse-Thread Tubular, ABS........... 14028 ..........Drain Ell, Coarse-Thread Tubular, PVC .......... 6. 11580 ..........Slip Joint Nut, ABS .......................................... 11581 ..........Slip Joint Nut, PVC .......................................... 7. 11583 ..........Slip Joint Polywasher ...................................... 8. 11000 ..........Tee, Tubular, ABS ............................................ 14000 ..........Tee, Tubular, PVC ............................................ 9. 11003 ..........Overflow Ell, Tubular, ABS .............................. 14003 ..........Overflow Ell, Tubular, PVC .............................. 10. 10675 ..........Overflow Elbow Gasket, 2-1/4 I.D., 3-1/2 O.D., 5/8” Foam . 11. 11530 ..........Retainer Plate .................................................. 12. 11540 ..........Retainer Plate Screw ....................................... 13. 20200-CP ...TURNSTYLE® Assembly ................................. 14. 10954 ..........5.25” Double-Loop Wire .................................. 15. 11005 ..........Drop Cylinder, ABS .......................................... 14005 ..........Drop Cylinder, PVC.......................................... 16. 01024CP .....Overflow Plate Screw, 2.25” ............................ 17. 20030CP ....Cable Faceplate, Brass ................................... 18. 20140 ..........Cable Faceplate Locking Screw ......................

500-TS Parts List (Tubular Plastic; Coarse Thread)

1

1

2

2

7

7

3

3

6

6

4

4

5

5

8

8

7

7

6

6

11

10

13

1216

18

21

17

1516 20

17

18

14

19

15

9

9

10

12

11

14

13

1.353.756.250.954.004.000.700.70

0.605.105.10

5.305.301.701.15

0.806.550.60

2.051.501.352.752.750.602.15

1.35

3.75

6.25

0.95

4.004.00

0.700.70

0.60

5.105.10

5.305.30

1.70

1.15

0.80

17.90

1.35

2.752.75

2.15

15.35

1.90

Spec Sheets Tubular Plastic

Part #13 (20200-CP) consists of:10920 ..................... TL Clevis for TS10932 ..........TS Brass Hex Nut 6-3210934 ...... TS SS Mach. Screw 6-3210952 .......................TL Linkage Nut10953 ............. Top Linkage Eye Bolt

20020CP .... TS OF Mount w/Prongs20041 ....................... TS Turning Pin20042 ........... TS Turning Pin Sleeve20043 ............................. Cable Stop

20200-CPSee page 57.


WATCO


ITEM PART# DESCRIPTION LIST PRICE

1. 11145CP .....PRESFLO® Stopper, Plastic, 1.5”, for CT ........ 2. 11132 ..........PRESFLO® Seal, for CT .................................. 3. 11060CP .....Strainer Body, Brass 1.865” - 11.5 - 1.25” ....... 4. 96039 .........Suction Cup for removing PRESFLO® stopper 5. 10696 ..........Drain Ell Gasket, 1.90” I.D., 2.75” O.D., gray .. 6. 44006 .........Drain Ell, Brass, 1.865” - 11.5 .......................... 7. 17GA-4.75 ..Drain Ell Tube, Brass (17 Gauge), 4.75” .......... 20GA-4.75 ..Drain Ell Tube, Brass (20 Gauge), 4.75”.......... 8. 41580 ..........Brass Slip Nut .................................................. 9. 11583 ..........Slip Joint Polywasher ...................................... 10. 17GA-3.5 ....Tail Piece (17 Gauge), 3.5” .............................. 20GA-3.5 ....Tail Piece (20 Gauge), 3.5” .............................. 11. 44001 ..........Brass Tee ......................................................... 12. 17GA-9.625....Overflow Ell Tube (17 Gauge), 9.625” ........... 20GA-9.625....Overflow Ell Tube (20 Gauge), 9.625” .......... 13. 44003 .........Brass Overflow Ell ........................................... 14. 40675 ..........Overflow Ell Washer for Brass ........................ 15. 11530 ..........Retainer Plate .................................................. 16. 41540 ..........Brass Screw for Brass Retainer Plate ............. 17. 01003CP .....2-Hole Faceplate, Metal .................................. 18. 01024CP .....Faceplate Screw ..............................................

501- & 502-PF Parts List (Brass; Coarse Thread)

See optional stopper

assemblies on page 63..

ITEM PART# DESCRIPTION LIST PRICE 1. 01010CP .....Knob, Brass ..................................................... 2. 11510 ..........PP 3/8” Pin (11532) and Friction Ring (11505) 3. 01013CP .....Stopper, Brass ................................................. 4. 11507 ..........Stopper Seal, 1-1/16” dia. ................................ 5. 01016CP .....Strainer Body, Brass, 1.865”-11.5 x 1.25” ........ 6. 10696 ..........Drain Ell Gasket, 1.90” I.D., 2.75” O.D., gray .. 7. 11028 ..........Drain Ell, Coarse-Thread Tubular, ABS........... 14028 ..........Drain Ell, Coarse-Thread Tubular, PVC .......... 8. 11580 ..........Slip Joint Nut, ABS .......................................... 11581 ..........Slip Joint Nut, PVC .......................................... 9. 11583 ..........Slip Joint Polywasher ...................................... 10. 11000 ..........Tee, Tubular ABS ............................................. 14000 ..........Tee, Tubular PVC ............................................. 11. 11019 .......... Innovator® Overflow Ell, Tubular ABS ............. 14019 .......... Innovator® Overflow Ell, Tubular PVC ............. 12. 10694 ..........(2) Overflow Flange Gasket, Foam.............ea. 13. 11121 ...........Retainer Star Nut ............................................. 14. 01004CP ..... Innovator® Faceplate ........................................ 15. 11114 ........... Innovator® Test Cap ......................................... 16. 11575 ..........Test Plug w/O-Ring-type Gasket ......................

590-PP Parts List (Tubular Plastic; Coarse Thread)


Spec

She

ets:

590

-PP

Tubu

lar

Plas

tic /

501

& 5

02 -

PF T

ubul

ar B

rass

1

2

3

4

5

6

12 15

16

13 14

98 7

10

9

8

11

1

2

9

3

8

5

4

7

6

11

10

9

8

1413

16 18

12

1517

2.45

2.50

11.30

1.15

10.45

0.95

4.004.00

0.700.70

0.60

5.105.10

4.654.90

1.70

1.70

3.40

1.30

2.50

4.65

0.70

13.90

0.70

0.95

12.10

8.357.85

2.30

0.60

6.155.80

20.90

16.9015.90

10.05

1.80

1.15

0.60

4.25

2.15

Spec Sheets

Spec Sheets

Tubular Plastic

Tubular Brass


Spec Sheets: 501 & 502 -TQ

/ 591-PP

1. 01040CP .....Strainer Cover Plate Screw .............................. 2. 01006CP .....Strainer Cover Plate .......................................... 3. 11495CP ......Strainer Body, Zinc, 1.625” - 11.5 - 1.25” .......... 4. 10696 ..........Drain Ell Gasket, 1.90” I.D., 2.75” O.D., gray .. 5. 44006 ..........Brass Drain Ell, 1.865” - 11.5 ............................ 6. 17GA-4.75 ...Drain Ell Tube, Brass (17 Gauge), 4.75” ........... 20GA-4.75 ...Drain Ell Tube, Brass (20 Gauge), 4.75” ........... 7. 41580 ...........Brass Slip Nut ................................................... 8. 11583 ...........Slip Joint Polywasher ........................................ 9. 17GA-3.5 .....Tail Piece (17 Gauge), 3.5” ............................... 20GA-3.5 .....Tail Piece (20 Gauge), 3.5” ............................... 10. 44001 ..........Brass Tee .......................................................... 11. 17GA-9.625 .Overflow Ell Tube (17 Gauge), 9.625” .............. 20GA-9.625 .Overflow Ell Tube (20 Gauge), 9.625” .............. 12. 44003 ..........Overflow Ell, Brass ........................................... 13. 40675 ..........Overflow Ell Washer for Brass.......................... 14. 11530 ...........Retainer Plate ................................................... 15. 41540 ...........Brass Screw for Brass Retainer Plate .............. 16. 10700CP .....TL Faceplate Assembly .................................... 17. 10930 ..........Cotter Pin (Not shown-behind face plate) ........ 18. 10950 ..........Quick Adjust “Q” Clevis ..................................... 19. 10953 ..........Top Linkage Eye Bolt ........................................ 20. 10954 ..........5.25” Double-Loop Wire ................................... 21. 41005 ...........Brass Drop Cylinder for Brass .......................... 22. 10952 ..........TL Linkage Nut .................................................. 23. 01024CP ......Screw, Overflow Plate, 2.25” ............................

501- & 502-TQ & Trip Lever Parts List (Brass; Coarse Thread) ITEM PART# DESCRIPTION LIST PRICE

10770-BRS-CPSee page 56.

1. 01010CP .....Knob, Brass ..................................................... 2. 11510 ..........PP 3/8” Pin (11532) and Friction Ring (11505) 3. 01013CP .....Stopper, Brass ................................................. 4. 11507 ..........Stopper Seal, 1-1/16” dia. ................................ 5. 01016CP .....Strainer Body, Brass, 1.865”-11.5 x 1.25” ........ 6. 10696 ..........Drain Ell Gasket, 1.90” I.D., 2.75” O.D., gray .. 7. 44006 .........Drain Ell, Brass ................................................ 8. 17GA-4.75 ..Drain Ell Tube, Brass (17 Gauge), 4.75” .......... 20GA-4.75 ..Drain Ell Tube, Brass (20 Gauge), 4.75”.......... 9. 41580 ..........Brass Slip Nut .................................................. 10. 11583 ..........Slip Joint Polywasher ...................................... 11. 17GA-3.5 ....Tail Piece (17 Gauge), 3.5” .............................. 20GA-3.5 ....Tail Piece (20 Gauge), 3.5” .............................. 12. 44001 ..........Brass Tee ......................................................... 13. 17GA-9.625 Overflow Ell Tube (17 Gauge), 9.625” ............. 20GA-9.625 Overflow Ell Tube (20 Gauge), 9.625” ............. 14. 44005 .........Overflow Ell, Brass for Innovator® ................... 15. 10675 ..........Overflow Elbow Gasket, 2-1/4 I.D., 3-1/2 O.D., 5/8” Foam . 16. 11121 ...........Retainer Star Nut ............................................. 17. 01004CP ..... Innovator® Faceplate ........................................ 18. 11114 ............Innovator® Overflow Ell Test Cap .................... 19. 11575 ..........Test Plug with O-Ring-type Gasket ..................

591-PP Parts List (Brass; Coarse Thread) ITEM PART# DESCRIPTION LIST PRICE

See optional stopperassemblies on page 63

18

19

1

2

3

4

5

6

109

8

7

11

87

6

5

9

1514 16 17

12

10

9

13

1

2

34

10

8

7

11

1312

15

23

1718

19

20

21

22

1416 1.35

3.756.250.95

12.108.357.852.300.606.155.80

20.9016.9015.9010.051.801.150.606.550.602.051.501.357.200.602.15

2.45

2.50

11.30

1.15

10.45

0.95

12.10

8.357.85

2.30

0.60

6.155.80

20.90

16.9015.90

19.95

1.70

1.70

3.40

1.30

2.50

Spec Sheets Tubular Brass

70 • February 16, 2015, Price List WATCO... Useful. Innovation.TM

Parts List Prices, Numerical01001BN Innovator® W-Overflow Plate - Brushed Nickel 63.1501001BZ Innovator® W-Overflow Plate - Brushed Chrome 63.1501001CB Innovator® W-Overflow Plate - Oil Rubbed Bronze 63.1501001CP Innovator® W-Overflow Plate - Chrome Plated 52.8001001NP Innovator® W-Overflow Plate - Nickel Polished 63.1501001PN Innovator® W-Overflow Plate - Polished Brass 66.3501001PV Innovator® W-Overflow Plate - Pearl Nickel 63.1501001WI Innovator® Overflow Plate - Wrought Iron 63.1501002AB 1-Hole Overflow Plate, Metal - Antique Brass 21.0501002AP 1-Hole Overflow Plate, Metal - Aged Pewter 26.3001002BB 1-Hole Overflow Plate, Metal - Brushed Bronze 58.1001002BN 1-Hole Overflow Plate, Metal - Brushed Nickel 20.0501002BO 1-Hole Overflow Plate, Metal - Bone 14.3501002BS 1-Hole Overflow Plate, Metal - Biscuit 14.3501002BZ 1-Hole Overflow Plate, Metal - Oil Rubbed Bronze 20.0501002CB 1-Hole Overflow Plate, Metal - Chrome Brushed 20.0501002CP 1-Hole Overflow Plate, Metal - Chrome Plated 4.2501002NP 1-Hole Overflow Plate, Metal - Nickel Polished, PVD 14.3501002PN 1-Hole Overflow Plate, Metal - Pearl Nickel, PVD 21.0501002PV 1-Hole Overflow Plate, Metal - Polished Brass, PVD 14.3501002WH 1-Hole Overflow Plate, Metal - White 14.3501002WI 1-Hole Overflow Plate, Metal - Wrought Iron 26.3001003AB 2-Hole Overflow Plate, Metal - Antique Brass 21.0501003AP 2-Hole Overflow Plate, Metal - Aged Pewter 26.3001003BB 2-Hole Overflow Plate, Metal - Brushed Bronze 61.0001003BN 2-Hole Overflow Plate, Metal - Brushed Nickel 20.0501003BO 2-Hole Overflow Plate, Metal - Bone 14.3501003BS 2-Hole Overflow Plate, Metal - Biscuit 14.3501003BZ 2-Hole Overflow Plate, Metal - Oil Rubbed Bronze 20.0501003CB 2-Hole Overflow Plate, Metal - Chrome Brushed 20.0501003CP 2-Hole Overflow Plate, Metal - Chrome Plated 4.2501003NP 2-Hole Overflow Plate, Metal - Nickel Polished 14.3501003PN 2-Hole Overflow Plate, Metal - Pearl Nickel 21.0501003PV 2-Hole Overflow Plate, Metal - Polished Brass 14.3501003WH 2-Hole Overflow Plate, Metal - WH 14.3501003WI 2-Hole Overflow Plate, Metal - Wrought Iron 26.3001004AP Innovator® Overflow Plate - Aged Pewter 23.8501004BB Innovator® Overflow Plate - Brushed Bronze 58.5501004BN Innovator® Overflow Plate - Brushed Nickel 18.1501004BO Innovator® Overflow Plate - Bone 12.1501004BS Innovator® Overflow Plate - Biscuit 12.1501004BZ Innovator® Overflow Plate - Oil Rubbed Bronze 18.1501004CB Innovator® Overflow Plate - Chrome Brushed 18.1501004CP Innovator® Overflow Plate - Chrome 3.4001004NP Innovator® Overflow Plate - Nickel Polished 12.1501004PN Innovator® Overflow Plate - Pearl Nickel 18.1501004PV Innovator® Overflow Plate - Polished Brass 12.1501004WH Innovator® Overflow Plate - White 12.1501004WI Innovator® Overflow Plate - Wrought Iron 23.8501006BN Dome Strainer Cover Plate - Brushed Nickel 12.1501006BO Dome Strainer Cover Plate - Bone 10.6501006BS Dome Strainer Cover Plate - Biscuit 10.6501006BZ Dome Strainer Cover Plate - Oil Rubbed Bronze 12.1501006CB Dome Strainer Cover Plate - Chrome Brushed 12.8001006CP Dome Strainer Cover Plate - Chrome Plated 3.7501006NP Dome Strainer Cover Plate - Nickel Polished 10.6501006PV Dome Strainer Cover Plate - Polished Brass 10.6501006WH Dome Strainer Cover Plate - White 10.6501006WI Dome Strainer Cover Plate - Wrought Iron 12.1501010AP PUSH PULL® Knob - Brass - Aged Pewter 10.1001010BB PUSH PULL® Knob - Brass - Brushed Bronze 20.4501010BN PUSH PULL® Knob - Brass - Brushed Nickel 7.8001010BO PUSH PULL® Knob - Brass - Bone 7.1001010BS PUSH PULL® Knob - Brass - Biscuit 7.1001010BZ PUSH PULL® Knob - Brass - Oil Rubbed Bronze 7.8001010CB PUSH PULL® Knob - Brass - Chrome Brushed 8.2001010CP PUSH PULL® Knob - Brass - Chrome Plated 2.4501010NP PUSH PULL® Knob - Brass - Nickel Polished 6.75

01010PN PUSH PULL® Knob - Brass - Pearl Nickel 8.2001010PV PUSH PULL® Knob - Brass - Polished Brass 6.7501010WH PUSH PULL® Knob - Brass - White 7.1001010WI PUSH PULL® Knob - Brass - Wrought Iron 9.7501013AB PUSH PULL® Brass Stopper - Antique Brass 16.7001013AP PUSH PULL® Brass Stopper - Aged Pewter 17.3501013BB PUSH PULL® Brass Stopper - Brushed Bronze 33.0001013BN PUSH PULL® Brass Stopper - Brushed Nickel 15.9001013BO PUSH PULL® Brass Stopper - Bone 15.4501013BS PUSH PULL® Brass Stopper - Biscuit 15.4501013BZ PUSH PULL® Brass Stopper - Oil-Rubbed Bronze 15.9001013CB PUSH PULL® Brass Stopper - Chrome Brushed 16.7001013CP PUSH PULL® Brass Stopper - Chrome 11.3001013NP PUSH PULL® Brass Stopper - Polished Nickel 16.2501013PV PUSH PULL® Brass Stopper - Polished Brass 15.4501013WH PUSH PULL® Brass Stopper - White 15.4501013WI PUSH PULL® Brass Stopper - Wrought Iron 17.5001016AB PP & LT Brass Strainer Body 1.865-11.5-1.25-AB 22.2501016AP PP & LT Brass Strainer Body 1.865-11.5-1.25-AP 26.7001016BB PP & LT Brass Strainer Body 1.865-11.5-1.25-BB 62.3501016BN PP & LT Brass Strainer Body 1.865-11.5-1.25-BN 21.1501016BO PP & LT Brass Strainer Body 1.865-11.5-1.25-BO 17.9501016BS PP & LT Brass Strainer Body 1.865-11.5-1.25-BS 18.5501016BZ PP & LT Brass Strainer Body 1.865-11.5-1.25-BZ 21.1501016CB PP & LT Brass Strainer Body 1.865-11.5-1.25-CB 22.2501016CP PP & LT Brass Strainer Body 1.865-11.5-1.25-CP 10.4501016NP PP & LT Brass Strainer Body 1.865-11.5-1.25-NP 17.9501016PN PP & LT Brass Strainer Body 1.865-11.5-1.25-PN 22.2501016PV PP & LT Brass Strainer Body 1.865-11.5-1.25-PV 17.9501016WH PP & LT Brass Strainer Body 1.865-11.5-1.25-WH 18.5501016WI PP & LT Brass Strainer Body 1.865-11.5-1.25-WI 26.7001017AB PP only: Econ. Strainer Body 1.625-16 - 1 - AB 20.5501017BO PP only: Econ. Strainer Body 1.625-16 - 1 - BO 16.3501017CP PP only: Econ. Strainer Body 1.625-16 - 1 - CP 10.4001017PV PP only: Econ. Strainer Body 1.625-16 - 1 - PB 19.5501017WH PP only: Econ. Strainer Body 1.625-16 - 1 - WH 16.3501018AB PP & LT Strainer Body 1.625-14 x 1.25 - AB 21.1501018BN PP & LT Strainer Body 1.625-14 x 1.25 - BN 22.2501018BO PP & LT Strainer Body 1.625-14 x 1.25 - BO 17.9501018BZ PP & LT Strainer Body 1.625-14 x 1.25 - BZ 22.2501018CB PP & LT Strainer Body 1.625-14 x 1.25 - CB 22.2501018CP PP & LT Strainer Body 1.625-14 x 1.25 - CP 10.8001018PV PP & LT Strainer Body 1.625-14 x 1.25 - PV 21.1501018WH PP & LT Strainer Body 1.625-14 x 1.25 - WH 17.9501019AP Innovator® Cable Overflow Plate - AP 49.4501019BB Innovator® Cable Overflow Plate - BB 65.5501019BN Innovator® Cable Overflow Plate - BN 15.4501019BS Innovator® Cable Overflow Plate - BS 14.7001019BZ Innovator® Cable Overflow Plate - BZ 15.4501019CB Innovator® Cable Overflow Plate - CB 15.4501019CP Innovator® Cable Overflow Plate - CP 8.6001019NP Innovator® Cable Overflow Plate - NP 15.4501019PV Innovator® Cable Overflow Plate - PV 15.4501019WH Innovator® Cable Overflow Plate - WH 14.0501022AP PP & LT Strainer Body 1.625”-16 x 1.25 - AP 26.7001022BB PP & LT Strainer Body 1.625”-16 x 1.25 - BB 62.3501022BN PP & LT Strainer Body 1.625”-16 x 1.25 - BN 21.1501022BO PP & LT Strainer Body 1.625”-16 x 1.25 - BO 17.9501022BS PP & LT Strainer Body 1.625”-16 x 1.25 - BS 17.9501022BZ PP & LT Strainer Body 1.625”-16 x 1.25 - BZ 21.1501022CB PP & LT Strainer Body 1.625”-16 x 1.25 - CB 22.2501022CP PP & LT Strainer Body 1.625”-16 x 1.25 - CP 10.2501022NP PP & LT Strainer Body 1.625”-16 x 1.25 - NP 17.9501022PN PP & LT Strainer Body 1.625”-16 x 1.25 - PN 22.2501022PV PP & LT Strainer Body 1.625”-16 x 1.25 - PV 17.9501022WH PP & LT Strainer Body 1.625”-16 x 1.25 - WH 17.9501022WI PP & LT Strainer Body 1.625”-16 x 1.25 - WI 26.7001024AB Overflow Plate Screw-Brass-2.25”-Antique Brass 3.55

01024AP Overflow Plate Screw-Brass-2.25”-Aged Pewter 6.2001024BB Overflow Plate Screw-Brass-2.25”-Brushed Bronze 16.5001024BN Overflow Plate Screw-Brass-2.25”-Brushed Nickel 3.3501024BO Overflow Plate Screw-Brass-2.25”-Bone 3.0501024BS Overflow Plate Screw-Brass-2.25”-Biscuit 3.0501024BZ Overflow Plate Screw-Brass-2.25”-BZ 3.3501024CB Overflow Plate Screw-Brass-2.25”-Chrome Brushed 3.5501024CP Overflow Plate Screw-Brass-2.25”-Chrome 2.1501024NP Overflow Plate Screw-Brass-2.25”-Nickel Polished 3.0501024PN Overflow Plate Screw-Brass-2.25”-Pearl Nickel 3.5501024PV Overflow Plate Screw-Brass-2.25”-Polished Brass 3.3501024WH Overflow Plate Screw-Brass-2.25”-White 3.2001024WI Overflow Plate Screw-Brass-2.25”-Wrought Iron 6.2001026 Thumb Screw - 1/4x20 x 1.5” 0.7001030BN Overflow Plate Screw - 3-In - Brass - BN 4.8001030BZ Overflow Plate Screw - 3-In - Brass - BZ 4.8001030CP Overflow Plate Screw - 3-In - Brass - CP 2.7501031BN Overflow Plate Screw - 4-In - Brass - BN 5.6501031BZ Overflow Plate Screw - 4-In - Brass - BZ 5.6501031CP Overflow Plate Screw - 4-In - Brass - CP 3.9001032AP Cable Faceplate-to-Adapter Screw-1/4-20x1 3/4”-AP 3.3001032BB Cable Faceplate-to-Adapter Screw-1/4-20x1 3/4”-BB 3.3001032BN Cable Faceplate-to-Adapter Screw-1/4-20x1 3/4”-BN 4.7501032BS Cable Faceplate-to-Adapter Screw-1/4-20x1 3/4”-BS 14.3801032BZ Cable Faceplate-to-Adapter Screw-1/4-20x1 3/4”-BZ 4.7501032CB Cable Faceplate-to-Adapter Screw-1/4-20x1 3/4”-CB 4.7501032CP Cable Faceplate-to-Adapter Screw-1/4-20x1 3/4”-CP 1.3501032NP Cable Faceplate-to-Adapter Screw-1/4-20x1 3/4”-NP 4.7501032PV Cable Faceplate-to-Adapter Screw-1/4-20x1 3/4”-PB 6.3501032WH Cable Faceplate-to-Adapter Screw-1/4-20x1 3/4”-WH 4.7501033AB PP-LT Bushing Body 1.375- in.x16 - 1.5” - AB 24.4001033BN PP-LT Bushing Body 1.375- in.x16 - 1.5” - BO 25.6501033BO PP-LT Bushing Body 1.375- in.x16 - 1.5” - BN 18.9001033BZ PP-LT Bushing Body 1.375- in.x16 - 1.5” - BZ 25.6501033CB PP-LT Bushing Body 1.375- in.x16 - 1.5” - CB 25.6501033CP PP-LT Bushing Body 1.375- in.x16 - 1.5” - CP 11.7001033PN PP-LT Bushing Body 1.375- in.x16 - 1.5” - PN 25.6501033PV PP-LT Bushing Body 1.375- in.x16 - 1.5” - PB 18.8001033WH PP-LT Bushing Body 1.375”x16 - 1.5” - WH 18.0001036 Cable Retainer-to Overflow Screw #8x7/8 0.5501037 Cable Adapter-to-Drive Shaft Screw #8X5/8 0.4001040BN Strainer Cover Plate Screw, 2 x 10/24 - BN 5.2001040BO Strainer Cover Plate Screw, 2 x 10/24 - Bone 3.5501040BS Strainer Cover Plate Screw, 2 x 10/24 - BS 3.5501040BZ Strainer Cover Plate Screw, 2 x 10/24 - BZ 5.5001040CB Strainer Cover Plate Screw, 2 x 10/24 - CB 5.5001040CP Strainer Cover Plate Screw, 2 x 10/24 - Chrome 1.3501040NP Strainer Cover Plate Screw, 2 x 10/24 - NP 5.2001040PN Strainer Cover Plate Screw, 2 x 10/24 - PN 5.5001040PV Strainer Cover Plate Screw, 2 x 10/24 - PB 5.2001040WH Strainer Cover Plate Screw, 2 x 10/24 - WH 3.5501040WI Strainer Cover Plate Screw, 2 x 10/24 - WI 6.3001042AP PRESFLO® NuFit® Strainer Body-Aged Pewter 42.5001042BN PRESFLO® NuFit® Strainer Body-Brushed Nickel 22.9001042BZ PRESFLO® NuFit® Strainer Body-BZ 24.0501042CB PRESFLO® NuFit® Strainer Body-Chrome Brushed 24.0501042CP PRESFLO® NuFit® Strainer Body-Chrome 10.9001042PN PRESFLO® NuFit® Strainer Body-Pearl Nickel 24.0501042PV PRESFLO® NuFit® Strainer Body-Polished Brass 22.9001042WI PRESFLO® NuFit® Strainer Body-Wrought Iron 42.7001043CP NuFit® PUSH PULL® Strainer Body-Chrome 10.9001044CP NuFit® Lift and Turn Strainer Body-Chrome 9.1001046CP NuFit® Lift and Turn Short Stopper - CP 12.2001047AP Cable OE Retainer Nut - Aged Pewter 25.6501047BB Cable OE Retainer Nut - Brushed Bronze 46.9001047BN Cable OE Retainer Nut - Brushed Nickel 8.7501047BS Cable OE Retainer Nut - Biscuit 6.2501047BZ Cable OE Retainer Nut - BZ 8.75

Part

s: L

iste

d by

Num

ber


Parts List Prices, Numerical (Cont.)01047CB Cable OE Retainer Nut - CB 18.4001047CP Cable OE Retainer Nut - CP 3.4501047NP Cable OE Retainer Nut - NP 19.1501047PV Cable OE Retainer Nut - PB 19.1501047WH Cable OE Retainer Nut - WH 6.2501050AP QuickTrim® Strainer Body Cover for CT - AP 30.3001050BB QuickTrim® Strainer Body Cover for CT - BB 59.9001050BN QuickTrim® Strainer Body Cover for CT - BN 12.6501050BS QuickTrim® Strainer Body Cover for CT - BS 10.9501050BZ QuickTrim® Strainer Body Cover for CT - BZ 12.6501050CB QuickTrim® Strainer Body Cover for CT - CB 12.6501050HP QuickTrim® Strainer Body Cover for CT - HP 6.8501050NP QuickTrim® Strainer Body Cover for CT - NP 13.3001050PV QuickTrim® Strainer Body Cover for CT - PB 12.6501050WH QuickTrim® Strainer Body Cover for CT - WH 10.4001050WI QuickTrim® Strainer Body Cover for CT - WI 30.3001052BB Universal NuFit® Grid Body - Brushed Bronze 34.8001052BN Universal NuFit® Grid Body - Brushed Nickel 13.0001052BS Universal NuFit® Grid Body - Biscuit 8.9501052BZ Universal NuFit® Grid Body - Oil Rubbed Bronze 10.4501052CB Universal NuFit® Grid Body - Chrome Brushed 13.9001052HP Universal NuFit® Grid Body - Polished Nickel 5.3001052NP Universal NuFit® Grid Body - Chrome Plated 11.0001052WH Universal NuFit® Grid Body - White 9.4001071 Cable Faceplate Adapter - Thin 1.7001072 Cable Faceplate Adapter - Medium 1.9001073 Cable Faceplate Adapter - Thick 2.1501076 Cable Anti-Theft Device 0.3501077AP Cable OE Retainer Cover - Aged Pewter 21.6501077BB Cable OE Retainer Cover - Brushed Bronze 43.2501077BN Cable OE Retainer Cover - Brushed Nickel 6.7001077BS Cable OE Retainer Cover - Biscuit 3.0001077BZ Cable OE Retainer Cover - Oil Rubbed Bronze 6.7001077CB Cable OE Retainer Cover - Brushed Chrome 16.2001077CP Cable OE Retainer Cover - Chrome Plated 2.7501077NP Cable OE Retainer Cover - Polished Nickel 16.2001077PV Cable OE Retainer Cover - Polished Brass 16.2001077WH Cable OE Retainer Cover - White 3.0001078 WatcoLoc Insert 2.4001079 Cable O-Ring Viton 0.3001080 Cable O-Ring EPDM 0.2001081 Cable Faceplate Screw Guide 0.0510080 Elbow for 515 Direct Drain; Polypropylene 3.7010081 Drain Tee for 515 Direct Drain; Polypropylene 3.2010082 Overflow Elbow for 515 Direct Drain; Polypropylene 3.8010096 Overflow Ell, 2-Hole - Sch 40 ABS 7.2010098 Overflow Ell, 2-Hole - Sch 40 PVC 7.2010121 Watco Strainer Body Removal Tool 20.9510210CP 1-Hole Blank Overflow Plate - Chrome 4.8010210PV 1-Hole BLANK Overflow Plate - Polished Brass 16.0510410CP 2-Hole Blank Overflow Plate, metal - CP 4.8010630CP 3” Screw, Flat-Heat, Unplated 1.3510671 Innovator® Drain Slip Washer 0.3510674 Beveled Sponge Overflow Ell Washer 1.7010675 Overflow Ell Foam Washer 1.7010676 PUSH PULL® Basin Plastic Backing Washer 1.7010678 Black, Soft Rubber OE Washer 1.1010691 Innovator® Drain Seal 0.8010693 Drain Flange Gasket, Perfect Fit 1.2510694 Overflow Flange Gasket - Perfect Fit 1.7010695 Drain Ell Washer - 1.375” 0.9510696 Drain Ell Washer - 1.5” 0.9510697 PUSH PULL® Basin Flat Backing Washer 1.3510700CP TRIP LEVER Overflow Plate Assembly - Chrome 6.5510700BN TRIP LEVER Overflow Plate Assembly - BN 29.1010700BO TRIP LEVER Overflow Plate Assembly - Bone 20.8010700BS TRIP LEVER Overflow Plate Assembly - Biscuit 24.9010700BZ TRIP LEVER Overflow Plate Assembly -BZ 29.10

10700CB TRIP LEVER Overflow Plate Assembly - CB 30.6010700NP TRIP LEVER Overflow Plate Assembly - NP 24.9010700PV TRIP LEVER Overflow Plate Assembly - PB 24.9010700WH TRIP LEVER Overflow Plate Assembly - White 21.0510700WI TRIP LEVER Overflow Plate Assembly - WI 30.6010910 Brass Drop Cylinder for plastic 18.9510920 Trip Lever Clevis for TURNSTYLE® 1.8510930 TRIP LEVER Cotter Pin 0.6010950 Trip Lever QUICK ADJUST® Clevis 2.0510952 TRIP LEVER Linkage Nut 0.6010953 TRIP LEVER Top-Linkage Eye Bolt 1.5010954 5.25” Double-Loop Wire 1.3510960 SLIP LOCK® Clevis with Release Button 6.3510963 SLIP LOCK® Single-Loop Wire 0.9511000 Tubular Tee, ABS 5.1011001 Removable Tailpiece, Tee ABS 7.0011003 Tubular Overflow Ell, ABS 5.3011004 Tubular Overflow Ell Condesate Drain ABS 5.3011005 Drop Cylinder - ABS Plastic 2.7511006 Tubular Drop Cylinder w/ O-Ring ABS 3.8011007 Innovator® Drain Elbow - Long - Sch40 White ABS 7.6011008 Drain Ell - Schedule 40 ABS 4.8511009 Overflow Ell - Sch 40 ABS 4.8511016 Cable Drain Elbow ABS 9.7011017 Tee with Seat, Sch 40 ABS 5.3511018 Drop Cylinder, SL & TS ABS 1.7011019 Tubular Innovator® Overflow Elbow, ABS 4.6511020 Innovator® Overflow Ell - Schedule 40 ABS 4.6511021 Perfect Fit® Overflow Flange - Schedule 40 ABS 4.9011022 Perfect Fit® Drain Flange, 1.5” - Schedule 40 ABS 4.6511023 Elbow (OE & DE) Perfect Fit® - Schedule 40 ABS 4.6511027 Direct Drain Tee, Coarse Thread, Schedule 40 ABS 4.8511028 Drain Ell, Coarse-Thread Tubular, ABS 4.0011029 Cable Overflow Elbow, Schedule 40 ABS, 1-1/2 8.3511030CP PRESFLO® Strainer Body 1.6-14 x 1.25 - Chrome 13.9011030PV PRESFLO® Strainer Body 1.6-14 x 1.25 - PB 26.0511040AP PRESFLO® Lav Strainer Body w/o OF - AP 36.8011040BB PRESFLO® Lav Strainer Body w/o OF - BB 58.0011040BN PRESFLO® Lav Strainer Body w/o OF - BN 21.1511040BZ PRESFLO® Lav Strainer Body w/o OF-BZ 22.2511040CB PRESFLO® Lav Strainer Body w/o OF - CB 22.2511040CP PRESFLO® Lav Strainer Body w/o OF - Chrome 12.6011040NP PRESFLO® Lav Strainer Body w/o OF - NP 21.1511040PN PRESFLO® Lav Strainer Body w/o OF - PN 22.2511040PV PRESFLO® Lav Strainer Bdy w/o OF - PB 21.1511040WI PRESFLO® Lav Strainer Bdy w/o OF - WI 35.8511041AP PRESFLO® Lav Body w/o OF; outside threads - AP 35.0511041BB PRESFLO® Lav Body w/o OF; outside threads - BB 55.2011041BN PRESFLO® Lav Body w/o OF; outside threads - BN 21.1511041BZ PRESFLO® Lav Body w/o OF; outside threads - BZ 22.2511041CB PRESFLO® Lav Body w/o OF; outside threads - CB 22.2511041CP PRESFLO® Lav Body w/o OF; outside threads - CP 12.6511041NP PRESFLO® Lav Body w/o OF; outside threads - NP 21.1511041PN PRESFLO® Lav Body w/o OF; outside threads - PN 22.2511041PV PRESFLO® Lav Body w/o OF; outside threads - PV 21.1511041WI PRESFLO® Lav Body w/o OF; outside threads - WI 35.0511050AP PRESFLO® Lav Strainer Body w/ OF - AP 24.8511050BB PRESFLO® Lav Strainer Body w/ OF - BB 57.2511050BN PRESFLO® Lav Strainer Body w/ OF - BN 22.2511050BZ PRESFLO® Lav Strainer Body w/ OF - BZ 22.2511050CB PRESFLO® Lav Strainer Body w/ OF - CB 21.2011050CP PRESFLO® Lav Strainer Body w/ OF - CP 12.1011050NP PRESFLO® Lav Strainer Body w/ OF - NP 21.1511050PN PRESFLO® Lav Strainer Body w/ OF - PN 22.2511050PV PRESFLO® Lav Strainer Body w/ OF - PB 21.1511050WI PRESFLO® Lav Strainer Body w/ OF - WI 25.9011060AP PRESFLO® Strainer Body 1.5” - 11.5 - AP 40.8011060BB PRESFLO® Strainer Body 1.5” - 11.5 - BB 62.60

11060BN PRESFLO® Strainer Body 1.5” - 11.5 - BN 26.0511060BZ PRESFLO® Strainer Body 1.5” - 11.5 - BZ 27.3511060CB PRESFLO® Strainer Body 1.5” - 11.5 - CB 27.3511060CP PRESFLO® Strainer Body 1.5” x 11.5 - Chrome 13.9011060NP PRESFLO® Strainer Body 1.5” - 11.5 - NP 26.0511060PN PRESFLO® Strainer Body 1.5” - 11.5 - PN 27.3511060PV PRESFLO® Strainer Body 1.5” - 11.5 - PV 26.0511060WI PRESFLO® Strainer Body 1.5” - 11.5 - WI 38.8511070AP PRESFLO® Strainer Body 1.625”-16 - AP 36.6011070BB PRESFLO® Strainer Body 1.625”-16 - BB 65.2011070BN PRESFLO® Strainer Body 1.625”-16 - BN 27.2011070BZ PRESFLO® Strainer Body 1.625”-16 - BZ 27.2011070CB PRESFLO® Strainer Body 1.625”-16 - CB 25.9011070CP PRESFLO® Strainer Body - 1.625” -16 - Chrome 14.6011070NP PRESFLO® Strainer Body 1.625”-16 - NP 25.9011070PN PRESFLO® Strainer Body 1.625”-16 - PN 27.2011070PV PRESFLO® Strainer Body 1.625”-16 - PV 25.9011070WI PRESFLO® Strainer Body 1.625”-16 - Wrought Iron 36.6011078 LIFT & TURN NuFit® D- Pin 1.4511079 D Post, LIFT & TURN only 1.9511088 D Ring, LIFT & TURN only 0.5511095 Drop Cylinder “O” Ring # -215 0.6011111-SET Keychain Color Sample Set 34.8011114 Innovator® Overflow Ell Test Cap 1.3011121 ABS Retainer Star Nut for Innovator® 1.7011131 PRESFLO® O-Ring Seal for 1.625”-16 Stopper 0.7011132 PRESFLO® O-Ring Seal for 1.865”-11.5 Stopper 0.7011134 Cable O-Ring: AS 568A-204 0.2511136 QuickTrim® O-Ring Seal , thin 0.3011138 QuickTrim® O-Ring Seal , thick 0.4511140CP PRESFLO® Metal Stopper 1.865”-11.5, brass - CP 10.0511140PV PRESFLO® Metal Stopper 1.865”-11.5, brass - PV 17.5011145AP PRESFLO® Plastic Stopper 1.865”-11.5, brass - AP 16.5011145BB PRESFLO® Plastic Stopper 1.865”-11.5, brass - BB 43.5011145BN PRESFLO® Plastic Stopper 1.865”-11.5, brass - BN 14.1511145BZ PRESFLO® Plastic Stopper 1.865”-11.5, brass - BZ 14.1511145CB PRESFLO® Plastic Stopper 1.865”-11.5, brass - CB 14.1511145CP PRESFLO® Plastic Stopper 1.865”-11.5, brass - CP 4.6511145NP PRESFLO® Plastic Stopper 1.865”-11.5, brass - NP 13.4511145PN PRESFLO® Plastic Stopper 1.865”-11.5, brass - PN 13.5011145PV PRESFLO® Plastic Stopper 1.865”-11.5, brass - PV 13.4511145WI PRESFLO® Plastic Stopper 1.865”-11.5, brass - WI 15.7011150AP PRESFLO® Stopper 1.625”-16, metal - AP 22.9011150BB PRESFLO® Stopper 1.625”-16, metal - BB 38.7011150BN PRESFLO® Stopper 1.625”-16, brass - BN 14.4011150BZ PRESFLO® Stopper 1.625”-16, brass - BZ 15.1511150CB PRESFLO® Stopper 1.625”-16, brass - CB 15.1511150CP PRESFLO® Stopper 1.625”-16, metal - CP 9.6511150NP PRESFLO® Stopper 1.625”-16, brass - NP 14.4011150PN PRESFLO® Stopper 1.625”-16, brass - PN 15.1511150PV PRESFLO® Stopper 1.625”-16, brass - WI 14.4011150WI PRESFLO® Stopper 1.625”-16, brass - PB 22.9011155AP PRESFLO® Stopper, plastic 1.625-16 - AP 18.2011155BB PRESFLO® Stopper, plastic 1.625-16 - BB 40.6511155BN PRESFLO® Stopper, plastic 1.625-16 - BN 16.7011155BZ PRESFLO® Stopper plastic 1.625-16 - BZ 16.7011155CB PRESFLO® Stopper, plastic 1.625-16 - CB 16.7011155CP PRESFLO® Stopper, plastic 1.625-16 - CP 4.9011155NP PRESFLO® Stopper, plastic 1.625-16 - NP 15.9011155PN PRESFLO® Stopper, plastic 1.625-16 - PN 16.7011155PV PRESFLO® Stopper, plastic 1.625-16 - PB 15.9011155WI PRESFLO® Stopper, plastic 1.625-16 - WI 18.2011290CP PP Stopper, Plastic - CP 2.6011290WH PP Stopper, Plastic - White 2.0511291CP Universal NuFit Stopper - CP 2.3511307BB Plastic Push Pull Knob BB 15.6011307BN Plastic Push Pull knob BN 3.8011307BS Plastic Push Pull knob BS 1.05

Parts: Listed by Num

ber


Parts List Prices, Numerical (Cont.)11307BZ Plastic Push Pull knob BZ 3.6011307CP Plastic Push Pull knob CP 1.2511307NP Plastic Push Pull knob NP 3.8011307WH PUSH PULL® Knob - Plastic - White 1.2011360CP Strainer Body 1.865” x 11.5, 3.05 Flange - CP 17.2511360PV Strainer Body 1.865” x 11.5, 3.05 Flange - PB 23.9011370CP Strainer Body, 1.625-in x 16, 3.05 Flange - CP 17.2511370PV Strainer Body, 1.625-in x 16, 3.05 Flange - PB 23.9011380CP Strainer Body, 1.625-in x 14, 3.05 Flange - CP 17.2511380PV Strainer Body, 1.625-in x 14, 3.05 Flange - PB 23.9011420CP PP & LT Strainer Body, 1.749” x 12 (Gopher) - CP 14.1011430CP PUSH PULL® Basin Strainer Body, brass - Chrome 10.8511431CP PP Basin Body w/o Overflow - Chrome 12.0511432CP PUSH PULL® Basin Body, brass; no OF; w O.D.-CP 11.1011480 Innovator® Drain Retainer Nut, PVC 1.9511490CP TRIP LEVER Zinc Str. Body, 1.625” x 16-CP only 8.9511492CP LT/FA Strainer Body, 1.865” x 11.5 (Zinc) 3/8”-CP 7.6011494CP PUSH PULL® Strainer Body, 1 11/16” x 16 x 1in-CP 9.1011495CP TL Strainer Body, Zinc 1.865” x 11.5 - Chrome 6.2511504 PP Friction Ring, Small Gap 0.4511505 Friction Ring, PUSH PULL® only 0.4511507 Seal, PP & LT - 1 1/16” Dia. 1.1511509 Basin Wedge Seal, PUSH PULL® 0.9511510 Post & Friction Ring, 3/8”, PUSH PULL® only 2.5011511 Post & Friction Ring, 5/16”, PUSH PULL® only 2.8511515 11512 Plas. Pin & 11504 PP Friction Ring-Small Gap 1.0011519 FOOT ACTUATED Seal 0.7511520 Univ. NuFit 11537 Plastic Pin & 11529 Friction Ring 1.1511526 Innovator Cable® Stopper Seal - 1-1/16 In. 0.8511527 Universal NuFit Seal 0.6011529 Universal NuFit Friction Ring 0.3511530 Retainer Plate 1.1511531 Retainer Plate for 2-Hole Schedule 40 1.2511532 PUSH PULL® Pin, Brass, 3/8” - 16 2.1011533 Chicago Alignment Plate 1.0511536 PUSH PULL® Pin 5/16” x 18 2.6511537 Universal NuFit PP Pin Plastic 0.5511540 Retainer Plate Screw 0.8011547 Threaded Adapter Pin - 3/8-5/16 - Brass 4.2011551 Threaded Adapter Pin - #10-24 - Brass 4.2011554 Threaded Adapter Pin - 1/4-20 - Brass 4.2011573 6-in Dial Calipers, 4-way measurement 48.1511574 Set of Steel Thread Gauges 4-84 threads 24.1011575 Green Test Plug with O-Ring-Type Washer 2.5011580 Slip Joint Nut - Black 1.5” 0.7011581 Slip Joint Nut - White 1.5” 0.7011583 Slip Joint Poly Washer 1.5” 0.6011607 Hub - Schedule 40 PVC 6.8011608 Hub - Schedule 40 ABS 7.0511610 Spigot - Schedule 40 PVC only 6.6511613 14-Inch Tube Extension, ABS Tubular Plastic 3.8011614 14-Inch Tube Extension, PVC Tubular Plastic 3.8011619 6.5-in Double-Loop Wire 1.3511620 Double-Loop Wire - 7 1/2-in 2.6511621 Double-Loop Wire - 9 1/2-in 2.6511622 Double-Loop Wire - 10 1/2” 2.8011623 Double-Loop Wire - 11.375” 2.8011624 Double-Loop Wire - 13 1/2” 3.6011641 Adapter Bar, Aluminum 1.5514000 Tubular Tee, PVC 5.1014001 Removable Tailpiece, Tee PVC 7.0014003 Tubular Overflow Ell, PVC 5.3014004 Tubular Overflow Ell Condensate Drain, PVC 5.3014005 Drop Cylinder - PVC Plastic 2.7514006 Tubular Drop Cylinder w/ O-Ring PVC 3.8014007 Innovator® Drain Elbow - Long - Sch40 PVC 8.3014008 Drain Elbow - Schedule 40, PVC 4.8514009 Overflow Ell - Schedule 40, PVC 4.85

14010 Sanitary Tee, Schedule 40, PVC 5.1014011 Sanitary Tee, Schedule 40, ABS 5.1014012 Overflow Ell Condensate Drain, Schedule 40, PVC 5.6514013 Innovator® Drain Crossbars, PVC 1.7514016 Cable Drain Elbow, Schedule 40 PVC, 1-1.2” 9.3514017 Tee with Seat, Schedule 40 PVC 5.3514019 Tubular Innovator® Overflow Ell, PVC 4.9014020 Innovator® Overflow Ell - Schedule 40 PVC 4.6514021 Perfect Fit Overflow Flange - Schedule 40 PVC 4.9014022 Perfect Fit Drain Flange, 1.5” - Schedule 40 PVC 4.9014023 Elbow (OE & DE) Perfect Fit - Schedule 40 PVC 4.6514027 Direct Drain Tee, Schedule 40 PVC CT 5.1014028 Drain Ell, Coarse-Thread Tubular, PVC 4.0014029 Cable Overflow Elbow, Schedule 40 PVC, 1-1/2 8.0020020BN TURNSTYLE® Overflow Mount w/Prongs - BN 22.2520020BO TURNSTYLE® Overflow Mount w/Prongs - BO 10.3020020BS TURNSTYLE® Overflow Mount w/Prongs - BS 10.3020020BZ TURNSTYLE® Overflow Mount w/Prongs - BZ 22.2520020CB TURNSTYLE® Overflow Mount w/Prongs - CB 22.2520020CP TURNSTYLE® Overflow Mount w/Prongs - CP 8.0020020NP TURNSTYLE® Overflow Mount w/Prongs - NP 21.1520020PN TURNSTYLE® Overflow Mount w/Prongs - PN 34.3520020PV TURNSTYLE® Overflow Mount w/Prongs - PB 22.2520020WH TURNSTYLE® Overflow Mount w/Prongs - WH 10.3020020WI TURNSTYLE® Overflow Mount w/Prongs - WI 27.1020030BN Cable Overflow Plate - Brushed Nickel 39.7520030BO Cable Overflow Plate - Bone 22.8020030BS Cable Overflow Plate - Biscuit 22.8020030BZ Cable Overflow Plate - Oil-Rubbed Bronze 39.7520030CB Cable Overflow Plate - Chrome Brushed 39.7520030CP Cable Overflow Plate - Chrome 15.3520030NP Cable Overflow Plate - Nickel Polished 39.7520030PV Cable Overflow Plate - Polished Brass 39.7520030WH Cable Overflow Plate - White 23.9520030WI Cable Overflow Plate - Wrought Iron 42.6520035 Cable Overflow Ell Assembly 22.8020040 Cable Drain Ell Lock Pin 1.9020065BN Cable Full-Cover Stopper - Brushed Nickel 37.3520065BO Cable Full-Cover Stopper - Bone 21.1520065BS Cable Full-Cover Stopper - Biscuit 21.1520065BZ Cable Full-Cover Stopper - Oil-Rubbed Bronze 37.5520065CB Cable Full-Cover Stopper - Brushed Chrome 37.3520065CP Cable Full-Cover Metal Stopper - Chrome 17.2520065NP Cable Full-Cover Stopper - Nickel Polished 37.3520065PV Cable Full-Cover Stopper - Polished Brass 39.2520065WH Cable Full-Cover Stopper - White 21.1520065WI Cable Full-Cover Stopper - Wrought Iron 38.6020067BB Cable Stopper Top - BB 46.5520067BN Cable Stopper Top - BN 8.0520067BO Cable Stopper Top - BO 8.0520067BS Cable Stopper Top - BS 7.6520067BZ Cable Stopper Top - BZ 8.0520067CB Cable Stopper Top - CB 8.0520067CP Cable Stopper Top - CP 3.0020067NP Cable Stopper Top - NP 8.0520067PV Cable Stopper Top - PV 8.0520067WH Cable Stopper Top - WH 7.6520068 Cable Stopper Shaft 3.2020069 Cable Stopper Screw #6x3/4 Fillister MS 0.5520072 Cable Stopper Spring 0.6020080BN Cable Strainer Body - Brushed Nickel 22.2520080BO Cable Strainer Body - Bone 14.6520080BS Cable Strainer Body - Biscuit 14.6520080BZ Cable Strainer Body - Oil-Rubbed Bronze 22.2520080CB Cable Strainer Body - Brushed Chrome 22.2520080CP Cable Strainer Body - Chrome Plated 9.4520080NP Cable Strainer Body - Nickle Plated 14.6520080PV Cable Strainer Body - Polished Brass 14.65

20080WH Cable Strainer Body - White 14.6520080WI Cable Strainer Body - Wrought Iron 33.4020085 Cable Drain Ell Assembly 27.3520100 Cable Overflow Ell Gasket 2.4520110 Cable Stopper Adjustment Screw 1.8020120 Cable Stopper Adjustment Nut 1.8020122 Nut for Cable Wire 0.5020130 Cable DE Washer 1.7020140 Cable Overflow Plate Locking Screw 1.9020145 Cable Drive Shaft 1.2020146 Cable Retainer 1.0520147 Cable Core Guide 2.4520151 Cable Core 0.3520156 21-In. Sheath W/brass Threads for Cable Bathwaste 7.0020158 Innovator Cable Core Barrel 1.2020160 31-In. Sheath w/Brass Threads for Cable Bathwaste 7.1038100BUSH Bushing Board with Bushings #38101-thru-#38116 214.5038410CP FOOT ACTUATED Stopper - 5/16 Pin, Chrome 8.3538412BN FOOT ACTUATED ABS Stopper-3/8 pin - BN 23.2038412BZ Foot Actuated ABS Stopper-3/8 pin - BZ 23.2038412CB Foot Actuated ABS Stopper-3/8 pin - CB 29.7538412CP FOOT ACTUATED ABS Stopper-3/8 pin - Chrome 8.3538412NP FOOT ACTUATED ABS Stopper-3/8 pin - NP 23.2038412PV FOOT ACTUATED ABS Stopper-3/8 pin - Pol. Brass 22.5040675 Overflow Ell Washer for Brass Bath Waste 1.8041005 Brass Drop Cylinder for Brass 7.2041021 Sliptube, 17g Brass, 1.508 I.D. x 3-in. 5.6041029BN Brass Lav Drop Tube 7-in. - Brushed Nickel 46.8541029BZ Brass Lav Drop Tube 7-in. - Oil-Rubbed Bronze 46.8541029CB Brass Lav Drop Tube 7-in. - Chrome Brushed 39.9041029CP Brass Lav Drop Tube 7-in. - CP 14.3041029NP Brass Lav Drop Tube 7-in. - Polished Nickel 39.9041029PV Brass Lav Drop Tube 7-in. - Polished Brass 46.8541029PN Brass Lav Drop Tube 7-in. - Pearl Nickel 41.9041037BN 12” Brass Lav Drain Tube - BN 73.2041037BZ 12” Brass Lav Drain Tube - BZ 73.2041037CB 12” Brass Lav Drain Tube - CB 53.3041037CP 12” Brass Lav Drain Tube - CP 21.1541037NP 12” Brass Lav Drain Tube - NP 73.2041037PV 12” Brass Lav Drain Tube - PB 73.2041037PN 12” Brass Lav Drain Tube - PN 76.9041040 Chicago Overflow Tube - 12 in. 22.8541041 Chicago Overflow Tube - 17 in. 29.3541540 Brass Screw for Brass Retainer Plate 0.6041580 Brass Slip Nut 2.3041582 Brass Half Ferrule, 1-1/2 in. 3.6041583 Brass Ferrule 2.4541585 Basin PP Zinc Wedge Nut 1.7044001 Brass Tee for TRIP LEVER 20.9044002 Brass Drain Ell - 1.625 in. - 16 8.6544003 Brass Overflow Ell 10.0544004 Brass Overflow Ell with Condensate Drain 16.7044005 Brass Overflow Ell for Innovator 19.9544006 Brass Drain Ell, 1.5 in. - 11.5 12.1044007 Brass Direct Drain with Internal Threads 10.3044010 Brass Direct Drain Tee with Internal Threads 46.2044011 Brass Elbow for Direct Drain 22.3544012 Brass Lay-Down Tee 37.2044013 Chicago Overflow Flange 6.6596039 PRESFLO Suction Cup 1.5-in. 0.7096057 New Silicone Pouch 4.8596067 Double-Sided Adhesive Ring for NuFit 4.7096068 Double-Sided Adhesive Ring for NuFit Grid Body 4.7017GA-__ 17 Gauge Brass Tubing per inch 1.7520-GA-__ 20 Gauge Brass Tubing per inch 1.65SCHABS- Schedule 40 ABS Tubing per inch 0.45SCHPVC- Schedule 40 PVC Tubing per inch 0.35SA01010 Finish Display Board 77.80U80256 Union Tee with Seat 15.90

Part

s: L

iste

d by

Num

ber


Parts: Listed by Category

11134 ......... Cable O-Ring: AS 568A-204 ....................................................11507 ......... Stopper Seal, 1-1/16” dia ..........................................................11583 ......... Slip Joint Polywasher 1.5” ........................................................20020CP ... TURNSTYLE® Overflow Mount - Chrome ...............................20030CP ... Cable Overflow Plate - Chrome ................................................20035 ........ Cable Overflow Elbow Assembly with 20041 Turning Pin ........20040 ........ Cable Drain Elbow Lock Pin .....................................................20065CP ... Stopper w/20110 screw & 20120 nut - Chrome ........................20080CP ... Cable Strainer Body - Chrome .................................................20085 ........ Cable Drain Elbow Assembly ...................................................

01016CP .... PP/LT Strainer Body, Brass, 1.865”-11.5x1.25” - Chrome ........01019CP .... Innovator® Cable Faceplate - Chrome Plated ..........................01032CP .... Cable Faceplate Screw, 1/4-20x1-3/4”, with Screw Guide .......01036 ......... Cable Retainer-to-Overflow Screw ...........................................01037 ......... Cable Adapter-to-Drive Shaft Screw ........................................01047CP .... Cable Overflow Elbow Retainer Nut - Chrome Plated .............01071 ......... Cable Faceplate Adapter - Thin ................................................01072 ......... Cable Faceplate Adapter - Medium ..........................................01073 ......... Cable Faceplate Adapter - Thick ..............................................01076 ......... Cable Theft-Resistant Device ...................................................01077CP .... Cable Overflow Elbow Retainer Nut Cover - Chrome Plated ...01078 ......... WatcoLoc Insert ........................................................................01079 ......... Cable Quick-Connect O-Ring Vitron M2 5x7 ...........................01080 ......... Cable Quick-Connect O-Ring EPDM M2 5x7 ..........................01081 ......... Cable Screw Guide ...................................................................10675 ......... Overflow Elbow Gasket, Foam .................................................10694 ........ Overflow Flange Gasket, Foam Rubber (Perfect Fit®) ............10696 ........ Drain Elbow Gasket, 1.5”, Coarse Thread, gray .......................

10671 ......... Innovator® Drain Elbow Slip Washer ........................................10674 ......... Beveled Sponge Overflow Elbow Washer ................................10675 ......... Overflow Ell Washer, Foam ......................................................10676 ......... Basin Plastic Backing Washer ..................................................10678 ......... Black, Soft Rubber Overflow Elbow Gasket .............................10691 ......... Innovator® Drain Rubber Seal ..................................................10693......... Drain Flange Gasket, Rubber, Perfect Fit ................................10694 ........ Overflow Elbow Flange Gasket, Half Height ............................10695 ........ Drain Elbow Washer 1.375”, Fine Thread, Black ......................

01003CP .... 2-Hole Overflow Plate, Metal ....................................................01024CP .... Overflow Plate Screw, 2.25” .....................................................10675 ......... Overflow Elbow Gasket - Foam ................................................10696 ........ Drain Elbow Washer, 1.5”, Gray, Coarse Thread .....................11530 ......... Retainer Plate ...........................................................................11533 ......... Chicago Alignment Plate ..........................................................11583 ......... Slip Joint Polywasher 1.5” ........................................................17GA-__ .... Brass Pipe - 17 Gauge (specify length) ........................per inch20GA-__ .... Brass Pipe - 20 Gauge (specify length) ........................per inch40675 ......... Overflow Elbow Washer for Brass Bath Waste ........................41005 ......... Brass Drop Cylinder for Brass ..................................................41021 ......... Sliptube, 17g Brass, 1.508 I.D. x 3 in. ......................................41040 ......... Chicago Overflow Tube 12” ......................................................41041 ......... Chicago Overflow Tube 17” ......................................................41540 ......... Brass Screw for Retainer Plate for Brass .................................

See previous list of Part Numbers for other finishes available for items indicated with a CP finish.m

Parts List Prices, By Category

4.252.151.700.951.151.050.601.751.651.807.205.60

22.8529.35

0.60

2.303.602.45

20.908.65

10.0516.7019.9512.1010.3046.2022.3537.206.65

15.90

0.251.150.608.00

15.3522.80

1.9017.259.45

27.35

2.451.801.800.501.701.907.007.102.30

20.90

0.351.701.701.701.100.801.251.700.95

0.951.351.150.950.800.850.601.80

10.458.601.350.550.403.451.701.902.150.352.752.400.300.200.051.701.700.95

11016 ......... Cable Drain Elbow, Schedule 40 ABS, 1-1/2” ..........................11029 ......... Cable Overflow Elbow, Schedule 40 ABS ................................11526 ......... Cable Stopper Seal...................................................................11575 ......... Green Test Plug with O-Ring-type Gasket Assembly ..............14010 ......... Sanitary Tee, Schedule 40 PVC, 1-1/2” ....................................14011 ......... Sanitary Tee, Schedule 40 ABS, 1-1/2” ....................................14016 ......... Cable Drain Elbow, Schedule 40 PVC .....................................14029 ......... Cable Overflow Elbow, Schedule 40 PVC ................................20067CP.... Cable Stopper - Chrome Plated ...............................................20068 ........ Cable Stopper Shaft .................................................................20069 ........ Stopper Adjusting Screw ..........................................................20072 ......... Cable Stopper Spring ...............................................................20145 ......... Cable Drive Shaft .....................................................................20146 ......... Cable Retainer ..........................................................................20147 ......... Cable Core Guide .....................................................................20151 ......... Cable Core ................................................................................20158 ......... Cable Core Anchor Barrel ........................................................

20100 ......... Cable Overflow Elbow Gasket ..................................................20110 ......... Cable Stopper Adjustment Screw (Brass Cable)......................20120 ......... Cable Stopper Adjustment Nut (Brass Cable) ..........................20122 ......... Nut for Cable Wire .................................................................... 20130 ......... Cable Drain Elbow Washer .......................................................20140 ......... Cable Overflow Plate Locking Screw .......................................20156 ......... 22.125” Sheath with Brass Threads for Cable Assembly .........20160 ......... 31” Sheath with Brass Threads for Cable Assembly ................41580 ......... Brass Slip Nut ...........................................................................44001 ........ Brass Tee with Seat ..................................................................

41580 ......... Brass Slip Nut ...........................................................................41582 ......... Brass Half Ferrule (2 usually required)..............................each41583 ......... Brass Ferrule (2 usually required) .....................................each44001 ........ Brass Tee with Seat ..................................................................44002 ........ Brass Drain Elbow, 1.625-16, Fine Thread ...............................44003 ........ Brass Overflow Elbow ..............................................................44004 ........ Brass Overflow Elbow with Condensate Drain .........................44005 ........ Brass Innovator® Overflow Elbow ............................................44006 ........ Brass Drain Elbow, 1.865-11.5, Coarse Thread .......................44007 ........ Brass Direct Drain with Internal Threads .................................44010 ......... Brass Direct Drain Tee with Internal Threads ..........................44011 ......... Brass Elbow for Direct Drains ..................................................44012 ......... Brass Lay-Down Tee (New York Tee) .......................................44013 ......... Chicago-Code Overflow Flange ...............................................U80256 ...... Brass Tee for Slip ‘N Solder bath wastes .................................

10696 ........ Drain Elbow Gasket, 1.90” I.D., 2.75” O.D., Gray .....................10697 ......... Basin PP Flat Backing Washer .................................................11507 ......... Stopper Seal, 1-1/16” dia. .........................................................11509 ......... Basin PF/PP Wedge Seal .........................................................11519 ......... Foot Actuated Seal ...................................................................11526 ......... Cable Stopper Seal, 1-1/16” .....................................................11527 ......... Universal NuFit® Seal ...............................................................40675 ......... Overflow Elbow Washer for Brass ............................................

528/538 BRASS CABLE - NON-TESTABLE

INNOVATOR® CABLE - TESTABLE

BRASS PARTS & FITTINGS

CABLE BATH WASTES PARTS & FITTINGS

GASKETS - SEALS - WASHERS

9.708.350.852.505.105.109.358.003.003.200.550.601.201.052.450.351.20


01010CP .... Knob, Brass ..............................................................................01013CP .... Stopper, Brass ..........................................................................10676 ......... Basin (700-PP) Push Pull® Plastic Backing Washer ................11290CP .... (700-PP) Push Pull® Stopper, ABS Plastic - Chrome Plated ...11430CP .... Basin PP Strainer Body, OF, 1.26-18x1.35 - CP ......................11431CP .... Basin PP Strainer Body, no OF, 1.26-18x1.35 - CP. .................11432CP .... Basin PP Strainer Body, no OF, O.D. Threads .........................11507 ......... Stopper Seal, 1-1/16” dia.. ........................................................11510 ......... PP 3/8” Pin (11532) and Friction Ring (11505). ........................

11040CP .... PresFlo® Lav Strainer Body, no OF, 1.26-18x1.35 - CP ...........11041CP .... PresFlo® Lav Strainer Body, no OF, O.D. Threads - CP ..........11050CP .... PresFlo® Lav Strainer Body, w/OF, 1.26-18x1.35 - CP .............11131 ......... O”-Ring PresFlo® Seal FT ........................................................11150CP .... PresFlo® Stopper-Brass, Basin - Chrome (also order 11131) ...96039 ........ PresFlo®Suction Cup, 1.5” (for removing PresFlo® stopper) ...

01001CP .... W-Overflow Plate, Plastic - Chrome Plated .............................01002CP .... 1-Hole Overflow Plate, Metal - Chrome Plated ........................01003CP .... 2-Hole Overflow Plate, Metal - Chrome Plated ........................01004CP .... Overflow Plate, Innovator® - Chrome Plated ...........................01019CP .... Cable (Testable) Overflow Plate - Chrome Plated ...................01024CP .... 2.25” Overflow Plate Screw, Brass - Chrome Plated ...............01026 ......... Thumb Screw (600 TK), 1/4-20x1.5” ........................................01030CP .... 3-3/4”” Overflow Plate Screw, Stainless Steel - Chrome .........

01022CP .... PP/LT Strainer Body, 1.625”-16-1.25” - Chrome Plated............10675 ......... Overflow Elbow Gasket, 2-1/4 I.D., 3-1/2 O.D., 5/8” Foam .......10693......... Perfect Fit® Drain Flange Gasket, Rubber ...............................10694 ........ Perfect Fit® Overflow Flange Gasket, Foam Rubber ................11021 ......... Perfect Fit® Overflow Flange, Schedule 40 ABS ......................11022 ......... Perfect Fit® Drain Flange, Schedule 40 ABS ..........................

PRESFLO® LAVATORY DRAINSLAVATORY DRAINS PARTS & FITTINGS

PUSH PULL® LAVATORY DRAINS

10697 ......... Basin PF/PP Flat Backing Washer ...........................................11509 ......... Basin PF/PP Wedge Seal .........................................................41029CP .... Basin Drop Tube 7-in - Chrome Plated .....................................

OVERFLOW PLATES & SCREWS01031CP .... 4” Faceplate Screw, Brass - Chrome Plated ...........................01032CP .... Cable Faceplate Screw (also order #01081).............................10210CP .... 1-Hole Overflow Plate, Metal, Blank - Chrome Plated. ...........10410CP .... 2-Hole Overflow Plate, Metal, Blank - Chrome Plated.. ..........10630CP ... 3” Screw, Flat Head, Chrome-Plated. .....................................20030CP ... Cable (528/538) Overflow Plate - Chrome Plated.. .................20140 ......... Cable Overflow Plate Locking Screw ......................................

PERFECT FIT® – 400 SERIES PARTS & FITTINGS11023 ......... Perfect Fit® Pancake 90O Elbows (OE and DE), Sc.40 ABS ....14010 ......... Sanitary Tee - Sch 40 PVC.......................................................14011 ......... Sanitary Tee - Sch 40 ABS.......................................................14021 ......... Perfect Fit® Overflow Flange, Schedule 40 PVC ....................14022 ......... Perfect Fit® Drain Flange, 1.5”, Schedule 40 PVC ..................14023 ......... Perfect Fit® Pancake 90O Elbows (OE & DE), Sch. 40 PVC ..

OTHER LAVATORY PARTS


01004WH ... Overflow Plate, Innovator® - White ...........................................10671 ......... Innovator® Drain Elbow Slip Washer ........................................10675 ......... Overflow Elbow Gasket, 2-1/4 I.D., 3-1/2 O.D., 5/8” Foam .......10691 ......... Innovator® Drain Elbow Rubber Seal ........................................11007 ......... Innovator® Drain Elbow-Long - White ABS ..............................11019 ......... Innovator® Overflow Elbow, Tubular - ABS...............................11020 ......... Innovator® Overflow Elbow - Schedule 40 ABS .......................11121 ......... Retainer Star Nut for Innovator® ...............................................11290WH ... Plastic Stopper - White .............................................................11307WH ... Plastic Knob - White .................................................................

INNOVATOR® DRAIN SERIES PARTS & FITTINGS11480 ......... Innovator® Drain Elbow Retainer Nut. ......................................11507 ......... Stopper Seal, 1-1/16” ................................................................11515 ......... Plastic Pin, 3/8” (11512) & Small Gap Friction Ring (11504) ....14007 ......... Innovator® Drain Elbow-Long - PVC. ........................................14010 ......... Sanitary Tee - Schedule 40 PVC ..............................................14011 ......... Sanitary Tee - Schedule 40 ABS ..............................................14013 ......... Innovator® Drain Crossbar, removable .....................................14020 ......... Innovator® Overflow Elbow - Schedule 40 PVC .......................14027 ......... Direct Drain Tee - Coarse Thread - Schedule 40 PVC ............

41037CP .... Basin Brass Drop Tube 12-in - Chrome Plated .......................41585 ......... Basin PF/PP Zinc Wedge Nut ..................................................

01001CP .... W-Overflow Plate - Chrome Plated ..........................................01004CP .... Overflow Plate, Innovator® - Chrome Plated ...........................10675 ......... Overflow Elbow Gasket, 2-1/4 I.D., 3-1/2 O.D., 5/8” Foam .......10696 ........ Drain Elbow Gasket, 1.90 I.D., 2.75 O.D. - Gray ......................11008 ......... Drain Elbow, Schedule 40 ABS ................................................11019 ......... Innovator® Overflow Elbow, Tubular Plastic, ABS ...................11020 ......... Innovator® Overflow Elbow, Schedule 40 ABS........................11027 ......... Direct Drain Tee, Schedule 40 ABS .........................................11114 .......... O-Ring-type Test Cap Assembly for Innovator® Overflow ......11121 ......... ABS Retainer Star Nut for Innovator® .....................................

INNOVATOR® – 900 SERIES PARTS & FITTINGS

11507 ......... Stopper Seal, 1-1/16” ................................................................11575 ......... Green Test Plug with O-Ring-type Gasket Assembly ..............14008......... Drain Elbow, Schedule 40 PVC ................................................14010 ......... Sanitary Tee, Schedule 40 PVC ...............................................14011 ......... Sanitary Tee, Schedule 40 ABS ...............................................14019 ......... Innovator® Overflow Elbow, Tubular, PVC ...............................14020 ......... Innovator® Overflow Elbow, Schedule 40, PVC ......................14027 ......... Direct Drain Tee, Schedule 40 PVC .........................................44005 ........ Brass Overflow Elbow for Brass Innovator® Series.................

Part

s: L

iste

d by

Cat

egor

y Parts List Prices, By Category (Cont.)

52.803.401.700.954.854.654.654.851.301.70

1.152.504.855.105.104.904.655.10

19.95

12.150.351.700.807.604.654.651.702.051.20

1.951.151.008.305.105.101.754.655.10

12.6012.6512.100.709.650.70

2.4511.30

1.702.60

10.8512.0511.101.152.50

1.350.95

14.30

21.151.70

52.804.254.253.408.602.150.702.75

3.901.354.804.801.35

15.351.90

10.251.701.251.704.904.65

4.655.105.104.904.904.65


Parts: Listed by Category

10096 ........ Overflow Elbow- 2-Hole - Schedule 40 ABS ............................10098 ........ Overflow Elbow- 2-Hole - Schedule 40 PVC ............................10674 ......... Beveled Sponge Overflow Elbow Gasket .................................11008 ......... Drain Elbow - Schedule 40 ABS ...............................................11009 ......... Overflow Elbow- 1-Hole - Schedule 40 ABS ............................11017 ......... Tee with Seat - Schedule 40 ABS ............................................11020 ......... Innovator® Overflow Elbow - Schedule 40 ABS .......................11027 ......... Direct Drain Tee - Schedule 40 ABS ........................................11531 ......... Retainer Plate for 2-Hole Schedule 40 .....................................11540 ......... Retainer Plate Screw ................................................................11575 ......... Green Test Plug with O-Ring-type Gasket Assembly ..............11607 ......... Hub Adapter - Schedule 40 PVC ..............................................

SCHEDULE 40 PIPE & FITTINGS

11608 ......... Hub Adapter - Schedule 40 ABS ..............................................11610 ......... Spigot Adapter - Schedule 40 PVC ..........................................14008......... Drain Elbow - Schedule 40 PVC ...............................................14009......... Overflow Elbow- 1-Hole - Schedule 40 PVC ............................14010 ......... Sanitary Tee - Schedule 40 PVC ..............................................14011 ......... Sanitary Tee - Schedule 40 ABS ..............................................14012 ......... Overflow Elbow Condensate Drain, Schedule 40 PVC ............14017 ......... Tee with Seat - Schedule 40 PVC ............................................14020 ......... Innovator® Overflow Elbow - Schedule 40 PVC ....................... 14027 ......... Direct Drain Tee - Schedule 40 PVC ........................................SCHABS-__ Schedule 40 ABS Pipe (specifly length in inches) ...per inchSCHPVC-__ Schedule 40 PVC Pipe (specifly length in inches) ...per inch

TRIP LEVER & TURNSTYLE BATH WASTE PARTS & FITTINGS01006CP .... Dome Strainer Cover Plate - Chrome. ......................................01040CP .... Strainer Cover Plate Screw - Chrome ......................................10700CP .... Trip Lever Faceplate Assembly - Chrome Plated .....................10910 ......... Brass Drop Cylinder for Plastic ................................................10920 ......... Trip Lever Clevis for TURNSTYLE® .......................................10930......... Trip Lever Cotter Pin .................................................................10950......... Trip Lever Quick Adjust® Clevis ...............................................10952 ......... Trip Lever Linkage Nut ..............................................................10953......... Trip Lever Top-Linkage Eye Bolt ..............................................10954 ........ Double-Loop Wire, 5.25” ..........................................................10960 ........ SLIP LOCK® Clevis with Head Assembly ................................10963 ........ SLIP LOCK® Single-Loop Wire ................................................ 11000 ......... Tee, Tubular ABS ......................................................................11001 ......... Removable Tailpiece Tee, Tubular ABS ...................................11005 ......... Drop Cylinder, Tubular ABS ......................................................11006 ......... Drop Cylinder with O-Ring, Tubular ABS .................................11017 ......... Tee with Seat, Schedule 40 ABS .............................................11018 ......... Drop Cylinder, SL and TS, ABS ...............................................11095 ......... Drop Cylinder O-Ring ...............................................................11490CP .... Trip Lever Strainer Body, Zinc, 1.625”-16-1.25” - Chrome .......

11495CP .... Trip Lever Strainer Body, Zinc, 1.865”-11.5-1.25” - Chrome .....11530 ......... Retainer Plate. ..........................................................................11531 ......... Retainer Plate for 2-Hole Schedule 40 PVC ............................11540 ......... Retainer Plate Screw ................................................................11580 ......... Slip Joint Nut, ABS, 1.5” ...........................................................11581 ......... Slip Joint Nut, PVC, 1.5” ...........................................................11583 ......... Slip Joint Polywasher, 1.5” .......................................................11619 ......... Double-Loop Wire, 6.5” ............................................................11620 ......... Double-Loop Wire, 7.5” .............................................................11621 ......... Double-Loop Wire, 9.5” ............................................................11622 ......... Double-Loop Wire, 10.5” ..........................................................11623 ......... Double-Loop Wire, 11.375” .......................................................11624 ......... Double-Loop Wire, 13.5” ..........................................................14005 ......... Drop Cylinder, Tubular PVC and Schedule 40 PVC .................14006......... Drop Cylinder with “O”-Ring, Tubular PVC ...............................14017 ......... Tee with Seat, Schedule 40 PVC .............................................20020CP ... TURNSTYLE® Overflow Mount- Chrome ................................41005 ......... Brass Drop Cylinder for Brass ..................................................41540 ......... Brass Screw for Retainer Plate for Brass .................................

01016CP .... Strainer Body, Brass, 1.865” O.D. -11.5 tpi x1.25” depth - CP .01017CP .... PP only, Strainer Body 1.625” O.D. - 16 x 1” depth - CP .........01018CP .... Strainer Body, 1.625”O.D. -14 tpi x1.25” depth - CP. ................01022CP .... Strainer Body, Brass, 1.625” O.D. -16 tpi x1.25” depth - CP ....01033CP .... Bushing Strainer Body, 1.375” O.D.-16 tpi x1.62” depth - CP ..01042CP .... PresFlo® NuFit® Strainer Body - Chrome Plated. ...................01043CP .... Push Pull® NuFit® Strainer Body - Chrome Plated .................01044CP .... Lift and Turn NuFit® Strainer Body - Chrome Plated. ..............01050HP .... QuickTrim® Strainer Body Cover - Chrome .............................11030CP .... PresFlo® Strainer Body, 1.625”-14x1.25” - Chrome Plated......11060CP .... PresFlo® Strainer Body, 1.865”-11.5x1.25” - Chrome Plated ...

STRAINER BODIES (See page 69 for Lavatory Strainer Bodies.)11070CP .... PresFlo® Strainer Body, 1.625”-16x1.25 - Chrome Plated .......11360CP .... Body, 1.865” O.D. -11.5 tpi x1.25” depth, 3.0” Flange - CP ......11370CP .... Str. Body, 1.625” O.D. -16 tpi x1.25” depth, 3.0” Flange - CP ..11380CP .... Str. Body, 1.625” O.D. -14 tpi x1.25” depth, 3.0” Flange - CP ..11420CP .... Strainer Body, 1.749” O.D. -12 tpi x1.25” depth (Gopher) - CP 11430CP .... Basin PP Str. Body, 1.51”-18x1.20”, 2.12” Flange - CP ............11431CP .... Basin PP Str. Body, no OF, 1.51” -18 tpi x1.20”, 2.12” Fl - CP .11490CP .... TL Strainer Body, Zinc, 1.625” O.D. -16 tpi x1.25” depth - CP .11492CP .... Strainer Body, Zinc, 1.865” O.D. -11.5 tpi x1.25” depth - CP. ...11494CP .... Strainer Body, PP - 1.67” O.D. -16 tpi x1.0” depth - CP. ..........11495CP .... TL Str. Body, Zinc, 1.865” O.D. -11.5 tpi x1.25” depth - CP. .....

01042CP .... PresFlo® NuFit® Strainer Body - Chrome Plated. ....................01043CP .... PUSH PULL® NuFit® Strainer Body - Chrome Plated ..............01044CP .... Lift and Turn NuFit® Strainer Body - Chrome Plated ...............01046CP .... Lift and Turn NuFit® Short Stopper - Metal - Chrome Plated ...01052HP .... Universal NuFit® Grid Strainer Body - Chrome ........................11078 ......... Lift & Turn D Pin for NuFit® .......................................................11291CP .... Universal NuFit® Push Pull® Stopper ........................................11307CP .... Universal NuFit® Plastic Knob ..................................................11520 ......... Universal NuFit PP Pin (11537) and Friction Ring (11529) .......11527 ......... Universal NuFit® Seal ...............................................................

NUFIT SERIES / UNIVERSAL NUFIT SERIES PARTS & FITTINGS11529 ......... Universal NuFit® Friction Ring ..................................................11536 ......... NuFit® Push Pull® Pin - 5/16 .....................................................11537 ......... Universal NuFit® Push Pull® Pin, Plastic .................................11539 ......... NuFit® PP Screw, Long #10-32x1”. ...........................................11547 ......... Threaded Adapter Pin - 3/8-5/16 - Brass. ................................11551 ......... Threaded Adapter Pin - #10-24 - Brass. ..................................11554 ......... Threaded Adapter Pin - 1/4-20 - Brass ....................................96057 ........ Silicone Pouch for NuFit® . .......................................................96067 ........ Watco Bonding Strip for no Grid - Green .................................96068 ........ Watco Bonding Strip for Grid - Red. .........................................


Parts List Prices, By Category (Cont.)

7.207.201.704.854.855.354.654.851.250.802.506.80

7.056.654.854.855.105.105.655.354.655.100.450.35

10.4510.4010.8010.2511.7010.9010.90

9.106.85

13.9013.90

14.6017.2517.2517.2514.1010.8512.05

8.957.609.106.25

10.9010.90

9.1012.20

7.055.301.452.351.251.15

0.352.650.550.454.204.204.204.854.704.70

3.751.356.55

18.951.850.602.050.601.501.356.350.955.107.002.753.805.351.700.608.95

6.251.151.250.800.700.700.601.352.652.652.802.803.602.753.805.358.007.200.60


PUSH PULL® & LIFT AND TURN (See Lavatory Section for lav items.)01010CP .... PP/LT Knob, Brass - Chrome Plated ........................................01013CP .... PP/LT Stopper, Brass - Chrome Plated ....................................01016CP .... PP/LT Strainer Body, 1.865”-11.5-1.25” - Chrome Plated .........01017CP .... PP only, Strainer Body 1.625”-16-1.0” - Chrome Plated ..........01018CP .... PP/LT Strainer Body 1.625”-14-1.25” - Chrome Plated ............01022CP .... PP/LT Strainer Body 1.625”-16-1.25” - Chrome Plated ............01033CP .... PP/LT Bushing Strainer Body 1.375”-16-1.5” - Chrome Plated 11079 ......... Lift and Turn “D” Pin, Full Length .............................................11088 ......... Lift and Turn “D” Ring ...............................................................11290CP .... PP/LT StopperPlastic - Chrome Plated ....................................11307CP .... Universal NuFit Plastic Knob ....................................................

11360CP .... Strainer Body, 1.865”-11.5, 3.00” Flange - Chrome Plated ......11370CP .... Strainer Body, 1.625”-16, 3.00” Flange - Chrome Plated .........11380CP .... Strainer Body, 1.625”-14, 3.00” Flange - Chrome Plated .........11420CP .... Strainer Body, 1.749”-12-1.25” (Gopher) - Chrome Plated .......11492CP .... LT/FA Strainer Body, Zinc, 1.865”-11.5-1.25” - Chrome Plated 11494CP .... PP Strainer Body 1-11/16”-16-1.25” - Chrome Plated ...............11505 ......... PP Friction Ring - Large Gap ...................................................11507 ......... Seal, Push Pull® & Lift and Turn, 11/16” dia. ...........................11510 ......... Pin (11532) 3/8” and Friction Ring (11505), PP only.................11511 ......... Pin (11536) 5/16” and Friction Ring (11505), PP only ...............11532 ......... PUSH PULL® Pin, 3/8” - 16 .....................................................

01003CP .... 2-Hole Overflow Plate, Metal ....................................................01024CP .... Overflow Plate Screw, 2.25” .....................................................10080 ........ Elbow for Direct Drain - Polypropylene ...................................10081 ......... Drain Tee for Direct Drain - Polypropylene .............................10082......... Overflow Elbow for Direct Drain - Polypropylene ....................10675 ......... Overflow Elbow Washer, Foam ................................................10696 ........ Drain Elbow Washer, 1.5” gray, Coarse Thread .......................10910 ......... Brass Drop Cylinder for Tubular Plastic ...................................11000 ......... Tee, Tubular ABS ......................................................................11001 ......... Removable Tailpiece Tee, Tubular ABS ...................................11003 ......... Overflow Ell, Tubular ABS ........................................................11004 ......... Overflow Ell Condensate Drain, Tubular ABS ..........................11006 ......... Drop Cylinder with O-Ring, ABS ..............................................11019 ......... Innovator® Overflow Ell, Tubular ABS .....................................11028 ......... Drain Elbow, Coarse Thread, Tubular, ABS .............................11530 ......... Retainer Plate ...........................................................................

TUBULAR PLASTIC PARTS & FITTINGS11540 ......... Retainer Plate Screw (usually requires two) ......................each11580 ......... Slip Joint Nut, ABS ...................................................................11581 ......... Slip Joint Nut, PVC ...................................................................11583 ......... Slip Joint Polywasher ...............................................................11611 ......... Tube Extension - ABS - 10-inch ...............................................11612 ......... Tube Extension - PVC - 10-inch ...............................................11613 ......... Tube Extension - ABS - 14-inch ...............................................11614 ......... Tube Extension - PVC - 14-inch ...............................................11626 ......... 31-3/4-inch Double-Loop Wire .................................................11627 ......... 37-3/4-inch Double-Loop Wire .................................................14000......... Tee, Tubular PVC ......................................................................14001 ......... Removable Tailpiece Tee, Tubular PVC ...................................14003 ......... Overflow Elbow, Tubular PVC...................................................14004......... Overflow Ell Condensate Drain, Tubular PVC ..........................14019 ......... Innovator® Overflow Ellbow Tubular PVC ................................14028 ......... Drain Elbow, Coarse Thread, Tubular PVC ..............................

FOOT ACTUATED01016CP .... Strainer Body, Brass, 1.865”-11.5-1.25” - Chrome Plated ........01018CP .... Strainer Body 1.625”-14-1.25” - Chrome Plated .......................01022CP .... Strainer Body, Brass, 1.625”-16.0-1.25” - Chrome Plated ........11492CP .... LT/FA Strainer Body, Zinc, 1.865”-11.5-1.25” - Chrome Plated

TUB CLOSURE PARTS & FITTINGS

11030CP .... PresFlo® Strainer Body 1.625”-14x1.25” - Chrome Plated .......11060CP .... PresFlo® Strainer Body 1.865”-11.5x1.25” - Chrome Plated.....11070CP .... PresFlo® Strainer Body 1.625”-16x1.25” - Chrome Plated .......11131 ......... PresFlo® “O”-Ring Seal for 1.625”-16 Stopper .........................11132 ......... PresFlo® “O”-Ring Seal for 1.865”-11.5 Stopper ......................

11494CP .... Push Pull® Strainer Body, 1-11/16”-16x1.25”.............................11519 ......... Foot Actuated Replacement Seal .............................................38410CP .... Foot Actuated Replacement Stopper, 5/16” Pin - Chrome. ......38412CP .... Foot Actuated Replacement Stopper, 3/8” Pin - Chrome .........

11140CP .... PresFlo® Stopper-Brass for 1.865”-11.5 - Chrome Plated ........11145CP .... PresFlo® Stopper-Plastic for 1.865”-11.5 - Chrome Plated.......11150CP .... PresFlo® Stopper-Brass for 1.625”-16 - Chrome Plated ...........11155CP .... PresFlo® Stopper-Plastic for 1.625”-16 - Chrome Plated .........96039 ........ PresFlo® Suction Cup, 1-1/2” (for removing PresFlo® stopper)

PRESFLO® (See Lavatory Section for lav items.)


10674 ......... Beveled Sponge Overflow Ell Washer ......................................10121 ......... Watco’s New Strainer Body Removal Tool ...............................11111-Set ... Keychain Color Sample Set ......................................................11114 .......... Test Cap for Innovator® Schedule 40 Series ............................11573 ......... 6” Dial Caliper (4-Way Measure) ..............................................

MISCELLANEOUS PARTS11574 ......... Thread-Gauge Set ....................................................................11575 ......... 3/8” Green Test Plug with “O”-Ring-Type Washer ....................11587 ......... 3/8” Test Plug, Metal Threads - for 600 Series ........................11641 ......... Adapter Bar ...............................................................................SA01010 .... Finish Display Board with Knobs ..............................................

Part

s: L

iste

d by

Cat

egor

y Parts List Prices, By Category (Cont.)

10.4510.8010.25

7.60

9.100.808.358.35

13.9013.9014.60

0.700.70

10.054.659.654.900.70

4.252.153.703.203.801.700.95

18.955.107.005.305.303.804.654.001.15

0.800.700.700.603.753.953.803.808.358.605.107.005.305.304.904.00

1.7020.9534.80

1.3048.15

2.509.55

10.051.55

77.80

2.4511.3010.4510.4010.8010.2511.701.950.552.601.25

17.2517.2517.2514.107.609.100.451.152.502.852.10


New Packaging for Carded Items

Available for mostTrim Kits and Tub Closures

To order,place a “-C”

at end of part number.

Example:48701-PP-BZ-2P-C

Packaging Carded Item

s; Policies & M

iscelaneous Information

Selling Policy: Possession of our list price or jobber discount sheet is not an offer to sell. All orders are subject to acceptance by the home office in Colorado Springs, Colorado.

Minimum Invoice: No invoice will be rendered for less than $25.00 Net.

Taxes and Government Regulations: Sales or manufacturer’s tax imposed under any existing or future statutes shall be added to price of the merchandise effective at the time shipment is made.

Cash Discount: 3% 15 days from date of invoice or 2% 10th prox. Net 30.

Freight Allowance: All goods sold F.O.B. Independence, Missouri. For shipments in the continental United States and Canada, full freight will be allowed on orders of $1,200 list or more. See Mobile Home & RV Supplies list price sheet for exceptions. We reserve the right to ship the most economical way.

Foreign Shipments (including Alaska & Hawaii) will be allowed full freight, according to the conditions listed above, only to the embarkation point in the continental United States.

Shipping Policy: It will be our policy to ship all orders for standard items within two working days after we receive the order. This policy will be followed unless delays are caused by circumstances beyond our control.

Claims, Shortages and Damage: Any claims for shortages or goods damaged in transit must be made within 10 days after receipt of merchandise. All claims should be made to the delivering carrier by the consignee.

Prices, Designs and Quotations: Prices, designs and dimensions of products are subject to change without notice. Quotations, unless otherwise stated, are for immediate accep-tance, and prices quoted are based on the seller’s standard toler-ances of materials. We reserve the right to invoice all merchan-dise at prices in effect at the time of shipment.

Cancellations: Orders covering special merchandise are not subject to cancellation without our written permission. Purchaser subject to expense incurred by cancellation of special orders.

Limited Warranty: All Watco bath wastes and acces-sories carry a limited five-year (5) warranty against defects in material and workmanship.Watco will repair, replace, or issue credit (at our option)for defective goods that are returned for inspection and found defective. WE WILL NOT BE RESPONSIBLE FOR ANY LABOR CHARGES OR ANY LOSS, INJURY OR DAMAGES WHAT-SOEVER, INCLUDING INCIDENTAL OR CONSEQUENTIAL DAMAGES.

Returned Merchandise: Written permission must be obtained from a WATCO representative prior to the return of ANY material. Return of non-defective material with Chrome finish is subject to a minimum 25% restocking charge, plus re-boxing charges. Other finishes and special lengths are subject to a minimum of 50% restocking charge, plus re-boxing charges. Defective material is subject to the limited warranty stated above. Credit will NOT be issued for material received at Watco in non-resalable condition or obsolete merchandise.

Policies and Miscellaneous Information


WATCO


ListBrass Drop Cylinder (Plastic Trip Levers only) . . BD . . .Condensate Drain (Tubular Plastic) . . . . . . . . . . CD . . .Custom Laser Etching . . . . . . . . . . . . . . . . . . . . . LE. . . . One-time set-up charge for new designs . . . . . . . . .Drain Extension . . . . . . . . . . . . . . . . . . . . D(length) . . . .

(Advise length from center line of drain elbow to center line of tee.)Innovator® Drains without any testing . . . . . . . . LTK . . .Metal Stopper for Lift and Turn . . . . . . . . . . . . . MS . . . Metal Stopper for PRESFLO® . . . . . . . . . . . . . . . MS . . . Overflow Extension . . . . . . . . . . . . . . . . . EX(length) . . .

(Advise length from center line of overflow elbow to center line of tee.)

“PUSH” etched both sides of PRESFLO® disk . . E. . . . .Removable Tailpiece (Non-Trip Lever) . . . . . . . . RT2 . .Removable Tailpiece (Trip Lever only) and “O”-Ring Seal . . . . . . . . . . . . . . . . . . . . . . . . . RT1 . .

Tech

Not

es: S

ched

ule

40 &

Tub

ular

Pla

stic

Opt

ions

QUICK ADJUST® Bath Wastes

ADA

TUBULAR PLASTIC OPTIONS

PRESFLO® Bath Wastes

How PRESFLO® Works

A rounded channel [1] is included in the upper part of the strainer body which is compatible with the rounded edges [2] of the PRESFLO® stopper. When the stopper edge is pressed to open, the rounded edges on both sides fit into the rounded channel in the strainer body, forming an operating axis. This happens no matter where you press down on the circular stopper edge.

Closed portion.

Press any edge to open.

Stopper disc, with Buna-N-Seal, in open position.

Press top edge toward side to close.

To remove the PRESFLO® stopper from the strainer body, attach the furnished suction cup and pull straight up.

ADA

SCHEDULE 40 OPTIONS

QUICK ADJUST® InstallationA Establish rough-in length at

overflow elbow scale.


NOTE:Typical installation for:Model 500-TQ (ABS or PVC)Model 501-TQ (17ga Brass)Model 502-TQ (20ga Brass)

TechNotes

7.954.80

10.95200.00

6.40

<3.70>1.705.05

11.75

10.95

2.15

List2-Hole Overflow Elbow and Faceplate . . . . . . . . 2H . . . Add Adapter Bar and Star Nut . . . . . . . . . . . . . . 11 . . . .Condensate Adapter included on bath waste . . . CD . . .Custom Laser Etching . . . . . . . . . . . . . . . . . . . . . LE. . . . One-time set-up charge for new designs . . . . . . . . .Drain Extension, ABS . . . . . . D(length) . . . . . . per inch: Drain Extension, PVC . . . . . . D(length) . . . . . . per inch:

(Advise length from center line of drain elbow to center line of tee.)Innovator® Sch40 Drains without any testing . . . LMT . .Innovator® Overflow Thread Extender . . . . . . . . OEX . . Factory-installed. (Extends overflow elbow from 11/4” to 13/4”)Metal Stopper for Lift and Turn . . . . . . . . . . . . . MS . . . Metal Stopper for PRESFLO® . . . . . . . . . . . . . . . MS . . . No Tee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . NTEE .No Tee or Pipe . . . . . . . . . . . . . . . . . . . . . . . . . . 13 . . . .Overflow Extension, ABS . . . EX(length) . . . . . per inch: Overflow Extension, PVC . . . EX(length) . . . . . per inch:

(Advise length from center line of overflow elbow to center line of tee.)“PUSH” etched both sides of PRESFLO® disk . . E. . . . .Sanitary Tee added to a Half Kit . . . . . . . . . . . . . T . . . . . Test Cap (#11114), no membrane (Innovator®) . TC . . .Test Kit (600’s) using 2-hole overflow elbow with adapter bar, thumb screw, and OE test plug, PVC only . . TK . . . Test Kit (for 600 Series), plastic, includes #11575 and #11594 test plugs . . . . . T6 . . . .

N/C3.253.95

10.95200.00

0.450.35

<2.55>1.55

1.705.05

<4.85><5.75>

0.450.35

10.952.501.20

4.20

2.70


Removing Stoppers from Strainer Bodies

Lift and Turn & PUSH PULL® Stoppers:1. Close stopper.2. With cloth protecting knob and stopper,

use pliers/wrench to turn knob counter-clockwise to unscrew from stopper.

3. Using flat-head screw driver in slot in top of exposed brass pin, turn pin counter-clockwise to remove pin from crossbars in strainer body.

Standard Foot Actuated Stoppers:1. Remove flat cap of stopper by turning it

counter-clockwise.2. Use flat-head screwdriver to unscrew pin

from crossbars in strainer body. DO NOT DISASSEMBLE REST OF STOPPER.

Universal NuFit® Foot Actuated Stoppers:

DO NOT REMOVE FOOT ACTUATED STOPPER FROM BODY OF PRODUCT. CONTACT THE FACTORY.

11.7

5" m

in (2

98m

m)

14" m

ax (3

56m

m)

6.75" min(171mm)9.25" max (235mm)

1.5” (38mm)


Rough-In Dimensions

20.2

5" m

in (5

14m

m)

22.5

" max

(572

mm

)

11.625" min(295mm)14.125" max (359mm)

1.5” (38mm)


Rough-In Dimensions

6.5"

min

(165

mm

)14

" max

(356

mm

)

4.75" min(121mm)9.5" max (241mm)

1.5” (38mm)


Rough-In Dimensions

6.5"

min

(165

mm

)22

.5" m

ax (5

71m

m)

1.5"(38mm)

4.75" min(121mm)14.375" max (365mm)


Rough-In Dimensions

TUBULAR BRASS OPTIONS

A Complete Bath Waste is made up of both the RI (Rough-In) and the SF (Stopper/Faceplate).

Purchase a Complete Bath Waste if installation will be completed in one operation.

A Rough-In (RI) has all the bath waste parts that go behind and below the tub AND has the Strainer Body.

It does NOT have the faceplate or stopper assembly.

Purchase a Rough-In (RI) when the faceplate and stopper will be installed later.

A Stopper/Faceplate (SF) is NOT a trim kit. It usually contains only the stopper and faceplate and is to be

installed after installation of the roughed-in part of the bath waste has been completed.

Purchase a Stopper/Faceplate (SF) to complete Rough-In.

Understanding RI’s and SF’s...

ListBrass Ferrules (2 usually required) . . . . . . . . . . . . F . . . . . eachBrass Half Ferrules (2 usually required) . . . . . . . . HF . . . eachCondensate Drain (Brass Tubular) . . . . . . . . . . . . CD2 . . . . . . Condensate Drain for Innovator Brass . . . . . . . . . CD3 . . . . . . Custom Laser Etching . . . . . . . . . . . . . . . . . . . . . . LE. . . . . . . . One-time set-up charge for new designs . . . . . . . . . . . . . .Extension - Drain, 17 Gauge . . . . . . . . . D(length) . . . per inch: Extension - Drain, 20 Gauge . . . . . . . . D(length) . . . per inch: (Advise length from center line of drain elbow to center line of tee.)Extension - Overflow, 17 Gauge . . . . . . EX(length) . . per inch: Extension - Overflow, 20 Gauge . . . . . . EX(length) . . per inch:(Advise length from center line of overflow elbow to center line of tee.)Extension - Tailpiece, 17 Gauge . . . . . . TX(length) . . per inch: Extension - Tailpiece, 20 Gauge . . . . . . TX(length) . . per inch: Innovator® Drains without any testing . . . . . . . . . LTK . . . . . . .Metal Stopper for Lift and Turn . . . . . . . . . . . . . . MS . . . . . . . Metal Stopper for PRESFLO® . . . . . . . . . . . . . . . . MS . . . . . . . “PUSH” etched both sides of PRESFLO® disk . . . E. . . . . . . . .

TechNotes: Tubular B

rass Options - M

iscellaneous Information

Converting from Coarse-Thread Trip Lever Bath Wastes to:

Lift and Turn Stopper: Kit 58290-___ pg 54.Push Pull® Stopper: Kit 38290-___ pg 54.PresFlo® Stopper: Kit 38250-___ pg 54.Foot Actuated Stopper: Kit 68290-___ pg 54.

TechNotes

2.451.807.007.00

10.95200.00

1.751.65

1.751.65

1.751.65

<3.70>1.705.05

10.95

© 2015 WATCO Mfg. Co.

WATCO MANUFACTURING COMPANY1220 South Powell Road • Independence, MO 64057-2724

PHONE: 816-796-3900 • 800-821-8576 • FAX: 816-796-0875 • 800-399-2826 • www.watcomfg.comA Division of WCM Industries, Inc.

Call WATCO for assistance 1-800-821-8576

Representative Questions?

®

WATCO

watco 2015 price guide

Documents