www.edincare.comt:01442 211554

WASTE WATER PUMPING SYSTEMS

SumpFlush

The SumpFlush is a fully automatic waste water pumping systemsuitable for pumping surface and/or ground water to a higherlevel when gravity drainage is not possible and/or economical toinstall.

The system is suitable for installing either at the initial buildingstage or retro fitting to existing buildings and can accept wastefrom car parks, car washes, floor areas, down pipes, cavitymembrane systems or similar.

The system consists of a polyethylene tank with a singleautomatic waste water submersible pump. It can accept surfaceand/or ground water through the grille located on the top ofthe unit or through two 110mm inlets located to the side (sideinlets to be specified at time of order, grille cover is an additionaloption).

The SumpFlush is easy to install due to the small chamber, smallbore discharge pipe work, and variable inlet locations.

KEY FEATURES

• Compact chamber forinstallation in small areas• Reliable ‘OpenFlow’ wastewater pump/s• Supplied with a solid or grillcover• Battery back up optionsavailable on request

PUMP CURVE DIMENSIONS TECHNICAL SPECIFICATION

SUITABLE FOR

WASTE TYPE

CHAMBER DIAMETER HEIGHT

600mm 600mm

ACCESS COVER LENGTH WIDTH DEPTH

Clear opening 350mm 350mm N/A

(incl. frame) 415mm 415mm 40mm

WEIGHT

TOTAL BOXED WEIGHT

16.5 KG

OPTIONAL EXTRAS

All our products can be customised to yourrequirements. For more information on this pleasecontact our Sales Team on 01442 211554.

CHAMBER

Colour White

Material Polyethylene

Capacity 100 l

Lifting eyes No

Discharge size 1 1/4"

PUMP

No. of pumps 1

Pump type Vortex

Power supply 1 PHASE

Rated current 1.9A

Motor rating 180W

Revolutions per min. 2800rpm

Max. vertical 6.8m

Max. flow rate 2.9 l/sec

Frequency 50 Hz

Max liquid temp. <40°C

Cable length 5m

ACCESS COVER

Material Galvanized Steel

Loading Solid Top, (Facta AA)

Locking Yes

WASTE WATER PUMPING SYSTEMS

SumpFlush

AFTER SALES

We offer a comprehensive range of after sales servicesthat include:

- Planned servicing- Emergency call-outs- Commissioning- Monitoring- Tankering and Jetting

Our engineers are fully trained in all aspects ofworking with pumped drainage systems, as well asbeing specifically trained in the use of gas detectionequipment, confined space entry procedures and allrelevant health and safety legislation.

Please contact our aftersales department on 01442211554 for further information.

MAINTENANCE

The product should be inspected every three months.

A full visual inspection should be undertaken to theproduct to assess its overall condition, this must includeall electrical and mechanical components.

In addition to the above it is important that the productundergoes regular servicing. As with all systems ofthis nature, regular maintenance is essential to ensurethe system operates at its optimum level and fulfils itsexpected lifespan. The product must be maintained atintervals of:

Once per annum - Single residential dwellingTwice per annum - Single residential dwelling wherethere is a risk of flooding as a result of product failure(for example, basement applications) & Multipleresidential dwellingsFour times per annum - Commercial premises

HEALTH & SAFETY

Edincare Pumps are registered with British SafetyCouncil, Constructionline, Safe Contractor, CHAS, ISO,Basement Waterproofing Association, PCA, FORS &NICEIC demonstrating our commitment to Health andSafety and our quality of workmanship.

DELIVERING PUMPEDSOLUTIONS NATIONWIDE

Edincare Pumps has been establishedfor over 25 years specializing in themanufacture, project design, sale,commission, service and repair ofpumped drainage solutions.

OUR PRODUCT RANGE

- Packaged pumping stations- Waste water pumping systems- Macerators & macerating toilets- Floor mounted pumping stations- Fat, oil & grease separating systems- Rainwater harvesting systems- Battery Backup Systems- Adoptable Pumping Stations

CHOOSE WITH CONFIDENCE

1 year gaurantee

Service agreement

Commissioning

Availability

WWW.EDINCARE.COM ...

Installation guide

Technical drawing

BIM drawing

NBS Specification

Catalogue

PROJECTS

SITE SURVEYSWe offer no obligation On Site Surveys and Inspectionsof pumping schemes for refurbishment, installations,servicing, insurance assessment and general feasibilitystudies.

Our team of experienced Project Coordinatorswill survey your site to fully assess the specificrequirements of your pumping scheme. Our ProjectTeam will work with you to manage the process fromstart to finish.

The pumping scheme will be fully inspectedmechanically, electrically and for operational capabilitywith a full report of our findings, recommendations andquotation supplied.

PROJECT DESIGNWe offer a full in-house design service working fromeither site drawings, or where appropriate, undertakeno obligation On Site Surveys.

Our Project Team will produce a detailed technicalspecification and quotation considering all technicalparameters (application, location, flow rate, mediumtype, electrical supply plus ensure it adheres withcurrent regulations).

Our Project Coordinators are trained in all technicalaspects to ensure that the most cost effective andefficient solution is offered.

INSTALLATIONSOur services range from the installation of new controlequipment, submersible pumps through to full pumpstation refurbishments.

Customers can simply assign the responsibility forthe installation to our Project Team knowing that ourteam of experienced Project Coordinators and ServiceEngineers will complete the installation on time andwithin budget.

Upon completion a handover service is offered whereour technical representative will attend site and conductan onsite demonstration of the equipment.

APPLICATION

01442 211554 info@edincare.com linkedin.com/company/edincarepumps

01442 211553 www.edincare.com twitter.com/edincarepumps

Unit 8, Heron Business Park, Eastman Way, Hemel Hempstead, Hertfordshire, HP2 7FW

Our policy is one of continuous product improvement, we reserve the right to change specifications and prices without prior notice. All information is given in good faith. No responsibility can be accepted for errors,omissions or incorrect assumptions. © Copyright 2017 Omni Pump International Ltd t/a Edincare Pumps. All rights reserved.