waste hauler catalog · 2020. 7. 1. · peterbilt components..... 10 miscellaneous waste hauler...
TRANSCRIPT
WASTE HAULER CATALOG
WITH ATRO BEHIND YOU, DRIVE FORWARD.6 Bolte Lane
St. Clair, Missouri 63077 | U.S.A.800.325.6114 | Fax 866.920.2005
ATROBUSHING.COM
CONTENTSTwo-Piece Torque Rod Chart: Large Eye .................1Two-Piece Torque Rod Chart: Small Eye .................2Autocar ......................................................................3Chalmers ...................................................................3Fuller Transmission ...................................................5Hendrickson HN/Haulmaax .....................................5Mack Camelback ......................................................7Mack Cab & Transmission Components .................8Peterbilt Components ............................................ 10Miscellaneous Waste Hauler Components .......... 12
ATRO Engineered Systems, Inc. is not liable for any errors herein. All manufacturers’ names and part numbers are used without permission; no endorsement, affiliation, or recommendation is implied. They are included for reference purposes only.
©JANUARY 2020 ATRO ENGINEERED SYSTEMS, INC.
For over 30 years, ATRO Engineered Systems has applied our strength in engineering to solve challenges facing the heavy-duty trucking industry. From our founding, we saw rubber bushings wore out quickly, taking trucks out of service and in for repair. That led to our development of longer lasting polyurethane as an alternative to rubber. We identified a problem in torque rod failure that led to us developing the free rotation design that not only lasts longer but are also easier to install. And more recently, as engine design has evolved for improved fuel efficiency, underhood parts couldn’t withstand the hotter running engines and we developed our High-Temp line of Underhood products.
ATRO’s line of parts run bumper to bumper—Suspensions, Torque Rods, Underhood and Trailer. All designed with unique blends of polyurethane for the rigors of each part. ATRO parts are engineered with precision to improve performance and help our customers improve the productivity of their fleets.
With ATRO Behind You, Drive Forward.
For additional products or information,visit us online at atrobushing.com
TWO-PIECE TORQUE ROD CHART: Large Eye
Female End Male EndPART # BUSHING A PART # BUSHING HOLE ID
TR71000 TS38000 4-3/8" c-c 5/8" Bolt TR85000 TH50000 1-1/8"
TR74000 TS38750 4-3/8" c-c 3/4" Bolt TR87000 TH99-22101 7/8"
TR83000 TS38875 4-3/8" c-c 7/8" Bolt
TR88000 TS50-22649 5-1/4" c-c .91" Bolt
Straddle/Hollow
Female End Male EndPART # BUSHING Hole ID PART # BUSHING HOLE ID
TR84000 TH50000 1-1/8" TR85000 TH50000 1-1/8"
TR86000 TH99-22101 7/8" TR87000 TH99-22101 7/8"
Hollow/Hollow
Female End Male EndPART # BUSHING A PART # BUSHING B
TR72000 TT38000 8" TR76000 TT38000 8"
TR73000 TM38000 7" TR77000 TM38000 7"
TR80000 TT34038 6-5/8" TR81000 TT34038 6-5/8"
Taper Stud/Taper Stud
Female End Male EndPART # BUSHING A PART # BUSHING B
TR71000 TS38000 4 3/8" c-c 5/8" Bolt TR75000 TS38000 4 3/8" c-c 5/8" Bolt
TR74000 TS38750 4 3/8" c-c 3/4" Bolt TR78000 TS38750 4 3/8" c-c 3/4" Bolt
TR83000 TS38875 4 3/8" c-c 7/8" Bolt TR79000 TS38875 4 3/8" c-c 7/8" Bolt
TR88000 TS50-22649 5 1/4" c-c .91" Bolt TR89000 TS50-22649 5 1/4" c-c .91" Bolt
Straddle/Straddle
Female End Male EndPART # BUSHING A PART # BUSHING B
TR71000 TS38000 4-3/8" c-c 5/8" Bolt TR76000 TT38000 8"
TR74000 TS38750 4-3/8" c-c 3/4" Bolt TR77000 TM38000 7"
TR83000 TS38875 4-3/8" c-c 7/8" Bolt TR81000 TT34038 6-5/8"
TR88000 TS50-22649 5-1/4" c-c .91" Bolt
Straddle/Taper Stud (Female Straddle)
Female End Male EndPART # BUSHING A PART # BUSHING B
TR72000 TT38000 8" TR75000 TS38000 4-3/8" c-c 5/8" Bolt
TR73000 TM38000 7" TR78000 TS38750 4-3/8" c-c 3/4" Bolt
TR80000 TT34038 6-5/8" TR79000 TS38875 4-3/8" c-c 7/8" Bolt
TR89000 TS50-22649 5-1/4" c-c .91" Bolt
Straddle/Taper Stud (Female Taper Stud)
Two Piece Torque Rods allow you to maintain a limited inventory with maximum flexibility. Match the male and female rods for lengths up to 27”. The ultimate in convenience.
Center to Center Measure
- Page 1 -
9Measure Center to Center Length of the Rod Eye
9 Ruler on male end rods shows precise final cut point - NO MATH!!! 9 Reduces mistakes and wasted inventory 9 Only one weld
TWO-PIECE TORQUE ROD CHART: Small Eye
TWO PIECE SMALL EYE ROD FEATURES:• Forged Rod Eyes• Heavier Rod Bar• 2 Year Warranty
ROTATING BUSHING FEATURES:• Chemically Resistant• 3 Year Warranty
BENEFITS:• The free rotating bushing eliminates the clocking concerns. • This results in the need for less inventory and makes installation easier and quicker.• The bushing material last 2-5 times longer than rubber.
Female End Male EndPART # BUSHING A PART # BUSHING HOLE ID
TR35205 TS00-22500 4-3/8” c-c 5/8” Bolt TR35115 TH00-22500 7/8”
TR35220 TS50-22575 4-3/8” c-c 3/4” Bolt
Straddle/Hollow
Female End Male EndPART # BUSHING Hole ID PART # BUSHING HOLE ID
TR35215 TH00-22500 7/8” TR35115 TH00-22500 7/8”
Hollow/Hollow
Female End Male EndPART # BUSHING A PART # BUSHING B
TR35210 TT50-22500 8” TR35110 TT50-22500 8”
TR35225 TT50-22501 6-5/8” TR35125 TT50-22501 6-5/8”
Taper Stud/Taper Stud
Female End Male EndPART # BUSHING A PART # BUSHING B
TR35205 TS00-22500 4-3/8” c-c 5/8” Bolt TR35105 TS00-22500 4-3/8” c-c 5/8” Bolt
TR35220 TS50-22575 4-3/8” c-c 3/4” Bolt TR35120 TS50-22575 4-3/8” c-c 3/4” Bolt
Straddle/Straddle
Female End Male EndPART # BUSHING A PART # BUSHING B
TR35205 TS00-22500 4-3/8” c-c 5/8” Bolt TR35110 TT50-22500 8”
TR35220 TS50-22575 4-3/8” c-c 3/4” Bolt TR35125 TT50-22501 6-5/8”
Straddle/Taper Stud (Female Straddle)
Female End Male EndPART # BUSHING A PART # BUSHING B
TR35210 TT50-22500 8” TR35105 TS00-22500 4-3/8” c-c 5/8” Bolt
TR35225 TT50-22501 6-5/8” TR35120 TS50-22575 4-3/8” c-c 3/4” Bolt
Straddle/Taper Stud (Female Taper Stud)
- Page 2 -
AUTOCAR
MM96-62657Engine Mount Model: ISL EngineOEM#: 8077380Length: 3”Inner Diameter: 1-1/2”Small Outside Diameter: 3”Qty Per Vehicle: 2
TM99-63506Transmission MountOEM#: PA14-052013Height: 1-7/8”Width: 2-7/8”Length: 4-3/4”Bolt Hole: 15/32”Bolt Holes: 3-3/4” c-cStud: M10x1.5
TR13-41022Torque RodOEM#: 35801-0033AM: TMR639, TMR9247Length: 22” c-c Bushings: TS38000/TT38000Qty Per Vehicle: typically 2
The above ATRO’s rods solve a problem of breaking rods some trucks have experienced.
CHALMERS
TR13-41635Torque RodOEM#: A3580010-635 S358001-635 S3580003-635AM: TMR640Length: 25” c-c Bushings: TS59-22400/TT38000Qty Per Vehicle: typically 2
NOTE: TS59-22400 is High Articulation Bushing
HW19-29201Bolt Kit Type “1” JointModel: 800 Series, 40KOEM#: HDW379, HDW381, K880640AM: BKC580500GR8FDayton: 334-770Length: 5” BoltOD: 5/8” BoltQty Per Vehicle: 16Contains: (1) Flanged Bolt (1) Flanged Locknut
HW19-29202Bolt Kit Type “2” JointModel: 800 Series, 50-100KOEM#: HDW379, HDW382, K880231AM: BKC580512GR8FDayton: 334-754Length: 5-1/2” BoltOD: 5/8” BoltQty Per Vehicle: 16Contains: (1) Flanged Bolt (1) Flanged Locknut
LP19-24002Load SpringModel: 800 Series, 40K-58KOEM#: 15002GAFF: 11740AM: MLC11, MLC11UB Dayton: 325-156Height: 8”ID: 2”OD: 9-1/2”Qty Per Vehicle: 2
MS19-29028Restrictor Can, StandardModel: 800 Series, 40K-58KOEM#: 373028, 373020AM: M11844Dayton: 334-860Height: 4-7/16”OD: 12-5/8”Qty Per Vehicle: 2
MS19-29029Restrictor Can, High StabilityModel: 800 Series, 40K-58KOEM#: 373021, 373029AM: M17984Dayton: 334-261Height: 5-3/16”OD: 11-5/8”Qty Per Vehicle: 2
ATRO’s load springs are chemically resistant and will not take a permanent compresstion set like rubber, keeping ride height accurate and driveline angles in spec.
These mounts feature ATRO’s chemically resistant polyurethane that lasts 3-5 times longer than rubber.
Volvo cross 3081657
- Page 3 -
MS19-29055Spigot Cap, Type 2Model: 800 Series, 50K-58KOEM#: 800055AM: M18004Dayton: 334-855ID: 5/8” BoltOD: 4-1/2”Qty Per Vehicle: 16
MS19-29201Spigot Cap, Type 1Model: 800 Series, 40KOEM#: 800201AM: M21610Dayton: 334-853ID: 5/8” BoltOD: 4”Qty Per Vehicle: 16
PL1046Torque Rod BushingModel: 800 Series, 50K-58KOEM#: 800010GAFF: 11739AM: TRB8644, TRB8644UBDayton: 321-276, 321-276ULength: 2-1/8”ID: 2-9/16”Small OD: 3-9/16”Large OD: 4-5/16”Qty Per Vehicle: 32
PL1047Torque Rod BushingModel: 800 Series, 40KOEM#: 22128GAFF: 18919AM: TRB6328, TRB6328UBDayton: 321-273, 321-273ULength: 1-15/16”ID: 2-7/16”Small OD: 3-1/4”Large OD: 3-5/8”Qty Per Vehicle: 32
PL1049Torque Rod Bushing, OversizedModel: 800 Series, 50K-58KOEM#: 800009GAFF: 18921AM: TRB8645, TRB8645UBDayton: 321-277, 321-277ULength: 2-1/8”ID: 2-1/2”Small OD: 3-5/8”Large OD: 4-9/16”Qty Per Vehicle: 32
TH19-22128Torque Rod BushingModel: 800 Series, 40KOEM#: 22082GAFF: 18919AM: TRB6327Dayton: 321-273 , 321-273ULength: 3-3/4”ID: 2-3/8”Small OD: 3-1/8”Large OD: 3-11/16”Qty Per Vehicle: 16
NOTE: 1 Piece design For 2-Piece design see PL1047
TH19-22129Torque Rod Bushing, OversizedModel: 800 Series, 40KOEM#: 22129GAFF: 18920AM: TRB6327Dayton: 321-274Length: 3-3/4”ID: 2-3/8”Small OD: 3-3/16”Large OD: 3-11/16”Qty Per Vehicle: 16
NOTE: 1 Piece Oversized design
CHALMERS
ATRO’s two-piece bushings allow for easier installation by eliminating the interference between the spigot and ID. Simply slide one half of the two-piece bushing over opposite spigot ends and install the bare rod, install the second half of the bushings, caps and bolts. Reduces install time by 30% to 50%.
- Page 4 -
FULLER TRANSMISSION
EB50-21013Bar Pin Bushing KitModel: Haulmaax, HNOEM#: 34013-87GAFF: 13607AM: BP198Dayton: 334-830
KT50-25002Suspension KitModel: HaulmaaxQty Per Vehicle: 1Contains: (8) Bolsters w/hardware (2) Progressive Load Springs w/hardware (2) Shims
NOTE: Ships in 2 boxes
One Part Number includes EVERTHING for the job!
HENDRICKSON HN/HAULMAAX
MS99-63399Shifter Isolator Bushing KitModel: MultipleOEM#: 21244, 23311, K3399, K-3399GAFF: 11611AM: M13311, M23311E, M23311UB, M23311EUBLength: 2.3” ID: .84”OD: 1-1/2”Qty Per Vehicle: 1Contains: (1) Shifter Isolator Bushing (2) Step Bushings (1) Shoulder Bolt (1) Locknut
PT99-63399Shifter Isolator Bushing Removal Tool
NOTE: Easily removes the bushing with slide hammer
Benefits over O.E. rubber: Ease of installation (no hydraulic press required)No drilling needed (average labor cost to drill is $60)More vibration dampening(Note: O.E. bushings are extremely difficult to remove)
Benefits over competitors polyurethane bushing: Pre-alignment step and guide mark (aids alignment)High tolerance inside diameterHigh tolerance/strength shoulder bolt Step bushings prevent over tightening
KT50-25005Suspension KitModel: HNQty Per Vehicle: 1Contains: (4) Bolsters w/hardware (2) Auxiliary Load Springs w/hardware
NOTE: Ships in 2 boxes
One Part Number includes EVERTHING for the job!
Length: 8-1/2” c-cLarge OD: 4-3/8”Bolt Holes: 1-1/16”Qty Per Vehicle: 4Contains: (1) Bar Pin Bushing (2) Bolts & Nuts (4) Shims & Washers
Rotating BushingEquals
EASY INSTALL
- Page 5 -
HENDRICKSON HN/HAULMAAX
TR50-41615Torque RodModel: HaulmaaxOEM#: 62350-615, 8244-0099-610GAFF: 13733Dayton: 345-907Length: 24-1/4” c-c Bushings: TS38000/TT38000Qty Per Vehicle: typically 2
TR50-42565Torque RodModel: HaulmaaxOEM#: 67428565, 62000-565, 62001-565, 62011-565AM: TMR68, TMR617B, TMR617EDayton: 345-898Length: 22-1/4” c-c Bushings: TS38000/TS38000Qty Per Vehicle: typically 2
LP50-24902Progressive Load Spring KitModel: HaulmaaxOEM#: 65902-004Dayton: 334-1968 Qty Per Vehicle: 1 Contains: (2) Load Springs (2) Shims (6) Bolts (6) Locknuts
Most important part on Haulmaax suspension! It is NOT an overload spring or a bump stop. It is designed to carry up to 40% of the load.
LP50-24974Auxiliary Load Spring KitModel: HN 402/460/462OEM#: 641794, 60314000, 64179004GAFF: 13611Dayton: 334-1720 Qty Per Vehicle: 2Contains: (1) Load Springs (3) Bolts (3) Locknuts
Most important part on HN suspension! The auxiliary spring should be replaced if the spring itself measures less than 3” in height when the truck is unloaded.
LP50-24000Bolster Spring (Set of 2)Model: HN 402/460/462OEM#: 49377, 60879, 49377000, 60879000LGAFF: 13601, 13721AM: MLC1Dayton: 334-852, 334-852AQty Per Vehicle: 2Contains: (2) Bolsters
NOTE: ATRO recommends the replacement of the rubber load spring with an LP50-24974 Auxiliary Load Spring Kit
LP50-24179Bolster Spring KitModel: HaulmaaxOEM#: 64179-037, 64179-048, 64179-002, 65743-000GAFF: 13626AM: MLC5Dayton: 334-1727 Qty Per Vehicle: 4Contains: (2) Bolster Springs (1) Spacer (1) Flange Bolt (9) Flange Nuts
NOTE: ATRO recommends the replacement of the rubber load spring with an LP50-24778 Progressive Load Spring
ATRO’s polyurethane material in the bolster springs and load springs is impervious to chemical attack, resulting in a longer life of the components.
ATRO torque rod bushings feature chemically resistant polyurethane for long life of the bushing. The bushings also feature a rotating pin design-eliminating bushing wind up & making for easier installation.
LP50-25004Suspension KitModel: HNContains: (2) Bolsters w/hardware (1) Auxiliary Load Springs w/hardware
- Page 6 -
MACK CAMELBACK
TR62-41180Torque RodModel: CamelbackOEM#: 1RY48P23, 25153567, 25162529, 17QF251P11,17QF463P180, 17QF464P180GAFF: 12072AM: TMR559, TMR528, TMR564, TMR590, TMR559R, TMR590R, TMR564RDayton: 345-222Length: 18” c-c Bushings: TS38000/TM38000Qty Per Vehicle: typically 2
TR62-41220Torque RodModel: CamelbackOEM#: 25174706, 17QF511, 17QF460P220GAFF: 13634AM: TMR547, TMR555Length: 22” c-c Bushings: TS38000/TS38000Qty Per Vehicle: typically 2
SK62-50340Insulator Kit w/Hardware & Spacer BlocksModel: Camelback SS34-44 Series, SW ST34 SeriesOEM# for Pads: 10QK367, 10QK36B, 10QK36C, 10QK388, 10QK365A, 21036254, 25121508, 25125064, 10QK343P7GAFF: 12039AM: ABP34HK, ABP34RK, ABP34HPK, ABP34RPK, ABP34UBK Qty Per Vehicle: 1Contains: (4) Load Pads, Lower (4) Load Pads, Upper (8) Insulator Spacer Block (4) Bolts, 7/8”-9UNC 4” (12) Bolts, 7/8”-14UNF 5” (12) Locknuts (16) Flat Washers
NOTE: Complete Camelback Kit; Ships in 2 boxes
SK62-50380Insulator Kit w/Hardware & Spacer BlocksModel: Camelback SS34-44 Series, SW ST34 SeriesOEM# for Pads: 10QK36B, 10QK36C, 10QK370, 10QK388, 21036254, 25115012, 25125064GAFF: 12036AM: ABP38HK, ABP38RK, ABP38RPK, ABP38UBK, ABP38HPK Qty Per Vehicle: 1Contains: (4) Load Pads, Lower (4) Load Pads, Upper (8) Insulator Spacer Block (4) Bolts, 7/8”-9UNC 4” (12) Bolts, 7/8”-14UNF 5” (12) Locknuts (16) Flat Washers
NOTE: Complete Camelback Kit; Ships in 2 boxes
ATRO’s Insulator Load Pads feature shock absorbing, low rebound polyurethane material which causes the shock to remain within the pad and NOT transfer thoughout the suspension system. This results in a smoother ride, longer life of pads, extended life of attached parts, less cab damage and reduction in T-Leaf failure.
- Page 7 -
MACK CAB & TRANSMISSION COMPONENTS
HM62-64362Hood Rest Bracket, RightOEM#: 20802362AM: M62433 Qty Per Vehicle: 1
NOTE: Use with ATRO PN HM62-64371
HM62-64371Hood Rest Bracket, LeftOEM#: 20802371AM: M62434 Qty Per Vehicle: 1
NOTE: Use with ATRO PN HM62-64362
HM62-64M31Pin Hood GuideOEM#: 25QM31Length: 4-1/16”Small OD: 1-1/2”Large OD: 3-5/16”Thread Size: 3/8”-24 UNF x 1-1/8”Qty Per Vehicle: 2
PL1017-HTTransmission Mount, High TemperatureOEM#: 20QL1175, 25167342,20QL1118AGAFF: 12000AM: M1, M1UBDayton: 329-109ULength: 1-1/2”ID: 3/4”Small OD: 1-11/16”Large OD: 3-3/16”Qty Per Vehicle: 8
NOTE: See KT62-62216-HT & KT62-62389-HT for complete kits
TR62-413M3Torque RodModel: CamelbackOEM#: 25170831 25014582, 17QF358, 17QF473M, 17QF460P200GAFF: 12070AM: TMR529, TMR568, TMR683Length: 20” c-c Bushings: TS38000/TS38000Qty Per Vehicle: typically 2
TR62-41243Torque RodModel: CamelbackOEM#: 25170833, 17QF352M2, 17QF473M4, 17QF264P23, 17QF460P243GAFF: 12071Length: 24-1/4” c-c Bushings: TS38000/TS38000Qty Per Vehicle: typically 2
TR62-413M2Torque RodModel: CamelbackOEM#: 25170832, 17QF460P210GAFF: 12069AM: TMR570Dayton: 345-892Length: 21” c-c Bushings: TS38000/TS38000Qty Per Vehicle: typically 2
MACK CAMELBACK
ATRO torque rod bushings feature chemically resistant polyurethane for long life of the bushing.
The bushings also feature a rotating pin design eliminating bushing wind up and making for easier installation.
- Page 8 -
MACK CAB & TRANSMISSION COMPONENTS
KT62-62389Insulator KitModel: Fuller & Allison TransmissionsOEM#: 204SX389GAFF: 12035AM: M1K2Qty Per Vehicle: 1Contains: (8) PL1017 Mounts (8) Washers (4) Bolts, 3/4”-16 x 5” (4) Locknuts
NOTE: Polyurethane does not corrode like rubber
KT62-62389-HTInsulator Kit, High TemperatureModel: Fuller & Allison TransmissionsOEM#: 204SX389GAFF: 12035AM: M1K2Qty Per Vehicle: 1Contains: (8) PL1017-HT Mounts (8) Washers (4) Bolts, 3/4”-16 x 5” (4) Locknuts
NOTE: If you see crumbling rubber, this is an excellent solution
KT62-62216Insulator KitModel: Mack TransmissionsOEM#: 204SX216GAFF: 12034AM: M1KQty Per Vehicle: 1Contains: (8) PL1017 Mounts (8) Washers (4) Bolts, 3/4”-16 x 6-1/2” (4) Locknuts
NOTE: Polyurethane does not corrode like rubber
KT62-62216-HTInsulator Kit, High TemperatureModel: Mack TransmissionsOEM#: 204SX216GAFF: 12034AM: M1KQty Per Vehicle: 1Contains: (8) PL1017-HT Mounts (8) Washers (4) Bolts, 3/4”-16 x 6-1/2” (4) Locknuts
NOTE: If you see crumbling rubber, this is an excellent solution
ATRO High Temperature engine mounts perform in the extreme conditions of EGR/SCR engine systems. The ATRO HT formula is the only high temperature resistant polyurethane in the marketplace and greatly exceeds the performance of rubber. These high temperature motor mounts resist scorching heat, retain their form, consistency and elasticity while reducing vibration in the cab and helping prevent sudden load shifts.
- Page 9 -
PETERBILT COMPONENTS
CM75-61055Cab MountModel: 320OEM#: 170-55Length: 2-3/4”ID: 1/2”OD: 3-3/8”Qty Per Vehicle: 2
EM75-69096-HTExhaust/Radiator Mount; Air to Air Bushing (High Temp)Model: 357, 375-379, 385 Pre 1995 StandardOEM#: 13-03096AM: M13309Height: 1/4” (flange)Large OD: 1-1/16”OD: 3/4” (nipple) NOTE: Accepts 3/8” diameter fasteners (not included)
EM75-69656-HTExhaust Bushing (High Temp)Model: 357, 375-379, 385OEM#: 14-14656GAFF: 1235712358AM: M20311, M20311UBLength: 1-3/8” ID: 3/8”Small OD: 3/4”Large OD: 1-1/4”
MACK CAB & TRANSMISSION COMPONENTS
WP62-61003Vibration KitModel: 8182 Cab TiltOEM#: 44-74, 9343-6223, 4866KL3003, 4866-KL3003GAFF: 12035AM: M1K2Pad Height: 1/4”Pad Width: 1-3/8”Pad Length: 2-1/4”Rivet: 3/16” Diameter x 1/2”Qty Per Vehicle: 2Contains: (4) Pads (4) Blind Rivets
NOTE: • ATRO’s Vibration Kit is made with our Genuine Polyurethane which lasts
longer than rubber or other polyurethanes • The polyurethane formulation used for this part absorbs shock and
dampens vibration• ATRO’s price on this kit is very competitive
ATRO High Temperature engine mounts perform in the extreme conditions of EGR/SCR engine systems. The ATRO HT formula is the only high temperature resistant polyurethane in the marketplace and greatly exceeds the performance of rubber. These high temperature motor mounts resist scorching heat, retain their form, consistency and elasticity while reducing vibration in the cab and helping prevent sudden load shifts.
NOTE: Big Problem on newer Peterbilt trucks• ATRO’s proprietary polyurethanes lasts 3 to 5 times
longer than rubber.• ATRO’s polyurethane are impervous to Oil, Grease,
Cleaning Solvents, Diesel Fuel, Hydraulic Fluid and Road Salt & Brine.
• This product uses an ATRO polyurethane with shock absorption qualities, making for smoother ride and longer life of components.
- Page 10 -
PETERBILT COMPONENTS
HM75-64726Hood Mount Pivot BushingModel: 357, 367, 377-379OEM#: 13-04726, 13-04727AM: M13472Length: 1-11/16”ID: 3/4”Small OD: 1”Large OD: 1-11/16”Sleeve ID: 5/8”Sleeve Length: 1-7/8”
NOTE: Both Sleeve and Bushing in Kit
HM75-65711Hood BumperModel: 385OEM#: 13-04711GAFF: 12364AM: M13353, M13353UBInside Height: 1-9/16”Outside Height: 2”Inside Width: 2-1/4”Outside Width: 3-1/8”Inside Length: 2”Outside Length: 2-3/8”Qty Per Vehicle: 2
KT75-61257Cab/Sleeper Mount KitModel: 357, 365, 378, 379, 385, 389OEM#: 20-08257, 20-08867 GAFF: 12360Bushing Height: 1-1/8”Bushing ID: 21/32”Bushing Large OD: 3”Nipple OD: 1-13/16” Contains: (2) CM75-61257 (2) Flat Washers (1) Nut (1) Inner Sleeve (1) Bolt
MM00-62000Engine Mount Kit, FrontModel: MultipleOEM#: LOR SSB33 1000 2, SSB33-1000-2 ID: 3/4” BoltOD: 3”Thickness: 13/16”Qty Per Vehicle: 2Contains: (2) Engine Mounts (1) Spacer Sleeve
NOTE: Polyurethane does not corrode like rubber
HL00-64001Hood LatchOEM#: 161037, 1304339, 23-13857, L56-001, 680880160GAFF: 1323611103AM: HLK1089, HLK1035Length: 8-3/4”Qty Per Vehicle: 2
HM75-64593Hood RollerModel: 357, 357-379OEM#: 13-03593GAFF: 12363Length: 1-5/8”ID: 5/8”OD: 1-1/2”Qty Per Vehicle: 2
The physical properties of ATRO’s Polyurethane are so superior that rubber simply can’t compete. This is true for many truck components and applies to Hood Latches, in particular, because:
• Hood Latches are exposed to the elements – Polyurethane is not affected by chemical attack.
• The quality of rubber fluctuates – ATRO polyurethane is consistent.
• Repeated use causes rubber hood latch straps to break.
• ATRO Polyurethane has 3 times the tear strength of rubber.
MM75-62597Engine Mount Kit, FrontModel: 320OEM#: 05-17597Length: 1-13/16” SpacerID: 1/2” OD: 2-5/8”Thickness: 13/16”Contains: (2) Mounts Bushings (1) Spacer Sleeve
- Page 11 -
PETERBILT COMPONENTS
TR75-41108Torque RodOEM#: 03-05108, 943711GAFF: 12398AM: TMR532; TMR532BDayton: 345-215Length: 25-9/16” c-c Bushings: TS38000/TS38000Qty Per Vehicle: typically 2
TR75-41327Torque RodOEM#: 03-04327, 924175, C65-6012-000010440, C65-6016-000010440, C65-6024-000010440, C65-6026-000010440, SS326-11GAFF: 12395AM: TMR520, TMR549Dayton: 345-211, 345-240Length: 17-5/16” c-c Bushings: TS38000/TS38750Qty Per Vehicle: typically 2
MISCELLANEOUS WASTE HAULER COMPONENTS
TR75-41059Torque RodOEM#: 03-04059, 03-02439, C65-6013, SS219-117, C6560256000000581, C65-6025-000000581GAFF: 13694AM: TMR518Dayton: 345-210Length: 22-7/8” c-c Bushings: TS38000/TS38000Qty Per Vehicle: typically 2
BP99-65535Bumper/Arm StopModel: Heil Half PackOEM#: 01411535AM: 562.6127Height: 2-13/16”Width: 4-1/2”Length: 9-7/8”Bolt Hole: 5/8”Bolt Holes 5” c-cQty Per Vehicle: 4
MS99-65035Bumper PadModel: Heil, Leach, McNeilus Hydralic Arm Bumpers OEM#: 0602035GAFF: 18905AM: 562.612Height: 3”Width: 6”Length: 7-7/8”Bolt Hole Pattern: 5-1/2”x3”x1/2”Qty Per Vehicle: 2
NOTE: Outlasts rubber 2-5 timesMS99-65045Bumper Pad, Severe DutyModel: Heil, Leach, McNeilus Hydralic Arm BumpersOEM#: 0602035AM: 562.6120HDUBHeight: 3”Width: 6”Length: 7-7/8”Bolt Hole Pattern: 5-1/2”x3”x1/2”Qty Per Vehicle: 2
NOTE: Severe Duty
Today’s typical rubber bumpers do not last very long and may be worn out in six to twelve months.
ATRO’s polyurethane bumpers have been proven to last as much as 15 times longer than rubber.
ATRO torque rod bushings feature chemically resistant polyurethane for long life of the bushing.
The bushings also feature a rotating
pin design eliminating bushing wind up and making for easier installation.
- Page 12 -
MISCELLANEOUS WASTE HAULER COMPONENTS
MS99-69717Grabber Assembly RollerModel: Heil, McNeilus Waste Can GrippersOEM#: 0620717, 1108125ID: 1/2”OD: 2-1/2”Length: 1-7/16”Contains: (1) Roller Bushing (2) WashersQty Per Vehicle: Varies
MS99-69779Bumper PadModel: Curotto Can Hydralic Arm BumpersOEM#: 1238779, AC02-036Width: 2”Length: 3-1/4”Thickness: 13/16”
NOTE: No Warranty
MS99-69780Bumper PadModel: Curotto Can Hydralic Arm BumpersOEM#: 1238780, AC02-034Width: 4”Length: 10”Thickness: 11/16”
NOTE: No Warranty
MS99-69804Roller GripperModel: Heil Waste Can GrippersOEM#: 062804, 0620805(takes 2)OD: 2-1/2”Length: 2”ID Bolt Size: 5/8”Qty Per Vehicle: Varies
NOTE: These pads are super high wear items, with rubber being replaced 2-3 times a year. Individual pads are available.
MS99-69013Gripper Pad Kit w/HardwareModel: Labrie Waste Can GrippersOEM#: BCB01485 (pad only)Contains: (12) MS99-69012 Pads (24) Bolts, 3/8” x 1-1/4” (24) Locknuts, 3/8” (24) Flat Washers, 3/8”Qty Per Vehicle: 1
MS99-69718Gripper RollerModel: AmrepOEM#: 1451717ID: 1/2” (1/2” Bolt)OD: 2-1/2”Length: 4”
MS99-69720Gripper Pad, Small RoundModel: AmrepOEM#: 1451720ID: 1/2” (1/2” Bolt)OD: 4”Thickness: 1-1/16”
NOTE: Metal washer molded in
MS99-69727Gripper Pad, Large RoundModel: AmrepOEM#: 1451727ID: 1/2” (1/2” Bolt)OD: 5-3/4”Thickness: 1-1/16”
NOTE: Metal washer molded in
- Page 13 -
MISCELLANEOUS WASTE HAULER COMPONENTS
PB00-26839Lift Axle Bushing KitModel: Hendrickson, Watson ChalinOEM#: R008839, SRK1190-1AM: TRK8839WDayton: 339-277Qty Per Vehicle: 1Contains: (16) PB00-36314 Bushings (8) Inner Sleeves (8) Bolts, 3/4” x 5” (8) Locknuts (16) Washers
CR00-67121Carrier Bearing AssemblyModel: Spicer 1710 SeriesOEM#: 210121-1XGAFF: 40075Assembly Dimensions:Height: 6-5/16”Width: 2-1/4”Length: 9-1/4”Bearing Dimensions:ID: 50mmCenter Height: 2-25/32”Bolt Holes: 7-5/8” c-cBolt Size: 1/2”Qty Per Vehicle: 1
CR00-67825Carrier Bearing AssemblyModel: Spicer 1810 SeriesOEM#: 2106611-1XGAFF: 40074Assembly Dimensions:Height: 7-1/4”Width: 3”Length: 10”Bearing Dimensions:ID: 60mmCenter Height: 3-1/4”Bolt Holes: 8-5/8” c-cBolt Size: 1/2”Qty Per Vehicle: Varies
CARRIER BEARING ASSEMBLY NOTES:• Remove & do not reinstall the OE dust shield. • Reusing the OE shield can cause noise & installation issues. • Thoroughly clean all mating surfaces prior to reassembly.• Hand tighten bolts to hold carrier bearing in place prior to torqueing to
manufacturers specifications (varies by application)
WITH ATRO BEHIND YOU, DRIVE FORWARD.
ENGINEERED
TO LASTATROBUSHING.COM
- Page 14 -
COMING SOON
SELF CENTERING CR00-67661
Carrier Bearing Assembly