warranty programs - iko · iko l&m warranty program for built up roofing surfacing flashings 5...
TRANSCRIPT
Diamond Shield
L&M
WARRANTY PROGRAMSC O M M E R C I A L R O O F I N G
MM1L189 Diamond Shield Warranty Brochure_1213.indd 1 13-12-30 11:37 AM
IKO L&M WARRANTY PROGRAM FOR BUILT UP ROOFING
SURFACING FLASHINGS
5 Year
4 Ply No. 15 Single Pour2 Ply Mod-Bit
3 Ply No. 15 & 180 or 250 Cap4 Ply No. 15
10 Year
4 Ply No. 15 Single Pour 2 Ply Mod-Bit
4 Ply Type IV Single Pour 2 Ply Mod-Bit
4 Ply Type 6 Single Pour 2 Ply Mod-Bit
15 Year
1 Ply 95 or 180 & 3 Plies Type IV Single Pour 2 Ply Mod-Bit
1 Ply 95 or 180 & 3 Plies Type 6 Single Pour 2 Ply Mod-Bit
20 Year
1 Ply 180 & 4 Plies of Type IV Single Pour 2 Ply Mod-Bit
1 Ply 180 & 4 Plies of Type 6 Single Pour 2 Ply Mod-Bit
** Flashings are 2 Ply Polyester or Composite
IKO L&M WARRANTY PROGRAM FOR MOD-BIT ROOFING
BASE SHEET CAP SHEET
10 Year
95 180 or 250 or ArmourCool or Prevent or HD Cap
180 180 Base with Pour & Gravel
15 Year
180 250 or ArmourCool or Prevent or HD Cap
HD 250 or ArmourCool or Prevent or HD Cap
Fast-N-Stick 250 or ArmourCool or Prevent or HD Cap
ArmourBond (Flash or 180) 250 or ArmourCool or Prevent or HD Cap
ArmourVent 250 or ArmourCool or Prevent or HD Cap
Cold Gold Base 250 or Prevent
20 Year
180 250 (5.0) or ArmourCool or Prevent or HD Cap
HD 250 (5.0) or ArmourCool or Prevent or HD Cap
Fast-N-Stick 250 (5.0) or ArmourCool or Prevent or HD Cap
ArmourBond 180 250 (5.0) or ArmourCool or Prevent or HD Cap
** Flashings are 2 Ply Polyester or Composite
Limited Labour and Membrane
Warranty (L&M)
This limited warranty is applicable to
commercial systems installed by an
IKO Registered Roofing Contractor
on commercial / industrial buildings.
The L&M is not pro-rated and covers
manufacturing defects resulting in
roof leaks and has a non-prorated
labour inclusion for IKO to pay for the
repair / replacement of the defective
material. To obtain an L&M warranty the
contractor must be an IKO Registered
Roofing Contractor and possess current
liability insurance. The contractor
should completely fill-out the limited
warranty application and submit it to
IKO Technical Services / Commercial
Warranties for processing.
MM1L189 Diamond Shield Warranty Brochure_1213.indd 2 13-12-30 11:37 AM
IKO DIAMOND SHIELD WARRANTY PROGRAM FOR BUILT-UP ROOFING
SURFACING FLASHINGS
10 Year
4 PlyType IV Single Pour 2 Ply Mod-Bit
4 Ply Type 6 Single Pour 2 Ply Mod-Bit
15 Year
1 Ply 95 or 180 & 3 Plies Type IV Single Pour 2 Ply Mod-Bit
1 Ply 95 or 180 & 3 Plies of Type 6 Single Pour 2 Ply Mod-Bit
20 Year
1 Ply 180 & 4 Plies Type IV Single Pour 2 Ply Mod-Bit
1 Ply 180 & 4 Plies of Type 6 Single Pour 2 Ply Mod-Bit
** Flashings are 2 Ply Polyester or Composite
IKO DIAMOND SHIELD WARRANTY PROGRAM FOR MOD-BIT ROOFING
BASE SHEET CAP SHEET
10 Year
95 180 or 250 or ArmourCool or Prevent or HD Cap
180 180 Base with Pour & Gravel
15 Year
180 250 or ArmourCool or Prevent or HD Cap
HD 250 or ArmourCool or Prevent or HD Cap
Fast-N-Stick 250 or ArmourCool or Prevent or HD Cap
ArmourBond (Flash or 180) 250 or ArmourCool or Prevent or HD Cap
ArmourVent 250 or ArmourCool or Prevent or HD Cap
Cold Gold Base 250 or Prevent
20 Year
180 250 (5.0) or ArmourCool or Prevent or HD Cap
HD 250 (5.0) or ArmourCool or Prevent or HD Cap
Fast-N-Stick 250 (5.0) or ArmourCool or Prevent or HD Cap
ArmourBond 180 250 (5.0) or ArmourCool or Prevent or HD Cap
** Flashings are 2 Ply Polyester or Composite
Diamond Shield Limited Warranty
The Diamond Shield Limited Warranty
is applicable to commercial systems
installed on a commercial / industrial
building by an IKO Registered Roofing
Contractor with current liability
insurance. The Diamond Shield Warranty
is not pro-rated and covers repair or
replacement of the IKO commercial /
industrial roofing products without
cost to the Owner. Please refer to the
Diamond Shield Limited Warranty or
contact your local IKO representative
for information on the supporting
documentation required for warranty
issuance. A Diamond Shield Limited
Warranty is assessed a fee based on
roof size and warranty term requested.
Please refer to a sample copy of the
Diamond Shield Limited Warranty for
further information.
Note: The coverage is not prorated. (reference Canadian Commercial & Industrial Limited Warranty
Chart for details) The Diamond Shield application should be sent to IKO at least two weeks prior to
job commencement and include a copy of the roof schematic, roof details (flashings, penetrations etc.)
and written specification to ensure that the proposed system complies with IKO requirements.
DIAMOND SHIELD WARRANTY FEES
TERM FEES
5 Years $ 0.06 / sq.ft. min. $ 600.00
10 Years $ 0.11 / sq.ft. min. $ 900.00
15 Years $ 0.15 / sq.ft. min. $ 1,200.00
20 Years $ 0.20 / sq.ft. min. $ 2,000.00
MM1L189 Diamond Shield Warranty Brochure_1213.indd 3 13-12-30 11:37 AM
Thank you for considering IKO Premium Roofing products.
For additional information on IKO’s full line of superior Commercial/Industrial Roofing and Waterproofing products
please call: 1-855-IKO-ROOF (1-855-456-7663), or visit our web site at: www.iko.com
Note: The information in this document is subject to change without notice.
IKO assumes no responsibility for errors that may appear in this document.
© Copyright 12/13 · MM1L189
IKO offers a range of commercial roofing warranties from pro-rated Limited Material Warranties
to Diamond Shield Limited Warranties which cover materials and workmanship.
The Limited Material Warranty is obtainable through dealers, and only requires the contractor’s
signature to be valid.
The Limited Labour and Membrane Warranty and the Diamond Shield Limited Warranty require
the contractor’s company to be an IKO Registered Roofer. Information on registration procedures
and required training programs can be obtained from your roofing products distributor, or your
IKO Representative.
Please ask your IKO Technical Service Manager for specific information and processing details for the
level of warranty coverage you require.
Correspondence and questions should be directed to:
IKO Technical Services
Commercial Warranties
80 Stafford Drive, Brampton, ON
Phone: 1-888-766-2468
email: [email protected]
IKO Commercial Roofi ng Warranties:
Application for Limited Diamond Shield Warranty
1. ___________________________________________________________________________ Ph. ______________________________ 2. __________________________________________________________________________________ ____________________________ 3. ____________________________________________________________________________ 4. _____________________________________________________________________ __________________ 5. _____________________________________________________________________ ______________________________ 6. __________________________________________________________________________________ _____________________________ 7. _______________________________________________________________________________________________________________ 8. _____________________________________________________________________________________________________________ 9. __________________________________________________________________________________________________________________ 10. ______________________________________________________________________________________________________ 11. _________________________________________________________________________ ______________________________ 12. ___________________________________________________________________________________ _____________________________ 13. __________________________________________________________________________ _____________________________ 14. __________________________________________________________________________________ _______________________________
15. __________________________________________________ _____________________________________ _______________________________________________________ ______________________________
New Construction Re-cover (no tear-off) Complete tear-off Partial tear-off (explain with cover letter)
Steel Structural Concrete Wood Plank Plywood Other: _________________ Gauge, PSI, Thickness: __________________
Fibreglass Perlite Fibreboard Isocyanurate Other (specify): _____________________ Thickness: __________________
: EPDM BUR ( gravel smooth) Coal Tar Pitch Mineral Cap Sprayed Urethane Other (specify) __________________
_______________________________ None IKOTherm None ________________ _____________________________________________________________________________________________
Isocyanurate Expanded Polystyrene Fibreglass Perlite Extruded Polystyrene Composite Type X Gypsum
Other (specify): ______________________________________________________________ CoverShield Protectoboard None
Manufacturer ___________________________________ Fibreboard Perlite Fibreglass Other (specify) _______________
(if applicable): Asphalt Adhesive Mechanically Fastened (accepted fasteners) Fastening Rate: _____________________
Attachment (if applicable): Asphalt Adhesive Mechanically Fastened (accepted fasteners) Fastening Rate: ____________________
_____________________________ __________________________ ____________________ IKO Other (specify) __________________________________ Type I Type II Type III
________________________________________________________________ _______________________________________________________________________________________________________________
(e.g. Modiflex MF-95-FS): _________________________________________________________________________________________ (e.g. Type IV Glass Ply): ______________________________________________________________________________________ (e.g. Torchflex TP-250-CAP): ___________________________________________________________________________________
(e.g. Armourbond Flash): ______________________________________________________________________________________________ (e.g. Torchflex TP-180-CAP): ____________________________________________________________________________________________
: Manufacturer: __________________ Type: _________________ ___________________ lbs./sq. ft. ______________ (MGR) (Size and number): _________________________________________________________________________________
43. Other products used, not listed above (eg. Primers, bitumen, cafts, etc.): ____________________________________________________________________ I understand that this warranty will be null and void if any of the information above is inaccurate. By signing this application form, I hereby acknowledge that I have read, understood, and complied with the terms and requirements of the IKO Limited Warranty being applied for. I further acknowledge that for DSLW’s I am responsible for any workmanship deficiencies occurring in the initial 2 years of warranty coverage, and all workmanship deficiencies for all other IKO warranties.
Officer: ____________________________________ Date: ______________________________________ IKO Sales Rep: _____________________________ Roof Accessibility: No Ladder Needed Ladder at Job Site Ladder will be provided by roofing contractor
Project Starting Date: ___________________ Approximate Project Completion Date: ____________________ Warranty Period applied for: __________________ mm/dd/yyyy mm/dd/yyyy years
MM1L189 Diamond Shield Warranty Brochure_1213.indd 4 13-12-30 11:37 AM