warehouse safety & osha regulations
TRANSCRIPT
Warehouse Safety & OSHA RegulationsAK Material Handling Systems 8630 Monticello Ln N Maple Grove, MN 55369
More than
145,000people work in over
7,000warehouses
Image Source: Business Solutions
IMAGINETHE
INJURIES?
TOP3CAUSES OF INJURY
• DOCKS• FORKLIFTS
• CONVEYORS
DOCK
SHAZARD: Injuries can happen when forklifts are driven off the dock, or
product/equipment falls on employees.
SOLUTIONS
Drive forklifts slowly on docks
Secure dock plates, checking capacities
Keep clear of dock edges
Provide visual warnings near dock edges
100 killed &95,000 injuredEVERY YEAR
while operating forklifts
SOLUTIONSProperly maintain equipment
Before use, examine machinery
Follow procedures for pickup
Maintain safe clearances for aisles
CONV
EYO
RSHAZARD: Workers can be caught in between
“pinch points”, hit by falling products, or develop musculoskeletal disorders by
repetitive postures or motions.
SOLUTIONS
Constantly inspect conveyors
Check that pinch points are protected
Train employees on conveyor procedures
Maintain proper lighting around area
Image Source: Google Images
PREV
ENTI
ON EDUCATE
On proper safety measures
TRAIN Workers on warehouse equipment
ESTABLISH A communication system between employees
ENSURE Fire, lockout, and equipment
procedures are in place
If you don't follow the rules…
IT WILL COST YOU
$38,000
$150,000direct costs
indirect costs
QUICK TIPS
ENSURE…
• Floors are swept, aisles are clear
• Lifting is done correctly, avoiding repetitive movements
• Ladders are inspected before use
• Hazard zones are clearly marked
• All employees are alert when working with and next to machinery
SAFETYisn’t an option,
it’s the
LAW
Occupational Safety and Health Administration
Image Source: Google Images
10TOP
CITATIONSNEXT…
TOP
101. Forklifts
2. Hazard Communication
3. Electrical, wiring methods
4. Electrical, system design
5. Guarding floor & wall openings and holes
6. Exits
7. Mechanical power transmission
8. Respiratory protection
9. Lockout/tagout
10. Portable fire extinguishers
CITATIONS
COMMON CODES:1926.250(a)(1) All materials stored in tiers shall be stacked, racked, blocked, interlocked, or otherwise secured to prevent sliding, falling or collapse.
1926.250(a)(2) Maximum safe load limits of floors within buildings and structures, in pounds per square foot, shall be conspicuously posted in all storage areas, except for floor or slab on grade. Maximum safe loads shall not be exceeded.
1926.250(a)(3) Aisles and passageways shall be kept clear to provide for the free and safe movement of material handling equipment or employees. Such areas shall be kept in good repair.
1926.250(a)(4) When a difference in road or working levels exist, means such as ramps, blocking, or grading shall be used to ensure the safe movement of vehicles between the two levels.
Image Source: Google Images
A Little Help From Our Friends
http://www.kokeinc.com
http://www.osha.gov
http://images.google.com
FOR QUESTIONS, DESIGN, CONSULTATION, PALLET RACK SYSTEMS
763-493-5015
8630 Monticello Ln N Maple Grove, MN 55369
THANKS FOR READING