walplast products pvt. limited
TRANSCRIPT
Presented by-Subham Kumar Ghosh
Introduction
It is established in 2004 It is an ISO certified company Walplast have 6 manufacturing unit in all over India It is the highest manufacturing wallputty company It is a fastest growing company in wallputty passionate about quality and innovation
Products
Ready mix plaster Tile adhesive Masterplast
Ready mix Plaster
It is plaster which is ready to use at site by just mixing water.
It helps to eliminate job site mixing practices.
It is useful for both interior as well as exterior walls.
It provides protection against penetration of rainwater and other atmospheric change
Ready mix Plaster
Ingredients 4 type of sand1. 0 – 0.5mm2. 0.5 – 1mm3. 1 – 2mm4. 2 – 3.5mm Grey cement Polymers
Ready mix Plaster
Features and Benefits Compact plaster, reduce void gap Negligible silt content Reduces rebounding loss Cuts the repair and maintenance cost Paint finish wall Increases workability
Ready mix Plaster
Preparation , Mixing , Application
7-8 litre of water for 40 kg bag 4-5 mintues mixing , wait for 2-3 minutes and remix
again and it is ready for use Use steel trowel or wooden float for optimum bonding
Ready mix Plaster
Coverage 10-12mm light weight blocks is 17-18 sq.ft 10-12mm brick wall is 14-15 sq.ft 18mm light weight blocks is 11 sq.ft 25mm brick wall is 7- 7.5 sq.ft 10mm RCC is 20-22 sq.ft Pot life is 90 mins Intial setting time is 30 mins and final setting time is 600 mins
Tile Adhesive
It is ISI certified tile adhesive product Is available in 3 categories1. Silver star2. Gold star 3. Platinum star It contains high performance polymer
Tile Adhesive
Ingredients Highest grade of graded sand Grey cement for silver and gold star tile adhesive white cement for platinum star tile adhesive Polymers Selective fillers Chemical additives
Tile Adhesive
Features and benefits Excellent bonding to the base plaster which gives better
workability and durability Water resistant which is suitable for both interior and
exterior wall Can be used on new as well as old wall and floors Consistent work quality
Tile Adhesive
Application & Mixing and Preparation Silver Star and Gold star for 20 kg bag 5-5.5 litre water Platinum star requires 6-6.5 litre water for 20 kg bag Silver star is also available in 40 kg bag which require 10-
11 litre water Mix the content till it become lump free wait for 5 mins
and remix again for 2 mins and it is ready to use Use a steel trowel / blade to apply the mix Use a notched trowel to remove excess material, which is
6mm brush size.
Tile Adhesive
Coverage and Technical detail Open time 20 mins Adjustability time 5-15 mins Pot life 30 mins Initial setting time 30 minute Setting time 24 hours 2-3 sq.ft/kg for 3mm thickness
It is chemically active agent that improves the water retention
It creates smooth surface and it helps in to spread plaster easily
It helps to reduce cracks due to quality in built fibres
Ingredients and Application Lime and high quality polymers 500 gm pouch for 50 kg cement
Features and Benefits Excellent workability Optimum drying time Increase bond strength of mortar Easy spreadability Reduces re-bonding losses Reduces crack formation
Why us ?
Timely delivery Passion for innovation & Quality Transparent business policies Cost-effective prices Well trained professionals A long list of satisfied clients
Contact us
Walplast Prtoducts Private Limited
Rainbow Building ,plot no. 13,sector-24,Near Shikara Hotel,Opposite Sanpada Railway
station ,Turbhe Naka ,Vashi,Navi Mumbai,
Maharashtra -400705,india
www.walplast.co.in
THANK YOU