wallpod: ev ready - niceicrolec’s new wallpod: ev ready unit provides the builder with the low...
TRANSCRIPT
Electric vehicle sales are growing at an unprecedented
rate and planning permissions are increasingly
stipulating that new residential homebuilds
must consider and make provision for an
electric vehicle charging point.
Rolec’s new WallPod: EV Ready unit
provides the builder with the low cost
future proof solution that, as well as
charging an EV in Mode 2 format,
doubles up as an outdoor IP65
rated domestic 13amp
maintenance socket.
WallPod: EV Ready Features
EV
EVEurope’s largest range of EV charging solutions – Join the olution
• Europe’s largest range of charging points, leads and accessories • A huge product gallery • Company and industry news, helpful hints, advice and general information
Click here to visit our websitewww.rolecserv.com to view:
WallPod: EV ReadyThe low cost Electric Vehicle (EV) charging point for the new homebuild
✔ Satisfies Planning requirements for EV charging
✔ Costs from as little as £70.00 + VAT
✔ Doubles up as an outdoor rated 13amp maintenancesocket ideal for home/garden maintenance, chargingmobility scooters and electric bikes, etc.
✔ Charges the EV in Mode 2 format
✔ Is designed to be future proof and easily upgradableto full Mode 3 fast charging format (upgrade kitsavailable throughout the UK wholesaler network)
✔ Includes overload and fault current protection (RCBO)
✔ This modern, attractive unit is available in a variety of colours including brick-matchingterracotta/brown
✔ Can be surface or cavity mounted
✔ Has been certificated by the BSI as safe to use in the domestic environment
✔ Easy to install and maintain
www.rolecserv.com
• Warm white base unit (other colours available upon request)• Green service pods (other colours available upon request)• IP65 Category 1 weather proof rating to BS EN 60529 Certification• BSI Certificated to BS EN 60335-1 for safe home use • Manufactured in compliance with BS7671 Wiring Regulations• Compliant with IET EV regulations• Corrosion resistant• Operating temperature: - 30C to +50C• Glow wire rating tested to IEC 60695-2-13• Flame retardant to UL94 flame rating at V2 for 1.5mm and 3.0mm
• 13amp domestic socket protected by an IP65 rated access door• Built-in 16amp, 30 mA RCBO accessible via an IP65 rated access
door providing overload and fault current protection• 230V AC/50Hz • Full internal wiring – ready to install
• Optional access door locking facility• Optional built-in Class 1 kWh meter• Optional built-in time clock for electricity management• Optional corporate branding (colours, logo badge, etc.)• Alternative mounting solutions (wall plate, post, plinth, etc.)
• Electrical key switch control
Mechanical
SPECIFICATIONS
Electrical
Product codes:EVWP0020
Options
Payment & AccessOptions
WallPod EVPower Solutions
Accessories
Six divisions of Rolec Services Ltd
EV
Head office contact:t: ++44 (0) 1205 724754f: ++44 (0) 1205 [email protected]
Rolec Services LtdRalphs Lane, Frampton WestBoston, LincolnshireUK, PE20 1QU
EVWPD001 Photos / images are not contractual © copyright 2015
WallPod: EV ReadyThe low cost Electric Vehicle (EV) charging point for the new homebuild