wall mounting dimensi inverter
DESCRIPTION
How to install InverterTRANSCRIPT
I nverter/Charger lnstallation
Wallstud
152 cm from floor putsthe inverter informationpanel at approx. 1 65 cm
(optional) .----______
studs 400 mm on centernd wallboard
Side View
Locate the wall studs.
lf necessary, enhance the support surface with a 20 mm plywood panel secured tothe wall studs. The plywood should span at least three wall studs.
Use hardware (not provided) sized to support the weight of the equipment tosecure the plywood to the wall.
Using a level, secure the first mounting bracket to the wall. Use recommendedanchoring hardware to secure the plate (see Table 2-1).
Mount the next bracket adjacent to the first one. The brackets are designed tointerlock, so additlonal mounting brackets are easily installed without additionalmeasuring or levelling.
Wdlbehi
"/
ooo@
oFigure 2-3 Mounting the Bracket for the Xantrex XW lnverter/Charger or Distribution Panel
Multiple mounting plates should fit together asshown.
24This manual for use by qualified personnel only
975-0384-01-02