wafer, lug and double flanged type - global valve center · · 2012-11-20series 650 tripple...

DocumentRevisionYear

: PG600: 1: 2011

Tripple Eccentric Butterfly Valves

Product Group 600

www.globalvalvecenter.comProvided data is not contractual, data may be changed without notice. All rights reserved Global Valve Center b.v.

Wafer, Lug and Double Flanged Type

2011

Triple eccentric metal seated butterfly valves are widely used in

plants and high pressure piping system.

The seat construction consists of a laminated or solid metal seat.

The valve is capable of bi-directional flow and bubble tight shut-off at full rated pressure.

AVAILABLE SERIES

STANDARD COMPLIANCE

PRODUCTION RANGE

APPLICABLE FLANGE

Series 610 Tripple Eccentric Wafer Type Metal Seated Butterfly Valve

Series 640 Tripple Eccentric Lug Type Metal Seated Butterfly Valve

Series 650 Tripple Eccentric Double Flanged Type Metal Seated Butterfly Valve

Face to face dimensions in accordance with API 609, EN 558, ISO 5752,

DIN 3202, MSS-SP-68

Certified Fire Safe Design in accordance with API 607, API 6FA and BS 6755

Size range DN 50 (2") ~ DN 2000 (80")

Process Connections to ASME B16.5 / B16.47 Class 150~900 Lbs, DIN PN 10~PN 63

Working Temperature range -253°C to +815°C

Working Pressure Maximum 153 Barg (2220 psi)

ASME B16.5 / B16.47, 150-300-600-900#, BS 3293

EN 1092 / DIN 2501, PN 10, 16, 25, 40, 63

Description Product Group 600 Butterfly Valves

Wafer Type Lug Type Double Flanged Type

Series 610 Series 640 Series 650


: PG600: 1: 2011


Product Group 600

Page 1 www.globalvalvecenter.com 2011Provided data is not contractual, data may be changed without notice. All rights reserved Global Valve Center b.v.

RETAINER

GASKET

METAL

SEAL RING

Product Group 600 metal seated high pres-

tight shut off using tripple eccentric disc geometry.The valve shaft is off set against the seat and thecentre line of the valve body.

The seating edges are machined with a continuously

changing slope from an angle on top of the ovalseat ring to an angle at the opposite side. Thisgeometry ensures that the seat ring stays clear ofthe seat except at the final shut off position whichresults in long life seat.

Various disc seals are available to comply witheach temperature and pressure serviceapplications. Solid metal seals are often used fortemperatures above 510°C and up to 815°C orlow temperature service. The laminated metalseal consisting of stainless steel with intermediatematerial of graphite or ceramic fiber layers isused widely. The laminated seal is secured to thedisc with a bolt-on stainless steel clamp ring, andeasily accessible for replacement. The graphitelaminated seal is suitable for temperturesbetween -40°C and 650°C in general. The seal leakage meets API 598 or API 6D.The solid metal seating valve can be operated ina temperature range of -253°C to +815°C.Valves for cryogenic applications will be executedwith an extended stem.

sure butterfly valves provide bi-directional bubble

Triple eccentric design principle

Metal to metal seat

Design Principle & Seat Configurations


: PG600: 1: 2011


Product Group 600

www.globalvalvecenter.com 2011

Provided data is not contractual, data may be changed without notice. All rights reserved Global Valve Center b.v.

LAMINATED SEAT SOLID SEAT

Petroleum refinery Nuclear power plants Fossil power plants Cryogenic services Petrochemical plants Exhaust gas line & Steam lineFire safe line

In general the following operation possibilities are available.

Manual operation, handlever or gearbox.

Hydraulic actuators.

Pneumatic actuators.Electric actuators.

P.NO.

1

2

3

3.1

3.3

4

5

6

7

9

11

12

13

15

41

42

58

43

71

PART NAME

BODY

DISC

SEAT

BODY SEAT

BODY SEAT GASKET

STEM

DISC PIN

RETAINER

PACKING GLAND

BOTTOM COVER

STEM BEARING

PACKING

THRUST PLATE

BOTTOM GASKET

RETAINER BOLT

PACKING GLAND BOLT

BODY SEAT BOLT

BOTTOM COVER BOLT

SEAT GASKET

MATERIAL

WCB, Stainless steel, NiAlBr.


316 stst +Graphite laminated,Solid stainless steel

Stainless steel

Graphite

Stainless steel, monel





Stainless steel + PTFE

Graphite

Stainless steel

Graphite

Stainless steel

A307 Gr. B (G)Stainless steelA307 Gr.B (G) Stainless steel

Graphite

Series 610 Wafer To be installed between flanges using long bolts.Valve body with centering lugs for easy installation.

Series 640 Lug To be installed between flanges. Valve body with fullpattern threaded bolt holes, suitable for end-of-line service.

Series 650 Double flanged To be installed between flanges. Valve body with 2complete flanges suitable to connect with pipe flanges.Suitable for end-of-line service.

Application in major industries

Classification by Connection

Operations

Construction and material

PG 600 butterfly valves have the following approvals, certification.

CE / PED.

BV, DNV, LRS type approvals.

Approvals, Certification


: PG600: 1: 2011


Product Group 600

www.globalvalvecenter.com 2011Provided data is not contractual, data may be changed without notice. All rights reserved Global Valve Center b.v.

2"

2.5"

3"

4"

5"

6"

8"

10"

12"

14"

16"

18"

20"

22"

24"

SIZE

WAFER(inch)

LUG(inch)

mm

2"

2.5"

3"

4"

5"

6"

8"

10"

12"

14"

16"

18"

20"

22"

24"

26"

28"

30"

32"

36"

40"

44"

48"

50

65

80

100

125

150

200

250

300

350

400

450

500

550

600

650

700

750

800

900

1000

1100

1200

43

46

48

54

57

57

64

71

81

92

102

114

127

154

154

165

165

190

190

203

216

240

254

118

129

141

164

187

203

223

270

308

340

381

410

444

484

509

545

568

620

645

710

770

835

895

170

177

185

200

217

240

270

320

353

390

445

490

500

535

570

635

670

695

740

805

870

930

995

12

12

12

12

12

12

17

22

27

27

27

36

36

50

50

50

50

50

61

68

68

90

90

45

45

45

45

45

45

60

60

60

75

75

100

100

100

100

100

100

150

150

150

150

180

180

F07

F07

F07

F07

F07

F07

F10

F10

F10

F14

F14

F16

F16

F16

F25

F25

F30

F30

F30

F35

F35

F35

F35

70

70

70

70

70

70

102

102

102

140

140

165

165

165

254

254

298

298

298

356

356

356

356

90

90

90

90

90

90

125

125

125

175

175

210

210

210

300

300

350

350

350

415

415

415

415

4 - 9

4 - 9

4 - 9

4 - 9

4 - 9

4 - 9

4 - 12

4 - 12

4 - 12

4 - 18

4 - 18

4 - 22

4 - 22

4 - 22

8 - 18

8 - 18

8 - 23

8 - 23

8 - 23

8 - 33

8 - 33

8 - 33

8 - 33

SQ

SQUARE

STEM

H3TYPE b

TOP FLANGE

a

Dimensions [mm]

* Flange dimensions in accordance with ASME 150#, BS PN6/PN10/PN16, DIN PN6/PN10/PN16, ISO PN6/PN10/PN16,JIS 5K/10K/16K

Wafer Class 150# Lug Class 150#

L H1 H2 N-Z

Series 610 Series 640


: PG600: 1: 2011


Product Group 600


2"

2.5"

3"

4"

5"

6"

8"

10"

12"

14"

16"

18"

20"

24"

26"

28"

30"

32"

36"

40"

44"

48"

54"

60"

72"

80"

96"

120"

50

65

80

100

125

150

200

250

300

350

400

450

500

600

650

700

750

800

900

1000

1100

1200

1350

1500

1800

2000

2400

3000

108

112

114

127

140

140

152

165

178

190

216

222

229

267

292

292

318

318

330

410

470

470

470

530

670

760

760

760

118

129

141

164

187

203

223

270

308

340

381

410

444

509

545

568

620

645

710

770

835

895

1050

1100

1230

1290

1622

2005

170

177

185

200

217

240

270

320

353

390

445

490

500

570

635

670

695

740

805

870

930

995

1200

1310

1510

1600

1950

2225

12

12

12

12

12

12

17

22

27

27

27

36

36

50

50

50

61

61

68

68

90

90

90

90

100

100

150

180

45

45

45

45

45

45

60

60

60

75

75

100

100

100

100

100

150

150

150

150

180

180

230

230

230

230

260

260

F07

F07

F07

F07

F07

F07

F10

F10

F10

F14

F14

F16

F16

F25

F25

F30

F30

F30

F35

F35

F35

F35

F48

F48

F48

F48

F60

F60

70

70

70

70

70

70

102

102

102

140

140

165

165

254

254

298

298

298

356

356

356

356

483

483

483

483

603

603

90

90

90

90

90

90

125

125

125

175

175

210

210

300

300

350

350

350

415

415

415

415

560

560

560

560

686

686

4 - 9

4 - 9

4 - 9

4 - 9

4 - 9

4 - 9

4 - 12

4 - 12

4 - 12

4 - 18

4 - 18

4 - 22

4 - 22

8 - 18

8 - 18

8 - 23

8 - 23

8 - 23

8 - 33

8 - 33

8 - 33

8 - 33

12 - 39

12 - 39

12 - 39

12 - 39

20 - 39

20 - 39

SIZE

inch mm

STEM TOP FLANGE

TYPE b aSQUARE

SQ H3

Dimensions [mm]


Double Flanged Class 150#

L H1 H2 N-Z

Series 650


: PG600: 1: 2011


Product Group 600


2"

2.5"

3"

4"

5"

6"

8"

10"

12"

14"

16"

18"

20"

22"

24"

26"

28"

30"

32"

34"

36"

40"

44"

48"

52"

54"

56"

60"

SIZE

inch mm

STEM TOP FLANGE

TYPE b aSQUARE

SQ H350

65

80

100

125

150

200

250

300

350

400

450

500

550

600

650

700

750

800

850

900

1000

1100

1200

1300

1350

1400

1500

43

46

48

54

59

61

73

83

92

117

133

149

159

171

182

182

182

210

210

223

227

245

305

308

315

315

322

329

121

137

151

176

194

223

250

290

317

365

396

435

473

490

551

579

606

661

683

708

751

770

843

914

939

960

989

1081

171

180

191

215

225

252

305

340

385

400

481

516

576

601

642

670

708

736

778

808

846

870

938

1014

1119

1220

1269

1342

12

12

12

12

12

12

17

22

27

27

27

36

36

50

50

50

50

50

61

61

68

68

90

90

90

90

90

90

45

45

45

45

45

45

60

60

60

75

75

100

100

100

100

100

100

150

150

150

150

150

180

180

230

230

230

230

F07

F07

F07

F07

F07

F07

F10

F10

F10

F14

F14

F16

F16

F16

F25

F25

F30

F30

F30

F35

F35

F35

F35

F35

F48

F48

F48

F48

70

70

70

70

70

70

102

102

102

140

140

165

165

165

254

254

298

298

298

356

356

356

356

356

483

483

483

483

90

90

90

90

90

90

125

125

125

175

175

210

210

210

300

300

350

350

350

415

415

415

415

415

560

560

560

560

4 - 9

4 - 9

4 - 9

4 - 9

4 - 9

4 - 9

4 - 12

4 - 12

4 - 12

4 - 18

4 - 18

4 - 22

4 - 22

4 - 22

8 - 18

8 - 18

8 - 23

8 - 23

8 - 23

8 - 33

8 - 33

8 - 33

8 - 33

8 - 33

12 - 39

12 - 39

12 - 39

12 - 39

Dimensions [mm]

* Flange dimensions in accordance with ASME 300#, BS PN25, DIN PN25, ISO PN20/PN25, JIS 20K.

Lug Class 300#

L H1 H2 N-Z

Series 640


: PG600: 1: 2011


Product Group 600


2"

2.5"

3"

4"

5"

6"

8"

10"

12"

14"

16"

18"

20"

22"

24"

26"

28"

30"

32"

36"

40"

48"

52"

54"

56"

60"

80"

96"

120"

SIZE

inch mm

STEM TOP FLANGE

TYPE bSQUARE

SQ H350

65

80

100

125

150

200

250

300

350

400

450

500

550

600

650

700

750

800

900

1000

1200

1300

1350

1400

1500

2000

2400

3000

193

177

180

190

210

210

230

250

270

290

310

330

350

390

390

410

430

450

470

510

550

630

650

670

680

700

1250

1250

1250

121

137

151

176

194

223

250

290

317

365

396

435

473

465

546

579

606

661

683

751

770

924

939

940

970

1081

1430

1622

2005

171

180

191

215

225

252

305

340

385

400

481

516

576

575

642

670

708

736

778

846

870

1024

1199

1200

1250

1342

1600

1950

2225

12

12

12

12

12

12

17

22

27

27

27

36

36

50

50

50

50

61

61

68

68

90

90

90

90

90

120

150

180

45

45

45

45

45

45

60

60

60

75

75

100

100

100

100

100

100

150

150

150

150

180

230

230

230

230

260

260

260

F07

F07

F07

F07

F07

F07

F10

F10

F10

F14

F14

F16

F16

F16

F25

F25

F30

F30

F30

F35

F35

F35

F48

F48

F48

F48

F60

F60

F60

70

70

70

70

70

70

102

102

102

140

140

165

165

165

254

254

298

298

298

356

356

356

483

483

483

483

603

603

603

90

90

90

90

90

90

125

125

125

175

175

210

210

210

300

300

350

350

350

415

415

415

560

560

560

560

686

686

686

4 - 9

4 - 9

4 - 9

4 - 9

4 - 9

4 - 9

4 - 12

4 - 12

4 - 12

4 - 18

4 - 18

4 - 22

4 - 22

4 - 22

8 - 18

8 - 18

8 - 23

8 - 23

8 - 23

8 - 33

8 - 33

8 - 33

12 - 39

12 - 39

12 - 39

12 - 39

20 - 39

20 - 39

20 - 39

Dimensions [mm]



a


L H1 H2 N-Z

Series 650


: PG600: 1: 2011


Product Group 600


SIZE

inch mm

STEM TOP FLANGE

TYPE bSQUARE

SQ H3

2"

2.5"

3"

4"

5"

6"

8"

10"

12"

14"

16"

18"

20"

24"

28"

30"

32"

36"

40"

50

65

80

100

125

150

200

250

300

350

400

450

500

600

700

750

800

900

1000

173

177

180

190

210

210

230

250

270

290

310

330

350

390

502

518

531

574

667

121

137

151

176

210

234

248

307

336

371

412

457

492

559

598

619

674

696

764

171

180

191

211

241

264

321

390

414

469

497

539

595

655

690

721

749

791

859

12

12

12

12

12

12

17

22

27

27

27

36

36

50

50

61

61

68

68

45

45

45

45

45

45

60

60

60

75

75

100

100

100

100

150

150

150

150

F07

F07

F07

F07

F07

F07

F10

F10

F10

F14

F14

F16

F16

F30

F30

F35

F35

F35

F48

70

70

70

70

70

70

102

102

102

140

140

165

165

298

298

356

356

356

483

90

90

90

90

90

90

125

125

125

175

175

210

210

350

350

415

415

415

560

4 - 9

4 - 9

4 - 9

4 - 9

4 - 9

4 - 9

4 - 12

4 - 12

4 - 12

4 - 18

4 - 18

4 - 22

4 - 22

8 - 23

8 - 23

8 - 33

8 - 33

8 - 33

12 - 39

Dimensions [mm]


a


L H1 H2 N-Z

Series 650


: PG600: 1: 2011


Product Group 600


SIZE

inch mm

STEM TOP FLANGE

TAPE b aSQUARE

SQ H3

2"

2.5"

3"

4"

5"

6"

8"

10"

12"

14"

16"

18"

20"

24"

28"

30"

32"

36"

40"

44"

48"

50

65

80

100

125

150

200

250

300

350

400

450

500

600

700

750

800

900

1000

1100

1200

201

205

205

205

225

230

251

270

303

330

343

378

399

479

619

661

701

784

881

978

1065

140

157

171

185

216

246

270

326

358

387

418

473

505

590

626

650

712

754

827

863

987

191

201

212

221

248

277

434

405

437

485

503

555

608

687

719

753

787

829

923

964

1089

12

12

12

12

12

12

17

22

27

27

27

36

36

50

50

61

61

68

68

90

90

45

45

45

45

45

45

60

60

60

75

75

100

100

100

100

150

150

150

150

180

180

F07

F07

F07

F10

F10

F10

F14

F14

F14

F30

F30

F30

F35

F35

F40

F40

F40

F40

F40

F48

F48

70

70

70

102

102

102

140

140

140

298

298

298

356

356

406

406

406

406

406

483

483

90

90

90

125

125

125

175

175

175

350

350

350

415

415

475

475

475

475

475

560

560

4 - 9

4 - 9

4 - 9

4 - 12

4 - 12

4 - 12

4 - 18

4 - 18

4 - 18

8 - 23

8 - 23

8 - 23

8 - 33

8 - 33

8 - 39

8 - 39

8 - 39

8 - 39

8 - 39

12 - 39

12 - 39

Dimensions [mm]

* Flange dimensions in accordance with ASME 900#, DIN PN100, ISO PN100.


L H1 H2 N-Z

Series 650


: PG600: 1: 2011


Product Group 600



: PG600: 1: 2011


Product Group 600


Inch mm 10 ° 20 ° 30 ° 40 ° 50 ° 60 ° 70 ° 80 ° 90 °

3'' 80 11 26 45 76 116 156 207 277 292

4'' 100 17 39 66 112 171 230 305 408 431

6'' 150 41 95 163 276 422 568 752 1,006 1,063

8'' 200 73 182 327 432 723 1,035 1,336 1,890 2,070

10'' 250 119 296 534 704 1,179 1,688 2,179 3,082 3,376

12'' 300 175 433 781 1,030 1,726 2,471 3,189 3,858 4,334

14'' 350 249 616 1,111 1,466 2,455 3,515 4,537 5,489 6,165

16'' 400 313 776 1,399 1,845 3,090 4,424 5,711 6,909 7,760

18'' 450 407 1,008 1,818 2,397 4,015 5,749 7,422 8,978 10,084

20'' 500 477 1,181 2,129 2,808 4,703 6,733 8,693 10,516 11,811

22'' 550 613 1,520 2,740 3,613 6,052 8,664 11,186 13,532 15,198

24'' 600 727 1,800 3,245 4,280 7,168 10,263 13,250 16,028 18,003

26'' 650 830 2,056 3,707 4,888 8,187 11,721 15,132 18,306 20,561

28'' 700 971 2,406 4,338 5,721 9,581 13,718 17,709 21,423 24,062

30'' 750 1,133 2,808 5,062 6,676 11,180 16,007 20,666 24,999 28,079

32'' 800 1,301 3,223 5,811 7,663 12,834 18,376 23,723 28,698 32,234

36'' 900 1,720 4,261 7,681 10,130 16,966 24,291 31,359 37,936 42,609

40'' 1000 2,136 5,292 9,541 12,582 21,072 30,170 38,949 47,117 52,921

Size DISC OPENING

CV Values Table

CV Values Table for PG600 Tripple Eccentric Butterfly Valves

Torque Values Table for PG600 Tripple Eccentric Butterfly Valves (Excl. Safety Factor)


: PG600: 1: 2011


Product Group 600


Inch mm 5 Barg 10 Barg 16 Barg 19.6 Barg

3'' 80 25 Nm 33 Nm 45 Nm 55 Nm

4'' 100 42 Nm 55 Nm 70 Nm 90 Nm

5'' 125 72 Nm 88 Nm 120 Nm 150 Nm

6'' 150 125 Nm 175 Nm 240 Nm 285 Nm

8'' 200 272 Nm 315 Nm 380 Nm 475 Nm

10'' 250 350 Nm 488 Nm 600 Nm 745 Nm

12'' 300 475 Nm 660 Nm 1,000 Nm 1,270 Nm

14'' 350 670 Nm 940 Nm 1,390 Nm 1,770 Nm

16'' 400 885 Nm 1,250 Nm 1,885 Nm 2,380 Nm

18'' 450 1,070 Nm 1,850 Nm 2,480 Nm 3,150 Nm

20'' 500 1,515 Nm 2,340 Nm 3,200 Nm 4,100 Nm

22'' 550 1,880 Nm 2,950 Nm 4,360 Nm 5,600 Nm

24'' 600 2,430 Nm 3,570 Nm 5,360 Nm 6,700 Nm

26'' 650 2,900 Nm 3,850 Nm 5,770 Nm 7,190 Nm

28'' 700 3,100 Nm 4,350 Nm 6,900 Nm 8,300 Nm

30'' 750 3,445 Nm 5,600 Nm 8,900 Nm 10,880 Nm

32'' 800 3,900 Nm 6,400 Nm 10,100 Nm 12,580 Nm

36'' 900 4,800 Nm 8,000 Nm 14,400 Nm 17,900 Nm

40'' 1000 6,000 Nm 10,300 Nm 18,500 Nm 23,000 Nm

Size Working Pressure

Torque Values Table

Please consult us for advise on Safety Factors.


: PG600: 1: 2011


Product Group 600


Global Valve Center B.V. Zwaalweg 14 2991 ZC BarendrechtThe Netherlands

Tel 1 +31 (0) 180 39 89 38 Tel 2 +31 (0) 180 39 88 69

Fax +31 (0) 84 22 98 163

Product Group 100

Bonded Rubber Liner Butterfly Valves

Product Group 200

Replaceable Rubber Liner Butterfly Valves

Product Group 300

Cassette Type Rubber Liner Butterfly Valves

Product Group 400

Double Eccentric Replaceable Seat Ring

Type Butterfly Valves

Product Group 500

High Performance Butterfly Valves

Product Group 600

Tripple Eccentric Metal Seated Butterfly Valves

Product Group 700

Disc Seated Butterfly Valves

Product Group 800

Cryogenic Butterfly Valves (LPG, LNG)

Product Group 900

Damper Butterfly Valves

wafer, lug and double flanged type - global valve center · · 2012-11-20series 650 tripple...

Documents