www.maptek.com

Quick Start Guideversion 8

Contents

Installation 1

Computer Requirements 1

Installing the Software 1

Vulcan Support 2

Vulcan Online Help 2

Vulcan Users Area 3

Training 3

Licensing 4

Activate the Software 4

Installing a Network Licence 4

Vulcan Workbench 5

Envisage 5

Isis 5

Plot Utility 5

Viewing Data 6

User Interface 7

Triangulations and Design Data Structure 8

Loading Data 8

Copyright

Maptek, Vulcan, I-Site, and MineSuite are registered and unregistered trademarks of Maptek Pty Ltd; Maptek Computacin Chile Ltda; Maptek Computacin Chile Ltda, Sucursal Per; Maptek S de RL de CV; Maptek Informtica do Brasil Ltda and KRJA Systems, Inc. Registered marks are registered in one or more of the following countries: Australia, Brazil, Canada, Chile, Greece, Mexico, Peru, Russia, Spain, the UK and USA.

ALL RIGHTS RESERVED. No part of this manual shall be reproduced, stored in a retrieval system, or transmitted by any means - electronic, mechanical, photocopying, recording, or otherwise - without written permission from Maptek.

No patent liability is assumed with respect to the use of the information contained herein.

Although every precaution has been taken in the preparation of this manual, the publisher and author(s) assume no responsibility for errors or omissions. Neither is any liability assumed for damages resulting from the use of the information contained herein.

For more information contact:

Maptek Pty Ltd63 Conyngham StreetGlenside SA 5065Australia

Or find us on the web at: www.maptek.com

TrademarksDue to the nature of the material, some hardware and software products are mentioned by name. The companies that manufacture the products claim many of these product names as trademarks. It is not the intention of Maptek to claim ownership of these names or trademarks.

Last modification date, March 03, 2009

Installation

Computer RequirementsPentium IV 2GHz

512MB 1GB RAM

685MB total disk space

Additional 2GB free disk space

128-256MB OpenGL compliant 3D video card (for example nVidia Geforce 4 MX) with an appropriate OpenGL driver

3-button generic mouse with wheel

Screen resolution 1280 x 1024

CD-ROM drive

Parallel/USB port for dongle/network connection for FLEXlm floating licence server

Microsoft Internet Explorer 6 (or later)

Installing the SoftwareFor information on installing Vulcan, refer to the Installation Notes on the CD.

Before installing Vulcan 8.0, close any other applications open on your computer.1

Insert the installation disc into your disc drive, and follow the on-screen instructions.2

If the install CD disc does not run automatically, double-click on 3 MyComputer and right-click on the CD-ROM icon or name and select Autoplay.

Prior to installation, your environment variables need to be set and the correct amount of swap space/virtual memory needs to be allocated.

1

Vulcan Support

Vulcan Online HelpVulcan Help provides access to product documentation and instructional content, which is referenced throughout this user guide. Vulcan Help is available by double-clicking the Vulcan Help icon (placed on your desktop as part of the installation).

Once in Vulcan, the Help pages can be accessed using one of the following methods:

Pressing the [F1] key.

Selecting the Start Vulcan Help icon from the Application Area (displayed next to the Vulcan Start button).

Selecting the Help icon from the displayed dialog box.

Selecting the Help icon from the Standard toolbar.

2

Help button

Help icon

Help icon

Vulcan Users AreaThe Users Area offers many useful resources, including the latest Vulcan service pack, a comprehensive FAQ section, and an online form for reporting errors or making suggestions to our Vulcan development team.

Vulcan service packs are released when fixes for known issues and critical updates are made. Primary contacts at each mine site are notified when a new service pack is available for download from www.maptek.com or ftp sites ftp.maptek.com and ftp.maptek.co.uk.

Double-click the .exe file to install the service pack.

See online Help topics:Using Vulcan HelpProduct Support > Office Locations

Product Support > Technical Support

TrainingTo get the most out of your Vulcan software, Maptek offers face-to-face, instructor-led training courses for beginners and advanced users. For information on training options and fees, visit www.maptek.com/training.

3

Licensing

Activate the SoftwareWhen starting Vulcan for the first time, you will need to run the LicenceAdministrator for the purpose of setting a path to a licence file.

There are two types of licences:

Node-locked - Licence key with matching licence files.

Floating - Licence key on a server machine that contains multiple licences.

Start Vulcan by double-clicking the Vulcan 8.0 icon on your desktop.1

On the 2 Vulcan3DSoftware dialog box, click the LicenceAdministrator button.

See online Help topic:Getting Started > Starting Version 8.0

Installing a Network LicenceFLEXnet Publisher is the third party software that Maptek uses to allow licence sharing. The primary contact at your site will be informed (via e-mail) if a FLEXnet Publisher server is required when a licence file is sent.

Installing a FLEXnet Publisher Licence:

Log in to your computer as an administrator.1

Close any other applications that are open on your computer. 2

Insert the installation disc into your disc drive.3

Select 4 InstallVulcananddrivers.

Select 5 InstallNetworkLicence.

See online Help topic:Installing Vulcan > Installing a Network Licence

4

Vulcan Workbench

When starting Vulcan, you will need to select a Vulcan Work Area and an application to open your work area.

EnvisageEnvisage provides a full 3D environment for the design and digitising of lines, polygons, points and text. Extensive string editing and manipulating options are part of the core Envisage system. Included are tools to apply symbols, primitives and line styles to the original string data.

IsisIsis is the interactive database editor used in conjunction with Vulcan user-defined databases. In addition, Isis is used to maintain and edit drillhole, composite, grade control, and geotechnical databases.

Plot UtilityThe Plotting Utility enables you to preview single or multiple plots, zoom in or out of areas of interest, print selected subsets of the plot and print multiple plots using the same page and printer settings.

See online Help topics:Envisage 3D EditorDatabase Management > IsisPlotting Utility > OverviewPlotting Utility > Starting the Plotting UtilityPlotting Utility > The Plotting Utility WindowPlotting Utility > Viewing PlotsPlotting Utility > Using Plot Templates

5

Viewing Data

When Envisage is started, a work area must be selected.

Start Vulcan.1

Double-click on 2 Browse.

Browse to the location of your data and select a folder to open. 3

Click 4 OK.

The folder will appear in the work area box. Any directories that are opened will remain in the work area until manually deleted.

To delete a directory, right-click on the folder and select RemovefromHistory or Removeall to delete the entire list.

The work area history is stored in a file called .vlaunchpref, which is located under C:\Documents and Settings\User Name.

6

User Interface

The Vulcan Workbench consists of the following menu options: File, Window, Tools and Help. These menu options are accessible from all applications (Envisage, Isis, and Plotting Utility); however, each applications File menu contains unique options.

The following image shows the Envisage work area with its various elements.

The Vulcan Explorer is used to browse virtual folders for data stored in the work area.

See online Help topics:The Vulcan Workbench > Introduction > Vulcan Explorer Application

7

Menu bar Primary window Toolbar

Windows toolbarApplication barStatus barVulcan Explorer

Triangulations and Design Data Structure

Triangulations are stored as separate files with a .00t extension. As separate files, they can be moved and copied in the same manner as copying any windows file.

Design data (such as lines and polygons) is stored within layers in a design database. There are two windows files associated with each design database, .dgd.isis and .dgd.isix. All of the data is stored in the .dgd.isis file, but it is indexed by the .dgd.isix file. Both files must be in the working directory before Envisage can access the design data.

Layers are located within the design database. They do not have their own file extension; therefore they can not be manipulated in the Windows environment.

It is possible to transfer layers between design databases or to other users using Envisage menu options.

See online Help topics:Envisage 3D Editor > Introduction > Data structuresEnvisage 3D Editor > File > ArchiveEnvisage 3D Editor > File > Load ArchiveEnvisage 3D Editor > File > Load Recovered LayersEnvisage 3D Editor > File > Design > Layer Edit

Loading DataTo load layers, triangulations and other types of data in Envisage, use one of the following methods:

Using the Vulcan Explorer window:

Double-click on a file.

Drag and drop a file into the Primary window.

Right-click on a file and select Load.

To load multiple files use [SHIFT] (for multiple, consecutive files) and [CTRL] (for multiple, non-consecutive files) to select, right-click and select Load.

Click the Open icon on the Standard toolbar.

8

Open icon

www.maptek.comCopyright Maptek Pty Ltd 1998-2009, All rights reservedMaptek, Vulcan, I-Site, and MineSuite are registered and unregistered trademarks of Maptek Pty Ltd; Maptek Computacin Chile Ltda; Maptek Computacin Chile Ltda, Sucursal Per; Maptek S de RL de CV; Maptek Informtica do Brasil Ltda and KRJA Systems, Inc. Registered marks are registered in one or more of the following countries: Australia, Brazil, Canada, Chile, Greece, Mexico, Peru, Russia, Spain, the UK and USA.