vts 4.6 quick reference card
TRANSCRIPT
-
8/22/2019 VTS 4.6 Quick Reference Card
1/12
Send comments about this document to: [email protected]
SunVTS Quick Reference Card
Part No. 806-6519-10January 2001, Revision A
Sun Microsystems, Inc.901 San Antonio RoadPalo Alto, CA 94303-4900U.S.A. 650-960-1300
-
8/22/2019 VTS 4.6 Quick Reference Card
2/12
Please
Recycle
Copyright 2001 Sun Microsystems, Inc., 901 San Antonio Road, Palo Alto, California 94303-4900
U.S.A. All rights reserved.
This product or document is protectedby copyright and distributed underlicenses restricting its use, copying, distribution, and decompilation.
No part of this product or document maybe reproduced in anyform by anymeanswithout prior written authorizationof Sunand itslicensors,if any. Third-party software, including font technology, is copyrighted and licensed fromSun suppliers.
Parts of theproductmay be derived from Berkeley BSDsystems,licensedfromthe University of California. UNIX is a registered trademarkinthe U.S. and other countries, exclusivelylicensed through X/Open Company, Ltd.For Netscape Communicator, the following notice applies:(c) Copyright 1995NetscapeCommunications Corporation. All rights reserved.
Sun, Sun Microsystems,the Sun logo, AnswerBook2, docs.sun.com, SunVTS, and Solaris are trademarks, registered trademarks, or servicemarks of SunMicrosystems, Inc. in theU.S. andother countries. All SPARCtrademarksare used under licenseand are trademarks or registeredtrademarks of SPARC International, Inc. in the U.S. and other countries. Products bearing SPARC trademarks are based upon an architecture
developed by Sun Microsystems, Inc.
TheOPEN LOOK and Sun GraphicalUser Interfacewas developedby SunMicrosystems, Inc. forits users andlicensees. Sunacknowledges
thepioneering efforts of Xerox in researching anddeveloping theconcept of visual or graphical user interfaces forthe computer industry. Sunholds a non-exclusive license from Xerox to theXerox GraphicalUser Interface, which license also coversSunslicensees who implementOPENLOOKGUIs and otherwise comply with Sunswritten license agreements.
RESTRICTED RIGHTS: Use, duplication, or disclosure by the U.S. Government is subject to restrictions of FAR 52.227-14(g)(2)(6/87) and FAR52.227-19(6/87), or DFAR252.227-7015(b)(6/95) and DFAR 227.7202-3(a).
DOCUMENTATION IS PROVIDED AS IS AND ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND WARRANTIES,
INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT,ARE DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD TO BE LEGALLY INVALID.
Copyright 2000Sun Microsystems,Inc., 901 San Antonio Road, Palo Alto, Californie 94303 Etats-Unis. Tous droits rservs.Ce produit ou documentest protg parun copyrightet distribuavec deslicences quien restreignent lutilisation, la copie, la distribution, et ladcompilation. Aucunepartie de ce produit ou document ne peut tre reproduite sous aucuneforme, par quelque moyenque ce soit, sans
lautorisation pralableet critede Sunet de sesbailleursde licence, sil y en a. Le logiciel dtenupar destiers, et qui comprendla technologierelative auxpolices de caractres, estprotg parun copyrightet licenci pardes fournisseursde Sun.
Desparties de ce produit pourronttre drives dessystmesBerkeley BSDlicencis parlUniversit de Californie. UNIX estune marquedpose auxEtats-Uniset dans dautrespays et licencie exclusivement parX/Open Company, Ltd. La notice suivante estapplicable Netscape Communicator: (c) Copyright1995 Netscape Communications Corporation. Tous droits rservs.
Sun, SunMicrosystems,le logo Sun, AnswerBook2, docs.sun.com, SunVTS, et Solaris sont desmarquesde fabrique ou desmarquesdposes,ou marques de service, de SunMicrosystems, Inc. auxEtats-Uniset dans dautres pays. Toutes les marques SPARCsont utilises sous licence etsont desmarquesde fabrique ou desmarquesdposesde SPARCInternational,Inc. auxEtats-Uniset dans dautres pays. Lesproduits portant
les marques SPARC sontbass sur une architecture dveloppe par Sun Microsystems,Inc.
Linterface dutilisationgraphique OPEN LOOK et Sun a t dveloppe parSun Microsystems, Inc. pour sesutilisateurs et licencis. Sun
reconnatles efforts de pionniersde Xerox pour la rechercheet le dveloppement du concept desinterfaces dutilisation visuelle ou graphiquepour lindustrie de linformatique. Sun dtient une licence non exclusive de Xerox sur linterface dutilisation graphique Xerox, cette licencecouvrant galementles licencis de Sunqui mettent en place linterface dutilisation graphique OPEN LOOK et qui en outre se conforment aux
licences crites de Sun.
CETTE PUBLICATION EST FOURNIE "EN LETAT" ET AUCUNE GARANTIE, EXPRESSE OU IMPLICITE, NEST ACCORDEE, Y COMPRISDES GARANTIES CONCERNANT LA VALEUR MARCHANDE, LAPTITUDEDE LA PUBLICATIONA REPONDREA UNE UTILISATION
PARTICULIERE, OU LE FAITQUELLE NE SOIT PAS CONTREFAISANTE DE PRODUIT DE TIERS.CE DENI DE GARANTIE NESAPPLIQUERAIT PAS,DANS LA MESURE OU IL SERAITTENU JURIDIQUEMENT NULET NONAVENU.
-
8/22/2019 VTS 4.6 Quick Reference Card
3/12
1
CHAPTER 1
SunVTS Quick Reference
Starting the SunVTS Software
Follow these steps to start SunVTS.
w To Start SunVTS
1. Become superuser (root) and change directories to the SunVTS bin directory(/opt/SUNWvts/bin by default).
2. If you are testing a local system type the following:
3. If you are testing a remote machine that is running the SunVTS kernel, type thefollowing:
Replace remote_hostname with the hostname of the remote machine.
# ./sunvts
# ./sunvts -h remote_hostname
-
8/22/2019 VTS 4.6 Quick Reference Card
4/12
2 SunVTS Quick Reference
w To Start SunVTS Using OpenWindows
1. Type the following:
w To Start SunVTS Using the SunVTS TTY Interface
1. Type the following:
TABLE 1-1 describes the common TTY interface command keys.
SunVTS CDE Main WindowFIGURE 1-1 shows the SunVTS CDE main window.
Note See the SunVTS Users Guide for information about using the OPEN LOOK
interface.
# ./sunvts -l
# ./sunvts -t
TABLE 1-1 Common TTY Interface Command Keys
Key Description
Tab Selects another panel; the selected panel is surrounded by asterisks (*)
Return Selects an option or displays a menu
Space bar Toggles (enables/disables) a choice
Arrow Keys Moves the cursor in a selected panel
Escape Discards a pop-up menu or window
Control-F Scrolls forward in option windows
Control-B Scrolls backward in option windows
Control-X Quits the TTY Interface, but leaves the SunVTS kernel running on the testmachine
-
8/22/2019 VTS 4.6 Quick Reference Card
5/12
SunVTS Quick Reference 3
FIGURE 1-1 SunVTS CDE Main Window
FIGURE 1-2 describes the SunVTS menu bar:
Menu bar
Quick-accessbuttons
Status panel
Select devicespanel
Select modepanel
System Map
Test MessagePanel
-
8/22/2019 VTS 4.6 Quick Reference Card
6/12
4 SunVTS Quick Reference
FIGURE 1-2 SunVTS Menus From the Menu Bar
Commands MenuThe Commands menu has the following functions.
s Start testing
s Starts enabled tests
s Starts enabled tests; records testing session
s Replays a recorded testing session
s
Stop: Stops testings Reset: Sets pass/error count to zero; pauses
s Suspend: Pauses active tests
s Resume: Resumes testing
s Connect to Host: Connects to another machine running SunVTS kernel
s Trace test: Traces enabled tests
s Reprobe system: Probes system again
s
Quit SunVTS: Quits the following: UI and Kernel, UI only, Kernel only
Thresholds. . .Notify. . .Schedule. . .Test execution. . .
Advanced. . .Option files. . .
Thresholds. . .Notify. . .Schedule. . .Test execution. . .
Advanced. . .Option files. . .
Open system mapClose system mapOpen system mapClose system map
Start testingStop testing
Reset
Suspend
Resume
Connect to host. . .
Trace test. . .
Reprobe system
Performance meter
Exit SunVTS
Start testingStop testing
Reset
Suspend
Resume
Connect to host. . .
Trace test. . .
Reprobe system
Performance meter
Exit SunVTS
DSchedOptions ReportsCommands View
Start DSShow DSQuit Options
System configuration. . .Log files. . .System configuration. . .Log files. . .
Quit DS UI onlyQuit DS
UI and kernelUI onlyKernel only
Start testingStart testing with record
Replay
-
8/22/2019 VTS 4.6 Quick Reference Card
7/12
SunVTS Quick Reference 5
View Menu
The view menu has the following options:
s Open System map
s Close System map
Options Menu
The Options menu has the following options:
s Thresholds
s Notify
s Schedule
s Test execution
s Advanced
s Option files
Reports Menu
The Reports menu contains the System Configuration menu which displays or printsSystem Configuration. It displays, prints, or removes log file information.
DSched Menu
The DSched menu provides access to the SunVTS Deterministic Scheduler asfollows:
s Start DSstarts the Deterministic Scheduler feature and displays theDeterministic Scheduler dialog box.
s Show DSdisplays the Deterministic Scheduler dialog box after you quit the DS
UI.
s Quit Optionsprovides access to the following quit options:
s Quit DS UI onlyquits the Deterministic Scheduler dialog box and leaves theDeterministic Scheduler running.
s Quit DSquits the Deterministic Scheduler dialog box and stops theDeterministic Scheduler.
-
8/22/2019 VTS 4.6 Quick Reference Card
8/12
6 SunVTS Quick Reference
Help Menu
The Help menu provides access to the SunVTS version that is running and to a table
that lists which versions of SunVTS run on the Solaris operating environmentreleases.
Quick Access Buttonss Start: Starts enabled tests
s Stop: Stops active tests
s Reset: Resets pass and error counts to zero; pauses tests
s Host: Connects to a machine running SunVTS
s Log: Displays or prints log files
s Meter: Displays system performance meter
s Quit: Quits only the SunVTS user interface
Status Panel
The system status panel displays the following:
s Host name being tested
s Model being tested
s Testing status
s
System passess Cumulative errors
s Elapsed test time
System Map
You can view devices in the System map as follows:s Logical Mappingorganizes the devices, according to function, into groups.
s Physical Mappingorganizes the devices according to their exact location on thesystem.
Note Use the View-->Open System Map command to expand collapsed groups inthe system map.
-
8/22/2019 VTS 4.6 Quick Reference Card
9/12
SunVTS Quick Reference 7
The system map also provides access to the test options for each group and device,and displays the results of device testing:
s Asteriskindicates a device is currently being tested.
s Blackindicates the device is not tested, or the first pass is not complete.s Greenindicates at least one test completed with no errors detected.
s Redindicates at least one error was detected.
Select Devices
With the Select Devices menu you can select the following:
s Defaultselects the SunVTS default set of devices
s Nonedeselects all devices
s Allselects all devices
s Interventionrequired before you can select tests that require special devicepreparation.
Select Test Mode
With the Select Mode option you can select the following:
s Connection test modeprovides a low-stress, quick testing of the availability andconnectivity of selected devices.
s Functional test modeprovides more robust testing of your system and devices
as compared with connection test mode.s Auto Config test modeopens the Automatic Configuration dialog box which
provides access to the Auto Config feature. This feature automatically assigns testoptions.
Test Message Panel
Test messages are displayed in the SunVTS console window, which displays errorsand status.
-
8/22/2019 VTS 4.6 Quick Reference Card
10/12
8 SunVTS Quick Reference
SunVTS CDE Option Menu Dialog BoxesThese dialog boxes are displayed from
the selections available in the Options Menu
NoteUse arrows to increase ordecrease dialog box values.
-
8/22/2019 VTS 4.6 Quick Reference Card
11/12
SunVTS Quick Reference 9
FIGURE 1-3 SunVTS CDE Option Menus
SunVTS CDE Option Menu Dialog BoxDescriptions
Threshold Options
s Max System PassesStates maximum number of system passes before stopping
all tests (0 means infinite passes)s Max System ErrorsIndicates maximum number of errors before stopping all
tests (default is 1)
s Max System TimeIndicates maximum number of minutes to run all tests (0means infinite)
Notify Optionss Send EmailWhen selected, sends testing status messages to you through email
s Email AddressEstablishes an email address where testing status messages aresent
s Log PeriodIndicates time, in minutes, between testing status email messages
Schedule Optionss Auto StartBegins testing when SunVTS is started; used with the Options Files
option
s Single PassRuns only one pass of each selected test
s System ConcurrencySpecifies the number of tests you want to run concurrently
s Group ConcurrencySpecifies the number of test groups you want to runconcurrently
Test Execution Options
s StressIncreases test performance; only available for some tests
s VerboseDisplays verbose test messages in the SunVTS Console window
s Core FileWhen disabled, SunVTS sends messages instead of creating a core file
s Run On ErrorContinues testing until the maximum error number is reached forthe system; each test can report up to three error messages per failure
-
8/22/2019 VTS 4.6 Quick Reference Card
12/12
10 SunVTS Quick Reference
s Max PassesSpecifies maximum number of passes a test can be run
s Max ErrorsSets maximum number of errors a test will allow before stopping (0means infinite)
s Max TimeDefines a time limit, in minutes, a test can run (0 means infinite)
s Number of InstancesSets number of instances for each scalable test
Advanced Options
s System OverrideChanges all test and group system options to match theoptions on this window (enabled by default)
s Group OverrideOverrides any test system options in favor of the group optionson this window, unless System Override is enabled
s Group LockProtects test group options from being changed
s Test LockProtects the test system options from being changed in this window,unless Group Override or System Override is enabled
Option Filess Options File Load/Store/RemoveDisplays file name field where you can enter
a file name to load, store, or remove