vt veres kft +36 76 500 170. project at the customer vt veres kft +36 76 500 170 technical solutions...
TRANSCRIPT
VT VERES KFT +36 76 500 170
Project at the Customer
VT VERES KFT +36 76 500 170
Technical solutions Budget
• Specification is ready but made it out of the company.
•Budget is ready, but the technical specifications is wrong.
•Technical specification is correct and made by factory, but they have no enough many.
• What is the best solution for the project ?
•We have to work together in time
Main Problems :
Причины проблем:
ПроектироваПроектированиение
Эксплуатация и Эксплуатация и ремонтремонт
ПоследуюПоследующие щие
измененияизменения
Выбор и спецификация
Монтаж Монтаж
и и настройнастрой
кака
How to make a good specification ?
You have to know what do you want You have to find the good technical
solutions You have to collect the quotes the
same technical base. The same base quotes have to supply
the best solutions based on the best price.
You have to Communicating exactly with your supplier.
We are able to supply the full quote and sizing and designing system to our customers for :
VALVE AND CONTROLS ELEKTRIC,PNEUMATIC, HIDRAULYC, GAS
OVER OIL ect. ACTUATORS MODULATING, and VALVE MONITORING
SYSTEM Scada, PLC, ESD systems
Specification of the valve automation
Valve torque, type and flow media
Control details
Acquired Actuator type
Modulating actuator details
Valve topworksQuality requirements
Communicating
Sending questioners for customers
Sending technical characteristics, and sizing the equipments.
Preparing some alternative technical solutions
Making the quote with options and alternatives and discussing with designer
Presenting some similar references
Supply the certifications
When we start the project :
Сертификаты отраслей
работ
Сертификаты для страны
где работаем
Реальное присутствие для партнеров
Протоколы подбора и осмотра
Протоколы настройки и
монтажа
ISO 9000
Диагностика и ремонт по регламенту
Base documentation of quote
Questioner technical Data sheets for new actuator purchase order together with new valve.
Electric, pneu, gas-over-oil, hydraulic Questioner technical Data sheets for new
actuator purchase order with available valves. Questioner of modulating parameters, and
controls possibilities
Sizing of On-Off valves
Фланцы и муфты для соединения с арматурами
и с доработкой для любой !
Тип A1 Тип A1E Тип B1 Тип B4 Тип B4E Тип BLМуфта избронзы
Удлиненное исполнение
Отделкой длябольшего диаметра
шпоночного соединения
Сплошной из стали
Удлиненныйсплошной из стали
Для вращения муфт для
подъемных штоков
из стали
Муфты только для передачи момента
Муфты для передачи момента и осевых сил
(для арматур с подъемным штоком)
Согласно стандартам MSS и ISO
Sizing of modulating valves
• With Emergency shutdown systems
When we finalized our quote with control possibilities
This valve will be on the field
The valves at the control room
Valve Automation Centre
Engineering Sizing Sales Process Controlling Assembling Repairs Maintenance Training
VT VERES KFT +36 76 500 170
Tendering
Why important the harmonized details of the technical solutions ?
Because we would like to unpack the cat, „and making valve control easier.”
After the contracting procedure : Transport
Commissioning at the customer :
At the valve maker
End of the project at the customer :
Contacts
TEL : +36 76 500 170 FAX : +36 70 500 171 e-mail : [email protected] Web : http://vtveres.hu