vshaper is the best available 3d printer · 3d printing is also used in aesthetic surgery,...
TRANSCRIPT
excellent 3d shape 4 you VshAPer.com
According to experts additive manufacturing is oneof the techniques that will revolutionize the worldof medicine. It is already used to aid the creation of dental crowns, bone parts, blood vessels and hip-joints prosthetics.
This type of prints enhance the preparation for surgery, even if they are not used in the procedure. More and more surgeons choose to practise on 3D Printed modelsin preparation for a complicated operation.
3D Printing is also used in aesthetic surgery, prosthetics and transplantation. With the use of 3D Prints it is possibleto create perfectly fitted tooth crown, lighter and more hygienic cast counterpart as well as innovative boneprosthetics, enabling the substitution of body parts damaged in accidents or by complications from cancer.
VSHAPER is the best available 3D Printerable to print high-performance polymers.
Rielson FalckHelmholtz-Zentrum Geesthacht
Isolated Heated Chamber Printing Temperature 420°C Door Lock Vacuum Table
excellent 3d shape 4 you Vshaper.com
Technical specification
Fused Filament Fabrication250 x 250 x 175 mm0.05 mm - 0.3 mm30 μmXY 13 μm / Z 2.5 μm
VPREC-PRO-MED (single head)420°CStandard: 0.4 mm(optional: 0.2, 0,8)1,75 mmPEEK1 μm
VPREC-SINGLE-MED (single head)300°CStandard: 0.4 mm(optional: 0.2, 0.8, 1.0, 1.2)1,75 mmHIPS, ASA, PET-G, PC-ABS, PA12, ABS,PA+CF, PA+GF, PC, PMMA, PLLA1 μm
Closed (with constant temp. inside)Yes70°CYes (UV light)Yes (with HEPA filter)Yes
Vacuum tableRemovable plastic surfaceS–PRO–HT for VPREC-PRO extruderS–PRO–LT for VPREC-SINGLE extruderYes150°CYes
Powdered steelSilver-based antibacterial powder coatingsStepper motorsLinear guides
< 40 dB100-240V ~ 2A, 50-60 Hz
YesMonochrome (128 x 64 px)USB, SD Card, Ethernet
SOFTSHAPERWindows 10 - 64-bit
590 x 462 x 463 mm37 kg
VSHAPER 270 MED
Fused Filament Fabrication420 x 420 x 440 mm0.05 mm - 0.3 mm30 μmXY 13 μm / Z 2.5 μm
VPREC-PRO-MED (single head)420°CStandard: 0.4 mm(optional: 0.2, 0,8)1,75 mmPEEK1 μm
VPREC-SINGLE-MED (single head)300°CStandard: 0.4 mm(optional: 0.2, 0.8, 1.0, 1.2)
1,75 mmHIPS, ASA, PET-G, PC-ABS, PA12,ABS, PA+CF, PA+GF, PC, PMMA, PLLA1 μm
Closed (with constant temp. inside)Yes70°CYes (UV light)Yes (with HEPA filter)Yes
Vacuum tableRemovable plastic surfaceS–PRO–HT for VPREC-PRO extruderS–PRO–LT for VPREC-SINGLE extruderYes150°CYes
Powdered steelSilver-based antibacterial powder coatingsStepper motorsLinear guides
< 40 dB100-240V ~ 2A, 50-60 Hz
YesMonochrome (128 x 64 px)USB, SD Card, Ethernet
SOFTSHAPERWindows 10 - 64-bit
910 x 660 x 1890 mm160 kg
VSHAPER 450 MED
Printing ParametersPrinting technology
WorkspaceResolution
The accuracy of the position of layersPositioning accuracy
ExtruderMaximum print temperature
Nozzle diameter
Filament diameterRecommended VSHAPER material
Filament feeding accuracy
ExtruderMaximum print temperature
Nozzle diameter
Filament diameterRecommended VSHAPER materials
Filament feeding accuracy
Working chamberConstruction
HeatingMaximum temperature inside
SterilisationVentilationDoor lock
Working platformType
Surface
HeatingMaximum temperature
Auto-leveling
Mechanical parametersConstruction
HousingEngines
Transmission
Electrical parametersThe volume of noise during printing
Power supply
ControlTouch panel
DisplayInterfaces
SoftwareControl software
Recommended operating system
Dimensions and weightExternal dimensions
Weight
The above parameters may be altered without notice.