vpss 3i bend ii - amada .pdf4 bend ii and abe planner bend ii: bending program for single...
TRANSCRIPT
VPSS 3i BEND II
➢ Full AP100: Basic Module, Basic Unfold ,
3D Modification.
➢ PRODUCTION DESIGNER
➢ BEND II and ABE PLANNER
➢ Tools and Machines Management
➢ Material and Bend Allowances Management
➢ VSDD and SDDJ Data Bases Management
2
COMMON Module
TO DRAW
TO IMPORT
TO PROGRAM
TO MANAGE
WHAT IS INCLUDED INSIDE THE BEND SOLUTION PACK:
2
➢ Full AP100: Basic Module, Basic Unfold , 3D Modification
➢ 2D CAD System
- Mainly designed for BENDING parts (Flat parts and bending parts).
- Standard drawing functions, Notching function on elements, in corners, macro for holes, oblong, square, rectangle one by
one, in line, in grid, etc.…
- Unfolding of parts following the AMADA bend allowances data base, Vee type, bending radius, as well as bending type (air
bend, offset bend, hemming bend, step bend)
- Control and modification of part design (face/edge, face/face, edge/edge)
- Automatic part quotation
- Automatic and simultaneous 3D view from 2D construction
Parts Samples.
3D View Auto Unfold + Quotation 3D View Unfold
TO DRAW
3
➢ PRODUCTION DESIGNER
➢ IMPORT 2D & 3D drawing files
- Importation of 2D-3D files
- Analyse of the unfolding part according to the AMADA bend allowance data base, the Vee type and the bending radius,
- Importation of single part or assembly, special tool management (punching forms, type of insert, etc.)
- Exportation to DXF, DWG, SAT, STEP format.
- Generation of SEM file (Sheet Engineering Model),
• Which type of importation files ? - 2D DXF and DWG type
- 3D SAT, Parasolid, Step, Catia, SolidEdge, Inventor, ProE, Solidworks,,,, type
Type 2D/3D Customer Import
Unfolding 2D
drawing 2D Multi View Single 3D part 3D Parts Assembly
Production Designer in 5 steps
3D model Importation Model Analised and set-up of
Material, RI/ VeeControl and Generation
SEM fileUnfold file generation
Save assembly of parts in
one clic in SDDJ and VSDD
bases
TO IMPORT
4
➢ BEND II and ABE PLANNER
BEND II: Bending program for Single Parts
- Manual and automatic research of bending sequences and tools for single part, taking into account collisions with special forms (embossing, inserts, etc.)
- Bending sequences done only for AMADA press brakes,
- Bend II integrates Production Designer
- Possible to bend the parts, when generating the SEM file (Sheet Engineering Model)BEND II integrates
Production Designer
All features required for the creation of
bending sequence are usable in both
Automatic and Manuel modes, following
the knowledge of operator, who can
swap from one to another one.
ABE PLANNER: Bending program for Scheduled Parts
- Appropriate automatic research of bending sequences and tools for a schedule of parts, taking into account collisions with special forms, inserts,,,,,
ABE PLANNER in 4 Steps
Parts Schedule Creation
Single Automatic research of bending
sequences and tools for each parts on
the schedule,
Common Automatic research of bending
sequences and tools for all parts on the
schedule,
Simulation and collision control with
manual adjustement if necessary,
TO PROGRAM
5
➢ Tools, Machines, Tool Library, Material Library, Bend Allowances management…
➢ VSDD , SDDJ Data Bases Management…
TO MANAGE
Data Explorer Parameter Explorer Material Explorer
Management of parts data,
bending, cutting and welding
…
Management of machine configuration,
bending tools…
Management of material /
thicknesses and bend allowances
data…
6
Operating System Windows 7 Professional 32 / 64 Bits SP1
HARDWARE CONFIGURATION:
Caracteristics Minimum Configuration Recommended Configuration
Processeur Intel I5 Intel I7
RAM Memory 8 GB 16 GB
Graphic Card Quadro Quadro
HDD 500GB / 100 GB Free 500GB / 100 GB Free
Media DVD Driver DVD Driver
I/O USB 2 Port USB 4 Port
Network Card 100/1000 T Ethernet Base 100/1000 T Ethernet Base
Resolution 1280 x 1024 1920 x 1080
- All software have to be installed on clean Operating system, to avoid conflict with other software.
- AMADA software are using the SQL data base motor from Microsoft and we do not guaranty the compatibility with other products using the
same SQL.
- All the PC network management has to be done before installation, because after Amada products installation, this process can damage the
software functionnality.
- Amada software users needs local administrator rights on their PC.
- High flow Internet connexion for long distance connexions. (For Maintenance).