vol. 2s3.amazonaws.com/machinetools_production/uploads/803705/...we acknowledge above logo are...

Vol. 2

SOLDERING DESOLDERING SOLUTIONS

SCREW ASSEMBLY SOLUTIONS

HAND TOOLS

ESD & CLEAN ROOM SOLUTIONS

ECO FRIENDLY CLEANERS

DISPENSING SOLUTIONS

CONFORMAL COATINGS

FLUX CLEANERS

www.advancetechonline.in

We acknowledge Above Logo are registered Trade Mark of Below Mention companies, we do not assume legal Liability as a result of its use and printing: Nokia India Pvt. Ltd., Casio India Pvt. Ltd., Sony India Pvt. Ltd., LG Electronics India Pvt.Ltd, ISRO Satellite Center, Bharat Heavy Electricals Ltd., Bharat Electronics Ltd., Ahuja Radios, APC India Pvt. Ltd., Lumax Industries Ltd., Whirlpool of India Limited, Numeric Power Systems Ltd.,TATA BP SOLAR India (P) Ltd, FCI OEN Connectors Ltd., O/E/N India Limited, Philips Electronics (I) Ltd., Salzer Electronics Ltd., Schneider Electric India Private Limited, Sharp India Limited.,Indian Railways, Suzlon Energy Limited, Minda Industries Limited, ABB Ltd., Secure Meters Ltd.,Raychem RPG Ltd, Motor Industries Co. Ltd., Genus Overseas Electronics Ltd, Linkwell Telesystems Pvt Ltd., Electronics Corporation of India Limited, Acme Tele Power Ltd., Intex Technologies India Ltd., Amara Raja Electronics Pvt. Ltd, Luminous Power Technologies Pvt.Ltd., Sukam Power Systems Ltd.,Siemens Ltd, L& T Limited.,AREVA T & D INDIA LTD, Bharat Dynamics Ltd.,Hindustan Aeronautics Ltd., Bhabha Atomic Research Centre, Canon India Pvt. Ltd., Elcoteq Electronics (India) Pvt Ltd, Crompton Greaves Ltd, DB Power Electronics (P) Ltd, Delhi Metro Rail Corporation Ltd., Delta Energy Systems (I) Pvt. Ltd., Denso Haryana Pvt. Ltd., Pricol Limited., D-Link (India) Ltd., Eureka Forbes Limited, Flextronics Technologies (I) Pvt. Ltd., Celestica (Hyderabad) Electronics Pvt. Ltd.,Fanuc India (P) Ltd, Lucas TVS Limited, NTTF Industries Limited, Bharti Teletech Limited

OUR COMPANY

MINDA

MICOBosch Group

EUREKA FORBESYour f r iend for l i fe

REVDB

DELHI METRO RAIL CORPORATION LTD.fnYyh esVªks jsy dkWjiksjs’ku fyfeVsM

LAUTOMOTIVE PARTS

BHARAT ELECTRONICS Hkkjr bysDVªksfuDl

LUMINOUSEnjoy Technology

ELCOTEQ

Legendary ReliabilityTM

LARSEN & TOUBROSchneiderElectric

ALC T E L

Raychem

;krgf

utqgc

cgqtulqlL;

vkdk’kok.kh

Building Networks for People

EVERYDAY SOLUTIONS

CromptonGreaves

Demand MoreTATA BP SOLAR

LGGenus Celestica CM

pr col

NUMERIC

List of our few customers

Our Offices & Facilities New Delhi Office

Pune

Bangalore

ContentsSMD / PTH SOLDERING DESOLDERING SOLUTIONSSoldering / Desoldering Stations for PTH / SMD, Solder Pot, BGA Rework Station, Fume Absorber, Vision Inspection System, Profiler for Reflow / Wave soldering Machine & Accessories.

SCREW ASSEMBLY SOLUTIONSElectric / Pneumatic Screw Drivers, Torque Meter, Screw Feeders, Tool ARM for Screw Drivers, Balancer, Auto Screw Feeder, Screw Counter & Screw Driver Bits.

ESD / CLEAN ROOM SOLUTIONSAprons, Wrist Band, Gloves, Shoes , Sleepers, Brush , Finger cots, Heel strap, Rubber Mat, Sticky Mat, Wipes, Ionizers, Swabs, Static Charge Meter, Ion Gun, Wrist Band Tester.

HAND TOOLSCutters, Pliers, Cable Cutter, Heat Cutter, Pneumatic Cutter, Ratchet Cable Cutter, Wire Stripper, Tweezer, PLCC Extractors, Glue Gun, Ceramic Aligners, Tool Kits.

FLUX CLEANERSCleaner for various type flux, Flux Cleaner by hand, Vapor Degreaser, Part Cleaning, etc.

CONFORMAL COATINGSSilicon, Acrylic, Urethane, High Temp Silicon & Latest STATE OF ART high speed curing type.

DISPENSING SOLUTIONSElectric / Pneumatic dispensers, Dispensing valves, Barrels & Needles. 2 part dispensing, Barrel Filler etc.

ECO FRIENDLY CLEANERS SMT Stencil Cleaner, Cleaner for Reflow / Wave Soldering Machine & CLEANER / DE-GREASER for Heavy Industrial Machines.

(2-11)

(12-14)

(15-19)

(20-26)

(27)

(28)

(29)

(30-31)

PX-501

Economical Temp. Controller Soldering Station 80watt, ceramic heater, temp range 250-450°C. different shapes of bits. From: goot, Japan

PX-501AS RX-701AS

Antistatic Temp. Controller Soldering Station 60 watt, ceramic heater, temp range 250-450°C. Iron work on 24 Volt. different shapes of bits. From: goot, Japan

Economical Station 80 watt, ceramic heater, temp range 250-450°C. different shapes of bits. From: goot, Japan

Antistatic Temp. Controller Soldering

RX-711AS RX-802ASRX-760AS

Antistatic Digital Display Temp. Controller Soldering, Station, latest tip Heater integrated Technology , 70 watt, temp range 50 to 450 °C. Iron work on 24 Volt, best suitable for LEAD FREE application or if looking efficiency of work, different shapes of bits. From: goot, Japan

Antistatic Digital Display Temp. Controller Soldering Station 60 watt, ceramic heater, temp range 250-480°C. Iron work on 24 Volt. Show Tip Temp. Display, different shapes of bits. From: goot, Japan

Antistatic Digital Display Temp. Controller Soldering Station 70 watt, ceramic heater, temp range 200-500°C. Iron work on 24 Volt. Show Tip Temp. Display, different shapes of bits. Ideal for Heavy Joint Jobs. From: goot, Japan

Temperature Setting Knob

Power Monitor Lamp

PX-201Heat Insulation Cap forquick storage

PX-201

Temp. Controller Soldering Iron 70 watt, ceramic heater, temp range 250-450°C. different shapes of bits, heat insulated cap for quick Pack after work, Ideal for field work From: goot, Japan

RX-852AS PX-201RX-802ASPH

PX-2 Series KS-Series TQ-95

Temp. Controller Soldering Iron 70 watt, ceramic heater, pre fix temp PX-232 (320°C), PX-238 (380°C), PX-242(420°C) per requirement,different shapes of bits. From: goot, Japan

General Purpose soldering iron Long life tip, durable Nichrome Heater avai lable in 30,40,60,80, 100 watt, different shapes of bits. From: goot, Japan

Quick Heat dual Watt 20-200 watt Soldering Iron with ceramic heater, Different shapes of bits comes with heat insulated Cap. Ideal for field work. no need to wait for cooling From: goot, Japan

Antistatic Digital Display Temp. Controller Soldering Station with pre Heating effect using air or Nitrogen, latest tip Heater integrated Technology, 150 watt, temp range 50 to 450 °C. Iron work on 24 Volt, best suitable for fast completion of Heavy solder Joint Jobs,different shapes of bits. From: goot, Japan

RX-802AS

RX-802AS station for Nitrogen soldering 100R:Nirogen generator Optional ). If external Nitrogen input by user then controller NC-10 require. Best suitable for LEAD FREE application or if looking efficiency of work, different shapes of bits. From: goot, Japan

(NC-

Economical Antistatic Temp. Controller Soldering

80 and 100 watt is CI

SMD / PTH SOLDERING DESOLDERING SOLUTIONS www.advancetechonline.in

Direct Import by customer onlyStock Items Customer specific import only & mini order value applicable. Advance along with order is mustSI DI CI 2

TQ-77 HP-Series CXR-41

HF-60

TP-100AS

TP-200 SVS-500 GS-100

High Watt Soldering Iron 150,200,300 watt with Nichrome special high efficiency and durable heater. From: goot, Japan

Gun Shape Dual watt, Normal 20 watt, Pulling the trigger boosts the output 200watt. The design allows full concentration on the work by making it easy to see the tip, different shape of bits available. From goot, Japan

Professional soldering Iron Ceramic Heater for excellent heat generation and recovery 30 watt, different shapes of bits. From: goot Japan

Manual feed Soldering Iron, 30/60 watt change over with switch. Solder feed with trigger manually From: goot Japan

Antistatic Temp. Controlled Desoldering Gun 80 watt Ceramic Heater in-built Vacuum pump. Temp Variable 250-450 °C, comes with carry case ideal for field desoldering of PTH components, different desoldering t ips avai lable From: goot, Japan

Antistatic Temp. Controlled Bench top Desoldering station with in- built dual pump. Ceramic Heater 80watt (250-450°C), different desoldering tips From: goot, Japan

Antistatic Temp. Controlled Bench top combined Soldering-Desoldering station with in-built dual pump. Ideal for factory Environment for repair and rework of PTH components.soldering 70 watt Ceramic Heater (250-450°C)/desoldering 80 watt Ceramic Heater ( 250-480°C),different soldering desoldering tips From: goot, Japan

Manual desoldering pump, High Vacuum Capacity. Durable and high quality From: goot, Japan

SVS-500

Antistatic Temp. Controlled Bench top combined

Temp. Controlled Desoldering Gun 80 watt Ceramic Heater in-built Vacuum pump. Temp Variable 250-450 °C, comes with carry case ideal for field desoldering of PTH components, different desoldering tips available From: goot Japan

TP-100GS-510

Gas Soldering Iron work for field where no Power

available. Work as soldering,hot blow, blow torch

From: Goot Japan

KYP

Compact and lightweight, easy to use, Long-life black tip. Dual watt 30/60 watt, Gun Shape for easy Operation and economical also. From : goot Japan

MI

Low voltage assures easy soldering of electronic parts.,Cigarette lighter plug. Model : MCP-18 (11-13 AC/DC) 18W and Model :MCP-24 (22-26 AC/DC) :24W Model :MI-6-6V 5–6V AC / DC 6W Model : MI-6-12V 11–12V AC / DC 6W From: goot, Japan

MCP

MI/MCP



SMD / PTH SOLDERING DESOLDERING SOLUTIONS

GS-108

Manual desoldering pump small size Durable and high quality From: goot, Japan

GS-150

Antistatic Manual desoldering pump, High Vacuum Capacity. Durable and high quality From: goot, Japan

GS-158

Antistatic Manual desoldering pump small size Durable and high quality From: goot, Japan

POT-21C

Solder Pot 130 watt high efficiency heater. 36X36 mm bath dimension. Temp variable Range 270-530 °C. SS bath. From Japan goot

POT-22C

Solder Pot 130 watt high efficiency heater. 36X36 mm bath dimension. Temp variable Range 270-530 °C. Anti Erosion treated bath for Lead free. From goot, Japan

POT-23C

Solder Pot 130 watt high efficiency heater. 31X39(H)mm bath dimension. Temp variable Range 270-530 °C. Anti Erosion Ceramic bath for Lead free. From goot, Japan

POT-50C

Accurate PID temperature control. 370-430 Watt, Max Temp 500 °C, Bath size 50X50X50(H) mm Thick SS. POT-51C available with ceramic Bath. From goot Japan

POT-100C

PID Control Solder Pot 440 watt Max Temp 350 . Bath(SS) 91X135X60(H) mm. High Temperature accuracy.From goot, Japan

°C

POT-100C POT-200C

PID Control Solder Pot 720 watt Max Temp 400 . Bath (SS) 130X180X60(H) mm. High Temperature accuracy. From goot, Japan

°C

POT-400C

PID Control Solder Pot 3KW Max Temp 350 . Cast Iron durable 300X400X60(H) mm. High Temperature accuracy. From goot, Japan

°C

POT-102C

PID Control Solder Pot 450 watt Max Temp 350 . Ceramic Coated Bath or Lead free 91X135X60(H) mm. High Temperature accuracy. From goot,Japan

°C

POT-202C

PID Control Solder Pot 720 watt Max Temp 400 . Ceramic Coated Bath or Lead free 130X180X60(H) mm. High Temperature accuracy. From: goot, Japan

°C




SP-201

Solder Pot 350 watt Max temp 525 , Bath dia 64 and 38 mm deep accuracy ± 6 °C. auto Voltage correction switch. Porcelainized Bath for Lead free Bath available Model SP-201P. From Plato USA.

°C

SP-401

Solder Pot 500 watt Max temp 595 , Bath dia 64 and 38 mm deep accuracy ± 6 °C. Auto Voltage correction switch. Porcelain zed Bath for Lead free Bath available Model SP-401P. From : Plato USA.

°CSolder Pot 350 watt Max temp 496 , LCD temp Display, Bath dia 64 and 38 mm deep accuracy ± 2.75 °C. Auto Voltage correction switch. Temp Lock switch. Porcelain zed Bath for Lead free Bath available Model SP-150TP From Plato USA.

°C

SP-150T

Solder Pot 1000 watt Max temp 399 , LCD temp Display, Bath dia 102X152X102 mm Accuracy ± 2.75 °C. auto Voltage correction switch. Temp Lock switch. Porcelain zed Bath for Lead free Bath available Model SP-750TP From: Plato USA.

°C

SP-750TSP-750T XFC-200XFC-200

Antistatic temperature control SMD rework station with in-built Air and Vacuum Pump. Power 450 watt, temp range 150-450 °C, air variable 5-20l/Min and vacuum-220 mmHG. Different Shape of nozzle as per component. Vacuum component lift, safe to use From goot, Japan

XFC-110

Antistatic Digital Display temperature control SMD rework station with in-built Air and Vacuum Pump. Power 450 watt, temp range 50-550 °C, air variable 5-23l/Min and vacuum -400 mmHG. Different Shape of nozzle as per component. Vacuum component lift, safe to use From goot, Japan

Antistatic Digital Display PID temperature control SMD rework station with in-built Air and Vacuum Pump. Temp to Time profile. Special profile for BGA Components. Power 450 watt, temp range 50-550 °C, Air variable 5-25l/Min and vacuum-400 mmHG. Different Shape of nozzle as per components. Vacuum component lift, safe to useFrom goot, Japan

XFC-210 XFC-300/301

Antistatic Digital Display PID temperature control SMD rework station with in-built Air and Vacuum Pump. Temp to Time profile. Special profile for BGA Components. Power 450 watt, temp range 50-550 °C, Air variable 5-25l/Min and vacuum-400 mmHG. AUTO Profile: No struggle for achieving profile. Different Shape of nozzle as per components. Vacuum component lift, safe to use From goot, Japan

XHP-110

Hot air pencil with in built air and Vacuum pump. Optional Vacuum pen help to hold component. 210 watt, temp range 200-420 °C, vac. Pressure -130mmHG.Ideal for small chip cap resistor and small SMD Components. From goot, Japan

GSR-200GSR-200

SMD rework system with bottom Heater to avoid any Damage to Multilayer PCB due to themal stress. consist of XFC-200, XPR-600, XK-1. From goot, Japan

GSR-300/301

BGA rework system without auto Lift. Consist of XFC-300 top Heater, XK-1 tool arm, XPR-600 Bottom Heater and XU-1 PCB Holder. From goot, Japan

GSR-302

BGA rework system with Bigger Bottom Heater and PCB Holder which remove problem of board sagging. Consist of: XFC-301 Top Heater, XPR-1000 bottom heater with PCB Stand (anti warping tool ), XK-2 tool arm along with XY Movement in microns. From goot, Japan




XPR-600

Bottom Heater air opening 58X58 mm, 630 watt and temp Range Variable 100-300 ° C. From: goot, Japan

XPR-1000

Bottom Heater IR Type 2100 watt, Temp. range room to 300 °C. PID Digital control. Heating area 270X 270 mm with PCB holder along with anti warping tool. From: goot, Japan

XU-1

PCB Holder Smooth sliding bar to mount and remove PCBs easily. Finest light wt material Dimensions 265(L)? 280(W)? 36(H) Max. PCB size 305mm X open side Weight 840g only. From: goot, Japan

XU-1S

PCB Holder with arm to hold PCB with component monted on edge also, Smooth sliding bar to mount and remove PCBs easily. Finest light wt material Dimensions 265(L)?280(W)? 36(H) Max. PCB size: 305mm X open side Weight: 900g From: goot, Japan

BGA Reballing Kit XRB-Series

dedicated Reballing kit for BGA, one kit for one

component, work perfect, professinal solution,

custom made per customer requirement. BGA

component require along with order.

From: goot, Japan

Illuminated magnifier for regular Inspection,3 times, High Quality lens ensure perfect for day long working without stress on eye. Electrostatic paint, high quality Material used for rugged Mechanical structure, translucent covers help focus light on work piece. Imported

E-230

SL-71

Flash light Magnifier. For any Manager or Supervisor for close Inspection in any Field. 10X system, Class in its own for inspection. Yellow Light for Better Visibility in Built scale. From Engineer Japan.

Before

After

BS-2

Do not through oxide tips as it do not hold solder, but can still perform soldering, use the Tip Refresher to improve work efficiency. It remove oxide and re tin tip for better performance of soldering.

Fume Absorber

Clean Noxious gases generated during soldering process. Must for clean work environment. Bench top and Clamp mounted type. Imported

AT-123FAAT-123ZFA

ST-51

Solder Reel Holder, can Take Maximum load of 1kg , Heavy base ensures extra stability, Guide spring to avoid solder tangle, Comes with carrying handle. Spindle diameter: 16mm From: goot, Japan

ST-77

Stand for soldering items heavy duty high quality Material, heavy base ensure stability, duel lining to avoid of direct heat pass to outer body of stand, soldering iron placement angle adjustable. 2 Sponge sheet and tray for removing ball to tray than running on surface of sponge making trouble to clean tip. From: goot, Japan

ST-40

Tip Cleaner No water necessary. It cleans better than conventional sponges. Less temperature loss compared with conventional sponges (due to Water). The holder is made of heat resistant and slip-proof silicon rubber that protects the tip from any damage during cleaning process. From: goot, Japan

E-230E-230E-230




Desol Wick CP-20B

High quality desoldering wick with Fine braided copper wire, saturated with RMA flux. Can be used without fear of damaging precision PCBs. Helps Better heat transfer to PCB due to special weaving. Remove effectively solder from PTH and clean also SMD Pad effectively. Width 2mm, other width are also available as special import for large quantity requirements. From: goot, Japan

DesolwickCP-2015High quality desoldering wick with Fine braided copper wire, saturated with RMA flux. Can be used without fear of damaging precision PCBs. Helps Better heat transfer to PCB due to special weaving. Remove effectively solder from PTH and clean also SMD Pad effectively. Width 2mm, other width available as special import for large quantity requirements. From: goot, Japan

2507-N

Resin and halide-free no-clean flux has excellent wetting abilities and leave no problematic residues. Excellent for prototyping, rework, and repair and to provide extra wetting for lead-free wire solder. Excellent Wetting, No Cleaning Necessary Specifications: Meets IPC Standard 7711 and ANSI J Standard 001C for circuit board repair and rework. From: Techspray USA

2505-N

Conductive Pen

From: Techspray USA

Contains a fast drying, silver filled ink designed to quickly make highly conductive silver traces. Repairs Traces, Makes Smooth Jumpers Specifications: Meets IPC Standard 7711 and ANSI J Standard 001C for circuit board repair and rework (4.9ml)

2509-GN

Overcoat Pen Green insulates circuit board traces and components against high voltage arcing. Provides excellent protection from moisture and fungus. Specifications: Meets IPC Standard 7711 and ANSI J Standard 001C for circuit board repair and rework From: Techspray USA

2510-N

Conformal Coating Remover Pen quickly and precisely removes most conformal coatings including acrylic, urethane, and silicone. Fast Str ipping Action, Non-Corrosive, Rapid Evaporation Flux Bottles / Solvent Dispenser (ESD): From: Techspray USA

Sponge

CS-17/625 Sponge sheet is from Plato, manufactured with pure cellulose (a wood derivative) to increase the life of the tips, and decrease De-tinning of tip. Available in 16.5 X 8.5 inch sheet. You can cut easily per your requirement, very economical also. From: Plato USA

1850

SOLDER FAULT MARKER highly visible orange coloring combined with a black light indicator ensures quick recognition. Marking agent is quick drying and can be removed with warm water or IPA, Contains Opti/Scan™ 10 ml Pen. From: Techspray USA

ECONO PACK

2111

RID-OX™ CONTACT PROTECTOR / ENHANCERAvailable in aerosol or pen dispenser, for quick, easy repair and maintenance. Cleans & Protects Contacts, Lubricates for Easy Insertion, Prevents Oxidation, Non-Corrosive, Safe on Gold and Platinum Connectors. Specifications: Pen - Meets Belcore standards, Alcatel 005-0214-060 2111-N 10 ml Pen. From: Techspray USA

Gold Guard

IF-8300-8

BGA Liqued Flux pen: develop for Manual Soldering and rework processes. Excellent results on both SnPb and lead-free alloys. Typical processes where BGA Liqued can be used are hand soldering, touch up, automated soldering, BGA Rework, The flux is absolutely halogen free, guaranteeing a high reliability after soldering. From Interflux Belgium.

IF-8300-8

BGA Liqued Flux pen: develop for Manual Soldering BGA Liqued Flux pen: develop for Manual Soldering

BON-102

ESD Safe and Refillable ( use Flux of your choice), Extra Brush available. Workout much economical for user. Flux easy to apply, No dirty table, Easy apply for high Precision Application, No extra flux on work space( IF -2009MLFE can be bought in 1 ltr pack also to refill).

Terrific RP 65

Terrific RP 65 VOC Free Flux develop for Manual Soldering and rework processes. Excellent results on both SnPb and lead-free alloys. Useful for hand soldering, touch up, automated soldering, BGA Rework, The flux is absolutely halogen free, guaranteeing a high reliability after soldering. From Interflux Belgium.




Bits For Hakko

Soldering tips and Desoldering tips From: Plato USA (Since 1950, Largest OEM in world)

for Hakko stations

Bits For Ersa

Soldering tips From: Plato USA (Since 1950, Largest OEM in world)

for Ersa stations

IF - 910

This help to separate metal from oxides in dross of wave soldering Machine. Even help to remove several impurity from bath From Inteflux, Belgium

IF-250-AO

Direct cost saving more than 50% and quality will improve. Effective solutions for excess dross, floating particles, poor heat transfer, lumpy solder, micro bridging, dirty PCB, save solder bar consumption & microscopic shorts. These are available with LEAD and LEAD FREE applications. From Inteflux, Belgium

Bits For Weller

Soldering tips and Desoldering tips From: Plato USA (Since 1950, Largest OEM in world)

for Weller stations

IF - 2009 MLE (ILTR)

No Clean VOC Free flux for hand soldering, dip soldering. Generate less fume, cleaner Joint, environmental friendly. from Interflux Belgium

IF-920

Cleans wettable nozzles in selective soldering systems, replaces adipic acid. From Inteflux, Belgium

IF-8300

No-clean, absolutely halide free tacky gel fluxes. For local application, rework and repair of BGA and other components. halide free, no-clean, hightack for component fixation, for SnPb and Pb-free alloys, low residue, long profile resistance dispensing syringes and can be liquefied asper utility using thinner in 30%. This flux is tacky and can hold SMD components & BGA. Standard packing is 100gm jar. From: Interflux Belgium

AT-180SD

ESDSAFE ESD

SAFE ESDSAFE

High Quality ESD Safe Solvent Dispenser. Stainless steel pump. Imported

Neddle Flux Dispenser

Dispense precise amounts of liquid without dripping,spilling, or waste. Unique, no leak design! Meets ANSI (J-STD-001B) made from durable material. FD-21 for NON Esd and SF-02 for ESD Version. From: Plato USA

Brush Scrub Bottle

Inexpensive and safe method to spot clean P C B a s s e m b l i e s , Compatible with IPA, Hexane, and Acetone, SB-2N: 2 oz.(nylon bristles) works for general flux removal. SF-B2HS: 2 oz. (ESD bottle with natural horse hair) works for general flux removal. SF-B2HH 2 oz. (ESD bottle with natural hog bristles) works for general flux removal or difficult, sticky, crusty, or viscous materials. From: Plato USA

Liquid Dispensing Bottle

BC-250:

SF-250 —same as above but

Polyethylene bottle way to wet sponges of soldering station and dispense liquids at the work bench without waste.

static dissipative plastic that provides electrostatic discharge protection to meet DOD-STD-1686 and MIL-B-81705,




Solder Wire

IF-14: High quality solder wires for Pb-free and SnPb alloys, colophony free, absolutely halide-free, low residue, easy brush able residue from Interflux Belgium. IF-NC series: No Clean solder wire. From: Interflux Belgium

IF-2005M

Low solids no-clean flux, evaporate during the soldering process. Very safe to use in high-reliability application circuits. No contact problems caused by post-solder flux residue. This halide free flux meets all Bellcore and IPC and is QPL-listed. It provides great solderability on HAL, NiAU and OSP-coated PCB's. MIL-F-14256F approved, high compatibility with conformal coating without cleaning appareance : clear, colorless liquid, density at 20° : 0.808 g/ml, solid content 1.8 %, J-std-004A class: OR/ L0, acid number : 14-16 mg KOH/g From: Interflux Belgium

The No-Clean Solder Wire is developed as the final solution to eliminate the use of solvents for c l e a n i n g i n t h e electronics industry. Flux i n te g rate s a re n e w generat ions of Low Residue Liquid Fluxes. The Flux Formula leaves minimal residues and makes cleaning completely unnecessary. Its excellent wetting and fluxing activities allow the residues to remain without the need of removal, and yet comply with the JIS corrosion test requirements. Available standard alloys are: Sn63Pb37 other alloys upon request.From: Interflux Singapore

IF-NC-81

Lead Free Solder Wire specially formulated for use in the electronics industry. new generations of Low Residue Liquid Fluxes. The IF-LF-61 Flux is clear, colourless, non-corrosive and gives an extremely high e l e c t r i c i n s u l a t i o n resistance value. Its excellent wetting and fluxing activities allow the residues to remain without the need of removal, and yet comply with the JIS corrosion test requirements. Available standard alloys are: Sn96.5Ag3.0Cu0.5 and Sn99.3Cu0.7 other alloys upon request From: Interflux Singapore

IF-LF-61

IF-2010F

Low solids VOC free, no-clean flux evaporate during the soldering process. Thus, making it very safe to use in high-reliability application circuits. Flux is for spray and foam a p p l i cat i o n s . N o co nta c t problems, caused by post-solder flux residue. This halide free flux meets all Bellcore and IPC requirements. It provides great solderability on HAL, NiAU and OSP-coated PCB's. appearance : colourless, density at 20°: 1.00g/ml, solid content 2.5 % J-STD-004A class : OR/ L0, acid number : 16 mg KOH/g From: Interflux Belgium

IF-2009MLF-ELow solids VOC free, no-clean flux, designed to evaporate during the soldering process. It reduce dramatically solder ball formation in wave soldering processes. Flux is for spray application. This halide free flux meets all Bellcore and IPC requirements. It provides great solderability on HAL, NiAU and OSP-coated PCB's. PacIFic 2009MLF-E also provides excellent solderability on lead free alloys. appearance: transparent liquid, density at 20° : 1.00g/ml,solid content 3.5 %, J-std-004A class : OR/ L0, acid number:24 mg KOH/g From: Interflux Belgium

Solder Bar

High Quality solder Bars for Pb-free and SnPb alloys. extensive range, bars, pellets and solid wires, SnPb and Pb-free alloys, high purity, low oxidation levels low consumption.

Solder PasteThe Interflux® is a no-clean solder paste with extra activation for difficult to solder surfaces. increased activity, easy cleanable, cleaning before wire bonding, SnPb and Pb-free alloys, ICT testable.• IF-9009 The Interflux® is a no-clean solder paste with extra activation for difficult to solder surfaces. increased activity, easy cleanable, cleaning before wire bonding, SnPb and Pb-free alloys, ICT testable. • Delphine no-clean, absolutely halide free solder paste series. Absolutely halide free, no-clean, easy cleanable, ICT testable, low voiding, air, N2 or vapour phase soldering.• WSP 2006 Waste soluble: Absolutely halide free, water soluble solder paste, easy water washable, SnPb and Pb-free alloys, ICT testable From: Interflux Belgium


Direct Import by customer onlyStock Items Customer specific import only & mini order value applicable. Advance along with order is mustSI DI CI

VOC Free Flux: The advantages are water based flux are lower consumption, no halide, very less fumes, no risk of

fire, less micro solder balls, wide process window, no smell on production floor, None needed - no thinner is

required, suitable for LEAD FREE applications , high ICT first pass yield, no rosin or flux bodies present & ISO 14000

and RoHS compliance. flux meets all Bellcore and IPC requirements. It provides great solderability on HAL, NiAU

and OSP-coated PCB's. PacIFic 2009MLF also provides excellent solderability on lead free alloys.

9


2205/2006/2207

WONDERMASK W: Quick drying water-washable mask. Quickly and easily removed with in-line and batch cleaning systems. • Non-Corrosive • Low Odor •Non-Flammable Spec: Meets MIL-STD-2000 paragraph 5.3.18 parts a, b, andd.(Hand Applications:2 2 0 5 , R o b o t i c & P n e u m a t i c Applications 2206-Silk and Template Screening Applications: 2207 From Techspray USA

WONDERMASK PL : Natural latex peelable solder mask with fasted cure time. Fastest Full Cure Easily Peelable Highest Strength to Avoid Breakage Non-Flammable Specifications: Meets MIL-STD-2000 paragraph 5.3.18 parts a, b,and d.STD Packing : 2218-8SQ 8 oz. (237mL) squeeze bottle; 2218-G 1 gal. (3.8L) in plastic jug ; 2218-54G 50 gal. (189.4L) in plastic drum From Techspray USA

2218FASTEST FULL CURE

1977

Silicon Heat sink Compound ideal for Electrical applications ( temp Range -55 to 205 deg C) will not crack or Harden. From Techspray USA

1978

SILICON FREE Heat sink Compound ideal for Electronics applications ( temp Range -40 to 200 deg C) where Silicon contamination hurts Solder ability and Increase solder defect, will not Separate, crack or Harden. From Techspray USA

Vac Pen

Easy to pick up small part. Handi-Vac 4 Size of nozzle S, M, L, XL. Imported

WONDERMASK WSOL: Ideal water-washable mask for closed-loop systems. Quickly and easily removed with in-line and batch cleaning system • Safe on Ion Beds & Filters in Closed-Loop Cleaning Systems • 100% Water-Soluble • Non-Corrosive • Low Odors. 2204-8SQ 8 oz. (237mL) squeeze bottle, 2204-G 1 gal. (3.8L) in plastic pail. From Techspray USA

2204

2211-8SQ

This is based on synthetic latex and used to prevent soldering protected areas in a wave soldering process, very easy to apply smoothly, dry quickly, Non-corrosive, Non-flammable, suitable for LEAD FREE applications and easy to remove. Cure Indicator – Darkens As It Cures, Compatible with Gold and Copper Leads, Specifications: MIL-STD-2000 paragraph 5.3.18 parts a,b, and d.Ford Tox #039772. From: Techspray USA

Polyamide Glue

Polyamide glue stick. it can withstand high temperature, High adhesion strength, odorless, Solvent free. most suitable for Electronic assemblies. Imported or goot Japan

Interflux present range of Spray Fluxer units right from very economical to high end. Spray Fluxers are retrofit to your existing wave soldering machine. Our Spray Fluxer gives complete flexibility and process control in most economic way. Spray Fluxer helps to improve quality and reduce flux consumption From : Interflux Singapore

Spray Fluxer

USB Scope

Upto 450X inspection, Various Model to attaché with computer or with TV screen. From : Micro square Japan.

Magnification: 120- 1000 X ,High resolution 2M pixel(1600×1200) CMOS camera, Measuring function , XY stage standard can be connected to PC from Micro Square Japan

DS-3UX-SH DS-3 SERIESDS-3UX-SH




stand optional

Microscope with Camera

BGA and Soldering Inspection: Various Model to Inspect BGA after assembly, works on Prism principals. Magnification upto 140X. Can see under BGA all balls, any crack, via Holes of PTH and even solder fillet under SMD components leads. Easy connection to PC or TV From : Micro square, Japan.

SL-60 + SL-62:Stereo Microscope ideal for SMD inspect ion. Magnification x10/x20 switch able (Option: x20/x40). Wide field of view (dia. 23mm), Universal fluorescent lamp. 220x220mm full-flat wide working space . 1M ohm resistor built in earth cord for safety. With optional CMOS Camera & Software (Model SL-62), a microscopic image can be seen on personal computer, and distance measurement, attachment to e-mail, etc. are feasible on PC. Connect via USB Connection. From :Engineer, Japan.

600X magnification,1.3 MB resolution Camera, connection through USB to PC Wide Range of light. Data software to make different Measurements.From : Micro square, Japan.

DS-600

MS-Series

Auto Visual inspection for soldering included BGA. cost effective with more feature Packed From : Micro square, Japan.

MS-5000MS-5000MS-5000MS-5000

20 channel 3 channel 6 channel

EASY OVEN AND WAVE SETTING




A6

APS-70

AS Series ASC Series

AD SeriesASA-2000/4500 SeriesASA-4000M Series

ASA-7500/8500/9000 Series Air Screwdriver

Air Screwdriver Air Screwdriver90 deg bend angle

ASA-5000M

ASA 6500 Series

Air Screwdriver

Semi Auto shut off, Variable torque, accuracy ± 3%, works on 230 volt 30-40 watt consumption? AS-1632(0.2-2kgf-cm,1000RPM)? AS-4632 (2-18 kgf-cm, 1250RPM) ? AS-6632 (5-25 kgf-cm, 1000RPM) accuracy ± 3% . From ASA

Fully Auto shut off, Push to start, disk brake Mechanism, Variable torque, accuracy ± 3%, works on 230 volt 40 watt consumption ? ASC-3682(1.5-12kgf-cm, 850 RPM)? ASC-5682 (4-18 kgf-cm, 1000RPM) ? ASC-6682 (8-25 kgf-cm, 650RPM). accuracy ± 3%. From ASA

Fully Auto shut off, Push to start, disk brake Mechanism, Variable torque, accuracy ± 3%, works on 230 volt 50 watt consumption AD-8682 (20-50kgf-cm,650 RPM accuracy ± 3%. Pistol Grip type also available. From ASA

Fully Auto Shut off Low Volt DC to hand Piece, high reliability and consistence in torque. works on 230 volt and Hand Piece on 35 volt. Low Power consumption 30 watt. ? ASA-2000 (0.2-2kgf-cm,720 RPM) ? ASA-4500 (1.5-9.5 kgf-cm, 720 RPM) 90 deg bent available. Accuracy ± 3% From ASA

Fully Auto Shut off Low Volt DC to hand Piece, high reliability maintance Free Swiss motor generate low inertia momentums, does not genrate Particals and suitable for clean room. works on 230 volt and Hand Piece on 30 volt. Low Power consumption 6 watt. 1-6kgf-cm, 290 gm wait & 1000 RPM, accuracy ± 3% From ASA

Fully Auto Shut off Low Volt DC to hand Piece, high reliability and consistence in torque. works on 230 volt and Hand Piece on 30 volt. Low Power consumption 30 watt. ? ASA-6500 (4-18 kgf-cm,1000 RPM) accuracy ± 3%? ASA-6000 (1.5-12 kgf-cm, 1150 RPM) 90 deg bent available.From ASA

Fully Auto Shut off Low Volt DC to hand Piece, high reliability and consistence in torque, Works on 230 volt and Hand Piece on 40 volt. Low Power consumption 30 watt. ? ASA-7500 (7-30 kgf-cm,1000 RPM) ? ASA-9000 (20-50 kgf-cm, 650 RPM) 90 deg bend, Pistol Grip type also available. Accuracy ± 3% From ASA

High Speed Low Inertia Low impact maintance Free Motor Fully Auto Shut off Low Volt DC to hand Piece, high reliability and consistence in torque. Works on 230 volt and Hand Piece on 30 volt. ASA-5000M (2-12 kgf-cm, 1800 RPM) ASA-5600(2-18 kgf-cm, 700 RPM) Accuracy ± 3% From ASA

Push to Start, Variable torque, auto shut off, Low air consumption ,Low Running cost air Screw driver. Special SRM Clutch Mechanism for high Accuracy ?A S A - T 3 0 P B ( 2 - 1 6 k g f - c m 1 8 0 0 R P M ) , ? ASA-T40PB ( 5-30 kgf-cm 1000 RPM), ? ASA-T60PB ( 15-95 kgf-cm 550 RPM) . 90 deg bent, and Pistol Grip type also available. Accuracy ± 3% From ASA

Brushless Fully Auto Shut off Low Volt DC to hand Piece, high reliability and consistence in torque. Works on 230 volt and Hand Piece on 24 volt. ASA-4500BS (1.5-9.5 kgf-cm, 1000 RPM) 90 deg bent also available. Accuracy ± 3% From ASA

Push to Start, Variable torque, auto shut off, Low air consumption ,Low Running cost air Screw driver. Special SRM Clutch Mechanism for high Accuracy ?ASA-T30PB ( 2-16kgf-cm 1800 RPM), ? ASA-T40PB ( 5-30 kgf-cm 1000 RPM), ? ASA-T60PB ( 15-95 kgf-cm 550 RPM) . Pistol Grip type also available. Accuracy ±3% From ASA

Lever Start, Variable torque, auto shut off, Low air consumption ,Low Running cost air Screw driver. Special SRM Clutch Mechanism for high Accuracy ?ASA-T30LB-R/A(2-16kgf-cm,1800 RPM), ? ASA-T40LB-R/A ( 5-30 kgf-cm 1000 RPM), ? ASA-T60LB-R/A ( 15-95 kgf-cm 550 RPM) . Accuracy ±3% From ASA

ASA-4500BS

A2

SCREW ASSEMBLY SOLUTIONS www.advancetechonline.in


o90 Right Angle Head4A-9121 for ASA-2000 & ASA-4500

4A-9123 for ASA-65004A-9122 for ASA-7500/8500/9000.

Torque Cover

4H-1089 for ASA-2000 & ASA-45004H-2053 for ASA-6500

4H-2052 for ASA-7500/ASA-90004H-2055 for AD-8682

4H1068 for AS-SERIES

BalancerSB-1.2

0.5 to 1.2 kg (1.6m)

10(0.4)

44.5

(1.8

)

35.2

(1.4

)

90 Degree Head For Electric Screw driver

Torque Cover avoid change of Torque on line

Para-ARM Tool Holder DI-4B-25

DWT-200

Screw Feeder

CD-100M

Oil Cylinder and air cylinder type for mounting of AIR and ELECTRIC tool. Arm Holder avoid torque reaction to Operator hand, for safety. Help repeatable assembly task with accuracy. For Easy and efficient Operations. From : ASA

Balancer SB-1.2

Torque Meter for OIL PULSE TOOLS, AIR TOOLSautomatic and semiautomatic Torque wrench 0.30-25.00 NM. From : Cedar Japan

Torque tester for testing only torque wrench,

torque Range 7.0-200.0 NM.

Digital Torque meter to test Torque wrench, Electric screw driver and fully auto shut off Air screw driver, CD-100M Range 1-100 Kgf-cm (0.1-10NM) CD-10M Range 0.1-10 Kgf-cm (0.010-1NM) From :Cedar Japan

CD-100M

Screw feeder upto M5 screw, Max Length 25 mm.

add efficiency to your Line. Slim Modules for small

screw also available. From : Quicher Japan

DI-1M-IP Series

Digital Torque meter to test Torque wrench, AIR TOOLS any type, OIL PULSE TOOLS and angle nut runner. Various Model Range 0.3-500 NM accuracy ±0.5% from Cedar Japan

DIS-IPS Series

Digital Torque meter to test Torque wrench, AIR TOOLS ( automatic and semiautomatic) any type and angle nut runner. Various Model Range0.0 2NM to -20 NM accuracy ±0.5%, many programming feature, Ow joint no need to rewind from Cedar Japan

DI-11

Torque Meter for High Torque electric screw drivers Torque wrench 0.10-20.00 NM. From : Cedar Japan

DIS-IP Series

Digital Torque meter to test Torque wrench, ( automatic and semiautomatic)

Range 2 mNM to 500 NM accuracy ±0.5%, many programming feature from Cedar Japan

AIRTOOLS any type and angle nut runner. Various Model

High Quality Spring Balancer Max Wt 2 KG. Smooth and High quality spring for pull push ensue fatigue free working in production line, Rope use is of High quality Material, do not produce particles unlike steel rope create flakes. Which cause problem on production line?



Rotate Torque Tester

NTS-6

DIS-RL SeriesDI-9M-8DI-9M-08

Ultra small torque measurement Digital Torque meter to test Torque wrench, Electric screw driver, DI-9M-8:(0.020-80Kgf-cm),DI-9M-08:0.200-8 Kgf-cm. Accuracy ±0.5%, OW Joint ( no need to rewind to test again) From: Cedar Japan

Startup Rotation Torque and Load torque under rotation can be Measure. Range 0.3 mNm to 2Nm. Suitable for Precision Gear Motor strain Meter etc. From : Cedar Japan

To measurement very small torque of 500 or less mN-m Since the detection part was small and a light weight, minute torque measurement which needs prudence for handling was enabled. Model available upto 6NM with Facility like, Yes-no decision,,Average calculation, Data storage is 800 affairs., A convenient functional setup of a setup of a measurement start value etc., Data output at real time (every about 1/180 seconds)., USB terminal data output to PC From: Cedar Japan

DIS-RL Series

To measurement very small torque of 500 or less mN-m Since the detection part was small and a light

Screw Driver Bits (Any Type)

High Quality Imported Long Life Screwdriver tips

DI-9M-08

DIW

Digital Torque Wrench for quality Management range 0.2-120 NM accuracy ±0.5% from Cedar Japan

DI-12

Slip Torque tester to test forward exact tigten toque of already fitted Screw.0.030-15NM From : Cedar Japan

DID-4

Digital Screw Driver for quality Management range 0.030-4NM accuracy ±0.5% from Cedar Japan

VIA SETTER auto screw feed and tight solution helps to maintain Fatigue free operations and Increase efficiency. Screw driver can be electric or Pneumatic. UNLIKE OTHER MAKER Fujitec Years of experience Made Machine work smoothly without much interruption on production line From Fujitec Japan

MK-3020MK-3020MK-3020MK-3020

HP-100

Economical Torque Meter 1 100 Kgf-cm force. ~Imported

AUTO Bench type screw Tightening ROBOT From: Janome, Japan

SCREW ROBOT

SCREW COUNTER

This instrument work well with ASA Electric screw driver for Mistake Proofing line. One Can set no of screw per Job and then counter count for good or no good signal. if all set screw is good then output signal to PLC and Operator Can proceed for next job, else Buzzer sound for No Good job.



Apron Model - AT - 400AA

AT-9100-PCE AT-713ASW

AT-37ABAT-500PPHB

AT-201FCP AT-200ARM

Wrist Band WS-101-1006

Adjustable band, Easy to wear, good conductivity,

washable & Anti-allergic, RoHS compliance. The 6~7surface Resistance is 10 ohm. Imported

Fabrics is suitable for ESD working environments, surface resistivity 10 (5~9) o h m . I t c a n q u i c k l y neutralize and dissipate static charge & prevent ESD damaging products. This can be washable, light w e i g h t , g o o d a i r permeability and good filtration also. These aprons are available in small, medium & large sizes in white and blue color. (RoHS compliance) Imported

Size Available : Coats: Small, Medium, Large, Extra LargeColor : Sky Blue, White (5mm Grid Pattern)

ESD Gloves: ESD Carbon Palm P/U Coated Glove No scratches or contaminations on the finish products, Dissipating static with carbon yarn quickly, Reusable after washing,Uniform resistivity through the entire glove, Surface

7resistivity:2.1 X 10 Ω meets Ce EN388:2003 Various other type also available for Large quantities order. Imported

White color, special treatment in the middle sole maximizes the deodorant properties, front mesh design for easy air movement & comfort, Velcro close top for easy wearing, washable and surface

5 ~8resistance 10 ohm. The available sizes are small, medium and large. Imported

These items are used in clean room made of PP materials, easy to wear without any stress on head. The available color is Blue and one box contains 200 nos. Imported

These ESD brushes can take Heat resistance up to 80 deg. C., mild chemical , acid resistance &

4 ~6surface resistivity of the handle 10 ohm and 10bristle 10 ohm. The length is 170mm and bristles

30mm (L) x 7mm (W). Imported

AT-2436SM

Remove Heavy dust from bottom of shoes/slipper. Blue color with 30 layers. One packet contains 10 mats and the size of each mat is 24” X 36”. This mat is made from high quality low density polyethylene materials & non-transferring adhesive. Helps to Maintain less dust in working area. Imported

AT-9100-PCEAT-9100-PCE AT-713ASWAT-713ASWAT-713ASW

AT-500PPHBAT-500PPHBAT-500PPHB

ESD Pink color finger cots are powder free, no holes, triple Wash , easy to use with 100% biodegradable natural Latex (Latex finger cots are guaranteed to meet 4.0 AQL Level S3 sampling plan per MIL-STD-

9~11105E. The Surface Resistivity 10 ohm and one packet contains 1440 nos. comes in vacuum sealed Packing. Imported

GS-101RED Gloves

Green color, size 1m X 10m & thickness 2mm with 2 layers (Top green is Static Dissipative & bottom black is conductive). The surface Resistance for

6 8rubber mat is 10 ~ 10 ohm. Rubber Mat are much more durable and Environment Friendly. Other colors are also available minimum order qty. of 1000Sq. meter or more. Imported

H i g h Q u a l i t y superior PVC Dot, constant s u r f a c e r e s i s t i v i t y

6~7 between 10ohm/sq. Recommended to use in class 1,000 environment. Face side anti-slipping PVC dot back side Polyester with conductive yarn, 9mm stripe. Washable Imported

AT-5100-PC

Nylon Palm P/U Coated Glove Preventing scratches & contaminations and having a good grip. PU coating on the palm & fingertips areas. No sweats on the hands and a good breathability. Lowering dust & lints while working, Excellent fitting provided by seamless knit construction., Meet Ce EN388:2003. Imported

FG-101

Heel grounder are good abrasion electrostatic dissipative property with, cost effective & loose fastening assembly. Cup is made of conductive

6rubber & elastic ribbon. Resistance 10 ohm + 10% abrasion (conductive ribbon) 0.45-0.55g (RoHS compliance) Imported

AT-5100-PCAT-5100-PC

ESD / CLEAN ROOM SOLUTIONS www.advancetechonline.in


AT-402DSC

Disposable Shoes Cover

Imported

Soft, easy to process, not easy to broke or fractured. Good chemical resistance. Package 100 nos./Box Color Blue.

1720: ZERO CHARGE ESD-SAFE FLOOR COATING converts any sealed floor to an ESD-safe surface with resistivity between 106 to 1010 ? . High gloss finished for use in electronic production areas, computer rooms, hospitals, and other areas with static sensitive equipment. Slip Resistant, Effective in Low Humidity, Zinc Free Specifications: General Dynamics, Boeing Aircraft (BAC5485), Unisys, NFPA 56A, USDA Approved.

1721: ZERO CHARGE FLOOR STRIPPER Alkaline, non-ammoniated floor stripper which removes builtup wax, synthetic floor finishes, and embedded soils. Intended for use to prepare a floor for Zero Charge ESD-Safe Floor Coating (1720). Effective with Hard and Soft Water Specifications: USDA Approved, NFPA 56A,

1722: ZERO CHARGE FLOOR CLEANER/NEUTRALIZER Cleans scuffs, dirt, and other contamination without leaving insulative waxes and brighteners. Also neutralizes floor surface to prepare for Zero Charge ESD-Safe Floor Coating (1720). Non-Corrosive, Neutral pH, No Phosphates, Leaves No Soap Scum,.

ESD Flooring and cleaner products

17211720

1722

1726-QT

ZERO CHARGE ANTI-STAT COATING Fast drying, anti-static coating eliminates static charge and reduces triboelectric generation from flexible surfaces. Ideal for plastics, fabrics, and carpet. Non-FlammableFrom: Techspray USA

1733-QT

ZERO CHARGE MAT & TABLETOP CLEANER, Clean flux and other residues off of ESD-Safe mats and tabletops. Rejuvenates ESD-Safe Mats, Will Not Dry Out Surfaces, Leaves No Insulative Film, Non-Flammable, No Ammonia, Non-Corrosive. From: Techspray USA

1702

ZERO CHARGE HAND LOTION I m p r o v e s c o n t a c t b e t w e e n personnel and grounding devices such as wrist straps and heel straps. Does not contain silicone, lanolin, and other materials found in conventional hand lotions that can interfere with PCB manufacturing. Blend of moisturizers, aloe vera, and vitamins A and E penetrate rapidly leaving skin soft without a greasy film. From: Techspray USA

1755-10SLICRON™ PERMANENT ESD-SAFE COATING adheres to metal, plastic, and most other surfaces. Ideal for changing standard bumpers, bins, tools, and surfaces to ESD-safe, saving ex p en s i ve rep l acement co st .

6 8Resistivity between 10 to10 ohms, Translucent Spec. : Meets or exceeds the EOS/ESD Association Test Methods ANSI/EOS/ESD-S11.11-1993 and ESD STM4.2-1998. 10 oz aerosol (coats @200ft) From: Techspray USA

ex p en s i ve rep l acement co st .

Licron Crystal™ 1756-10

A revolutionary and innovative concept in PERMANENT STATIC DISSIPATIVE COATINGS.Versatile, crystal clear urethane coating that adheres to metal, plastic, and most other surfaces. Ideal for converting standard bumpers, bins, tools, and other surfaces to ESD-safe, saving expensive replacement cost. The end result is compliant with ANSI/ESD-S20.20, which prevents static damage to sensitive electronic components. Licron Crystal operates from 0-100% humidity. The cured coating is durable, will not chip and maintains

7 910 -10 ohms resistivity. Licron Crystal can be sprayed. The finish will be clear. A grounding wire can then be attached (i.e. by conductive adhesive) similar to an ESD floor. • Complies with ANSI/ESD-S20.20 • Superior Adhesion to Variety of Surfaces: Glass, Plastic, etc. • Non-Ozone Depleting •From: Techspray, USA

6 8Economical Antistatic Slipper Resistance 10 - 10 Ω. Antistatic PVC Upper and EVA Sole. Imported

AT-207 series : Durable ESD slipper Made of super polyurethane material. Single Mold, Cushion effect for fatigue free working, Non Slip Pattern. Surface

6 9resistivity 10 to 10 . Ω Imported

AT-107ASSLP-Series AT-207-Series



NEW

Static Elimination Solutions from SSD Japan:

Experienced company since 1934 in Ionization Solutions, SSD developed Many NEW Technologies.

HF-Technology: HF( High Frequency Technology): it works on Low Voltage and can be able to generate Ion at 2 KVA. Which make this Technology to work for

application where Ionizer itself need to be very close to object to avoid EMI effect? This Technology ensure Longer time to maintain Balance, However small

maintance like cleaning emitter is require time to time. Special Emitter (Tungsten alloy special by SSD) in combination with HF technology Give Longer Life of

emitter itself. Proprietary auto Ion Balance (which is achieved by feedback control) is part of this technology. HF Technology Maintain steam of ion which can

be Balance in qty anywhere near or away from Ionizer (Unlike in DC Technology a particular distance require to maintain.) also This High density of ions stream

can be transported through tube till end object, which is not possible in DC or AC Technology.

HDC-AC Technology: Shishido Electrostatic ( SSD) was the first in the world to succeed in developing an AC high-voltage power supply that can obtain a high

voltage of 20 KVp-p, even at low frequencies. This innovation allowed SSD to realize a compact, high-voltage transformer ( no big external transformer or

cables). Ionizers Can perform for longer time Balance alarm. This technology have enabled balanced static elimination through the generation of large,

uniform amounts of ions, stable elimination of static can always be performed regardless of the status of the charged object. Even In the event of no

Maintaince or cleaning of tip this technology can work well effectively.

Ion Gun Trigger type works on Works on HF technology, High quality special alloy Tungsten emitter. Proprietary Ion balance, LED Indication for any Abnormality. From SSD, Japan

Ion Gun Trigger type works on Works on HF technology, High quality special alloy Tungsten emitter. Proprietary Ion balance, LED Indication for any Abnormality. Ideal for Continuous Operation. From SSD, Japan

BF-2ZA BF-2DD BF-4ZII

Works on HF technology Air flow Control and High quality special alloy Tungsten emitter. Proprietary Ion balance, LED Indication for any Abnormality. From SSD, Japan

Bench top Ionizer work on DC technology, Air flow

Control and High quality special alloy Tungsten

emitter. From SSD, Japan

Horizontal type Ionizer works on AC Technology, Variable Air Flow in Large Volume through twin Blower and High quality special alloy Tungsten emitter. Many models available as per your requirement. From SSD, Japan

BF-2MA

Works on HDC-AC technology, High quality

special alloy Tungsten emitter. Proprietary Ion

balance, Long Distance Ionization. Over Current

Indicator, Air Flow controller, Fan speed Indicator.

Virtually Maintaince Free From SSD, Japan

Over Head Ionizer works on HDC-AC technology, High quality special alloy Tungsten emitter. Proprietary Ion balance, Long Distance Ionization. Over Current Indicator, Air Flow controller, Fan Jam Indicator. Virtually Maintaince From SSD, Japan

BF-OHP3A

Over Head Ionizer works on HDC-AC technology,

CABX

CABCAGZ-IIZapp

Ion Bar works on HDC-AC technology, Low Air consumption nozzle design, Low Power consumption, High quality special alloy Tungsten emitter. Proprietary Ion balance, Long Distance Ionization. Alarm for any abnormal condition. Virtually Maintaince Free: Size from 350 to 2350 MM various model. From SSD, Japan

Latest Ion Bar works on HDC-AC technology, Small Size and high level performance as AIR BAR IONIZER in the world, Low Air consumption nozzle design opetional, Low Power consumption, High quality special alloy Tungsten emitter. Proprietary Ion balance, Long Distance Ionization. Alarm for any abnormal condition. In Built timer function notice you the maintenance for cleaning the emitter with lighting LED alarm. Virtually Maintaince Free, Various Sizes available. From SSD, Japan



DZ-4

ZE-106 ZE-103-100 ZE-102

Static charge Meter, Rotational sensor to Measuremant at Flexible angle, Error indication for damage sensor. From SSD Japan

Multi Function static Measurement Instrument, can do various Operations. From SSD Japan

Continuously monitor the connections to earth of

the Wrist Strap and Work Surface.

A tool to Measure static charge Attenuation Behavior/ Static Half Life measurement of Material,Data from H-0110 deliver to V2 Analyser, which help to Make Easy anylyses and report Analyses software. From SSD Japan

wrist band Tester, Calibration certificate is

included.

Wrist Band and foot wear tester check all ESD footwear including conductive and antistatic range (Calibration certificate is included. )Foot Plate Model Z-103F for Z-103-100 is optional. Instruction Board Model Z-103B for Z-103-100 with instrument holder.

Static Honest meter H-0110 and Analyzer V2

Electrometer Statiron DX

Wall Mount

Foot Plate

Floor Stand

Foot Plate

Floor Stand

Precisely designed, manufactured and packaged to serve a wide variety of cleaning and maintenance needs. TechSwabs are manufactured in accordance with

Techspray's rigid specifications, using specialized materials to ensure low particle generation. Cotton swabs are the most economical choice for high volume

usage. Foam swabs are ideal for more precision cleaning where linting needs to be avoided. COTTON TECHSWABS: Tightly wrapped, pre-cleaned

cotton ensures the least amount of extractable contaminants. CHAMOIS TECH SWABS:Synthetic chamois tip offers soft, durable, and low linting tape-

head cleaning. Heat bonding prevents adhesive residues on sensitive surfaces. FOAM TECHSWABS:All foam swabs are manufactured with 100 pores

per inch reticulated polyurethane foam, which ensures excellent absorbency while minimizing contamination. Tips are affixed by heat seal to prevent tip loss,

even while saturated with solvent. Flexible tips provide versatility and softer touch, while rigid heads allow for more aggressive cleaning. FIBER OPTIC

TECHSWABS:Foam fiber optic swabs are ideal for removing transmission disrupting contaminants in bulkhead connectors. The head conforms to the

various connector shapes, cleaning the conductor bulkhead corners inside the bulkhead pocket. Foam fiber optic swabs are an economic choice over

wrapped swabs. Tips are heat bonded, so no contaminating glues have been used.From TECHSPRAY USA

TECHSWABS

Cotton ChamoisFoamFiber Optic



Techspray offers a large array of wipes for a variety of applications, including cleanroom, PCB rework, polishing, and

maintenance. A large number of different materials are available to meet each unique requirement. All Techspray

wipes have the following advantages:

General Purpose Wipe H y d r o e n t a n g l e d cellulose/polyester wipe with high absorbency a n d e x t r a l o w particulate count and no chemical extractables. Class 100 Cleanroom Certified High Absorbency Very Low Particulate Count Specifications: Exceeds U.S. Air Force requirements for surface contamination, HP 9300-1618 STD Packing 100 nos. 9"x9" c-fold wipes. From TECHSPRAY USA

2350-100

T E C H C L E A N TMABSORBWIPE For

Sensitive Surfaces V e r y s o f t a n d a b s o r b e n t h y d r o e n t a n g l e d polyester wipe for cleaning optical equipment, fiber optics, and other sensitive surfaces. Non-abrasive Extremely soft Highly absorbent std Packing : 2351-100 100 4"x4" flat wipes and 2352-100 100 9"x 9” flat wipes. From TECHSPRAY USA

2351-2352

T E C H C L E A N U L T R A W I P E Textured Scrubbing Wipe Patterned, hydroentangled cellulose/polyester wipe is designed for aggressive scrubbing. Texture provides abrasive surface, but will not scratch most sensitive surfaces. Textured Surface Scrubs Without Scratching Tear Resistant STD Packing 100 Nos 12"x12" flat wipes. From TECHSPRAY USA

T M

2354-100

T E C H C L E A N PURWIPE TM Low-Linting Poly Wipe 100% polyester wipe is a strong, lowlinting wipe that is idea for SMT stencil cleaning and PCB rework. Tear resistant to allow cleaning around leads without fraying. Very Low Particulate Count Tear Resistant STD Packing : 100 Nos. 9"x9" flat wipes. From TECHSPRAY USA

2355-100

T E C H C L E A N TWILL WIPE Tear Resistant Cotton 1 0 0 % c o t t o n t w i l l w e a v e d e s i g n e d fo r wiping abrasive surfaces. Tear resistant to allow cleaning around leads without fraying. Low static generation, so good for static sensitive areas. Tightly Woven 100% Cotton Tear Resistant Low Static Generation STD Packing 100 Nos. 6"x6" flat wipes. From TECHSPRAY USA

2357-100

T E C H C L E A N SMT WIPE Lint-F r e e F o a m Polyurethane f o a m w i p e designed for cleaning surface mount stencils and screening equipment. Fiber-free foam does not generate lint, which can clog fine pitched stencils and cause misprints. Fiber-Free Construction — No Linting Will Not Snag on Stencils Tear Resistant Std Packing 50 nos. 9"x9" flat wipes. From TECHSPRAY USA

2358-50

T E C H C L E A N M A I N T E N A N C E W I P E Hydroentangled cellulose/polyester wipe with high absorbency. Economical, but very high quality wipes are ideal for production and maintenance applications. High Absorbency Economical STD Packing 300 nos. 9"x9" flat wipes. From TECHSPRAY USA

2359-300ANTI-STATIC WIPE Polyester wipe that is i n t e r w o v e n w i t h DuPont's NEGA-STAT carbon yarn. NEGA-STAT dissipates static charge, prevent ing s t a t i c build-up and allowing dissipation. Perfect for dry wiping ESD-sensitive components and boards. Tear resistant to allow cleaning around through-hole leads without fraying. Anti-Static — Will Not Generate Charge ESD-Safe Very Low Particulate Count Tear Resistant Std 150 Nos. 9"x9" flat wipes. From TECHSPRAY USA

2362-150

SMT Lint Free roll Made for SMT Printer Stencil Cleaning. different weight paper available. We need information of Make of printer, core length, core Dia, Paper Dia and width in order to Make offer. From TECHSPRAY USA or other sources

SMT ROLLS

a n d e x t r a l o w

• Low Linting

• Double-Bagged to Avoid Contamination

• No Chemical Extractables.

WIPES www.advancetechonline.in


TRE-03-NB

Durable long life, soft Grip Cutter for day long work. Cut 1.3 mm copper, From: Piergiacomi, Italy.

TRE-03-AB

Durable long life, soft Grip Cutter for day long work. Cut 1.3 mm copper, safety clip hold cut part of lead.From: Piergiacomi, Italy.

TRE-03-NBD

Antistatic Durable long life, soft Grip Cutter for day long work. Cut 1.3 mm copper, From: Piergiacomi, Italy.

TRR-5000

Durable long life, soft Grip Cutter for day long work. Cut 2.59 mm copper and 0.5 mm Steel wire. simple intervention of screw will help to remove play between two faces. From: Piergiacomi, Italy.

YN-4

Very slim head Micro Nipper for dense area working or Hard to reach area. Long cut head. over all Length 120mm. From : goot, Japan.

170

Micro shear cutter for Electronics Industry. Max cutting capacity 1mm. shear principal make long life for blade and less cutting effort.Cushion grip. From Plato USA

1755

All time Popular rugged tool, work on shear principals can cut Flat Cable, co-ex, Nickel, Kovar. From Plato USA

TR-5000 Series

Hight cutter cut at fix distance according to Model. Available for 1,1.3,1.5 mm hight from PCB. From Piergiacomi, Italy.

TR5000W

Front flush cutter hight from PCB is adjustable as per requirement upto 5 mm max cutting capacity 1.3 mm dia copper. From Piergiacomi, Italy.

NS-04

Ultimately professional Micro Nipper. Material S58C harden to 58HRC Capacity 1.2 mm. perfection in jazz alignment is ultimate. Size 115 mm. From Engineer, Japan

NZ-12

Nipper Full Flush and super-Fine cutting edge. Can work in Fine Pitch Lead(0.5mm Pitch).Reverse Blade keep clear front View during work. NON Slip Soft Grip. Material S55C. From Engineer, Japan

Micro Nipper small size very easy to fit in hand. Material S58C harden to 58HRC Capacity 0.8 mm size 105mm. ideal for PCB Related work. From Engineer, Japan

NS-06

HAND TOOLS www.advancetechonline.in


90-175

Plastic Nipper Harden for 56-60 HRC. Cutting Capacity increase 20% by cutting edge Technology MICRO MIRROR BLADE DEVELOP BY LATEST ENGINEERING KNOW-HOW from Fujiya Japan.

NK-36

Heavy Duty Diagonal Cutting Nipper, Made of S58C harden to 60HRC. Cutting Capacity copper Ø3.2 mm. steel wire Ø2 mm. From Engineer, Japan

NZ-05

Fine Chip cutter, Material S58C harden to HRC 58, Opening angle adjuster, Sharp and Slender design of Jazz to work in dense area, max cutting Capacity 0.6mm copper. From Engineer, Japan

NK-26

Diagonal Cutting Nipper, Made of S55C harden to 58HRC. Opening angle adjuster. Tool has stripping Hole Ø1.2 and 1.6mm. Cutting Capacity copper Ø3 mm, steekl wire Ø 1.9mm. From Engineer, Japan

Diagonal Cutting Nipper, Made of S55C harden to

Micro Nipper cutting capacity 1.2 mm copper, Fine nose for dense area working material S58C harden 58 HRC. Jazz Opening angle adjuster clip. Size 115 mm. From Engineer, Japan

Model NSX-04

HEAT NIPPER

The electric-heated nipper designed for cutting rubber, Styrene plastic, Glass Rasin and acrylic materials. Key point of blades of these nippers heat up when cutting, they do not crack or break resin. Imported

HS-TR30N

HT-200HT-200

KT-8

Cable cutter for 16mm sq Cable from Paladin USA. KT-12: Cable cutter for 35 mm sq CableFrom Paladin, USA.

KT-12 custom import

600-150

Cable cutter for 16mm sq Cable. From Fujiya,Japan.

600-200

Cable cutter for 36mm sq Cable. From Fujiya ,Japan.

KT-70

Cable cutter to cut cable upto 70 mm sq. from Paladin, USA.

HS-10

Pneumatic Cutter flush Cutting. Length 124 mm, wt. 198 gm, dia 36 mm, air consumption 116 cm3/sec. air pressure 4-6 kgf/cm3, Blade S4 had cutting capacity copper 1.6 mm dia and iron 1 mm Dia. Imported

S4S4

HS-10 HS-20

Pneumatic Cutter flush Cutting. Length 155 mm, wt. 398gm, dia 45 mm, air consumption 230 cm3/sec. air pressure 5-6 kgf/cm3, Blade S5 had cutting capacity copper 2.6 mm dia and iron 2 mm Dia. and SS 1.6 mm. Imported

S5S5



YP-4

Long Serrated Nose Pliers. From : goot, Japan.

Mini Pliers YP-1

Mini Short Nose Pliers From : goot, Japan.

PM-06

Precision Round Nose Pliers made of S58C Material and Harden to 58HRC, size 150 mm, From Engineer, Japan

PS-01

Precision Miniature serrated Nose Pliers made of S58C Material and Harden to 58HRC, size 125 mm, From Engineer, Japan

PS-04

Precision Miniature NON serrated Nose Pliers made of S58C Material and Harden to 46HRC, size 123 mm, rectangular point section. From Engineer Japan

PZ-55

Screw Plier helps easy to remove for Damage Head, Frozen, Rusted, special or unique Head screw. Harden 56HRC SS MaterialS58C with special design for better grip. From Engineer Japan

PNE-01-NB

Serrated Flat short Nose Pliers. HRC 48-50 Harden 3mm wide Jazz and total Length 144mm of tool. From: Piergiacomi Italy.

O

20

TPP-TR-6000R

Pneumatic cutter Flush cut. Cutting Capacity 1.6mm From Piergiacomi, Italy.

O20

TPP-TP-6000

Pneumatic Cut and Bend tool (CUT & CLINCH). From Piergiacomi, Italy.

2KT 35 (240mm )

Rachet Cable cutter to cut wire upto 240 mm sq. neat cutting. Model upto 400 mm sq also available.From Paladin, USA

CSP Series

Three in one tool stripper-nose pliers-cutter. 54-56 HRC Harden. CSP-30.1: 0.25 to 0.81 mm (30-20 AWG), CSP-30.2: 0.81-2.59 mm (20-10 AWG). From: Piergiacomi Italy.

Wire stripper and Cutter adjustable 26-18 AWG.From Piergiacomi, Italy.

CSF-30S



Adjustable stop lengthand scale

Cutter on bottommeans less hand force

required

68 individual spring-compression bladesto adjust precisely to

the insulation on Pro 6.

PRO 6

The high-quality stripax® Pro 6 (28-10 AWG (.08-6 2 2mm ))and Pro 16 (28-10 AWG (.08-6 mm )) strip

wire respectively. nick-free stripping of insulation with no damage to conductors, Built-in cutter provides a smooth, straight cut without distorting the conductor. Auto adjustable to the insulation thickness. From Paladin, USA.

PTZ-40

Bakelite Tipped Tweezer 135 mm long From Engineer, Japan

102

SMD Tweezers to Pick small SMD chip without slip From: Piergiacomi, Italy

TS-100

Ceramic Tweezer 100% anti-magnetic shielded tip does not generate static electricity so it is perfect for handling precision electronic parts safely. Heat resistant ceramic tips, usable for long periods with high durability. The materials used for the body have excellent resistance to acid and alkaline chemicals making it perfect for pharmaceutical applications too.From : goot, Japan.

Fiber Optics strip & Kevlar cutter

Fiber Optics strip and Kevlar cutter Various Models. From Piergiacomi, Italy.

PA-13

PA-Series

Super Light weight pull type wire stripper stripping 8-30 AWG, Unique Gripp design to fit Human Hand. length of wire canadjust with strip Gauge Length.PA-11 ( 12-24 AWG),PA-12 (8-18 AWG), PA-13 (22-30 AWG) From Engineer, Japan

PA-11PA-11PA-12

SC Series

SC1/S Cable stripper for cables Outer Jacket Ø 4 to 16mm, SC2/S for Ø8 to 28mm with adjustable internal blade for insulation Thickness. Extra Blade is std Part of tool. From Piergiacomi Italy.

Anti magnetic anti acid SS material, durable and high quality Standard Tweezers TS-10: Precision Tweezers Standard length 120 mm wt 19 gm , TS-11: Precision Tweezers long length 140 mm wt 15 gm , TS-12: Precision Tweezers extra strength tip length 115 mm wt 15 gm, TS-13: Precision Tweezers Round length 120 mm wt 19 gm ,TS-14: Precision Tweezers extra Fine length 125 mm wt 17 gm,TS-16: Precision Tweezers Curved length 115 mm wt 15 gm From: goot Japan Various other tweezers also available contact back.

TS-10

TS-11

TS-12

TS-13

TS-14

TS-15

TS-10

TS-11

TS-12

TS-13

TS-14

TS-15

R e p l a c e a b l e E n g i n e e r i n g P l a s t i c , P P S (Polyphenylenesulfide) Tip body Antimagnetic Body Including SS shank, Anti acid and chemical resistance. Heat Resistance upto 270 Deg C (ASTM D648) From Engineer, Japan

ESD Plastic Tipped Tweezer

Anti Magnatic,Heat Resistance upto 1000 deg C, High Insulation, wear Resitance, Anti corrosive. From Engineer, Japan

Ceramic Tiped Tweezer



Ceramic Aligner Series

Ceramic aligner (Zirconic Ceramic Tip ) for HF Coil adjustment. From: goot Japan and Engineer Japan

PN 5040

Perform Component at 90 deg without stress. From Piergiacomi, Italy

PNR 5000

Component cut and Kink forming tool, length setting possible. From Piergiacomi, Italy

Extractor tool specially designed for the extraction of PLCC from Socket without damage to Socket. Antistatic Grip and Dedicated design for each PLCC helps to work better and no damge to Expensive PCB’s. Available for 32, 44, 52, 68 and 84 pins. From Piergiacomi, Italy.

PLCC Extractor

HB-80

Industrial Grade Glue Gun 60 watt PTC Heater with safety fuse. Perfect design no dripping. From : goot, Japan.

SA-10

Solder assist, tools to help in repair rework for various operations. From: goot, Japan

Curved needle

Tapered needle

Stainless steel brush

Spring hook

Tapered reamer

Brass brush

Offset chip holder

OSplit 45 lever

Square scraper/chisel

O45 chip holder

Slotted shaft

Knife

8000 Series

Crimp tool with interchangeable dies for applications like Electrical, Coaxial,Twisted Pair,Fiber Optics crimping. From Paladin, USA

1600 Crimp Tools

Premium Crimp series for professional, Small Grip is easy to Hold. Tools for applications like Electrical, Coaxial, Twisted Pair, Fiber Optics crimping. From Paladin, USA

PA-08, PA-10 & PA-15

Precision Microscopic crimp for open Barrel terminals in one squeeze operation. PA-08 (18-20AWG for crimp point insulation barrel and 18-20AWG wire barrel.)PA-10 : (22-24 AWG for crimp point insulation and wire barrel.) PA-15 (14-18 AWG for crimp point insulation barrel and 16-20AWG wire barrel) From Engineer, Japan

PA-09 & PA-20

Precision Microscopic crimp for open Barrel Pliers PA-09 (AWG 32~ 20) and PA-20 (AWG 28~16) From Engineer, Japan

PAR-20

Ratchet crimp tool, Crimp Precision terminal, sheath and wire simultaneously 20-26 AWG.From Engineer, Japan

PA-09 & PA-20

Precision Microscopic crimp for open Barrel Pliers for Molex, JST, AMP (Tyco), JAE,HRS connectors (18-28 AWG). From Engineer, Japan



PIN EXTRACTOR from connenctor AMP Mini Universal Mate-N-Lock for both Pin and Socket Housing. SS-30 inner saleev: Ø1.9 mm, Outer Saleev Ø2.5mm. SS-32 inner saleev: Ø2.4 mm, Outer Saleev Ø2.9mm. SS-34 inner saleev: Ø2.7 mm, Outer Saleev Ø3.2mm From Engineer, Japan

SS-30/32/34

Interchangeable Screw driver set with tester in built content Θ3 and 5mm PH #1,#2, Hex 5.5 mm, Awl. From Engineer, Japan

DK-06

Interchangeable Screw driver set with tester in built content Θ5mm PH #00,#0,#1,#2,#3. From Engineer, Japan

DK-05

DK-05P & DK-06P

DK-06P: Interchangeable Screw driver set with tester in built content Θ3 and 5mm #1,#2, Hex 5.5 mm,Awl. In econo Pack. DK-05P : Interchangeable Screw driver set with tester in built content Θ5mm #00,#0,#1,#2,#3. In econo Pack. From Engineer JapanJapan

DK-04

Nut Driver Set Hex 3,3.5,4,4.5,5,5.5,6 mm. From Engineer, Japan

DK-16

Mini Soft Driver Set, Comfortable soft Grip, Chrome Vanadium steel and Perfectly Heat treated, Black oxide and Chrome Plated Point., + #00,#0, Θ 4X0.5mm, Θ 3X0.4mm From Engineer, Japan

DK-02

Hex Driver Set most popular size in Vinyl Pouch (cross head1.5,2,2.5,3,4,5 mm) From Engineer, Japan

DK-03

Ball Driver Set most popular size in Vinyl Pouch (across flat 1.5, 2, 2.5, 3, 4 mm) Ball Head work at 30 Deg off axis, heat treated alloy steel with Electroless Nickel Plating, Magnetized Point. From Engineer, Japan

TWB-01

Ball Head(Magnatised) hex wrench set. Ball (across flat 1.5, 2, 2.5, 3, 4,5,6 &8 mm) Ball Head work at 30 Deg off axis, heat treated alloy steel with Electroless Nickel Plating, Magnetized Point. From Engineer, Japan

o30

TWH-04

Hex Key Wrench Set (TWH-04 : Metric Size and TWH-05 Inch size.) From Engineer, Japan

TS-03

Mini combination Spanner set, thickness 1.5~2 mm. From Engineer, Japan

TWS-05

Socket wrench Set contain the complete combination of most needed sockets. Made of Chrome molybdenum steel sockets and Chrome vanadium ratchet Handset. From Engineer, Japan



KSC-06

Tool Kit for Field Maintance Job including cordless soldering Iron. All tools are professional quality. From Engineer, Japan

KSC-04

Tool Kit for general Electronic Job including cordless soldering Iron. All tools are professional quality. From Engineer, Japan

KS-11

Tool Kit for Field service & Maintance of production line and Machinery. All tools are professional quality. From Engineer, Japan

KS-10

Tool Kit for Field Maintance Job. All tools are professional quality. From Engineer, Japan

KS-16

Tool Kit with soft shoulder Bag. All tools are professional quality. From Engineer, Japan

TWS-06

Socket wrench Set contain the complete combination of most needed sockets. Made of Chrome molybdenum steel sockets and Chrome vanadium ratchet Handset. From Engineer, Japan

TWM-03

Smart Monkey Wrench 2mm thin profile,works well to tight BNC connectors or knobs mounted on cabnits where space is less. From Engineer, Japan

TWM-01 to 05

Heavy duty adjustable wrench, soft Grip for easy handling. Various sizes, also Thin Profile 2 mm from Model TWM-03 for BNC Co-axial connector or Volume Knob etc tightening. From Engineer, Japan

TL-20

Tool Kits for Professionals for Electronic Maintenance consist of 20 Items, All tools Made in Japan. From goot, Japan

KS-30&31

Tool Kit with hard ABS Bag with shoulder carry Facility. All tools are professional quality. From Engineer, Japan

DPP

Pneumatic tool designed to eliminate all depannelling problems cost effectivey. The interchangeability of the blades, made from special steel in various thicknesses, enable to satisfy all customer requirements. DPP20N (2mm), D P P 2 3 N ( 2 . 3 m m ) , D P P 2 4 N ( 2 . 4 m m ) , DPP25N(2.5mm) From Piergiacomi, Italy.

Electrical operative Forming and Cutting Machine for Loose PTH components. Several forming Mask available for different Shapes of Forming From Piergiacomi, Italy.

2000SE



1570-QT Stencil Cleaner

CLEANING SOLUTIONS ENVIRONMENTAL FRIENDLY: innovative solutions that combine the best of current “green” ®technologies to make the most powerful green cleaners on the market. Techspray has applied over 30 years experience

in solvent cleaning to formulate products that meet regulatory standards with major ecological advantages, but no performance trade-offs. TECHSPRAY RENEW™ products are designed through close coordination with end-users, ensuring that first and foremost, the products have superior performance. Performance is our top priority, using the best “green” solutions as they become available. All TECHSPRAY RENEW™ products are non-ozone depleting, have very low VOCs (Volatile Organic Compounds), and no GWP (Global Warming Potential). All formulas are biodegradable with packaging that is easily recyclable and, when feasible, made from recycled materials.

Low Ecological Impact: TECHSPRAY RENEW™ products have low VOCs (Volatile Organic Compounds), a major component of smog, and have no global warming impact (measured as GWP – Global Warming Potential). This helps your facility to comply with local, state, and federal environmental restrictions.

Low Toxicity & Biodegradable: Healthier for both personnel and environment, cleaners break down quickly, reducing long-term waste in landfills. (Appropriate disposal depends on what is being removed.)

Sustainable Materials: Instead of engineered solvents, we use corn-based ethanol, seed oils, soy-based oils, citrus-based oils, and other natural, sustainable ingredients.

Recycled/Recyclable Packaging: Most packaging is easily recyclable and, when feasible, made of recycled materials.Regulatory Compliance: Compliant with CARB (California Air Review Board), European REACH (Registration, Evaluation, Authorization & Restriction of Chemicals) and WEEE (Waste Electrical and Electronic Equipment Directive). These products do not contain RoHS (Restriction of Hazardous Substances) restricted substances, SVHC (Substances of Very High Concern) listed substances, or halides.

TMECO-STENCIL Cleaner Effectively removes all types of solder paste (e.g. water-based, RMA, noclean, lead-free) and uncured adhesive from screens, misprinted boards and equipment. Completely safe on stencils, squeegees, and equipment surfaces. Ideal replacement for IPA cleaners, which are often prohibited because of safety and environmental restrictions on VOC (Volatile Organic Compound) emissions or waste disposal issues. One quart (with a trigger sprayer) and one gallon containers are ideal for surface and tool cleaning. Convenient pre-saturated wipes available in a pop-up dispenser. Wipe material is lint-free and resistant to tearing and shredding. Quickly clean paste or uncured adhesive Biodegradable Safe for stencils, tools, misprinted boards Low VOC, zero GWP Non-flammable Non-ozone depleting From: Techspray, USA

TMSMT CLEANING: ECO-OVEN Cleaner Cleans reflow ovens, wave soldering systems, and associated heat exchanger systems by removing all types of flux residues (e.g. water based, RMA, no-clean, lead-free). Used for periodic preventative maintenance to keep equipment performing at peak levels. It is fast acting and more effective than IPA for baked-on flux residues. eliminates the need for aerosol propellants, which can have a global warming impact. Quickly clean flux residue from oven & wave fingers Biodegradable Safe on warm ovens Low VOC, zero GWP Non-flammable Non-ozone depleting, 1 qt trigger spray Packing. For bulk packing contact Back. From: Techspray, USA

1573-QT Machine Cleaners

ECO Cleaner & De-greaser 1500 also available for cleaning of heavy oil & greasesin Process Industries

ECO FRIENDLY CLEANERS www.advancetechonline.in


NEW

NEW

Flux removers (defluxers) remove flux residues left by manufacture, rework, or repair of printed circuit boards.Residues from higher, lead-free temperatures are more baked on and harder to clean. G3® and Ecoline™ flux removers have been proven very effective at removing fluxes baked on at lead free temperatures. Micro-components and fine pitch leads are delicate and easily damaged, so brushing and scrubbing should be avoided if possible. Both G3 and Ecoline have a powerful spray and strong solvent that blasts off residues and cleans areas under components that a brush cannot touch. (The use of G3 products for cleaning are subject to U.S. patent No. 5,902,412 and use is restricted by Techspray). All Techspray flux removers have the following advantages: RoHS Compliant Rapid Evaporation No Oily Residue Non-Corrosive

Patented defluxer formulated to be powerful and non-flammable, yet economical. Eliminates brushing and scrubbing, saving time and materials. Non-Flammable Powerful Cleaner Proven Effective for Lead-Free Processes Non-Ozone Depleting Specifications: B-28680, Ford Tox #167834 Aerosol Packing From Techspray USA

1631: FLUX REMOVE

The power of G3, but specifically formulated to avoid and clean white residues caused by no-clean fluxes. Non-Flammable Ideal for No-Clean Fluxes Proven Effective for Lead-Free Processes Non-Ozone Depleting From Techspray USA

1634: NO-CLEAN FLUX REMOVER

Complete Range of High Performance, High Precision Cleaning Solvents is Non-Flammable Low VOC Safe on Most Plastics Rapid Evaporation Residue-Free Non-Ozone Depleting Techspray has engineered solvent cleaners that offer exciting new options for precision cleaning. Precision-V cleaners are powerful, leave no residue, and evaporate extremely fast. Electronics, optics, and metal parts are quickly and thoroughly cleaned, eliminating the need for further rinsing. Precision-V is non-ozone depleting, so ideal replacement for cleaners containing CFC 113, HFC-141b and AK225. Exposure to Precision-V solvents is less hazardous than many other solvents commonly used in vapor-degreasers: e.g. TCE (Trichlororethylene, CAS #79-01-6), nPB (n-Propyl Bromide, CAS #106-94-5), and Perc (Perchloroethylene, CAS #127-18-4). Maintenance Cleaners remove oils, greases, silicones and other common industrial contaminants. Flux Removers clean R, RA, RMA and SA type flux residues after high temperature reflow, wave and hand-soldering. Ideal for lead and lead-free processes. Low VOC Formulas Formulated to reduce VOC emissions within your facility. Ideal for aviation and other applications where strict VOC caps apply (based on EPA VOC exemptions). Bulk chemicals ideal for cold/bucket cleaning (not intended for vapor degreaser). Available in different Packing. Precision-V Flux Remover, Vapor-Degreaser Formulas: Lower boiling point than most other vapor-degreaser which reduces heat-stress on components being reduces energy consumption from the boil sump. Precision-V Vapor-Degreaser Parts Cleaner Precision-V Vapor-Degreaser Flux Remover. For details Please Contact back to us . From Tech Spray USA

High Precision Cleaning Solventsfor Flux removing maintance, vapor

degreaser part cleaning or Flux removingNEW

FLUX CLEANERS www.advancetechonline.in


New: Techspray's new Turbo-Coat Acrylic Conformal Coating is designed to speed up board production throughput without additional investment of expensive UV systems or other capital equipment. Conformal coating cure time is often considered a production bottleneck for PCB assembly operations. Turbo-Coat dries tack-free in 3 minutes, allowing manufactures to handle boards in 1/3 the time of the leading acrylic coating! Full cure can be achieved as quickly as 10 minutes with elevated temperatures. Fastest Cure – Dry to Touch in 3 Minutes! Faster Throughput without Capital Investment Thick Coating – One-Pass Application Fast & Easy Rework & Repair IPC-CC-830 & MIL-I-46058C Tested UL94 V-0 Rated Crystal Clear & Glossy Finish UV Indicator for Black Light QC Inspection Toluene & Xylene Free Adjustable Spray head (Aerosol) From: Techspray USA

High speed Curing conformal Coatings.

Crystal Clear & Glossy Finish UV Indicator for Black Light QC Inspection Toluene & Xylene Free

CONFORMAL COATINGS Protect printed circuit boards (PCB) with Fine-L-Kote™ conformal coatings. Coating can either be sprayed or brushed, or boards can be dipped directly into the conformal coating for a thick layer of protection. Techspray offers a variety of coating formulas to match field and engineering requirements. Specifications generally depend on the type of protection needed: e.g. thermal, moisture, and static resistance. Coatings contain Opti/Scan to allow quality control inspection of coverage and evenness of the coating on a PCB. A coated board can be passed under a standard, low-cost UV (black) light, and the coated areas glow. The brighter the glow, the thicker the coating. All Techspray conformal coatings are Designed to Protect PCB's Can Be Removed for Rework or Repair Contain Opti/Scan for UV Inspection Non-Ozone Depleting. CONFORMAL COATING THINNER AND CONFORMAL COATING REMOVER ALSO AVAILABLE

Acrylic Conformal Coating is an economical choice that provides a hard protective surface. Commonly used on aviation components. Thermal Resistance — to 392°F (200°C) Dielectric Strength — 640 volts/mil Rigid, Hard Coating Specifications: Meets or exceeds MIL-I-46058C Type AR and IPC-CC-830 From Techspray USA

2103 FINE-L-KOTE AR

Silicone Conformal Coating offering protection for a wide variety of environments.UL Recognized Thermal Resistance — to 392°F (200°C) Dielectric Strength — 1100 volts/mil Moisture Resistant Chemically Resistant Vibration Resistant — Flexible Standard Viscosity — 4-10 CPS Specifications: Meets or exceeds MIL-I-46058C Type SR and IPC-CC-830. UL File Number UL746C. From Techspray USA

2102 : FINE-L-KOTE SR

High-Temperature Silicone Conformal Coating designed to prevent thermal shock with high temperatures. Offering protection for a wide variety of environments. Designed for High Temperature Environments Fast-drying Silicone — 1-Step Process Thermal Resistance — to 662°F (350°C) Dielectric Strength — 560 volts/mil Moisture Resistant Vibration Resistant — Flexible Specifications: Meets or exceeds MIL-I-46058C Type SR and IPC-CC-830. From Techspray USA

Urethane Conformal Coating is widely used in harsh chemical environments. Thermal Resistance — to 248°F (120°C) Dielectric Strength — 380 volts/mil Moisture Resistant Chemically Resistant Abrasion Resistant Specifications: Meets or exceeds MIL-I-46058C Type UR and IPC-CC-830. From Techspray USA

2106 FINE-L-KOTE HT2104 FINE-L-KOTE UR

NEW

CONFORMAL COATINGS www.advancetechonline.in


LDS-9000 series develop keeping in mind for Great Repeatability. in conventional air system dot size change with time. where as in this same dot size till end of barrel. Liner drive system work without air. Choice of three type of Gun LDAV, MDAV, SDAV ensure a very tiny dot size even to 0.000023 cc. system can be integrated forautomation through PLC with optional kit. all factory at different location can Have same out put just to enter Parameter setting in control unit. From Fishman, USA

TMAirFree Dispensing Systems

Designed to dispense watery fluids to thick pastes Model: 7100 is a durable workhorse that will provide endless savings for your assembly process. fluid move based on time foot Paddle pressed.Model: 7300 is a durable workhorse that will provide endless savings for your assembly process. Timer setting for quantity control of fluid .fluid move out based on time set on timed dispense cycle timer Can be activated and deactivated by userModel: 7500 is a durable workhorse that will provide endless savings for your assembly process. Timer setting for quantity control of fluid .fluid move out based on time set on timed dispense cycle timer Can be activated and deactivated by user, adjustable vacuum pick and place helping in placement of small components prior to bonding. Ideal for repair, rework, prototyping, small part placement and short run surface mount assembly. From Fishman, USA

TMAirPuls Dispensing Systems

7100 7300 7500

YD-1000

Air Pulse Dispenser to dispense watery Fluid to Thick Lard. Dispense time 0.01 to 31 second ±0.1%. From Y&D

YD-1000T

Air Pulse Dispenser to dispense watery Fluid to Thick Lard. Dispense time 0.01 to 31 second ±0.1%. Microprocessor based control/red-time digital display. With unique Teach Function From Y&D

DISPENSING SOLUTIONS www.advancetechonline.in


Barrel Filler to Fill from 330 Ml Cartridge to Small Cartage. From Y&D

YD 330G-BL

Large quantity liquids Can be dispense using pressure tank, valves of your choice and Controller from Fishman USA.

Ditto: Hand Dispenser with precision control. Each step positively displaces a known amount of fluid from the dispense tip. Adjustable dispense volume amounts. head seamlessly fits 3, 5 and 10cc AirFree reservoirs. Designed for fluid viscosities ranging from water to syrup, with reservoir sizes suitable for small dot to medium volumes. From Fishman USA

Pressure Tank with valveand controller

Precision Hand Dispenserand controllerand controller

Ditto: Hand Dispenser with precision control.

Precision Hand Dispenser

AirPulse Positive Displacement Valve Repeatability: +/-2%.

AirPulse Auger Valve Repeatability: +/-3%.

Fluid Density : Water to Paste, Volume: 0.0001 - 4.5cc

Fluid Density : Maple Syrup to Paste, Volume:0.0001 - 55cc

Various Valves

PositiveDisplacement

Valve

Auger Valve Needle Valve Diaphragm Valve Spray Valve

AirPulse Front Closing needle Valve Repeatability: +/-6%.

AirPulse Diaphragm Valve Repeatability: +/-10%.

Fluid Density : Water to Thick Paste, Volume:0.0005 - Continuous

Fluid Density : Water to Thin Oil,Volume:0.001 - 55cc From Fishman, USA

Barrel, Piston and Needles for Various dispenser suitability

MIXing of epoxy along with dispensing is easy in 1:1 or 2:1 ratio only, dedicated Valve system with pressure Tank. From Y&D

Optional controller require

2 PART DISPENSE

DISPENSING SOLUTIONS www.advancetechonline.in


ABOUT US

... ADVANCE TECH …Advance Tech started its journey in 1996 by making a foray into Engineering Enterprise with simple business Principles, i.e., Professional Dealing, Pro-active approach and Honesty.

Having this background for years, we understand well about our customer's needs and expectations from a reliable supplier.

SUPPLY LINE

We are a leading supplier of tool & equipment solutions for professional users. Supply and service line includes Equipment, Tools & Consumables for Electrical, Electronics, Automobile & Process Industry with other commercial, applications, including Electronic Maintenance.

APPROACH

Creating all infrastructures to cater our customer. We are always open to listen to our customer and provide them what extra they want from us, in order to improve our system and creating easiness to buy and support for after sale services apart from creating timely availability.

OUTLOOK

Our total Focus is on Indian Industry (Telecom, Defence, Medical Electronics, Auto Electronics, Space, Consumer Electronics and Electronics maintenance in Process Plants are the focus point)

JOURNEY

1996 - Exclusive distributor for Goot ,Japan1997 - Exclusive distributor for Plato Product Inc., USA1997 - Purchased New Delhi office premises1998 - Branch office started in Bangalore to cater south India customers. 2000 - Purchased Bangalore office premises2000 - (August) Exclusive distributor for ASA Enterprise Corporation, Taiwan 2000 - (May) Exclusive distributor for solder paste of Interflux, Singapore/Belgium 2000 - (December) Exclusive distributor for Piergiacomi, Italy.2002 - (June) Exclusive distributor for Paladin Tools ( Connect Tools inc) ,USA. 2003 - (June) Exclusive distributor for Engineer Inc, Japan (formerly Futaba Tool Mfg. Co. Ltd. Japan Brand Engineer)2003 - Purchased and shifted New delhi ofice to New and Biger Premises. 2004 - Onwards, we started sourcing several products from various countries to enhance our capability

of supplying 'optimum price performance' tools under our own brand of Advance Tech.2004 - New Space Purchased for store near office.2006 - Entered into Exclusive distributorship for Sheshido Electric Company, Japan2006 - Branch office started in Pune to cater west India customers.2007 - Won EFY Award for Soldering-Desoldering Category.2007 - Advance Tech Services registered as Advance Tech Services Pvt. Ltd.2008 - Exclusive agreement with Cedar Japan2008 - Exclusive agreement with Janome Japan2009 - New ERP Software implementations.

RAPPORTOur strategy is to build long-term partnerships with our customers. With their support, we aim to maximize the potential of our traditional business through a combination of enhanced quality of service, creative marketing, innovative pricing and cost-effective after sale service. Company's Head Office is located in New Delhi and branch offices in Bangalore and Pune with a dedicated Technical Team for fast action and effective results.Today Advance Tech supports huge customer base, which shows the confidence reposed on us.

For Soldering & Desoldering Equipment

Imported & Marketed by :

ADVANCE TECH SERVICES PVT. LTD.709 & 710, GD-ITL Tower,B-8 Netaji Subhash Place,Pitampura, New Delhi-110034Ph. : +91-11-47002024/25/26/27 Fax : +91-11-47002029E-mail : [email protected] : www.advancetechonline.inB.O. : • Bangalore • Pune

High Quality,InnovativeProducts

for Industries

vol. 2s3.amazonaws.com/machinetools_production/uploads/803705/...we acknowledge above logo are...

Documents