WALL WASH BAFFLE REMOVAL TRIM REMOVAL

NOTE: Wire dimming conductors as Class 1

Push tab (H) on the side of the light element (G) to release it from the adjusting mechanism. Slide light element (G) from the track system (I).

Slightly unscrew red screw (E) to allow vertical tilting of the adjusting mechanism (F).

Disconnect the quick connectors (J) between the light element and the driver. Remove light element.

Align light element (G) straight by rotating and tilting the adjusting mechanism (F), in order to proceed with its removal in the next step.

Correct straight alignment

Incorrect tilted alignment

G

F

G

J

E

F

H

I

For trim installation, detach trim (A) from ceiling and unhook from safety wire (B). Safely store it on the side.

A

B

For trimless wall wash installation, detach baffle (C) by using provided suction tool (D). Stick tool on baffle lens and pull.

D

C

FILE NAME:VOILA4-RECESSED-LIGHT-ELEMENT-REPLACEMENT-INST December 24, 2019

W W W . L U M E N W E R X . C O M

www.lumenwerx.com (T) 514-225-4304 (F) 514-931-4862 © All rights are reserved to LumenWerx ULC. Page: 1 / 2

LumenWerx ULC. reserves the right to change or modify product specifications without notification

VOILÀ 4 LIGHT ELEMENT REPLACEMENT - INSTRUCTIONS

1

4

2

5 6

3

Insert new light element (K) through tracking system (I) until an audible click is heard.

K

I

Hook safety wire (B) to trim (A) and reattach to ceiling.

Reposition light element in starting position and retighten red screw (E).

B

A

Connect new light element (K) to driver with quick connectors (J).

J

K

W W W . L U M E N W E R X . C O M

www.lumenwerx.com (T) 514-225-4304 (F) 514-931-4862 © All rights are reserved to LumenWerx ULC. FILE NAME:VOILA4-RECESSED-LIGHT-ELEMENT-REPLACEMENT-INST December 24, 2019 Page: 2 / 2

LumenWerx ULC. reserves the right to change or modify product specifications without notification

7 8 9

LIGHT ELEMENT REPLACEMENT - INSTRUCTIONSVOILÀ 4

10

E