vitamix manual 570

Download Vitamix Manual 570

Post on 13-Oct-2015

21 views

Category:

Documents

0 download

Embed Size (px)

TRANSCRIPT

  • All Models

    Vita-MixCorporationUse and Care Manual

    Read and Save These Instructions

    MIXN MACHINETMFrozen Treat Mixer

    F O O D S E R V I C E

    MIXN MACHINETMMIXN MACHINETM ADVANCE

  • 21. Read all instructions.2. To protect against risk of electrical shock, do not put motor enclosure in water orother liquid.

    3. Close adult supervision is necessary when machine is used by or near children.Children should be supervised to ensure that they do not play with the appliance.This appliance is not intended for use by persons (including children) with reducedphysical, sensory or mental capabilities, or lack of experience and knowledge,unless they have been given supervision or instruction concerning use of theappliance by a person responsible for their safety.

    4. Make sure the machine is sitting or mounted solidly on a sturdy surface or wallbefore using.

    5. Unplug the power cord from the wall outlet when the Vita-Mix machine is not inuse, before disassembling, putting on or taking off parts, and before cleaning, otherthan washing the agitator.

    6. Never contact moving parts.7. Do not operate any machine with a damaged cord or plug, if the machinemalfunctions, or has been dropped or damaged in any manner. In the US andCanada, call Vita-Mix Technical Support, 800-886-5235 at once for examination,repair, possible replacement, or electrical or mechanical adjustment. If you liveoutside the United States or Canada, contact your local Vita-Mix Distributor, ortelephone the Vita-Mix International Division at +1.440.782.2450 or emailinternational@vitamix.com for a distributor in your country.

    8. Do not use attachments not recommended or sold by Vita-Mix Corporation.Doing so will void the warranty. ALTERATION OR MODIFICATION OF THISPRODUCT IN ANY FORM IS NOT SUPPORTED AND AS SUCH MAY RESULTIN BODILY INJURY.

    9. Do not use outdoors.10. Do not let the power cord hang over edge of table or counter.11. Do not place the machine on or near a hot gas or electrical burner, in a heated

    oven, or allow machine to touch hot surfaces. External heat sources can damagethe machine.

    12. Keep hands, utensils and other items away from the agitator while motor isrunning to prevent the possibility of severe personal injury and/or damage to theVita-Mix machine.

    13. Always keep splash guard in place while running.14. When using the optional foot pedal control (for applicable models) make sure it is

    grounded and located where it will not be activated unintentionally. When themachine is not in use, turn OFF the power switch so the unit cannot accidentallybe started with the foot pedal.

    Important Safeguards

  • 315. CAUTION: For applicable models, the light in the front panel start/stop switch,when lit, indicates the power is ON and machine could start. Turn power OFF orunplug the machine before touching movable parts. Shut OFF power switch atnight or whenever machine will be left unattended.

    Enjoy the safety of this grounded machine. The Vita-Mix machines U.S. powercord comes equipped with a three-prong (grounding) plug which mates with a standardthree-prong wall outlet (Figure A). This cord will vary for countries outside theUnited States.Adapters (Figure B) are available for two-prong outlets. Do not cut or remove the

    third (ground) prong from the plug or power cord.Consult your electrician if you are not sure if the wall outlet is grounded through the

    building wiring. With a properly grounded two-prong wall outlet, ground the machine byattaching the tab on the adapter to the wall outlet cover by means of the screw in thecenter of the cover (Figure B).

    Save These Instructions

    Important Safeguards

    Figure A Figure B

    THREE-PRONG ADAPTERS ARE NOT TO BE USED IN CANADA.

    WARNING!

    The instructions appearing in this Use and Care Manual cannot cover every possible condition and

    situation that may occur. Common sense and caution must be practiced when operating and

    maintaining any applicance.

    IMPORTANT NOTES

  • 4CONTROL PANEL

    PowerSwitch

    Agitator

    Indicator Light

    Mixn Machine Advance Timer ModelPre-programmed with one pre-set blending cycle.COUNTERTOP

    ON/OFF Power Switch. This is a lighted switch. When light is lit, power is ON.Located on the front of the machine, the ON/OFF switch controls the power to themachine. While plugged in, switch to ON to ready the machine for blending. Shut OFFthe power switch at night or whenever the machine will be left unattended.

    START Actuator. The actuator starts the agitator and begins a pre-set timed blendingcycle when the machine is ON. Push the actuator to activate a timed blending cycle.The machine will shut off automatically at the end of the pre-set time.

    AGITATOR. When the machine is turned ON and the actuator is pushed, the agitatorspins and mixes the product and other ingredients. (See page 12 for availableagitators.)

    LED Indicator Light. The LED light blinks when a blending program is 4 secondsfrom completion so that excess product can be spun off the agitator. The blinkinglight will get progressively faster to indicate that the program cycle is almost complete.When a new program is installed using a programming chip, the light blinks toindicate acceptance.

    Vita-Mix machines come with several different control options. Please be sure you are following the

    instructions for your model.

    MOUNTING KITS: Mounting Kits, with detailed instructions, are available for both the countertop

    and wall mount Mixn Machines.TM See Parts Lists on page 17 and 19 for kit details.

    IMPORTANT NOTES

    Actuator

  • 56

    MIXN MACHINE ADVANCEOFF

    ON

    Program DialPulse Switch

    Indicator Light

    Mixn Machine Advance ProgrammableModelPre-programmed with six blending options and pulse switch.COUNTERTOP

    ON/OFF Power Switch. This is a lighted switch. When light is lit, power is ON.Located on the front of the machine, the ON/OFF switch controls the power to themachine. While plugged in, switch to ON to ready the machine for blending. Shut OFFthe power switch at night or whenever the machine will be left unattended.

    START Actuator. The actuator starts the agitator and begins a blending cycle whenthe machine is ON. Push the actuator to activate a program setting. The machine willshut off automatically at the end of the program setting.

    AGITATOR. When the machine is turned ON and the actuator is pushed, the agitatorspins and mixes the product and other ingredients. (See page 12 for availableagitators.)

    PROGRAM Dial. The PROGRAM dial allows user to select a number of pre-programmedsettings. Machine will shut off automatically at the end of the program. Program isactivated only when the power switch is ON. See page 10 for programming details.

    PULSE Switch. The PULSE switch starts the agitator and can be used to quicklyrefresh product. Depress the switch and hold down as long as needed. The PULSEswitch can only be used when the power switch is ON.

    LED Indicator Light. The LED light blinks when a blending program is 4 secondsfrom completion so that excess product can be spun off the agitator. The blinkinglight will get progressively faster to indicate that the program cycle is almost complete.When a new program is installed using a programming chip, the light blinks toindicate acceptance.

    PowerSwitch

    Agitator

    Actuator

  • 6CONTROL PANEL

    Foot Pedal(sold separately)

    Mixn Machine Advance Variable SpeedModelCOUNTERTOP

    ON/OFF Power Switch. Located on the front of the machine, the ON/OFF switchcontrols the power to the machine and starts the agitator. While plugged in, switch toON to start blending and OFF to stop blending.

    AGITATOR. When the machine is turned ON, the agitator spins and mixes the productand other ingredients. (See page 12 for available agitators.)

    VARIABLE SPEED Dial. The VARIABLE SPEED dial allows user to select continuouslyvariable motor speeds. Dial is activated only when the power switch is ON.

    FOOT PEDAL Control (sold separately). The FOOT PEDAL allows the user hands-free power activation. Press and hold for ON. Release for OFF. (Refer to the Foot PedalsInstructions sheet, which is included with the pedal, for detailed operating directions.)Place the foot pedal where it will not be activated unintentionally. The foot guard is anadditional design feature that helps prevent unintentional use of the foot pedal.

    Vita-Mix machines come with several different control options. Please be sure you are following the

    instructions for your model.

    MOUNTING KITS: Mounting Kits, with detailed instructions, are available for both the countertop

    and wall mount Mixn Machines.TM See Parts Lists on page 17 and 19 for kit details.

    IMPORTANT NOTES

    Variable Speed Dial

    PowerSwitch

    Agitator

  • 7PowerSwitch

    Countertop

    Wall Mount

    PowerSwitch

    Mixn Machine Standard ModelCOUNTERTOP

    ON/OFF Power Switch. Located on the front of the machine, the ON/OFF switchcontrols the power to the machine and starts the agitator. While plugged in, switch toON to start blending and OFF to stop blending.

    AGITATOR. When the machine is turned ON, the agitator spins and mixes the productand other ingredients. (See page 12 for available agitators.)

    WALL MOUNT

    ON/OFF Power Switch. Located on the front of the machine, the ON/OFF switchcontrols the power to the machine and starts the agitator. While plugged in, switch toON to start blending and OFF to stop blending.

    AGITATOR. When the machine is turned ON, the agitator spins and mixes the productand other ingredients. (See page 12 for available agitators.)

    FOOT PEDAL Control (sold separately). The FOOT PEDAL allows