vision3 lighting - cascade lighting · patented ledsense® thermal management to keep led running...
TRANSCRIPT
Vision3 lightingVision3 Lighting manufactures high quality, outdoor architectural lighting products for the specification grade lighting industry. All Vision3 Lighting products are manufactured in California’s central valley at our in house brass foundry, CNC machine / fabrication shops, and painting & assembly facilities. We proudly label our products ‘Made in USA’.
DesignsDesigned for wet location applications, our products are tested and certified to U.S. and Canadian safety standards per UL1838 or UL1598. Our goal is to offer specific lighting solutions to problems defined by the architecture or environment. We accomplish this by producing superior quality lighting fixtures that utilize innovative designs, common sense solutions, and the highest quality raw materials.
Features• Patented knuckle that holds securely and provides non-incremental vertical aiming with an available option that also offers a full
360 degrees of rotational aiming with no dead spots.
• Exclusive ‘Joystick Aiming’ option that provides hot aiming capability in our sealed in ground fixtures.
• Expanded standard mountings selection allows for faster delivery and lower cost as compared to other manufacturers, who must do these as modifications or customs.
• Flush lens option on some models provides for improved water flow off of lens, decreasing the buildup of mineral deposits and debris.
• Captive screws used on canopies and faceplates where possible to prevent lost hardware during installation and maintenance.
• Water tight wire pass-thrus used on in ground fixtures to prevent water entry into ballast and lamp compartments.
• An emphasis on designing products with newer high efficacy lamp sources for energy efficient designs.
• Choice of fourteen (14) standard TGIC polyester powder coat finishes reduces the requirement of custom paint charges.
• Clear Anodized finish option available on most aluminum fixtures and provides corrosion resistant raw aluminum look that can’t be matched using powder coat.
ServiceVision3 Lighting takes pride in providing the highest level of Customer Service in the specification grade, landscape lighting industry. Our lead times are among the best with a 99% on time shipping record and many orders shipping early. We do our best to ship products to meet the dates required by the customer.
MaterialsVision3 products are CNC machined from 6061-T6 aluminum, C36000 brass, and 304 stainless steel or precision cast from C84400 manganese bronze and 356 marine-grade aluminum. Other components used to produce light fixtures that will endure the harshest of environments include: high-temperature silicone O-rings and gaskets, borosilicate tempered glass lenses, porcelain sockets with Teflon® coated leads, and black-oxide stainless steel hardware.
Pre-TreatmentOur machined and cast aluminum fixtures are pre-treated with a hexavalent chromium-free RoHS compliant coating prior to being powder coated with TGIC thermoset polyester powder coat. This six step process is vital to providing maximum corrosion resistance and a powder coat finish that will endure years of environmental abuse.
Natural MaterialsWe use only the highest quality raw materials and components to manufacture our lighting products, including: copper-free aluminum, solid brass, stainless steel, and cast bronze. These materials are comprised of metals that occur naturally in the earth and can be recycled. We minimize the use of composite plastics that create waste and normally get dumped into landfill sites. The metals we use in our products are 100% recyclable.
FinishesWe have fourteen (14) standard TGIC polyester powder coat finishes. RAL and Custom finishes are available at a premium charge. Consult your local Vision3 Lighting representative for information on these premium finishes. Machined brass and machined stainless steel products are available in three additional metal finishes. Cast Bronze products are available in two additional metal finishes. Consult your local Vision3 Lighting representative for standard finish samples. See inside back cover for photos of standard finishes available.
WarrantyMachined and cast aluminum components are warranted for 5 years against material defects. Machined brass and stainless steel components are warranted for 25 years against corrosion and material defects. Cast Bronze components are warranted for 25 years against corrosion and material defects. Electrical components, such as lamps & ballasts, carry the original manufacturer’s warranty. Consult your local Vision3 Lighting representative or contact Vision3 Lighting for a copy of our written warranty.
WebsiteFor the most current product information, company contact information, or to locate the Vision3 Lighting Sales Representative in your area, visit our web site at www.vision3lighting.com
What’s New?
Vision3 now offers a wide range of staff lights available with various mount options, lamp types, and head styles for ground mounted landscape or path lighting applications. See models PA11 thru PA22 for more information.
Features:• LED, halogen, and metal halide lamp types in sizes from MR16 to PAR20.• Options to allow for use on low voltage (12V) and line voltage (120/277V) systems.• Single or dual headed options available.• Side or rear mount knuckle bodies allow for use as down aiming path / area light, or
up aiming flood / accent light.• Fixed or adjustable stem options up to 48”.• Patented locking knuckle that locks and stays locked.
Staff lights
The Model IG2 in ground up light is now available with a ‘Short Housing’ option. This 6 1/2” housing is perfect for areas around trees where roots might be a problem, or in wood decks with clearance issues.
Features:• Available with 20W MR16 Halogen, 10W LED, or 12.5W LED sources.• Flush lens design reduces mineral deposits on lens.• Pour collar option allows for easy installation in concrete.
IG2 SHORT Housing
100W XM2 TransformerThe Model XM2 magnetic transformer is now available in 100W. This smaller sized, lower output transformer is perfect for use with LED fixtures and their lower power requirements.
Features:• 100W single circuit with low voltage circuit breaker.• NEMA style stainless steel enclosure.• Two voltage output taps (11V and 15V).• Wiring compartment with input and output terminals.• Removable timer and remote photocell options.
The DL3 ring mount fixture is now available with a ‘Perforated Cap’ option. The long cap creates a tunnel effect perfect for down lighting from trees or gazebos, while the perforations allow just enough light out of the side to create the perfect ambiance.
Features:• Available with MR16 Halogen (up to 50W), 10W LED, or 12.5W LED sources.• Molded silicone wire pass-thru and silicone O-ring creates a water tight housing.• Threaded cap for tool-less re-lamping.
Most Vision3 low voltage MR16 products are now available with a 12.5W LED module with integral driver, in addition to the 10W LED module previously available.
Features:• 12V AC or DC, L70 = 60,00 hours, >45 lm/W (12V AC).• Field changeable optics available in 3 distributions (19º, 34º, and 60º).• Push button selection of 4 light levels equivalent to 50W, 35W, 20W, and 12W
halogen.• Compatible with low voltage magnetic & electronic transformers.*• Dimmable with standard electronic low voltage phase dimmers.*• LED module is field replaceable. • LED driver utilizes dynamic transformer recognition to simplify installation and
patented LEDSense® thermal management to keep LED running at the optimum temperature.
* - contact Vision3 for transformer and dimmer compatibility information.
Perforated Cap DL3
12.5W LED
TABLE OF CONTENTS
FLOOD/ACCENT
Path/Step
Wall Mount
Sign
In Ground
Mounts
Ballasts
Accessories
Lamp Data/Photometry
12 Volt120 VoltMetal Halide
12 Volt
12 Volt120 VoltMetal Halide
12 Volt120 VoltMetal Halide
12 Volt120 VoltMetal Halide
63044
58
104116128
140148156
164172176
Product Guide 4
120 VoltMetal Halide
8896
6
58
104
140
164
178
216
230
244
Transformers 240
index 248
finishes 249
4
12 Volt
FL2 Page 6
PA1-STDPage 58
IG1Page 164
IG3Page 168
IG2Page 166
SL3 Page 144
IG4Page 170
DL2Page 22
PRODUCT GUIDE
MR16H/LED
WM1Page 108
SL1 Page 140
SL6 Page 142
FL20Page 8
PA1-FLSPage 60
PA1-FLLPage 62
PA1-RNDPage 64
PA1-HATPage 66
FL16Page 10
DL3Page 26
FL11Page 14
DL1Page 24
FL1Page 12
PA3, PA5Pages 74,76
PA7 Page 78
PA2 Page 72
PA1-CNLPage 70
PA1-CNSPage 68
PA16Page 82
PA11Page 80
PA18 Page 86
PA13Page 84
WM11, WM12Pages 104, 106
WM3 Page 112
WM8Page 114
SL8 Page 146
MR16H
FL13Page 18
FL17 Page 20
WM6Page 110
FLOOD/ACCENT
MR11H MR16H/LED
Path/ Step
WALL MOUNT
SIGN
IN GROUND
T4H/LED MR16H/LED MR16H
MR16H/LED MR16H
MR16H/LED MR16H
FL4Page 16
Metal Halide
FL21 Page 44
FL22Page 46
IG7Page 176
SL11 Page 156
SL12 Page 158
WM18 Page 130
120 Volt
FL14 Page 38
WM9Page 122
FL5 Page 36
WM4Page 120
SL9 Page 154
SL4Page 152
IG5 Page 172
MR16MH
FL12 Page 32
FL3Page 30
FL18 Page 34
FL9 Page 40
FL6 Page 48
FL15Page 50
FL19 Page 52
FL10Page 54
WM7 Page 118
WM15 Page 126
WM10 Page 134
WM16 Page 138
SL7 Page 150
SL2 Page 148
SL5Page 160
SL10Page 162
IG6 Page 174
IG7 Page 176
WM2Page 116
WM17 Page 128
WM13Page 124
WM5 Page 132
WM14 Page 136
MR16H
PAR20/T4MH PAR30/38MHMR16H PAR20H PAR30/38H MR16MH
PA17 Page 90
PA19 Page 94
PA22 Page 98
PA12 Page 88
PA14Page 92
PA21 Page 96
PA20 Page 102
PA15 Page 100
PRODUCT GUIDEPAR30/38HMR16H PAR20H
PAR20H
FLOOD/ACCENT
PAR20MH/T4MH PAR30/38mh
Path/ Step
SIGN
IN GROUND
WALL MOUNT
PAR20/T4MHMR16MH
MR16MH PAR20/T4MHMR16H PAR20H
MR16MH PAR20/T4MHMR16H PAR20H